Contact: Konrad Rzeszutek <ketuzsezr@darnok.org>
Description: The /sys/firmware/ibft/ethernetX directory will contain
files that expose the iSCSI Boot Firmware Table NIC data.
- This can this can the IP address, MAC, and gateway of the NIC.
+ Usually this contains the IP address, MAC, and gateway of the NIC.
PHONY += cleanmediadocs
cleanmediadocs:
- -@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
+ -@rm -f `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
$(obj)/media_api.xml: $(GENFILES) FORCE
testing repository exists into which virtually all subsystem trees are
pulled on an almost daily basis:
http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
- http://linux.f-seidel.de/linux-next/pmwiki/
This way, the -next kernel gives a summary outlook onto what will be
expected to go into the mainline kernel at the next merge period.
14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
-If this patch fixes a problem reported by somebody else, consider adding a
-Reported-by: tag to credit the reporter for their contribution. Please
-note that this tag should not be added without the reporter's permission,
-especially if the problem was not reported in a public forum. That said,
-if we diligently credit our bug reporters, they will, hopefully, be
-inspired to help us again in the future.
+The Reported-by tag gives credit to people who find bugs and report them and it
+hopefully inspires them to help us again in the future. Please note that if
+the bug was reported in private, then ask for permission first before using the
+Reported-by tag.
A Tested-by: tag indicates that the patch has been successfully tested (in
some environment) by the person named. This tag informs maintainers that
http://www.kernel.org/pub/linux/kernel/next/
-Some information about linux-next has been gathered at:
-
- http://linux.f-seidel.de/linux-next/pmwiki/
-
Linux-next has become an integral part of the kernel development process;
all patches merged during a given merge window should really have found
their way into linux-next some time before the merge window opens.
http://kernelnewbies.org/
-Information about the linux-next tree gathers at:
-
- http://linux.f-seidel.de/linux-next/pmwiki/
-
And, of course, one should not forget http://kernel.org/, the definitive
location for kernel release information.
are supported on the device. Valid value for SMSC LAN91c111 are
1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning
16-bit access only.
+- power-gpios: GPIO to control the PWRDWN pin
+- reset-gpios: GPIO to control the RESET pin
- clocks : the clock provider of SYS_MCLK
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
Example:
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 150>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
};
devicetree@vger.kernel.org
+ 3) The Documentation/ portion of the patch should come in the series before
+ the code implementing the binding.
+
II. For kernel maintainers
1) If you aren't comfortable reviewing a given binding, reply to it and ask
- "renesas,thermal-r8a73a4" (R-Mobile AP6)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- - "renesas,thermal-r8a7791" (R-Car M2)
+ - "renesas,thermal-r8a7791" (R-Car M2-W)
+ - "renesas,thermal-r8a7792" (R-Car V2H)
+ - "renesas,thermal-r8a7793" (R-Car M2-N)
+ - "renesas,thermal-r8a7794" (R-Car E2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
i8042.noloop [HW] Disable the AUX Loopback command while probing
for the AUX port
i8042.nomux [HW] Don't check presence of an active multiplexing
- controller. Default: true.
+ controller
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
controllers
i8042.notimeout [HW] Ignore timeout condition signalled by controller
.cdrom .chs .ignore_cable are additional options
See Documentation/ide/ide.txt.
+ ide-generic.probe-mask= [HW] (E)IDE subsystem
+ Format: <int>
+ Probe mask for legacy ISA IDE ports. Depending on
+ platform up to 6 ports are supported, enabled by
+ setting corresponding bits in the mask to 1. The
+ default value is 0x0, which has a special meaning.
+ On systems that have PCI, it triggers scanning the
+ PCI bus for the first and the second port, which
+ are then probed. On systems without PCI the value
+ of 0x0 enables probing the two first ports as if it
+ was 0x3.
+
ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
Claim all unknown PCI IDE storage controllers.
kmemleak= [KNL] Boot-time kmemleak enable/disable
Valid arguments: on, off
Default: on
+ Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
+ the default is off.
kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode
Valid arguments: 0, 1, 2
usb-storage.delay_use=
[UMS] The delay in seconds before a new device is
- scanned for Logical Units (default 5).
+ scanned for Logical Units (default 1).
usb-storage.quirks=
[UMS] A list of quirks entries to supplement or
these actions are stored in an early log buffer. The size of this buffer
is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
+disabled by default. Passing "kmemleak=on" on the kernel command
+line enables the function.
+
Basic Algorithm
---------------
# List of programs to build
-hostprogs-y := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
+hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
# Tell kbuild to always build the programs
always := $(hostprogs-y)
--- /dev/null
+# PTP 1588 clock support - User space test program
+#
+# Copyright (C) 2010 OMICRON electronics GmbH
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+CC = $(CROSS_COMPILE)gcc
+INC = -I$(KBUILD_OUTPUT)/usr/include
+CFLAGS = -Wall $(INC)
+LDLIBS = -lrt
+PROGS = testptp
+
+all: $(PROGS)
+
+testptp: testptp.o
+
+clean:
+ rm -f testptp.o
+
+distclean: clean
+ rm -f $(PROGS)
HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99
HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector
HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib
+ifeq ($(CONFIG_X86_32),y)
+HOSTLOADLIBES_vdso_standalone_test_x86 += -lgcc_s
+endif
x86_syscall3(__NR_exit, code, 0, 0);
}
-void to_base10(char *lastdig, uint64_t n)
+void to_base10(char *lastdig, time_t n)
{
while (n) {
*lastdig = (n % 10) + '0';
key, not quality.
multiplanar: select whether each device instance supports multi-planar formats,
- and thus the V4L2 multi-planar API. By default the first device instance
- is single-planar, the second multi-planar, and it keeps alternating.
+ and thus the V4L2 multi-planar API. By default device instances are
+ single-planar.
This module option can override that for each instance. Values are:
- 0: use alternating single and multi-planar devices.
1: this is a single-planar instance.
2: this is a multi-planar instance.
0 otherwise.
The driver has to be configured to support the multiplanar formats. By default
-the first driver instance is single-planar, the second is multi-planar, and it
-keeps alternating. This can be changed by setting the multiplanar module option,
-see section 1 for more details on that option.
+the driver instances are single-planar. This can be changed by setting the
+multiplanar module option, see section 1 for more details on that option.
If the driver instance is using the multiplanar formats/API, then the first
single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
to see the blended framebuffer overlay that's being written to by the second
instance. This setup would require the following commands:
- $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1
+ $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
$ v4l2-ctl -d1 --find-fb
/dev/fb1 is the framebuffer associated with base address 0x12800000
$ sudo v4l2-ctl -d2 --set-fbuf fb=1
/mnt/huge. Any files created on /mnt/huge uses huge pages. The uid and gid
options sets the owner and group of the root of the file system. By default
the uid and gid of the current process are taken. The mode option sets the
-mode of root of file system to value & 0777. This value is given in octal.
+mode of root of file system to value & 01777. This value is given in octal.
By default the value 0755 is picked. The size option sets the maximum value of
memory (huge pages) allowed for that filesystem (/mnt/huge). The size is
rounded down to HPAGE_SIZE. The option nr_inodes sets the maximum number of
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
+R: Sören Brinkmann <soren.brinkmann@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://wiki.xilinx.com
T: git git://git.xilinx.com/linux-xlnx.git
BROADCOM BCM2835 ARM ARCHITECTURE
M: Stephen Warren <swarren@wwwdotorg.org>
+M: Lee Jones <lee@kernel.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
F: drivers/block/cpqarray.*
HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa)
-M: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
+M: Don Brace <don.brace@pmcs.com>
L: iss_storagedev@hp.com
+L: storagedev@pmcs.com
+L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/hpsa.txt
F: drivers/scsi/hpsa*.[ch]
F: include/uapi/linux/cciss*.h
HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-M: Mike Miller <mike.miller@hp.com>
+M: Don Brace <don.brace@pmcs.com>
L: iss_storagedev@hp.com
+L: storagedev@pmcs.com
+L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/blockdev/cciss.txt
F: drivers/block/cciss*
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
M: Kevin Hilman <khilman@deeprootsystems.com>
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Supported
TI DAVINCI SERIES MEDIA DRIVER
M: Lad, Prabhakar <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER
M: Vinayak Holikatti <vinholikatti@gmail.com>
-M: Santosh Y <santoshsy@gmail.com>
L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/ufs.txt
F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
-USB/IP DRIVERS
-L: linux-usb@vger.kernel.org
-S: Orphan
-F: drivers/staging/usbip/
-
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
VERSION = 3
PATCHLEVEL = 18
SUBLEVEL = 0
-EXTRAVERSION = -rc2
-NAME = Shuffling Zombie Juror
+EXTRAVERSION = -rc4
+NAME = Diseased Newt
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
- default 0xf2100000 if DEBUG_PXA_UART1
+ default 0xf6200000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
bank-width = <2>;
pinctrl-names = "default";
pinctrl-0 = <ðernet_pins>;
+ power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
+ reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
};
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
&iomuxc {
vf610-cosmic {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
};
};
+&clkc {
+ fclk-enable = <0xf>;
+};
+
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
+#include <linux/dma-mapping.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
int ret;
+ struct platform_device_info edma_dev_info = {
+ .name = "edma-dma-engine",
+ .dma_mask = DMA_BIT_MASK(32),
+ .parent = &pdev->dev,
+ };
if (node) {
/* Check if this is a second instance registered */
edma_write_array(j, EDMA_QRAE, i, 0x0);
}
arch_num_cc++;
+
+ edma_dev_info.id = j;
+ platform_device_register_full(&edma_dev_info);
}
return 0;
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
CONFIG_SPI_XILINX=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DWAPB=y
CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
+CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS4_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_HOTPLUG=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SOCFPGA=y
-CONFIG_MACH_SOCFPGA_CYCLONE5=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_GW=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SRAM=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_SOCFPGA=y
CONFIG_MICREL_PHY=y
-# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
CONFIG_INPUT_EVDEV=y
-CONFIG_DWMAC_SOCFPGA=y
-CONFIG_PPS=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_GARP=y
-CONFIG_IPV6=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
-# CONFIG_RTC_HCTOSYS is not set
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_HOST=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_FHANDLE=y
+CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
-CONFIG_I2C=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_PM=y
-CONFIG_SUSPEND=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_DWC2_PLATFORM=y
#define __NR_seccomp (__NR_SYSCALL_BASE+383)
#define __NR_getrandom (__NR_SYSCALL_BASE+384)
#define __NR_memfd_create (__NR_SYSCALL_BASE+385)
+#define __NR_bpf (__NR_SYSCALL_BASE+386)
/*
* The following SWIs are ARM private.
CALL(sys_seccomp)
CALL(sys_getrandom)
/* 385 */ CALL(sys_memfd_create)
+ CALL(sys_bpf)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
+#define PLL1_CTRL (anatop_base + 0x270)
+#define PLL2_CTRL (anatop_base + 0x30)
#define PLL3_CTRL (anatop_base + 0x10)
+#define PLL4_CTRL (anatop_base + 0x70)
+#define PLL5_CTRL (anatop_base + 0xe0)
+#define PLL6_CTRL (anatop_base + 0xa0)
#define PLL7_CTRL (anatop_base + 0x20)
+#define ANA_MISC1 (anatop_base + 0x160)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
/* sources for multiplexer clocks, this is used multiple times */
static const char *fast_sels[] = { "firc", "fxosc", };
static const char *slow_sels[] = { "sirc_32k", "sxosc", };
-static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", };
+static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
-static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
/* FTM counter clock source, not module clock */
static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
-static struct clk_div_table pll4_main_div_table[] = {
+
+static struct clk_div_table pll4_audio_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 6 },
clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
+ /* Clock source from external clock via LVDs PAD */
+ clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
- clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
- clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
- clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
- clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
-
- clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
- clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
- clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
- clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
-
- clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
- clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
- clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
- clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
- clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
-
- clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
- /* Enet pll: fixed 50Mhz */
- clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
- /* pll6: default 960Mhz */
- clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
- /* pll7: USB1 PLL at 480MHz */
- clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+ clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
+ clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
+ clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+ clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
+ clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
+ clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
+ clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
+
+ clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
+ clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
+ clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
+ clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
+ clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
+ clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
+ clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
+
+ clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
+ clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
+ clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
+ clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
+ clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
+ clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
+ clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
+
+ clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
+
+ clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
+ clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
+ clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
+ clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
+
+ clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
+ clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
+ clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
+ clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
+
+ clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
+ clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
+ clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
+ clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
- clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
- clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
- clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
+ clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
+ clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
+ clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
- clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
- clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+ clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
+ clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
- clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
+ clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
+ clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
u32 n, byte_enables, data;
if (!is_pci_memory(addr)) {
- __raw_writeb(value, addr);
+ __raw_writeb(value, p);
return;
}
u32 n, byte_enables, data;
if (!is_pci_memory(addr))
- return __raw_readb(addr);
+ return __raw_readb(p);
n = addr % 4;
byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
static int __init omap_device_late_init(void)
{
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+
+ WARN(!of_have_populated_dt(),
+ "legacy booting deprecated, please update to boot with .dts\n");
+
return 0;
}
omap_late_initcall_sync(omap_device_late_init);
platform_device_register(&omap3_rom_rng_device);
}
-
- /* Only on some development boards */
- gpio_request_one(164, GPIOF_OUT_INIT_LOW, "smc91x reset");
}
static void __init omap3_tao3530_legacy_init(void)
#define DMEMC_VIRT IOMEM(0xf6100000)
#define DMEMC_SIZE 0x00100000
+/*
+ * Reserved space for low level debug virtual addresses within
+ * 0xf6200000..0xf6201000
+ */
+
/*
* Internal Memory Controller (PXA27x and later)
*/
* @associativity: variable to return the calculated associativity in
* @max_way_size: the maximum size in bytes for the cache ways
*/
-static void __init l2x0_cache_size_of_parse(const struct device_node *np,
+static int __init l2x0_cache_size_of_parse(const struct device_node *np,
u32 *aux_val, u32 *aux_mask,
u32 *associativity,
u32 max_way_size)
of_property_read_u32(np, "cache-line-size", &line_size);
if (!cache_size || !sets)
- return;
+ return -ENODEV;
/* All these l2 caches have the same line = block size actually */
if (!line_size) {
if (way_size > max_way_size) {
pr_err("L2C OF: set size %dKB is too large\n", way_size);
- return;
+ return -EINVAL;
}
pr_info("L2C OF: override cache size: %d bytes (%dKB)\n",
if (way_size_bits < 1 || way_size_bits > 6) {
pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",
way_size);
- return;
+ return -EINVAL;
}
mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
+
+ return 0;
}
static void __init l2x0_of_parse(const struct device_node *np,
u32 dirty = 0;
u32 val = 0, mask = 0;
u32 assoc;
+ int ret;
of_property_read_u32(np, "arm,tag-latency", &tag);
if (tag) {
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
}
- l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
+ ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
+ if (ret)
+ return;
+
if (assoc > 8) {
pr_err("l2x0 of: cache setting yield too high associativity\n");
pr_err("l2x0 of: %d calculated, max 8\n", assoc);
u32 tag[3] = { 0, 0, 0 };
u32 filter[2] = { 0, 0 };
u32 assoc;
+ int ret;
of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
if (tag[0] && tag[1] && tag[2])
l2x0_base + L310_ADDR_FILTER_START);
}
- l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
+ ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
+ if (ret)
+ return;
+
switch (assoc) {
case 16:
*aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
*aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
break;
default:
- pr_err("PL310 OF: cache setting yield illegal associativity\n");
- pr_err("PL310 OF: %d calculated, only 8 and 16 legal\n", assoc);
+ pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n",
+ assoc);
break;
}
}
{
return dma_common_pages_remap(pages, size,
VM_ARM_DMA_CONSISTENT | VM_USERMAP, prot, caller);
- return NULL;
}
/*
{
unsigned long vaddr;
int idx, type;
+ struct page *page = pfn_to_page(pfn);
pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
type = kmap_atomic_idx_push();
idx = type + KM_TYPE_NR * smp_processor_id();
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_XGENE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_XGENE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_KSM=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
+CONFIG_BPF_JIT=y
# CONFIG_WIRELESS is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_XGENE=y
-CONFIG_PHY_XGENE=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_VIRTIO_NET=y
+CONFIG_NET_XGENE=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
-CONFIG_NET_XGENE=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
+# CONFIG_HMC_DRV is not set
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_XGENE=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_XGENE=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
__SYSCALL(__NR_getrandom, sys_getrandom)
#define __NR_memfd_create 385
__SYSCALL(__NR_memfd_create, sys_memfd_create)
+#define __NR_bpf 386
+__SYSCALL(__NR_bpf, sys_bpf)
if (WARN_ON_ONCE(!index))
return -EINVAL;
- if (state->type == PSCI_POWER_STATE_TYPE_STANDBY)
+ if (state[index - 1].type == PSCI_POWER_STATE_TYPE_STANDBY)
ret = psci_ops.cpu_suspend(state[index - 1], 0);
else
ret = __cpu_suspend(index, psci_suspend_finisher);
#include <uapi/asm/unistd.h>
-#define NR_syscalls 354
+#define NR_syscalls 355
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
#define __NR_renameat2 351
#define __NR_getrandom 352
#define __NR_memfd_create 353
+#define __NR_bpf 354
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
.long sys_renameat2
.long sys_getrandom
.long sys_memfd_create
+ .long sys_bpf
menu "Kernel features"
+config NR_CPUS
+ int
+ default "1"
+
config ADVANCED_OPTIONS
bool "Prompt for advanced kernel configuration options"
help
#endif /* __ASSEMBLY__ */
-#define __NR_syscalls 387
+#define __NR_syscalls 388
#endif /* _ASM_MICROBLAZE_UNISTD_H */
#define __NR_seccomp 384
#define __NR_getrandom 385
#define __NR_memfd_create 386
+#define __NR_bpf 387
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
.long sys_seccomp
.long sys_getrandom /* 385 */
.long sys_memfd_create
+ .long sys_bpf
res = &hose->mem_resources[memno++];
break;
}
- if (res != NULL)
- of_pci_range_to_resource(&range, dev, res);
+ if (res != NULL) {
+ res->name = dev->full_name;
+ res->flags = range.flags;
+ res->start = range.cpu_addr;
+ res->end = range.cpu_addr + range.size - 1;
+ res->parent = res->child = res->sibling = NULL;
+ }
}
/* If there's an ISA hole and the pci_mem_offset is -not- matching
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
+#
+# pass -msoft-float to GAS if it supports it. However on newer binutils
+# (specifically newer than 2.24.51.20140728) we then also need to explicitly
+# set ".set hardfloat" in all files which manipulate floating point registers.
+#
+ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
+ cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
+endif
+
cflags-y += -ffreestanding
#
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
#include <asm/mipsregs.h>
.macro fpu_save_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
swc1 $f0, THREAD_FPR0_LS64(\thread)
swc1 $f1, THREAD_FPR1_LS64(\thread)
swc1 $f30, THREAD_FPR30_LS64(\thread)
swc1 $f31, THREAD_FPR31_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_restore_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
lwc1 $f0, THREAD_FPR0_LS64(\thread)
lwc1 $f1, THREAD_FPR1_LS64(\thread)
lwc1 $f30, THREAD_FPR30_LS64(\thread)
lwc1 $f31, THREAD_FPR31_LS64(\thread)
ctc1 \tmp, fcr31
+ .set pop
.endm
.macro cpu_save_nonscratch thread
#endif /* CONFIG_CPU_MIPSR2 */
.macro fpu_save_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
sdc1 $f0, THREAD_FPR0_LS64(\thread)
sdc1 $f2, THREAD_FPR2_LS64(\thread)
sdc1 $f28, THREAD_FPR28_LS64(\thread)
sdc1 $f30, THREAD_FPR30_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_save_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
sdc1 $f1, THREAD_FPR1_LS64(\thread)
sdc1 $f3, THREAD_FPR3_LS64(\thread)
sdc1 $f5, THREAD_FPR5_LS64(\thread)
.endm
.macro fpu_restore_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
ldc1 $f0, THREAD_FPR0_LS64(\thread)
ldc1 $f2, THREAD_FPR2_LS64(\thread)
.macro fpu_restore_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
ldc1 $f1, THREAD_FPR1_LS64(\thread)
ldc1 $f3, THREAD_FPR3_LS64(\thread)
ldc1 $f5, THREAD_FPR5_LS64(\thread)
.macro cfcmsa rd, cs
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word CFC_MSA_INSN | (\cs << 11)
move \rd, $1
.macro ctcmsa cd, rs
.set push
.set noat
+ SET_HARDFLOAT
move $1, \rs
.word CTC_MSA_INSN | (\cd << 6)
.set pop
.macro ld_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word LDD_MSA_INSN | (\wd << 6)
.set pop
.macro st_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word STD_MSA_INSN | (\wd << 6)
.set pop
.macro copy_u_w rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
.macro copy_u_d rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
.macro insert_w wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
.macro insert_d wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
st_d 31, THREAD_FPR31, \thread
.set push
.set noat
+ SET_HARDFLOAT
cfcmsa $1, MSA_CSR
sw $1, THREAD_MSA_CSR(\thread)
.set pop
.macro msa_restore_all thread
.set push
.set noat
+ SET_HARDFLOAT
lw $1, THREAD_MSA_CSR(\thread)
ctcmsa MSA_CSR, $1
.set pop
.macro msa_init_all_upper
.set push
.set noat
+ SET_HARDFLOAT
not $1, zero
msa_init_upper 0
.set pop
#include <asm/sgidefs.h>
+/*
+ * starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing
+ * hardfloat and softfloat object files. The kernel build uses soft-float by
+ * default, so we also need to pass -msoft-float along to GAS if it supports it.
+ * But this in turn causes assembler errors in files which access hardfloat
+ * registers. We detect if GAS supports "-msoft-float" in the Makefile and
+ * explicitly put ".set hardfloat" where floating point registers are touched.
+ */
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define SET_HARDFLOAT .set hardfloat
+#else
+#define SET_HARDFLOAT
+#endif
+
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
if (is_msa_enabled()) {
if (save) {
save_msa(current);
- asm volatile("cfc1 %0, $31"
- : "=r"(current->thread.fpu.fcr31));
+ current->thread.fpu.fcr31 =
+ read_32bit_cp1_register(CP1_STATUS);
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);
/*
* Macros to access the floating point coprocessor control registers
*/
-#define read_32bit_cp1_register(source) \
+#define _read_32bit_cp1_register(source, gas_hardfloat) \
({ \
int __res; \
\
" # gas fails to assemble cfc1 for some archs, \n" \
" # like Octeon. \n" \
" .set mips1 \n" \
+ " "STR(gas_hardfloat)" \n" \
" cfc1 %0,"STR(source)" \n" \
" .set pop \n" \
: "=r" (__res)); \
__res; \
})
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, .set hardfloat)
+#else
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, )
+#endif
+
#ifdef HAVE_AS_DSP
#define rddsp(mask) \
({ \
#define __NR_seccomp (__NR_Linux + 352)
#define __NR_getrandom (__NR_Linux + 353)
#define __NR_memfd_create (__NR_Linux + 354)
+#define __NR_bpf (__NR_Linux + 355)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 354
+#define __NR_Linux_syscalls 355
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 354
+#define __NR_O32_Linux_syscalls 355
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_seccomp (__NR_Linux + 312)
#define __NR_getrandom (__NR_Linux + 313)
#define __NR_memfd_create (__NR_Linux + 314)
+#define __NR_bpf (__NR_Linux + 315)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 314
+#define __NR_Linux_syscalls 315
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 314
+#define __NR_64_Linux_syscalls 315
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
+#define __NR_memfd_create (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 318
+#define __NR_Linux_syscalls 319
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 318
+#define __NR_N32_Linux_syscalls 319
#endif /* _UAPI_ASM_UNISTD_H */
case mm_bc1t_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
case cop1_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
+ SET_HARDFLOAT
cfc1 a1, fcr31
li a2, ~(0x3f << 12)
and a2, a1
.set mips1
/* Save floating point context */
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1,fcr31
EX(swc1 $f0,(SC_FPREGS+0)(a0))
EX(sw t1,(SC_FPC_CSR)(a0))
cfc1 t0,$0 # implementation/version
jr ra
+ .set pop
.set nomacro
EX(sw t0,(SC_FPC_EIR)(a0))
.set macro
* stack frame which might have been changed by the user.
*/
LEAF(_restore_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0,(SC_FPC_CSR)(a0))
EX(lwc1 $f0,(SC_FPREGS+0)(a0))
EX(lwc1 $f31,(SC_FPREGS+248)(a0))
jr ra
ctc1 t0,fcr31
+ .set pop
END(_restore_fp_context)
.set reorder
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
mtc1 t0, $f31
jr ra
END(_init_fpu)
+
+ .set pop
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
.macro EX insn, reg, src
.set push
+ SET_HARDFLOAT
.set nomacro
.ex\@: \insn \reg, \src
.set pop
.set arch=r4000
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
+ .set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip storing odd if FR=0
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
/* Store the 16 even double precision registers */
EX sdc1 $f0, SC_FPREGS+0(a0)
EX sdc1 $f2, SC_FPREGS+16(a0)
EX sw t1, SC_FPC_CSR(a0)
jr ra
li v0, 0 # success
+ .set pop
END(_save_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
/* Save 32-bit process floating point context */
LEAF(_save_fp_context32)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
mfc0 t0, CP0_STATUS
EX sw t1, SC32_FPC_CSR(a0)
cfc1 t0, $0 # implementation/version
EX sw t0, SC32_FPC_EIR(a0)
+ .set pop
jr ra
li v0, 0 # success
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip loading odd if FR=0
EX ldc1 $f31, SC_FPREGS+248(a0)
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
EX ldc1 $f0, SC_FPREGS+0(a0)
EX ldc1 $f2, SC_FPREGS+16(a0)
EX ldc1 $f4, SC_FPREGS+32(a0)
EX ldc1 $f28, SC_FPREGS+224(a0)
EX ldc1 $f30, SC_FPREGS+240(a0)
ctc1 t1, fcr31
+ .set pop
jr ra
li v0, 0 # success
END(_restore_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
+ .set push
+ SET_HARDFLOAT
EX lw t1, SC32_FPC_CSR(a0)
mfc0 t0, CP0_STATUS
ctc1 t1, fcr31
jr ra
li v0, 0 # success
+ .set pop
END(_restore_fp_context32)
#endif
#include <asm/asmmacro.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
/*
* Offset to the current process status flags, the first 32 bytes of the
* stack are not used.
bgtz a3, 1f
/* Save 128b MSA vector context + scalar FP control & status. */
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
msa_save_all a0
+ .set pop /* SET_HARDFLOAT */
+
sw t1, THREAD_FCR31(a0)
b 2f
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
#ifdef CONFIG_CPU_MIPS32_R2
.set push
- .set mips64r2
+ .set mips32r2
+ .set fp=64
sll t0, t0, 5 # is Status.FR set?
bgez t0, 1f # no: skip setting upper 32b
#endif
jr ra
END(_init_fpu)
+
+ .set pop /* SET_HARDFLOAT */
.set noreorder
.set mips2
+ .set push
+ SET_HARDFLOAT
+
/* Save floating point context */
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
1: jr ra
nop
END(_restore_fp_context)
+
+ .set pop /* SET_HARDFLOAT */
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 5315 */
.size sys_call_table,.-sys_call_table
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf
.size sysn32_call_table,.-sysn32_call_table
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
.size sys32_call_table,.-sys32_call_table
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
/* Tell bootmem about cma reserved memblock section */
for_each_memblock(reserved, reg)
- reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+ if (reg->size != 0)
+ reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
}
static void __init resource_init(void)
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
- if ((entryhi & 0xffffe000) != 0x80000000
+ if ((entryhi & 0xfffff000) != 0x80000000
&& (entryhi & 0xfc0) == asid) {
/*
* Only print entries in use
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
- (entryhi & 0xffffe000),
+ (entryhi & 0xfffff000),
entryhi & 0xfc0,
entrylo0 & PAGE_MASK,
(entrylo0 & (1 << 11)) ? 1 : 0,
.else
EX(lbe, t0, (v0), .Lfault\@)
.endif
- PTR_ADDIU v0, 1
+ .set noreorder
bnez t0, 1b
-1: PTR_SUBU v0, a0
+1: PTR_ADDIU v0, 1
+ .set reorder
+ PTR_SUBU v0, a0
jr ra
END(__strnlen_\func\()_asm)
if (insn.i_format.rs == bc_op) {
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
msg.data = 0xc00 | msixvec;
ret = irq_set_msi_desc(xirq, desc);
- if (ret < 0) {
- destroy_irq(xirq);
+ if (ret < 0)
return ret;
- }
write_msi_msg(xirq, &msg);
return 0;
#define CPU_UNKNOWN (~((u32)0))
/* Utility macros */
-#define SKIP_TO_NEXT_CPU(reg_entry) \
-({ \
- while (reg_entry->reg_id != REG_ID("CPUEND")) \
- reg_entry++; \
- reg_entry++; \
+#define SKIP_TO_NEXT_CPU(reg_entry) \
+({ \
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) \
+ reg_entry++; \
+ reg_entry++; \
})
/* Kernel Dump section info */
struct fadump_section {
- u32 request_flag;
- u16 source_data_type;
- u16 error_flags;
- u64 source_address;
- u64 source_len;
- u64 bytes_dumped;
- u64 destination_address;
+ __be32 request_flag;
+ __be16 source_data_type;
+ __be16 error_flags;
+ __be64 source_address;
+ __be64 source_len;
+ __be64 bytes_dumped;
+ __be64 destination_address;
};
/* ibm,configure-kernel-dump header. */
struct fadump_section_header {
- u32 dump_format_version;
- u16 dump_num_sections;
- u16 dump_status_flag;
- u32 offset_first_dump_section;
+ __be32 dump_format_version;
+ __be16 dump_num_sections;
+ __be16 dump_status_flag;
+ __be32 offset_first_dump_section;
/* Fields for disk dump option. */
- u32 dd_block_size;
- u64 dd_block_offset;
- u64 dd_num_blocks;
- u32 dd_offset_disk_path;
+ __be32 dd_block_size;
+ __be64 dd_block_offset;
+ __be64 dd_num_blocks;
+ __be32 dd_offset_disk_path;
/* Maximum time allowed to prevent an automatic dump-reboot. */
- u32 max_time_auto;
+ __be32 max_time_auto;
};
/*
/* Register save area header. */
struct fadump_reg_save_area_header {
- u64 magic_number;
- u32 version;
- u32 num_cpu_offset;
+ __be64 magic_number;
+ __be32 version;
+ __be32 num_cpu_offset;
};
/* Register entry. */
struct fadump_reg_entry {
- u64 reg_id;
- u64 reg_value;
+ __be64 reg_id;
+ __be64 reg_value;
};
/* fadump crash info structure */
3:
#endif
bl save_nvgprs
+ /*
+ * Use a non volatile GPR to save and restore our thread_info flags
+ * across the call to restore_interrupts.
+ */
+ mr r30,r4
bl restore_interrupts
+ mr r4,r30
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_notify_resume
b ret_from_except
const __be32 *sections;
int i, num_sections;
int size;
- const int *token;
+ const __be32 *token;
if (depth != 1 || strcmp(uname, "rtas") != 0)
return 0;
return 1;
fw_dump.fadump_supported = 1;
- fw_dump.ibm_configure_kernel_dump = *token;
+ fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token);
/*
* The 'ibm,kernel-dump' rtas node is present only if there is
memset(fdm, 0, sizeof(struct fadump_mem_struct));
addr = addr & PAGE_MASK;
- fdm->header.dump_format_version = 0x00000001;
- fdm->header.dump_num_sections = 3;
+ fdm->header.dump_format_version = cpu_to_be32(0x00000001);
+ fdm->header.dump_num_sections = cpu_to_be16(3);
fdm->header.dump_status_flag = 0;
fdm->header.offset_first_dump_section =
- (u32)offsetof(struct fadump_mem_struct, cpu_state_data);
+ cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data));
/*
* Fields for disk dump option.
/* Kernel dump sections */
/* cpu state data section. */
- fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG;
- fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA;
+ fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA);
fdm->cpu_state_data.source_address = 0;
- fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size;
- fdm->cpu_state_data.destination_address = addr;
+ fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size);
+ fdm->cpu_state_data.destination_address = cpu_to_be64(addr);
addr += fw_dump.cpu_state_data_size;
/* hpte region section */
- fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION;
+ fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION);
fdm->hpte_region.source_address = 0;
- fdm->hpte_region.source_len = fw_dump.hpte_region_size;
- fdm->hpte_region.destination_address = addr;
+ fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size);
+ fdm->hpte_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.hpte_region_size;
/* RMA region section */
- fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION;
- fdm->rmr_region.source_address = RMA_START;
- fdm->rmr_region.source_len = fw_dump.boot_memory_size;
- fdm->rmr_region.destination_address = addr;
+ fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION);
+ fdm->rmr_region.source_address = cpu_to_be64(RMA_START);
+ fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size);
+ fdm->rmr_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.boot_memory_size;
return addr;
* first kernel.
*/
if (fdm_active)
- fw_dump.boot_memory_size = fdm_active->rmr_region.source_len;
+ fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
else
fw_dump.boot_memory_size = fadump_calculate_reserve_size();
(unsigned long)(base >> 20));
fw_dump.fadumphdr_addr =
- fdm_active->rmr_region.destination_address +
- fdm_active->rmr_region.source_len;
+ be64_to_cpu(fdm_active->rmr_region.destination_address) +
+ be64_to_cpu(fdm_active->rmr_region.source_len);
pr_debug("fadumphdr_addr = %p\n",
(void *) fw_dump.fadumphdr_addr);
} else {
{
memset(regs, 0, sizeof(struct pt_regs));
- while (reg_entry->reg_id != REG_ID("CPUEND")) {
- fadump_set_regval(regs, reg_entry->reg_id,
- reg_entry->reg_value);
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) {
+ fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id),
+ be64_to_cpu(reg_entry->reg_value));
reg_entry++;
}
reg_entry++;
if (!fdm->cpu_state_data.bytes_dumped)
return -EINVAL;
- addr = fdm->cpu_state_data.destination_address;
+ addr = be64_to_cpu(fdm->cpu_state_data.destination_address);
vaddr = __va(addr);
reg_header = vaddr;
- if (reg_header->magic_number != REGSAVE_AREA_MAGIC) {
+ if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) {
printk(KERN_ERR "Unable to read register save area.\n");
return -ENOENT;
}
pr_debug("--------CPU State Data------------\n");
- pr_debug("Magic Number: %llx\n", reg_header->magic_number);
- pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset);
+ pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number));
+ pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset));
- vaddr += reg_header->num_cpu_offset;
- num_cpus = *((u32 *)(vaddr));
+ vaddr += be32_to_cpu(reg_header->num_cpu_offset);
+ num_cpus = be32_to_cpu(*((__be32 *)(vaddr)));
pr_debug("NumCpus : %u\n", num_cpus);
vaddr += sizeof(u32);
reg_entry = (struct fadump_reg_entry *)vaddr;
fdh = __va(fw_dump.fadumphdr_addr);
for (i = 0; i < num_cpus; i++) {
- if (reg_entry->reg_id != REG_ID("CPUSTRT")) {
+ if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) {
printk(KERN_ERR "Unable to read CPU state data\n");
rc = -ENOENT;
goto error_out;
}
/* Lower 4 bytes of reg_value contains logical cpu id */
- cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
+ cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
SKIP_TO_NEXT_CPU(reg_entry);
continue;
return -EINVAL;
/* Check if the dump data is valid. */
- if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) ||
+ if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) ||
(fdm_active->cpu_state_data.error_flags != 0) ||
(fdm_active->rmr_region.error_flags != 0)) {
printk(KERN_ERR "Dump taken by platform is not valid\n");
static inline unsigned long fadump_relocate(unsigned long paddr)
{
if (paddr > RMA_START && paddr < fw_dump.boot_memory_size)
- return fdm.rmr_region.destination_address + paddr;
+ return be64_to_cpu(fdm.rmr_region.destination_address) + paddr;
else
return paddr;
}
* to the specified destination_address. Hence set
* the correct offset.
*/
- phdr->p_offset = fdm.rmr_region.destination_address;
+ phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address);
}
phdr->p_paddr = mbase;
fadump_setup_crash_memory_ranges();
- addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len;
+ addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
/* Initialize fadump crash info header. */
addr = init_fadump_header(addr);
vaddr = __va(addr);
/* Invalidate the registration only if dump is active. */
if (fw_dump.dump_active) {
init_fadump_mem_struct(&fdm,
- fdm_active->cpu_state_data.destination_address);
+ be64_to_cpu(fdm_active->cpu_state_data.destination_address));
fadump_invalidate_dump(&fdm);
}
}
return;
}
- destination_address = fdm_active->cpu_state_data.destination_address;
+ destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
fadump_cleanup();
mutex_unlock(&fadump_mutex);
seq_printf(m,
"CPU : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->cpu_state_data.destination_address,
- fdm_ptr->cpu_state_data.destination_address +
- fdm_ptr->cpu_state_data.source_len - 1,
- fdm_ptr->cpu_state_data.source_len,
- fdm_ptr->cpu_state_data.bytes_dumped);
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address),
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) +
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len),
+ be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped));
seq_printf(m,
"HPTE: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->hpte_region.destination_address,
- fdm_ptr->hpte_region.destination_address +
- fdm_ptr->hpte_region.source_len - 1,
- fdm_ptr->hpte_region.source_len,
- fdm_ptr->hpte_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address),
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address) +
+ be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->hpte_region.source_len),
+ be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped));
seq_printf(m,
"DUMP: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->rmr_region.destination_address,
- fdm_ptr->rmr_region.destination_address +
- fdm_ptr->rmr_region.source_len - 1,
- fdm_ptr->rmr_region.source_len,
- fdm_ptr->rmr_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address),
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address) +
+ be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->rmr_region.source_len),
+ be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped));
if (!fdm_active ||
(fw_dump.reserve_dump_area_start ==
- fdm_ptr->cpu_state_data.destination_address))
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address)))
goto out;
/* Dump is active. Show reserved memory region. */
" : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
(unsigned long long)fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address - 1,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start);
out:
if (fdm_active)
/*
* Check for command-line options that affect what MMU_init will do.
*/
-void MMU_setup(void)
+void __init MMU_setup(void)
{
/* Check for nobats option (used in mapin_ram). */
if (strstr(boot_command_line, "nobats")) {
return 0;
}
-static int h_24x7_event_idx(struct perf_event *event)
-{
- return 0;
-}
-
static struct pmu h_24x7_pmu = {
.task_ctx_nr = perf_invalid_context,
.start = h_24x7_event_start,
.stop = h_24x7_event_stop,
.read = h_24x7_event_update,
- .event_idx = h_24x7_event_idx,
};
static int hv_24x7_init(void)
return 0;
}
-static int h_gpci_event_idx(struct perf_event *event)
-{
- return 0;
-}
-
static struct pmu h_gpci_pmu = {
.task_ctx_nr = perf_invalid_context,
.start = h_gpci_event_start,
.stop = h_gpci_event_stop,
.read = h_gpci_event_update,
- .event_idx = h_gpci_event_idx,
};
static int hv_gpci_init(void)
&data, len);
if (rc)
return -ENXIO;
+
+ /*
+ * Now there is some trickery with the data returned by OPAL
+ * as it's the desired data right justified in a 32-bit BE
+ * word.
+ *
+ * This is a very bad interface and I'm to blame for it :-(
+ *
+ * So we can't just apply a 32-bit swap to what comes from OPAL,
+ * because user space expects the *bytes* to be in their proper
+ * respective positions (ie, LPC position).
+ *
+ * So what we really want to do here is to shift data right
+ * appropriately on a LE kernel.
+ *
+ * IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that
+ * order, we have in memory written to by OPAL at the "data"
+ * pointer:
+ *
+ * Bytes: OPAL "data" LE "data"
+ * 32-bit: B0 B1 B2 B3 B0B1B2B3 B3B2B1B0
+ * 16-bit: B0 B1 0000B0B1 B1B00000
+ * 8-bit: B0 000000B0 B0000000
+ *
+ * So a BE kernel will have the leftmost of the above in the MSB
+ * and rightmost in the LSB and can just then "cast" the u32 "data"
+ * down to the appropriate quantity and write it.
+ *
+ * However, an LE kernel can't. It doesn't need to swap because a
+ * load from data followed by a store to user are going to preserve
+ * the byte ordering which is the wire byte order which is what the
+ * user wants, but in order to "crop" to the right size, we need to
+ * shift right first.
+ */
switch(len) {
case 4:
rc = __put_user((u32)data, (u32 __user *)ubuf);
break;
case 2:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 16;
+#endif
rc = __put_user((u16)data, (u16 __user *)ubuf);
break;
default:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 24;
+#endif
rc = __put_user((u8)data, (u8 __user *)ubuf);
break;
}
else if (todo > 1 && (pos & 1) == 0)
len = 2;
}
+
+ /*
+ * Similarly to the read case, we have some trickery here but
+ * it's different to handle. We need to pass the value to OPAL in
+ * a register whose layout depends on the access size. We want
+ * to reproduce the memory layout of the user, however we aren't
+ * doing a load from user and a store to another memory location
+ * which would achieve that. Here we pass the value to OPAL via
+ * a register which is expected to contain the "BE" interpretation
+ * of the byte sequence. IE: for a 32-bit access, byte 0 should be
+ * in the MSB. So here we *do* need to byteswap on LE.
