#
# The <format-string> should be a sprintf()-compatible format string.
-# thread-pool.c
-thread_pool_submit(void *pool, void *req, void *opaque) "pool %p req %p opaque %p"
-thread_pool_complete(void *pool, void *req, void *opaque, int ret) "pool %p req %p opaque %p ret %d"
-thread_pool_cancel(void *req, void *opaque) "req %p opaque %p"
-
# ioport.c
cpu_in(unsigned int addr, char size, unsigned int val) "addr %#x(%c) value %u"
cpu_out(unsigned int addr, char size, unsigned int val) "addr %#x(%c) value %u"
# balloon.c
# Since requests are raised via monitor, not many tracepoints are needed.
balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu"
-virtio_balloon_handle_output(const char *name, uint64_t gpa) "section name: %s gpa: %"PRIx64
-virtio_balloon_get_config(uint32_t num_pages, uint32_t actual) "num_pages: %d actual: %d"
-virtio_balloon_set_config(uint32_t actual, uint32_t oldactual) "actual: %d oldactual: %d"
-virtio_balloon_to_target(uint64_t target, uint32_t num_pages) "balloon target: %"PRIx64" num_pages: %d"
# vl.c
vm_state_notify(int running, int reason) "running %d reason %d"
qemu_system_powerdown_request(void) ""
# spice-qemu-char.c
-spice_vmc_write(ssize_t out, int len) "spice wrottn %zd of requested %d"
+spice_vmc_write(ssize_t out, int len) "spice wrote %zd of requested %d"
spice_vmc_read(int bytes, int len) "spice read %d of requested %d"
spice_vmc_register_interface(void *scd) "spice vmc registered interface %p"
spice_vmc_unregister_interface(void *scd) "spice vmc unregistered interface %p"
# xen-hvm.c
xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx"
xen_client_set_memory(uint64_t start_addr, unsigned long size, bool log_dirty) "%#"PRIx64" size %#lx, log_dirty %i"
-xen_ioreq_server_create(uint32_t id) "id: %u"
-xen_ioreq_server_destroy(uint32_t id) "id: %u"
-xen_ioreq_server_state(uint32_t id, bool enable) "id: %u: enable: %i"
-xen_map_mmio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64
-xen_unmap_mmio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64
-xen_map_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64
-xen_unmap_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64
-xen_map_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x"
-xen_unmap_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x"
handle_ioreq(void *req, uint32_t type, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p type=%d dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
handle_ioreq_read(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p read type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
handle_ioreq_write(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p write type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
xen_remap_bucket(uint64_t index) "index %#"PRIx64
xen_map_cache_return(void* ptr) "%p"
-# qemu-coroutine.c
-qemu_coroutine_enter(void *from, void *to, void *opaque) "from %p to %p opaque %p"
-qemu_coroutine_yield(void *from, void *to) "from %p to %p"
-qemu_coroutine_terminate(void *co) "self %p"
-
-# qemu-coroutine-lock.c
-qemu_co_queue_run_restart(void *co) "co %p"
-qemu_co_queue_next(void *nxt) "next %p"
-qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p"
-qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p"
-qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p"
-qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
-
# monitor.c
-handle_qmp_command(void *mon, const char *cmd_name) "mon %p cmd_name \"%s\""
-monitor_protocol_emitter(void *mon) "mon %p"
monitor_protocol_event_handler(uint32_t event, void *qdict) "event=%d data=%p"
monitor_protocol_event_emit(uint32_t event, void *data) "event=%d data=%p"
monitor_protocol_event_queue(uint32_t event, void *qdict, uint64_t rate) "event=%d data=%p rate=%" PRId64
