#include "qemu/osdep.h"
-#include "libqtest.h"
+#include "libqtest-single.h"
#include "qemu/timer.h"
#include "hw/timer/mc146818rtc_regs.h"
+#define UIP_HOLD_LENGTH (8 * NANOSECONDS_PER_SECOND / 32768)
+
static uint8_t base = 0x70;
static int bcd2dec(int value)
t = (long)mktime(datep);
s = (long)mktime(&start);
if (t < s) {
- g_test_message("RTC is %ld second(s) behind wall-clock\n", (s - t));
+ g_test_message("RTC is %ld second(s) behind wall-clock", (s - t));
} else {
- g_test_message("RTC is %ld second(s) ahead of wall-clock\n", (t - s));
+ g_test_message("RTC is %ld second(s) ahead of wall-clock", (t - s));
}
g_assert_cmpint(ABS(t - s), <=, wiggle);
g_assert(cmos_read(RTC_REG_C) == 0);
}
+static void set_time_regs(int h, int m, int s)
+{
+ cmos_write(RTC_HOURS, h);
+ cmos_write(RTC_MINUTES, m);
+ cmos_write(RTC_SECONDS, s);
+}
+
static void set_time(int mode, int h, int m, int s)
{
- /* set BCD 12 hour mode */
cmos_write(RTC_REG_B, mode);
-
cmos_write(RTC_REG_A, 0x76);
+ set_time_regs(h, m, s);
+ cmos_write(RTC_REG_A, 0x26);
+}
+
+static void set_datetime_bcd(int h, int min, int s, int d, int m, int y)
+{
cmos_write(RTC_HOURS, h);
- cmos_write(RTC_MINUTES, m);
+ cmos_write(RTC_MINUTES, min);
+ cmos_write(RTC_SECONDS, s);
+ cmos_write(RTC_YEAR, y & 0xFF);
+ cmos_write(RTC_CENTURY, y >> 8);
+ cmos_write(RTC_MONTH, m);
+ cmos_write(RTC_DAY_OF_MONTH, d);
+}
+
+static void set_datetime_dec(int h, int min, int s, int d, int m, int y)
+{
+ cmos_write(RTC_HOURS, h);
+ cmos_write(RTC_MINUTES, min);
cmos_write(RTC_SECONDS, s);
+ cmos_write(RTC_YEAR, y % 100);
+ cmos_write(RTC_CENTURY, y / 100);
+ cmos_write(RTC_MONTH, m);
+ cmos_write(RTC_DAY_OF_MONTH, d);
+}
+
+static void set_datetime(int mode, int h, int min, int s, int d, int m, int y)
+{
+ cmos_write(RTC_REG_B, mode);
+
+ cmos_write(RTC_REG_A, 0x76);
+ if (mode & REG_B_DM) {
+ set_datetime_dec(h, min, s, d, m, y);
+ } else {
+ set_datetime_bcd(h, min, s, d, m, y);
+ }
cmos_write(RTC_REG_A, 0x26);
}
g_assert_cmpint(cmos_read(RTC_SECONDS), ==, s); \
} while(0)
+#define assert_datetime_bcd(h, min, s, d, m, y) \
+ do { \
+ g_assert_cmpint(cmos_read(RTC_HOURS), ==, h); \
+ g_assert_cmpint(cmos_read(RTC_MINUTES), ==, min); \
+ g_assert_cmpint(cmos_read(RTC_SECONDS), ==, s); \
+ g_assert_cmpint(cmos_read(RTC_DAY_OF_MONTH), ==, d); \
+ g_assert_cmpint(cmos_read(RTC_MONTH), ==, m); \
+ g_assert_cmpint(cmos_read(RTC_YEAR), ==, (y & 0xFF)); \
+ g_assert_cmpint(cmos_read(RTC_CENTURY), ==, (y >> 8)); \
+ } while(0)
+
static void basic_12h_bcd(void)
{
/* set BCD 12 hour mode */
static void register_b_set_flag(void)
{
+ if (cmos_read(RTC_REG_A) & REG_A_UIP) {
+ clock_step(UIP_HOLD_LENGTH + NANOSECONDS_PER_SECOND / 5);
+ }
+ g_assert_cmpint(cmos_read(RTC_REG_A) & REG_A_UIP, ==, 0);
+
/* Enable binary-coded decimal (BCD) mode and SET flag in Register B*/
cmos_write(RTC_REG_B, REG_B_24H | REG_B_SET);
- cmos_write(RTC_REG_A, 0x76);
- cmos_write(RTC_YEAR, 0x11);
- cmos_write(RTC_CENTURY, 0x20);
- cmos_write(RTC_MONTH, 0x02);
- cmos_write(RTC_DAY_OF_MONTH, 0x02);
- cmos_write(RTC_HOURS, 0x02);
- cmos_write(RTC_MINUTES, 0x04);
- cmos_write(RTC_SECONDS, 0x58);
- cmos_write(RTC_REG_A, 0x26);
+ set_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
- /* Since SET flag is still enabled, these are equality checks. */
- g_assert_cmpint(cmos_read(RTC_HOURS), ==, 0x02);
- g_assert_cmpint(cmos_read(RTC_MINUTES), ==, 0x04);
- g_assert_cmpint(cmos_read(RTC_SECONDS), ==, 0x58);
- g_assert_cmpint(cmos_read(RTC_DAY_OF_MONTH), ==, 0x02);
- g_assert_cmpint(cmos_read(RTC_MONTH), ==, 0x02);
- g_assert_cmpint(cmos_read(RTC_YEAR), ==, 0x11);
- g_assert_cmpint(cmos_read(RTC_CENTURY), ==, 0x20);
+ assert_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
+
+ /* Since SET flag is still enabled, time does not advance. */
+ clock_step(1000000000LL);
+ assert_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
/* Disable SET flag in Register B */
cmos_write(RTC_REG_B, cmos_read(RTC_REG_B) & ~REG_B_SET);
- g_assert_cmpint(cmos_read(RTC_HOURS), ==, 0x02);
- g_assert_cmpint(cmos_read(RTC_MINUTES), ==, 0x04);
+ assert_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
- /* Since SET flag is disabled, this is an inequality check.
