#
##
+{ 'pragma': { 'doc-required': true } }
+
+# Whitelists to permit QAPI rule violations; think twice before you
+# add to them!
+{ 'pragma': {
+ # Commands allowed to return a non-dictionary:
+ 'returns-whitelist': [
+ 'guest-file-open',
+ 'guest-fsfreeze-freeze',
+ 'guest-fsfreeze-freeze-list',
+ 'guest-fsfreeze-status',
+ 'guest-fsfreeze-thaw',
+ 'guest-get-time',
+ 'guest-set-vcpus',
+ 'guest-sync',
+ 'guest-sync-delimited' ] } }
+
##
# @guest-sync-delimited:
#
# If that's the case users are advised to always pass a
# value.
#
-# @time: #optional time of nanoseconds, relative to the Epoch
+# @time: time of nanoseconds, relative to the Epoch
# of 1970-01-01 in UTC.
#
# Returns: Nothing on success.
# Initiate guest-activated shutdown. Note: this is an asynchronous
# shutdown request, with no guarantee of successful shutdown.
#
-# @mode: #optional "halt", "powerdown" (default), or "reboot"
+# @mode: "halt", "powerdown" (default), or "reboot"
#
# This command does NOT return a response on success. Success condition
# is indicated by the VM exiting with a zero exit status or, when
#
# @path: Full path to the file in the guest to open.
#
-# @mode: #optional open mode, as per fopen(), "r" is the default.
+# @mode: open mode, as per fopen(), "r" is the default.
#
# Returns: Guest file handle on success.
#
#
# @handle: filehandle returned by guest-file-open
#
-# @count: #optional maximum number of bytes to read (default is 4KB)
+# @count: maximum number of bytes to read (default is 4KB)
#
# Returns: @GuestFileRead on success.
#
#
# @buf-b64: base64-encoded string representing data to be written
#
-# @count: #optional bytes to write (actual bytes, after base64-decode),
+# @count: bytes to write (actual bytes, after base64-decode),
# default is all content in buf-b64 buffer after base64 decoding
#
# Returns: @GuestFileWrite on success.
##
# @guest-fsfreeze-freeze:
#
-# Sync and freeze all freezable, local guest filesystems
+# Sync and freeze all freezable, local guest filesystems. If this
+# command succeeded, you may call @guest-fsfreeze-thaw later to
+# unfreeze.
+#
+# Note: On Windows, the command is implemented with the help of a
+# Volume Shadow-copy Service DLL helper. The frozen state is limited
+# for up to 10 seconds by VSS.
#
# Returns: Number of file systems currently frozen. On error, all filesystems
-# will be thawed.
+# will be thawed. If no filesystems are frozen as a result of this call,
+# then @guest-fsfreeze-status will remain "thawed" and calling
+# @guest-fsfreeze-thaw is not necessary.
#
# Since: 0.15.0
##
##
# @guest-fsfreeze-freeze-list:
#
-# Sync and freeze specified guest filesystems
+# Sync and freeze specified guest filesystems.
+# See also @guest-fsfreeze-freeze.
#
-# @mountpoints: #optional an array of mountpoints of filesystems to be frozen.
+# @mountpoints: an array of mountpoints of filesystems to be frozen.
# If omitted, every mounted filesystem is frozen.
+# Invalid mount points are ignored.
#
# Returns: Number of file systems currently frozen. On error, all filesystems
# will be thawed.
'ip-address-type': 'GuestIpAddressType',
'prefix': 'int'} }
+##
+# @GuestNetworkInterfaceStat:
+#
+# @rx-bytes: total bytes received
+#
+# @rx-packets: total packets received
+#
+# @rx-errs: bad packets received
+#
+# @rx-dropped: receiver dropped packets
+#
+# @tx-bytes: total bytes transmitted
+#
+# @tx-packets: total packets transmitted
+#
+# @tx-errs: packet transmit problems
+#
+# @tx-dropped: dropped packets transmitted
+#
+# Since: 2.11
+##
+{ 'struct': 'GuestNetworkInterfaceStat',
+ 'data': {'rx-bytes': 'uint64',
+ 'rx-packets': 'uint64',
+ 'rx-errs': 'uint64',
+ 'rx-dropped': 'uint64',
+ 'tx-bytes': 'uint64',
+ 'tx-packets': 'uint64',
+ 'tx-errs': 'uint64',
+ 'tx-dropped': 'uint64'
+ } }
+
##
# @GuestNetworkInterface:
#
#
# @ip-addresses: List of addresses assigned to @name
#
+# @statistics: various statistic counters related to @name
+# (since 2.11)
