The slot number displayed in info messages would cause a confusion
because those are displayed in several ways (decimal and hex).
Furthermore, those slot number is not same as slot name (directory
name). This patch fixes those improper info messages.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
-#define msg_button_on "PCI slot #%d - powering on due to button press.\n"
-#define msg_button_off "PCI slot #%d - powering off due to button press.\n"
-#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
-#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n"
+#define msg_button_on "PCI slot #%s - powering on due to button press.\n"
+#define msg_button_off "PCI slot #%s - powering off due to button press.\n"
+#define msg_button_cancel "PCI slot #%s - action canceled due to button press.\n"
+#define msg_button_ignore "PCI slot #%s - button press ignored. (action in progress...)\n"
/* controller functions */
extern int pciehp_event_start_thread (void);
/* controller functions */
extern int pciehp_event_start_thread (void);
static unsigned long pushbutton_pending; /* = 0 */
static unsigned long surprise_rm_pending; /* = 0 */
static unsigned long pushbutton_pending; /* = 0 */
static unsigned long surprise_rm_pending; /* = 0 */
+static inline char *slot_name(struct slot *p_slot)
+{
+ return p_slot->hotplug_slot->name;
+}
+
u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id)
{
struct controller *ctrl = (struct controller *) inst_id;
u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id)
{
struct controller *ctrl = (struct controller *) inst_id;
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
- info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Button pressed on Slot(%s)\n", slot_name(p_slot));
taskInfo->event_type = INT_BUTTON_PRESS;
if ((p_slot->state == BLINKINGON_STATE)
taskInfo->event_type = INT_BUTTON_PRESS;
if ((p_slot->state == BLINKINGON_STATE)
* or hot-remove
*/
taskInfo->event_type = INT_BUTTON_CANCEL;
* or hot-remove
*/
taskInfo->event_type = INT_BUTTON_CANCEL;
- info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Button cancel on Slot(%s)\n", slot_name(p_slot));
} else if ((p_slot->state == POWERON_STATE)
|| (p_slot->state == POWEROFF_STATE)) {
/* Ignore if the slot is on power-on or power-off state; this
} else if ((p_slot->state == POWERON_STATE)
|| (p_slot->state == POWEROFF_STATE)) {
/* Ignore if the slot is on power-on or power-off state; this
* hot-remove is undergoing
*/
taskInfo->event_type = INT_BUTTON_IGNORE;
* hot-remove is undergoing
*/
taskInfo->event_type = INT_BUTTON_IGNORE;
- info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Button ignore on Slot(%s)\n", slot_name(p_slot));
- info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Latch open on Slot(%s)\n", slot_name(p_slot));
taskInfo->event_type = INT_SWITCH_OPEN;
} else {
/*
* Switch closed
*/
taskInfo->event_type = INT_SWITCH_OPEN;
} else {
/*
* Switch closed
*/
- info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Latch close on Slot(%s)\n", slot_name(p_slot));
taskInfo->event_type = INT_SWITCH_CLOSE;
}
taskInfo->event_type = INT_SWITCH_CLOSE;
}
- info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Card present on Slot(%s)\n", slot_name(p_slot));
taskInfo->event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
taskInfo->event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
- info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Card not present on Slot(%s)\n", slot_name(p_slot));
taskInfo->event_type = INT_PRESENCE_OFF;
}
taskInfo->event_type = INT_PRESENCE_OFF;
}
/*
* power fault Cleared
*/
/*
* power fault Cleared
*/
- info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Power fault cleared on Slot(%s)\n", slot_name(p_slot));
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
* power fault
*/
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
* power fault
*/
- info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Power fault on Slot(%s)\n", slot_name(p_slot));
taskInfo->event_type = INT_POWER_FAULT;
info("power fault bit %x set\n", hp_slot);
}
taskInfo->event_type = INT_POWER_FAULT;
info("power fault bit %x set\n", hp_slot);
}
warn("Not a valid state\n");
return;
}
warn("Not a valid state\n");
return;
}
- info(msg_button_cancel, p_slot->number);
+ info(msg_button_cancel, slot_name(p_slot));
p_slot->state = STATIC_STATE;
}
/* ***********Button Pressed (No action on 1st press...) */
p_slot->state = STATIC_STATE;
}
/* ***********Button Pressed (No action on 1st press...) */
/* slot is on */
dbg("slot is on\n");
p_slot->state = BLINKINGOFF_STATE;
/* slot is on */
dbg("slot is on\n");
p_slot->state = BLINKINGOFF_STATE;
- info(msg_button_off, p_slot->number);
+ info(msg_button_off, slot_name(p_slot));
} else {
/* slot is off */
dbg("slot is off\n");
p_slot->state = BLINKINGON_STATE;
} else {
/* slot is off */
dbg("slot is off\n");
p_slot->state = BLINKINGON_STATE;
- info(msg_button_on, p_slot->number);
+ info(msg_button_on, slot_name(p_slot));
}
/* Wait for exclusive access to hardware */
}
/* Wait for exclusive access to hardware */
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("%s: no adapter on slot(%s)\n", __FUNCTION__,
+ slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (MRL_SENS(p_slot->ctrl->ctrlcap)) {
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (MRL_SENS(p_slot->ctrl->ctrlcap)) {
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("%s: latch open on slot(%s)\n", __FUNCTION__,
+ slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("%s: already enabled on slot(%s)\n", __FUNCTION__,
+ slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
if (!HP_SUPR_RM(p_slot->ctrl->ctrlcap)) {
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (ret || !getstatus) {
if (!HP_SUPR_RM(p_slot->ctrl->ctrlcap)) {
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (ret || !getstatus) {
- info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("%s: no adapter on slot(%s)\n", __FUNCTION__,
+ slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (MRL_SENS(p_slot->ctrl->ctrlcap)) {
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
if (MRL_SENS(p_slot->ctrl->ctrlcap)) {
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
- info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("%s: latch open on slot(%s)\n", __FUNCTION__,
+ slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
- info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("%s: already disabled slot(%s)\n", __FUNCTION__,
+ slot_name(p_slot));
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}