+ *
+ * User bytes: LE "data" OPAL "data"
+ * 32-bit: B0 B1 B2 B3 B3B2B1B0 B0B1B2B3
+ * 16-bit: B0 B1 0000B1B0 0000B0B1
+ * 8-bit: B0 000000B0 000000B0
+ */
switch(len) {
case 4:
rc = __get_user(data, (u32 __user *)ubuf);
+ data = cpu_to_be32(data);
break;
case 2:
rc = __get_user(data, (u16 __user *)ubuf);
+ data = cpu_to_be16(data);
break;
default:
rc = __get_user(data, (u8 __user *)ubuf);
BUG_ON(get_cpu_current_state(cpu)
!= CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_up(cpu);
+ rc = device_online(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_down(cpu);
+ rc = device_offline(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
+#include <asm/fadump.h>
#include "pseries.h"
}
#ifdef __LITTLE_ENDIAN__
- /* Reset exceptions to big endian */
- if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
+ /*
+ * Reset exceptions to big endian.
+ *
+ * FIXME this is a hack for kexec, we need to reset the exception
+ * endian before starting the new kernel and this is a convenient place
+ * to do it.
+ *
+ * This is also called on boot when a fadump happens. In that case we
+ * must not change the exception endian mode.
+ */
+ if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) {
long rc;
rc = pseries_big_endian_exceptions();
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_PREEMPT_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_STRING_HELPERS=y
+CONFIG_TEST_KSTRTOX=y
CONFIG_DMA_API_DEBUG=y
+CONFIG_TEST_BPF=m
# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SECCOMP is not set
-# CONFIG_IUCV is not set
CONFIG_NET=y
+# CONFIG_IUCV is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_ENCLOSURE=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_ZFCP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
# CONFIG_STRICT_DEVMEM is not set
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
# CONFIG_PFAULT is not set
# CONFIG_S390_HYPFS_FS is not set
# CONFIG_VIRTUALIZATION is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=y
CONFIG_NETDEVICES=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
{
struct ftrace_graph_ent trace;
+ if (unlikely(ftrace_graph_is_dead()))
+ goto out;
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
goto out;
ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
perf_pmu_enable(event->pmu);
}
-static int cpumsf_pmu_event_idx(struct perf_event *event)
-{
- return event->hw.idx;
-}
-
CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF);
CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG);
.stop = cpumsf_pmu_stop,
.read = cpumsf_pmu_read,
- .event_idx = cpumsf_pmu_event_idx,
.attr_groups = cpumsf_pmu_attr_groups,
};
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,21f-0b(%r5) /* get &_vdso_data */
chi %r2,__CLOCK_REALTIME_COARSE
1: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
8: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
11: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 11b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
17: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* Fallback to system call */
19: lhi %r1,__NR_clock_gettime
svc 0
+ ahi %r15,16
br %r14
20: .long 1000000000
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,13f-0b(%r5) /* get &_vdso_data */
1: ltr %r3,%r3 /* check if tz is NULL */
l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
- st %r0,24(%r15)
+ st %r0,0(%r15)
l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
a %r0,__VDSO_TK_MULT(%r5)
-4: al %r0,24(%r15)
+4: al %r0,0(%r15)
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,5f
ahi %r0,1
-5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
+5: mvc 0(4,%r15),__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
srdl %r0,0(%r4) /* >> tk->shift */
- l %r4,24(%r15) /* get tv_sec from stack */
+ l %r4,0(%r15) /* get tv_sec from stack */
basr %r5,0
6: ltr %r0,%r0
jnz 7f
9: srl %r0,6
st %r0,4(%r2) /* store tv->tv_usec */
10: slr %r2,%r2
+ ahi %r15,16
br %r14
11: .long 1000000000
12: .long 274877907
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
cghi %r2,__CLOCK_REALTIME_COARSE
je 4f
0: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r0,__VDSO_WTOM_SEC(%r5)
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_WTOM_NSEC(%r5)
2: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
5: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 5b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
7: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_THREAD_CPUTIME_ID for this thread */
slgr %r4,%r0 /* r4 = tv_nsec */
stg %r4,8(%r3)
lghi %r2,0
+ aghi %r15,16
br %r14
/* Fallback to system call */
12: lghi %r1,__NR_clock_gettime
svc 0
+ aghi %r15,16
br %r14
13: .quad 1000000000
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
0: ltgr %r3,%r3 /* check if tz is NULL */
je 1f
lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
- lg %r1,49(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
srlg %r0,%r0,6
stg %r0,8(%r2) /* store tv->tv_usec */
4: lghi %r2,0
+ aghi %r15,16
br %r14
5: .quad 1000000000
.long 274877907
clock = S390_lowcore.last_update_clock;
asm volatile(
" stpt %0\n" /* Store current cpu timer value */
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+ " stckf %1" /* Store current tod clock value */
+#else
" stck %1" /* Store current tod clock value */
+#endif
: "=m" (S390_lowcore.last_update_timer),
"=m" (S390_lowcore.last_update_clock));
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
};
static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffffe80, 0x100),
+ DEFINE_RES_MEM(0xfffffe80, 0x10),
DEFINE_RES_IRQ(evt2irq(0x4e0)),
};
};
static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4000150, 0x100),
+ DEFINE_RES_MEM(0xa4000150, 0x10),
DEFINE_RES_IRQ(evt2irq(0x900)),
};
};
static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xa4000140, 0x100),
+ DEFINE_RES_MEM(0xa4000140, 0x10),
DEFINE_RES_IRQ(evt2irq(0x880)),
};
#define __NR_seccomp 346
#define __NR_getrandom 347
#define __NR_memfd_create 348
+#define __NR_bpf 349
-#define NR_syscalls 349
+#define NR_syscalls 350
/* Bitmask values returned from kern_features system call. */
#define KERN_FEATURE_MIXED_MODE_STACK 0x00000001
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
/*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
-/*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create
+/*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
/*330*/ .word compat_sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
- .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create
+ .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
#endif /* CONFIG_COMPAT */
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
- .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create
+ .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
def_bool y
depends on KPROBES || PERF_EVENTS || UPROBES
+config PERF_EVENTS_INTEL_UNCORE
+ def_bool y
+ depends on PERF_EVENTS && SUP_SUP_INTEL && PCI
+
config OUTPUT_FORMAT
string
default "elf32-i386" if X86_32
* ourselves. To save a few cycles, we can check whether
* NT was set instead of doing an unconditional popfq.
*/
- testl $X86_EFLAGS_NT,EFLAGS(%rsp) /* saved EFLAGS match cpu */
+ testl $X86_EFLAGS_NT,EFLAGS-ARGOFFSET(%rsp)
jnz sysenter_fix_flags
sysenter_flags_fixed:
# ifdef CONFIG_CONTEXT_TRACKING
extern asmlinkage void ___preempt_schedule_context(void);
# define __preempt_schedule_context() asm ("call ___preempt_schedule_context")
+ extern asmlinkage void preempt_schedule_context(void);
# endif
#endif
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
+ return mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC);
trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)
{
- int irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC | IOAPIC_MAP_CHECK);
+ int irq;
- if (irq >= 0) {
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+ *irqp = gsi;
+ } else {
+ irq = mp_map_gsi_to_irq(gsi,
+ IOAPIC_MAP_ALLOC | IOAPIC_MAP_CHECK);
+ if (irq < 0)
+ return -1;
*irqp = irq;
- return 0;
}
-
- return -1;
+ return 0;
}
EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
- /* APB timer irqs are set up as mp_irqs, timer is edge type */
- __irq_set_handler(adev->irq, handle_edge_irq, 0, "edge");
}
/* Should be called with per cpu */
unsigned int value, queued;
int i, j, acked = 0;
unsigned long long tsc = 0, ntsc;
- long long max_loops = cpu_khz;
+ long long max_loops = cpu_khz ? cpu_khz : 1000000;
if (cpu_has_tsc)
rdtscll(tsc);
break;
}
if (queued) {
- if (cpu_has_tsc) {
+ if (cpu_has_tsc && cpu_khz) {
rdtscll(ntsc);
max_loops = (cpu_khz << 10) - (ntsc - tsc);
} else
endif
obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_p6.o perf_event_knc.o perf_event_p4.o
obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_lbr.o perf_event_intel_ds.o perf_event_intel.o
-obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_uncore.o perf_event_intel_uncore_snb.o
-obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_uncore_snbep.o perf_event_intel_uncore_nhmex.o
obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_rapl.o
+
+obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE) += perf_event_intel_uncore.o \
+ perf_event_intel_uncore_snb.o \
+ perf_event_intel_uncore_snbep.o \
+ perf_event_intel_uncore_nhmex.o
endif
{
#ifdef CONFIG_X86_F00F_BUG
/*
- * All current models of Pentium and Pentium with MMX technology CPUs
+ * All models of Pentium and Pentium with MMX technology CPUs
* have the F0 0F bug, which lets nonprivileged users lock up the
* system. Announce that the fault handler will be checking for it.
+ * The Quark is also family 5, but does not have the same bug.
*/
clear_cpu_bug(c, X86_BUG_F00F);
- if (!paravirt_enabled() && c->x86 == 5) {
+ if (!paravirt_enabled() && c->x86 == 5 && c->x86_model < 9) {
static int f00f_workaround_enabled;
set_cpu_bug(c, X86_BUG_F00F);
msr_fail:
printk(KERN_CONT "Broken PMU hardware detected, using software events only.\n");
- printk(boot_cpu_has(X86_FEATURE_HYPERVISOR) ? KERN_INFO : KERN_ERR
- "Failed to access perfctr msr (MSR %x is %Lx)\n", reg, val_new);
+ printk("%sFailed to access perfctr msr (MSR %x is %Lx)\n",
+ boot_cpu_has(X86_FEATURE_HYPERVISOR) ? KERN_INFO : KERN_ERR,
+ reg, val_new);
return false;
}
if (event->attr.type == PERF_TYPE_RAW)
event->hw.config |= event->attr.config & X86_RAW_EVENT_MASK;
- if (event->attr.sample_period && x86_pmu.limit_period) {
- if (x86_pmu.limit_period(event, event->attr.sample_period) >
- event->attr.sample_period)
- return -EINVAL;
- }
-
return x86_setup_perfctr(event);
}
if (left > x86_pmu.max_period)
left = x86_pmu.max_period;
- if (x86_pmu.limit_period)
- left = x86_pmu.limit_period(event, left);
-
per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
/*
struct x86_pmu_quirk *quirks;
int perfctr_second_write;
bool late_ack;
- unsigned (*limit_period)(struct perf_event *event, unsigned l);
/*
* sysfs attrs
EVENT_CONSTRAINT_END
};
-static struct event_constraint intel_bdw_event_constraints[] = {
- FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
- FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
- FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
- INTEL_UEVENT_CONSTRAINT(0x148, 0x4), /* L1D_PEND_MISS.PENDING */
- INTEL_EVENT_CONSTRAINT(0xa3, 0x4), /* CYCLE_ACTIVITY.* */
- EVENT_CONSTRAINT_END
-};
-
static u64 intel_pmu_event_map(int hw_event)
{
return intel_perfmon_event_map[hw_event];
};
-static __initconst const u64 hsw_hw_cache_event_ids
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D ) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
- [ C(RESULT_MISS) ] = 0x151, /* L1D.REPLACEMENT */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
- [ C(RESULT_MISS) ] = 0x0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(L1I ) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x280, /* ICACHE.MISSES */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(LL ) ] = {
- [ C(OP_READ) ] = {
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD */
- [ C(RESULT_ACCESS) ] = 0x1b7,
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD|SUPPLIER_NONE|
- L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x1b7,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE:ALL_RFO */
- /* OFFCORE_RESPONSE:ALL_RFO|SUPPLIER_NONE|L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x1b7,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
- [ C(RESULT_MISS) ] = 0x108, /* DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
- [ C(RESULT_MISS) ] = 0x149, /* DTLB_STORE_MISSES.MISS_CAUSES_A_WALK */
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x6085, /* ITLB_MISSES.STLB_HIT */
- [ C(RESULT_MISS) ] = 0x185, /* ITLB_MISSES.MISS_CAUSES_A_WALK */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
- [ C(BPU ) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0xc4, /* BR_INST_RETIRED.ALL_BRANCHES */
- [ C(RESULT_MISS) ] = 0xc5, /* BR_MISP_RETIRED.ALL_BRANCHES */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static __initconst const u64 hsw_hw_cache_extra_regs
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(LL ) ] = {
- [ C(OP_READ) ] = {
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD */
- [ C(RESULT_ACCESS) ] = 0x2d5,
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD|SUPPLIER_NONE|
- L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x3fbc0202d5ull,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x122, /* OFFCORE_RESPONSE:ALL_RFO */
- /* OFFCORE_RESPONSE:ALL_RFO|SUPPLIER_NONE|L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x3fbc020122ull,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
-};
-
static __initconst const u64 westmere_hw_cache_event_ids
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
return c;
}
-/*
- * Broadwell:
- * The INST_RETIRED.ALL period always needs to have lowest
- * 6bits cleared (BDM57). It shall not use a period smaller
- * than 100 (BDM11). We combine the two to enforce
- * a min-period of 128.
- */
-static unsigned bdw_limit_period(struct perf_event *event, unsigned left)
-{
- if ((event->hw.config & INTEL_ARCH_EVENT_MASK) ==
- X86_CONFIG(.event=0xc0, .umask=0x01)) {
- if (left < 128)
- left = 128;
- left &= ~0x3fu;
- }
- return left;
-}
-
PMU_FORMAT_ATTR(event, "config:0-7" );
PMU_FORMAT_ATTR(umask, "config:8-15" );
PMU_FORMAT_ATTR(edge, "config:18" );
case 69: /* 22nm Haswell ULT */
case 70: /* 22nm Haswell + GT3e (Intel Iris Pro graphics) */
x86_pmu.late_ack = true;
- memcpy(hw_cache_event_ids, hsw_hw_cache_event_ids, sizeof(hw_cache_event_ids));
- memcpy(hw_cache_extra_regs, hsw_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
+ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids));
+ memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
intel_pmu_lbr_init_snb();
pr_cont("Haswell events, ");
break;
- case 61: /* 14nm Broadwell Core-M */
- x86_pmu.late_ack = true;
- memcpy(hw_cache_event_ids, hsw_hw_cache_event_ids, sizeof(hw_cache_event_ids));
- memcpy(hw_cache_extra_regs, hsw_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
-
- intel_pmu_lbr_init_snb();
-
- x86_pmu.event_constraints = intel_bdw_event_constraints;
- x86_pmu.pebs_constraints = intel_hsw_pebs_event_constraints;
- x86_pmu.extra_regs = intel_snbep_extra_regs;
- x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
- /* all extra regs are per-cpu when HT is on */
- x86_pmu.er_flags |= ERF_HAS_RSP_1;
- x86_pmu.er_flags |= ERF_NO_HT_SHARING;
-
- x86_pmu.hw_config = hsw_hw_config;
- x86_pmu.get_event_constraints = hsw_get_event_constraints;
- x86_pmu.cpu_events = hsw_events_attrs;
- x86_pmu.limit_period = bdw_limit_period;
- pr_cont("Broadwell events, ");
- break;
-
default:
switch (x86_pmu.version) {
case 1:
sysenter_audit:
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
- addl $4,%esp
- CFI_ADJUST_CFA_OFFSET -4
- movl %esi,4(%esp) /* 5th arg: 4th syscall arg */
- movl %edx,(%esp) /* 4th arg: 3rd syscall arg */
- /* %ecx already in %ecx 3rd arg: 2nd syscall arg */
- movl %ebx,%edx /* 2nd arg: 1st syscall arg */
- /* %eax already in %eax 1st arg: syscall number */
+ /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
+ movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */
+ /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
+ pushl_cfi PT_ESI(%esp) /* a3: 5th arg */
+ pushl_cfi PT_EDX+4(%esp) /* a2: 4th arg */
call __audit_syscall_entry
- pushl_cfi %ebx
+ popl_cfi %ecx /* get that remapped edx off the stack */
+ popl_cfi %ecx /* get that remapped esi off the stack */
movl PT_EAX(%esp),%eax /* reload syscall number */
jmp sysenter_do_call
{
disable_irq_nosync(irq);
io_apic_irqs &= ~(1<<irq);
- irq_set_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
- i8259A_chip.name);
+ irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq);
enable_irq(irq);
}
void __init init_ISA_irqs(void)
{
struct irq_chip *chip = legacy_pic->chip;
- const char *name = chip->name;
int i;
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
legacy_pic->init(0);
for (i = 0; i < nr_legacy_irqs(); i++)
- irq_set_chip_and_handler_name(i, chip, handle_level_irq, name);
+ irq_set_chip_and_handler(i, chip, handle_level_irq);
}
void __init init_IRQ(void)
setup_real_mode();
memblock_set_current_limit(get_max_mapped());
- dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT);
/*
* NOTE: On x86-32, only from this point on, fixmaps are ready for use.
early_acpi_boot_init();
initmem_init();
+ dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT);
/*
* Reserve memory for crash kernel after SRAT is parsed so that it
DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
EXPORT_PER_CPU_SYMBOL(cpu_info);
-static DEFINE_PER_CPU(struct completion, die_complete);
-
atomic_t init_deasserted;
/*
fixup_irqs();
}
+static DEFINE_PER_CPU(struct completion, die_complete);
+
int native_cpu_disable(void)
{
int ret;
x86_init.timers.tsc_pre_init();
- if (!cpu_has_tsc)
+ if (!cpu_has_tsc) {
+ setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
return;
+ }
tsc_khz = x86_platform.calibrate_tsc();
cpu_khz = tsc_khz;
if (!tsc_khz) {
mark_tsc_unstable("could not calculate TSC khz");
+ setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
return;
}
case 4:
ctxt->_eip = (u32)dst;
break;
+#ifdef CONFIG_X86_64
case 8:
if ((cs_l && is_noncanonical_address(dst)) ||
- (!cs_l && (dst & ~(u32)-1)))
+ (!cs_l && (dst >> 32) != 0))
return emulate_gp(ctxt, 0);
ctxt->_eip = dst;
break;
+#endif
default:
WARN(1, "unsupported eip assignment size\n");
}
static int __linearize(struct x86_emulate_ctxt *ctxt,
struct segmented_address addr,
- unsigned size, bool write, bool fetch,
+ unsigned *max_size, unsigned size,
+ bool write, bool fetch,
ulong *linear)
{
struct desc_struct desc;
unsigned cpl;
la = seg_base(ctxt, addr.seg) + addr.ea;
+ *max_size = 0;
switch (ctxt->mode) {
case X86EMUL_MODE_PROT64:
if (((signed long)la << 16) >> 16 != la)
return emulate_gp(ctxt, 0);
+
+ *max_size = min_t(u64, ~0u, (1ull << 48) - la);
+ if (size > *max_size)
+ goto bad;
break;
default:
usable = ctxt->ops->get_segment(ctxt, &sel, &desc, NULL,
if ((ctxt->mode == X86EMUL_MODE_REAL) && !fetch &&
(ctxt->d & NoBigReal)) {
/* la is between zero and 0xffff */
- if (la > 0xffff || (u32)(la + size - 1) > 0xffff)
+ if (la > 0xffff)
goto bad;
+ *max_size = 0x10000 - la;
} else if ((desc.type & 8) || !(desc.type & 4)) {
/* expand-up segment */
- if (addr.ea > lim || (u32)(addr.ea + size - 1) > lim)
+ if (addr.ea > lim)
goto bad;
+ *max_size = min_t(u64, ~0u, (u64)lim + 1 - addr.ea);
} else {
/* expand-down segment */
- if (addr.ea <= lim || (u32)(addr.ea + size - 1) <= lim)
+ if (addr.ea <= lim)
goto bad;
lim = desc.d ? 0xffffffff : 0xffff;
- if (addr.ea > lim || (u32)(addr.ea + size - 1) > lim)
+ if (addr.ea > lim)
goto bad;
+ *max_size = min_t(u64, ~0u, (u64)lim + 1 - addr.ea);
}
+ if (size > *max_size)
+ goto bad;
cpl = ctxt->ops->cpl(ctxt);
if (!(desc.type & 8)) {
/* data segment */
return X86EMUL_CONTINUE;
bad:
if (addr.seg == VCPU_SREG_SS)
- return emulate_ss(ctxt, sel);
+ return emulate_ss(ctxt, 0);
else
- return emulate_gp(ctxt, sel);
+ return emulate_gp(ctxt, 0);
}
static int linearize(struct x86_emulate_ctxt *ctxt,
unsigned size, bool write,
ulong *linear)
{
- return __linearize(ctxt, addr, size, write, false, linear);
+ unsigned max_size;
+ return __linearize(ctxt, addr, &max_size, size, write, false, linear);
}
static int __do_insn_fetch_bytes(struct x86_emulate_ctxt *ctxt, int op_size)
{
int rc;
- unsigned size;
+ unsigned size, max_size;
unsigned long linear;
int cur_size = ctxt->fetch.end - ctxt->fetch.data;
struct segmented_address addr = { .seg = VCPU_SREG_CS,
.ea = ctxt->eip + cur_size };
- size = 15UL ^ cur_size;
- rc = __linearize(ctxt, addr, size, false, true, &linear);
+ /*
+ * We do not know exactly how many bytes will be needed, and
+ * __linearize is expensive, so fetch as much as possible. We
+ * just have to avoid going beyond the 15 byte limit, the end
+ * of the segment, or the end of the page.
+ *
+ * __linearize is called with size 0 so that it does not do any
+ * boundary check itself. Instead, we use max_size to check
+ * against op_size.
+ */
+ rc = __linearize(ctxt, addr, &max_size, 0, false, true, &linear);
if (unlikely(rc != X86EMUL_CONTINUE))
return rc;
+ size = min_t(unsigned, 15UL ^ cur_size, max_size);
size = min_t(unsigned, size, PAGE_SIZE - offset_in_page(linear));
/*
* still, we must have hit the 15-byte boundary.
*/
if (unlikely(size < op_size))
- return X86EMUL_UNHANDLEABLE;
+ return emulate_gp(ctxt, 0);
+
rc = ctxt->ops->fetch(ctxt, linear, ctxt->fetch.end,
size, &ctxt->exception);
if (unlikely(rc != X86EMUL_CONTINUE))
rc = assign_eip_far(ctxt, ctxt->src.val, new_desc.l);
if (rc != X86EMUL_CONTINUE) {
- WARN_ON(!ctxt->mode != X86EMUL_MODE_PROT64);
+ WARN_ON(ctxt->mode != X86EMUL_MODE_PROT64);
/* assigning eip failed; restore the old cs */
ops->set_segment(ctxt, old_sel, &old_desc, 0, VCPU_SREG_CS);
return rc;
return rc;
rc = assign_eip_far(ctxt, eip, new_desc.l);
if (rc != X86EMUL_CONTINUE) {
- WARN_ON(!ctxt->mode != X86EMUL_MODE_PROT64);
+ WARN_ON(ctxt->mode != X86EMUL_MODE_PROT64);
ops->set_segment(ctxt, old_cs, &old_desc, 0, VCPU_SREG_CS);
}
return rc;
fetch_register_operand(op);
break;
case OpCL:
+ op->type = OP_IMM;
op->bytes = 1;
op->val = reg_read(ctxt, VCPU_REGS_RCX) & 0xff;
break;
rc = decode_imm(ctxt, op, 1, true);
break;
case OpOne:
+ op->type = OP_IMM;
op->bytes = 1;
op->val = 1;
break;
ctxt->memop.bytes = ctxt->op_bytes + 2;
goto mem_common;
case OpES:
+ op->type = OP_IMM;
op->val = VCPU_SREG_ES;
break;
case OpCS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_CS;
break;
case OpSS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_SS;
break;
case OpDS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_DS;
break;
case OpFS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_FS;
break;
case OpGS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_GS;
break;
case OpImplicit:
vmcs_write32(TPR_THRESHOLD, 0);
}
- kvm_vcpu_reload_apic_access_page(vcpu);
+ kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
if (vmx_vm_has_apicv(vcpu->kvm))
memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
const unsigned long *fields = shadow_read_write_fields;
const int num_fields = max_shadow_read_write_fields;
+ preempt_disable();
+
vmcs_load(shadow_vmcs);
for (i = 0; i < num_fields; i++) {
vmcs_clear(shadow_vmcs);
vmcs_load(vmx->loaded_vmcs->vmcs);
+
+ preempt_enable();
}
static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx)
psize = page_level_size(level);
pmask = page_level_mask(level);
offset = virt_addr & ~pmask;
- phys_addr = pte_pfn(*pte) << PAGE_SHIFT;
+ phys_addr = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
return (phys_addr | offset);
}
EXPORT_SYMBOL_GPL(slow_virt_to_phys);
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
mp_save_irq(&mp_irq);
+ mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
}
return 0;
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
mp_save_irq(&mp_irq);
+ mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
}
return 0;
}
config XTENSA_PLATFORM_XTFPGA
bool "XTFPGA"
+ select ETHOC if ETHERNET
select SERIAL_CONSOLE
- select ETHOC
select XTENSA_CALIBRATE_CCOUNT
help
XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
config BLK_DEV_SIMDISK
tristate "Host file-based simulated block device support"
default n
- depends on XTENSA_PLATFORM_ISS
+ depends on XTENSA_PLATFORM_ISS && BLOCK
help
Create block devices that map to files in the host file system.
Device binding to host file may be changed at runtime via proc
--- /dev/null
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-16m.dtsi"
+
+/ {
+ compatible = "cdns,xtensa-lx200";
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x06000000>;
+ };
+ pic: pic {
+ compatible = "cdns,xtensa-mx";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+};
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_DC233C=y
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HIGHMEM=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="kc705"
+# CONFIG_COMPACTION is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="test_mmuhifi_c3"
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HAVE_SMP=y
+CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="lx200mx"
+# CONFIG_COMPACTION is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_VM=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
static inline pte_t pte_mkspecial(pte_t pte)
{ return pte; }
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) & ~_PAGE_CA_MASK))
+
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
#define __NR_pivot_root 175
__SYSCALL(175, sys_pivot_root, 2)
#define __NR_umount 176
-__SYSCALL(176, sys_umount, 2)
+__SYSCALL(176, sys_oldumount, 1)
+#define __ARCH_WANT_SYS_OLDUMOUNT
#define __NR_swapoff 177
__SYSCALL(177, sys_swapoff, 1)
#define __NR_sync 178
#define __NR_renameat2 336
__SYSCALL(336, sys_renameat2, 5)
-#define __NR_syscall_count 337
+#define __NR_seccomp 337
+__SYSCALL(337, sys_seccomp, 3)
+#define __NR_getrandom 338
+__SYSCALL(338, sys_getrandom, 3)
+#define __NR_memfd_create 339
+__SYSCALL(339, sys_memfd_create, 2)
+
+#define __NR_syscall_count 340
/*
* sysxtensa syscall handler
{
bool no_sg_merge = !!test_bit(QUEUE_FLAG_NO_SG_MERGE,
&q->queue_flags);
+ bool merge_not_need = bio->bi_vcnt < queue_max_segments(q);
if (no_sg_merge && !bio_flagged(bio, BIO_CLONED) &&
- bio->bi_vcnt < queue_max_segments(q))
+ merge_not_need)
bio->bi_phys_segments = bio->bi_vcnt;
else {
struct bio *nxt = bio->bi_next;
bio->bi_next = NULL;
bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio,
- no_sg_merge);
+ no_sg_merge && merge_not_need);
bio->bi_next = nxt;
}
}
err = e->ops.elevator_init_fn(q, e);
- return 0;
+ if (err)
+ elevator_put(e);
+ return err;
}
EXPORT_SYMBOL(elevator_init);
if (bytes && blk_rq_map_kern(q, rq, buffer, bytes, __GFP_WAIT)) {
err = DRIVER_ERROR << 24;
- goto out;
+ goto error;
}
memset(sense, 0, sizeof(sense));
blk_execute_rq(q, disk, rq, 0);
-out:
err = rq->errors & 0xff; /* only 8 bit SCSI status */
if (err) {
if (rq->sense_len && rq->sense) {
static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */
+static int EC_FLAGS_QUERY_HANDSHAKE; /* Needs QR_EC issued when SCI_EVT set */
/* --------------------------------------------------------------------------
* Transaction Management
}
return wakeup;
} else {
- /*
- * There is firmware refusing to respond QR_EC when SCI_EVT
- * is not set, for which case, we complete the QR_EC
- * without issuing it to the firmware.
- * https://bugzilla.kernel.org/show_bug.cgi?id=86211
- */
- if (!(status & ACPI_EC_FLAG_SCI) &&
+ if (EC_FLAGS_QUERY_HANDSHAKE &&
+ !(status & ACPI_EC_FLAG_SCI) &&
(t->command == ACPI_EC_COMMAND_QUERY)) {
t->flags |= ACPI_EC_COMMAND_POLL;
t->rdata[t->ri++] = 0x00;
pr_debug("***** Command(%s) started *****\n",
acpi_ec_cmd_string(t->command));
start_transaction(ec);
- spin_unlock_irqrestore(&ec->lock, tmp);
- ret = ec_poll(ec);
- spin_lock_irqsave(&ec->lock, tmp);
if (ec->curr->command == ACPI_EC_COMMAND_QUERY) {
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
pr_debug("***** Event stopped *****\n");
}
+ spin_unlock_irqrestore(&ec->lock, tmp);
+ ret = ec_poll(ec);
+ spin_lock_irqsave(&ec->lock, tmp);
pr_debug("***** Command(%s) stopped *****\n",
acpi_ec_cmd_string(t->command));
ec->curr = NULL;
return 0;
}
+/*
+ * Acer EC firmware refuses to respond QR_EC when SCI_EVT is not set, for
+ * which case, we complete the QR_EC without issuing it to the firmware.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=86211
+ */
+static int ec_flag_query_handshake(const struct dmi_system_id *id)
+{
+ pr_debug("Detected the EC firmware requiring QR_EC issued when SCI_EVT set\n");
+ EC_FLAGS_QUERY_HANDSHAKE = 1;
+ return 0;
+}
+
/*
* On some hardware it is necessary to clear events accumulated by the EC during
* sleep. These ECs stop reporting GPEs until they are manually polled, if too
{
ec_clear_on_resume, "Samsung hardware", {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL},
+ {
+ ec_flag_query_handshake, "Acer hardware", {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"), }, NULL},
{},
};
return len;
}
+/*
+ * acpi_companion_match() - Can we match via ACPI companion device
+ * @dev: Device in question
+ *
+ * Check if the given device has an ACPI companion and if that companion has
+ * a valid list of PNP IDs, and if the device is the first (primary) physical
+ * device associated with it.
+ *
+ * If multiple physical devices are attached to a single ACPI companion, we need
+ * to be careful. The usage scenario for this kind of relationship is that all
+ * of the physical devices in question use resources provided by the ACPI
+ * companion. A typical case is an MFD device where all the sub-devices share
+ * the parent's ACPI companion. In such cases we can only allow the primary
+ * (first) physical device to be matched with the help of the companion's PNP
+ * IDs.
+ *
+ * Additional physical devices sharing the ACPI companion can still use
+ * resources available from it but they will be matched normally using functions
+ * provided by their bus types (and analogously for their modalias).
+ */
+static bool acpi_companion_match(const struct device *dev)
+{
+ struct acpi_device *adev;
+ bool ret;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return false;
+
+ if (list_empty(&adev->pnp.ids))
+ return false;
+
+ mutex_lock(&adev->physical_node_lock);
+ if (list_empty(&adev->physical_node_list)) {
+ ret = false;
+ } else {
+ const struct acpi_device_physical_node *node;
+
+ node = list_first_entry(&adev->physical_node_list,
+ struct acpi_device_physical_node, node);
+ ret = node->dev == dev;
+ }
+ mutex_unlock(&adev->physical_node_lock);
+
+ return ret;
+}
+
/*
* Creates uevent modalias field for ACPI enumerated devices.
* Because the other buses does not support ACPI HIDs & CIDs.
*/
int acpi_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env)
{
- struct acpi_device *acpi_dev;
int len;
- acpi_dev = ACPI_COMPANION(dev);
- if (!acpi_dev)
- return -ENODEV;
-
- /* Fall back to bus specific way of modalias exporting */
- if (list_empty(&acpi_dev->pnp.ids))
+ if (!acpi_companion_match(dev))
return -ENODEV;
if (add_uevent_var(env, "MODALIAS="))
return -ENOMEM;
- len = create_modalias(acpi_dev, &env->buf[env->buflen - 1],
+ len = create_modalias(ACPI_COMPANION(dev), &env->buf[env->buflen - 1],
sizeof(env->buf) - env->buflen);
if (len <= 0)
return len;
*/
int acpi_device_modalias(struct device *dev, char *buf, int size)
{
- struct acpi_device *acpi_dev;
int len;
- acpi_dev = ACPI_COMPANION(dev);
- if (!acpi_dev)
+ if (!acpi_companion_match(dev))
return -ENODEV;
- /* Fall back to bus specific way of modalias exporting */
- if (list_empty(&acpi_dev->pnp.ids))
- return -ENODEV;
-
- len = create_modalias(acpi_dev, buf, size -1);
+ len = create_modalias(ACPI_COMPANION(dev), buf, size -1);
if (len <= 0)
return len;
buf[len++] = '\n';
if (!ids || !handle || acpi_bus_get_device(handle, &adev))
return NULL;
+ if (!acpi_companion_match(dev))
+ return NULL;
+
return __acpi_match_device(adev, ids);
}
EXPORT_SYMBOL_GPL(acpi_match_device);
Drivers should "select" this option if they desire to use the
device coredump mechanism.
-config DISABLE_DEV_COREDUMP
- bool "Disable device coredump" if EXPERT
+config ALLOW_DEV_COREDUMP
+ bool "Allow device coredump" if EXPERT
+ default y
help
- Disable the device coredump mechanism despite drivers wanting to
- use it; this allows for more sensitive systems or systems that
- don't want to ever access the information to not have the code,
- nor keep any data.
+ This option controls if the device coredump mechanism is available or
+ not; if disabled, the mechanism will be omitted even if drivers that
+ can use it are enabled.
+ Say 'N' for more sensitive systems or systems that don't want
+ to ever access the information to not have the code, nor keep any
+ data.
- If unsure, say N.
+ If unsure, say Y.
config DEV_COREDUMP
bool
default y if WANT_DEV_COREDUMP
- depends on !DISABLE_DEV_COREDUMP
+ depends on ALLOW_DEV_COREDUMP
config DEBUG_DRIVER
bool "Driver Core verbose debug messages"
return &dir->kobj;
}
+static DEFINE_MUTEX(gdp_mutex);
static struct kobject *get_device_parent(struct device *dev,
struct device *parent)
{
if (dev->class) {
- static DEFINE_MUTEX(gdp_mutex);
struct kobject *kobj = NULL;
struct kobject *parent_kobj;
struct kobject *k;
glue_dir->kset != &dev->class->p->glue_dirs)
return;
+ mutex_lock(&gdp_mutex);
kobject_put(glue_dir);
+ mutex_unlock(&gdp_mutex);
}
static void cleanup_device_parent(struct device *dev)
#undef pr_fmt
#define pr_fmt(fmt) fmt
-static void rmem_cma_device_init(struct reserved_mem *rmem, struct device *dev)
+static int rmem_cma_device_init(struct reserved_mem *rmem, struct device *dev)
{
dev_set_cma_area(dev, rmem->priv);
+ return 0;
}
static void rmem_cma_device_release(struct reserved_mem *rmem,
}
mutex_unlock(&dpm_list_mtx);
async_synchronize_full();
+ if (!error)
+ error = async_error;
if (error) {
suspend_stats.failed_suspend_late++;
dpm_save_failed_step(SUSPEND_SUSPEND_LATE);
static const struct pci_device_id bcma_pci_bridge_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, /* 0xa8d8 */
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xA8DB */
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
{ 0, },
};
MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
return false;
}
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_ADDRESS)
static struct device_node *bcma_of_find_child_device(struct platform_device *parent,
struct bcma_device *core)
{
ret = setup_commands(nq);
if (ret)
- goto err_queue;
+ return ret;
nullb->nr_queues++;
}
-
return 0;
-err_queue:
- cleanup_queues(nullb);
- return ret;
}
static int null_add_dev(void)
goto out_cleanup_queues;
}
blk_queue_make_request(nullb->q, null_queue_bio);
- init_driver_queues(nullb);
+ rv = init_driver_queues(nullb);
+ if (rv)
+ goto out_cleanup_blk_queue;
} else {
nullb->q = blk_init_queue_node(null_request_fn, &nullb->lock, home_node);
if (!nullb->q) {
}
blk_queue_prep_rq(nullb->q, null_rq_prep_fn);
blk_queue_softirq_done(nullb->q, null_softirq_done_fn);
- init_driver_queues(nullb);
+ rv = init_driver_queues(nullb);
+ if (rv)
+ goto out_cleanup_blk_queue;
}
nullb->q->queuedata = nullb;
struct list_head rq_queue; /* incoming rq queue */
spinlock_t lock; /* queue, flags, open_count */
- struct workqueue_struct *rq_wq;
struct work_struct rq_work;
struct rbd_image_header header;
static int rbd_major;
static DEFINE_IDA(rbd_dev_id_ida);
+static struct workqueue_struct *rbd_wq;
+
/*
* Default to false for now, as single-major requires >= 0.75 version of
* userspace rbd utility.
}
if (queued)
- queue_work(rbd_dev->rq_wq, &rbd_dev->rq_work);
+ queue_work(rbd_wq, &rbd_dev->rq_work);
}
/*
page_count = (u32) calc_pages_for(offset, length);
pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
if (IS_ERR(pages))
- ret = PTR_ERR(pages);
+ return PTR_ERR(pages);
ret = -ENOMEM;
obj_request = rbd_obj_request_create(object_name, offset, length,
set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE);
set_disk_ro(rbd_dev->disk, rbd_dev->mapping.read_only);
- rbd_dev->rq_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
- rbd_dev->disk->disk_name);
- if (!rbd_dev->rq_wq) {
- ret = -ENOMEM;
- goto err_out_mapping;
- }
-
ret = rbd_bus_add_dev(rbd_dev);
if (ret)
- goto err_out_workqueue;
+ goto err_out_mapping;
/* Everything's ready. Announce the disk to the world. */
return ret;
-err_out_workqueue:
- destroy_workqueue(rbd_dev->rq_wq);
- rbd_dev->rq_wq = NULL;
err_out_mapping:
rbd_dev_mapping_clear(rbd_dev);
err_out_disk:
{
struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
- destroy_workqueue(rbd_dev->rq_wq);
rbd_free_disk(rbd_dev);
clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags);
rbd_dev_mapping_clear(rbd_dev);
if (rc)
return rc;
+ /*
+ * The number of active work items is limited by the number of
+ * rbd devices, so leave @max_active at default.
+ */
+ rbd_wq = alloc_workqueue(RBD_DRV_NAME, WQ_MEM_RECLAIM, 0);
+ if (!rbd_wq) {
+ rc = -ENOMEM;
+ goto err_out_slab;
+ }
+
if (single_major) {
rbd_major = register_blkdev(0, RBD_DRV_NAME);
if (rbd_major < 0) {
rc = rbd_major;
- goto err_out_slab;
+ goto err_out_wq;
}
}
err_out_blkdev:
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+err_out_wq:
+ destroy_workqueue(rbd_wq);
err_out_slab:
rbd_slab_exit();
return rc;
rbd_sysfs_cleanup();
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+ destroy_workqueue(rbd_wq);
rbd_slab_exit();
}
u8 vdisk_mtype;
char disk_name[32];
-
- struct vio_disk_vtoc label;
};
static inline struct vdc_port *to_vdc_port(struct vio_driver_state *vio)
if (comp.err)
return comp.err;
- err = generic_request(port, VD_OP_GET_VTOC,
- &port->label, sizeof(port->label));
- if (err < 0) {
- printk(KERN_ERR PFX "VD_OP_GET_VTOC returns error %d\n", err);
- return err;
- }
-
if (vdc_version_supported(port, 1, 1)) {
/* vdisk_size should be set during the handshake, if it wasn't
* then the underlying disk is reserved by another system
{
u64 val = 0;
struct zram *zram = dev_to_zram(dev);
- struct zram_meta *meta = zram->meta;
down_read(&zram->init_lock);
- if (init_done(zram))
+ if (init_done(zram)) {
+ struct zram_meta *meta = zram->meta;
val = zs_get_total_pages(meta->mem_pool);
+ }
up_read(&zram->init_lock);
return scnprintf(buf, PAGE_SIZE, "%llu\n", val << PAGE_SHIFT);
int err;
unsigned long val;
struct zram *zram = dev_to_zram(dev);
- struct zram_meta *meta = zram->meta;
err = kstrtoul(buf, 10, &val);
if (err || val != 0)
return -EINVAL;
down_read(&zram->init_lock);
- if (init_done(zram))
+ if (init_done(zram)) {
+ struct zram_meta *meta = zram->meta;
atomic_long_set(&zram->stats.max_used_pages,
zs_get_total_pages(meta->mem_pool));
+ }
up_read(&zram->init_lock);
return len;
#include <asm/vio.h>
-static int pseries_rng_data_read(struct hwrng *rng, u32 *data)
+static int pseries_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
{
+ u64 buffer[PLPAR_HCALL_BUFSIZE];
+ size_t size = max < 8 ? max : 8;
int rc;
- rc = plpar_hcall(H_RANDOM, (unsigned long *)data);
+ rc = plpar_hcall(H_RANDOM, (unsigned long *)buffer);
if (rc != H_SUCCESS) {
pr_err_ratelimited("H_RANDOM call failed %d\n", rc);
return -EIO;
}
+ memcpy(data, buffer, size);
/* The hypervisor interface returns 64 bits */
- return 8;
+ return size;
}
/**
static struct hwrng pseries_rng = {
.name = KBUILD_MODNAME,
- .data_read = pseries_rng_data_read,
+ .read = pseries_rng_read,
};
static int __init pseries_rng_probe(struct vio_dev *dev,
static const struct file_operations raw_fops = {
.read = new_sync_read,
- .read_iter = generic_file_read_iter,
+ .read_iter = blkdev_read_iter,
.write = new_sync_write,
.write_iter = blkdev_write_iter,
.fsync = blkdev_fsync,
arch_timer_probed(int type, const struct of_device_id *matches)
{
struct device_node *dn;
- bool probed = false;
+ bool probed = true;
dn = of_find_matching_node(NULL, matches);
- if (dn && of_device_is_available(dn) && (arch_timers_present & type))
- probed = true;
+ if (dn && of_device_is_available(dn) && !(arch_timers_present & type))
+ probed = false;
of_node_put(dn);
return probed;
struct device *cpu_dev;
struct regulator *cpu_reg;
struct clk *cpu_clk;
+ unsigned long min_uV = ~0, max_uV = 0;
unsigned int transition_latency;
int ret;
/* OPPs might be populated at runtime, don't check for error here */
of_init_opp_table(cpu_dev);
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
- if (ret) {
- dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
- goto out_put_node;
- }
-
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
- goto out_free_table;
+ goto out_put_node;
}
of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
transition_latency = CPUFREQ_ETERNAL;
if (!IS_ERR(cpu_reg)) {
- struct dev_pm_opp *opp;
- unsigned long min_uV, max_uV;
- int i;
+ unsigned long opp_freq = 0;
/*
- * OPP is maintained in order of increasing frequency, and
- * freq_table initialised from OPP is therefore sorted in the
- * same order.
