fatal_error = ""
-# Expected version of CLI Output - Appendix to filename
-# empty string = current, latest output (default)
-# "-1" ... "-NNN" previous versions (incrementing with each version)
-cli_version = ""
-
-
#####################################################
##
## Network Topology Definition
def test_router_running():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
fatal_error = net['r%s' % i].checkRouterRunning()
assert fatal_error == "", fatal_error
- # Detect CLI Version
- # At this time, there are only 2 possible outputs, so simple check
- output = net['r1'].cmd('vtysh -c "show mpls ldp discovery" 2> /dev/null').rstrip()
-
- # Check if old or new format of CLI Output. Default is to current format
- #
- # Old (v1) output looks like this:
- # Local LDP Identifier: 1.1.1.1:0
- # Discovery Sources:
- # Interfaces:
- # r1-eth0: xmit/recv
- # LDP Id: 2.2.2.2:0, Transport address: 2.2.2.2
- # Hold time: 15 sec
- # Targeted Hellos:
- #
- # Current (v0) output looks like this:
- # AF ID Type Source Holdtime
- # ipv4 2.2.2.2 Link r1-eth0 15
- pattern = re.compile("^Local LDP Identifier.*")
- if pattern.match(output):
- cli_version = "-1"
-
# For debugging after starting FRR/Quagga daemons, uncomment the next line
# CLI(net)
def test_mpls_interfaces():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
print("******************************************\n")
failures = 0
for i in range(1, 5):
- refTableFile = '%s/r%s/show_mpls_ldp_interface.ref%s' % (thisDir, i, cli_version)
+ refTableFile = '%s/r%s/show_mpls_ldp_interface.ref'
if os.path.isfile(refTableFile):
# Read expected result from file
expected = open(refTableFile).read().rstrip()
def test_mpls_ldp_neighbor_establish():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
# Look for any node not yet converged
for i in range(1, 5):
established = net['r%s' % i].cmd('vtysh -c "show mpls ldp neighbor" 2> /dev/null').rstrip()
- if cli_version != "-1":
- # On current version, we need to make sure they all turn to OPERATIONAL on all lines
- #
- lines = ('\n'.join(established.splitlines()) + '\n').splitlines(1)
- # Check all lines to be either table header (starting with ^AF or show OPERATIONAL)
- header = r'^AF.*'
- operational = r'^ip.*OPERATIONAL.*'
- found_operational = 0
- for j in range(1, len(lines)):
- if (not re.search(header, lines[j])) and (not re.search(operational, lines[j])):
- established = "" # Empty string shows NOT established
- if re.search(operational, lines[j]):
- found_operational += 1
- if found_operational < 1:
- # Need at least one operational neighbor
+
+ # On current version, we need to make sure they all turn to OPERATIONAL on all lines
+ #
+ lines = ('\n'.join(established.splitlines()) + '\n').splitlines(1)
+ # Check all lines to be either table header (starting with ^AF or show OPERATIONAL)
+ header = r'^AF.*'
+ operational = r'^ip.*OPERATIONAL.*'
+ found_operational = 0
+ for j in range(1, len(lines)):
+ if (not re.search(header, lines[j])) and (not re.search(operational, lines[j])):
established = "" # Empty string shows NOT established
+ if re.search(operational, lines[j]):
+ found_operational += 1
+ if found_operational < 1:
+ # Need at least one operational neighbor
+ established = "" # Empty string shows NOT established
if not established:
print('Waiting for r%s' %i)
sys.stdout.flush()
def test_mpls_ldp_discovery():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
print("******************************************\n")
failures = 0
for i in range(1, 5):
- refTableFile = '%s/r%s/show_mpls_ldp_discovery.ref%s' % (thisDir, i, cli_version)
+ refTableFile = '%s/r%s/show_mpls_ldp_discovery.ref'
if os.path.isfile(refTableFile):
# Actual output from router
actual = net['r%s' % i].cmd('vtysh -c "show mpls ldp discovery" 2> /dev/null').rstrip()
def test_mpls_ldp_neighbor():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
print("******************************************\n")
failures = 0
for i in range(1, 5):
- refTableFile = '%s/r%s/show_mpls_ldp_neighbor.ref%s' % (thisDir, i, cli_version)
+ refTableFile = '%s/r%s/show_mpls_ldp_neighbor.ref'
if os.path.isfile(refTableFile):
# Read expected result from file
expected = open(refTableFile).read().rstrip()
