* QTest testcase for VirtIO SCSI
*
* Copyright (c) 2014 SUSE LINUX Products GmbH
+ * Copyright (c) 2015 Red Hat Inc.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
-#include <glib.h>
-#include <string.h>
-#include "libqtest.h"
#include "qemu/osdep.h"
+#include "libqtest.h"
+#include "block/scsi.h"
+#include "libqos/libqos-pc.h"
+#include "libqos/libqos-spapr.h"
+#include "libqos/virtio.h"
+#include "libqos/virtio-pci.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_pci.h"
+#include "standard-headers/linux/virtio_scsi.h"
+
+#define PCI_SLOT 0x02
+#define PCI_FN 0x00
+#define QVIRTIO_SCSI_TIMEOUT_US (1 * 1000 * 1000)
+
+#define MAX_NUM_QUEUES 64
+
+typedef struct {
+ QVirtioDevice *dev;
+ QOSState *qs;
+ int num_queues;
+ QVirtQueue *vq[MAX_NUM_QUEUES + 2];
+} QVirtIOSCSI;
+
+static QOSState *qvirtio_scsi_start(const char *extra_opts)
+{
+ const char *arch = qtest_get_arch();
+ const char *cmd = "-drive id=drv0,if=none,file=/dev/null,format=raw "
+ "-device virtio-scsi-pci,id=vs0 "
+ "-device scsi-hd,bus=vs0.0,drive=drv0 %s";
+
+ if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+ return qtest_pc_boot(cmd, extra_opts ? : "");
+ }
+ if (strcmp(arch, "ppc64") == 0) {
+ return qtest_spapr_boot(cmd, extra_opts ? : "");
+ }
+
+ g_printerr("virtio-scsi tests are only available on x86 or ppc64\n");
+ exit(EXIT_FAILURE);
+}
+
+static void qvirtio_scsi_stop(QOSState *qs)
+{
+ qtest_shutdown(qs);
+}
+
+static void qvirtio_scsi_pci_free(QVirtIOSCSI *vs)
+{
+ int i;
+
+ for (i = 0; i < vs->num_queues + 2; i++) {
+ qvirtqueue_cleanup(vs->dev->bus, vs->vq[i], vs->qs->alloc);
+ }
+ qvirtio_pci_device_disable(container_of(vs->dev, QVirtioPCIDevice, vdev));
+ qvirtio_pci_device_free((QVirtioPCIDevice *)vs->dev);
+ qvirtio_scsi_stop(vs->qs);
+ g_free(vs);
+}
+
+static uint64_t qvirtio_scsi_alloc(QVirtIOSCSI *vs, size_t alloc_size,
+ const void *data)
+{
+ uint64_t addr;
+
+ addr = guest_alloc(vs->qs->alloc, alloc_size);
+ if (data) {
+ memwrite(addr, data, alloc_size);
+ }
+
+ return addr;
+}
+
+static uint8_t virtio_scsi_do_command(QVirtIOSCSI *vs, const uint8_t *cdb,
+ const uint8_t *data_in,
+ size_t data_in_len,
+ uint8_t *data_out, size_t data_out_len,
+ struct virtio_scsi_cmd_resp *resp_out)
+{
+ QVirtQueue *vq;
+ struct virtio_scsi_cmd_req req = { { 0 } };
+ struct virtio_scsi_cmd_resp resp = { .response = 0xff, .status = 0xff };
+ uint64_t req_addr, resp_addr, data_in_addr = 0, data_out_addr = 0;
+ uint8_t response;
+ uint32_t free_head;
+
+ vq = vs->vq[2];
+
+ req.lun[0] = 1; /* Select LUN */
+ req.lun[1] = 1; /* Select target 1 */
+ memcpy(req.cdb, cdb, VIRTIO_SCSI_CDB_SIZE);
+
+ /* XXX: Fix endian if any multi-byte field in req/resp is used */
+
+ /* Add request header */
+ req_addr = qvirtio_scsi_alloc(vs, sizeof(req), &req);
+ free_head = qvirtqueue_add(vq, req_addr, sizeof(req), false, true);
+
+ if (data_out_len) {
+ data_out_addr = qvirtio_scsi_alloc(vs, data_out_len, data_out);
+ qvirtqueue_add(vq, data_out_addr, data_out_len, false, true);
+ }
+
+ /* Add response header */
+ resp_addr = qvirtio_scsi_alloc(vs, sizeof(resp), &resp);
+ qvirtqueue_add(vq, resp_addr, sizeof(resp), true, !!data_in_len);
+
+ if (data_in_len) {
+ data_in_addr = qvirtio_scsi_alloc(vs, data_in_len, data_in);
+ qvirtqueue_add(vq, data_in_addr, data_in_len, true, false);
+ }
+
+ qvirtqueue_kick(vs->dev, vq, free_head);
+ qvirtio_wait_queue_isr(vs->dev, vq, QVIRTIO_SCSI_TIMEOUT_US);
+
+ response = readb(resp_addr +
+ offsetof(struct virtio_scsi_cmd_resp, response));
+
+ if (resp_out) {
+ memread(resp_addr, resp_out, sizeof(*resp_out));
+ }
+
+ guest_free(vs->qs->alloc, req_addr);
+ guest_free(vs->qs->alloc, resp_addr);
+ guest_free(vs->qs->alloc, data_in_addr);
+ guest_free(vs->qs->alloc, data_out_addr);