+#
# Since: 1.1
##
{ 'struct': 'GuestNetworkInterface',
'data': {'name': 'str',
'*hardware-address': 'str',
- '*ip-addresses': ['GuestIpAddress'] } }
+ '*ip-addresses': ['GuestIpAddress'],
+ '*statistics': 'GuestNetworkInterfaceStat' } }
##
# @guest-network-get-interfaces:
#
# @online: Whether the VCPU is enabled.
#
-# @can-offline: #optional Whether offlining the VCPU is possible. This member
+# @can-offline: Whether offlining the VCPU is possible. This member
# is always filled in by the guest agent when the structure is
# returned, and always ignored on input (hence it can be omitted
# then).
# @bus: bus id
# @target: target id
# @unit: unit id
+# @serial: serial number (since: 3.1)
+# @dev: device node (POSIX) or device UNC (Windows) (since: 3.1)
#
# Since: 2.2
##
{ 'struct': 'GuestDiskAddress',
'data': {'pci-controller': 'GuestPCIAddress',
'bus-type': 'GuestDiskBusType',
- 'bus': 'int', 'target': 'int', 'unit': 'int'} }
+ 'bus': 'int', 'target': 'int', 'unit': 'int',
+ '*serial': 'str', '*dev': 'str'} }
##
# @GuestFilesystemInfo:
# @name: disk name
# @mountpoint: mount point path
# @type: file system type string
+# @used-bytes: file system used bytes (since 3.0)
+# @total-bytes: non-root file system total bytes (since 3.0)
# @disk: an array of disk hardware information that the volume lies on,
# which may be empty if the disk type is not supported
#
##
{ 'struct': 'GuestFilesystemInfo',
'data': {'name': 'str', 'mountpoint': 'str', 'type': 'str',
+ '*used-bytes': 'uint64', '*total-bytes': 'uint64',
'disk': ['GuestDiskAddress']} }
##
#
# @online: Whether the MEMORY BLOCK is enabled in guest.
#
-# @can-offline: #optional Whether offlining the MEMORY BLOCK is possible.
+# @can-offline: Whether offlining the MEMORY BLOCK is possible.
# This member is always filled in by the guest agent when the
# structure is returned, and always ignored on input (hence it
# can be omitted then).
#
# @response: the result of memory block operation.
#
-# @error-code: #optional the error number.
+# @error-code: the error number.
# When memory block operation fails, we assign the value of
# 'errno' to this member, it indicates what goes wrong.
# When the operation succeeds, it will be omitted.
# @GuestExecStatus:
#
# @exited: true if process has already terminated.
-# @exitcode: #optional process exit code if it was normally terminated.
-# @signal: #optional signal number (linux) or unhandled exception code
+# @exitcode: process exit code if it was normally terminated.
+# @signal: signal number (linux) or unhandled exception code
# (windows) if the process was abnormally terminated.
-# @out-data: #optional base64-encoded stdout of the process
-# @err-data: #optional base64-encoded stderr of the process
+# @out-data: base64-encoded stdout of the process
+# @err-data: base64-encoded stderr of the process
# Note: @out-data and @err-data are present only
# if 'capture-output' was specified for 'guest-exec'
-# @out-truncated: #optional true if stdout was not fully captured
+# @out-truncated: true if stdout was not fully captured
# due to size limitation.
-# @err-truncated: #optional true if stderr was not fully captured
+# @err-truncated: true if stderr was not fully captured
# due to size limitation.
#
# Since: 2.5
# Execute a command in the guest
#
# @path: path or executable name to execute
-# @arg: #optional argument list to pass to executable
-# @env: #optional environment variables to pass to executable
-# @input-data: #optional data to be passed to process stdin (base64 encoded)
-# @capture-output: #optional bool flag to enable capture of
+# @arg: argument list to pass to executable
+# @env: environment variables to pass to executable
+# @input-data: data to be passed to process stdin (base64 encoded)
+# @capture-output: bool flag to enable capture of
# stdout/stderr of running process. defaults to false.
#
# Returns: PID on success.
'data': { 'path': 'str', '*arg': ['str'], '*env': ['str'],
'*input-data': 'str', '*capture-output': 'bool' },
'returns': 'GuestExec' }
+
+
+##
+# @GuestHostName:
+# @host-name: Fully qualified domain name of the guest OS
+#
+# Since: 2.10
+##
+{ 'struct': 'GuestHostName',
+ 'data': { 'host-name': 'str' } }
+
+##
+# @guest-get-host-name:
+#
+# Return a name for the machine.
