-#!/bin/bash
+#!/usr/bin/env bash
#
# Copyright (C) 2009 Red Hat, Inc.
# Copyright (c) 2000-2001 Silicon Graphics, Inc. All Rights Reserved.
#
_filter_date()
{
- sed \
+ $SED \
-e 's/[A-Z][a-z][a-z] [A-z][a-z][a-z] *[0-9][0-9]* [0-9][0-9]:[0-9][0-9]:[0-9][0-9] [0-9][0-9][0-9][0-9]$/DATE/'
}
_filter_generated_node_ids()
{
- sed -re 's/\#block[0-9]{3,}/NODE_NAME/'
+ $SED -re 's/\#block[0-9]{3,}/NODE_NAME/'
+}
+
+_filter_qom_path()
+{
+ $SED -e 's#\(Attached to: *\) /.*#\1 PATH#'
}
# replace occurrences of the actual TEST_DIR value with TEST_DIR
_filter_testdir()
{
- sed -e "s#$TEST_DIR/#TEST_DIR/#g"
+ $SED -e "s#$TEST_DIR/#TEST_DIR/#g"
}
# replace occurrences of the actual IMGFMT value with IMGFMT
_filter_imgfmt()
{
- sed -e "s#$IMGFMT#IMGFMT#g"
+ $SED -e "s#$IMGFMT#IMGFMT#g"
}
# Replace error message when the format is not supported and delete
# the output lines after the first one
_filter_qemu_img_check()
{
- sed -e '/allocated.*fragmented.*compressed clusters/d' \
+ $SED -e '/allocated.*fragmented.*compressed clusters/d' \
-e 's/qemu-img: This image format does not support checks/No errors were found on the image./' \
-e '/Image end offset: [0-9]\+/d'
}
# Removes \r from messages
_filter_win32()
{
- sed -e 's/\r//g'
+ $SED -e 's/\r//g'
}
# sanitize qemu-io output
_filter_qemu_io()
{
- _filter_win32 | sed -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
+ _filter_win32 | $SED -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
-e "s/: line [0-9][0-9]*: *[0-9][0-9]*\( Aborted\| Killed\)/:\1/" \
-e "s/qemu-io> //g"
}
# replace occurrences of QEMU_PROG with "qemu"
_filter_qemu()
{
- sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
+ $SED -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
-e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
- -e '/main-loop: WARNING: I\/O thread spun for [0-9]\+ iterations/d' \
-e $'s#\r##' # QEMU monitor uses \r\n line endings
}
_filter_qmp()
{
_filter_win32 | \
- sed -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
+ $SED -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
-e 's#^{"QMP":.*}$#QMP_VERSION#' \
-e '/^ "QMP": {\s*$/, /^ }\s*$/ c\' \
-e ' QMP_VERSION'
# readline makes HMP command strings so long that git complains
_filter_hmp()
{
- sed -e $'s/^\\((qemu) \\)\\?.*\e\\[D/\\1/g' \
+ $SED -e $'s/^\\((qemu) \\)\\?.*\e\\[D/\\1/g' \
-e $'s/\e\\[K//g'
}
# replace block job offset
_filter_block_job_offset()
{
- sed -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
+ $SED -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
}
# replace block job len
_filter_block_job_len()
{
- sed -e 's/, "len": [0-9]\+,/, "len": LEN,/g'
+ $SED -e 's/, "len": [0-9]\+,/, "len": LEN,/g'
}
# replace actual image size (depends on the host filesystem)
_filter_actual_image_size()
{
- sed -s 's/\("actual-size":\s*\)[0-9]\+/\1SIZE/g'
+ $SED -s 's/\("actual-size":\s*\)[0-9]\+/\1SIZE/g'
}
# replace driver-specific options in the "Formatting..." line
_filter_img_create()
{
- sed -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
+ $SED -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
+ -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
-e "s#$TEST_DIR#TEST_DIR#g" \
-e "s#$IMGFMT#IMGFMT#g" \
-e 's#nbd:127.0.0.1:10810#TEST_DIR/t.IMGFMT#g' \
-e "s# log_size=[0-9]\\+##g" \
-e "s# refcount_bits=[0-9]\\+##g" \
-e "s# key-secret=[a-zA-Z0-9]\\+##g" \
- -e "s# iter-time=[0-9]\\+##g"
+ -e "s# iter-time=[0-9]\\+##g" \
+ -e "s# force_size=\\(on\\|off\\)##g"
}
_filter_img_info()
{
- sed -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
+ if [[ "$1" == "--format-specific" ]]; then
+ local format_specific=1
+ shift
+ else
+ local format_specific=0
+ fi
+
+ discard=0
+ regex_json_spec_start='^ *"format-specific": \{'
+ $SED -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
+ -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
-e "s#$TEST_DIR#TEST_DIR#g" \
-e "s#$IMGFMT#IMGFMT#g" \
-e 's#nbd://127.0.0.1:10810$#TEST_DIR/t.IMGFMT#g' \
-e "/table_size: [0-9]\\+/d" \
-e "/compat: '[^']*'/d" \
-e "/compat6: \\(on\\|off\\)/d" \
+ -e "s/cid: [0-9]\+/cid: XXXXXXXXXX/" \
-e "/static: \\(on\\|off\\)/d" \
-e "/zeroed_grain: \\(on\\|off\\)/d" \
-e "/subformat: '[^']*'/d" \
-e "/block_state_zero: \\(on\\|off\\)/d" \
-e "/log_size: [0-9]\\+/d" \
-e "s/iters: [0-9]\\+/iters: 1024/" \
- -e "s/uuid: [-a-f0-9]\\+/uuid: 00000000-0000-0000-0000-000000000000/"
+ -e "s/uuid: [-a-f0-9]\\+/uuid: 00000000-0000-0000-0000-000000000000/" | \
+ while IFS='' read -r line; do
+ if [[ $format_specific == 1 ]]; then
+ discard=0
+ elif [[ $line == "Format specific information:" ]]; then
+ discard=1
+ elif [[ $line =~ $regex_json_spec_start ]]; then
+ discard=2
+ regex_json_spec_end="^${line%%[^ ]*}\\},? *$"
+ fi
+ if [[ $discard == 0 ]]; then
+ echo "$line"
+ elif [[ $discard == 1 && ! $line ]]; then
+ echo
+ discard=0
+ elif [[ $discard == 2 && $line =~ $regex_json_spec_end ]]; then
+ discard=0
+ fi
+ done
}
# filter out offsets and file names from qemu-img map; good for both
# human and json output
_filter_qemu_img_map()
{
- sed -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
+ $SED -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
-e 's/"offset": [0-9]\+/"offset": OFFSET/g' \
-e 's/Mapped to *//' | _filter_testdir | _filter_imgfmt
}
# receive callbacks sometimes, making them unreliable.
#
# Filter out the TCP port number since this changes between runs.
- sed -e '/nbd\/.*\.c:/d' \
+ $SED -e '/nbd\/.*\.c:/d' \
-e 's#127\.0\.0\.1:[0-9]*#127.0.0.1:PORT#g' \
-e "s#?socket=$TEST_DIR#?socket=TEST_DIR#g" \
-e 's#\(foo\|PORT/\?\|.sock\): Failed to .*$#\1#'
projects / mirror_qemu.git / blobdiff