+ * Disable any OPPs where the connected regulator isn't able to
+ * provide the specified voltage and record minimum and maximum
+ * voltage levels.
*/
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
- ;
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_exact(cpu_dev,
- freq_table[0].frequency * 1000, true);
- min_uV = dev_pm_opp_get_voltage(opp);
- opp = dev_pm_opp_find_freq_exact(cpu_dev,
- freq_table[i-1].frequency * 1000, true);
- max_uV = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
+ while (1) {
+ struct dev_pm_opp *opp;
+ unsigned long opp_uV, tol_uV;
+
+ rcu_read_lock();
+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ break;
+ }
+ opp_uV = dev_pm_opp_get_voltage(opp);
+ rcu_read_unlock();
+
+ tol_uV = opp_uV * priv->voltage_tolerance / 100;
+ if (regulator_is_supported_voltage(cpu_reg, opp_uV,
+ opp_uV + tol_uV)) {
+ if (opp_uV < min_uV)
+ min_uV = opp_uV;
+ if (opp_uV > max_uV)
+ max_uV = opp_uV;
+ } else {
+ dev_pm_opp_disable(cpu_dev, opp_freq);
+ }
+
+ opp_freq++;
+ }
+
ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
if (ret > 0)
transition_latency += ret * 1000;
}
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ pr_err("failed to init cpufreq table: %d\n", ret);
+ goto out_free_priv;
+ }
+
/*
* For now, just loading the cooling device;
* thermal DT code takes care of matching them.
policy->cpuinfo.transition_latency = transition_latency;
pd = cpufreq_get_driver_data();
- if (pd && !pd->independent_clocks)
+ if (!pd || !pd->independent_clocks)
cpumask_setall(policy->cpus);
of_node_put(np);
out_cooling_unregister:
cpufreq_cooling_unregister(priv->cdev);
- kfree(priv);
-out_free_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_priv:
+ kfree(priv);
out_put_node:
of_node_put(np);
out_put_reg_clk:
u32 *desc;
struct split_key_result result;
dma_addr_t dma_addr_in, dma_addr_out;
- int ret = 0;
+ int ret = -ENOMEM;
desc = kmalloc(CAAM_CMD_SZ * 6 + CAAM_PTR_SZ * 2, GFP_KERNEL | GFP_DMA);
if (!desc) {
dev_err(jrdev, "unable to allocate key input memory\n");
- return -ENOMEM;
+ return ret;
}
- init_job_desc(desc, 0);
-
dma_addr_in = dma_map_single(jrdev, (void *)key_in, keylen,
DMA_TO_DEVICE);
if (dma_mapping_error(jrdev, dma_addr_in)) {
dev_err(jrdev, "unable to map key input memory\n");
- kfree(desc);
- return -ENOMEM;
+ goto out_free;
}
+
+ dma_addr_out = dma_map_single(jrdev, key_out, split_key_pad_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(jrdev, dma_addr_out)) {
+ dev_err(jrdev, "unable to map key output memory\n");
+ goto out_unmap_in;
+ }
+
+ init_job_desc(desc, 0);
append_key(desc, dma_addr_in, keylen, CLASS_2 | KEY_DEST_CLASS_REG);
/* Sets MDHA up into an HMAC-INIT */
* FIFO_STORE with the explicit split-key content store
* (0x26 output type)
*/
- dma_addr_out = dma_map_single(jrdev, key_out, split_key_pad_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(jrdev, dma_addr_out)) {
- dev_err(jrdev, "unable to map key output memory\n");
- kfree(desc);
- return -ENOMEM;
- }
append_fifo_store(desc, dma_addr_out, split_key_len,
LDST_CLASS_2_CCB | FIFOST_TYPE_SPLIT_KEK);
dma_unmap_single(jrdev, dma_addr_out, split_key_pad_len,
DMA_FROM_DEVICE);
+out_unmap_in:
dma_unmap_single(jrdev, dma_addr_in, keylen, DMA_TO_DEVICE);
-
+out_free:
kfree(desc);
-
return ret;
}
EXPORT_SYMBOL(gen_split_key);
struct dentry *debugfs_dir;
struct list_head list;
struct module *owner;
- uint8_t accel_id;
- uint8_t numa_node;
struct adf_accel_pci accel_pci_dev;
+ uint8_t accel_id;
} __packed;
#endif
WRITE_CSR_RING_BASE(csr_addr, bank_num, i, 0);
ring = &bank->rings[i];
if (hw_data->tx_rings_mask & (1 << i)) {
- ring->inflights = kzalloc_node(sizeof(atomic_t),
- GFP_KERNEL,
- accel_dev->numa_node);
+ ring->inflights =
+ kzalloc_node(sizeof(atomic_t),
+ GFP_KERNEL,
+ dev_to_node(&GET_DEV(accel_dev)));
if (!ring->inflights)
goto err;
} else {
int i, ret;
etr_data = kzalloc_node(sizeof(*etr_data), GFP_KERNEL,
- accel_dev->numa_node);
+ dev_to_node(&GET_DEV(accel_dev)));
if (!etr_data)
return -ENOMEM;
num_banks = GET_MAX_BANKS(accel_dev);
size = num_banks * sizeof(struct adf_etr_bank_data);
- etr_data->banks = kzalloc_node(size, GFP_KERNEL, accel_dev->numa_node);
+ etr_data->banks = kzalloc_node(size, GFP_KERNEL,
+ dev_to_node(&GET_DEV(accel_dev)));
if (!etr_data->banks) {
ret = -ENOMEM;
goto err_bank;
if (unlikely(!n))
return -EINVAL;
- bufl = kmalloc_node(sz, GFP_ATOMIC, inst->accel_dev->numa_node);
+ bufl = kmalloc_node(sz, GFP_ATOMIC,
+ dev_to_node(&GET_DEV(inst->accel_dev)));
if (unlikely(!bufl))
return -ENOMEM;
goto err;
for_each_sg(assoc, sg, assoc_n, i) {
+ if (!sg->length)
+ continue;
bufl->bufers[bufs].addr = dma_map_single(dev,
sg_virt(sg),
sg->length,
struct qat_alg_buf *bufers;
buflout = kmalloc_node(sz, GFP_ATOMIC,
- inst->accel_dev->numa_node);
+ dev_to_node(&GET_DEV(inst->accel_dev)));
if (unlikely(!buflout))
goto err;
bloutp = dma_map_single(dev, buflout, sz, DMA_TO_DEVICE);
list_for_each(itr, adf_devmgr_get_head()) {
accel_dev = list_entry(itr, struct adf_accel_dev, list);
- if (accel_dev->numa_node == node && adf_dev_started(accel_dev))
+ if ((node == dev_to_node(&GET_DEV(accel_dev)) ||
+ dev_to_node(&GET_DEV(accel_dev)) < 0)
+ && adf_dev_started(accel_dev))
break;
accel_dev = NULL;
}
if (!accel_dev) {
- pr_err("QAT: Could not find device on give node\n");
+ pr_err("QAT: Could not find device on node %d\n", node);
accel_dev = adf_devmgr_get_first();
}
if (!accel_dev || !adf_dev_started(accel_dev))
for (i = 0; i < num_inst; i++) {
inst = kzalloc_node(sizeof(*inst), GFP_KERNEL,
- accel_dev->numa_node);
+ dev_to_node(&GET_DEV(accel_dev)));
if (!inst)
goto err;
uint64_t reg_val;
admin = kzalloc_node(sizeof(*accel_dev->admin), GFP_KERNEL,
- accel_dev->numa_node);
+ dev_to_node(&GET_DEV(accel_dev)));
if (!admin)
return -ENOMEM;
admin->virt_addr = dma_zalloc_coherent(&GET_DEV(accel_dev), PAGE_SIZE,
kfree(accel_dev);
}
-static uint8_t adf_get_dev_node_id(struct pci_dev *pdev)
-{
- unsigned int bus_per_cpu = 0;
- struct cpuinfo_x86 *c = &cpu_data(num_online_cpus() - 1);
-
- if (!c->phys_proc_id)
- return 0;
-
- bus_per_cpu = 256 / (c->phys_proc_id + 1);
-
- if (bus_per_cpu != 0)
- return pdev->bus->number / bus_per_cpu;
- return 0;
-}
-
static int qat_dev_start(struct adf_accel_dev *accel_dev)
{
int cpus = num_online_cpus();
void __iomem *pmisc_bar_addr = NULL;
char name[ADF_DEVICE_NAME_LENGTH];
unsigned int i, bar_nr;
- uint8_t node;
int ret;
switch (ent->device) {
return -ENODEV;
}
- node = adf_get_dev_node_id(pdev);
- accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL, node);
+ if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) {
+ /* If the accelerator is connected to a node with no memory
+ * there is no point in using the accelerator since the remote
+ * memory transaction will be very slow. */
+ dev_err(&pdev->dev, "Invalid NUMA configuration.\n");
+ return -EINVAL;
+ }
+
+ accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL,
+ dev_to_node(&pdev->dev));
if (!accel_dev)
return -ENOMEM;
- accel_dev->numa_node = node;
INIT_LIST_HEAD(&accel_dev->crypto_list);
/* Add accel device to accel table.
accel_dev->owner = THIS_MODULE;
/* Allocate and configure device configuration structure */
- hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL, node);
+ hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL,
+ dev_to_node(&pdev->dev));
if (!hw_data) {
ret = -ENOMEM;
goto out_err;
uint32_t msix_num_entries = hw_data->num_banks + 1;
entries = kzalloc_node(msix_num_entries * sizeof(*entries),
- GFP_KERNEL, accel_dev->numa_node);
+ GFP_KERNEL, dev_to_node(&GET_DEV(accel_dev)));
if (!entries)
return -ENOMEM;
}
EXPORT_SYMBOL(edma_filter_fn);
-static struct platform_device *pdev0, *pdev1;
-
-static const struct platform_device_info edma_dev_info0 = {
- .name = "edma-dma-engine",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-static const struct platform_device_info edma_dev_info1 = {
- .name = "edma-dma-engine",
- .id = 1,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
static int edma_init(void)
{
- int ret = platform_driver_register(&edma_driver);
-
- if (ret == 0) {
- pdev0 = platform_device_register_full(&edma_dev_info0);
- if (IS_ERR(pdev0)) {
- platform_driver_unregister(&edma_driver);
- ret = PTR_ERR(pdev0);
- goto out;
- }
- }
-
- if (!of_have_populated_dt() && EDMA_CTLRS == 2) {
- pdev1 = platform_device_register_full(&edma_dev_info1);
- if (IS_ERR(pdev1)) {
- platform_driver_unregister(&edma_driver);
- platform_device_unregister(pdev0);
- ret = PTR_ERR(pdev1);
- }
- }
-
-out:
- return ret;
+ return platform_driver_register(&edma_driver);
}
subsys_initcall(edma_init);
static void __exit edma_exit(void)
{
- platform_device_unregister(pdev0);
- if (pdev1)
- platform_device_unregister(pdev1);
platform_driver_unregister(&edma_driver);
}
module_exit(edma_exit);
* Tell the DRM core that vblank IRQs aren't going to happen for
* a while. This cleans up any pending vblank events for us.
*/
- drm_vblank_off(dev, dcrtc->num);
+ drm_crtc_vblank_off(&dcrtc->crtc);
/* Handle any pending flip event. */
spin_lock_irq(&dev->event_lock);
armada_drm_crtc_update(dcrtc);
if (dpms_blanked(dpms))
armada_drm_vblank_off(dcrtc);
+ else
+ drm_crtc_vblank_on(&dcrtc->crtc);
}
}
/* Wait for pending flips to complete */
wait_event(dcrtc->frame_wait, !dcrtc->frame_work);
- drm_vblank_pre_modeset(crtc->dev, dcrtc->num);
+ drm_crtc_vblank_off(crtc);
crtc->mode = *adj;
armada_drm_crtc_update(dcrtc);
- drm_vblank_post_modeset(crtc->dev, dcrtc->num);
+ drm_crtc_vblank_on(crtc);
armada_drm_crtc_finish_fb(dcrtc, old_fb, dpms_blanked(dcrtc->dpms));
return 0;
armada_reg_queue_end(work->regs, i);
/*
- * Hold the old framebuffer for the work - DRM appears to drop our
- * reference to the old framebuffer in drm_mode_page_flip_ioctl().
+ * Ensure that we hold a reference on the new framebuffer.
+ * This has to match the behaviour in mode_set.
*/
- drm_framebuffer_reference(work->old_fb);
+ drm_framebuffer_reference(fb);
ret = armada_drm_crtc_queue_frame_work(dcrtc, work);
if (ret) {
- /*
- * Undo our reference above; DRM does not drop the reference
- * to this object on error, so that's okay.
- */
- drm_framebuffer_unreference(work->old_fb);
+ /* Undo our reference above */
+ drm_framebuffer_unreference(fb);
kfree(work);
return ret;
}
if (ret)
goto err_comp;
+ dev->irq_enabled = true;
dev->vblank_disable_allowed = 1;
ret = armada_fbdev_init(dev);
.desc = "Armada SoC DRM",
.date = "20120730",
.driver_features = DRIVER_GEM | DRIVER_MODESET |
- DRIVER_PRIME,
+ DRIVER_HAVE_IRQ | DRIVER_PRIME,
.ioctls = armada_ioctls,
.fops = &armada_drm_fops,
};
void *data)
{
struct exynos_drm_display *display = dev_get_drvdata(dev);
- struct exynos_dp_device *dp = display->ctx;
- struct drm_encoder *encoder = dp->encoder;
exynos_dp_dpms(display, DRM_MODE_DPMS_OFF);
-
- exynos_dp_connector_destroy(&dp->connector);
- encoder->funcs->destroy(encoder);
}
static const struct component_ops exynos_dp_ops = {
!atomic_read(&exynos_crtc->pending_flip),
HZ/20))
atomic_set(&exynos_crtc->pending_flip, 0);
- drm_vblank_off(crtc->dev, exynos_crtc->pipe);
+ drm_crtc_vblank_off(crtc);
}
if (manager->ops->dpms)
manager->ops->dpms(manager, mode);
exynos_crtc->dpms = mode;
+
+ if (mode == DRM_MODE_DPMS_ON)
+ drm_crtc_vblank_on(crtc);
}
static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
int exynos_dpi_remove(struct device *dev)
{
- struct drm_encoder *encoder = exynos_dpi_display.encoder;
struct exynos_dpi *ctx = exynos_dpi_display.ctx;
exynos_dpi_dpms(&exynos_dpi_display, DRM_MODE_DPMS_OFF);
- exynos_dpi_connector_destroy(&ctx->connector);
- encoder->funcs->destroy(encoder);
-
if (ctx->panel)
drm_panel_detach(ctx->panel);
plane = exynos_plane_init(dev, possible_crtcs,
DRM_PLANE_TYPE_OVERLAY);
- if (IS_ERR(plane))
- goto err_mode_config_cleanup;
- }
-
- /* init kms poll for handling hpd */
- drm_kms_helper_poll_init(dev);
+ if (!IS_ERR(plane))
+ continue;
- ret = drm_vblank_init(dev, MAX_CRTC);
- if (ret)
+ ret = PTR_ERR(plane);
goto err_mode_config_cleanup;
+ }
/* setup possible_clones. */
exynos_drm_encoder_setup(dev);
/* Try to bind all sub drivers. */
ret = component_bind_all(dev->dev, dev);
if (ret)
- goto err_cleanup_vblank;
+ goto err_mode_config_cleanup;
- /* Probe non kms sub drivers and virtual display driver. */
- ret = exynos_drm_device_subdrv_probe(dev);
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret)
goto err_unbind_all;
- /* force connectors detection */
- drm_helper_hpd_irq_event(dev);
+ /* Probe non kms sub drivers and virtual display driver. */
+ ret = exynos_drm_device_subdrv_probe(dev);
+ if (ret)
+ goto err_cleanup_vblank;
/*
* enable drm irq mode.
*/
dev->vblank_disable_allowed = true;
+ /* init kms poll for handling hpd */
+ drm_kms_helper_poll_init(dev);
+
+ /* force connectors detection */
+ drm_helper_hpd_irq_event(dev);
+
return 0;
-err_unbind_all:
- component_unbind_all(dev->dev, dev);
err_cleanup_vblank:
drm_vblank_cleanup(dev);
+err_unbind_all:
+ component_unbind_all(dev->dev, dev);
err_mode_config_cleanup:
drm_mode_config_cleanup(dev);
drm_release_iommu_mapping(dev);
exynos_drm_fbdev_fini(dev);
drm_kms_helper_poll_fini(dev);
- component_unbind_all(dev->dev, dev);
drm_vblank_cleanup(dev);
+ component_unbind_all(dev->dev, dev);
drm_mode_config_cleanup(dev);
drm_release_iommu_mapping(dev);
drm_modeset_lock_all(dev);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (connector->funcs->dpms)
- connector->funcs->dpms(connector, connector->dpms);
+ if (connector->funcs->dpms) {
+ int dpms = connector->dpms;
+
+ connector->dpms = DRM_MODE_DPMS_OFF;
+ connector->funcs->dpms(connector, dpms);
+ }
}
drm_modeset_unlock_all(dev);
void *data)
{
struct exynos_dsi *dsi = exynos_dsi_display.ctx;
- struct drm_encoder *encoder = dsi->encoder;
exynos_dsi_dpms(&exynos_dsi_display, DRM_MODE_DPMS_OFF);
- exynos_dsi_connector_destroy(&dsi->connector);
- encoder->funcs->destroy(encoder);
-
mipi_dsi_host_unregister(&dsi->dsi_host);
}
{
struct exynos_drm_manager *mgr = platform_get_drvdata(pdev);
struct vidi_context *ctx = mgr->ctx;
- struct drm_encoder *encoder = ctx->encoder;
if (ctx->raw_edid != (struct edid *)fake_edid_info) {
kfree(ctx->raw_edid);
return -EINVAL;
}
- encoder->funcs->destroy(encoder);
- drm_connector_cleanup(&ctx->connector);
-
return 0;
}
static void hdmi_unbind(struct device *dev, struct device *master, void *data)
{
- struct exynos_drm_display *display = get_hdmi_display(dev);
- struct drm_encoder *encoder = display->encoder;
- struct hdmi_context *hdata = display->ctx;
-
- hdmi_connector_destroy(&hdata->connector);
- encoder->funcs->destroy(encoder);
}
static const struct component_ops hdmi_component_ops = {
return i915_drm_freeze(drm_dev);
}
+static int i915_pm_freeze_late(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+ struct drm_i915_private *dev_priv = drm_dev->dev_private;
+
+ return intel_suspend_complete(dev_priv);
+}
+
static int i915_pm_thaw_early(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
.resume_early = i915_pm_resume_early,
.resume = i915_pm_resume,
.freeze = i915_pm_freeze,
+ .freeze_late = i915_pm_freeze_late,
.thaw_early = i915_pm_thaw_early,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
GEN8_PPAT(6, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(2)) |
GEN8_PPAT(7, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(3));
+ if (!USES_PPGTT(dev_priv->dev))
+ /* Spec: "For GGTT, there is NO pat_sel[2:0] from the entry,
+ * so RTL will always use the value corresponding to
+ * pat_sel = 000".
+ * So let's disable cache for GGTT to avoid screen corruptions.
+ * MOCS still can be used though.
+ * - System agent ggtt writes (i.e. cpu gtt mmaps) already work
+ * before this patch, i.e. the same uncached + snooping access
+ * like on gen6/7 seems to be in effect.
+ * - So this just fixes blitter/render access. Again it looks
+ * like it's not just uncached access, but uncached + snooping.
+ * So we can still hold onto all our assumptions wrt cpu
+ * clflushing on LLC machines.
+ */
+ pat = GEN8_PPAT(0, GEN8_PPAT_UC);
+
/* XXX: spec defines this as 2 distinct registers. It's unclear if a 64b
* write would work. */
I915_WRITE(GEN8_PRIVATE_PAT, pat);
* BSpec erroneously claims we should aim for 4MHz, but
* in fact 1MHz is the correct frequency.
*/
- I915_WRITE(GMBUSFREQ_VLV, dev_priv->vlv_cdclk_freq);
+ I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->vlv_cdclk_freq, 1000));
}
/* Adjust CDclk dividers to allow high res or save power if possible */
/* Acer C720 Chromebook (Core i3 4005U) */
{ 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
+ /* Apple Macbook 2,1 (Core 2 T7400) */
+ { 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
+
/* Toshiba CB35 Chromebook (Celeron 2955U) */
{ 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
ssize_t ret;
int i;
+ /*
+ * Sometime we just get the same incorrect byte repeated
+ * over the entire buffer. Doing just one throw away read
+ * initially seems to "solve" it.
+ */
+ drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
+
for (i = 0; i < 3; i++) {
ret = drm_dp_dpcd_read(aux, offset, buffer, size);
if (ret == size)
}
}
- /* Training Pattern 3 support */
+ /* Training Pattern 3 support, both source and sink */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
- intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED) {
+ intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED &&
+ (IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8)) {
intel_dp->use_tps3 = true;
DRM_DEBUG_KMS("Displayport TPS3 supported\n");
} else
if (intel_dig_port->base.type != INTEL_OUTPUT_EDP)
intel_dig_port->base.type = INTEL_OUTPUT_DISPLAYPORT;
+ if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
+ /*
+ * vdd off can generate a long pulse on eDP which
+ * would require vdd on to handle it, and thus we
+ * would end up in an endless cycle of
+ * "vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."
+ */
+ DRM_DEBUG_KMS("ignoring long hpd on eDP port %c\n",
+ port_name(intel_dig_port->port));
+ return false;
+ }
+
DRM_DEBUG_KMS("got hpd irq on port %c - %s\n",
port_name(intel_dig_port->port),
long_hpd ? "long" : "short");
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
+ int min;
WARN_ON(panel->backlight.max == 0);
+ /*
+ * XXX: If the vbt value is 255, it makes min equal to max, which leads
+ * to problems. There are such machines out there. Either our
+ * interpretation is wrong or the vbt has bogus data. Or both. Safeguard
+ * against this by letting the minimum be at most (arbitrarily chosen)
+ * 25% of the max.
+ */
+ min = clamp_t(int, dev_priv->vbt.backlight.min_brightness, 0, 64);
+ if (min != dev_priv->vbt.backlight.min_brightness) {
+ DRM_DEBUG_KMS("clamping VBT min backlight %d/255 to %d/255\n",
+ dev_priv->vbt.backlight.min_brightness, min);
+ }
+
/* vbt value is a coefficient in range [0..255] */
- return scale(dev_priv->vbt.backlight.min_brightness, 0, 255,
- 0, panel->backlight.max);
+ return scale(min, 0, 255, 0, panel->backlight.max);
}
static int bdw_setup_backlight(struct intel_connector *connector)
/* init the CE partitions. CE only used for gfx on CIK */
radeon_ring_write(ring, PACKET3(PACKET3_SET_BASE, 2));
radeon_ring_write(ring, PACKET3_BASE_INDEX(CE_PARTITION_BASE));
- radeon_ring_write(ring, 0xc000);
- radeon_ring_write(ring, 0xc000);
+ radeon_ring_write(ring, 0x8000);
+ radeon_ring_write(ring, 0x8000);
/* setup clear context state */
radeon_ring_write(ring, PACKET3(PACKET3_PREAMBLE_CNTL, 0));
u32 num_heads = 0, lb_size;
int i;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
for (i = 0; i < rdev->num_crtc; i++) {
{
struct radeon_ib ib;
unsigned i;
+ unsigned index;
int r;
- void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp = 0;
+ u64 gpu_addr;
- if (!ptr) {
- DRM_ERROR("invalid vram scratch pointer\n");
- return -EINVAL;
- }
+ if (ring->idx == R600_RING_TYPE_DMA_INDEX)
+ index = R600_WB_DMA_RING_TEST_OFFSET;
+ else
+ index = CAYMAN_WB_DMA1_RING_TEST_OFFSET;
+
+ gpu_addr = rdev->wb.gpu_addr + index;
tmp = 0xCAFEDEAD;
- writel(tmp, ptr);
+ rdev->wb.wb[index/4] = cpu_to_le32(tmp);
r = radeon_ib_get(rdev, ring->idx, &ib, NULL, 256);
if (r) {
}
ib.ptr[0] = SDMA_PACKET(SDMA_OPCODE_WRITE, SDMA_WRITE_SUB_OPCODE_LINEAR, 0);
- ib.ptr[1] = rdev->vram_scratch.gpu_addr & 0xfffffffc;
- ib.ptr[2] = upper_32_bits(rdev->vram_scratch.gpu_addr);
+ ib.ptr[1] = lower_32_bits(gpu_addr);
+ ib.ptr[2] = upper_32_bits(gpu_addr);
ib.ptr[3] = 1;
ib.ptr[4] = 0xDEADBEEF;
ib.length_dw = 5;
return r;
}
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = readl(ptr);
+ tmp = le32_to_cpu(rdev->wb.wb[index/4]);
if (tmp == 0xDEADBEEF)
break;
DRM_UDELAY(1);
u32 num_heads = 0, lb_size;
int i;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
for (i = 0; i < rdev->num_crtc; i++) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + crtc_offsets[i], 1);
tmp |= EVERGREEN_CRTC_BLANK_DATA_EN;
WREG32(EVERGREEN_CRTC_BLANK_CONTROL + crtc_offsets[i], tmp);
+ WREG32(EVERGREEN_CRTC_UPDATE_LOCK + crtc_offsets[i], 0);
}
} else {
tmp = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]);
u32 vgt_cache_invalidation;
u32 hdp_host_path_cntl, tmp;
u32 disabled_rb_mask;
- int i, j, num_shader_engines, ps_thread_count;
+ int i, j, ps_thread_count;
switch (rdev->family) {
case CHIP_CYPRESS:
rdev->config.evergreen.tile_config |=
((gb_addr_config & 0x30000000) >> 28) << 12;
- num_shader_engines = (gb_addr_config & NUM_SHADER_ENGINES(3) >> 12) + 1;
-
if ((rdev->family >= CHIP_CEDAR) && (rdev->family <= CHIP_HEMLOCK)) {
u32 efuse_straps_4;
u32 efuse_straps_3;
pi->sram_end = SMC_RAM_END;
- pi->enable_nb_dpm = true;
+ /* Enabling nb dpm on an asrock system prevents dpm from working */
+ if (rdev->pdev->subsystem_vendor == 0x1849)
+ pi->enable_nb_dpm = false;
+ else
+ pi->enable_nb_dpm = true;
pi->caps_power_containment = true;
pi->caps_cac = true;
pi->caps_sclk_ds = true;
pi->enable_auto_thermal_throttling = true;
pi->disable_nb_ps3_in_battery = false;
- if (radeon_bapm == 0)
+ if (radeon_bapm == -1) {
+ /* There are stability issues reported on with
+ * bapm enabled on an asrock system.
+ */
+ if (rdev->pdev->subsystem_vendor == 0x1849)
+ pi->bapm_enable = false;
+ else
+ pi->bapm_enable = true;
+ } else if (radeon_bapm == 0) {
pi->bapm_enable = false;
- else
+ } else {
pi->bapm_enable = true;
+ }
pi->voltage_drop_t = 0;
pi->caps_sclk_throttle_low_notification = false;
pi->caps_fps = false; /* true? */
uint32_t pixel_bytes1 = 0;
uint32_t pixel_bytes2 = 0;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled) {
{
struct radeon_ib ib;
unsigned i;
+ unsigned index;
int r;
- void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp = 0;
+ u64 gpu_addr;
- if (!ptr) {
- DRM_ERROR("invalid vram scratch pointer\n");
- return -EINVAL;
- }
+ if (ring->idx == R600_RING_TYPE_DMA_INDEX)
+ index = R600_WB_DMA_RING_TEST_OFFSET;
+ else
+ index = CAYMAN_WB_DMA1_RING_TEST_OFFSET;
- tmp = 0xCAFEDEAD;
- writel(tmp, ptr);
+ gpu_addr = rdev->wb.gpu_addr + index;
r = radeon_ib_get(rdev, ring->idx, &ib, NULL, 256);
if (r) {
}
ib.ptr[0] = DMA_PACKET(DMA_PACKET_WRITE, 0, 0, 1);
- ib.ptr[1] = rdev->vram_scratch.gpu_addr & 0xfffffffc;
- ib.ptr[2] = upper_32_bits(rdev->vram_scratch.gpu_addr) & 0xff;
+ ib.ptr[1] = lower_32_bits(gpu_addr);
+ ib.ptr[2] = upper_32_bits(gpu_addr) & 0xff;
ib.ptr[3] = 0xDEADBEEF;
ib.length_dw = 4;
return r;
}
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = readl(ptr);
+ tmp = le32_to_cpu(rdev->wb.wb[index/4]);
if (tmp == 0xDEADBEEF)
break;
DRM_UDELAY(1);
r = igp_read_bios_from_vram(rdev);
if (r == false)
r = radeon_read_bios(rdev);
- if (r == false) {
+ if (r == false)
r = radeon_read_disabled_bios(rdev);
- }
- if (r == false) {
+ if (r == false)
r = radeon_read_platform_bios(rdev);
- }
if (r == false || rdev->bios == NULL) {
DRM_ERROR("Unable to locate a BIOS ROM\n");
rdev->bios = NULL;
kfree(parser->track);
kfree(parser->relocs);
kfree(parser->relocs_ptr);
- kfree(parser->vm_bos);
+ drm_free_large(parser->vm_bos);
for (i = 0; i < parser->nchunks; i++)
drm_free_large(parser->chunks[i].kdata);
kfree(parser->chunks);
}
/* and then save the content of the ring */
- *data = kmalloc_array(size, sizeof(uint32_t), GFP_KERNEL);
+ *data = drm_malloc_ab(size, sizeof(uint32_t));
if (!*data) {
mutex_unlock(&rdev->ring_lock);
return 0;
}
radeon_ring_unlock_commit(rdev, ring, false);
- kfree(data);
+ drm_free_large(data);
return 0;
}
struct radeon_cs_reloc *list;
unsigned i, idx;
- list = kmalloc_array(vm->max_pde_used + 2,
- sizeof(struct radeon_cs_reloc), GFP_KERNEL);
+ list = drm_malloc_ab(vm->max_pde_used + 2,
+ sizeof(struct radeon_cs_reloc));
if (!list)
return NULL;
u32 d1mode_priority_a_cnt, d2mode_priority_a_cnt;
/* FIXME: implement full support */
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled)
u32 d1mode_priority_a_cnt, d1mode_priority_b_cnt;
u32 d2mode_priority_a_cnt, d2mode_priority_b_cnt;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled)
struct drm_display_mode *mode0 = NULL;
struct drm_display_mode *mode1 = NULL;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled)
u32 num_heads = 0, lb_size;
int i;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
for (i = 0; i < rdev->num_crtc; i++) {
if ((rps->class2 & ATOM_PPLIB_CLASSIFICATION2_ULV) &&
index == 0) {
/* XXX disable for A0 tahiti */
- si_pi->ulv.supported = true;
+ si_pi->ulv.supported = false;
si_pi->ulv.pl = *pl;
si_pi->ulv.one_pcie_lane_in_ulv = false;
si_pi->ulv.volt_change_delay = SISLANDS_ULVVOLTAGECHANGEDELAY_DFLT;
struct drm_hash_item *hash;
int ret;
- ret = drm_ht_find_item(&man->resources, user_key, &hash);
+ ret = drm_ht_find_item(&man->resources, user_key | (res_type << 24),
+ &hash);
if (likely(ret != 0))
return -EINVAL;
goto out_err0;
}
- if (unlikely(dev_priv->prim_bb_mem < dev_priv->vram_size))
+ /*
+ * Limit back buffer size to VRAM size. Remove this once
+ * screen targets are implemented.
+ */
+ if (dev_priv->prim_bb_mem > dev_priv->vram_size)
dev_priv->prim_bb_mem = dev_priv->vram_size;
mutex_unlock(&dev_priv->hw_mutex);
* can do this since the caller in the drm core doesn't check anything
* which is protected by any looks.
*/
- drm_modeset_unlock(&crtc->mutex);
+ drm_modeset_unlock_crtc(crtc);
drm_modeset_lock_all(dev_priv->dev);
/* A lot of the code assumes this */
ret = 0;
out:
drm_modeset_unlock_all(dev_priv->dev);
- drm_modeset_lock(&crtc->mutex, NULL);
+ drm_modeset_lock_crtc(crtc);
return ret;
}
* can do this since the caller in the drm core doesn't check anything
* which is protected by any looks.
*/
- drm_modeset_unlock(&crtc->mutex);
+ drm_modeset_unlock_crtc(crtc);
drm_modeset_lock_all(dev_priv->dev);
vmw_cursor_update_position(dev_priv, shown,
du->cursor_y + du->hotspot_y);
drm_modeset_unlock_all(dev_priv->dev);
- drm_modeset_lock(&crtc->mutex, NULL);
+ drm_modeset_lock_crtc(crtc);
return 0;
}
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC)
};
int i;
+ u32 assumed_bpp = 2;
+
+ /*
+ * If using screen objects, then assume 32-bpp because that's what the
+ * SVGA device is assuming
+ */
+ if (dev_priv->sou_priv)
+ assumed_bpp = 4;
/* Add preferred mode */
{
mode->vdisplay = du->pref_height;
vmw_guess_mode_timing(mode);
- if (vmw_kms_validate_mode_vram(dev_priv, mode->hdisplay * 2,
- mode->vdisplay)) {
+ if (vmw_kms_validate_mode_vram(dev_priv,
+ mode->hdisplay * assumed_bpp,
+ mode->vdisplay)) {
drm_mode_probed_add(connector, mode);
} else {
drm_mode_destroy(dev, mode);
bmode->vdisplay > max_height)
continue;
- if (!vmw_kms_validate_mode_vram(dev_priv, bmode->hdisplay * 2,
+ if (!vmw_kms_validate_mode_vram(dev_priv,
+ bmode->hdisplay * assumed_bpp,
bmode->vdisplay))
continue;
tristate "Logitech Unifying receivers full support"
depends on HIDRAW
depends on HID_LOGITECH
+ select HID_LOGITECH_HIDPP
---help---
Say Y if you want support for Logitech Unifying receivers and devices.
Unifying receivers are capable of pairing up to 6 Logitech compliant
generic USB_HID driver and all incoming events will be multiplexed
into a single mouse and a single keyboard device.
+config HID_LOGITECH_HIDPP
+ tristate "Logitech HID++ devices support"
+ depends on HID_LOGITECH
+ ---help---
+ Support for Logitech devices relyingon the HID++ Logitech specification
+
+ Say Y if you want support for Logitech devices relying on the HID++
+ specification. Such devices are the various Logitech Touchpads (T650,
+ T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
+ Keayboard).
