# standard filters
#
-# Checks that given_value is in range of correct_value +/- tolerance.
-# Tolerance can be an absolute value or a percentage of the correct value
-# (see examples with tolerances below).
-# Outputs suitable message to stdout if it's not in range.
-#
-# A verbose option, -v, may be used as the LAST argument
-#
-# e.g.
-# foo: 0.0298 = 0.03 +/- 5%
-# _within_tolerance "foo" 0.0298 0.03 5%
-#
-# foo: 0.0298 = 0.03 +/- 0.01
-# _within_tolerance "foo" 0.0298 0.03 0.01
-#
-# foo: 0.0298 = 0.03 -0.01 +0.002
-# _within_tolerance "foo" 0.0298 0.03 0.01 0.002
-#
-# foo: verbose output of 0.0298 = 0.03 +/- 5%
-# _within_tolerance "foo" 0.0298 0.03 5% -v
-_within_tolerance()
-{
- _name=$1
- _given_val=$2
- _correct_val=$3
- _mintol=$4
- _maxtol=$_mintol
- _verbose=0
- _debug=false
-
- # maxtol arg is optional
- # verbose arg is optional
- if [ $# -ge 5 ]
- then
- if [ "$5" = "-v" ]
- then
- _verbose=1
- else
- _maxtol=$5
- fi
- fi
- if [ $# -ge 6 ]
- then
- [ "$6" = "-v" ] && _verbose=1
- fi
-
- # find min with or without %
- _mintolerance=`echo $_mintol | sed -e 's/%//'`
- if [ $_mintol = $_mintolerance ]
- then
- _min=`echo "scale=5; $_correct_val-$_mintolerance" | bc`
- else
- _min=`echo "scale=5; $_correct_val-$_mintolerance*0.01*$_correct_val" | bc`
- fi
-
- # find max with or without %
- _maxtolerance=`echo $_maxtol | sed -e 's/%//'`
- if [ $_maxtol = $_maxtolerance ]
- then
- _max=`echo "scale=5; $_correct_val+$_maxtolerance" | bc`
- else
- _max=`echo "scale=5; $_correct_val+$_maxtolerance*0.01*$_correct_val" | bc`
- fi
-
- $_debug && echo "min = $_min"
- $_debug && echo "max = $_max"
-
- cat <<EOF >$tmp.bc.1
-scale=5;
-if ($_min <= $_given_val) 1;
-if ($_min > $_given_val) 0;
-EOF
-
- cat <<EOF >$tmp.bc.2
-scale=5;
-if ($_given_val <= $_max) 1;
-if ($_given_val > $_max) 0;
-EOF
-
- _above_min=`bc <$tmp.bc.1`
- _below_max=`bc <$tmp.bc.2`
-
- rm -f $tmp.bc.[12]
-
- _in_range=`expr $_above_min \& $_below_max`
-
- # fix up min, max precision for output
- # can vary for 5.3, 6.2
- _min=`echo $_min | sed -e 's/0*$//'` # get rid of trailling zeroes
- _max=`echo $_max | sed -e 's/0*$//'` # get rid of trailling zeroes
-
- if [ $_in_range -eq 1 ]
- then
- [ $_verbose -eq 1 ] && echo $_name is in range
- return 0
- else
- [ $_verbose -eq 1 ] && echo $_name has value of $_given_val
- [ $_verbose -eq 1 ] && echo $_name is NOT in range $_min .. $_max
- return 1
- fi
-}
-
# ctime(3) dates
#
_filter_date()
-e 's/[A-Z][a-z][a-z] [A-z][a-z][a-z] *[0-9][0-9]* [0-9][0-9]:[0-9][0-9]:[0-9][0-9] [0-9][0-9][0-9][0-9]$/DATE/'
}
+_filter_generated_node_ids()
+{
+ sed -re 's/\#block[0-9]{3,}/NODE_NAME/'
+}
+
# replace occurrences of the actual TEST_DIR value with TEST_DIR
_filter_testdir()
{
- sed -e "s#$TEST_DIR#TEST_DIR#g"
+ sed -e "s#$TEST_DIR/#TEST_DIR/#g"
}
# replace occurrences of the actual IMGFMT value with IMGFMT
sed -e "s#$IMGFMT#IMGFMT#g"
}
+# Replace error message when the format is not supported and delete
+# the output lines after the first one
+_filter_qemu_img_check()
+{
+ sed -e '/allocated.*fragmented.*compressed clusters/d' \