+ return response;
+}
+
+static QVirtIOSCSI *qvirtio_scsi_pci_init(int slot)
+{
+ const uint8_t test_unit_ready_cdb[VIRTIO_SCSI_CDB_SIZE] = {};
+ QVirtIOSCSI *vs;
+ QVirtioPCIDevice *dev;
+ struct virtio_scsi_cmd_resp resp;
+ int i;
+
+ vs = g_new0(QVirtIOSCSI, 1);
+
+ vs->qs = qvirtio_scsi_start("-drive file=blkdebug::null-co://,"
+ "if=none,id=dr1,format=raw,file.align=4k "
+ "-device scsi-disk,drive=dr1,lun=0,scsi-id=1");
+ dev = qvirtio_pci_device_find(vs->qs->pcibus, VIRTIO_ID_SCSI);
+ vs->dev = (QVirtioDevice *)dev;
+ g_assert(dev != NULL);
+ g_assert_cmphex(vs->dev->device_type, ==, VIRTIO_ID_SCSI);
+
+ qvirtio_pci_device_enable(dev);
+ qvirtio_reset(vs->dev);
+ qvirtio_set_acknowledge(vs->dev);
+ qvirtio_set_driver(vs->dev);
+
+ vs->num_queues = qvirtio_config_readl(vs->dev, 0);
+
+ g_assert_cmpint(vs->num_queues, <, MAX_NUM_QUEUES);
+
+ for (i = 0; i < vs->num_queues + 2; i++) {
+ vs->vq[i] = qvirtqueue_setup(vs->dev, vs->qs->alloc, i);
+ }
+
+ /* Clear the POWER ON OCCURRED unit attention */
+ g_assert_cmpint(virtio_scsi_do_command(vs, test_unit_ready_cdb,
+ NULL, 0, NULL, 0, &resp),
+ ==, 0);
+ g_assert_cmpint(resp.status, ==, CHECK_CONDITION);
+ g_assert_cmpint(resp.sense[0], ==, 0x70); /* Fixed format sense buffer */
+ g_assert_cmpint(resp.sense[2], ==, UNIT_ATTENTION);
+ g_assert_cmpint(resp.sense[12], ==, 0x29); /* POWER ON */
+ g_assert_cmpint(resp.sense[13], ==, 0x00);
+
+ return vs;
+}
/* Tests only initialization so far. TODO: Replace with functional tests */
static void pci_nop(void)
{
+ QOSState *qs;
+
+ qs = qvirtio_scsi_start(NULL);
+ qvirtio_scsi_stop(qs);
}
-int main(int argc, char **argv)
+static void hotplug(void)
{
- int ret;
+ QDict *response;
+ QOSState *qs;
- g_test_init(&argc, &argv, NULL);
- qtest_add_func("/virtio/scsi/pci/nop", pci_nop);
+ qs = qvirtio_scsi_start("-drive id=drv1,if=none,file=/dev/null,format=raw");
+ response = qmp("{\"execute\": \"device_add\","
+ " \"arguments\": {"
+ " \"driver\": \"scsi-hd\","
+ " \"id\": \"scsi-hd\","
+ " \"drive\": \"drv1\""
+ "}}");
+
+ g_assert(response);
+ g_assert(!qdict_haskey(response, "error"));
+ QDECREF(response);
+
+ response = qmp("{\"execute\": \"device_del\","
+ " \"arguments\": {"
+ " \"id\": \"scsi-hd\""
+ "}}");
+
+ g_assert(response);
+ g_assert(!qdict_haskey(response, "error"));
+ g_assert(qdict_haskey(response, "event"));
+ g_assert(!strcmp(qdict_get_str(response, "event"), "DEVICE_DELETED"));
+ QDECREF(response);
+ qvirtio_scsi_stop(qs);
+}
+
+/* Test WRITE SAME with the lba not aligned */
+static void test_unaligned_write_same(void)
+{
+ QVirtIOSCSI *vs;
+ uint8_t buf1[512] = { 0 };
+ uint8_t buf2[512] = { 1 };
+ const uint8_t write_same_cdb_1[VIRTIO_SCSI_CDB_SIZE] = {
+ 0x41, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x02, 0x00
+ };
+ const uint8_t write_same_cdb_2[VIRTIO_SCSI_CDB_SIZE] = {
+ 0x41, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x33, 0x00, 0x00
+ };
- qtest_start("-drive id=drv0,if=none,file=/dev/null "
- "-device virtio-scsi-pci,id=vscsi0 "
- "-device scsi-hd,bus=vscsi0.0,drive=drv0");
- ret = g_test_run();
+ vs = qvirtio_scsi_pci_init(PCI_SLOT);
- qtest_end();
+ g_assert_cmphex(0, ==,
+ virtio_scsi_do_command(vs, write_same_cdb_1, NULL, 0, buf1, 512, NULL));
+
+ g_assert_cmphex(0, ==,
+ virtio_scsi_do_command(vs, write_same_cdb_2, NULL, 0, buf2, 512, NULL));
+
+ qvirtio_scsi_pci_free(vs);
+}
+
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+ qtest_add_func("/virtio/scsi/pci/nop", pci_nop);
+ qtest_add_func("/virtio/scsi/pci/hotplug", hotplug);
+ qtest_add_func("/virtio/scsi/pci/scsi-disk/unaligned-write-same",
+ test_unaligned_write_same);
- return ret;
+ return g_test_run();
}
projects / mirror_qemu.git / blobdiff