+++ /dev/null
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License (the "License").
- * You may not use this file except in compliance with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-/*
- * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
- * Copyright (c) 2013 by Delphix. All rights reserved.
- * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
- */
-
-#ifndef _SYS_SA_IMPL_H
-#define _SYS_SA_IMPL_H
-
-#include <sys/dmu.h>
-#include <sys/refcount.h>
-#include <sys/list.h>
-
-/*
- * Array of known attributes and their
- * various characteristics.
- */
-typedef struct sa_attr_table {
- sa_attr_type_t sa_attr;
- uint8_t sa_registered;
- uint16_t sa_length;
- sa_bswap_type_t sa_byteswap;
- char *sa_name;
-} sa_attr_table_t;
-
-/*
- * Zap attribute format for attribute registration
- *
- * 64 56 48 40 32 24 16 8 0
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- * | unused | len | bswap | attr num |
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- *
- * Zap attribute format for layout information.
- *
- * layout information is stored as an array of attribute numbers
- * The name of the attribute is the layout number (0, 1, 2, ...)
- *
- * 16 0
- * +---- ---+
- * | attr # |
- * +--------+
- * | attr # |
- * +--- ----+
- * ......
- *
- */
-
-#define ATTR_BSWAP(x) BF32_GET(x, 16, 8)
-#define ATTR_LENGTH(x) BF32_GET(x, 24, 16)
-#define ATTR_NUM(x) BF32_GET(x, 0, 16)
-#define ATTR_ENCODE(x, attr, length, bswap) \
-{ \
- BF64_SET(x, 24, 16, length); \
- BF64_SET(x, 16, 8, bswap); \
- BF64_SET(x, 0, 16, attr); \
-}
-
-#define TOC_OFF(x) BF32_GET(x, 0, 23)
-#define TOC_ATTR_PRESENT(x) BF32_GET(x, 31, 1)
-#define TOC_LEN_IDX(x) BF32_GET(x, 24, 4)
-#define TOC_ATTR_ENCODE(x, len_idx, offset) \
-{ \
- BF32_SET(x, 31, 1, 1); \
- BF32_SET(x, 24, 7, len_idx); \
- BF32_SET(x, 0, 24, offset); \
-}
-
-#define SA_LAYOUTS "LAYOUTS"
-#define SA_REGISTRY "REGISTRY"
-
-/*
- * Each unique layout will have their own table
- * sa_lot (layout_table)
- */
-typedef struct sa_lot {
- avl_node_t lot_num_node;
- avl_node_t lot_hash_node;
- uint64_t lot_num;
- uint64_t lot_hash;
- sa_attr_type_t *lot_attrs; /* array of attr #'s */
- uint32_t lot_var_sizes; /* how many aren't fixed size */
- uint32_t lot_attr_count; /* total attr count */
- list_t lot_idx_tab; /* should be only a couple of entries */
- int lot_instance; /* used with lot_hash to identify entry */
-} sa_lot_t;
-
-/* index table of offsets */
-typedef struct sa_idx_tab {
- list_node_t sa_next;
- sa_lot_t *sa_layout;
- uint16_t *sa_variable_lengths;
- refcount_t sa_refcount;
- uint32_t *sa_idx_tab; /* array of offsets */
-} sa_idx_tab_t;
-
-/*
- * Since the offset/index information into the actual data
- * will usually be identical we can share that information with
- * all handles that have the exact same offsets.
- *
- * You would typically only have a large number of different table of
- * contents if you had a several variable sized attributes.
- *
- * Two AVL trees are used to track the attribute layout numbers.
- * one is keyed by number and will be consulted when a DMU_OT_SA
- * object is first read. The second tree is keyed by the hash signature
- * of the attributes and will be consulted when an attribute is added
- * to determine if we already have an instance of that layout. Both
- * of these tree's are interconnected. The only difference is that
- * when an entry is found in the "hash" tree the list of attributes will
- * need to be compared against the list of attributes you have in hand.
- * The assumption is that typically attributes will just be updated and
- * adding a completely new attribute is a very rare operation.
- */
-struct sa_os {
- kmutex_t sa_lock;
- boolean_t sa_need_attr_registration;
- boolean_t sa_force_spill;
- uint64_t sa_master_obj;
- uint64_t sa_reg_attr_obj;
- uint64_t sa_layout_attr_obj;
- int sa_num_attrs;
- sa_attr_table_t *sa_attr_table; /* private attr table */
- sa_update_cb_t *sa_update_cb;
- avl_tree_t sa_layout_num_tree; /* keyed by layout number */
- avl_tree_t sa_layout_hash_tree; /* keyed by layout hash value */
- int sa_user_table_sz;
- sa_attr_type_t *sa_user_table; /* user name->attr mapping table */
-};
-
-/*
- * header for all bonus and spill buffers.
- *
- * The header has a fixed portion with a variable number
- * of "lengths" depending on the number of variable sized
- * attributes which are determined by the "layout number"
- */
-
-#define SA_MAGIC 0x2F505A /* ZFS SA */
-typedef struct sa_hdr_phys {
- uint32_t sa_magic;
- /*
- * Encoded with hdrsize and layout number as follows:
- * 16 10 0
- * +--------+-------+
- * | hdrsz |layout |
- * +--------+-------+
- *
- * Bits 0-10 are the layout number
- * Bits 11-16 are the size of the header.