-monitor_protocol_event_throttle(uint32_t event, uint64_t rate) "event=%d rate=%" PRId64
-
-# target-sparc/mmu_helper.c
-mmu_helper_dfault(uint64_t address, uint64_t context, int mmu_idx, uint32_t tl) "DFAULT at %"PRIx64" context %"PRIx64" mmu_idx=%d tl=%d"
-mmu_helper_dprot(uint64_t address, uint64_t context, int mmu_idx, uint32_t tl) "DPROT at %"PRIx64" context %"PRIx64" mmu_idx=%d tl=%d"
-mmu_helper_dmiss(uint64_t address, uint64_t context) "DMISS at %"PRIx64" context %"PRIx64
-mmu_helper_tfault(uint64_t address, uint64_t context) "TFAULT at %"PRIx64" context %"PRIx64
-mmu_helper_tmiss(uint64_t address, uint64_t context) "TMISS at %"PRIx64" context %"PRIx64
-mmu_helper_get_phys_addr_code(uint32_t tl, int mmu_idx, uint64_t prim_context, uint64_t sec_context, uint64_t address) "tl=%d mmu_idx=%d primary context=%"PRIx64" secondary context=%"PRIx64" address=%"PRIx64
-mmu_helper_get_phys_addr_data(uint32_t tl, int mmu_idx, uint64_t prim_context, uint64_t sec_context, uint64_t address) "tl=%d mmu_idx=%d primary context=%"PRIx64" secondary context=%"PRIx64" address=%"PRIx64
-mmu_helper_mmu_fault(uint64_t address, uint64_t paddr, int mmu_idx, uint32_t tl, uint64_t prim_context, uint64_t sec_context) "Translate at %"PRIx64" -> %"PRIx64", mmu_idx=%d tl=%d primary context=%"PRIx64" secondary context=%"PRIx64
-
-# target-sparc/int64_helper.c
-int_helper_set_softint(uint32_t softint) "new %08x"
-int_helper_clear_softint(uint32_t softint) "new %08x"
-int_helper_write_softint(uint32_t softint) "new %08x"
-
-# target-sparc/int32_helper.c
-int_helper_icache_freeze(void) "Instruction cache: freeze"
-int_helper_dcache_freeze(void) "Data cache: freeze"
-
-# target-sparc/win_helper.c
-win_helper_gregset_error(uint32_t pstate) "ERROR in get_gregset: active pstate bits=%x"
-win_helper_switch_pstate(uint32_t pstate_regs, uint32_t new_pstate_regs) "change_pstate: switching regs old=%x new=%x"
-win_helper_no_switch_pstate(uint32_t new_pstate_regs) "change_pstate: regs new=%x (unchanged)"
-win_helper_wrpil(uint32_t psrpil, uint32_t new_pil) "old=%x new=%x"
-win_helper_done(uint32_t tl) "tl=%d"
-win_helper_retry(uint32_t tl) "tl=%d"
# dma-helpers.c
dma_blk_io(void *dbs, void *bs, int64_t offset, bool to_dev) "dbs=%p bs=%p offset=%" PRId64 " to_dev=%d"
dma_blk_cb(void *dbs, int ret) "dbs=%p ret=%d"
dma_map_wait(void *dbs) "dbs=%p"
-# target-s390x/mmu_helper.c
-get_skeys_nonzero(int rc) "SKEY: Call to get_skeys unexpectedly returned %d"
-set_skeys_nonzero(int rc) "SKEY: Call to set_skeys unexpectedly returned %d"
-
-# target-s390x/ioinst.c
-ioinst(const char *insn) "IOINST: %s"
-ioinst_sch_id(const char *insn, int cssid, int ssid, int schid) "IOINST: %s (%x.%x.%04x)"
-ioinst_chp_id(const char *insn, int cssid, int chpid) "IOINST: %s (%x.%02x)"
-ioinst_chsc_cmd(uint16_t cmd, uint16_t len) "IOINST: chsc command %04x, len %04x"
-
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_vm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
-
-# target-ppc/kvm.c
-kvm_failed_spr_set(int str, const char *msg) "Warning: Unable to set SPR %d to KVM: %s"
-kvm_failed_spr_get(int str, const char *msg) "Warning: Unable to retrieve SPR %d from KVM: %s"
+kvm_irqchip_commit_routes(void) ""
+kvm_irqchip_add_msi_route(int virq) "Adding MSI route virq=%d"
+kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
# TCG related tracing (mostly disabled by default)
# cpu-exec.c
memory_region_subpage_write(int cpu_index, void *mr, uint64_t offset, uint64_t value, unsigned size) "cpu %d mr %p offset %#"PRIx64" value %#"PRIx64" size %u"
memory_region_tb_read(int cpu_index, uint64_t addr, uint64_t value, unsigned size) "cpu %d addr %#"PRIx64" value %#"PRIx64" size %u"
