frr: add prefix-list support

[pve-network.git] / test / zones / evpn / ebgp_loopback / expected_controller_config

diff --git a/test/zones/evpn/ebgp_loopback/expected_controller_config b/test/zones/evpn/ebgp_loopback/expected_controller_config
index 64dff4eab40e63424e18f3b0a751c3b2129e745f..548d532a02e7788ad793487e830c553580e3c59d 100644 (file)
--- a/test/zones/evpn/ebgp_loopback/expected_controller_config
+++ b/test/zones/evpn/ebgp_loopback/expected_controller_config
@@ -1,11 +1,9 @@
-log syslog informational
-ip forwarding
-ipv6 forwarding
+frr version 8.2.2
 frr defaults datacenter
-service integrated-vtysh-config
 hostname localhost
+log syslog informational
+service integrated-vtysh-config
 !
-ip prefix-list loopbacks_ips seq 10 permit 0.0.0.0/0 le 32
 ip protocol bgp route-map correct_src
 !
 vrf vrf_myzone
@@ -23,7 +21,6 @@ router bgp 65001
  neighbor VTEP update-source dummy1
  neighbor 192.168.0.2 peer-group VTEP
  neighbor 192.168.0.3 peer-group VTEP
- no bgp ebgp-requires-policy
  bgp disable-ebgp-connected-route-check
  neighbor BGP peer-group
  neighbor BGP remote-as external
@@ -38,25 +35,35 @@ router bgp 65001
  exit-address-family
  !
  address-family l2vpn evpn
+  neighbor VTEP route-map MAP_VTEP_IN in
   neighbor VTEP route-map MAP_VTEP_OUT out
   neighbor VTEP activate
   advertise-all-vni
   autort as 65000
  exit-address-family
+exit
 !
 router bgp 65001 vrf vrf_myzone
- no bgp ebgp-requires-policy
+ bgp router-id 192.168.0.1
  !
  address-family l2vpn evpn
   route-target import 65000:1000
   route-target export 65000:1000
  exit-address-family
+exit
+!
+ip prefix-list loopbacks_ips seq 10 permit 0.0.0.0/0 le 32
+!
+route-map MAP_VTEP_IN permit 1
+exit
 !
 route-map MAP_VTEP_OUT permit 1
+exit
 !
 route-map correct_src permit 1
  match ip address prefix-list loopbacks_ips
  set src 192.168.0.1
+exit
 !
 line vty
 !
\ No newline at end of file