- * The hdrsize is the number * 8
- *
- * For example.
- * hdrsz of 1 ==> 8 byte header
- * 2 ==> 16 byte header
- *
- */
- uint16_t sa_layout_info;
- uint16_t sa_lengths[1]; /* optional sizes for variable length attrs */
- /* ... Data follows the lengths. */
-} sa_hdr_phys_t;
-
-#define SA_HDR_LAYOUT_NUM(hdr) BF32_GET(hdr->sa_layout_info, 0, 10)
-#define SA_HDR_SIZE(hdr) BF32_GET_SB(hdr->sa_layout_info, 10, 6, 3, 0)
-#define SA_HDR_LAYOUT_INFO_ENCODE(x, num, size) \
-{ \
- BF32_SET_SB(x, 10, 6, 3, 0, size); \
- BF32_SET(x, 0, 10, num); \
-}
-
-typedef enum sa_buf_type {
- SA_BONUS = 1,
- SA_SPILL = 2
-} sa_buf_type_t;
-
-typedef enum sa_data_op {
- SA_LOOKUP,
- SA_UPDATE,
- SA_ADD,
- SA_REPLACE,
- SA_REMOVE
-} sa_data_op_t;
-
-/*
- * Opaque handle used for most sa functions
- *
- * This needs to be kept as small as possible.
- */
-
-struct sa_handle {
- dmu_buf_user_t sa_dbu;
- kmutex_t sa_lock;
- dmu_buf_t *sa_bonus;
- dmu_buf_t *sa_spill;
- objset_t *sa_os;
- void *sa_userp;
- sa_idx_tab_t *sa_bonus_tab; /* idx of bonus */
- sa_idx_tab_t *sa_spill_tab; /* only present if spill activated */
-};
-
-#define SA_GET_DB(hdl, type) \
- (dmu_buf_impl_t *)((type == SA_BONUS) ? hdl->sa_bonus : hdl->sa_spill)
-
-#define SA_GET_HDR(hdl, type) \
- ((sa_hdr_phys_t *)((dmu_buf_impl_t *)(SA_GET_DB(hdl, \
- type))->db.db_data))
-
-#define SA_IDX_TAB_GET(hdl, type) \
- (type == SA_BONUS ? hdl->sa_bonus_tab : hdl->sa_spill_tab)
-
-#define IS_SA_BONUSTYPE(a) \
- ((a == DMU_OT_SA) ? B_TRUE : B_FALSE)
-
-#define SA_BONUSTYPE_FROM_DB(db) \
- (dmu_get_bonustype((dmu_buf_t *)db))
-
-#define SA_BLKPTR_SPACE (DN_OLD_MAX_BONUSLEN - sizeof (blkptr_t))
-
-#define SA_LAYOUT_NUM(x, type) \
- ((!IS_SA_BONUSTYPE(type) ? 0 : (((IS_SA_BONUSTYPE(type)) && \
- ((SA_HDR_LAYOUT_NUM(x)) == 0)) ? 1 : SA_HDR_LAYOUT_NUM(x))))
-
-
-#define SA_REGISTERED_LEN(sa, attr) sa->sa_attr_table[attr].sa_length
-
-#define SA_ATTR_LEN(sa, idx, attr, hdr) ((SA_REGISTERED_LEN(sa, attr) == 0) ?\
- hdr->sa_lengths[TOC_LEN_IDX(idx->sa_idx_tab[attr])] : \
- SA_REGISTERED_LEN(sa, attr))
-
-#define SA_SET_HDR(hdr, num, size) \
- { \
- hdr->sa_magic = SA_MAGIC; \
- SA_HDR_LAYOUT_INFO_ENCODE(hdr->sa_layout_info, num, size); \
- }
-
-#define SA_ATTR_INFO(sa, idx, hdr, attr, bulk, type, hdl) \
- { \
- bulk.sa_size = SA_ATTR_LEN(sa, idx, attr, hdr); \
- bulk.sa_buftype = type; \
- bulk.sa_addr = \
- (void *)((uintptr_t)TOC_OFF(idx->sa_idx_tab[attr]) + \
- (uintptr_t)hdr); \
-}
-
-#define SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb) \
- (SA_HDR_SIZE(hdr) == (sizeof (sa_hdr_phys_t) + \
- (tb->lot_var_sizes > 1 ? P2ROUNDUP((tb->lot_var_sizes - 1) * \
- sizeof (uint16_t), 8) : 0)))
-
-int sa_add_impl(sa_handle_t *, sa_attr_type_t,
- uint32_t, sa_data_locator_t, void *, dmu_tx_t *);
-
-void sa_register_update_callback_locked(objset_t *, sa_update_cb_t *);
-int sa_size_locked(sa_handle_t *, sa_attr_type_t, int *);
-
-void sa_default_locator(void **, uint32_t *, uint32_t, boolean_t, void *);
-int sa_attr_size(sa_os_t *, sa_idx_tab_t *, sa_attr_type_t,
- uint16_t *, sa_hdr_phys_t *);
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _SYS_SA_IMPL_H */