+
config LOGITECH_FF
bool "Logitech force feedback support"
depends on HID_LOGITECH
support for its special functionalities.
config HID_SAITEK
- tristate "Saitek non-fully HID-compliant devices"
+ tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
depends on HID
---help---
Support for Saitek devices that are not fully compliant with the
Supported devices:
- PS1000 Dual Analog Pad
+ - R.A.T.9 Gaming Mouse
- R.A.T.7 Gaming Mouse
- M.M.O.7 Gaming Mouse
obj-$(CONFIG_HID_LENOVO) += hid-lenovo.o
obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
obj-$(CONFIG_HID_LOGITECH_DJ) += hid-logitech-dj.o
+obj-$(CONFIG_HID_LOGITECH_HIDPP) += hid-logitech-hidpp.o
obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
if (((parser->global.usage_page << 16) == HID_UP_SENSOR) &&
type == HID_COLLECTION_PHYSICAL)
hid->group = HID_GROUP_SENSOR_HUB;
+
+ if (hid->vendor == USB_VENDOR_ID_MICROSOFT &&
+ hid->product == USB_DEVICE_ID_MS_TYPE_COVER_3 &&
+ hid->group == HID_GROUP_MULTITOUCH)
+ hid->group = HID_GROUP_GENERIC;
}
static int hid_scan_main(struct hid_parser *parser, struct hid_item *item)
(hid->group == HID_GROUP_MULTITOUCH))
hid->group = HID_GROUP_MULTITOUCH_WIN_8;
- /*
- * Vendor specific handlings
- */
- if ((hid->vendor == USB_VENDOR_ID_SYNAPTICS) &&
- (hid->group == HID_GROUP_GENERIC) &&
- /* only bind to the mouse interface of composite USB devices */
- (hid->bus != BUS_USB || hid->type == HID_TYPE_USBMOUSE))
- /* hid-rmi should take care of them, not hid-generic */
- hid->group = HID_GROUP_RMI;
-
/*
* Vendor specific handlings
*/
case USB_VENDOR_ID_WACOM:
hid->group = HID_GROUP_WACOM;
break;
+ case USB_VENDOR_ID_SYNAPTICS:
+ if ((hid->group == HID_GROUP_GENERIC) &&
+ (hid->bus != BUS_USB || hid->type == HID_TYPE_USBMOUSE))
+ /* hid-rmi should only bind to the mouse interface of
+ * composite USB devices */
+ hid->group = HID_GROUP_RMI;
+ break;
}
vfree(parser);
}
EXPORT_SYMBOL_GPL(hid_output_report);
-static int hid_report_len(struct hid_report *report)
-{
- /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */
- return ((report->size - 1) >> 3) + 1 + (report->id > 0);
-}
-
/*
* Allocator for buffer that is going to be passed to hid_output_report()
*/
hdev->hiddev_disconnect(hdev);
if (hdev->claimed & HID_CLAIMED_HIDRAW)
hidraw_disconnect(hdev);
+ hdev->claimed = 0;
}
EXPORT_SYMBOL_GPL(hid_disconnect);
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RECEIVER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_DESKTOP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_MINI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9) },
#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_PS3_BDREMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) },
* Scan generic devices for group information
*/
if (hid_ignore_special_drivers ||
- !hid_match_id(hdev, hid_have_special_driver)) {
+ (!hdev->group &&
+ !hid_match_id(hdev, hid_have_special_driver))) {
ret = hid_scan_report(hdev);
if (ret)
hid_warn(hdev, "bad device descriptor (%d)\n", ret);
#define USB_VENDOR_ID_ELAN 0x04f3
#define USB_DEVICE_ID_ELAN_TOUCHSCREEN 0x0089
#define USB_DEVICE_ID_ELAN_TOUCHSCREEN_009B 0x009b
+#define USB_DEVICE_ID_ELAN_TOUCHSCREEN_0103 0x0103
+#define USB_DEVICE_ID_ELAN_TOUCHSCREEN_010c 0x010c
#define USB_DEVICE_ID_ELAN_TOUCHSCREEN_016F 0x016f
#define USB_VENDOR_ID_ELECOM 0x056e
#define USB_VENDOR_ID_LOGITECH 0x046d
#define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e
+#define USB_DEVICE_ID_LOGITECH_T651 0xb00c
#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101
#define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110
#define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f
#define USB_VENDOR_ID_MADCATZ 0x0738
#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
+#define USB_DEVICE_ID_MADCATZ_RAT9 0x1709
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MS_SURFACE_PRO_2 0x0799
#define USB_DEVICE_ID_MS_TOUCH_COVER_2 0x07a7
#define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9
+#define USB_DEVICE_ID_MS_TYPE_COVER_3 0x07dc
#define USB_VENDOR_ID_MOJO 0x8282
#define USB_DEVICE_ID_RETRO_ADAPTER 0x3201
#define USB_VENDOR_ID_SKYCABLE 0x1223
#define USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER 0x3F07
+#define USB_VENDOR_ID_SMK 0x0609
+#define USB_DEVICE_ID_SMK_PS3_BDREMOTE 0x0306
+
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b
#define USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE 0x0374
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
#define USB_DEVICE_ID_VERNIER_LCSPEC 0x0006
+#define USB_VENDOR_ID_VTL 0x0306
+#define USB_DEVICE_ID_VTL_MULTITOUCH_FF3F 0xff3f
+
#define USB_VENDOR_ID_WACOM 0x056a
#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH 0x81
#define USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH 0x00BD
case 0x2cb: map_key_clear(KEY_KBDINPUTASSIST_ACCEPT); break;
case 0x2cc: map_key_clear(KEY_KBDINPUTASSIST_CANCEL); break;
- default: goto ignore;
+ default: map_key_clear(KEY_UNKNOWN);
}
break;
return hid->ll_driver->request(hid, report, HID_REQ_SET_REPORT);
/* fall back to generic raw-output-report */
- len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+ len = hid_report_len(report);
buf = hid_alloc_report_buf(report, GFP_KERNEL);
if (!buf)
return;
/* HID_UP_LNVENDOR = USB, HID_UP_MSVENDOR = BT */
if ((usage->hid & HID_USAGE_PAGE) == HID_UP_MSVENDOR ||
(usage->hid & HID_USAGE_PAGE) == HID_UP_LNVENDOR) {
- set_bit(EV_REP, hi->input->evbit);
switch (usage->hid & HID_USAGE) {
case 0x00f1: /* Fn-F4: Mic mute */
map_key_clear(KEY_MICMUTE);
case 0x00f8: /* Fn-F11: View open applications (3 boxes) */
map_key_clear(KEY_SCALE);
return 1;
- case 0x00fa: /* Fn-Esc: Fn-lock toggle */
- map_key_clear(KEY_FN_ESC);
- return 1;
- case 0x00fb: /* Fn-F12: Open My computer (6 boxes) USB-only */
+ case 0x00f9: /* Fn-F12: Open My computer (6 boxes) USB-only */
/* NB: This mapping is invented in raw_event below */
map_key_clear(KEY_FILE);
return 1;
+ case 0x00fa: /* Fn-Esc: Fn-lock toggle */
+ map_key_clear(KEY_FN_ESC);
+ return 1;
}
}
&& data[0] == 0x15
&& data[1] == 0x94
&& data[2] == 0x01)) {
- data[1] = 0x0;
- data[2] = 0x4;
+ data[1] = 0x00;
+ data[2] = 0x01;
}
return 0;
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/kfifo.h>
#include <asm/unaligned.h>
#include "hid-ids.h"
-#include "hid-logitech-dj.h"
+
+#define DJ_MAX_PAIRED_DEVICES 6
+#define DJ_MAX_NUMBER_NOTIFICATIONS 8
+#define DJ_RECEIVER_INDEX 0
+#define DJ_DEVICE_INDEX_MIN 1
+#define DJ_DEVICE_INDEX_MAX 6
+
+#define DJREPORT_SHORT_LENGTH 15
+#define DJREPORT_LONG_LENGTH 32
+
+#define REPORT_ID_DJ_SHORT 0x20
+#define REPORT_ID_DJ_LONG 0x21
+
+#define REPORT_ID_HIDPP_SHORT 0x10
+#define REPORT_ID_HIDPP_LONG 0x11
+
+#define HIDPP_REPORT_SHORT_LENGTH 7
+#define HIDPP_REPORT_LONG_LENGTH 20
+
+#define HIDPP_RECEIVER_INDEX 0xff
+
+#define REPORT_TYPE_RFREPORT_FIRST 0x01
+#define REPORT_TYPE_RFREPORT_LAST 0x1F
+
+/* Command Switch to DJ mode */
+#define REPORT_TYPE_CMD_SWITCH 0x80
+#define CMD_SWITCH_PARAM_DEVBITFIELD 0x00
+#define CMD_SWITCH_PARAM_TIMEOUT_SECONDS 0x01
+#define TIMEOUT_NO_KEEPALIVE 0x00
+
+/* Command to Get the list of Paired devices */
+#define REPORT_TYPE_CMD_GET_PAIRED_DEVICES 0x81
+
+/* Device Paired Notification */
+#define REPORT_TYPE_NOTIF_DEVICE_PAIRED 0x41
+#define SPFUNCTION_MORE_NOTIF_EXPECTED 0x01
+#define SPFUNCTION_DEVICE_LIST_EMPTY 0x02
+#define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00
+#define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB 0x01
+#define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB 0x02
+#define DEVICE_PAIRED_RF_REPORT_TYPE 0x03
+
+/* Device Un-Paired Notification */
+#define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED 0x40
+
+
+/* Connection Status Notification */
+#define REPORT_TYPE_NOTIF_CONNECTION_STATUS 0x42
+#define CONNECTION_STATUS_PARAM_STATUS 0x00
+#define STATUS_LINKLOSS 0x01
+
+/* Error Notification */
+#define REPORT_TYPE_NOTIF_ERROR 0x7F
+#define NOTIF_ERROR_PARAM_ETYPE 0x00
+#define ETYPE_KEEPALIVE_TIMEOUT 0x01
+
+/* supported DJ HID && RF report types */
+#define REPORT_TYPE_KEYBOARD 0x01
+#define REPORT_TYPE_MOUSE 0x02
+#define REPORT_TYPE_CONSUMER_CONTROL 0x03
+#define REPORT_TYPE_SYSTEM_CONTROL 0x04
+#define REPORT_TYPE_MEDIA_CENTER 0x08
+#define REPORT_TYPE_LEDS 0x0E
+
+/* RF Report types bitfield */
+#define STD_KEYBOARD 0x00000002
+#define STD_MOUSE 0x00000004
+#define MULTIMEDIA 0x00000008
+#define POWER_KEYS 0x00000010
+#define MEDIA_CENTER 0x00000100
+#define KBD_LEDS 0x00004000
+
+struct dj_report {
+ u8 report_id;
+ u8 device_index;
+ u8 report_type;
+ u8 report_params[DJREPORT_SHORT_LENGTH - 3];
+};
+
+struct dj_receiver_dev {
+ struct hid_device *hdev;
+ struct dj_device *paired_dj_devices[DJ_MAX_PAIRED_DEVICES +
+ DJ_DEVICE_INDEX_MIN];
+ struct work_struct work;
+ struct kfifo notif_fifo;
+ spinlock_t lock;
+ bool querying_devices;
+};
+
+struct dj_device {
+ struct hid_device *hdev;
+ struct dj_receiver_dev *dj_receiver_dev;
+ u32 reports_supported;
+ u8 device_index;
+};
/* Keyboard descriptor (1) */
static const char kbd_descriptor[] = {
0xc0, /* EndCollection */
}; /* */
+/* HIDPP descriptor */
+static const char hidpp_descriptor[] = {
+ 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
+ 0x09, 0x01, /* Usage (Vendor Usage 1) */
+ 0xa1, 0x01, /* Collection (Application) */
+ 0x85, 0x10, /* Report ID (16) */
+ 0x75, 0x08, /* Report Size (8) */
+ 0x95, 0x06, /* Report Count (6) */
+ 0x15, 0x00, /* Logical Minimum (0) */
+ 0x26, 0xff, 0x00, /* Logical Maximum (255) */
+ 0x09, 0x01, /* Usage (Vendor Usage 1) */
+ 0x81, 0x00, /* Input (Data,Arr,Abs) */
+ 0x09, 0x01, /* Usage (Vendor Usage 1) */
+ 0x91, 0x00, /* Output (Data,Arr,Abs) */
+ 0xc0, /* End Collection */
+ 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
+ 0x09, 0x02, /* Usage (Vendor Usage 2) */
+ 0xa1, 0x01, /* Collection (Application) */
+ 0x85, 0x11, /* Report ID (17) */
+ 0x75, 0x08, /* Report Size (8) */
+ 0x95, 0x13, /* Report Count (19) */
+ 0x15, 0x00, /* Logical Minimum (0) */
+ 0x26, 0xff, 0x00, /* Logical Maximum (255) */
+ 0x09, 0x02, /* Usage (Vendor Usage 2) */
+ 0x81, 0x00, /* Input (Data,Arr,Abs) */
+ 0x09, 0x02, /* Usage (Vendor Usage 2) */
+ 0x91, 0x00, /* Output (Data,Arr,Abs) */
+ 0xc0, /* End Collection */
+ 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
+ 0x09, 0x04, /* Usage (Vendor Usage 0x04) */
+ 0xa1, 0x01, /* Collection (Application) */
+ 0x85, 0x20, /* Report ID (32) */
+ 0x75, 0x08, /* Report Size (8) */
+ 0x95, 0x0e, /* Report Count (14) */
+ 0x15, 0x00, /* Logical Minimum (0) */
+ 0x26, 0xff, 0x00, /* Logical Maximum (255) */
+ 0x09, 0x41, /* Usage (Vendor Usage 0x41) */
+ 0x81, 0x00, /* Input (Data,Arr,Abs) */
+ 0x09, 0x41, /* Usage (Vendor Usage 0x41) */
+ 0x91, 0x00, /* Output (Data,Arr,Abs) */
+ 0x85, 0x21, /* Report ID (33) */
+ 0x95, 0x1f, /* Report Count (31) */
+ 0x15, 0x00, /* Logical Minimum (0) */
+ 0x26, 0xff, 0x00, /* Logical Maximum (255) */
+ 0x09, 0x42, /* Usage (Vendor Usage 0x42) */
+ 0x81, 0x00, /* Input (Data,Arr,Abs) */
+ 0x09, 0x42, /* Usage (Vendor Usage 0x42) */
+ 0x91, 0x00, /* Output (Data,Arr,Abs) */
+ 0xc0, /* End Collection */
+};
+
/* Maximum size of all defined hid reports in bytes (including report id) */
#define MAX_REPORT_SIZE 8
sizeof(mse_descriptor) + \
sizeof(consumer_descriptor) + \
sizeof(syscontrol_descriptor) + \
- sizeof(media_descriptor))
+ sizeof(media_descriptor) + \
+ sizeof(hidpp_descriptor))
/* Number of possible hid report types that can be created by this driver.
*
dj_hiddev->dev.parent = &djrcv_hdev->dev;
dj_hiddev->bus = BUS_USB;
dj_hiddev->vendor = le16_to_cpu(usbdev->descriptor.idVendor);
- dj_hiddev->product = le16_to_cpu(usbdev->descriptor.idProduct);
+ dj_hiddev->product =
+ (dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB]
+ << 8) |
+ dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB];
snprintf(dj_hiddev->name, sizeof(dj_hiddev->name),
- "Logitech Unifying Device. Wireless PID:%02x%02x",
- dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB],
- dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB]);
+ "Logitech Unifying Device. Wireless PID:%04x",
+ dj_hiddev->product);
+
+ dj_hiddev->group = HID_GROUP_LOGITECH_DJ_DEVICE;
usb_make_path(usbdev, dj_hiddev->phys, sizeof(dj_hiddev->phys));
snprintf(tmpstr, sizeof(tmpstr), ":%d", dj_report->device_index);
}
}
+static void logi_dj_recv_forward_hidpp(struct dj_device *dj_dev, u8 *data,
+ int size)
+{
+ /* We are called from atomic context (tasklet && djrcv->lock held) */
+ if (hid_input_report(dj_dev->hdev, HID_INPUT_REPORT, data, size, 1))
+ dbg_hid("hid_input_report error\n");
+}
static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
+ struct hid_device *hdev = djrcv_dev->hdev;
struct dj_report *dj_report;
+ u8 *buf;
int retval;
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
- kfree(dj_report);
/*
* Ugly sleep to work around a USB 3.0 bug when the receiver is still
*/
msleep(50);
+ /*
+ * Magical bits to set up hidpp notifications when the dj devices
+ * are connected/disconnected.
+ *
+ * We can reuse dj_report because HIDPP_REPORT_SHORT_LENGTH is smaller
+ * than DJREPORT_SHORT_LENGTH.
+ */
+ buf = (u8 *)dj_report;
+
+ memset(buf, 0, HIDPP_REPORT_SHORT_LENGTH);
+
+ buf[0] = REPORT_ID_HIDPP_SHORT;
+ buf[1] = 0xFF;
+ buf[2] = 0x80;
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+ buf[5] = 0x09;
+ buf[6] = 0x00;
+
+ hid_hw_raw_request(hdev, REPORT_ID_HIDPP_SHORT, buf,
+ HIDPP_REPORT_SHORT_LENGTH, HID_OUTPUT_REPORT,
+ HID_REQ_SET_REPORT);
+
+ kfree(dj_report);
return retval;
}
dbg_hid("%s:%s\n", __func__, hid->phys);
}
+static u8 unifying_name_query[] = {0x10, 0xff, 0x83, 0xb5, 0x40, 0x00, 0x00};
+static u8 unifying_name_answer[] = {0x11, 0xff, 0x83, 0xb5};
+
static int logi_dj_ll_raw_request(struct hid_device *hid,
unsigned char reportnum, __u8 *buf,
size_t count, unsigned char report_type,
u8 *out_buf;
int ret;
+ if ((buf[0] == REPORT_ID_HIDPP_SHORT) ||
+ (buf[0] == REPORT_ID_HIDPP_LONG)) {
+ if (count < 2)
+ return -EINVAL;
+
+ /* special case where we should not overwrite
+ * the device_index */
+ if (count == 7 && !memcmp(buf, unifying_name_query,
+ sizeof(unifying_name_query)))
+ buf[4] |= djdev->device_index - 1;
+ else
+ buf[1] = djdev->device_index;
+ return hid_hw_raw_request(djrcv_dev->hdev, reportnum, buf,
+ count, report_type, reqtype);
+ }
+
if (buf[0] != REPORT_TYPE_LEDS)
return -EINVAL;
__func__, djdev->reports_supported);
}
+ rdcat(rdesc, &rsize, hidpp_descriptor, sizeof(hidpp_descriptor));
+
retval = hid_parse_report(hid, rdesc, rsize);
kfree(rdesc);
.raw_request = logi_dj_ll_raw_request,
};
-
-static int logi_dj_raw_event(struct hid_device *hdev,
+static int logi_dj_dj_event(struct hid_device *hdev,
struct hid_report *report, u8 *data,
int size)
{
struct dj_report *dj_report = (struct dj_report *) data;
unsigned long flags;
- dbg_hid("%s, size:%d\n", __func__, size);
-
- /* Here we receive all data coming from iface 2, there are 4 cases:
- *
- * 1) Data should continue its normal processing i.e. data does not
- * come from the DJ collection, in which case we do nothing and
- * return 0, so hid-core can continue normal processing (will forward
- * to associated hidraw device)
+ /*
+ * Here we receive all data coming from iface 2, there are 3 cases:
*
- * 2) Data is from DJ collection, and is intended for this driver i. e.
- * data contains arrival, departure, etc notifications, in which case
- * we queue them for delayed processing by the work queue. We return 1
- * to hid-core as no further processing is required from it.
+ * 1) Data is intended for this driver i. e. data contains arrival,
+ * departure, etc notifications, in which case we queue them for delayed
+ * processing by the work queue. We return 1 to hid-core as no further
+ * processing is required from it.
*
- * 3) Data is from DJ collection, and informs a connection change,
- * if the change means rf link loss, then we must send a null report
- * to the upper layer to discard potentially pressed keys that may be
- * repeated forever by the input layer. Return 1 to hid-core as no
- * further processing is required.
+ * 2) Data informs a connection change, if the change means rf link
+ * loss, then we must send a null report to the upper layer to discard
+ * potentially pressed keys that may be repeated forever by the input
+ * layer. Return 1 to hid-core as no further processing is required.
*
- * 4) Data is from DJ collection and is an actual input event from
- * a paired DJ device in which case we forward it to the correct hid
- * device (via hid_input_report() ) and return 1 so hid-core does not do
- * anything else with it.
+ * 3) Data is an actual input event from a paired DJ device in which
+ * case we forward it to the correct hid device (via hid_input_report()
+ * ) and return 1 so hid-core does not anything else with it.
*/
- /* case 1) */
- if (data[0] != REPORT_ID_DJ_SHORT)
- return false;
-
if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
(dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
/*
return true;
}
+static int logi_dj_hidpp_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *data,
+ int size)
+{
+ struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
+ struct dj_report *dj_report = (struct dj_report *) data;
+ unsigned long flags;
+ u8 device_index = dj_report->device_index;
+
+ if (device_index == HIDPP_RECEIVER_INDEX) {
+ /* special case were the device wants to know its unifying
+ * name */
+ if (size == HIDPP_REPORT_LONG_LENGTH &&
+ !memcmp(data, unifying_name_answer,
+ sizeof(unifying_name_answer)) &&
+ ((data[4] & 0xF0) == 0x40))
+ device_index = (data[4] & 0x0F) + 1;
+ else
+ return false;
+ }
+
+ /*
+ * Data is from the HID++ collection, in this case, we forward the
+ * data to the corresponding child dj device and return 0 to hid-core
+ * so he data also goes to the hidraw device of the receiver. This
+ * allows a user space application to implement the full HID++ routing
+ * via the receiver.
+ */
+
+ if ((device_index < DJ_DEVICE_INDEX_MIN) ||
+ (device_index > DJ_DEVICE_INDEX_MAX)) {
+ /*
+ * Device index is wrong, bail out.
+ * This driver can ignore safely the receiver notifications,
+ * so ignore those reports too.
+ */
+ dev_err(&hdev->dev, "%s: invalid device index:%d\n",
+ __func__, dj_report->device_index);
+ return false;
+ }
+
+ spin_lock_irqsave(&djrcv_dev->lock, flags);
+
+ if (!djrcv_dev->paired_dj_devices[device_index])
+ /* received an event for an unknown device, bail out */
+ goto out;
+
+ logi_dj_recv_forward_hidpp(djrcv_dev->paired_dj_devices[device_index],
+ data, size);
+
+out:
+ spin_unlock_irqrestore(&djrcv_dev->lock, flags);
+
+ return false;
+}
+
+static int logi_dj_raw_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *data,
+ int size)
+{
+ dbg_hid("%s, size:%d\n", __func__, size);
+
+ switch (data[0]) {
+ case REPORT_ID_DJ_SHORT:
+ return logi_dj_dj_event(hdev, report, data, size);
+ case REPORT_ID_HIDPP_SHORT:
+ /* intentional fallthrough */
+ case REPORT_ID_HIDPP_LONG:
+ return logi_dj_hidpp_event(hdev, report, data, size);
+ }
+
+ return false;
+}
+
static int logi_dj_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
struct dj_receiver_dev *djrcv_dev;
int retval;
- if (is_dj_device((struct dj_device *)hdev->driver_data))
- return -ENODEV;
-
dbg_hid("%s called for ifnum %d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
hid_set_drvdata(hdev, NULL);
}
-static int logi_djdevice_probe(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- int ret;
- struct dj_device *dj_dev = hdev->driver_data;
-
- if (!is_dj_device(dj_dev))
- return -ENODEV;
-
- ret = hid_parse(hdev);
- if (!ret)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
-
- return ret;
-}
-
static const struct hid_device_id logi_dj_receivers[] = {
{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER)},
#endif
};
+module_hid_driver(logi_djreceiver_driver);
-static const struct hid_device_id logi_dj_devices[] = {
- {HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
- USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER)},
- {HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
- USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2)},
- {}
-};
-
-static struct hid_driver logi_djdevice_driver = {
- .name = "logitech-djdevice",
- .id_table = logi_dj_devices,
- .probe = logi_djdevice_probe,
-};
-
-
-static int __init logi_dj_init(void)
-{
- int retval;
-
- dbg_hid("Logitech-DJ:%s\n", __func__);
-
- retval = hid_register_driver(&logi_djreceiver_driver);
- if (retval)
- return retval;
-
- retval = hid_register_driver(&logi_djdevice_driver);
- if (retval)
- hid_unregister_driver(&logi_djreceiver_driver);
-
- return retval;
-
-}
-
-static void __exit logi_dj_exit(void)
-{
- dbg_hid("Logitech-DJ:%s\n", __func__);
-
- hid_unregister_driver(&logi_djdevice_driver);
- hid_unregister_driver(&logi_djreceiver_driver);
-
-}
-
-module_init(logi_dj_init);
-module_exit(logi_dj_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Logitech");
MODULE_AUTHOR("Nestor Lopez Casado");
+++ /dev/null
-#ifndef __HID_LOGITECH_DJ_H
-#define __HID_LOGITECH_DJ_H
-
-/*
- * HID driver for Logitech Unifying receivers
- *
- * Copyright (c) 2011 Logitech
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/kfifo.h>
-
-#define DJ_MAX_PAIRED_DEVICES 6
-#define DJ_MAX_NUMBER_NOTIFICATIONS 8
-#define DJ_RECEIVER_INDEX 0
-#define DJ_DEVICE_INDEX_MIN 1
-#define DJ_DEVICE_INDEX_MAX 6
-
-#define DJREPORT_SHORT_LENGTH 15
-#define DJREPORT_LONG_LENGTH 32
-
-#define REPORT_ID_DJ_SHORT 0x20
-#define REPORT_ID_DJ_LONG 0x21
-
-#define REPORT_TYPE_RFREPORT_FIRST 0x01
-#define REPORT_TYPE_RFREPORT_LAST 0x1F
-
-/* Command Switch to DJ mode */
-#define REPORT_TYPE_CMD_SWITCH 0x80
-#define CMD_SWITCH_PARAM_DEVBITFIELD 0x00
-#define CMD_SWITCH_PARAM_TIMEOUT_SECONDS 0x01
-#define TIMEOUT_NO_KEEPALIVE 0x00
-
-/* Command to Get the list of Paired devices */
-#define REPORT_TYPE_CMD_GET_PAIRED_DEVICES 0x81
-
-/* Device Paired Notification */
-#define REPORT_TYPE_NOTIF_DEVICE_PAIRED 0x41
-#define SPFUNCTION_MORE_NOTIF_EXPECTED 0x01
-#define SPFUNCTION_DEVICE_LIST_EMPTY 0x02
-#define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00
-#define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB 0x01
-#define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB 0x02
-#define DEVICE_PAIRED_RF_REPORT_TYPE 0x03
-
-/* Device Un-Paired Notification */
-#define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED 0x40
-
-
-/* Connection Status Notification */
-#define REPORT_TYPE_NOTIF_CONNECTION_STATUS 0x42
-#define CONNECTION_STATUS_PARAM_STATUS 0x00
-#define STATUS_LINKLOSS 0x01
-
-/* Error Notification */
-#define REPORT_TYPE_NOTIF_ERROR 0x7F
-#define NOTIF_ERROR_PARAM_ETYPE 0x00
-#define ETYPE_KEEPALIVE_TIMEOUT 0x01
-
-/* supported DJ HID && RF report types */
-#define REPORT_TYPE_KEYBOARD 0x01
-#define REPORT_TYPE_MOUSE 0x02
-#define REPORT_TYPE_CONSUMER_CONTROL 0x03
-#define REPORT_TYPE_SYSTEM_CONTROL 0x04
-#define REPORT_TYPE_MEDIA_CENTER 0x08
-#define REPORT_TYPE_LEDS 0x0E
-
-/* RF Report types bitfield */
-#define STD_KEYBOARD 0x00000002
-#define STD_MOUSE 0x00000004
-#define MULTIMEDIA 0x00000008
-#define POWER_KEYS 0x00000010
-#define MEDIA_CENTER 0x00000100
-#define KBD_LEDS 0x00004000
-
-struct dj_report {
- u8 report_id;
- u8 device_index;
- u8 report_type;
- u8 report_params[DJREPORT_SHORT_LENGTH - 3];
-};
-
-struct dj_receiver_dev {
- struct hid_device *hdev;
- struct dj_device *paired_dj_devices[DJ_MAX_PAIRED_DEVICES +
- DJ_DEVICE_INDEX_MIN];
- struct work_struct work;
- struct kfifo notif_fifo;
- spinlock_t lock;
- bool querying_devices;
-};
-
-struct dj_device {
- struct hid_device *hdev;
- struct dj_receiver_dev *dj_receiver_dev;
- u32 reports_supported;
- u8 device_index;
-};
-
-/**
- * is_dj_device - know if the given dj_device is not the receiver.
- * @dj_dev: the dj device to test
- *
- * This macro tests if a struct dj_device pointer is a device created
- * by the bus enumarator.
- */
-#define is_dj_device(dj_dev) \
- (&(dj_dev)->dj_receiver_dev->hdev->dev == (dj_dev)->hdev->dev.parent)
-
-#endif
--- /dev/null
+/*
+ * HIDPP protocol for Logitech Unifying receivers
+ *
+ * Copyright (c) 2011 Logitech (c)
+ * Copyright (c) 2012-2013 Google (c)
+ * Copyright (c) 2013-2014 Red Hat Inc.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/kfifo.h>
+#include <linux/input/mt.h>
+#include <asm/unaligned.h>
+#include "hid-ids.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+MODULE_AUTHOR("Nestor Lopez Casado <nlopezcasad@logitech.com>");
+
+#define REPORT_ID_HIDPP_SHORT 0x10
+#define REPORT_ID_HIDPP_LONG 0x11
+
+#define HIDPP_REPORT_SHORT_LENGTH 7
+#define HIDPP_REPORT_LONG_LENGTH 20
+
+#define HIDPP_QUIRK_CLASS_WTP BIT(0)
+
+/* bits 1..20 are reserved for classes */
+#define HIDPP_QUIRK_DELAYED_INIT BIT(21)
+#define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS BIT(22)
+#define HIDPP_QUIRK_MULTI_INPUT BIT(23)
+
+/*
+ * There are two hidpp protocols in use, the first version hidpp10 is known
+ * as register access protocol or RAP, the second version hidpp20 is known as
+ * feature access protocol or FAP
+ *
+ * Most older devices (including the Unifying usb receiver) use the RAP protocol
+ * where as most newer devices use the FAP protocol. Both protocols are
+ * compatible with the underlying transport, which could be usb, Unifiying, or
+ * bluetooth. The message lengths are defined by the hid vendor specific report
+ * descriptor for the HIDPP_SHORT report type (total message lenth 7 bytes) and
+ * the HIDPP_LONG report type (total message length 20 bytes)
+ *
+ * The RAP protocol uses both report types, whereas the FAP only uses HIDPP_LONG
+ * messages. The Unifying receiver itself responds to RAP messages (device index
+ * is 0xFF for the receiver), and all messages (short or long) with a device
+ * index between 1 and 6 are passed untouched to the corresponding paired
+ * Unifying device.
+ *
+ * The paired device can be RAP or FAP, it will receive the message untouched
+ * from the Unifiying receiver.
+ */
+
+struct fap {
+ u8 feature_index;
+ u8 funcindex_clientid;
+ u8 params[HIDPP_REPORT_LONG_LENGTH - 4U];
+};
+
+struct rap {
+ u8 sub_id;
+ u8 reg_address;
+ u8 params[HIDPP_REPORT_LONG_LENGTH - 4U];
+};
+
+struct hidpp_report {
+ u8 report_id;
+ u8 device_index;
+ union {
+ struct fap fap;
+ struct rap rap;
+ u8 rawbytes[sizeof(struct fap)];
+ };
+} __packed;
+
+struct hidpp_device {
+ struct hid_device *hid_dev;
+ struct mutex send_mutex;
+ void *send_receive_buf;
+ wait_queue_head_t wait;
+ bool answer_available;
+ u8 protocol_major;
+ u8 protocol_minor;
+
+ void *private_data;
+
+ struct work_struct work;
+ struct kfifo delayed_work_fifo;
+ atomic_t connected;
+ struct input_dev *delayed_input;
+
+ unsigned long quirks;
+};
+
+
+#define HIDPP_ERROR 0x8f
+#define HIDPP_ERROR_SUCCESS 0x00
+#define HIDPP_ERROR_INVALID_SUBID 0x01
+#define HIDPP_ERROR_INVALID_ADRESS 0x02
+#define HIDPP_ERROR_INVALID_VALUE 0x03
+#define HIDPP_ERROR_CONNECT_FAIL 0x04
+#define HIDPP_ERROR_TOO_MANY_DEVICES 0x05
+#define HIDPP_ERROR_ALREADY_EXISTS 0x06
+#define HIDPP_ERROR_BUSY 0x07
+#define HIDPP_ERROR_UNKNOWN_DEVICE 0x08
+#define HIDPP_ERROR_RESOURCE_ERROR 0x09
+#define HIDPP_ERROR_REQUEST_UNAVAILABLE 0x0a
+#define HIDPP_ERROR_INVALID_PARAM_VALUE 0x0b
+#define HIDPP_ERROR_WRONG_PIN_CODE 0x0c
+
+static void hidpp_connect_event(struct hidpp_device *hidpp_dev);
+
+static int __hidpp_send_report(struct hid_device *hdev,
+ struct hidpp_report *hidpp_report)
+{
+ int fields_count, ret;
+
+ switch (hidpp_report->report_id) {
+ case REPORT_ID_HIDPP_SHORT:
+ fields_count = HIDPP_REPORT_SHORT_LENGTH;
+ break;
+ case REPORT_ID_HIDPP_LONG:
+ fields_count = HIDPP_REPORT_LONG_LENGTH;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ /*
+ * set the device_index as the receiver, it will be overwritten by
+ * hid_hw_request if needed
+ */
+ hidpp_report->device_index = 0xff;
+
+ ret = hid_hw_raw_request(hdev, hidpp_report->report_id,
+ (u8 *)hidpp_report, fields_count, HID_OUTPUT_REPORT,
+ HID_REQ_SET_REPORT);
+
+ return ret == fields_count ? 0 : -1;
+}
+
+/**
+ * hidpp_send_message_sync() returns 0 in case of success, and something else
+ * in case of a failure.
+ * - If ' something else' is positive, that means that an error has been raised
+ * by the protocol itself.
+ * - If ' something else' is negative, that means that we had a classic error
+ * (-ENOMEM, -EPIPE, etc...)
+ */
+static int hidpp_send_message_sync(struct hidpp_device *hidpp,
+ struct hidpp_report *message,
+ struct hidpp_report *response)
+{
+ int ret;
+
+ mutex_lock(&hidpp->send_mutex);
+
+ hidpp->send_receive_buf = response;
+ hidpp->answer_available = false;
+
+ /*
+ * So that we can later validate the answer when it arrives
+ * in hidpp_raw_event
+ */
+ *response = *message;
+
+ ret = __hidpp_send_report(hidpp->hid_dev, message);
+
+ if (ret) {
+ dbg_hid("__hidpp_send_report returned err: %d\n", ret);
+ memset(response, 0, sizeof(struct hidpp_report));
+ goto exit;
+ }
+
+ if (!wait_event_timeout(hidpp->wait, hidpp->answer_available,
+ 5*HZ)) {
+ dbg_hid("%s:timeout waiting for response\n", __func__);
+ memset(response, 0, sizeof(struct hidpp_report));
+ ret = -ETIMEDOUT;
+ }
+
+ if (response->report_id == REPORT_ID_HIDPP_SHORT &&
+ response->fap.feature_index == HIDPP_ERROR) {
+ ret = response->fap.params[1];
+ dbg_hid("__hidpp_send_report got hidpp error %02X\n", ret);
+ goto exit;
+ }
+
+exit:
+ mutex_unlock(&hidpp->send_mutex);
+ return ret;
+
+}
+
+static int hidpp_send_fap_command_sync(struct hidpp_device *hidpp,
+ u8 feat_index, u8 funcindex_clientid, u8 *params, int param_count,
+ struct hidpp_report *response)
+{
+ struct hidpp_report *message;
+ int ret;
+
+ if (param_count > sizeof(message->fap.params))
+ return -EINVAL;
+
+ message = kzalloc(sizeof(struct hidpp_report), GFP_KERNEL);
+ if (!message)
+ return -ENOMEM;
+ message->report_id = REPORT_ID_HIDPP_LONG;
+ message->fap.feature_index = feat_index;
+ message->fap.funcindex_clientid = funcindex_clientid;
+ memcpy(&message->fap.params, params, param_count);
+
+ ret = hidpp_send_message_sync(hidpp, message, response);
+ kfree(message);
+ return ret;
+}
+
+static int hidpp_send_rap_command_sync(struct hidpp_device *hidpp_dev,
+ u8 report_id, u8 sub_id, u8 reg_address, u8 *params, int param_count,
+ struct hidpp_report *response)
+{
+ struct hidpp_report *message;
+ int ret;
+
+ if ((report_id != REPORT_ID_HIDPP_SHORT) &&
+ (report_id != REPORT_ID_HIDPP_LONG))
+ return -EINVAL;
+
+ if (param_count > sizeof(message->rap.params))
+ return -EINVAL;
+
+ message = kzalloc(sizeof(struct hidpp_report), GFP_KERNEL);
+ if (!message)
+ return -ENOMEM;
+ message->report_id = report_id;
+ message->rap.sub_id = sub_id;
+ message->rap.reg_address = reg_address;
+ memcpy(&message->rap.params, params, param_count);
+
+ ret = hidpp_send_message_sync(hidpp_dev, message, response);
+ kfree(message);
+ return ret;
+}
+
+static void delayed_work_cb(struct work_struct *work)
+{
+ struct hidpp_device *hidpp = container_of(work, struct hidpp_device,
+ work);
+ hidpp_connect_event(hidpp);
+}
+
+static inline bool hidpp_match_answer(struct hidpp_report *question,
+ struct hidpp_report *answer)
+{
+ return (answer->fap.feature_index == question->fap.feature_index) &&
+ (answer->fap.funcindex_clientid == question->fap.funcindex_clientid);
+}
+
+static inline bool hidpp_match_error(struct hidpp_report *question,
+ struct hidpp_report *answer)
+{
+ return (answer->fap.feature_index == HIDPP_ERROR) &&
+ (answer->fap.funcindex_clientid == question->fap.feature_index) &&
+ (answer->fap.params[0] == question->fap.funcindex_clientid);
+}
+
+static inline bool hidpp_report_is_connect_event(struct hidpp_report *report)
+{
+ return (report->report_id == REPORT_ID_HIDPP_SHORT) &&
+ (report->rap.sub_id == 0x41);
+}
+
+/* -------------------------------------------------------------------------- */
+/* HIDP++ 1.0 commands */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_SET_REGISTER 0x80
+#define HIDPP_GET_REGISTER 0x81
+#define HIDPP_SET_LONG_REGISTER 0x82
+#define HIDPP_GET_LONG_REGISTER 0x83
+
+#define HIDPP_REG_PAIRING_INFORMATION 0xB5
+#define DEVICE_NAME 0x40
+
+static char *hidpp_get_unifying_name(struct hidpp_device *hidpp_dev)
+{
+ struct hidpp_report response;
+ int ret;
+ /* hid-logitech-dj is in charge of setting the right device index */
+ u8 params[1] = { DEVICE_NAME };
+ char *name;
+ int len;
+
+ ret = hidpp_send_rap_command_sync(hidpp_dev,
+ REPORT_ID_HIDPP_SHORT,
+ HIDPP_GET_LONG_REGISTER,
+ HIDPP_REG_PAIRING_INFORMATION,
+ params, 1, &response);
+ if (ret)
+ return NULL;
+
+ len = response.rap.params[1];
+
+ if (2 + len > sizeof(response.rap.params))
+ return NULL;
+
+ name = kzalloc(len + 1, GFP_KERNEL);
+ if (!name)
+ return NULL;
+
+ memcpy(name, &response.rap.params[2], len);
+ return name;
+}
+
+/* -------------------------------------------------------------------------- */
+/* 0x0000: Root */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_ROOT 0x0000
+#define HIDPP_PAGE_ROOT_IDX 0x00
+
+#define CMD_ROOT_GET_FEATURE 0x01
+#define CMD_ROOT_GET_PROTOCOL_VERSION 0x11
+
+static int hidpp_root_get_feature(struct hidpp_device *hidpp, u16 feature,
+ u8 *feature_index, u8 *feature_type)
+{
+ struct hidpp_report response;
+ int ret;
+ u8 params[2] = { feature >> 8, feature & 0x00FF };
+
+ ret = hidpp_send_fap_command_sync(hidpp,
+ HIDPP_PAGE_ROOT_IDX,
+ CMD_ROOT_GET_FEATURE,
+ params, 2, &response);
+ if (ret)
+ return ret;
+
+ *feature_index = response.fap.params[0];
+ *feature_type = response.fap.params[1];
+
+ return ret;
+}
+
+static int hidpp_root_get_protocol_version(struct hidpp_device *hidpp)
+{
+ struct hidpp_report response;
+ int ret;
+
+ ret = hidpp_send_fap_command_sync(hidpp,
+ HIDPP_PAGE_ROOT_IDX,
+ CMD_ROOT_GET_PROTOCOL_VERSION,
+ NULL, 0, &response);
+
+ if (ret == HIDPP_ERROR_INVALID_SUBID) {
+ hidpp->protocol_major = 1;
+ hidpp->protocol_minor = 0;
+ return 0;
+ }
+
+ /* the device might not be connected */
+ if (ret == HIDPP_ERROR_RESOURCE_ERROR)
+ return -EIO;
+
+ if (ret > 0) {
+ hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+ __func__, ret);
+ return -EPROTO;
+ }
+ if (ret)
+ return ret;
+
+ hidpp->protocol_major = response.fap.params[0];
+ hidpp->protocol_minor = response.fap.params[1];
+
+ return ret;
+}
+
+static bool hidpp_is_connected(struct hidpp_device *hidpp)
+{
+ int ret;
+
+ ret = hidpp_root_get_protocol_version(hidpp);
+ if (!ret)
+ hid_dbg(hidpp->hid_dev, "HID++ %u.%u device connected.\n",
+ hidpp->protocol_major, hidpp->protocol_minor);
+ return ret == 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* 0x0005: GetDeviceNameType */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_GET_DEVICE_NAME_TYPE 0x0005
+
+#define CMD_GET_DEVICE_NAME_TYPE_GET_COUNT 0x01
+#define CMD_GET_DEVICE_NAME_TYPE_GET_DEVICE_NAME 0x11
+#define CMD_GET_DEVICE_NAME_TYPE_GET_TYPE 0x21
+
+static int hidpp_devicenametype_get_count(struct hidpp_device *hidpp,
+ u8 feature_index, u8 *nameLength)
+{
+ struct hidpp_report response;
+ int ret;
+
+ ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+ CMD_GET_DEVICE_NAME_TYPE_GET_COUNT, NULL, 0, &response);
+
+ if (ret > 0) {
+ hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+ __func__, ret);
+ return -EPROTO;
+ }
+ if (ret)
+ return ret;
+
+ *nameLength = response.fap.params[0];
+
+ return ret;
+}
+
+static int hidpp_devicenametype_get_device_name(struct hidpp_device *hidpp,
+ u8 feature_index, u8 char_index, char *device_name, int len_buf)
+{
+ struct hidpp_report response;
+ int ret, i;
+ int count;
+
+ ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+ CMD_GET_DEVICE_NAME_TYPE_GET_DEVICE_NAME, &char_index, 1,
+ &response);
+
+ if (ret > 0) {
+ hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+ __func__, ret);
+ return -EPROTO;
+ }
+ if (ret)
+ return ret;
+
+ if (response.report_id == REPORT_ID_HIDPP_LONG)
+ count = HIDPP_REPORT_LONG_LENGTH - 4;
+ else
+ count = HIDPP_REPORT_SHORT_LENGTH - 4;
+
+ if (len_buf < count)
+ count = len_buf;
+
+ for (i = 0; i < count; i++)
+ device_name[i] = response.fap.params[i];
+
+ return count;
+}
+
+static char *hidpp_get_device_name(struct hidpp_device *hidpp)
+{
+ u8 feature_type;
+ u8 feature_index;
+ u8 __name_length;
+ char *name;
+ unsigned index = 0;
+ int ret;
+
+ ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_GET_DEVICE_NAME_TYPE,
+ &feature_index, &feature_type);
+ if (ret)
+ return NULL;
+
+ ret = hidpp_devicenametype_get_count(hidpp, feature_index,
+ &__name_length);
+ if (ret)
+ return NULL;
+
+ name = kzalloc(__name_length + 1, GFP_KERNEL);
+ if (!name)
+ return NULL;
+
+ while (index < __name_length) {
+ ret = hidpp_devicenametype_get_device_name(hidpp,
+ feature_index, index, name + index,
+ __name_length - index);
+ if (ret <= 0) {
+ kfree(name);
+ return NULL;
+ }
+ index += ret;
+ }
+
+ return name;
+}
+
+/* -------------------------------------------------------------------------- */
+/* 0x6100: TouchPadRawXY */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_TOUCHPAD_RAW_XY 0x6100
+
+#define CMD_TOUCHPAD_GET_RAW_INFO 0x01
+#define CMD_TOUCHPAD_SET_RAW_REPORT_STATE 0x21
+
+#define EVENT_TOUCHPAD_RAW_XY 0x00
