UBUNTU: SAUCE: Redpine: Upgrade to ver. 1.2.RC9

UBUNTU: SAUCE: Redpine: Upgrade to ver. 1.2.RC9

BugLink: https://bugs.launchpad.net/bugs/1690498
Vendor release ver: 1.2.RC9

Changelog:

1.2.RC9 -
    WLAN Bug Fixes:
    ---------------
    1) BT reset added before going to S3/S4/S5 sleep when WoWLAN is enabled.
    2) Station connection check before going to S3/S4/S5 sleep removed.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.

    BT Limitations/Features NOT Supported:
    ----------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.2.RC8 -
    WLAN Bug Fixes:
    ---------------
    1) Added power leak fixes for S4.
    2) S5 WoLAN issue resolved.
    3) Wakeup short pulse issue resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.

    BT Limitations/Features NOT Supported:
    ----------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.2.RC7 -
    WLAN Bug Fixes:
    ---------------
    1) Configured host wakeup pin as active low from driver.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.

    BT Limitations/Features NOT Supported:
    ----------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.2.RC6 -
    WLAN Bug Fixes:
    ---------------
    1) AP data throughput issue resolved.
    2) Scan results issue resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.

    BT Limitations/Features NOT Supported:
    ----------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.2.RC4 -
    WLAN Bug Fixes:
    ---------------
    1) Buffer status interrupt handling improved.
    2) Scan results update in sta+bt dual mode issue resolved

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.

    BT Limitations/Features NOT Supported:
    ----------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.2.RC3 -
    WLAN Bug Fixes:
    ---------------
    1) WoWLAN multiple cycles issue resolved.
    2) Driver Version is correctly updated.
    3) Default operating mode for Caracalla board is corrected.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.

    BT New Features:
    ----------------
    1) Multiple slaves issue in WLAN-BT coex mode resolved.

    BT Limitations/Features NOT Supported:
    --------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.2.RC2 -
    WLAN Bug Fixes:
    ---------------
    1) Suspend/resume issues resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.
    3) EAP not tested

    BT Limitations/Features NOT Supported:
    --------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.2.RC1 -
    WLAN New Features:
    ------------------
    1) Restrict functional modes as per device operating mode
    2) Default operating mode for Caracalla board is 13

    WLAN Bug Fixes:
    ---------------
    1) Driver oops issue if more than 4 clients try to connect in
       operating mode 14 resolved.
    2) Issue with connecting more than max clients and disconnection
       issue resolved.
    3) L2 test stop when wlan interface down issue resolved.
    4) Driver version corrected.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.
    3) EAP not tested
    4) For channels 12 and 13 in US region max TX power is coming 0 in
       beacons.

    BT Limitations/Features NOT Supported:
    ----------------------------------------
    1) To connect multiple BT slaves, connection should be initiated
       from rsi module.
    2) In coex mode, BT file transfer fails at times with certain
       mobiles.

1.1 -
    Generic
    -------
    1) Firmware file name is displayed along with version information.
       at the driver load time.
    2) Device operating mode is made available in the below files:
       /sys/module/rsi_sdio/parameters/dev_oper_mode
       /sys/module/rsi_usb/parameters/dev_oper_mode
    3) Wi-Fi BT radio sharing has been improved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.
    3) EAP not tested
    4) For channels 12 and 13 in US region max TX power is coming 0 in beacons.

    BT Limitations/Features NOT Supported:
    --------------------------------------
    1) To connect multiple BT slaves, connection should be initiated from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.0.RC7 -
    Generic
    -------
    1) Driver version, Firmware version and operating mode information is displayed
       at the driver load time.
    2) Driver version is made available in the below files:
       /sys/module/rsi_91x/version
       /sys/module/rsi_sdio/version
       /sys/module/rsi_usb/version

    WLAN Bug Fixes:
    ---------------
    1) Power save latencies resolved

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.
    3) EAP not tested

    BT Limitations/Features NOT Supported:
    --------------------------------------
    1) To connect multiple BT slaves, connection should be initiated from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.0 -
    WLAN New Features:
    ------------------
    1) Station mode
    2) All Security modes (WEP/WPA/WPA2)
    3) Station Power save (legacy and UAPSD)
    4) Bgscan and roaming
    5) External antenna selection
    6) Neighbour report request in RRM
    7) Regulatory (802)11d) support
    8) Management frame protection support (802)11w)
    9) Software RF-kill
    10) AP mode
    11) S3, S4 suspend and resume
    12) WoWLAN
    13) AP Power save
    14) Wi-Fi direct

    WLAN Bug Fixes:
    ---------------
    1) Allowed channels 12 and 13 in FCC region.
    2) For the allowed channels 12 and 13 in any region, power configuration
       updated as per Caracalla regulatory rules.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S5 with WoWLAN does not work.
    2) For GTK rekey, wakeup trigger send to host.
    3) EAP not tested

    BT New Features:
    ----------------
    1) BT EDR mode
    2) BT LE mode
    3) BT coex mode (All the coex modes))
    4) Multi-slave mode supported)

    BT Limitations/Features NOT Supported:
    ----------------------------------------
    1) To connect multiple BT slaves, connection should be initiated from rsi module.
    2) In coex mode, BT file transfer fails at times with certain mobiles.

