Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
- /* Don't use the cached interupt_request value,
+ /* Don't use the cached interrupt_request value,
do_interrupt may have updated the EXITTB flag. */
if (env->interrupt_request & CPU_INTERRUPT_EXITTB) {
env->interrupt_request &= ~CPU_INTERRUPT_EXITTB;
do_interrupt may have updated the EXITTB flag. */
if (env->interrupt_request & CPU_INTERRUPT_EXITTB) {
env->interrupt_request &= ~CPU_INTERRUPT_EXITTB;
case MST_MSCRD:
s->mscrd = value;
break;
case MST_MSCRD:
s->mscrd = value;
break;
- case MST_INTMSKENA: /* Mask interupt */
+ case MST_INTMSKENA: /* Mask interrupt */
s->intmskena = (value & 0xFEEFF);
qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
break;
s->intmskena = (value & 0xFEEFF);
qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
break;
pl031_update(s);
break;
case RTC_ICR:
pl031_update(s);
break;
case RTC_ICR:
- /* The PL031 documentation (DDI0224B) states that the interupt is
+ /* The PL031 documentation (DDI0224B) states that the interrupt is
cleared when bit 0 of the written value is set. However the
arm926e documentation (DDI0287B) states that the interrupt is
cleared when any value is written. */
cleared when bit 0 of the written value is set. However the
arm926e documentation (DDI0287B) states that the interrupt is
cleared when any value is written. */
return s->isense;
case 0x408: /* Interrupt both edges */
return s->ibe;
return s->isense;
case 0x408: /* Interrupt both edges */
return s->ibe;
- case 0x40c: /* Interupt event */
+ case 0x40c: /* Interrupt event */
return s->iev;
case 0x410: /* Interrupt mask */
return s->im;
return s->iev;
case 0x410: /* Interrupt mask */
return s->im;
case 0x408: /* Interrupt both edges */
s->ibe = value;
break;
case 0x408: /* Interrupt both edges */
s->ibe = value;
break;
- case 0x40c: /* Interupt event */
+ case 0x40c: /* Interrupt event */
s->iev = value;
break;
case 0x410: /* Interrupt mask */
s->iev = value;
break;
case 0x410: /* Interrupt mask */
((1 << CP0C2_M))
/* No config4, no DSP ASE, no large physaddr (PABITS),
((1 << CP0C2_M))
/* No config4, no DSP ASE, no large physaddr (PABITS),
- no external interrupt controller, no vectored interupts,
+ no external interrupt controller, no vectored interrupts,
no 1kb pages, no SmartMIPS ASE, no trace logic */
#define MIPS_CONFIG3 \
((0 << CP0C3_M) | (0 << CP0C3_DSPP) | (0 << CP0C3_LPA) | \
no 1kb pages, no SmartMIPS ASE, no trace logic */
#define MIPS_CONFIG3 \
((0 << CP0C3_M) | (0 << CP0C3_DSPP) | (0 << CP0C3_LPA) | \