+
+#define TOUCHPAD_RAW_XY_ORIGIN_LOWER_LEFT 0x01
+#define TOUCHPAD_RAW_XY_ORIGIN_UPPER_LEFT 0x03
+
+struct hidpp_touchpad_raw_info {
+ u16 x_size;
+ u16 y_size;
+ u8 z_range;
+ u8 area_range;
+ u8 timestamp_unit;
+ u8 maxcontacts;
+ u8 origin;
+ u16 res;
+};
+
+struct hidpp_touchpad_raw_xy_finger {
+ u8 contact_type;
+ u8 contact_status;
+ u16 x;
+ u16 y;
+ u8 z;
+ u8 area;
+ u8 finger_id;
+};
+
+struct hidpp_touchpad_raw_xy {
+ u16 timestamp;
+ struct hidpp_touchpad_raw_xy_finger fingers[2];
+ u8 spurious_flag;
+ u8 end_of_frame;
+ u8 finger_count;
+ u8 button;
+};
+
+static int hidpp_touchpad_get_raw_info(struct hidpp_device *hidpp,
+ u8 feature_index, struct hidpp_touchpad_raw_info *raw_info)
+{
+ struct hidpp_report response;
+ int ret;
+ u8 *params = (u8 *)response.fap.params;
+
+ ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+ CMD_TOUCHPAD_GET_RAW_INFO, NULL, 0, &response);
+
+ if (ret > 0) {
+ hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+ __func__, ret);
+ return -EPROTO;
+ }
+ if (ret)
+ return ret;
+
+ raw_info->x_size = get_unaligned_be16(¶ms[0]);
+ raw_info->y_size = get_unaligned_be16(¶ms[2]);
+ raw_info->z_range = params[4];
+ raw_info->area_range = params[5];
+ raw_info->maxcontacts = params[7];
+ raw_info->origin = params[8];
+ /* res is given in unit per inch */
+ raw_info->res = get_unaligned_be16(¶ms[13]) * 2 / 51;
+
+ return ret;
+}
+
+static int hidpp_touchpad_set_raw_report_state(struct hidpp_device *hidpp_dev,
+ u8 feature_index, bool send_raw_reports,
+ bool sensor_enhanced_settings)
+{
+ struct hidpp_report response;
+
+ /*
+ * Params:
+ * bit 0 - enable raw
+ * bit 1 - 16bit Z, no area
+ * bit 2 - enhanced sensitivity
+ * bit 3 - width, height (4 bits each) instead of area
+ * bit 4 - send raw + gestures (degrades smoothness)
+ * remaining bits - reserved
+ */
+ u8 params = send_raw_reports | (sensor_enhanced_settings << 2);
+
+ return hidpp_send_fap_command_sync(hidpp_dev, feature_index,
+ CMD_TOUCHPAD_SET_RAW_REPORT_STATE, ¶ms, 1, &response);
+}
+
+static void hidpp_touchpad_touch_event(u8 *data,
+ struct hidpp_touchpad_raw_xy_finger *finger)
+{
+ u8 x_m = data[0] << 2;
+ u8 y_m = data[2] << 2;
+
+ finger->x = x_m << 6 | data[1];
+ finger->y = y_m << 6 | data[3];
+
+ finger->contact_type = data[0] >> 6;
+ finger->contact_status = data[2] >> 6;
+
+ finger->z = data[4];
+ finger->area = data[5];
+ finger->finger_id = data[6] >> 4;
+}
+
+static void hidpp_touchpad_raw_xy_event(struct hidpp_device *hidpp_dev,
+ u8 *data, struct hidpp_touchpad_raw_xy *raw_xy)
+{
+ memset(raw_xy, 0, sizeof(struct hidpp_touchpad_raw_xy));
+ raw_xy->end_of_frame = data[8] & 0x01;
+ raw_xy->spurious_flag = (data[8] >> 1) & 0x01;
+ raw_xy->finger_count = data[15] & 0x0f;
+ raw_xy->button = (data[8] >> 2) & 0x01;
+
+ if (raw_xy->finger_count) {
+ hidpp_touchpad_touch_event(&data[2], &raw_xy->fingers[0]);
+ hidpp_touchpad_touch_event(&data[9], &raw_xy->fingers[1]);
+ }
+}
+
+/* ************************************************************************** */
+/* */
+/* Device Support */
+/* */
+/* ************************************************************************** */
+
+/* -------------------------------------------------------------------------- */
+/* Touchpad HID++ devices */
+/* -------------------------------------------------------------------------- */
+
+#define WTP_MANUAL_RESOLUTION 39
+
+struct wtp_data {
+ struct input_dev *input;
+ u16 x_size, y_size;
+ u8 finger_count;
+ u8 mt_feature_index;
+ u8 button_feature_index;
+ u8 maxcontacts;
+ bool flip_y;
+ unsigned int resolution;
+};
+
+static int wtp_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+
+ if ((hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) &&
+ (field->application == HID_GD_KEYBOARD))
+ return 0;
+
+ return -1;
+}
+
+static void wtp_populate_input(struct hidpp_device *hidpp,
+ struct input_dev *input_dev, bool origin_is_hid_core)
+{
+ struct wtp_data *wd = hidpp->private_data;
+
+ if ((hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT) && origin_is_hid_core)
+ /* this is the generic hid-input call */
+ return;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __clear_bit(EV_REL, input_dev->evbit);
+ __clear_bit(EV_LED, input_dev->evbit);
+
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, wd->x_size, 0, 0);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_X, wd->resolution);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, wd->y_size, 0, 0);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_Y, wd->resolution);
+
+ /* Max pressure is not given by the devices, pick one */
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 50, 0, 0);
+
+ input_set_capability(input_dev, EV_KEY, BTN_LEFT);
+
+ if (hidpp->quirks & HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS)
+ input_set_capability(input_dev, EV_KEY, BTN_RIGHT);
+ else
+ __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+ input_mt_init_slots(input_dev, wd->maxcontacts, INPUT_MT_POINTER |
+ INPUT_MT_DROP_UNUSED);
+
+ wd->input = input_dev;
+}
+
+static void wtp_touch_event(struct wtp_data *wd,
+ struct hidpp_touchpad_raw_xy_finger *touch_report)
+{
+ int slot;
+
+ if (!touch_report->finger_id || touch_report->contact_type)
+ /* no actual data */
+ return;
+
+ slot = input_mt_get_slot_by_key(wd->input, touch_report->finger_id);
+
+ input_mt_slot(wd->input, slot);
+ input_mt_report_slot_state(wd->input, MT_TOOL_FINGER,
+ touch_report->contact_status);
+ if (touch_report->contact_status) {
+ input_event(wd->input, EV_ABS, ABS_MT_POSITION_X,
+ touch_report->x);
+ input_event(wd->input, EV_ABS, ABS_MT_POSITION_Y,
+ wd->flip_y ? wd->y_size - touch_report->y :
+ touch_report->y);
+ input_event(wd->input, EV_ABS, ABS_MT_PRESSURE,
+ touch_report->area);
+ }
+}
+
+static void wtp_send_raw_xy_event(struct hidpp_device *hidpp,
+ struct hidpp_touchpad_raw_xy *raw)
+{
+ struct wtp_data *wd = hidpp->private_data;
+ int i;
+
+ for (i = 0; i < 2; i++)
+ wtp_touch_event(wd, &(raw->fingers[i]));
+
+ if (raw->end_of_frame &&
+ !(hidpp->quirks & HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS))
+ input_event(wd->input, EV_KEY, BTN_LEFT, raw->button);
+
+ if (raw->end_of_frame || raw->finger_count <= 2) {
+ input_mt_sync_frame(wd->input);
+ input_sync(wd->input);
+ }
+}
+
+static int wtp_mouse_raw_xy_event(struct hidpp_device *hidpp, u8 *data)
+{
+ struct wtp_data *wd = hidpp->private_data;
+ u8 c1_area = ((data[7] & 0xf) * (data[7] & 0xf) +
+ (data[7] >> 4) * (data[7] >> 4)) / 2;
+ u8 c2_area = ((data[13] & 0xf) * (data[13] & 0xf) +
+ (data[13] >> 4) * (data[13] >> 4)) / 2;
+ struct hidpp_touchpad_raw_xy raw = {
+ .timestamp = data[1],
+ .fingers = {
+ {
+ .contact_type = 0,
+ .contact_status = !!data[7],
+ .x = get_unaligned_le16(&data[3]),
+ .y = get_unaligned_le16(&data[5]),
+ .z = c1_area,
+ .area = c1_area,
+ .finger_id = data[2],
+ }, {
+ .contact_type = 0,
+ .contact_status = !!data[13],
+ .x = get_unaligned_le16(&data[9]),
+ .y = get_unaligned_le16(&data[11]),
+ .z = c2_area,
+ .area = c2_area,
+ .finger_id = data[8],
+ }
+ },
+ .finger_count = wd->maxcontacts,
+ .spurious_flag = 0,
+ .end_of_frame = (data[0] >> 7) == 0,
+ .button = data[0] & 0x01,
+ };
+
+ wtp_send_raw_xy_event(hidpp, &raw);
+
+ return 1;
+}
+
+static int wtp_raw_event(struct hid_device *hdev, u8 *data, int size)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+ struct wtp_data *wd = hidpp->private_data;
+ struct hidpp_report *report = (struct hidpp_report *)data;
+ struct hidpp_touchpad_raw_xy raw;
+
+ if (!wd || !wd->input)
+ return 1;
+
+ switch (data[0]) {
+ case 0x02:
+ if (hidpp->quirks & HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS) {
+ input_event(wd->input, EV_KEY, BTN_LEFT,
+ !!(data[1] & 0x01));
+ input_event(wd->input, EV_KEY, BTN_RIGHT,
+ !!(data[1] & 0x02));
+ input_sync(wd->input);
+ } else {
+ if (size < 21)
+ return 1;
+ return wtp_mouse_raw_xy_event(hidpp, &data[7]);
+ }
+ case REPORT_ID_HIDPP_LONG:
+ if ((report->fap.feature_index != wd->mt_feature_index) ||
+ (report->fap.funcindex_clientid != EVENT_TOUCHPAD_RAW_XY))
+ return 1;
+ hidpp_touchpad_raw_xy_event(hidpp, data + 4, &raw);
+
+ wtp_send_raw_xy_event(hidpp, &raw);
+ return 0;
+ }
+
+ return 0;
+}
+
+static int wtp_get_config(struct hidpp_device *hidpp)
+{
+ struct wtp_data *wd = hidpp->private_data;
+ struct hidpp_touchpad_raw_info raw_info = {0};
+ u8 feature_type;
+ int ret;
+
+ ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_TOUCHPAD_RAW_XY,
+ &wd->mt_feature_index, &feature_type);
+ if (ret)
+ /* means that the device is not powered up */
+ return ret;
+
+ ret = hidpp_touchpad_get_raw_info(hidpp, wd->mt_feature_index,
+ &raw_info);
+ if (ret)
+ return ret;
+
+ wd->x_size = raw_info.x_size;
+ wd->y_size = raw_info.y_size;
+ wd->maxcontacts = raw_info.maxcontacts;
+ wd->flip_y = raw_info.origin == TOUCHPAD_RAW_XY_ORIGIN_LOWER_LEFT;
+ wd->resolution = raw_info.res;
+ if (!wd->resolution)
+ wd->resolution = WTP_MANUAL_RESOLUTION;
+
+ return 0;
+}
+
+static int wtp_allocate(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+ struct wtp_data *wd;
+
+ wd = devm_kzalloc(&hdev->dev, sizeof(struct wtp_data),
+ GFP_KERNEL);
+ if (!wd)
+ return -ENOMEM;
+
+ hidpp->private_data = wd;
+
+ return 0;
+};
+
+static void wtp_connect(struct hid_device *hdev, bool connected)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+ struct wtp_data *wd = hidpp->private_data;
+ int ret;
+
+ if (!connected)
+ return;
+
+ if (!wd->x_size) {
+ ret = wtp_get_config(hidpp);
+ if (ret) {
+ hid_err(hdev, "Can not get wtp config: %d\n", ret);
+ return;
+ }
+ }
+
+ hidpp_touchpad_set_raw_report_state(hidpp, wd->mt_feature_index,
+ true, true);
+}
+
+/* -------------------------------------------------------------------------- */
+/* Generic HID++ devices */
+/* -------------------------------------------------------------------------- */
+
+static int hidpp_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)
+ return wtp_input_mapping(hdev, hi, field, usage, bit, max);
+
+ return 0;
+}
+
+static void hidpp_populate_input(struct hidpp_device *hidpp,
+ struct input_dev *input, bool origin_is_hid_core)
+{
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)
+ wtp_populate_input(hidpp, input, origin_is_hid_core);
+}
+
+static void hidpp_input_configured(struct hid_device *hdev,
+ struct hid_input *hidinput)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+ struct input_dev *input = hidinput->input;
+
+ hidpp_populate_input(hidpp, input, true);
+}
+
+static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
+ int size)
+{
+ struct hidpp_report *question = hidpp->send_receive_buf;
+ struct hidpp_report *answer = hidpp->send_receive_buf;
+ struct hidpp_report *report = (struct hidpp_report *)data;
+
+ /*
+ * If the mutex is locked then we have a pending answer from a
+ * previoulsly sent command
+ */
+ if (unlikely(mutex_is_locked(&hidpp->send_mutex))) {
+ /*
+ * Check for a correct hidpp20 answer or the corresponding
+ * error
+ */
+ if (hidpp_match_answer(question, report) ||
+ hidpp_match_error(question, report)) {
+ *answer = *report;
+ hidpp->answer_available = true;
+ wake_up(&hidpp->wait);
+ /*
+ * This was an answer to a command that this driver sent
+ * We return 1 to hid-core to avoid forwarding the
+ * command upstream as it has been treated by the driver
+ */
+
+ return 1;
+ }
+ }
+
+ if (unlikely(hidpp_report_is_connect_event(report))) {
+ atomic_set(&hidpp->connected,
+ !(report->rap.params[0] & (1 << 6)));
+ if ((hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) &&
+ (schedule_work(&hidpp->work) == 0))
+ dbg_hid("%s: connect event already queued\n", __func__);
+ return 1;
+ }
+
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)
+ return wtp_raw_event(hidpp->hid_dev, data, size);
+
+ return 0;
+}
+
+static int hidpp_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+
+ switch (data[0]) {
+ case REPORT_ID_HIDPP_LONG:
+ if (size != HIDPP_REPORT_LONG_LENGTH) {
+ hid_err(hdev, "received hid++ report of bad size (%d)",
+ size);
+ return 1;
+ }
+ return hidpp_raw_hidpp_event(hidpp, data, size);
+ case REPORT_ID_HIDPP_SHORT:
+ if (size != HIDPP_REPORT_SHORT_LENGTH) {
+ hid_err(hdev, "received hid++ report of bad size (%d)",
+ size);
+ return 1;
+ }
+ return hidpp_raw_hidpp_event(hidpp, data, size);
+ }
+
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)
+ return wtp_raw_event(hdev, data, size);
+
+ return 0;
+}
+
+static void hidpp_overwrite_name(struct hid_device *hdev, bool use_unifying)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+ char *name;
+
+ if (use_unifying)
+ /*
+ * the device is connected through an Unifying receiver, and
+ * might not be already connected.
+ * Ask the receiver for its name.
+ */
+ name = hidpp_get_unifying_name(hidpp);
+ else
+ name = hidpp_get_device_name(hidpp);
+
+ if (!name)
+ hid_err(hdev, "unable to retrieve the name of the device");
+ else
+ snprintf(hdev->name, sizeof(hdev->name), "%s", name);
+
+ kfree(name);
+}
+
+static int hidpp_input_open(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ return hid_hw_open(hid);
+}
+
+static void hidpp_input_close(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ hid_hw_close(hid);
+}
+
+static struct input_dev *hidpp_allocate_input(struct hid_device *hdev)
+{
+ struct input_dev *input_dev = devm_input_allocate_device(&hdev->dev);
+
+ if (!input_dev)
+ return NULL;
+
+ input_set_drvdata(input_dev, hdev);
+ input_dev->open = hidpp_input_open;
+ input_dev->close = hidpp_input_close;
+
+ input_dev->name = hdev->name;
+ input_dev->phys = hdev->phys;
+ input_dev->uniq = hdev->uniq;
+ input_dev->id.bustype = hdev->bus;
+ input_dev->id.vendor = hdev->vendor;
+ input_dev->id.product = hdev->product;
+ input_dev->id.version = hdev->version;
+ input_dev->dev.parent = &hdev->dev;
+
+ return input_dev;
+}
+
+static void hidpp_connect_event(struct hidpp_device *hidpp)
+{
+ struct hid_device *hdev = hidpp->hid_dev;
+ int ret = 0;
+ bool connected = atomic_read(&hidpp->connected);
+ struct input_dev *input;
+ char *name, *devm_name;
+
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)
+ wtp_connect(hdev, connected);
+
+ if (!connected || hidpp->delayed_input)
+ return;
+
+ if (!hidpp->protocol_major) {
+ ret = !hidpp_is_connected(hidpp);
+ if (ret) {
+ hid_err(hdev, "Can not get the protocol version.\n");
+ return;
+ }
+ }
+
+ /* the device is already connected, we can ask for its name and
+ * protocol */
+ hid_info(hdev, "HID++ %u.%u device connected.\n",
+ hidpp->protocol_major, hidpp->protocol_minor);
+
+ input = hidpp_allocate_input(hdev);
+ if (!input) {
+ hid_err(hdev, "cannot allocate new input device: %d\n", ret);
+ return;
+ }
+
+ name = hidpp_get_device_name(hidpp);
+ if (!name) {
+ hid_err(hdev, "unable to retrieve the name of the device");
+ } else {
+ devm_name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s", name);
+ if (devm_name)
+ input->name = devm_name;
+ kfree(name);
+ }
+
+ hidpp_populate_input(hidpp, input, false);
+
+ ret = input_register_device(input);
+ if (ret)
+ input_free_device(input);
+
+ hidpp->delayed_input = input;
+}
+
+static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct hidpp_device *hidpp;
+ int ret;
+ bool connected;
+ unsigned int connect_mask = HID_CONNECT_DEFAULT;
+
+ hidpp = devm_kzalloc(&hdev->dev, sizeof(struct hidpp_device),
+ GFP_KERNEL);
+ if (!hidpp)
+ return -ENOMEM;
+
+ hidpp->hid_dev = hdev;
+ hid_set_drvdata(hdev, hidpp);
+
+ hidpp->quirks = id->driver_data;
+
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
+ ret = wtp_allocate(hdev, id);
+ if (ret)
+ goto wtp_allocate_fail;
+ }
+
+ INIT_WORK(&hidpp->work, delayed_work_cb);
+ mutex_init(&hidpp->send_mutex);
+ init_waitqueue_head(&hidpp->wait);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "%s:parse failed\n", __func__);
+ goto hid_parse_fail;
+ }
+
+ /* Allow incoming packets */
+ hid_device_io_start(hdev);
+
+ connected = hidpp_is_connected(hidpp);
+ if (id->group != HID_GROUP_LOGITECH_DJ_DEVICE) {
+ if (!connected) {
+ hid_err(hdev, "Device not connected");
+ hid_device_io_stop(hdev);
+ goto hid_parse_fail;
+ }
+
+ hid_info(hdev, "HID++ %u.%u device connected.\n",
+ hidpp->protocol_major, hidpp->protocol_minor);
+ }
+
+ hidpp_overwrite_name(hdev, id->group == HID_GROUP_LOGITECH_DJ_DEVICE);
+ atomic_set(&hidpp->connected, connected);
+
+ if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
+ ret = wtp_get_config(hidpp);
+ if (ret)
+ goto hid_parse_fail;
+ }
+
+ /* Block incoming packets */
+ hid_device_io_stop(hdev);
+
+ if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
+ connect_mask &= ~HID_CONNECT_HIDINPUT;
+
+ /* Re-enable hidinput for multi-input devices */
+ if (hidpp->quirks & HIDPP_QUIRK_MULTI_INPUT)
+ connect_mask |= HID_CONNECT_HIDINPUT;
+
+ ret = hid_hw_start(hdev, connect_mask);
+ if (ret) {
+ hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
+ goto hid_hw_start_fail;
+ }
+
+ if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) {
+ /* Allow incoming packets */
+ hid_device_io_start(hdev);
+
+ hidpp_connect_event(hidpp);
+ }
+
+ return ret;
+
+hid_hw_start_fail:
+hid_parse_fail:
+ cancel_work_sync(&hidpp->work);
+ mutex_destroy(&hidpp->send_mutex);
+wtp_allocate_fail:
+ hid_set_drvdata(hdev, NULL);
+ return ret;
+}
+
+static void hidpp_remove(struct hid_device *hdev)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+
+ cancel_work_sync(&hidpp->work);
+ mutex_destroy(&hidpp->send_mutex);
+ hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id hidpp_devices[] = {
+ { /* wireless touchpad */
+ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
+ USB_VENDOR_ID_LOGITECH, 0x4011),
+ .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT |
+ HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS },
+ { /* wireless touchpad T650 */
+ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
+ USB_VENDOR_ID_LOGITECH, 0x4101),
+ .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT },
+ { /* wireless touchpad T651 */
+ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_T651),
+ .driver_data = HIDPP_QUIRK_CLASS_WTP },
+ { /* Keyboard TK820 */
+ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
+ USB_VENDOR_ID_LOGITECH, 0x4102),
+ .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_MULTI_INPUT |
+ HIDPP_QUIRK_CLASS_WTP },
+
+ { HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
+ USB_VENDOR_ID_LOGITECH, HID_ANY_ID)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(hid, hidpp_devices);
+
+static struct hid_driver hidpp_driver = {
+ .name = "logitech-hidpp-device",
+ .id_table = hidpp_devices,
+ .probe = hidpp_probe,
+ .remove = hidpp_remove,
+ .raw_event = hidpp_raw_event,
+ .input_configured = hidpp_input_configured,
+ .input_mapping = hidpp_input_mapping,
+};
+
+module_hid_driver(hidpp_driver);
.driver_data = MS_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
.driver_data = MS_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3),
+ .driver_data = MS_HIDINPUT },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT),
.driver_data = MS_PRESENTER },
#define MT_QUIRK_IGNORE_DUPLICATES (1 << 10)
#define MT_QUIRK_HOVERING (1 << 11)
#define MT_QUIRK_CONTACT_CNT_ACCURATE (1 << 12)
+#define MT_QUIRK_FORCE_GET_FEATURE (1 << 13)
#define MT_INPUTMODE_TOUCHSCREEN 0x02
#define MT_INPUTMODE_TOUCHPAD 0x03
#define MT_CLS_FLATFROG 0x0107
#define MT_CLS_GENERALTOUCH_TWOFINGERS 0x0108
#define MT_CLS_GENERALTOUCH_PWT_TENFINGERS 0x0109
+#define MT_CLS_VTL 0x0110
#define MT_DEFAULT_MAXCONTACT 10
#define MT_MAX_MAXCONTACT 250
.sn_move = 2048,
.maxcontacts = 40,
},
+ { .name = MT_CLS_VTL,
+ .quirks = MT_QUIRK_ALWAYS_VALID |
+ MT_QUIRK_CONTACT_CNT_ACCURATE |
+ MT_QUIRK_FORCE_GET_FEATURE,
+ },
{ }
};
struct mt_device *td = hid_get_drvdata(hdev);
struct hid_report *r;
struct hid_report_enum *re;
+ struct mt_class *cls = &td->mtclass;
+ char *buf;
+ int report_len;
if (td->inputmode < 0)
return;
re = &(hdev->report_enum[HID_FEATURE_REPORT]);
r = re->report_id_hash[td->inputmode];
if (r) {
+ if (cls->quirks & MT_QUIRK_FORCE_GET_FEATURE) {
+ report_len = hid_report_len(r);
+ buf = hid_alloc_report_buf(r, GFP_KERNEL);
+ if (!buf) {
+ hid_err(hdev, "failed to allocate buffer for report\n");
+ return;
+ }
+ hid_hw_raw_request(hdev, r->id, buf, report_len,
+ HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
+ kfree(buf);
+ }
r->field[0]->value[td->inputmode_index] = td->inputmode_value;
hid_hw_request(hdev, r, HID_REQ_SET_REPORT);
}
MT_USB_DEVICE(USB_VENDOR_ID_UNITEC,
USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
+ /* VTL panels */
+ { .driver_data = MT_CLS_VTL,
+ MT_USB_DEVICE(USB_VENDOR_ID_VTL,
+ USB_DEVICE_ID_VTL_MULTITOUCH_FF3F) },
+
/* Wistron panels */
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_WISTRON,
bool has_query10 = false;
bool has_query11;
bool has_query12;
+ bool has_query27;
+ bool has_query28;
+ bool has_query36 = false;
bool has_physical_props;
bool has_gestures;
bool has_rel;
+ bool has_data40 = false;
unsigned x_size, y_size;
- u16 query12_offset;
+ u16 query_offset;
if (!data->f11.query_base_addr) {
hid_err(hdev, "No 2D sensor found, giving up.\n");
has_query9 = !!(buf[0] & BIT(3));
has_query11 = !!(buf[0] & BIT(4));
has_query12 = !!(buf[0] & BIT(5));
+ has_query27 = !!(buf[0] & BIT(6));
+ has_query28 = !!(buf[0] & BIT(7));
/* query 1 to get the max number of fingers */
ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
has_rel = !!(buf[0] & BIT(3));
has_gestures = !!(buf[0] & BIT(5));
+ /*
+ * At least 4 queries are guaranteed to be present in F11
+ * +1 for query 5 which is present since absolute events are
+ * reported and +1 for query 12.
+ */
+ query_offset = 6;
+
+ if (has_rel)
+ ++query_offset; /* query 6 is present */
+
if (has_gestures) {
/* query 8 to find out if query 10 exists */
- ret = rmi_read(hdev, data->f11.query_base_addr + 8, buf);
+ ret = rmi_read(hdev,
+ data->f11.query_base_addr + query_offset + 1, buf);
if (ret) {
hid_err(hdev, "can not read gesture information: %d.\n",
ret);
return ret;
}
has_query10 = !!(buf[0] & BIT(2));
- }
- /*
- * At least 4 queries are guaranteed to be present in F11
- * +1 for query 5 which is present since absolute events are
- * reported and +1 for query 12.
- */
- query12_offset = 6;
-
- if (has_rel)
- ++query12_offset; /* query 6 is present */
-
- if (has_gestures)
- query12_offset += 2; /* query 7 and 8 are present */
+ query_offset += 2; /* query 7 and 8 are present */
+ }
if (has_query9)
- ++query12_offset;
+ ++query_offset;
if (has_query10)
- ++query12_offset;
+ ++query_offset;
if (has_query11)
- ++query12_offset;
+ ++query_offset;
/* query 12 to know if the physical properties are reported */
if (has_query12) {
ret = rmi_read(hdev, data->f11.query_base_addr
- + query12_offset, buf);
+ + query_offset, buf);
if (ret) {
hid_err(hdev, "can not get query 12: %d.\n", ret);
return ret;
has_physical_props = !!(buf[0] & BIT(5));
if (has_physical_props) {
+ query_offset += 1;
ret = rmi_read_block(hdev,
data->f11.query_base_addr
- + query12_offset + 1, buf, 4);
+ + query_offset, buf, 4);
if (ret) {
hid_err(hdev, "can not read query 15-18: %d.\n",
ret);
hid_info(hdev, "%s: size in mm: %d x %d\n",
__func__, data->x_size_mm, data->y_size_mm);
+
+ /*
+ * query 15 - 18 contain the size of the sensor
+ * and query 19 - 26 contain bezel dimensions
+ */
+ query_offset += 12;
+ }
+ }
+
+ if (has_query27)
+ ++query_offset;
+
+ if (has_query28) {
+ ret = rmi_read(hdev, data->f11.query_base_addr
+ + query_offset, buf);
+ if (ret) {
+ hid_err(hdev, "can not get query 28: %d.\n", ret);
+ return ret;
+ }
+
+ has_query36 = !!(buf[0] & BIT(6));
+ }
+
+ if (has_query36) {
+ query_offset += 2;
+ ret = rmi_read(hdev, data->f11.query_base_addr
+ + query_offset, buf);
+ if (ret) {
+ hid_err(hdev, "can not get query 36: %d.\n", ret);
+ return ret;
}
+
+ has_data40 = !!(buf[0] & BIT(5));
}
+
+ if (has_data40)
+ data->f11.report_size += data->max_fingers * 2;
+
/*
* retrieve the ctrl registers
* the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
static void kone_profile_report(struct kone_device *kone, uint new_profile)
{
struct kone_roccat_report roccat_report;
+
roccat_report.event = kone_mouse_event_switch_profile;
roccat_report.value = new_profile;
roccat_report.key = 0;
struct kone_settings const *settings)
{
int retval;
+
retval = kone_send(usb_dev, kone_command_settings,
settings, sizeof(struct kone_settings));
if (retval)
.read = kone_sysfs_read_profilex, \
.write = kone_sysfs_write_profilex, \
.private = &profile_numbers[number-1], \
-};
+}
PROFILE_ATTR(1);
PROFILE_ATTR(2);
PROFILE_ATTR(3);
static int kone_tcu_command(struct usb_device *usb_dev, int number)
{
unsigned char value;
+
value = number;
return kone_send(usb_dev, kone_command_calibrate, &value, 1);
}
== USB_INTERFACE_PROTOCOL_MOUSE) {
kone = kzalloc(sizeof(*kone), GFP_KERNEL);
- if (!kone) {
- hid_err(hdev, "can't alloc device descriptor\n");
+ if (!kone)
return -ENOMEM;
- }
hid_set_drvdata(hdev, kone);
retval = kone_init_kone_device_struct(usb_dev, kone);
* (This module is based on "hid-ortek".)
* Copyright (c) 2012 Andreas Hübner
*
- * R.A.T.7, M.M.O.7 (USB gaming mice):
+ * R.A.T.7, R.A.T.9, M.M.O.7 (USB gaming mice):
* Fixes the mode button which cycles through three constantly pressed
* buttons. All three press events are mapped to one button and the
* missing release event is generated immediately.
.driver_data = SAITEK_FIX_PS1000 },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7),
.driver_data = SAITEK_RELEASE_MODE_RAT7 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9),
+ .driver_data = SAITEK_RELEASE_MODE_RAT7 },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7),
.driver_data = SAITEK_RELEASE_MODE_MMO7 },
{ }
__u8 buf[36];
};
+#define DS4_REPORT_0x02_SIZE 37
+#define DS4_REPORT_0x05_SIZE 32
+#define DS4_REPORT_0x11_SIZE 78
+#define DS4_REPORT_0x81_SIZE 7
+#define SIXAXIS_REPORT_0xF2_SIZE 18
+
static spinlock_t sony_dev_list_lock;
static LIST_HEAD(sony_device_list);
static DEFINE_IDA(sony_device_id_allocator);
struct work_struct state_worker;
struct power_supply battery;
int device_id;
+ __u8 *output_report_dmabuf;
#ifdef CONFIG_SONY_FF
__u8 left;
static int sixaxis_set_operational_bt(struct hid_device *hdev)
{
- unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
- return hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+ static const __u8 report[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
+ __u8 *buf;
+ int ret;
+
+ buf = kmemdup(report, sizeof(report), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(report),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+
+ kfree(buf);
+
+ return ret;
}
/*
*/
static int dualshock4_set_operational_bt(struct hid_device *hdev)
{
- __u8 buf[37] = { 0 };
+ __u8 *buf;
+ int ret;
+
+ buf = kmalloc(DS4_REPORT_0x02_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
- return hid_hw_raw_request(hdev, 0x02, buf, sizeof(buf),
+ ret = hid_hw_raw_request(hdev, 0x02, buf, DS4_REPORT_0x02_SIZE,
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+
+ kfree(buf);
+
+ return ret;
}
static void sixaxis_set_leds_from_id(int id, __u8 values[MAX_LEDS])
static void sixaxis_state_worker(struct work_struct *work)
{
- struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
- int n;
- union sixaxis_output_report_01 report = {
+ static const union sixaxis_output_report_01 default_report = {
.buf = {
0x01,
0x00, 0xff, 0x00, 0xff, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00
}
};
+ struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
+ struct sixaxis_output_report *report =
+ (struct sixaxis_output_report *)sc->output_report_dmabuf;
+ int n;
+
+ /* Initialize the report with default values */
+ memcpy(report, &default_report, sizeof(struct sixaxis_output_report));
#ifdef CONFIG_SONY_FF
- report.data.rumble.right_motor_on = sc->right ? 1 : 0;
- report.data.rumble.left_motor_force = sc->left;
+ report->rumble.right_motor_on = sc->right ? 1 : 0;
+ report->rumble.left_motor_force = sc->left;
#endif
- report.data.leds_bitmap |= sc->led_state[0] << 1;
- report.data.leds_bitmap |= sc->led_state[1] << 2;
- report.data.leds_bitmap |= sc->led_state[2] << 3;
- report.data.leds_bitmap |= sc->led_state[3] << 4;
+ report->leds_bitmap |= sc->led_state[0] << 1;
+ report->leds_bitmap |= sc->led_state[1] << 2;
+ report->leds_bitmap |= sc->led_state[2] << 3;
+ report->leds_bitmap |= sc->led_state[3] << 4;
/* Set flag for all leds off, required for 3rd party INTEC controller */
- if ((report.data.leds_bitmap & 0x1E) == 0)
- report.data.leds_bitmap |= 0x20;
+ if ((report->leds_bitmap & 0x1E) == 0)
+ report->leds_bitmap |= 0x20;
/*
* The LEDs in the report are indexed in reverse order to their
*/
for (n = 0; n < 4; n++) {
if (sc->led_delay_on[n] || sc->led_delay_off[n]) {
- report.data.led[3 - n].duty_off = sc->led_delay_off[n];
- report.data.led[3 - n].duty_on = sc->led_delay_on[n];
+ report->led[3 - n].duty_off = sc->led_delay_off[n];
+ report->led[3 - n].duty_on = sc->led_delay_on[n];
}
}
- hid_hw_raw_request(sc->hdev, report.data.report_id, report.buf,
- sizeof(report), HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
+ hid_hw_raw_request(sc->hdev, report->report_id, (__u8 *)report,
+ sizeof(struct sixaxis_output_report),
+ HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
}
static void dualshock4_state_worker(struct work_struct *work)
{
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
struct hid_device *hdev = sc->hdev;
+ __u8 *buf = sc->output_report_dmabuf;
int offset;
- __u8 buf[78] = { 0 };
-
if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
+ memset(buf, 0, DS4_REPORT_0x05_SIZE);
buf[0] = 0x05;
buf[1] = 0xFF;
offset = 4;
} else {
+ memset(buf, 0, DS4_REPORT_0x11_SIZE);
buf[0] = 0x11;
buf[1] = 0xB0;
buf[3] = 0x0F;
buf[offset++] = sc->led_delay_off[3];
if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
- hid_hw_output_report(hdev, buf, 32);
+ hid_hw_output_report(hdev, buf, DS4_REPORT_0x05_SIZE);
else
- hid_hw_raw_request(hdev, 0x11, buf, 78,
+ hid_hw_raw_request(hdev, 0x11, buf, DS4_REPORT_0x11_SIZE,
HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
}
+static int sony_allocate_output_report(struct sony_sc *sc)
+{
+ if (sc->quirks & SIXAXIS_CONTROLLER)
+ sc->output_report_dmabuf =
+ kmalloc(sizeof(union sixaxis_output_report_01),
+ GFP_KERNEL);
+ else if (sc->quirks & DUALSHOCK4_CONTROLLER_BT)
+ sc->output_report_dmabuf = kmalloc(DS4_REPORT_0x11_SIZE,
+ GFP_KERNEL);
+ else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
+ sc->output_report_dmabuf = kmalloc(DS4_REPORT_0x05_SIZE,
+ GFP_KERNEL);
+ else
+ return 0;
+
+ if (!sc->output_report_dmabuf)
+ return -ENOMEM;
+
+ return 0;
+}
+
#ifdef CONFIG_SONY_FF
static int sony_play_effect(struct input_dev *dev, void *data,
struct ff_effect *effect)
static int sony_check_add(struct sony_sc *sc)
{
+ __u8 *buf = NULL;
int n, ret;
if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) ||
return 0;
}
} else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
- __u8 buf[7];
+ buf = kmalloc(DS4_REPORT_0x81_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
/*
* The MAC address of a DS4 controller connected via USB can be
* retrieved with feature report 0x81. The address begins at
* offset 1.
*/
- ret = hid_hw_raw_request(sc->hdev, 0x81, buf, sizeof(buf),
- HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ ret = hid_hw_raw_request(sc->hdev, 0x81, buf,
+ DS4_REPORT_0x81_SIZE, HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
- if (ret != 7) {
+ if (ret != DS4_REPORT_0x81_SIZE) {
hid_err(sc->hdev, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n");
- return ret < 0 ? ret : -EINVAL;
+ ret = ret < 0 ? ret : -EINVAL;
+ goto out_free;
}
memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address));
} else if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
- __u8 buf[18];
+ buf = kmalloc(SIXAXIS_REPORT_0xF2_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
/*
* The MAC address of a Sixaxis controller connected via USB can
* be retrieved with feature report 0xf2. The address begins at
* offset 4.
*/
- ret = hid_hw_raw_request(sc->hdev, 0xf2, buf, sizeof(buf),
- HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ ret = hid_hw_raw_request(sc->hdev, 0xf2, buf,
+ SIXAXIS_REPORT_0xF2_SIZE, HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
- if (ret != 18) {
+ if (ret != SIXAXIS_REPORT_0xF2_SIZE) {
hid_err(sc->hdev, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n");
- return ret < 0 ? ret : -EINVAL;
+ ret = ret < 0 ? ret : -EINVAL;
+ goto out_free;
}
/*
return 0;
}
- return sony_check_add_dev_list(sc);
+ ret = sony_check_add_dev_list(sc);
+
+out_free:
+
+ kfree(buf);
+
+ return ret;
}
static int sony_set_device_id(struct sony_sc *sc)
return ret;
}
+ ret = sony_allocate_output_report(sc);
+ if (ret < 0) {
+ hid_err(hdev, "failed to allocate the output report buffer\n");
+ goto err_stop;
+ }
+
ret = sony_set_device_id(sc);
if (ret < 0) {
hid_err(hdev, "failed to allocate the device id\n");
if (sc->quirks & SONY_BATTERY_SUPPORT)
sony_battery_remove(sc);
sony_cancel_work_sync(sc);
+ kfree(sc->output_report_dmabuf);
sony_remove_dev_list(sc);
sony_release_device_id(sc);
hid_hw_stop(hdev);
sony_cancel_work_sync(sc);
+ kfree(sc->output_report_dmabuf);
+
sony_remove_dev_list(sc);
sony_release_device_id(sc);
/* Logitech Harmony Adapter for PS3 */
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3),
.driver_data = PS3REMOTE },
+ /* SMK-Link PS3 BD Remote Control */
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_PS3_BDREMOTE),
+ .driver_data = PS3REMOTE },
/* Sony Dualshock 4 controllers for PS4 */
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
.driver_data = DUALSHOCK4_CONTROLLER_USB },
* descriptor. */
unsigned int bufsize; /* i2c buffer size */
char *inbuf; /* Input buffer */
+ char *rawbuf; /* Raw Input buffer */
char *cmdbuf; /* Command buffer */
char *argsbuf; /* Command arguments buffer */
static void i2c_hid_get_input(struct i2c_hid *ihid)
{
int ret, ret_size;
- int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
+ int size = ihid->bufsize;
ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
if (ret != size) {
report->id, buffer, size))
return;
- i2c_hid_dbg(ihid, "report (len=%d): %*ph\n", size, size, ihid->inbuf);
+ i2c_hid_dbg(ihid, "report (len=%d): %*ph\n", size, size, buffer);
ret_size = buffer[0] | (buffer[1] << 8);
static void i2c_hid_free_buffers(struct i2c_hid *ihid)
{
kfree(ihid->inbuf);
+ kfree(ihid->rawbuf);
kfree(ihid->argsbuf);
kfree(ihid->cmdbuf);
ihid->inbuf = NULL;
+ ihid->rawbuf = NULL;
ihid->cmdbuf = NULL;
ihid->argsbuf = NULL;
ihid->bufsize = 0;
report_size; /* report */
ihid->inbuf = kzalloc(report_size, GFP_KERNEL);
+ ihid->rawbuf = kzalloc(report_size, GFP_KERNEL);
ihid->argsbuf = kzalloc(args_len, GFP_KERNEL);
ihid->cmdbuf = kzalloc(sizeof(union command) + args_len, GFP_KERNEL);
- if (!ihid->inbuf || !ihid->argsbuf || !ihid->cmdbuf) {
+ if (!ihid->inbuf || !ihid->rawbuf || !ihid->argsbuf || !ihid->cmdbuf) {
i2c_hid_free_buffers(ihid);
return -ENOMEM;
}
ret = i2c_hid_get_report(client,
report_type == HID_FEATURE_REPORT ? 0x03 : 0x01,
- report_number, ihid->inbuf, ask_count);
+ report_number, ihid->rawbuf, ask_count);
if (ret < 0)
return ret;
- ret_count = ihid->inbuf[0] | (ihid->inbuf[1] << 8);
+ ret_count = ihid->rawbuf[0] | (ihid->rawbuf[1] << 8);
if (ret_count <= 2)
return 0;
/* The query buffer contains the size, dropping it in the reply */
count = min(count, ret_count - 2);
- memcpy(buf, ihid->inbuf + 2, count);
+ memcpy(buf, ihid->rawbuf + 2, count);
return count;
}
usbhid->retry_delay = 0;
if ((hid->quirks & HID_QUIRK_ALWAYS_POLL) && !hid->open)
break;
- hid_input_report(urb->context, HID_INPUT_REPORT,
- urb->transfer_buffer,
- urb->actual_length, 1);
- /*
- * autosuspend refused while keys are pressed
- * because most keyboards don't wake up when
- * a key is released
- */
- if (hid_check_keys_pressed(hid))
- set_bit(HID_KEYS_PRESSED, &usbhid->iofl);
- else
- clear_bit(HID_KEYS_PRESSED, &usbhid->iofl);
+ if (!test_bit(HID_RESUME_RUNNING, &usbhid->iofl)) {
+ hid_input_report(urb->context, HID_INPUT_REPORT,
+ urb->transfer_buffer,
+ urb->actual_length, 1);
+ /*
+ * autosuspend refused while keys are pressed
+ * because most keyboards don't wake up when
+ * a key is released
+ */
+ if (hid_check_keys_pressed(hid))
+ set_bit(HID_KEYS_PRESSED, &usbhid->iofl);
+ else
+ clear_bit(HID_KEYS_PRESSED, &usbhid->iofl);
+ }
break;
case -EPIPE: /* stall */
usbhid_mark_busy(usbhid);
report = usbhid->out[usbhid->outtail].report;
raw_report = usbhid->out[usbhid->outtail].raw_report;
- usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) +
- 1 + (report->id > 0);
+ usbhid->urbout->transfer_buffer_length = hid_report_len(report);
usbhid->urbout->dev = hid_to_usb_dev(hid);
if (raw_report) {
memcpy(usbhid->outbuf, raw_report,
goto done;
}
usbhid->intf->needs_remote_wakeup = 1;
+ set_bit(HID_RESUME_RUNNING, &usbhid->iofl);
res = hid_start_in(hid);
if (res) {
if (res != -ENOSPC) {
}
}
usb_autopm_put_interface(usbhid->intf);
+
+ /*
+ * In case events are generated while nobody was listening,
+ * some are released when the device is re-opened.
+ * Wait 50 msec for the queue to empty before allowing events
+ * to go through hid.