+ -e 's/qemu-img: This image format does not support checks/No errors were found on the image./' \
+ -e '/Image end offset: [0-9]\+/d'
+}
+
# Removes \r from messages
_filter_win32()
{
_filter_qemu_io()
{
_filter_win32 | sed -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
- -e "s/: line [0-9][0-9]*: *[0-9][0-9]*\( Aborted\)/:\1/" \
+ -e "s/: line [0-9][0-9]*: *[0-9][0-9]*\( Aborted\| Killed\)/:\1/" \
-e "s/qemu-io> //g"
}
{
sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
-e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
+ -e '/main-loop: WARNING: I\/O thread spun for [0-9]\+ iterations/d' \
-e $'s#\r##' # QEMU monitor uses \r\n line endings
}
{
_filter_win32 | \
sed -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
- -e 's#^{"QMP":.*}$#QMP_VERSION#'
+ -e 's#^{"QMP":.*}$#QMP_VERSION#' \
+ -e '/^ "QMP": {\s*$/, /^ }\s*$/ c\' \
+ -e ' QMP_VERSION'
+}
+
+# replace block job offset
+_filter_block_job_offset()
+{
+ sed -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
}
# replace driver-specific options in the "Formatting..." line
-e "s# encryption=off##g" \
-e "s# cluster_size=[0-9]\\+##g" \
-e "s# table_size=[0-9]\\+##g" \
- -e "s# compat='[^']*'##g" \
+ -e "s# compat=[^ ]*##g" \
-e "s# compat6=\\(on\\|off\\)##g" \
-e "s# static=\\(on\\|off\\)##g" \
-e "s# zeroed_grain=\\(on\\|off\\)##g" \
-e "s# subformat='[^']*'##g" \
-e "s# adapter_type='[^']*'##g" \
+ -e "s# hwversion=[^ ]*##g" \
-e "s# lazy_refcounts=\\(on\\|off\\)##g" \
-e "s# block_size=[0-9]\\+##g" \
-e "s# block_state_zero=\\(on\\|off\\)##g" \
-e "s# log_size=[0-9]\\+##g" \
- -e "s/archipelago:a/TEST_DIR\//g"
+ -e "s# refcount_bits=[0-9]\\+##g" \
+ -e "s# key-secret=[a-zA-Z0-9]\\+##g"
}
_filter_img_info()
sed -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
-e "s#$TEST_DIR#TEST_DIR#g" \
-e "s#$IMGFMT#IMGFMT#g" \
+ -e 's#nbd://127.0.0.1:10810$#TEST_DIR/t.IMGFMT#g' \
-e "/encrypted: yes/d" \
-e "/cluster_size: [0-9]\\+/d" \
-e "/table_size: [0-9]\\+/d" \
-e "/zeroed_grain: \\(on\\|off\\)/d" \
-e "/subformat: '[^']*'/d" \
-e "/adapter_type: '[^']*'/d" \
+ -e "/hwversion: '[^']*'/d" \
-e "/lazy_refcounts: \\(on\\|off\\)/d" \
-e "/block_size: [0-9]\\+/d" \
-e "/block_state_zero: \\(on\\|off\\)/d" \
- -e "/log_size: [0-9]\\+/d" \
- -e "s/archipelago:a/TEST_DIR\//g"
+ -e "/log_size: [0-9]\\+/d"
+}
+
+# filter out offsets and file names from qemu-img map
+_filter_qemu_img_map()
+{
+ sed -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
+ -e 's/Mapped to *//' | _filter_testdir | _filter_imgfmt
+}
+
+_filter_nbd()
+{
+ # nbd.c error messages contain function names and line numbers that are
+ # prone to change. Message ordering depends on timing between send and
+ # receive callbacks sometimes, making them unreliable.
+ #
+ # Filter out the TCP port number since this changes between runs.
+ sed -e '/nbd\/.*\.c:/d' \
+ -e 's#nbd:\(//\)\?127\.0\.0\.1:[0-9]*#nbd:\1127.0.0.1:PORT#g' \
+ -e "s#?socket=$TEST_DIR#?socket=TEST_DIR#g" \
+ -e 's#\(exportname=foo\|PORT\): Failed to .*$#\1#'
}
# make sure this script returns success
-/bin/true
+true