+#
+# The returned name is not necessarily a fully-qualified domain name, or even
+# present in DNS or some other name service at all. It need not even be unique
+# on your local network or site, but usually it is.
+#
+# Returns: the host name of the machine on success
+#
+# Since: 2.10
+##
+{ 'command': 'guest-get-host-name',
+ 'returns': 'GuestHostName' }
+
+
+##
+# @GuestUser:
+# @user: Username
+# @domain: Logon domain (windows only)
+# @login-time: Time of login of this user on the computer. If multiple
+# instances of the user are logged in, the earliest login time is
+# reported. The value is in fractional seconds since epoch time.
+#
+# Since: 2.10
+##
+{ 'struct': 'GuestUser',
+ 'data': { 'user': 'str', 'login-time': 'number', '*domain': 'str' } }
+
+##
+# @guest-get-users:
+# Retrieves a list of currently active users on the VM.
+#
+# Returns: A unique list of users.
+#
+# Since: 2.10
+##
+{ 'command': 'guest-get-users',
+ 'returns': ['GuestUser'] }
+
+##
+# @GuestTimezone:
+#
+# @zone: Timezone name. These values may differ depending on guest/OS and
+# should only be used for informational purposes.
+# @offset: Offset to UTC in seconds, negative numbers for time zones west of
+# GMT, positive numbers for east
+#
+# Since: 2.10
+##
+{ 'struct': 'GuestTimezone',
+ 'data': { '*zone': 'str', 'offset': 'int' } }
+
+##
+# @guest-get-timezone:
+#
+# Retrieves the timezone information from the guest.
+#
+# Returns: A GuestTimezone dictionary.
+#
+# Since: 2.10
+##
+{ 'command': 'guest-get-timezone',
+ 'returns': 'GuestTimezone' }
+
+##
+# @GuestOSInfo:
+#
+# @kernel-release:
+# * POSIX: release field returned by uname(2)
+# * Windows: build number of the OS
+# @kernel-version:
+# * POSIX: version field returned by uname(2)
+# * Windows: version number of the OS
+# @machine:
+# * POSIX: machine field returned by uname(2)
+# * Windows: one of x86, x86_64, arm, ia64
+# @id:
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "mswindows"
+# @name:
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "Microsoft Windows"
+# @pretty-name:
+# * POSIX: as defined by os-release(5)
+# * Windows: product name, e.g. "Microsoft Windows 10 Enterprise"
+# @version:
+# * POSIX: as defined by os-release(5)
+# * Windows: long version string, e.g. "Microsoft Windows Server 2008"
+# @version-id:
+# * POSIX: as defined by os-release(5)
+# * Windows: short version identifier, e.g. "7" or "20012r2"
+# @variant:
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "server" or "client"
+# @variant-id:
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "server" or "client"
+#
+# Notes:
+#
+# On POSIX systems the fields @id, @name, @pretty-name, @version, @version-id,
+# @variant and @variant-id follow the definition specified in os-release(5).
+# Refer to the manual page for exact description of the fields. Their values
+# are taken from the os-release file. If the file is not present in the system,
+# or the values are not present in the file, the fields are not included.
+#
+# On Windows the values are filled from information gathered from the system.
+#
+# Since: 2.10
+##
+{ 'struct': 'GuestOSInfo',
+ 'data': {
+ '*kernel-release': 'str', '*kernel-version': 'str',
+ '*machine': 'str', '*id': 'str', '*name': 'str',
+ '*pretty-name': 'str', '*version': 'str', '*version-id': 'str',
+ '*variant': 'str', '*variant-id': 'str' } }
+
+##
+# @guest-get-osinfo:
+#
+# Retrieve guest operating system information
+#
+# Returns: @GuestOSInfo
+#
+# Since: 2.10
+##
+{ 'command': 'guest-get-osinfo',
+ 'returns': 'GuestOSInfo' }
projects / mirror_qemu.git / blobdiff