+ */
+ msleep(50);
+ clear_bit(HID_RESUME_RUNNING, &usbhid->iofl);
}
done:
mutex_unlock(&hid_open_mut);
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN_009B, HID_QUIRK_ALWAYS_POLL },
+ { USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN_0103, HID_QUIRK_ALWAYS_POLL },
+ { USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN_010c, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN_016F, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
#define HID_STARTED 8
#define HID_KEYS_PRESSED 10
#define HID_NO_BANDWIDTH 11
+#define HID_RESUME_RUNNING 12
/*
* USB-specific HID struct, to be pointed to
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
void wacom_setup_device_quirks(struct wacom_features *features);
-int wacom_setup_input_capabilities(struct input_dev *input_dev,
+int wacom_setup_pentouch_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac);
int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac);
#include "wacom_wac.h"
#include "wacom.h"
+#include <linux/input/mt.h>
#define WAC_MSG_RETRIES 5
static int wacom_open(struct input_dev *dev)
{
struct wacom *wacom = input_get_drvdata(dev);
- int retval;
-
- mutex_lock(&wacom->lock);
- retval = hid_hw_open(wacom->hdev);
- mutex_unlock(&wacom->lock);
- return retval;
+ return hid_hw_open(wacom->hdev);
}
static void wacom_close(struct input_dev *dev)
{
struct wacom *wacom = input_get_drvdata(dev);
- mutex_lock(&wacom->lock);
hid_hw_close(wacom->hdev);
- mutex_unlock(&wacom->lock);
}
/*
if (!pen && !finger)
return;
- if (finger && !features->touch_max)
- /* touch device at least supports one touch point */
- features->touch_max = 1;
+ /*
+ * Bamboo models do not support HID_DG_CONTACTMAX.
+ * And, Bamboo Pen only descriptor contains touch.
+ */
+ if (features->type != BAMBOO_PT) {
+ /* ISDv4 touch devices at least supports one touch point */
+ if (finger && !features->touch_max)
+ features->touch_max = 1;
+ }
switch (usage->hid) {
case HID_GD_X:
wacom_wac_usage_mapping(hdev, field, usage);
}
+static void wacom_post_parse_hid(struct hid_device *hdev,
+ struct wacom_features *features)
+{
+ struct wacom *wacom = hid_get_drvdata(hdev);
+ struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+
+ if (features->type == HID_GENERIC) {
+ /* Any last-minute generic device setup */
+ if (features->touch_max > 1) {
+ input_mt_init_slots(wacom_wac->input, wacom_wac->features.touch_max,
+ INPUT_MT_DIRECT);
+ }
+ }
+}
+
static void wacom_parse_hid(struct hid_device *hdev,
struct wacom_features *features)
{
wacom_usage_mapping(hdev, hreport->field[i],
hreport->field[i]->usage + j);
}
+
+ wacom_post_parse_hid(hdev, features);
}
static int wacom_hid_set_device_mode(struct hid_device *hdev)
input_free_device(wacom->wacom_wac.input);
}
if (wacom->wacom_wac.pad_input) {
- if (wacom->wacom_wac.input_registered)
+ if (wacom->wacom_wac.pad_registered)
input_unregister_device(wacom->wacom_wac.pad_input);
else
input_free_device(wacom->wacom_wac.pad_input);
if (!input_dev || !pad_input_dev)
return -EINVAL;
- error = wacom_setup_input_capabilities(input_dev, wacom_wac);
- if (error)
- return error;
-
- error = input_register_device(input_dev);
- if (error)
- return error;
+ error = wacom_setup_pentouch_input_capabilities(input_dev, wacom_wac);
+ if (!error) {
+ error = input_register_device(input_dev);
+ if (error)
+ return error;
+ wacom_wac->input_registered = true;
+ }
error = wacom_setup_pad_input_capabilities(pad_input_dev, wacom_wac);
if (error) {
error = input_register_device(pad_input_dev);
if (error)
goto fail_register_pad_input;
+ wacom_wac->pad_registered = true;
error = wacom_initialize_leds(wacom);
if (error)
goto fail_leds;
}
- wacom_wac->input_registered = true;
-
return 0;
fail_leds:
input_unregister_device(pad_input_dev);
pad_input_dev = NULL;
+ wacom_wac->pad_registered = false;
fail_register_pad_input:
input_unregister_device(input_dev);
wacom_wac->input = NULL;
+ wacom_wac->input_registered = false;
return error;
}
features->unitExpo);
}
-static int wacom_hid_report_len(struct hid_report *report)
-{
- /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */
- return ((report->size - 1) >> 3) + 1 + (report->id > 0);
-}
-
static size_t wacom_compute_pktlen(struct hid_device *hdev)
{
struct hid_report_enum *report_enum;
report_enum = hdev->report_enum + HID_INPUT_REPORT;
list_for_each_entry(report, &report_enum->report_list, list) {
- size_t report_size = wacom_hid_report_len(report);
+ size_t report_size = hid_report_len(report);
if (report_size > size)
size = report_size;
}
#define WACOM_INTUOS_RES 100
#define WACOM_INTUOS3_RES 200
+/* Newer Cintiq and DTU have an offset between tablet and screen areas */
+#define WACOM_DTU_OFFSET 200
+#define WACOM_CINTIQ_OFFSET 400
+
/*
* Scale factor relating reported contact size to logical contact area.
* 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
}
input_report_abs(input, ABS_PRESSURE, t);
input_report_abs(input, ABS_TILT_X,
- ((data[7] << 1) & 0x7e) | (data[8] >> 7));
- input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
+ (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
+ input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
input_report_key(input, BTN_STYLUS, data[1] & 2);
input_report_key(input, BTN_STYLUS2, data[1] & 4);
input_report_key(input, BTN_TOUCH, t > 10);
input_report_abs(input, ABS_WHEEL,
(data[6] << 2) | ((data[7] >> 6) & 3));
input_report_abs(input, ABS_TILT_X,
- ((data[7] << 1) & 0x7e) | (data[8] >> 7));
- input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
+ (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
+ input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
}
}
input_report_key(input, BTN_EXTRA, data[6] & 0x10);
input_report_abs(input, ABS_TILT_X,
- ((data[7] << 1) & 0x7e) | (data[8] >> 7));
- input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
+ (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
+ input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
} else {
/* 2D mouse packet */
input_report_key(input, BTN_LEFT, data[8] & 0x04);
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
- struct input_dev *input = wacom_wac->input;
+ struct wacom_features *features = &wacom_wac->features;
unsigned touch_max = wacom_wac->features.touch_max;
switch (usage->hid) {
case HID_GD_X:
+ features->last_slot_field = usage->hid;
if (touch_max == 1)
wacom_map_usage(wacom, usage, field, EV_ABS, ABS_X, 4);
else
ABS_MT_POSITION_X, 4);
break;
case HID_GD_Y:
+ features->last_slot_field = usage->hid;
if (touch_max == 1)
wacom_map_usage(wacom, usage, field, EV_ABS, ABS_Y, 4);
else
ABS_MT_POSITION_Y, 4);
break;
case HID_DG_CONTACTID:
- input_mt_init_slots(input, wacom_wac->features.touch_max,
- INPUT_MT_DIRECT);
+ features->last_slot_field = usage->hid;
break;
case HID_DG_INRANGE:
+ features->last_slot_field = usage->hid;
break;
case HID_DG_INVERT:
+ features->last_slot_field = usage->hid;
break;
case HID_DG_TIPSWITCH:
+ features->last_slot_field = usage->hid;
wacom_map_usage(wacom, usage, field, EV_KEY, BTN_TOUCH, 0);
break;
}
}
+static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
+ struct input_dev *input)
+{
+ struct hid_data *hid_data = &wacom_wac->hid_data;
+ bool mt = wacom_wac->features.touch_max > 1;
+ bool prox = hid_data->tipswitch &&
+ !wacom_wac->shared->stylus_in_proximity;
+
+ if (mt) {
+ int slot;
+
+ slot = input_mt_get_slot_by_key(input, hid_data->id);
+ input_mt_slot(input, slot);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, prox);
+ }
+ else {
+ input_report_key(input, BTN_TOUCH, prox);
+ }
+
+ if (prox) {
+ input_report_abs(input, mt ? ABS_MT_POSITION_X : ABS_X,
+ hid_data->x);
+ input_report_abs(input, mt ? ABS_MT_POSITION_Y : ABS_Y,
+ hid_data->y);
+ }
+}
+
static int wacom_wac_finger_event(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage, __s32 value)
{
}
+ if (usage->usage_index + 1 == field->report_count) {
+ if (usage->hid == wacom_wac->features.last_slot_field)
+ wacom_wac_finger_slot(wacom_wac, wacom_wac->input);
+ }
+
return 0;
}
-static void wacom_wac_finger_mt_report(struct wacom_wac *wacom_wac,
- struct input_dev *input, bool touch)
+static int wacom_wac_finger_count_touches(struct hid_device *hdev)
{
- int slot;
- struct hid_data *hid_data = &wacom_wac->hid_data;
+ struct wacom *wacom = hid_get_drvdata(hdev);
+ struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+ struct input_dev *input = wacom_wac->input;
+ unsigned touch_max = wacom_wac->features.touch_max;
+ int count = 0;
+ int i;
- slot = input_mt_get_slot_by_key(input, hid_data->id);
+ if (touch_max == 1)
+ return wacom_wac->hid_data.tipswitch &&
+ !wacom_wac->shared->stylus_in_proximity;
- input_mt_slot(input, slot);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
- if (touch) {
- input_report_abs(input, ABS_MT_POSITION_X, hid_data->x);
- input_report_abs(input, ABS_MT_POSITION_Y, hid_data->y);
+ for (i = 0; i < input->mt->num_slots; i++) {
+ struct input_mt_slot *ps = &input->mt->slots[i];
+ int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
+ if (id >= 0)
+ count++;
}
- input_mt_sync_frame(input);
-}
-static void wacom_wac_finger_single_touch_report(struct wacom_wac *wacom_wac,
- struct input_dev *input, bool touch)
-{
- struct hid_data *hid_data = &wacom_wac->hid_data;
-
- if (touch) {
- input_report_abs(input, ABS_X, hid_data->x);
- input_report_abs(input, ABS_Y, hid_data->y);
- }
- input_report_key(input, BTN_TOUCH, touch);
+ return count;
}
static void wacom_wac_finger_report(struct hid_device *hdev,
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->input;
- bool touch = wacom_wac->hid_data.tipswitch &&
- !wacom_wac->shared->stylus_in_proximity;
unsigned touch_max = wacom_wac->features.touch_max;
if (touch_max > 1)
- wacom_wac_finger_mt_report(wacom_wac, input, touch);
- else
- wacom_wac_finger_single_touch_report(wacom_wac, input, touch);
+ input_mt_sync_frame(input);
+
input_sync(input);
/* keep touch state for pen event */
- wacom_wac->shared->touch_down = touch;
+ wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(hdev);
}
#define WACOM_PEN_FIELD(f) (((f)->logical == HID_DG_STYLUS) || \
- ((f)->physical == HID_DG_STYLUS))
+ ((f)->physical == HID_DG_STYLUS) || \
+ ((f)->application == HID_DG_PEN))
#define WACOM_FINGER_FIELD(f) (((f)->logical == HID_DG_FINGER) || \
- ((f)->physical == HID_DG_FINGER))
+ ((f)->physical == HID_DG_FINGER) || \
+ ((f)->application == HID_DG_TOUCHSCREEN))
void wacom_wac_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
return 0;
if (data[0] == WACOM_REPORT_USB) {
- if (features->type == INTUOSHT && features->touch_max) {
+ if (features->type == INTUOSHT &&
+ wacom->shared->touch_input &&
+ features->touch_max) {
input_report_switch(wacom->shared->touch_input,
SW_MUTE_DEVICE, data[8] & 0x40);
input_sync(wacom->shared->touch_input);
int pid, battery, ps_connected;
if ((wacom->shared->type == INTUOSHT) &&
- wacom->shared->touch_max) {
+ wacom->shared->touch_input &&
+ wacom->shared->touch_max) {
input_report_switch(wacom->shared->touch_input,
SW_MUTE_DEVICE, data[5] & 0x40);
input_sync(wacom->shared->touch_input);
break;
case DTUS:
+ case DTUSX:
sync = wacom_dtus_irq(wacom_wac);
break;
input_set_abs_params(input_dev, ABS_DISTANCE,
0, wacom_wac->features.distance_max, 0, 0);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
- input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
- input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_X, -64, 63, 0, 0);
+ input_abs_set_res(input_dev, ABS_TILT_X, 57);
+ input_set_abs_params(input_dev, ABS_TILT_Y, -64, 63, 0, 0);
+ input_abs_set_res(input_dev, ABS_TILT_Y, 57);
}
static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
__set_bit(BTN_TOOL_LENS, input_dev->keybit);
input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_RZ, 287);
input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
}
}
}
-int wacom_setup_input_capabilities(struct input_dev *input_dev,
+int wacom_setup_pentouch_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
switch (features->type) {
case WACOM_MO:
- input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
- /* fall through */
-
case WACOM_G4:
/* fall through */
case WACOM_24HD:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_Z, 287);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
/* fall through */
case WACOM_BEE:
case CINTIQ:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_Z, 287);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
case WACOM_13HD:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_Z, 287);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
wacom_setup_cintiq(wacom_wac);
break;
case INTUOS3L:
case INTUOS3S:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_Z, 287);
/* fall through */
case INTUOS:
0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_Z, 287);
wacom_setup_intuos(wacom_wac);
} else if (features->device_type == BTN_TOOL_FINGER) {
case INTUOS4L:
case INTUOS4S:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_Z, 287);
wacom_setup_intuos(wacom_wac);
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
/* fall through */
case DTUS:
+ case DTUSX:
case PL:
case DTU:
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__clear_bit(ABS_X, input_dev->absbit);
__clear_bit(ABS_Y, input_dev->absbit);
__clear_bit(BTN_TOUCH, input_dev->keybit);
+
+ /* PAD is setup by wacom_setup_pad_input_capabilities later */
+ return 1;
}
} else if (features->device_type == BTN_TOOL_PEN) {
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
case CINTIQ_HYBRID:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_abs_set_res(input_dev, ABS_Z, 287);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
wacom_setup_cintiq(wacom_wac);
case WACOM_G4:
__set_bit(BTN_BACK, input_dev->keybit);
- __set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
- __set_bit(BTN_RIGHT, input_dev->keybit);
input_set_capability(input_dev, EV_REL, REL_WHEEL);
break;
case INTUOSPS:
/* touch interface does not have the pad device */
if (features->device_type != BTN_TOOL_PEN)
- return 1;
+ return -ENODEV;
for (i = 0; i < 7; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
case INTUOSHT:
case BAMBOO_PT:
/* pad device is on the touch interface */
- if (features->device_type != BTN_TOOL_FINGER)
- return 1;
+ if ((features->device_type != BTN_TOOL_FINGER) ||
+ /* Bamboo Pen only tablet does not have pad */
+ ((features->type == BAMBOO_PT) && !features->touch_max))
+ return -ENODEV;
__clear_bit(ABS_MISC, input_dev->absbit);
default:
/* no pad supported */
- return 1;
+ return -ENODEV;
}
return 0;
}
INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xF4 =
- { "Wacom Cintiq 24HD", 104280, 65400, 2047, 63,
- WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
+ { "Wacom Cintiq 24HD", 104080, 65200, 2047, 63,
+ WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0xF8 =
- { "Wacom Cintiq 24HD touch", 104280, 65400, 2047, 63, /* Pen */
- WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
+ { "Wacom Cintiq 24HD touch", 104080, 65200, 2047, 63, /* Pen */
+ WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
static const struct wacom_features wacom_features_0xF6 =
{ "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
{ "Wacom Cintiq 12WX", 53020, 33440, 1023, 63,
WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0x304 =
- { "Wacom Cintiq 13HD", 59352, 33648, 1023, 63,
- WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
+ { "Wacom Cintiq 13HD", 59152, 33448, 1023, 63,
+ WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0xC7 =
{ "Wacom DTU1931", 37832, 30305, 511, 0,
PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
{ "Wacom DTU1631", 34623, 19553, 511, 0,
DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xFB =
- { "Wacom DTU1031", 22096, 13960, 511, 0,
- DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ { "Wacom DTU1031", 21896, 13760, 511, 0,
+ DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
+static const struct wacom_features wacom_features_0x32F =
+ { "Wacom DTU1031X", 22472, 12728, 511, 0,
+ DTUSX, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x57 =
{ "Wacom DTK2241", 95640, 54060, 2047, 63,
- DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
+ DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x59 = /* Pen */
{ "Wacom DTH2242", 95640, 54060, 2047, 63,
- DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
+ DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
static const struct wacom_features wacom_features_0x5D = /* Touch */
{ "Wacom DTH2242", .type = WACOM_24HDT,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xCC =
- { "Wacom Cintiq 21UX2", 87000, 65400, 2047, 63,
- WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
+ { "Wacom Cintiq 21UX2", 86800, 65200, 2047, 63,
+ WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0xFA =
- { "Wacom Cintiq 22HD", 95640, 54060, 2047, 63,
- WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
+ { "Wacom Cintiq 22HD", 95440, 53860, 2047, 63,
+ WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x5B =
- { "Wacom Cintiq 22HDT", 95640, 54060, 2047, 63,
- WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
+ { "Wacom Cintiq 22HDT", 95440, 53860, 2047, 63,
+ WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
static const struct wacom_features wacom_features_0x5E =
{ "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
{ "ISD-V4", 12800, 8000, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x307 =
- { "Wacom ISDv5 307", 59352, 33648, 2047, 63,
- CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
+ { "Wacom ISDv5 307", 59152, 33448, 2047, 63,
+ CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
static const struct wacom_features wacom_features_0x309 =
{ "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x30A =
- { "Wacom ISDv5 30A", 59352, 33648, 2047, 63,
- CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
+ { "Wacom ISDv5 30A", 59152, 33448, 2047, 63,
+ CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30C };
static const struct wacom_features wacom_features_0x30C =
{ "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
+static const struct wacom_features wacom_features_0x323 =
+ { "Wacom Intuos P M", 21600, 13500, 1023, 31,
+ INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_HID_ANY_ID =
{ "Wacom HID", .type = HID_GENERIC };
{ USB_DEVICE_WACOM(0x314) },
{ USB_DEVICE_WACOM(0x315) },
{ USB_DEVICE_WACOM(0x317) },
+ { USB_DEVICE_WACOM(0x323) },
+ { USB_DEVICE_WACOM(0x32F) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x4004) },
{ USB_DEVICE_WACOM(0x5000) },
{ USB_DEVICE_WACOM(0x5002) },
+ { USB_DEVICE_LENOVO(0x6004) },
{ USB_DEVICE_WACOM(HID_ANY_ID) },
{ }
PL,
DTU,
DTUS,
+ DTUSX,
INTUOS,
INTUOS3S,
INTUOS3,
int pktlen;
bool check_for_hid_type;
int hid_type;
+ int last_slot_field;
};
struct wacom_shared {
struct input_dev *input;
struct input_dev *pad_input;
bool input_registered;
+ bool pad_registered;
int pid;
int battery_capacity;
int num_contacts_left;
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
{}
};
MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
opal = of_find_node_by_path("/ibm,opal/sensors");
if (!opal) {
- dev_err(&pdev->dev, "Opal node 'sensors' not found\n");
+ dev_dbg(&pdev->dev, "Opal node 'sensors' not found\n");
return -ENODEV;
}
err = platform_driver_probe(&ibmpowernv_driver, ibmpowernv_probe);
if (err) {
- pr_err("Platfrom driver probe failed\n");
+ if (err != -ENODEV)
+ pr_err("Platform driver probe failed (%d)\n", err);
+
goto exit_device_del;
}
static int pwm_fan_resume(struct device *dev)
{
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
+ unsigned long duty;
+ int ret;
- if (ctx->pwm_value)
- return pwm_enable(ctx->pwm);
- return 0;
+ if (ctx->pwm_value == 0)
+ return 0;
+
+ duty = DIV_ROUND_UP(ctx->pwm_value * (ctx->pwm->period - 1), MAX_PWM);
+ ret = pwm_config(ctx->pwm, duty, ctx->pwm->period);
+ if (ret)
+ return ret;
+ return pwm_enable(ctx->pwm);
}
#endif
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
* ------------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
- *
* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
* Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
* <mbailey@littlefeet-inc.com>
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* -------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl> */
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
}
}
- ret = wait_for_completion_io_timeout(&dev->cmd_complete,
+ ret = wait_for_completion_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/delay.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
- *
* Author:
* Darius Augulis, Teltonika Inc.
*
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#define PORT_DATA 0
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
*/
#include <linux/module.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Note: we assume there can only be one SIS5595 with one SMBus interface */
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
*
* This code was implemented by Mocean Laboratories AB when porting linux
* to the automotive development board Russellville. The copyright holder
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
status = driver->remove(client);
}
+ if (dev->of_node)
+ irq_dispose_mapping(client->irq);
+
dev_pm_domain_detach(&client->dev, true);
return status;
}
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/rwsem.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
*/
/* Note that this is a complete rewrite of Simon Vogl's i2c-dev module.
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define DEBUG 1
static const struct iio_event_spec kxcjk1013_event = {
.type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
+ .dir = IIO_EV_DIR_EITHER,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE) |
BIT(IIO_EV_INFO_PERIOD)
goto st_sensors_free_memory;
}
- for (i = 0; i < n * num_data_channels; i++) {
+ for (i = 0; i < n * byte_for_channel; i++) {
if (i < n)
buf[i] = rx_array[i];
else
return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
TSL4531_MODE_NORMAL);
}
-#endif
static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume);
+#define TSL4531_PM_OPS (&tsl4531_pm_ops)
+#else
+#define TSL4531_PM_OPS NULL
+#endif
static const struct i2c_device_id tsl4531_id[] = {
{ "tsl4531", 0 },
static struct i2c_driver tsl4531_driver = {
.driver = {
.name = TSL4531_DRV_NAME,
- .pm = &tsl4531_pm_ops,
+ .pm = TSL4531_PM_OPS,
.owner = THIS_MODULE,
},
.probe = tsl4531_probe,
return -EINVAL;
}
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(st));
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
err = __mlx4_ib_create_flow(qp, flow_attr, domain, type[i],
&mflow->reg_id[i]);
if (err)
- goto err_free;
+ goto err_create_flow;
i++;
}
if (i < ARRAY_SIZE(type) && flow_attr->type == IB_FLOW_ATTR_NORMAL) {
err = mlx4_ib_tunnel_steer_add(qp, flow_attr, &mflow->reg_id[i]);
if (err)
- goto err_free;
+ goto err_create_flow;
+ i++;
}
return &mflow->ibflow;
+err_create_flow:
+ while (i) {
+ (void)__mlx4_ib_destroy_flow(to_mdev(qp->device)->dev, mflow->reg_id[i]);
+ i--;
+ }
err_free:
kfree(mflow);
return ERR_PTR(err);
opencores_kbd->addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(opencores_kbd->addr))
- error = PTR_ERR(opencores_kbd->addr);
+ return PTR_ERR(opencores_kbd->addr);
input->name = pdev->name;
input->phys = "opencores-kbd/input0";
.max_cols = 8,
.max_rows = 12,
.col_gpios = 0x0000ff, /* GPIO 0 - 7*/
- .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
+ .row_gpios = 0x1f7f00, /* GPIO 8-14, 16-20 */
},
[STMPE2403] = {
.auto_increment = true,
pcu->ofn_reg_addr = value;
mutex_unlock(&pcu->cmd_mutex);
- return error ?: count;
+ return count;
}
static DEVICE_ATTR(reg_addr, S_IRUGO | S_IWUSR,
struct ff_effect *effect)
{
struct max77693_haptic *haptic = input_get_drvdata(dev);
- uint64_t period_mag_multi;
+ u64 period_mag_multi;
haptic->magnitude = effect->u.rumble.strong_magnitude;
if (!haptic->magnitude)
* The formula to convert magnitude to pwm_duty as follows:
* - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF)
*/
- period_mag_multi = (int64_t)(haptic->pwm_dev->period *
- haptic->magnitude);
+ period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
haptic->pwm_duty = (unsigned int)(period_mag_multi >>
MAX_MAGNITUDE_SHIFT);
struct gpio_desc *desc;
int gpio;
- desc = gpiod_get_index(dev, KBUILD_MODNAME, acpi_index);
+ desc = gpiod_get_index(dev, KBUILD_MODNAME, acpi_index, GPIOD_ASIS);
if (IS_ERR(desc))
return PTR_ERR(desc);
{
struct psmouse *psmouse = serio_get_drvdata(serio);
struct psmouse *parent = NULL;
- struct serio_driver *drv = serio->drv;
unsigned char type;
int rc = -1;
- if (!drv || !psmouse) {
- psmouse_dbg(psmouse,
- "reconnect request, but serio is disconnected, ignoring...\n");
- return -1;
- }
-
mutex_lock(&psmouse_mutex);
if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
if (num >= mouse->count) {
mouse->count = 0;
} else {
- memmove(mouse->buf, mouse->buf + num - 1, BUFLEN - num);
+ memmove(mouse->buf, mouse->buf + num, BUFLEN - num);
mouse->count -= num;
}
}
{
struct ps2if *ps2if = dev_id;
unsigned int status;
- int handled = IRQ_NONE;
+ irqreturn_t handled = IRQ_NONE;
while ((status = readl(ps2if->base)) & 0xffff0000) {
serio_interrupt(ps2if->io, status & 0xff, 0);
{
struct ps2if *ps2if = io->port_data;
- writel(0, ps2if->base); /* disable rx irq */
+ writel(0, ps2if->base + 4); /* disable rx irq */
}
/*
};
/*
- * Some laptops do implement active multiplexing mode correctly;
- * unfortunately they are in minority.
+ * Some Fujitsu notebooks are having trouble with touchpads if
+ * active multiplexing mode is activated. Luckily they don't have
+ * external PS/2 ports so we can safely disable it.
+ * ... apparently some Toshibas don't like MUX mode either and
+ * die horrible death on reboot.
*/
-static const struct dmi_system_id __initconst i8042_dmi_mux_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
+ {
+ /* Fujitsu Lifebook P7010/P7010D */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P7010"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook P7010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook P5020D */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook S2000 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook S6230 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
+ },
+ },
+ {
+ /* Fujitsu T70H */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Lifebook T3010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Lifebook E4010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Amilo Pro 2010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Amilo Pro 2030 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
+ {
+ /*
+ * No data is coming from the touchscreen unless KBC
+ * is in legacy mode.
+ */
+ /* Panasonic CF-29 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
+ },
+ },
+ {
+ /*
+ * HP Pavilion DV4017EA -
+ * errors on MUX ports are reported without raising AUXDATA
+ * causing "spurious NAK" messages.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"),
+ },
+ },
+ {
+ /*
+ * HP Pavilion ZT1000 -
+ * like DV4017EA does not raise AUXERR for errors on MUX ports.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook ZT1000"),
+ },
+ },
+ {
+ /*
+ * HP Pavilion DV4270ca -
+ * like DV4017EA does not raise AUXERR for errors on MUX ports.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
+ },
+ },
+ {
+ /* Sharp Actius MM20 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"),
+ },
+ },
+ {
+ /* Sony Vaio FS-115b */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
+ },
+ },
+ {
+ /*
+ * Sony Vaio FZ-240E -
+ * reset and GET ID commands issued via KBD port are
+ * sometimes being delivered to AUX3.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
+ },
+ },
{
/*
- * Panasonic CF-18 needs to be in MUX mode since the
- * touchscreen is on serio3 and it also has touchpad.
+ * Most (all?) VAIOs do not have external PS/2 ports nor
+ * they implement active multiplexing properly, and
+ * MUX discovery usually messes up keyboard/touchpad.
*/
.matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "VAIO"),
+ },
+ },
+ {
+ /* Amoi M636/A737 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
+ },
+ },
+ {
+ /* Lenovo 3000 n100 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
+ },
+ },
+ {
+ /* Acer Aspire 5710 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710"),
+ },
+ },
+ {
+ /* Gericom Bellagio */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"),
+ },
+ },
+ {
+ /* IBM 2656 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
+ },
+ },
+ {
+ /* Dell XPS M1530 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ /* Compal HEL80I */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
+ {
+ /* Dell Vostro 1510 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
+ },
+ },
+ {
+ /* Acer Aspire 5536 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+ },
+ },
+ {
+ /* Dell Vostro V13 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
+ },
+ },
+ {
+ /* Newer HP Pavilion dv4 models */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
+ },
+ },
+ {
+ /* Asus X450LCP */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
+ },
+ },
+ {
+ /* Avatar AVIU-145A6 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
},
},
{ }
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Fujitsu A544 laptop */
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1111138 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK A544"),
+ },
+ },
+ {
+ /* Fujitsu AH544 laptop */
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK AH544"),
+ },
+ },
{
/* Fujitsu U574 laptop */
/* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = true;
- if (dmi_check_system(i8042_dmi_mux_table))
- i8042_nomux = false;
+ if (dmi_check_system(i8042_dmi_nomux_table))
+ i8042_nomux = true;
if (dmi_check_system(i8042_dmi_notimeout_table))
i8042_notimeout = true;
module_param_named(noaux, i8042_noaux, bool, 0);
MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
-static bool i8042_nomux = true;
+static bool i8042_nomux;
module_param_named(nomux, i8042_nomux, bool, 0);
MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present.");
* Documentation/input/input-programming.txt for more details.
*/
-static int abs_x[3] = {350, 3900, 5};
+static int abs_x[3] = {150, 4000, 5};
module_param_array(abs_x, int, NULL, 0);
MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
-static int abs_y[3] = {320, 3750, 40};
+static int abs_y[3] = {200, 4000, 40};
module_param_array(abs_y, int, NULL, 0);
MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4)
#define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF
+#define ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << cpuid)
#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
#define ARMADA_375_PPI_CAUSE (0x10)
struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
- unsigned long irqmap, irqn;
+ unsigned long irqmap, irqn, irqsrc, cpuid;
unsigned int cascade_irq;
chained_irq_enter(chip, desc);
irqmap = readl_relaxed(per_cpu_int_base + ARMADA_375_PPI_CAUSE);
-
- if (irqmap & BIT(0)) {
- armada_370_xp_handle_msi_irq(NULL, true);
- irqmap &= ~BIT(0);
- }
+ cpuid = cpu_logical_map(smp_processor_id());
for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
+ irqsrc = readl_relaxed(main_int_base +
+ ARMADA_370_XP_INT_SOURCE_CTL(irqn));
+
+ /* Check if the interrupt is not masked on current CPU.
+ * Test IRQ (0-1) and FIQ (8-9) mask bits.
+ */
+ if (!(irqsrc & ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid)))
+ continue;
+
+ if (irqn == 1) {
+ armada_370_xp_handle_msi_irq(NULL, true);
+ continue;
+ }
+
cascade_irq = irq_find_mapping(armada_370_xp_mpic_domain, irqn);
generic_handle_irq(cascade_irq);
}
/*
* Test if the buffer is unused and too old, and commit it.
- * At if noio is set, we must not do any I/O because we hold
- * dm_bufio_clients_lock and we would risk deadlock if the I/O gets rerouted to
- * different bufio client.
+ * And if GFP_NOFS is used, we must not do any I/O because we hold
+ * dm_bufio_clients_lock and we would risk deadlock if the I/O gets
+ * rerouted to different bufio client.
*/
static int __cleanup_old_buffer(struct dm_buffer *b, gfp_t gfp,
unsigned long max_jiffies)
if (jiffies - b->last_accessed < max_jiffies)
return 0;
- if (!(gfp & __GFP_IO)) {
+ if (!(gfp & __GFP_FS)) {
if (test_bit(B_READING, &b->state) ||
test_bit(B_WRITING, &b->state) ||
test_bit(B_DIRTY, &b->state))
unsigned long freed;
c = container_of(shrink, struct dm_bufio_client, shrinker);
- if (sc->gfp_mask & __GFP_IO)
+ if (sc->gfp_mask & __GFP_FS)
dm_bufio_lock(c);
else if (!dm_bufio_trylock(c))
return SHRINK_STOP;
unsigned long count;
c = container_of(shrink, struct dm_bufio_client, shrinker);
- if (sc->gfp_mask & __GFP_IO)
+ if (sc->gfp_mask & __GFP_FS)
dm_bufio_lock(c);
else if (!dm_bufio_trylock(c))
return 0;
__le32 layout;
__le32 stripe_sectors;
- __u8 pad[452]; /* Round struct to 512 bytes. */
- /* Always set to 0 when writing. */
+ /* Remainder of a logical block is zero-filled when writing (see super_sync()). */
} __packed;
static int read_disk_sb(struct md_rdev *rdev, int size)
test_bit(Faulty, &(rs->dev[i].rdev.flags)))
failed_devices |= (1ULL << i);
- memset(sb, 0, sizeof(*sb));
+ memset(sb + 1, 0, rdev->sb_size - sizeof(*sb));
sb->magic = cpu_to_le32(DM_RAID_MAGIC);
sb->features = cpu_to_le32(0); /* No features yet */
uint64_t events_sb, events_refsb;
rdev->sb_start = 0;
- rdev->sb_size = sizeof(*sb);
+ rdev->sb_size = bdev_logical_block_size(rdev->meta_bdev);
+ if (rdev->sb_size < sizeof(*sb) || rdev->sb_size > PAGE_SIZE) {
+ DMERR("superblock size of a logical block is no longer valid");
+ return -EINVAL;
+ }
ret = read_disk_sb(rdev, rdev->sb_size);
if (ret)
raid456 = (rs->md.level == 4 || rs->md.level == 5 || rs->md.level == 6);
for (i = 0; i < rs->md.raid_disks; i++) {
- struct request_queue *q = bdev_get_queue(rs->dev[i].rdev.bdev);
+ struct request_queue *q;
+
+ if (!rs->dev[i].rdev.bdev)
+ continue;
+ q = bdev_get_queue(rs->dev[i].rdev.bdev);
if (!q || !blk_queue_discard(q))
return;
sc->stripes_shift = __ffs(stripes);
r = dm_set_target_max_io_len(ti, chunk_size);
- if (r)
+ if (r) {
+ kfree(sc);
return r;
+ }
ti->num_flush_bios = stripes;
ti->num_discard_bios = stripes;
return DM_MAPIO_SUBMITTED;
}
+ /*
+ * We must hold the virtual cell before doing the lookup, otherwise
+ * there's a race with discard.
+ */
+ build_virtual_key(tc->td, block, &key);
+ if (dm_bio_detain(tc->pool->prison, &key, bio, &cell1, &cell_result))
+ return DM_MAPIO_SUBMITTED;
+
r = dm_thin_find_block(td, block, 0, &result);
/*
* shared flag will be set in their case.
*/
thin_defer_bio(tc, bio);
+ cell_defer_no_holder_no_free(tc, &cell1);
return DM_MAPIO_SUBMITTED;
}
- build_virtual_key(tc->td, block, &key);
- if (dm_bio_detain(tc->pool->prison, &key, bio, &cell1, &cell_result))
- return DM_MAPIO_SUBMITTED;
-
build_data_key(tc->td, result.block, &key);
if (dm_bio_detain(tc->pool->prison, &key, bio, &cell2, &cell_result)) {
cell_defer_no_holder_no_free(tc, &cell1);
* of doing so.
*/
handle_unserviceable_bio(tc->pool, bio);
+ cell_defer_no_holder_no_free(tc, &cell1);
return DM_MAPIO_SUBMITTED;
}
/* fall through */
* provide the hint to load the metadata into cache.
*/
thin_defer_bio(tc, bio);
+ cell_defer_no_holder_no_free(tc, &cell1);
return DM_MAPIO_SUBMITTED;
default:
* pool is switched to fail-io mode.
*/
bio_io_error(bio);
+ cell_defer_no_holder_no_free(tc, &cell1);
return DM_MAPIO_SUBMITTED;
}
}
} __packed;
+/*
+ * Locks a block using the btree node validator.
+ */
+int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
+ struct dm_block **result);
+
void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
struct dm_btree_value_type *vt);
/*----------------------------------------------------------------*/
-static int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
+int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
struct dm_block **result)
{
return dm_tm_read_lock(info->tm, b, &btree_node_validator, result);
* FIXME: We shouldn't use a recursive algorithm when we have limited stack
* space. Also this only works for single level trees.
*/
-static int walk_node(struct ro_spine *s, dm_block_t block,
+static int walk_node(struct dm_btree_info *info, dm_block_t block,
int (*fn)(void *context, uint64_t *keys, void *leaf),
void *context)
{
int r;
unsigned i, nr;
+ struct dm_block *node;
struct btree_node *n;
uint64_t keys;
- r = ro_step(s, block);
- n = ro_node(s);
+ r = bn_read_lock(info, block, &node);
+ if (r)
+ return r;
+
+ n = dm_block_data(node);
nr = le32_to_cpu(n->header.nr_entries);
for (i = 0; i < nr; i++) {
if (le32_to_cpu(n->header.flags) & INTERNAL_NODE) {
- r = walk_node(s, value64(n, i), fn, context);
+ r = walk_node(info, value64(n, i), fn, context);
if (r)
goto out;
} else {
}
out:
- ro_pop(s);
+ dm_tm_unlock(info->tm, node);
return r;
}
int (*fn)(void *context, uint64_t *keys, void *leaf),
void *context)
{
- int r;
- struct ro_spine spine;
-
BUG_ON(info->levels > 1);
-
- init_ro_spine(&spine, info);
- r = walk_node(&spine, root, fn, context);
- exit_ro_spine(&spine);
-
- return r;
+ return walk_node(info, root, fn, context);
}
EXPORT_SYMBOL_GPL(dm_btree_walk);
case SYS_ATSC:
c->modulation = VSB_8;
break;
+ case SYS_ISDBS:
+ c->symbol_rate = 28860000;
+ c->rolloff = ROLLOFF_35;
+ c->bandwidth_hz = c->symbol_rate / 100 * 135;
+ break;
default:
c->modulation = QAM_AUTO;
break;
break;
case SYS_DVBS:
case SYS_TURBO:
+ case SYS_ISDBS:
rolloff = 135;
break;
case SYS_DVBS2:
memcpy(&state->frontend.ops, &ds3000_ops,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
+
+ /*
+ * Some devices like T480 starts with voltage on. Be sure
+ * to turn voltage off during init, as this can otherwise
+ * interfere with Unicable SCR systems.
+ */
+ ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF);
return &state->frontend;
error3:
return s->status;
}
-int sp2_init(struct sp2 *s)
+static int sp2_init(struct sp2 *s)
{
int ret = 0;
u8 buf;
return ret;
}
-int sp2_exit(struct i2c_client *client)
+static int sp2_exit(struct i2c_client *client)
{
struct sp2 *s;
c->delivery_system = SYS_ISDBS;
layers = 0;
- ret = reg_read(state, 0xe8, val, 3);
+ ret = reg_read(state, 0xe6, val, 5);
if (ret == 0) {
- int slots;
u8 v;
+ c->stream_id = val[0] << 8 | val[1];
+
/* high/single layer */
- v = (val[0] & 0x70) >> 4;
+ v = (val[2] & 0x70) >> 4;
c->modulation = (v == 7) ? PSK_8 : QPSK;
c->fec_inner = fec_conv_sat[v];
c->layer[0].fec = c->fec_inner;
c->layer[0].modulation = c->modulation;
- c->layer[0].segment_count = val[1] & 0x3f; /* slots */
+ c->layer[0].segment_count = val[3] & 0x3f; /* slots */
/* low layer */
- v = (val[0] & 0x07);
+ v = (val[2] & 0x07);
c->layer[1].fec = fec_conv_sat[v];
if (v == 0) /* no low layer */
c->layer[1].segment_count = 0;
else
- c->layer[1].segment_count = val[2] & 0x3f; /* slots */
+ c->layer[1].segment_count = val[4] & 0x3f; /* slots */
/* actually, BPSK if v==1, but not defined in fe_modulation_t */
c->layer[1].modulation = QPSK;
layers = (v > 0) ? 2 : 1;
-
- slots = c->layer[0].segment_count + c->layer[1].segment_count;
- c->symbol_rate = 28860000 * slots / 48;
}
/* statistics */
u8 v;
c->isdbt_partial_reception = val[0] & 0x01;
- c->isdbt_sb_mode = (val[0] & 0xc0) == 0x01;
+ c->isdbt_sb_mode = (val[0] & 0xc0) == 0x40;
/* layer A */
v = (val[2] & 0x78) >> 3;
"\t\t bit 0=crop, 1=compose, 2=scale,\n"
"\t\t -1=user-controlled (default)");
-static unsigned multiplanar[VIVID_MAX_DEVS];
+static unsigned multiplanar[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 1 };
module_param_array(multiplanar, uint, NULL, 0444);
-MODULE_PARM_DESC(multiplanar, " 0 (default) is alternating single and multiplanar devices,\n"
- "\t\t 1 is single planar devices,\n"
- "\t\t 2 is multiplanar devices");
+MODULE_PARM_DESC(multiplanar, " 1 (default) creates a single planar device, 2 creates a multiplanar device.");
/* Default: video + vbi-cap (raw and sliced) + radio rx + radio tx + sdr + vbi-out + vid-out */
static unsigned node_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0x1d3d };
/* start detecting feature set */
/* do we use single- or multi-planar? */
- if (multiplanar[inst] == 0)
- dev->multiplanar = inst & 1;
- else
- dev->multiplanar = multiplanar[inst] > 1;
+ dev->multiplanar = multiplanar[inst] > 1;
v4l2_info(&dev->v4l2_dev, "using %splanar format API\n",
dev->multiplanar ? "multi" : "single ");
if (press_type == 0)
rc_keyup(ictx->rdev);
else {
- if (ictx->rc_type == RC_BIT_RC6_MCE)
+ if (ictx->rc_type == RC_BIT_RC6_MCE ||
+ ictx->rc_type == RC_BIT_OTHER)
rc_keydown(ictx->rdev,
ictx->rc_type == RC_BIT_RC6_MCE ? RC_TYPE_RC6_MCE : RC_TYPE_OTHER,
ictx->rc_scancode, ictx->rc_toggle);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int hix5hd2_ir_suspend(struct device *dev)
{
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
u32 scancode;
enum rc_type protocol;
- if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
+ if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ)))
return 0;
if (!is_timing_event(ev)) {
return -ENOMEM;
dev->raw->dev = dev;
- dev->enabled_protocols = ~0;
dev->change_protocol = change_protocol;
rc = kfifo_alloc(&dev->raw->kfifo,
sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
if (dev->change_protocol) {
u64 rc_type = (1 << rc_map->rc_type);
+ if (dev->driver_type == RC_DRIVER_IR_RAW)
+ rc_type |= RC_BIT_LIRC;
rc = dev->change_protocol(dev, &rc_type);
if (rc < 0)
goto out_raw;
goto err_irq_charger;
}
- ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+ ret = regmap_add_irq_chip(max77693->regmap_muic, max77693->irq,
IRQF_ONESHOT | IRQF_SHARED |
IRQF_TRIGGER_FALLING, 0,
&max77693_muic_irq_chip,
goto err_irq_muic;
}
+ /* Unmask interrupts from all blocks in interrupt source register */
+ ret = regmap_update_bits(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK,
+ SRC_IRQ_ALL, (unsigned int)~SRC_IRQ_ALL);
+ if (ret < 0) {
+ dev_err(max77693->dev,
+ "Could not unmask interrupts in INTSRC: %d\n",
+ ret);
+ goto err_intsrc;
+ }
+
pm_runtime_set_active(max77693->dev);
ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
err_mfd:
mfd_remove_devices(max77693->dev);
+err_intsrc:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
err_irq_muic:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
mutex_unlock(&pcr->pcr_mutex);
}
+#ifdef CONFIG_PM
static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
{
if (pcr->ops->turn_off_led)
if (pcr->ops->force_power_down)
pcr->ops->force_power_down(pcr, pm_state);
}
+#endif
static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
{
#define STMPE24XX_REG_CHIP_ID 0x80
#define STMPE24XX_REG_IEGPIOR_LSB 0x18
#define STMPE24XX_REG_ISGPIOR_MSB 0x19
-#define STMPE24XX_REG_GPMR_LSB 0xA5
+#define STMPE24XX_REG_GPMR_LSB 0xA4
#define STMPE24XX_REG_GPSR_LSB 0x85
#define STMPE24XX_REG_GPCR_LSB 0x88
#define STMPE24XX_REG_GPDR_LSB 0x8B
#define PWR_DEVSLP BIT(1)
#define PWR_DEVOFF BIT(0)
+/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */
+#define STARTON_SWBUG BIT(7) /* Start on watchdog */
+#define STARTON_VBUS BIT(5) /* Start on VBUS */
+#define STARTON_VBAT BIT(4) /* Start on battery insert */
+#define STARTON_RTC BIT(3) /* Start on RTC */
+#define STARTON_USB BIT(2) /* Start on USB host */
+#define STARTON_CHG BIT(1) /* Start on charger */
+#define STARTON_PWON BIT(0) /* Start on PWRON button */
+
#define SEQ_OFFSYNC (1 << 0)
#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
return 0;
}
+static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues)
+{
+ u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION,
+ TWL4030_PM_MASTER_CFG_P2_TRANSITION,
+ TWL4030_PM_MASTER_CFG_P3_TRANSITION, };
+ u8 val;
+ int i, err;
+
+ err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+ if (err)
+ goto relock;
+ err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
+ TWL4030_PM_MASTER_KEY_CFG2,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+ if (err)
+ goto relock;
+
+ for (i = 0; i < sizeof(regs); i++) {
+ err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER,
+ &val, regs[i]);
+ if (err)
+ break;
+ val = (~bitmask & val) | (bitmask & bitvalues);
+ err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
+ val, regs[i]);
+ if (err)
+ break;
+ }
+
+ if (err)
+ pr_err("TWL4030 Register access failed: %i\n", err);
+
+relock:
+ return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+}
+
/*
* In master mode, start the power off sequence.