actual = net['r%s' % i].cmd('vtysh -c "show mpls ldp neighbor" 2> /dev/null').rstrip()
# Mask out changing parts in output
- if cli_version == "-1":
- # Mask out Timer in Uptime
- actual = re.sub(r"Up time: [0-9][0-9]:[0-9][0-9]:[0-9][0-9]", "Up time: xx:xx:xx", actual)
- # Mask out Port numbers in TCP connection
- actual = re.sub(r"TCP connection: ([0-9]+\.[0-9]+\.[0-9]+\.[0-9]):[0-9]+ - ([0-9]+\.[0-9]+\.[0-9]+\.[0-9]):[0-9]+",
- r"TCP connection: \1:xxx - \2:xxx", actual)
- else:
- # Current Version
- #
- # Mask out Timer in Uptime
- actual = re.sub(r"(ipv4 [0-9\.]+ +OPERATIONAL [0-9\.]+ +)[0-9][0-9]:[0-9][0-9]:[0-9][0-9]", r"\1xx:xx:xx", actual)
+ # Mask out Timer in Uptime
+ actual = re.sub(r"(ipv4 [0-9\.]+ +OPERATIONAL [0-9\.]+ +)[0-9][0-9]:[0-9][0-9]:[0-9][0-9]", r"\1xx:xx:xx", actual)
# Fix newlines (make them all the same)
actual = ('\n'.join(actual.splitlines()) + '\n').splitlines(1)
def test_mpls_ldp_binding():
global fatal_error
global net
- global cli_version
# Skip this test for now until proper sorting of the output
# is implemented
print("******************************************\n")
failures = 0
for i in range(1, 5):
- refTableFile = '%s/r%s/show_mpls_ldp_binding.ref%s' % (thisDir, i, cli_version)
+ refTableFile = '%s/r%s/show_mpls_ldp_binding.ref'
if os.path.isfile(refTableFile):
# Read expected result from file
expected = open(refTableFile).read().rstrip()
actual = net['r%s' % i].cmd('vtysh -c "show mpls ldp binding" 2> /dev/null').rstrip()
# Mask out changing parts in output
- if cli_version == "-1":
- # Mask out label
- actual = re.sub(r"label: [0-9]+", "label: xxx", actual)
- actual = re.sub(r"(\s+[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+[ ]+)[0-9]+", r"\1xxx", actual)
- else:
- # Current Version
- #
- # Mask out label
- actual = re.sub(r"(ipv4 [0-9\./]+ +[0-9\.]+ +)[0-9][0-9] (.*)", r"\1xxx\2", actual)
- actual = re.sub(r"(ipv4 [0-9\./]+ +[0-9\.]+ +[a-z\-]+ +)[0-9][0-9] (.*)", r"\1xxx\2", actual)
+ # Mask out label
+ actual = re.sub(r"(ipv4 [0-9\./]+ +[0-9\.]+ +)[0-9][0-9] (.*)", r"\1xxx\2", actual)
+ actual = re.sub(r"(ipv4 [0-9\./]+ +[0-9\.]+ +[a-z\-]+ +)[0-9][0-9] (.*)", r"\1xxx\2", actual)
# Fix newlines (make them all the same)
actual = ('\n'.join(actual.splitlines()) + '\n').splitlines(1)
def test_zebra_ipv4_routingTable():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
print("******************************************\n")
failures = 0
for i in range(1, 5):
- refTableFile = '%s/r%s/show_ipv4_route.ref%s' % (thisDir, i, cli_version)
+ refTableFile = '%s/r%s/show_ipv4_route.ref'
if os.path.isfile(refTableFile):
# Read expected result from file
expected = open(refTableFile).read().rstrip()
# now fix newlines of expected (make them all the same)
expected = ('\n'.join(expected.splitlines()) + '\n').splitlines(1)
- # Add missing comma before label (for old version)
- actual = re.sub(r"([0-9]) label ", r"\1, label ", actual)
-
# Fix newlines (make them all the same)
actual = ('\n'.join(actual.splitlines()) + '\n').splitlines(1)
def test_mpls_table():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
print("******************************************\n")
failures = 0
- version = cli_version
- if (version == ""):
- # check for new output without implicit-null
- output = net['r1'].cmd('vtysh -c "show mpls table" 2> /dev/null').rstrip()
- if 'LDP 10.0.1.2 3' in output:
- version = "-no-impl-null"
-
for i in range(1, 5):
- refTableFile = '%s/r%s/show_mpls_table.ref%s' % (thisDir, i, version)
+ refTableFile = '%s/r%s/show_mpls_table.ref'
if os.path.isfile(refTableFile):
# Read expected result from file
- expected = open(refTableFile).read().rstrip()
+ expected = open(refTableFile).read()
# Fix newlines (make them all the same)
expected = ('\n'.join(expected.splitlines()) + '\n').splitlines(1)
# Actual output from router
- actual = net['r%s' % i].cmd('vtysh -c "show mpls table" 2> /dev/null').rstrip()
+ actual = net['r%s' % i].cmd('vtysh -c "show mpls table" 2> /dev/null')
# Fix inconsistent Label numbers at beginning of line
actual = re.sub(r"(\s+)[0-9]+(\s+LDP)", r"\1XX\2", actual)
def test_linux_mpls_routes():
global fatal_error
global net
- global cli_version
# Skip if previous fatal error condition is raised
if (fatal_error != ""):
projects / mirror_frr.git / blobdiff