memory_region_tb_write(int cpu_index, uint64_t addr, uint64_t value, unsigned size) "cpu %d addr %#"PRIx64" value %#"PRIx64" size %u"
-
-# qom/object.c
-object_dynamic_cast_assert(const char *type, const char *target, const char *file, int line, const char *func) "%s->%s (%s:%d:%s)"
-object_class_dynamic_cast_assert(const char *type, const char *target, const char *file, int line, const char *func) "%s->%s (%s:%d:%s)"
-
-# target-s390x/kvm.c
-kvm_enable_cmma(int rc) "CMMA: enabling with result code %d"
-kvm_clear_cmma(int rc) "CMMA: clearing with result code %d"
-kvm_failed_cpu_state_set(int cpu_index, uint8_t state, const char *msg) "Warning: Unable to set cpu %d state %" PRIu8 " to KVM: %s"
-kvm_sigp_finished(uint8_t order, int cpu_index, int dst_index, int cc) "SIGP: Finished order %u on cpu %d -> cpu %d with cc=%d"
-
-# target-s390x/cpu.c
-cpu_set_state(int cpu_index, uint8_t state) "setting cpu %d state to %" PRIu8
-cpu_halt(int cpu_index) "halting cpu %d"
-cpu_unhalt(int cpu_index) "unhalting cpu %d"
-
-# net/vhost-user.c
-vhost_user_event(const char *chr, int event) "chr: %s got event: %d"
-
-# linux-user/signal.c
-user_setup_frame(void *env, uint64_t frame_addr) "env=%p frame_addr=%"PRIx64
-user_setup_rt_frame(void *env, uint64_t frame_addr) "env=%p frame_addr=%"PRIx64
-user_do_rt_sigreturn(void *env, uint64_t frame_addr) "env=%p frame_addr=%"PRIx64
-user_do_sigreturn(void *env, uint64_t frame_addr) "env=%p frame_addr=%"PRIx64
-user_force_sig(void *env, int target_sig, int host_sig) "env=%p signal %d (host %d)"
-user_handle_signal(void *env, int target_sig) "env=%p signal %d"
-user_host_signal(void *env, int host_sig, int target_sig) "env=%p signal %d (target %d("
-user_queue_signal(void *env, int target_sig) "env=%p signal %d"
-user_s390x_restore_sigregs(void *env, uint64_t sc_psw_addr, uint64_t env_psw_addr) "env=%p frame psw.addr %"PRIx64 " current psw.addr %"PRIx64
+memory_region_ram_device_read(int cpu_index, void *mr, uint64_t addr, uint64_t value, unsigned size) "cpu %d mr %p addr %#"PRIx64" value %#"PRIx64" size %u"
+memory_region_ram_device_write(int cpu_index, void *mr, uint64_t addr, uint64_t value, unsigned size) "cpu %d mr %p addr %#"PRIx64" value %#"PRIx64" size %u"
### Guest events, keep at bottom
+
+## vCPU
+
+# Hot-plug a new virtual (guest) CPU
+#
+# Mode: user, softmmu
+# Targets: all
+vcpu guest_cpu_enter(void)
+
+# Hot-unplug a virtual (guest) CPU
+#
+# Mode: user, softmmu
+# Targets: all
+vcpu guest_cpu_exit(void)
+
+# Reset the state of a virtual (guest) CPU
+#
+# Mode: user, softmmu
+# Targets: all
+vcpu guest_cpu_reset(void)
+
# @vaddr: Access' virtual address.
# @info : Access' information (see below).
#
# bool store : 1; /* wheter it's a store operation */
# };
#
+# Mode: user, softmmu
# Targets: TCG(all)
disable vcpu tcg guest_mem_before(TCGv vaddr, uint8_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
+
+# @num: System call number.
+# @arg*: System call argument value.
+#
+# Start executing a guest system call in syscall emulation mode.
+#
+# Mode: user
+# Targets: TCG(all)
+disable vcpu guest_user_syscall(uint64_t num, uint64_t arg1, uint64_t arg2, uint64_t arg3, uint64_t arg4, uint64_t arg5, uint64_t arg6, uint64_t arg7, uint64_t arg8) "num=0x%016"PRIx64" arg1=0x%016"PRIx64" arg2=0x%016"PRIx64" arg3=0x%016"PRIx64" arg4=0x%016"PRIx64" arg5=0x%016"PRIx64" arg6=0x%016"PRIx64" arg7=0x%016"PRIx64" arg8=0x%016"PRIx64
+
+# @num: System call number.
+# @ret: System call result value.
+#
+# Finish executing a guest system call in syscall emulation mode.
+#
+# Mode: user
+# Targets: TCG(all)
+disable vcpu guest_user_syscall_ret(uint64_t num, uint64_t ret) "num=0x%016"PRIx64" ret=0x%016"PRIx64
projects / mirror_qemu.git / blobdiff