* After a successful execution, TWL shuts down the power to the SoC
{
int err;
+ /* Disable start on charger or VBUS as it can break poweroff */
+ err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0);
+ if (err)
+ pr_err("TWL4030 Unable to configure start-up\n");
+
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF,
TWL4030_PM_MASTER_P1_SW_EVENTS);
if (err)
version >> 8, version & 0xff,
vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
- ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs,
- ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL);
+ ret = mfd_add_devices(&interface->dev, PLATFORM_DEVID_AUTO,
+ vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0,
+ NULL);
if (ret != 0) {
dev_err(&interface->dev, "Failed to add mfd devices to core.");
goto error;
struct device_node *np;
u32 bus_width;
int len, ret;
- bool cap_invert, gpio_invert;
+ bool cd_cap_invert, cd_gpio_invert = false;
+ bool ro_cap_invert, ro_gpio_invert = false;
if (!host->parent || !host->parent->of_node)
return 0;
if (of_find_property(np, "non-removable", &len)) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
- if (of_property_read_bool(np, "cd-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ cd_cap_invert = of_property_read_bool(np, "cd-inverted");
if (of_find_property(np, "broken-cd", &len))
host->caps |= MMC_CAP_NEEDS_POLL;
ret = mmc_gpiod_request_cd(host, "cd", 0, true,
- 0, &gpio_invert);
+ 0, &cd_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
return ret;
* both inverted, the end result is that the CD line is
* not inverted.
*/
- if (cap_invert ^ gpio_invert)
+ if (cd_cap_invert ^ cd_gpio_invert)
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
}
/* Parse Write Protection */
- if (of_property_read_bool(np, "wp-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ ro_cap_invert = of_property_read_bool(np, "wp-inverted");
- ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);
+ ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
goto out;
dev_info(host->parent, "Got WP GPIO\n");
/* See the comment on CD inversion above */
- if (cap_invert ^ gpio_invert)
+ if (ro_cap_invert ^ ro_gpio_invert)
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
if (of_find_property(np, "cap-sd-highspeed", &len))
/* Go to known state. Chip may have been power cycled */
if (chip->state == FL_PM_SUSPENDED) {
+ /* Refresh LH28F640BF Partition Config. Register */
+ fixup_LH28F640BF(mtd);
map_write(map, CMD(0xFF), cfi->chips[i].start);
chip->oldstate = chip->state = FL_READY;
wake_up(&chip->wq);
{
struct mtd_part_parser_data ppdata;
struct flash_platform_data *data;
- const struct spi_device_id *id = NULL;
struct m25p *flash;
struct spi_nor *nor;
enum read_mode mode = SPI_NOR_NORMAL;
+ char *flash_name = NULL;
int ret;
data = dev_get_platdata(&spi->dev);
* If that's the case, respect "type" and ignore a "name".
*/
if (data && data->type)
- id = spi_nor_match_id(data->type);
+ flash_name = data->type;
+ else
+ flash_name = spi->modalias;
- /* If we didn't get name from platform, simply use "modalias". */
- if (!id)
- id = spi_get_device_id(spi);
-
- ret = spi_nor_scan(nor, id, mode);
+ ret = spi_nor_scan(nor, flash_name, mode);
if (ret)
return ret;
}
+/*
+ * XXX This needs to be kept in sync with spi_nor_ids. We can't share
+ * it with spi-nor, because if this is built as a module then modpost
+ * won't be able to read it and add appropriate aliases.
+ */
+static const struct spi_device_id m25p_ids[] = {
+ {"at25fs010"}, {"at25fs040"}, {"at25df041a"}, {"at25df321a"},
+ {"at25df641"}, {"at26f004"}, {"at26df081a"}, {"at26df161a"},
+ {"at26df321"}, {"at45db081d"},
+ {"en25f32"}, {"en25p32"}, {"en25q32b"}, {"en25p64"},
+ {"en25q64"}, {"en25qh128"}, {"en25qh256"},
+ {"f25l32pa"},
+ {"mr25h256"}, {"mr25h10"},
+ {"gd25q32"}, {"gd25q64"},
+ {"160s33b"}, {"320s33b"}, {"640s33b"},
+ {"mx25l2005a"}, {"mx25l4005a"}, {"mx25l8005"}, {"mx25l1606e"},
+ {"mx25l3205d"}, {"mx25l3255e"}, {"mx25l6405d"}, {"mx25l12805d"},
+ {"mx25l12855e"},{"mx25l25635e"},{"mx25l25655e"},{"mx66l51235l"},
+ {"mx66l1g55g"},
+ {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q256a"},
+ {"n25q512a"}, {"n25q512ax3"}, {"n25q00"},
+ {"pm25lv512"}, {"pm25lv010"}, {"pm25lq032"},
+ {"s25sl032p"}, {"s25sl064p"}, {"s25fl256s0"}, {"s25fl256s1"},
+ {"s25fl512s"}, {"s70fl01gs"}, {"s25sl12800"}, {"s25sl12801"},
+ {"s25fl129p0"}, {"s25fl129p1"}, {"s25sl004a"}, {"s25sl008a"},
+ {"s25sl016a"}, {"s25sl032a"}, {"s25sl064a"}, {"s25fl008k"},
+ {"s25fl016k"}, {"s25fl064k"},
+ {"sst25vf040b"},{"sst25vf080b"},{"sst25vf016b"},{"sst25vf032b"},
+ {"sst25vf064c"},{"sst25wf512"}, {"sst25wf010"}, {"sst25wf020"},
+ {"sst25wf040"},
+ {"m25p05"}, {"m25p10"}, {"m25p20"}, {"m25p40"},
+ {"m25p80"}, {"m25p16"}, {"m25p32"}, {"m25p64"},
+ {"m25p128"}, {"n25q032"},
+ {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
+ {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
+ {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
+ {"m45pe10"}, {"m45pe80"}, {"m45pe16"},
+ {"m25pe20"}, {"m25pe80"}, {"m25pe16"},
+ {"m25px16"}, {"m25px32"}, {"m25px32-s0"}, {"m25px32-s1"},
+ {"m25px64"},
+ {"w25x10"}, {"w25x20"}, {"w25x40"}, {"w25x80"},
+ {"w25x16"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
+ {"w25x64"}, {"w25q64"}, {"w25q128"}, {"w25q80"},
+ {"w25q80bl"}, {"w25q128"}, {"w25q256"}, {"cat25c11"},
+ {"cat25c03"}, {"cat25c09"}, {"cat25c17"}, {"cat25128"},
+ { },
+};
+MODULE_DEVICE_TABLE(spi, m25p_ids);
+
+
static struct spi_driver m25p80_driver = {
.driver = {
.name = "m25p80",
.owner = THIS_MODULE,
},
- .id_table = spi_nor_ids,
+ .id_table = m25p_ids,
.probe = m25p_probe,
.remove = m25p_remove,
if (!info) {
dev_err(dev, "Unable to configure elm - device not probed?\n");
- return -ENODEV;
+ return -EPROBE_DEFER;
}
/* ELM cannot detect ECC errors for chunks > 1KB */
if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) {
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
- const struct spi_device_id *id;
char modalias[40];
/* skip the holes */
if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
goto map_failed;
- id = spi_nor_match_id(modalias);
- if (!id)
- goto map_failed;
-
ret = of_property_read_u32(np, "spi-max-frequency",
&q->clk_rate);
if (ret < 0)
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
if (ret)
goto map_failed;
#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
+static const struct spi_device_id *spi_nor_match_id(const char *name);
+
/*
* Read the status register, returning its value in the location
* Return the status register value.
* more nor chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
*/
-const struct spi_device_id spi_nor_ids[] = {
+static const struct spi_device_id spi_nor_ids[] = {
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
{ "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) },
{ "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ },
};
-EXPORT_SYMBOL_GPL(spi_nor_ids);
static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
{
return 0;
}
-int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
- enum read_mode mode)
+int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
{
+ const struct spi_device_id *id = NULL;
struct flash_info *info;
struct device *dev = nor->dev;
struct mtd_info *mtd = nor->mtd;
if (ret)
return ret;
+ id = spi_nor_match_id(name);
+ if (!id)
+ return -ENOENT;
+
info = (void *)id->driver_data;
if (info->jedec_id) {
}
EXPORT_SYMBOL_GPL(spi_nor_scan);
-const struct spi_device_id *spi_nor_match_id(char *name)
+static const struct spi_device_id *spi_nor_match_id(const char *name)
{
const struct spi_device_id *id = spi_nor_ids;
}
return NULL;
}
-EXPORT_SYMBOL_GPL(spi_nor_match_id);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
config MACVTAP
tristate "MAC-VLAN based tap driver"
depends on MACVLAN
+ depends on INET
help
This adds a specialized tap character device driver that is based
on the MAC-VLAN network interface, called macvtap. A macvtap device
config TUN
tristate "Universal TUN/TAP device driver support"
+ depends on INET
select CRC32
---help---
TUN/TAP provides packet reception and transmission for user space
}
struct dsa_switch_driver mv88e6171_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_DSA,
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
.priv_size = sizeof(struct mv88e6xxx_priv_state),
.probe = mv88e6171_probe,
.setup = mv88e6171_setup,
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
- unsigned int rxcsum, rxvlan, rxvlan_filter;
+ netdev_features_t rxcsum, rxvlan, rxvlan_filter;
rxcsum = pdata->netdev_features & NETIF_F_RXCSUM;
rxvlan = pdata->netdev_features & NETIF_F_HW_VLAN_CTAG_RX;
struct skb_shared_hwtstamps *hwtstamps;
unsigned int incomplete, error, context_next, context;
unsigned int len, put_len, max_len;
- int received = 0;
+ unsigned int received = 0;
+ int packet_count = 0;
DBGPR("-->xgbe_rx_poll: budget=%d\n", budget);
rdata = XGBE_GET_DESC_DATA(ring, ring->cur);
packet = &ring->packet_data;
- while (received < budget) {
+ while (packet_count < budget) {
DBGPR(" cur = %d\n", ring->cur);
/* First time in loop see if we need to restore state */
if (packet->errors)
DBGPR("Error in received packet\n");
dev_kfree_skb(skb);
- continue;
+ goto next_packet;
}
if (!context) {
}
dev_kfree_skb(skb);
- continue;
+ goto next_packet;
}
memcpy(skb_tail_pointer(skb), rdata->skb->data,
put_len);
/* Stray Context Descriptor? */
if (!skb)
- continue;
+ goto next_packet;
/* Be sure we don't exceed the configured MTU */
max_len = netdev->mtu + ETH_HLEN;
if (skb->len > max_len) {
DBGPR("packet length exceeds configured MTU\n");
dev_kfree_skb(skb);
- continue;
+ goto next_packet;
}
#ifdef XGMAC_ENABLE_RX_PKT_DUMP
netdev->last_rx = jiffies;
napi_gro_receive(&pdata->napi, skb);
+
+next_packet:
+ packet_count++;
}
/* Check if we need to save state before leaving */
rdata->state.error = error;
}
- DBGPR("<--xgbe_rx_poll: received = %d\n", received);
+ DBGPR("<--xgbe_rx_poll: packet_count = %d\n", packet_count);
- return received;
+ return packet_count;
}
static int xgbe_poll(struct napi_struct *napi, int budget)
{
struct net_device *ndev = p->ndev;
u32 data;
- int i;
+ int i = 0;
xgene_enet_wr_diag_csr(p, ENET_CFG_MEM_RAM_SHUTDOWN_ADDR, 0);
- for (i = 0; i < 10 && data != ~0U ; i++) {
+ do {
usleep_range(100, 110);
data = xgene_enet_rd_diag_csr(p, ENET_BLOCK_MEM_RDY_ADDR);
- }
+ if (data == ~0U)
+ return 0;
+ } while (++i < 10);
- if (data != ~0U) {
- netdev_err(ndev, "Failed to release memory from shutdown\n");
- return -ENODEV;
- }
-
- return 0;
+ netdev_err(ndev, "Failed to release memory from shutdown\n");
+ return -ENODEV;
}
static void xgene_enet_config_ring_if_assoc(struct xgene_enet_pdata *p)
/* Enable NAPI */
napi_enable(&priv->napi);
+ /* Enable RX interrupt and TX ring full interrupt */
+ intrl2_0_mask_clear(priv, INTRL2_0_RDMA_MBDONE | INTRL2_0_TX_RING_FULL);
+
phy_start(priv->phydev);
/* Enable TX interrupts for the 32 TXQs */
if (ret)
goto out_free_rx_ring;
- /* Enable RX interrupt and TX ring full interrupt */
- intrl2_0_mask_clear(priv, INTRL2_0_RDMA_MBDONE | INTRL2_0_TX_RING_FULL);
-
/* Turn on TDMA */
ret = tdma_enable_set(priv, 1);
if (ret)
if (!netif_running(dev))
return 0;
+ umac_reset(priv);
+
/* We may have been suspended and never received a WOL event that
* would turn off MPD detection, take care of that now
*/
netif_device_attach(dev);
- /* Enable RX interrupt and TX ring full interrupt */
- intrl2_0_mask_clear(priv, INTRL2_0_RDMA_MBDONE | INTRL2_0_TX_RING_FULL);
-
/* RX pipe enable */
topctrl_writel(priv, 0, RX_FLUSH_CNTL);
if (l5_cid >= MAX_CM_SK_TBL_SZ)
break;
- rcu_read_lock();
if (!rcu_access_pointer(cp->ulp_ops[CNIC_ULP_L4])) {
rc = -ENODEV;
- rcu_read_unlock();
break;
}
csk = &cp->csk_tbl[l5_cid];
}
}
csk_put(csk);
- rcu_read_unlock();
rc = 0;
}
}
cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
mutex_lock(&cnic_lock);
- if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+ if (rcu_access_pointer(cp->ulp_ops[ulp_type])) {
RCU_INIT_POINTER(cp->ulp_ops[ulp_type], NULL);
cnic_put(dev);
} else {
dcb->dcb_version = FW_PORT_DCB_VER_AUTO;
}
+static void cxgb4_dcb_cleanup_apps(struct net_device *dev)
+{
+ struct port_info *pi = netdev2pinfo(dev);
+ struct adapter *adap = pi->adapter;
+ struct port_dcb_info *dcb = &pi->dcb;
+ struct dcb_app app;
+ int i, err;
+
+ /* zero priority implies remove */
+ app.priority = 0;
+
+ for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) {
+ /* Check if app list is exhausted */
+ if (!dcb->app_priority[i].protocolid)
+ break;
+
+ app.protocol = dcb->app_priority[i].protocolid;
+
+ if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE) {
+ app.selector = dcb->app_priority[i].sel_field + 1;
+ err = dcb_ieee_setapp(dev, &app);
+ } else {
+ app.selector = !!(dcb->app_priority[i].sel_field);
+ err = dcb_setapp(dev, &app);
+ }
+
+ if (err) {
+ dev_err(adap->pdev_dev,
+ "Failed DCB Clear %s Application Priority: sel=%d, prot=%d, , err=%d\n",
+ dcb_ver_array[dcb->dcb_version], app.selector,
+ app.protocol, -err);
+ break;
+ }
+ }
+}
+
/* Finite State machine for Data Center Bridging.
*/
void cxgb4_dcb_state_fsm(struct net_device *dev,
/* we're going to use Host DCB */
dcb->state = CXGB4_DCB_STATE_HOST;
dcb->supported = CXGB4_DCBX_HOST_SUPPORT;
- dcb->enabled = 1;
break;
}
* state. We need to reset back to a ground state
* of incomplete.
*/
+ cxgb4_dcb_cleanup_apps(dev);
cxgb4_dcb_state_init(dev);
dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
dcb->supported = CXGB4_DCBX_FW_SUPPORT;
{
struct port_info *pi = netdev2pinfo(dev);
+ /* If DCBx is host-managed, dcb is enabled by outside lldp agents */
+ if (pi->dcb.state == CXGB4_DCB_STATE_HOST) {
+ pi->dcb.enabled = enabled;
+ return 0;
+ }
+
/* Firmware doesn't provide any mechanism to control the DCB state.
*/
if (enabled != (pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED))
/* Return whether IEEE Data Center Bridging has been negotiated.
*/
-static inline int cxgb4_ieee_negotiation_complete(struct net_device *dev)
+static inline int
+cxgb4_ieee_negotiation_complete(struct net_device *dev,
+ enum cxgb4_dcb_fw_msgs dcb_subtype)
{
struct port_info *pi = netdev2pinfo(dev);
struct port_dcb_info *dcb = &pi->dcb;
+ if (dcb_subtype && !(dcb->msgs & dcb_subtype))
+ return 0;
+
return (dcb->state == CXGB4_DCB_STATE_FW_ALLSYNCED &&
(dcb->supported & DCB_CAP_DCBX_VER_IEEE));
}
{
int prio;
- if (!cxgb4_ieee_negotiation_complete(dev))
+ if (!cxgb4_ieee_negotiation_complete(dev, CXGB4_DCB_FW_APP_ID))
return -EINVAL;
if (!(app->selector && app->protocol))
return -EINVAL;
{
int ret;
- if (!cxgb4_ieee_negotiation_complete(dev))
+ if (!cxgb4_ieee_negotiation_complete(dev, CXGB4_DCB_FW_APP_ID))
return -EINVAL;
if (!(app->selector && app->protocol))
return -EINVAL;
#ifdef CONFIG_CHELSIO_T4_DCB
struct port_info *pi = netdev_priv(dev);
- return pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED;
+ if (!pi->dcb.enabled)
+ return 0;
+
+ return ((pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED) ||
+ (pi->dcb.state == CXGB4_DCB_STATE_HOST));
#else
return 0;
#endif
spin_lock_init(&adapter->stats_lock);
spin_lock_init(&adapter->tid_release_lock);
+ spin_lock_init(&adapter->win0_lock);
INIT_WORK(&adapter->tid_release_task, process_tid_release_list);
INIT_WORK(&adapter->db_full_task, process_db_full);
CH_DEVICE(0x480d), /* T480-cr */
CH_DEVICE(0x480e), /* T440-lp-cr */
CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
+ CH_DEVICE(0x4881),
+ CH_DEVICE(0x4882),
+ CH_DEVICE(0x4883),
+ CH_DEVICE(0x4884),
+ CH_DEVICE(0x4885),
+ CH_DEVICE(0x4886),
+ CH_DEVICE(0x4887),
+ CH_DEVICE(0x4888),
CH_DEVICE(0x5801), /* T520-cr */
CH_DEVICE(0x5802), /* T522-cr */
CH_DEVICE(0x5803), /* T540-cr */
int i;
enic_rfs_timer_stop(enic);
- spin_lock(&enic->rfs_h.lock);
+ spin_lock_bh(&enic->rfs_h.lock);
enic->rfs_h.free = 0;
for (i = 0; i < (1 << ENIC_RFS_FLW_BITSHIFT); i++) {
struct hlist_head *hhead;
kfree(n);
}
}
- spin_unlock(&enic->rfs_h.lock);
+ spin_unlock_bh(&enic->rfs_h.lock);
}
struct enic_rfs_fltr_node *htbl_fltr_search(struct enic *enic, u16 fltr_id)
bool res;
int j;
- spin_lock(&enic->rfs_h.lock);
+ spin_lock_bh(&enic->rfs_h.lock);
for (j = 0; j < ENIC_CLSF_EXPIRE_COUNT; j++) {
struct hlist_head *hhead;
struct hlist_node *tmp;
}
}
}
- spin_unlock(&enic->rfs_h.lock);
+ spin_unlock_bh(&enic->rfs_h.lock);
mod_timer(&enic->rfs_h.rfs_may_expire, jiffies + HZ/4);
}
return -EPROTONOSUPPORT;
tbl_idx = skb_get_hash_raw(skb) & ENIC_RFS_FLW_MASK;
- spin_lock(&enic->rfs_h.lock);
+ spin_lock_bh(&enic->rfs_h.lock);
n = htbl_key_search(&enic->rfs_h.ht_head[tbl_idx], &keys);
if (n) { /* entry already present */
}
ret_unlock:
- spin_unlock(&enic->rfs_h.lock);
+ spin_unlock_bh(&enic->rfs_h.lock);
return res;
}
enic_dev_disable(enic);
- local_bh_disable();
for (i = 0; i < enic->rq_count; i++) {
napi_disable(&enic->napi[i]);
+ local_bh_disable();
while (!enic_poll_lock_napi(&enic->rq[i]))
mdelay(1);
+ local_bh_enable();
}
- local_bh_enable();
netif_carrier_off(netdev);
netif_tx_disable(netdev);
complete(&fep->mdio_done);
}
- fec_ptp_check_pps_event(fep);
+ if (fep->ptp_clock)
+ fec_ptp_check_pps_event(fep);
return ret;
}
FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
}
+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
/*
* Enable interrupts we wish to service.
*/
if (fep->phydev->duplex)
S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE);
+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
NETIF_F_HW_CSUM |
NETIF_F_SG);
- netdev->priv_flags |= IFF_UNICAST_FLT;
+ /* Do not set IFF_UNICAST_FLT for VMWare's 82545EM */
+ if (hw->device_id != E1000_DEV_ID_82545EM_COPPER ||
+ hw->subsystem_vendor_id != PCI_VENDOR_ID_VMWARE)
+ netdev->priv_flags |= IFF_UNICAST_FLT;
adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
I40E_GL_MDET_TX_PF_NUM_SHIFT;
u8 vf_num = (reg & I40E_GL_MDET_TX_VF_NUM_MASK) >>
I40E_GL_MDET_TX_VF_NUM_SHIFT;
- u8 event = (reg & I40E_GL_MDET_TX_EVENT_SHIFT) >>
+ u8 event = (reg & I40E_GL_MDET_TX_EVENT_MASK) >>
I40E_GL_MDET_TX_EVENT_SHIFT;
u8 queue = (reg & I40E_GL_MDET_TX_QUEUE_MASK) >>
I40E_GL_MDET_TX_QUEUE_SHIFT;
if (reg & I40E_GL_MDET_RX_VALID_MASK) {
u8 func = (reg & I40E_GL_MDET_RX_FUNCTION_MASK) >>
I40E_GL_MDET_RX_FUNCTION_SHIFT;
- u8 event = (reg & I40E_GL_MDET_RX_EVENT_SHIFT) >>
+ u8 event = (reg & I40E_GL_MDET_RX_EVENT_MASK) >>
I40E_GL_MDET_RX_EVENT_SHIFT;
u8 queue = (reg & I40E_GL_MDET_RX_QUEUE_MASK) >>
I40E_GL_MDET_RX_QUEUE_SHIFT;
if (unlikely(page_to_nid(page) != numa_node_id()))
return false;
+ if (unlikely(page->pfmemalloc))
+ return false;
+
#if (PAGE_SIZE < 8192)
/* if we are only owner of page we can reuse it */
if (unlikely(page_count(page) != 1))
memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
/* we can reuse buffer as-is, just make sure it is local */
- if (likely(page_to_nid(page) == numa_node_id()))
+ if (likely((page_to_nid(page) == numa_node_id()) &&
+ !page->pfmemalloc))
return true;
/* this page cannot be reused so discard it */
if (old == advertised)
return err;
/* this sets the link speed and restarts auto-neg */
+ while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ usleep_range(1000, 2000);
+
hw->mac.autotry_restart = true;
err = hw->mac.ops.setup_link(hw, advertised, true);
if (err) {
e_info(probe, "setup link failed with code %d\n", err);
hw->mac.ops.setup_link(hw, old, true);
}
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
} else {
/* in this case we currently only support 10Gb/FULL */
u32 speed = ethtool_cmd_speed(ecmd);
IXGBE_CB(skb)->page_released = false;
}
dev_kfree_skb(skb);
+ rx_buffer->skb = NULL;
}
- rx_buffer->skb = NULL;
if (rx_buffer->dma)
dma_unmap_page(dev, rx_buffer->dma,
ixgbe_rx_pg_size(rx_ring),
* whether LSO is used */
tx_desc->ctrl.srcrb_flags = priv->ctrl_flags;
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
- tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM |
- MLX4_WQE_CTRL_TCP_UDP_CSUM);
+ if (!skb->encapsulation)
+ tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM |
+ MLX4_WQE_CTRL_TCP_UDP_CSUM);
+ else
+ tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM);
ring->tx_csum++;
}
pr_cont("\n");
}
}
+ synchronize_irq(eq->irq);
mlx4_mtt_cleanup(dev, &eq->mtt);
for (i = 0; i < npages; ++i)
cur->ib.dst_gid_msk);
break;
+ case MLX4_NET_TRANS_RULE_ID_VXLAN:
+ len += snprintf(buf + len, BUF_SIZE - len,
+ "VNID = %d ", be32_to_cpu(cur->vxlan.vni));
+ break;
case MLX4_NET_TRANS_RULE_ID_IPV6:
break;
if (err)
mlx5_core_warn(dev, "failed to destroy a previously created eq: eqn %d\n",
eq->eqn);
+ synchronize_irq(table->msix_arr[eq->irqn].vector);
mlx5_buf_free(dev, &eq->buf);
return err;
unsigned short dma_flags;
int i = 0;
- EFX_BUG_ON_PARANOID(tx_queue->write_count > tx_queue->insert_count);
-
if (skb_shinfo(skb)->gso_size)
return efx_enqueue_skb_tso(tx_queue, skb);
/* Find the packet protocol and sanity-check it */
state.protocol = efx_tso_check_protocol(skb);
- EFX_BUG_ON_PARANOID(tx_queue->write_count > tx_queue->insert_count);
-
rc = tso_start(&state, efx, skb);
if (rc)
goto mem_err;
#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
{},
};
MODULE_DEVICE_TABLE(of, smc91x_match);
+
+/**
+ * of_try_set_control_gpio - configure a gpio if it exists
+ */
+static int try_toggle_control_gpio(struct device *dev,
+ struct gpio_desc **desc,
+ const char *name, int index,
+ int value, unsigned int nsdelay)
+{
+ struct gpio_desc *gpio = *desc;
+ int res;
+
+ gpio = devm_gpiod_get_index(dev, name, index);
+ if (IS_ERR(gpio)) {
+ if (PTR_ERR(gpio) == -ENOENT) {
+ *desc = NULL;
+ return 0;
+ }
+
+ return PTR_ERR(gpio);
+ }
+ res = gpiod_direction_output(gpio, !value);
+ if (res) {
+ dev_err(dev, "unable to toggle gpio %s: %i\n", name, res);
+ devm_gpiod_put(dev, gpio);
+ gpio = NULL;
+ return res;
+ }
+ if (nsdelay)
+ usleep_range(nsdelay, 2 * nsdelay);
+ gpiod_set_value_cansleep(gpio, value);
+ *desc = gpio;
+
+ return 0;
+}
#endif
/*
struct device_node *np = pdev->dev.of_node;
u32 val;
+ /* Optional pwrdwn GPIO configured? */
+ ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio,
+ "power", 0, 0, 100);
+ if (ret)
+ return ret;
+
+ /*
+ * Optional reset GPIO configured? Minimum 100 ns reset needed
+ * according to LAN91C96 datasheet page 14.
+ */
+ ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio,
+ "reset", 0, 0, 100);
+ if (ret)
+ return ret;
+
+ /*
+ * Need to wait for optional EEPROM to load, max 750 us according
+ * to LAN91C96 datasheet page 55.
+ */
+ if (lp->reset_gpio)
+ usleep_range(750, 1000);
+
/* Combination of IO widths supported, default to 16-bit */
if (!of_property_read_u32(np, "reg-io-width", &val)) {
if (val & 1)
struct sk_buff *pending_tx_skb;
struct tasklet_struct tx_task;
+ struct gpio_desc *power_gpio;
+ struct gpio_desc *reset_gpio;
+
/* version/revision of the SMC91x chip */
int version;
static void stmmac_default_data(void)
{
memset(&plat_dat, 0, sizeof(struct plat_stmmacenet_data));
+
plat_dat.bus_id = 1;
plat_dat.phy_addr = 0;
plat_dat.interface = PHY_INTERFACE_MODE_GMII;
dma_cfg.pbl = 32;
dma_cfg.burst_len = DMA_AXI_BLEN_256;
plat_dat.dma_cfg = &dma_cfg;
+
+ /* Set default value for multicast hash bins */
+ plat_dat.multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat_dat.unicast_filter_entries = 1;
}
/**
if (enable) {
unsigned long timeout = jiffies + HZ;
- /* Disable Learn for all ports */
- for (i = 0; i < priv->data.slaves; i++) {
+ /* Disable Learn for all ports (host is port 0 and slaves are port 1 and up */
+ for (i = 0; i <= priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 1);
cpsw_ale_control_set(ale, i,
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
dev_dbg(&ndev->dev, "promiscuity enabled\n");
} else {
- /* Flood All Unicast Packets to Host port */
+ /* Don't Flood All Unicast Packets to Host port */
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 0);
- /* Enable Learn for all ports */
- for (i = 0; i < priv->data.slaves; i++) {
+ /* Enable Learn for all ports (host is port 0 and slaves are port 1 and up */
+ for (i = 0; i <= priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 0);
cpsw_ale_control_set(ale, i,
if (ndev->flags & IFF_PROMISC) {
/* Enable promiscuous mode */
cpsw_set_promiscious(ndev, true);
+ cpsw_ale_set_allmulti(priv->ale, IFF_ALLMULTI);
return;
} else {
/* Disable promiscuous mode */
cpsw_set_promiscious(ndev, false);
}
+ /* Restore allmulti on vlans if necessary */
+ cpsw_ale_set_allmulti(priv->ale, priv->ndev->flags & IFF_ALLMULTI);
+
/* Clear all mcast from ALE */
cpsw_ale_flush_multicast(priv->ale, ALE_ALL_PORTS << priv->host_port);
const int port = priv->host_port;
u32 reg;
int i;
+ int unreg_mcast_mask;
reg = (priv->version == CPSW_VERSION_1) ? CPSW1_PORT_VLAN :
CPSW2_PORT_VLAN;
for (i = 0; i < priv->data.slaves; i++)
slave_write(priv->slaves + i, vlan, reg);
+ if (priv->ndev->flags & IFF_ALLMULTI)
+ unreg_mcast_mask = ALE_ALL_PORTS;
+ else
+ unreg_mcast_mask = ALE_PORT_1 | ALE_PORT_2;
+
cpsw_ale_add_vlan(priv->ale, vlan, ALE_ALL_PORTS << port,
ALE_ALL_PORTS << port, ALE_ALL_PORTS << port,
- (ALE_PORT_1 | ALE_PORT_2) << port);
+ unreg_mcast_mask << port);
}
static void cpsw_init_host_port(struct cpsw_priv *priv)
unsigned short vid)
{
int ret;
+ int unreg_mcast_mask;
+
+ if (priv->ndev->flags & IFF_ALLMULTI)
+ unreg_mcast_mask = ALE_ALL_PORTS;
+ else
+ unreg_mcast_mask = ALE_PORT_1 | ALE_PORT_2;
ret = cpsw_ale_add_vlan(priv->ale, vid,
ALE_ALL_PORTS << priv->host_port,
0, ALE_ALL_PORTS << priv->host_port,
- (ALE_PORT_1 | ALE_PORT_2) << priv->host_port);
+ unreg_mcast_mask << priv->host_port);
if (ret != 0)
return ret;
parp = of_get_property(slave_node, "phy_id", &lenp);
if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i);
- return -EINVAL;
+ goto no_phy_slave;
}
mdio_node = of_find_node_by_phandle(be32_to_cpup(parp));
phyid = be32_to_cpup(parp+1);
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
+ slave_data->phy_if = of_get_phy_mode(slave_node);
+ if (slave_data->phy_if < 0) {
+ dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n",
+ i);
+ return slave_data->phy_if;
+ }
+
+no_phy_slave:
mac_addr = of_get_mac_address(slave_node);
if (mac_addr) {
memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
return ret;
}
}
-
- slave_data->phy_if = of_get_phy_mode(slave_node);
- if (slave_data->phy_if < 0) {
- dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n",
- i);
- return slave_data->phy_if;
- }
-
if (data->dual_emac) {
if (of_property_read_u32(slave_node, "dual_emac_res_vlan",
&prop)) {
return 0;
}
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti)
+{
+ u32 ale_entry[ALE_ENTRY_WORDS];
+ int type, idx;
+ int unreg_mcast = 0;
+
+ /* Only bother doing the work if the setting is actually changing */
+ if (ale->allmulti == allmulti)
+ return;
+
+ /* Remember the new setting to check against next time */
+ ale->allmulti = allmulti;
+
+ for (idx = 0; idx < ale->params.ale_entries; idx++) {
+ cpsw_ale_read(ale, idx, ale_entry);
+ type = cpsw_ale_get_entry_type(ale_entry);
+ if (type != ALE_TYPE_VLAN)
+ continue;
+
+ unreg_mcast = cpsw_ale_get_vlan_unreg_mcast(ale_entry);
+ if (allmulti)
+ unreg_mcast |= 1;
+ else
+ unreg_mcast &= ~1;
+ cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast);
+ cpsw_ale_write(ale, idx, ale_entry);
+ }
+}
+
struct ale_control_info {
const char *name;
int offset, port_offset;
struct cpsw_ale_params params;
struct timer_list timer;
unsigned long ageout;
+ int allmulti;
};
enum cpsw_ale_control {
int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
int reg_mcast, int unreg_mcast);
int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port);
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti);
int cpsw_ale_control_get(struct cpsw_ale *ale, int port, int control);
int cpsw_ale_control_set(struct cpsw_ale *ale, int port,
do_send:
/* Start filling in the page buffers with the rndis hdr */
rndis_msg->msg_len += rndis_msg_size;
+ packet->total_data_buflen = rndis_msg->msg_len;
packet->page_buf_cnt = init_page_array(rndis_msg, rndis_msg_size,
skb, &packet->page_buf[0]);
struct sk_buff *skb;
struct sk_buff_head list;
- skb_queue_head_init(&list);
+ __skb_queue_head_init(&list);
spin_lock_bh(&port->bc_queue.lock);
skb_queue_splice_tail_init(&port->bc_queue, &list);
{
struct macvlan_port *port = macvlan_port_get_rtnl(dev);
- cancel_work_sync(&port->bc_work);
dev->priv_flags &= ~IFF_MACVLAN_PORT;
netdev_rx_handler_unregister(dev);
+
+ /* After this point, no packet can schedule bc_work anymore,
+ * but we need to cancel it and purge left skbs if any.
+ */
+ cancel_work_sync(&port->bc_work);
+ __skb_queue_purge(&port->bc_queue);
+
kfree_rcu(port, rcu);
}
#include <linux/idr.h>
#include <linux/fs.h>
+#include <net/ipv6.h>
#include <net/net_namespace.h>
#include <net/rtnetlink.h>
#include <net/sock.h>
static const struct proto_ops macvtap_socket_ops;
#define TUN_OFFLOADS (NETIF_F_HW_CSUM | NETIF_F_TSO_ECN | NETIF_F_TSO | \
- NETIF_F_TSO6 | NETIF_F_UFO)
+ NETIF_F_TSO6)
#define RX_OFFLOADS (NETIF_F_GRO | NETIF_F_LRO)
#define TAP_FEATURES (NETIF_F_GSO | NETIF_F_SG)
gso_type = SKB_GSO_TCPV6;
break;
case VIRTIO_NET_HDR_GSO_UDP:
+ pr_warn_once("macvtap: %s: using disabled UFO feature; please fix this program\n",
+ current->comm);
gso_type = SKB_GSO_UDP;
+ if (skb->protocol == htons(ETH_P_IPV6))
+ ipv6_proxy_select_ident(skb);
break;
default:
return -EINVAL;
vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (sinfo->gso_type & SKB_GSO_TCPV6)
vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
- else if (sinfo->gso_type & SKB_GSO_UDP)
- vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP;
else
BUG();
if (sinfo->gso_type & SKB_GSO_TCP_ECN)
if (arg & TUN_F_TSO6)
feature_mask |= NETIF_F_TSO6;
}
-
- if (arg & TUN_F_UFO)
- feature_mask |= NETIF_F_UFO;
}
/* tun/tap driver inverts the usage for TSO offloads, where
* When user space turns off TSO, we turn off GSO/LRO so that
* user-space will not receive TSO frames.
*/
- if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_UFO))
+ if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6))
features |= RX_OFFLOADS;
else
features &= ~RX_OFFLOADS;
case TUNSETOFFLOAD:
/* let the user check for future flags */
if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
- TUN_F_TSO_ECN | TUN_F_UFO))
+ TUN_F_TSO_ECN))
return -EINVAL;
rtnl_lock();
#define MII_M1011_PHY_SCR 0x10
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
+#define MII_M1145_PHY_EXT_SR 0x1b
#define MII_M1145_PHY_EXT_CR 0x14
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
+#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1145_HWCFG_MODE_MASK 0xf
+#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
+
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
}
}
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ int temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~MII_M1145_HWCFG_MODE_MASK;
+ temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
#include <linux/nsproxy.h>
#include <linux/virtio_net.h>
#include <linux/rcupdate.h>
+#include <net/ipv6.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <net/rtnetlink.h>
struct net_device *dev;
netdev_features_t set_features;
#define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \
- NETIF_F_TSO6|NETIF_F_UFO)
+ NETIF_F_TSO6)
int vnet_hdr_sz;
int sndbuf;
break;
}
+ skb_reset_network_header(skb);
+
if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
break;
case VIRTIO_NET_HDR_GSO_UDP:
+ {
+ static bool warned;
+
+ if (!warned) {
+ warned = true;
+ netdev_warn(tun->dev,
+ "%s: using disabled UFO feature; please fix this program\n",
+ current->comm);
+ }
skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
+ if (skb->protocol == htons(ETH_P_IPV6))
+ ipv6_proxy_select_ident(skb);
break;
+ }
default:
tun->dev->stats.rx_frame_errors++;
kfree_skb(skb);
skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG;
}
- skb_reset_network_header(skb);
skb_probe_transport_header(skb, 0);
rxhash = skb_get_hash(skb);
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (sinfo->gso_type & SKB_GSO_TCPV6)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
- else if (sinfo->gso_type & SKB_GSO_UDP)
- gso.gso_type = VIRTIO_NET_HDR_GSO_UDP;
else {
pr_err("unexpected GSO type: "
"0x%x, gso_size %d, hdr_len %d\n",
features |= NETIF_F_TSO6;
arg &= ~(TUN_F_TSO4|TUN_F_TSO6);
}
-
- if (arg & TUN_F_UFO) {
- features |= NETIF_F_UFO;
- arg &= ~TUN_F_UFO;
- }
}
/* This gives the user a way to test for new features in future by
{
struct usbnet *dev = netdev_priv(net);
struct sockaddr *addr = p;
+ int ret;
if (netif_running(net))
return -EBUSY;
memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
/* Set the MAC address */
- return ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+ ret = ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
ETH_ALEN, net->dev_addr);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static const struct net_device_ops ax88179_netdev_ops = {
0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
};
+static void usbnet_cdc_update_filter(struct usbnet *dev)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ struct usb_interface *intf = info->control;
+
+ u16 cdc_filter =
+ USB_CDC_PACKET_TYPE_ALL_MULTICAST | USB_CDC_PACKET_TYPE_DIRECTED |
+ USB_CDC_PACKET_TYPE_BROADCAST;
+
+ if (dev->net->flags & IFF_PROMISC)
+ cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
+
+ /* FIXME cdc-ether has some multicast code too, though it complains
+ * in routine cases. info->ether describes the multicast support.