- * We (reasonably) assume that no (sexagesimal) overflow occurs. */
- g_assert_cmpint(cmos_read(RTC_SECONDS), >=, 0x58);
- g_assert_cmpint(cmos_read(RTC_DAY_OF_MONTH), ==, 0x02);
- g_assert_cmpint(cmos_read(RTC_MONTH), ==, 0x02);
- g_assert_cmpint(cmos_read(RTC_YEAR), ==, 0x11);
- g_assert_cmpint(cmos_read(RTC_CENTURY), ==, 0x20);
+ /* Since SET flag is disabled, the clock now advances. */
+ clock_step(1000000000LL);
+ assert_datetime_bcd(0x02, 0x04, 0x59, 0x02, 0x02, 0x2011);
+}
+
+static void divider_reset(void)
+{
+ /* Enable binary-coded decimal (BCD) mode in Register B*/
+ cmos_write(RTC_REG_B, REG_B_24H);
+
+ /* Enter divider reset */
+ cmos_write(RTC_REG_A, 0x76);
+ set_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
+
+ assert_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
+
+ /* Since divider reset flag is still enabled, these are equality checks. */
+ clock_step(1000000000LL);
+ assert_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
+
+ /* The first update ends 500 ms after divider reset */
+ cmos_write(RTC_REG_A, 0x26);
+ clock_step(500000000LL - UIP_HOLD_LENGTH - 1);
+ g_assert_cmpint(cmos_read(RTC_REG_A) & REG_A_UIP, ==, 0);
+ assert_datetime_bcd(0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
+
+ clock_step(1);
+ g_assert_cmpint(cmos_read(RTC_REG_A) & REG_A_UIP, !=, 0);
+ clock_step(UIP_HOLD_LENGTH);
+ g_assert_cmpint(cmos_read(RTC_REG_A) & REG_A_UIP, ==, 0);
+
+ assert_datetime_bcd(0x02, 0x04, 0x59, 0x02, 0x02, 0x2011);
+}
+
+static void uip_stuck(void)
+{
+ set_datetime(REG_B_24H, 0x02, 0x04, 0x58, 0x02, 0x02, 0x2011);
+
+ /* The first update ends 500 ms after divider reset */
+ (void)cmos_read(RTC_REG_C);
+ clock_step(500000000LL);
+ g_assert_cmpint(cmos_read(RTC_REG_A) & REG_A_UIP, ==, 0);
+ assert_datetime_bcd(0x02, 0x04, 0x59, 0x02, 0x02, 0x2011);
+
+ /* UF is now set. */
+ cmos_write(RTC_HOURS_ALARM, 0x02);
+ cmos_write(RTC_MINUTES_ALARM, 0xC0);
+ cmos_write(RTC_SECONDS_ALARM, 0xC0);
+
+ /* Because the alarm will fire soon, reading register A will latch UIP. */
+ clock_step(1000000000LL - UIP_HOLD_LENGTH / 2);
+ g_assert_cmpint(cmos_read(RTC_REG_A) & REG_A_UIP, !=, 0);
+
+ /* Move the alarm far away. This must not cause UIP to remain stuck! */
+ cmos_write(RTC_HOURS_ALARM, 0x03);
+ clock_step(UIP_HOLD_LENGTH);
+ g_assert_cmpint(cmos_read(RTC_REG_A) & REG_A_UIP, ==, 0);
}
#define RTC_PERIOD_CODE1 13 /* 8 Hz */
qtest_add_func("/rtc/basic/bcd-12h", basic_12h_bcd);
qtest_add_func("/rtc/set-year/20xx", set_year_20xx);
qtest_add_func("/rtc/set-year/1980", set_year_1980);
- qtest_add_func("/rtc/misc/register_b_set_flag", register_b_set_flag);
+ qtest_add_func("/rtc/update/register_b_set_flag", register_b_set_flag);
+ qtest_add_func("/rtc/update/divider-reset", divider_reset);
+ qtest_add_func("/rtc/update/uip-stuck", uip_stuck);
qtest_add_func("/rtc/misc/fuzz-registers", fuzz_registers);
qtest_add_func("/rtc/periodic/interrupt", periodic_timer);
projects / mirror_qemu.git / blobdiff