1.0_RC3 -
    Gerenic:
    --------
    1) Device operating mode is changed as module parameter. Please check
       README or TRM on how to configure this while loading the modules.
    2) Max number of stations supported in Wi-Fi AP alone mode is 32, and AP +
       BT coex mode is 4.
    3) AP + BT-EDR + BLE support added.

    WLAN Bug Fixes:
    ---------------
    1) Bgscan probe request issue resolved.
    2) WoWLAN before association issue resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) S4 with and without WoWLAN works with the work-around implemented by Canonical.
    2) S5 with WoWLAN does not work.
    3) For GTK rekey, wakeup trigger send to host.
    4) EAP not tested
    5) To connect multiple BT slaves, connection should be initiated from rsi module.
    6) In coex mode, BT file transfer fails at times with certain mobiles.

    BT New Features:
    ----------------
    1) Multi-slave mode supported.

    BT Bug Fixes:
    -------------
    1) Radio sharing of coex modes improved.

1.0.RC2 -
    WLAN Bug Fixes:
    ---------------
    1) PVB preparation issue in AP mode resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) EAP not supported
    2) Issue while Resume in S4 with or without WoWLAN.
    3) S5 with WoWLAN does not work.
    4) For GTK rekey, wakeup trigger send to host.

    BT Bug Fixes:
    -------------
    1) BT dual mode disconnection issue resolved
    2) AP BT dual mode issue resolved

1.0_RC1 -
    WLAN Bug Fixes:
    ---------------
    1) WoWLAN in Co-ex mode issue resolved.
    2) AP beacon DTIM count update issue resolved.
    3) Firmware assertion (0x5d) in bgscan issue is resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) EAP not supported
    2) Issue while Resume in S4 with or without WoWLAN.
    3) S5 with WoWLAN does not work.
    4) For GTK rekey, wakeup trigger send to host.

0.9.8.5_RC6 -
    WLAN Bug Fixes:
    ---------------
    1) Firmware CRC check fail issue resolved
    2) Compilation fails on 4.10.1 kernel issue resolved
    3) BG scan issues resolved
    4) AP mode regulatory fixes
    5) WoWLAN issues resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) EAP not supported
    2) Issue while Resume in S4 with or without WoWLAN.
    3) S5 with WoWLAN does not work.
    4) For GTK rekey, wakeup trigger send to host.

0.9.8.5_RC4 -
    WLAN Bug Fixes:
    -------------------
    1) AP mode configuration in channels 12 and 13 for EU region issue resolved.
    2) Data latencies in AP mode issue resolved.
    3) Roaming issues resolved.
    4) AP WEP mode issue resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) EAP not supported
    2) Issue while Resume in S4 with or without WoWLAN.
    3) S5 with WoWLAN does not work.
    4) For GTK rekey, wakeup trigger send to host.
    5) WoWLAN does not work in WEP mode.

    Others:
    -------
    1) USB binds only to RS9113, let upstream kernel driver handle other RSI chips

0.9.8.5_RC3 -
    WLAN Bug Fixes:
    -------------------
    1) Power save issue in station mode (By default UAPSD is enabled on
    Caracalla board) fixed.
    2) WoWLAN with S3 issue resolved

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) EAP not supported
    2) Not verified removing SDIO interrupt polling
    3) S4/S5 sleep states not supported (with and without WoWLAN)

0.9.8.5_RC2 -
    WLAN Bug Fixes:
    -------------------
    1) Power save issue in station mode (By default UAPSD is enabled on
    Caracalla board) fixed.
    2) Firmware assert 0x71 (while doing bgscan) issue fixed.
    3) Keep alive functionality in station mode issue fixed.
    4) Data traffic stops when connected to multiple stations issue resolved
    5) WoWLAN not working issue is resolved

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) EAP not supported
    2) Not verified removing SDIO interrupt polling
    3) S4/S5 sleep states not supported (with and without WoWLAN)
    4) Wi-Fi direct testing is in progress

0.9.8.5_RC1 -
    WLAN Bug Fixes:
    -------------------
    1) Observed unicast probe requests during bgscan issue fixed
    2) Firmware assert 0x71 (while doing bgscan) issue fixed.
    3) Crash when doing rmmod while data traffic is going on issue resolved.
    4) Beacons stopped after 5 minutes of data traffic issue fixed.
    5) Keep alive functionality in station mode issue fixed
    6) 11n data rates issue in station mode resolved.

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) EAP not supported
    2) Not verified removing SDIO interrupt polling
    3) S4/S5 sleep states not supported (with.without WoWLAN)
    4) power save is not working consistently
    5) WoWLAN is not working consistently

0.9.8.3 -
    WLAN New Features:
    -----------------------------------------
    1) AP Mode
    2) S3, S4 suspend and resume
    3) WoWLAN [Testing in progress]

    WLAN Bug Fixes:
    -------------------
    1) First EAPOL drop issue is resolved
    2) Firmware Assert while roaming issue is resolved
       (Provide driver bgsan should be enabled along with supplicant bgscan)
    3) Roaming takes longer time issue is resolved
    4) Added polling support as a work-around for the SDIO interrupt issue
       on some platforms

    WLAN Limitations/Features NOT Supported:
    ----------------------------------------
    1) Wi-Fi Direct mode not supported
    2) EAP not supported
    3) SDIO interrupts are not being delivered to the 9113 driver
    4) In S4 state 9113 device gets reset but device isn't getting re-enumerated.

Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>