+ * Implement that here, manipulating the cdc filter as needed.
+ */
+
+ usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SET_ETHERNET_PACKET_FILTER,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ cdc_filter,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ NULL,
+ 0,
+ USB_CTRL_SET_TIMEOUT
+ );
+}
+
/* probes control interface, claims data interface, collects the bulk
* endpoints, activates data interface (if needed), maybe sets MTU.
* all pure cdc, except for certain firmware workarounds, and knowing
* don't do reset all the way. So the packet filter should
* be set to a sane initial value.
*/
- usb_control_msg(dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- USB_CDC_SET_ETHERNET_PACKET_FILTER,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- USB_CDC_PACKET_TYPE_ALL_MULTICAST | USB_CDC_PACKET_TYPE_DIRECTED | USB_CDC_PACKET_TYPE_BROADCAST,
- intf->cur_altsetting->desc.bInterfaceNumber,
- NULL,
- 0,
- USB_CTRL_SET_TIMEOUT
- );
+ usbnet_cdc_update_filter(dev);
+
return 0;
bad_desc:
return status;
}
- /* FIXME cdc-ether has some multicast code too, though it complains
- * in routine cases. info->ether describes the multicast support.
- * Implement that here, manipulating the cdc filter as needed.
- */
return 0;
}
EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
.bind = usbnet_cdc_bind,
.unbind = usbnet_cdc_unbind,
.status = usbnet_cdc_status,
+ .set_rx_mode = usbnet_cdc_update_filter,
.manage_power = usbnet_manage_power,
};
.bind = usbnet_cdc_bind,
.unbind = usbnet_cdc_unbind,
.status = usbnet_cdc_status,
+ .set_rx_mode = usbnet_cdc_update_filter,
.manage_power = usbnet_manage_power,
};
case -ESHUTDOWN:
netif_device_detach(tp->netdev);
case -ENOENT:
+ case -EPROTO:
+ netif_info(tp, intr, tp->netdev,
+ "Stop submitting intr, status %d\n", status);
return;
case -EOVERFLOW:
netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n");
if (res)
goto out;
+ /* set speed to 0 to avoid autoresume try to submit rx */
+ tp->speed = 0;
+
res = usb_autopm_get_interface(tp->intf);
if (res < 0) {
free_all_mem(tp);
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
+
+ /* disable the tx/rx, if the workqueue has enabled them. */
if (tp->speed & LINK_STATUS)
tp->rtl_ops.disable(tp);
}
* be disable when autoresume occurs, because the
* netif_running() would be false.
*/
- if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
- rtl_runtime_suspend_enable(tp, false);
- clear_bit(SELECTIVE_SUSPEND, &tp->flags);
- }
+ rtl_runtime_suspend_enable(tp, false);
tasklet_disable(&tp->tl);
tp->rtl_ops.down(tp);
netif_device_detach(netdev);
}
- if (netif_running(netdev)) {
+ if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
tasklet_disable(&tp->tl);
set_bit(WORK_ENABLE, &tp->flags);
}
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+ } else if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+ clear_bit(SELECTIVE_SUSPEND, &tp->flags);
}
mutex_unlock(&tp->control);
clear_bit(EVENT_LINK_CHANGE, &dev->flags);
}
+static void usbnet_set_rx_mode(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ usbnet_defer_kevent(dev, EVENT_SET_RX_MODE);
+}
+
+static void __handle_set_rx_mode(struct usbnet *dev)
+{
+ if (dev->driver_info->set_rx_mode)
+ (dev->driver_info->set_rx_mode)(dev);
+
+ clear_bit(EVENT_SET_RX_MODE, &dev->flags);
+}
+
/* work that cannot be done in interrupt context uses keventd.
*
* NOTE: with 2.5 we could do more of this using completion callbacks,
if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
__handle_link_change(dev);
+ if (test_bit (EVENT_SET_RX_MODE, &dev->flags))
+ __handle_set_rx_mode(dev);
+
+
if (dev->flags)
netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
}
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_set_rx_mode = usbnet_set_rx_mode,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
break;
case VIRTIO_NET_HDR_GSO_UDP:
+ {
+ static bool warned;
+
+ if (!warned) {
+ warned = true;
+ netdev_warn(dev,
+ "host using disabled UFO feature; please fix it\n");
+ }
skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
break;
+ }
case VIRTIO_NET_HDR_GSO_TCPV6:
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
break;
hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
- else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
- hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_UDP;
else
BUG();
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN)
dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
if (virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
- dev->hw_features |= NETIF_F_TSO | NETIF_F_UFO
+ dev->hw_features |= NETIF_F_TSO
| NETIF_F_TSO_ECN | NETIF_F_TSO6;
}
/* Individual feature bits: what can host handle? */
dev->hw_features |= NETIF_F_TSO6;
if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
dev->hw_features |= NETIF_F_TSO_ECN;
- if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
- dev->hw_features |= NETIF_F_UFO;
if (gso)
- dev->features |= dev->hw_features & (NETIF_F_ALL_TSO|NETIF_F_UFO);
+ dev->features |= dev->hw_features & NETIF_F_ALL_TSO;
/* (!csum && gso) case will be fixed by register_netdev() */
}
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_CSUM))
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) ||
- virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) ||
- virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO))
+ virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN))
vi->big_packets = true;
if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
static unsigned int features[] = {
VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM,
VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
- VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
+ VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_TSO6,
VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
- VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO,
+ VIRTIO_NET_F_GUEST_ECN,
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
struct ath_regulatory {
char alpha2[2];
+ enum nl80211_dfs_regions region;
u16 country_code;
u16 max_power_level;
u16 current_rd;
{
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
- if (reg->power_limit != new_txpow) {
+ if (reg->power_limit != new_txpow)
ath9k_hw_set_txpowerlimit(ah, new_txpow, false);
- /* read back in case value is clamped */
- *txpower = reg->max_power_level;
- }
+
+ /* read back in case value is clamped */
+ *txpower = reg->max_power_level;
}
EXPORT_SYMBOL(ath9k_cmn_update_txpow);
"%2d %2x %1x %2x %2x\n",
i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset,
(*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset + 3),
- val[2] & (0x7 << (i * 3)) >> (i * 3),
+ (val[2] & (0x7 << (i * 3))) >> (i * 3),
(*dcuBase & (0x1f << dcuOffset)) >> dcuOffset);
}
#endif
};
+#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
+static void ath9k_set_mcc_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (!ath9k_is_chanctx_enabled())
+ return;
+
+ hw->flags |= IEEE80211_HW_QUEUE_CONTROL;
+ hw->queues = ATH9K_NUM_TX_QUEUES;
+ hw->offchannel_tx_hw_queue = hw->queues - 1;
+ hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS);
+ hw->wiphy->iface_combinations = if_comb_multi;
+ hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi);
+ hw->wiphy->max_scan_ssids = 255;
+ hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+ hw->wiphy->max_remain_on_channel_duration = 10000;
+ hw->chanctx_data_size = sizeof(void *);
+ hw->extra_beacon_tailroom =
+ sizeof(struct ieee80211_p2p_noa_attr) + 9;
+
+ ath_dbg(common, CHAN_CTX, "Use channel contexts\n");
+}
+#endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
+
static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_SUPPORTS_RC_TABLE |
- IEEE80211_HW_QUEUE_CONTROL |
IEEE80211_HW_SUPPORTS_HT_CCK_RATES;
if (ath9k_ps_enable)
hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
}
-#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
-
- if (ath9k_is_chanctx_enabled()) {
- hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS);
- hw->wiphy->iface_combinations = if_comb_multi;
- hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi);
- hw->wiphy->max_scan_ssids = 255;
- hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
- hw->wiphy->max_remain_on_channel_duration = 10000;
- hw->chanctx_data_size = sizeof(void *);
- hw->extra_beacon_tailroom =
- sizeof(struct ieee80211_p2p_noa_attr) + 9;
-
- ath_dbg(common, CHAN_CTX, "Use channel contexts\n");
- }
-
-#endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
-
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
- /* allow 4 queues per channel context +
- * 1 cab queue + 1 offchannel tx queue
- */
- hw->queues = ATH9K_NUM_TX_QUEUES;
- /* last queue for offchannel */
- hw->offchannel_tx_hw_queue = hw->queues - 1;
+ hw->queues = 4;
hw->max_rates = 4;
hw->max_listen_interval = 10;
hw->max_rate_tries = 10;
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&common->sbands[IEEE80211_BAND_5GHZ];
+#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
+ ath9k_set_mcc_capab(sc, hw);
+#endif
ath9k_init_wow(hw);
ath9k_cmn_reload_chainmask(ah);
{
int i;
+ if (!ath9k_is_chanctx_enabled())
+ return;
+
for (i = 0; i < IEEE80211_NUM_ACS; i++)
vif->hw_queue[i] = i;
if (txq->stopped &&
txq->pending_frames < sc->tx.txq_max_pending[q]) {
- ieee80211_wake_queue(sc->hw, info->hw_queue);
+ if (ath9k_is_chanctx_enabled())
+ ieee80211_wake_queue(sc->hw, info->hw_queue);
+ else
+ ieee80211_wake_queue(sc->hw, q);
txq->stopped = false;
}
}
fi->txq = q;
if (++txq->pending_frames > sc->tx.txq_max_pending[q] &&
!txq->stopped) {
- ieee80211_stop_queue(sc->hw, info->hw_queue);
+ if (ath9k_is_chanctx_enabled())
+ ieee80211_stop_queue(sc->hw, info->hw_queue);
+ else
+ ieee80211_stop_queue(sc->hw, q);
txq->stopped = true;
}
}
if (!request)
return;
+ reg->region = request->dfs_region;
switch (request->initiator) {
case NL80211_REGDOM_SET_BY_CORE:
/*
return SD_NO_CTL;
}
+ if (ath_regd_get_eepromRD(reg) == CTRY_DEFAULT) {
+ switch (reg->region) {
+ case NL80211_DFS_FCC:
+ return CTL_FCC;
+ case NL80211_DFS_ETSI:
+ return CTL_ETSI;
+ case NL80211_DFS_JP:
+ return CTL_MKK;
+ default:
+ break;
+ }
+ }
+
switch (band) {
case IEEE80211_BAND_2GHZ:
return reg->regpair->reg_2ghz_ctl;
struct brcmf_sdio_dev *sdiodev)
{
int i;
- uint fw_len, nv_len;
char end;
for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) {
return -ENODEV;
}
- fw_len = sizeof(sdiodev->fw_name) - 1;
- nv_len = sizeof(sdiodev->nvram_name) - 1;
/* check if firmware path is provided by module parameter */
if (brcmf_firmware_path[0] != '\0') {
- strncpy(sdiodev->fw_name, brcmf_firmware_path, fw_len);
- strncpy(sdiodev->nvram_name, brcmf_firmware_path, nv_len);
- fw_len -= strlen(sdiodev->fw_name);
- nv_len -= strlen(sdiodev->nvram_name);
+ strlcpy(sdiodev->fw_name, brcmf_firmware_path,
+ sizeof(sdiodev->fw_name));
+ strlcpy(sdiodev->nvram_name, brcmf_firmware_path,
+ sizeof(sdiodev->nvram_name));
end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1];
if (end != '/') {
- strncat(sdiodev->fw_name, "/", fw_len);
- strncat(sdiodev->nvram_name, "/", nv_len);
- fw_len--;
- nv_len--;
+ strlcat(sdiodev->fw_name, "/",
+ sizeof(sdiodev->fw_name));
+ strlcat(sdiodev->nvram_name, "/",
+ sizeof(sdiodev->nvram_name));
}
}
- strncat(sdiodev->fw_name, brcmf_fwname_data[i].bin, fw_len);
- strncat(sdiodev->nvram_name, brcmf_fwname_data[i].nv, nv_len);
+ strlcat(sdiodev->fw_name, brcmf_fwname_data[i].bin,
+ sizeof(sdiodev->fw_name));
+ strlcat(sdiodev->nvram_name, brcmf_fwname_data[i].nv,
+ sizeof(sdiodev->nvram_name));
return 0;
}
u32 queues, bool drop)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+ u32 scd_queues;
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter\n");
goto done;
}
- /*
- * mac80211 will not push any more frames for transmit
- * until the flush is completed
- */
- if (drop) {
- IWL_DEBUG_MAC80211(priv, "send flush command\n");
- if (iwlagn_txfifo_flush(priv, 0)) {
- IWL_ERR(priv, "flush request fail\n");
- goto done;
- }
+ scd_queues = BIT(priv->cfg->base_params->num_of_queues) - 1;
+ scd_queues &= ~(BIT(IWL_IPAN_CMD_QUEUE_NUM) |
+ BIT(IWL_DEFAULT_CMD_QUEUE_NUM));
+
+ if (vif)
+ scd_queues &= ~BIT(vif->hw_queue[IEEE80211_AC_VO]);
+
+ IWL_DEBUG_TX_QUEUES(priv, "Flushing SCD queues: 0x%x\n", scd_queues);
+ if (iwlagn_txfifo_flush(priv, scd_queues)) {
+ IWL_ERR(priv, "flush request fail\n");
+ goto done;
}
- IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
+ IWL_DEBUG_TX_QUEUES(priv, "wait transmit/flush all frames\n");
iwl_trans_wait_tx_queue_empty(priv->trans, 0xffffffff);
done:
mutex_unlock(&priv->mutex);
#define IWL8000_TX_POWER_VERSION 0xffff /* meaningless */
#define IWL8000_FW_PRE "iwlwifi-8000"
-#define IWL8000_MODULE_FIRMWARE(api) IWL8000_FW_PRE __stringify(api) ".ucode"
+#define IWL8000_MODULE_FIRMWARE(api) \
+ IWL8000_FW_PRE "-" __stringify(api) ".ucode"
#define NVM_HW_SECTION_NUM_FAMILY_8000 10
#define DEFAULT_NVM_FILE_FAMILY_8000 "iwl_nvm_8000.bin"
* Set during transport allocation.
* @hw_id_str: a string with info about HW ID. Set during transport allocation.
* @pm_support: set to true in start_hw if link pm is supported
+ * @ltr_enabled: set to true if the LTR is enabled
* @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
* The user should use iwl_trans_{alloc,free}_tx_cmd.
* @dev_cmd_headroom: room needed for the transport's private use before the
u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
bool pm_support;
+ bool ltr_enabled;
/* The following fields are internal only */
struct kmem_cache *dev_cmd_pool;
};
static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = {
- cpu_to_le32(0x28412201),
- cpu_to_le32(0x11118451),
+ cpu_to_le32(0x2e402280),
+ cpu_to_le32(0x7711a751),
};
struct corunning_block_luts {
};
static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = {
- cpu_to_le32(0x28412201),
- cpu_to_le32(0x11118451),
+ cpu_to_le32(0x2e402280),
+ cpu_to_le32(0x7711a751),
};
struct corunning_block_luts {
/* Power Management Commands, Responses, Notifications */
+/**
+ * enum iwl_ltr_config_flags - masks for LTR config command flags
+ * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
+ * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
+ * memory access
+ * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
+ * reg change
+ * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
+ * D0 to D3
+ * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
+ * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
+ * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
+ */
+enum iwl_ltr_config_flags {
+ LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0),
+ LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1),
+ LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2),
+ LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3),
+ LTR_CFG_FLAG_SW_SET_SHORT = BIT(4),
+ LTR_CFG_FLAG_SW_SET_LONG = BIT(5),
+ LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6),
+};
+
+/**
+ * struct iwl_ltr_config_cmd - configures the LTR
+ * @flags: See %enum iwl_ltr_config_flags
+ */
+struct iwl_ltr_config_cmd {
+ __le32 flags;
+ __le32 static_long;
+ __le32 static_short;
+} __packed;
+
/* Radio LP RX Energy Threshold measured in dBm */
#define POWER_LPRX_RSSI_THRESHOLD 75
#define POWER_LPRX_RSSI_THRESHOLD_MAX 94
#define POWER_LPRX_RSSI_THRESHOLD_MIN 30
/**
- * enum iwl_scan_flags - masks for power table command flags
+ * enum iwl_power_flags - masks for power table command flags
* @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
* receiver and transmitter. '0' - does not allow.
* @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
/* Power - legacy power table command */
POWER_TABLE_CMD = 0x77,
PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
+ LTR_CONFIG = 0xee,
/* Thermal Throttling*/
REPLY_THERMAL_MNG_BACKOFF = 0x7e,
/* Initialize tx backoffs to the minimal possible */
iwl_mvm_tt_tx_backoff(mvm, 0);
+ if (mvm->trans->ltr_enabled) {
+ struct iwl_ltr_config_cmd cmd = {
+ .flags = cpu_to_le32(LTR_CFG_FLAG_FEATURE_ENABLE),
+ };
+
+ WARN_ON(iwl_mvm_send_cmd_pdu(mvm, LTR_CONFIG, 0,
+ sizeof(cmd), &cmd));
+ }
+
ret = iwl_mvm_power_update_device(mvm);
if (ret)
goto error;
}
if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_MVM_OFFCHANNEL_QUEUE &&
- !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status))
+ !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status) &&
+ !test_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status))
goto drop;
/* treat non-bufferable MMPDUs as broadcast if sta is sleeping */
if (changes & BSS_CHANGED_BEACON &&
iwl_mvm_mac_ctxt_beacon_changed(mvm, vif))
IWL_WARN(mvm, "Failed updating beacon data\n");
+
+ if (changes & BSS_CHANGED_TXPOWER) {
+ IWL_DEBUG_CALIB(mvm, "Changing TX Power to %d\n",
+ bss_conf->txpower);
+ iwl_mvm_set_tx_power(mvm, vif, bss_conf->txpower);
+ }
+
}
static void iwl_mvm_bss_info_changed(struct ieee80211_hw *hw,
/* Set the node address */
memcpy(aux_roc_req.node_addr, vif->addr, ETH_ALEN);
+ lockdep_assert_held(&mvm->mutex);
+
+ spin_lock_bh(&mvm->time_event_lock);
+
+ if (WARN_ON(te_data->id == HOT_SPOT_CMD)) {
+ spin_unlock_bh(&mvm->time_event_lock);
+ return -EIO;
+ }
+
te_data->vif = vif;
te_data->duration = duration;
te_data->id = HOT_SPOT_CMD;
- lockdep_assert_held(&mvm->mutex);
-
- spin_lock_bh(&mvm->time_event_lock);
- list_add_tail(&te_data->list, &mvm->time_event_list);
spin_unlock_bh(&mvm->time_event_lock);
/*
IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value,
duration, type);
+ mutex_lock(&mvm->mutex);
+
switch (vif->type) {
case NL80211_IFTYPE_STATION:
/* Use aux roc framework (HS20) */
ret = iwl_mvm_send_aux_roc_cmd(mvm, channel,
vif, duration);
- return ret;
+ goto out_unlock;
case NL80211_IFTYPE_P2P_DEVICE:
/* handle below */
break;
default:
IWL_ERR(mvm, "vif isn't P2P_DEVICE: %d\n", vif->type);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_unlock;
}
- mutex_lock(&mvm->mutex);
-
for (i = 0; i < NUM_PHY_CTX; i++) {
phy_ctxt = &mvm->phy_ctxts[i];
if (phy_ctxt->ref == 0 || mvmvif->phy_ctxt == phy_ctxt)
CMD(DTS_MEASUREMENT_NOTIFICATION),
CMD(REPLY_THERMAL_MNG_BACKOFF),
CMD(MAC_PM_POWER_TABLE),
+ CMD(LTR_CONFIG),
CMD(BT_COEX_CI),
CMD(BT_COEX_UPDATE_SW_BOOST),
CMD(BT_COEX_UPDATE_CORUN_LUT),
basic_ssid ? 1 : 0);
cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL |
- TX_CMD_FLG_BT_DIS);
+ 3 << TX_CMD_FLG_BT_PRIO_POS);
+
cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id;
cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
cmd->tx_cmd.rate_n_flags =
te_data->running = false;
te_data->vif = NULL;
te_data->uid = 0;
+ te_data->id = TE_MAX;
} else if (le32_to_cpu(notif->action) == TE_V2_NOTIF_HOST_EVENT_START) {
- set_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status);
set_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status);
te_data->running = true;
ieee80211_ready_on_channel(mvm->hw); /* Start TE */
/*
* for data packets, rate info comes from the table inside the fw. This
- * table is controlled by LINK_QUALITY commands. Exclude ctrl port
- * frames like EAPOLs which should be treated as mgmt frames. This
- * avoids them being sent initially in high rates which increases the
- * chances for completion of the 4-Way handshake.
+ * table is controlled by LINK_QUALITY commands
*/
- if (ieee80211_is_data(fc) && sta &&
- !(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) {
+ if (ieee80211_is_data(fc) && sta) {
tx_cmd->initial_rate_index = 0;
tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE);
return;
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
u16 lctl;
+ u16 cap;
/*
* HW bug W/A for instability in PCIe bus L0S->L1 transition.
* power savings, even without L1.
*/
pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_LNKCTL, &lctl);
- if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
- /* L1-ASPM enabled; disable(!) L0S */
+ if (lctl & PCI_EXP_LNKCTL_ASPM_L1)
iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_info(trans->dev, "L1 Enabled; Disabling L0S\n");
- } else {
- /* L1-ASPM disabled; enable(!) L0S */
+ else
iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_info(trans->dev, "L1 Disabled; Enabling L0S\n");
- }
trans->pm_support = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S);
+
+ pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_DEVCTL2, &cap);
+ trans->ltr_enabled = cap & PCI_EXP_DEVCTL2_LTR_EN;
+ dev_info(trans->dev, "L1 %sabled - LTR %sabled\n",
+ (lctl & PCI_EXP_LNKCTL_ASPM_L1) ? "En" : "Dis",
+ trans->ltr_enabled ? "En" : "Dis");
}
/*
ret = iwl_poll_bit(trans, CSR_RESET,
CSR_RESET_REG_FLAG_MASTER_DISABLED,
CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
- if (ret)
+ if (ret < 0)
IWL_WARN(trans, "Master Disable Timed Out, 100 usec\n");
IWL_DEBUG_INFO(trans, "stop master\n");
msleep(25);
}
- IWL_DEBUG_INFO(trans, "got NIC after %d iterations\n", iter);
+ IWL_ERR(trans, "Couldn't prepare the card\n");
return ret;
}
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
25000);
- if (ret) {
+ if (ret < 0) {
IWL_ERR(trans, "Failed to resume the device (mac ready)\n");
return ret;
}
mwifiex_11n_dispatch_pkt_until_start_win(priv, tbl, start_win);
del_timer_sync(&tbl->timer_context.timer);
+ tbl->timer_context.timer_is_set = false;
spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
list_del(&tbl->list);
(struct reorder_tmr_cnxt *) context;
int start_win, seq_num;
+ ctx->timer_is_set = false;
seq_num = mwifiex_11n_find_last_seq_num(ctx);
if (seq_num < 0)
new_node->timer_context.ptr = new_node;
new_node->timer_context.priv = priv;
+ new_node->timer_context.timer_is_set = false;
init_timer(&new_node->timer_context.timer);
new_node->timer_context.timer.function = mwifiex_flush_data;
spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
}
+static void
+mwifiex_11n_rxreorder_timer_restart(struct mwifiex_rx_reorder_tbl *tbl)
+{
+ u32 min_flush_time;
+
+ if (tbl->win_size >= MWIFIEX_BA_WIN_SIZE_32)
+ min_flush_time = MIN_FLUSH_TIMER_15_MS;
+ else
+ min_flush_time = MIN_FLUSH_TIMER_MS;
+
+ mod_timer(&tbl->timer_context.timer,
+ jiffies + msecs_to_jiffies(min_flush_time * tbl->win_size));
+
+ tbl->timer_context.timer_is_set = true;
+}
+
/*
* This function prepares command for adding a BA request.
*
u8 *ta, u8 pkt_type, void *payload)
{
struct mwifiex_rx_reorder_tbl *tbl;
- int start_win, end_win, win_size;
+ int prev_start_win, start_win, end_win, win_size;
u16 pkt_index;
bool init_window_shift = false;
+ int ret = 0;
tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
if (!tbl) {
if (pkt_type != PKT_TYPE_BAR)
mwifiex_11n_dispatch_pkt(priv, payload);
- return 0;
+ return ret;
}
if ((pkt_type == PKT_TYPE_AMSDU) && !tbl->amsdu) {
mwifiex_11n_dispatch_pkt(priv, payload);
- return 0;
+ return ret;
}
start_win = tbl->start_win;
+ prev_start_win = start_win;
win_size = tbl->win_size;
end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1);
if (tbl->flags & RXREOR_INIT_WINDOW_SHIFT) {
init_window_shift = true;
tbl->flags &= ~RXREOR_INIT_WINDOW_SHIFT;
}
- mod_timer(&tbl->timer_context.timer,
- jiffies + msecs_to_jiffies(MIN_FLUSH_TIMER_MS * win_size));
if (tbl->flags & RXREOR_FORCE_NO_DROP) {
dev_dbg(priv->adapter->dev,
if ((start_win + TWOPOW11) > (MAX_TID_VALUE - 1)) {
if (seq_num >= ((start_win + TWOPOW11) &
(MAX_TID_VALUE - 1)) &&
- seq_num < start_win)
- return -1;
+ seq_num < start_win) {
+ ret = -1;
+ goto done;
+ }
} else if ((seq_num < start_win) ||
- (seq_num > (start_win + TWOPOW11))) {
- return -1;
+ (seq_num >= (start_win + TWOPOW11))) {
+ ret = -1;
+ goto done;
}
}
else
pkt_index = (seq_num+MAX_TID_VALUE) - start_win;
- if (tbl->rx_reorder_ptr[pkt_index])
- return -1;
+ if (tbl->rx_reorder_ptr[pkt_index]) {
+ ret = -1;
+ goto done;
+ }
tbl->rx_reorder_ptr[pkt_index] = payload;
}
*/
mwifiex_11n_scan_and_dispatch(priv, tbl);
- return 0;
+done:
+ if (!tbl->timer_context.timer_is_set ||
+ prev_start_win != tbl->start_win)
+ mwifiex_11n_rxreorder_timer_restart(tbl);
+ return ret;
}
/*
#define _MWIFIEX_11N_RXREORDER_H_
#define MIN_FLUSH_TIMER_MS 50
+#define MIN_FLUSH_TIMER_15_MS 15
+#define MWIFIEX_BA_WIN_SIZE_32 32
#define PKT_TYPE_BAR 0xE7
#define MAX_TID_VALUE (2 << 11)
struct timer_list timer;
struct mwifiex_rx_reorder_tbl *ptr;
struct mwifiex_private *priv;
+ u8 timer_is_set;
};
struct mwifiex_rx_reorder_tbl {
/* Ovislink */
{ USB_DEVICE(0x1b75, 0x3071) },
{ USB_DEVICE(0x1b75, 0x3072) },
+ { USB_DEVICE(0x1b75, 0xa200) },
/* Para */
{ USB_DEVICE(0x20b8, 0x8888) },
/* Pegatron */
rtl_easy_concurrent_retrytimer_callback, (unsigned long)hw);
/* <2> work queue */
rtlpriv->works.hw = hw;
- rtlpriv->works.rtl_wq = alloc_workqueue(rtlpriv->cfg->name, 0, 0);
+ rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
(void *)rtl_watchdog_wq_callback);
INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
.flush = rtl_op_flush,
};
EXPORT_SYMBOL_GPL(rtl_ops);
+
+bool rtl_btc_status_false(void)
+{
+ return false;
+}
+EXPORT_SYMBOL_GPL(rtl_btc_status_false);
u32 mask, u32 data);
void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data);
bool rtl_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb);
+bool rtl_btc_status_false(void);
#endif
rtl_pci_reset_trx_ring(hw);
rtlpci->driver_is_goingto_unload = false;
- if (rtlpriv->cfg->ops->get_btc_status()) {
+ if (rtlpriv->cfg->ops->get_btc_status &&
+ rtlpriv->cfg->ops->get_btc_status()) {
rtlpriv->btcoexist.btc_ops->btc_init_variables(rtlpriv);
rtlpriv->btcoexist.btc_ops->btc_init_hal_vars(rtlpriv);
}
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw,
+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *))
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
memcpy((u8 *)skb_put(skb, totalpacketlen),
&reserved_page_packet, totalpacketlen);
- rtstatus = rtl_cmd_send_packet(hw, skb);
+ if (cmd_send_packet)
+ rtstatus = cmd_send_packet(hw, skb);
+ else
+ rtstatus = rtl_cmd_send_packet(hw, skb);
if (rtstatus)
b_dlok = true;
u32 cmd_len, u8 *p_cmdbuffer);
void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
+void rtl92c_set_fw_rsvdpagepkt
+ (struct ieee80211_hw *hw,
+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *));
void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
void usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, void *data, u16 len);
void rtl92c_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 16, 4)
#define GET_C2H_CMD_FEEDBACK_CCX_SEQ(__pcmdfbhdr) \
LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 20, 12)
+#define GET_RX_STATUS_DESC_BUFF_ADDR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 24, 0, 32)
#define CHIP_VER_B BIT(4)
#define CHIP_BONDING_IDENTIFIER(_value) (((_value) >> 22) & 0x3)
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
tmp_reg422 & (~BIT(6)));
- rtl92c_set_fw_rsvdpagepkt(hw, 0);
+ rtl92c_set_fw_rsvdpagepkt(hw, NULL);
_rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
.phy_lc_calibrate = _rtl92ce_phy_lc_calibrate,
.phy_set_bw_mode_callback = rtl92ce_phy_set_bw_mode_callback,
.dm_dynamic_txpower = rtl92ce_dm_dynamic_txpower,
+ .get_btc_status = rtl_btc_status_false,
};
static struct rtl_mod_params rtl92ce_mod_params = {
case HW_DESC_RXPKT_LEN:
ret = GET_RX_DESC_PKT_LEN(pdesc);
break;
+ case HW_DESC_RXBUFF_ADDR:
+ ret = GET_RX_STATUS_DESC_BUFF_ADDR(pdesc);
+ break;
default:
RT_ASSERT(false, "ERR rxdesc :%d not process\n",
desc_name);
}
}
+bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ /* Currently nothing happens here.
+ * Traffic stops after some seconds in WPA2 802.11n mode.
+ * Maybe because rtl8192cu chip should be set from here?
+ * If I understand correctly, the realtek vendor driver sends some urbs
+ * if its "here".
+ *
+ * This is maybe necessary:
+ * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
+ */
+ return true;
+}
+
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
recover = true;
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
tmp_reg422 & (~BIT(6)));
- rtl92c_set_fw_rsvdpagepkt(hw, 0);
+ rtl92c_set_fw_rsvdpagepkt(hw,
+ &usb_cmd_send_packet);
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
if (recover)
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
int rtl92c_download_fw(struct ieee80211_hw *hw);
void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw,
u8 element_id, u32 cmd_len, u8 *p_cmdbuffer);
}
}
+/* get bt coexist status */
+static bool rtl92cu_get_btc_status(void)
+{
+ return false;
+}
+
static struct rtl_hal_ops rtl8192cu_hal_ops = {
.init_sw_vars = rtl92cu_init_sw_vars,
.deinit_sw_vars = rtl92cu_deinit_sw_vars,
.phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback,
.dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower,
.fill_h2c_cmd = rtl92c_fill_h2c_cmd,
+ .get_btc_status = rtl92cu_get_btc_status,
};
static struct rtl_mod_params rtl92cu_mod_params = {
.get_rfreg = rtl92d_phy_query_rf_reg,
.set_rfreg = rtl92d_phy_set_rf_reg,
.linked_set_reg = rtl92d_linked_set_reg,
+ .get_btc_status = rtl_btc_status_false,
};
static struct rtl_mod_params rtl92de_mod_params = {
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process %x\n", variable);
break;
}
acm_ctrl &= (~ACMHW_BEQEN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process\n");
break;
}
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process %x\n", variable);
break;
}
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process\n");
enc_algo = CAM_TKIP;
break;
/* DWORD 6 */
#define SET_RX_STATUS__DESC_BUFF_ADDR(__pdesc, __val) \
SET_BITS_OFFSET_LE(__pdesc + 24, 0, 32, __val)
+#define GET_RX_STATUS_DESC_BUFF_ADDR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 24, 0, 32)
#define SE_RX_HAL_IS_CCK_RATE(_pdesc)\
(GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92_RATE1M || \
static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
{
struct ieee80211_hw *hw = context;
- struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
struct rt_firmware *pfirmware = NULL;
- int err;
RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
"Firmware callback routine entered!\n");
memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size);
pfirmware->sz_fw_tmpbufferlen = firmware->size;
release_firmware(firmware);
-
- err = ieee80211_register_hw(hw);
- if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't register mac80211 hw\n");
- return;
- } else {
- rtlpriv->mac80211.mac80211_registered = 1;
- }
- rtlpci->irq_alloc = 1;
- set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
-
- /*init rfkill */
- rtl_init_rfkill(hw);
}
static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
if (!rtlpriv->rtlhal.pfirmware)
return 1;
- rtlpriv->max_fw_size = RTL8190_MAX_RAW_FIRMWARE_CODE_SIZE;
-
+ rtlpriv->max_fw_size = RTL8190_MAX_FIRMWARE_CODE_SIZE*2 +
+ sizeof(struct fw_hdr);
pr_info("Driver for Realtek RTL8192SE/RTL8191SE\n"
"Loading firmware %s\n", rtlpriv->cfg->fw_name);
/* request fw */
.set_bbreg = rtl92s_phy_set_bb_reg,
.get_rfreg = rtl92s_phy_query_rf_reg,
.set_rfreg = rtl92s_phy_set_rf_reg,
+ .get_btc_status = rtl_btc_status_false,
};
static struct rtl_mod_params rtl92se_mod_params = {
case HW_DESC_RXPKT_LEN:
ret = GET_RX_STATUS_DESC_PKT_LEN(desc);
break;
+ case HW_DESC_RXBUFF_ADDR:
+ ret = GET_RX_STATUS_DESC_BUFF_ADDR(desc);
+ break;
default:
RT_ASSERT(false, "ERR rxdesc :%d not process\n",
desc_name);
struct rtl_phy *rtlphy = &rtlpriv->phy;
u8 rate_section = _rtl8821ae_get_rate_section_index(regaddr);
- if (band != BAND_ON_2_4G && band != BAND_ON_5G)
+ if (band != BAND_ON_2_4G && band != BAND_ON_5G) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_WARNING, "Invalid Band %d\n", band);
-
- if (rfpath >= MAX_RF_PATH)
+ band = BAND_ON_2_4G;
+ }
+ if (rfpath >= MAX_RF_PATH) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_WARNING, "Invalid RfPath %d\n", rfpath);
-
- if (txnum >= MAX_RF_PATH)
+ rfpath = MAX_RF_PATH - 1;
+ }
+ if (txnum >= MAX_RF_PATH) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_WARNING, "Invalid TxNum %d\n", txnum);
-
+ txnum = MAX_RF_PATH - 1;
+ }
rtlphy->tx_power_by_rate_offset[band][rfpath][txnum][rate_section] = data;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"TxPwrByRateOffset[Band %d][RfPath %d][TxNum %d][RateSection %d] = 0x%x\n",
}
rtlpriv->cfg->ops->init_sw_leds(hw);
+ err = ieee80211_register_hw(hw);
+ if (err) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Can't register mac80211 hw.\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+ rtlpriv->mac80211.mac80211_registered = 1;
+
+ set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
return 0;
+
error_out:
rtl_deinit_core(hw);
_rtl_usb_io_handler_release(hw);
char rx_irq_name[IRQ_NAME_SIZE]; /* DEVNAME-qN-rx */
struct xen_netif_rx_back_ring rx;
struct sk_buff_head rx_queue;
- RING_IDX rx_last_skb_slots;
- unsigned long status;
- struct timer_list rx_stalled;
+ unsigned int rx_queue_max;
+ unsigned int rx_queue_len;
+ unsigned long last_rx_time;
+ bool stalled;
struct gnttab_copy grant_copy_op[MAX_GRANT_COPY_OPS];
struct xenvif_stats stats;
};
+/* Maximum number of Rx slots a to-guest packet may use, including the
+ * slot needed for GSO meta-data.
+ */
+#define XEN_NETBK_RX_SLOTS_MAX (MAX_SKB_FRAGS + 1)
+
enum state_bit_shift {
/* This bit marks that the vif is connected */
VIF_STATUS_CONNECTED,
- /* This bit signals the RX thread that queuing was stopped (in
- * start_xmit), and either the timer fired or an RX interrupt came
- */
- QUEUE_STATUS_RX_PURGE_EVENT,
- /* This bit tells the interrupt handler that this queue was the reason
- * for the carrier off, so it should kick the thread. Only queues which
- * brought it down can turn on the carrier.
- */
- QUEUE_STATUS_RX_STALLED
};
struct xenvif {
u8 ip_csum:1;
u8 ipv6_csum:1;
- /* Internal feature information. */
- u8 can_queue:1; /* can queue packets for receiver? */
-
/* Is this interface disabled? True when backend discovers
* frontend is rogue.
*/
/* Queues */
struct xenvif_queue *queues;
unsigned int num_queues; /* active queues, resource allocated */
+ unsigned int stalled_queues;
+
+ spinlock_t lock;
#ifdef CONFIG_DEBUG_FS
struct dentry *xenvif_dbg_root;
struct net_device *dev;
};
+struct xenvif_rx_cb {
+ unsigned long expires;
+ int meta_slots_used;
+ bool full_coalesce;
+};
+
+#define XENVIF_RX_CB(skb) ((struct xenvif_rx_cb *)(skb)->cb)
+
static inline struct xenbus_device *xenvif_to_xenbus_device(struct xenvif *vif)
{
return to_xenbus_device(vif->dev->dev.parent);
int xenvif_schedulable(struct xenvif *vif);
-int xenvif_must_stop_queue(struct xenvif_queue *queue);
-
int xenvif_queue_stopped(struct xenvif_queue *queue);
void xenvif_wake_queue(struct xenvif_queue *queue);
int xenvif_dealloc_kthread(void *data);
+void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb);
+
/* Determine whether the needed number of slots (req) are available,
* and set req_event if not.
*/
#define XENVIF_QUEUE_LENGTH 32
#define XENVIF_NAPI_WEIGHT 64
+/* Number of bytes allowed on the internal guest Rx queue. */
+#define XENVIF_RX_QUEUE_BYTES (XEN_NETIF_RX_RING_SIZE/2 * PAGE_SIZE)
+
/* This function is used to set SKBTX_DEV_ZEROCOPY as well as
* increasing the inflight counter. We need to increase the inflight
* counter because core driver calls into xenvif_zerocopy_callback
atomic_dec(&queue->inflight_packets);
}
-static inline void xenvif_stop_queue(struct xenvif_queue *queue)
-{
- struct net_device *dev = queue->vif->dev;
-
- if (!queue->vif->can_queue)
- return;
-
- netif_tx_stop_queue(netdev_get_tx_queue(dev, queue->id));
-}
-
int xenvif_schedulable(struct xenvif *vif)
{
return netif_running(vif->dev) &&
- test_bit(VIF_STATUS_CONNECTED, &vif->status);
+ test_bit(VIF_STATUS_CONNECTED, &vif->status) &&
+ !vif->disabled;
}
static irqreturn_t xenvif_tx_interrupt(int irq, void *dev_id)
static irqreturn_t xenvif_rx_interrupt(int irq, void *dev_id)
{
struct xenvif_queue *queue = dev_id;
- struct netdev_queue *net_queue =
- netdev_get_tx_queue(queue->vif->dev, queue->id);
- /* QUEUE_STATUS_RX_PURGE_EVENT is only set if either QDisc was off OR
- * the carrier went down and this queue was previously blocked
- */
- if (unlikely(netif_tx_queue_stopped(net_queue) ||
- (!netif_carrier_ok(queue->vif->dev) &&
- test_bit(QUEUE_STATUS_RX_STALLED, &queue->status))))
- set_bit(QUEUE_STATUS_RX_PURGE_EVENT, &queue->status);
xenvif_kick_thread(queue);
return IRQ_HANDLED;
netif_tx_wake_queue(netdev_get_tx_queue(dev, id));
}
-/* Callback to wake the queue's thread and turn the carrier off on timeout */
-static void xenvif_rx_stalled(unsigned long data)
-{
- struct xenvif_queue *queue = (struct xenvif_queue *)data;
-
- if (xenvif_queue_stopped(queue)) {
- set_bit(QUEUE_STATUS_RX_PURGE_EVENT, &queue->status);
- xenvif_kick_thread(queue);
- }
-}
-
static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xenvif *vif = netdev_priv(dev);
struct xenvif_queue *queue = NULL;
unsigned int num_queues = vif->num_queues;
u16 index;
- int min_slots_needed;
+ struct xenvif_rx_cb *cb;
BUG_ON(skb->dev != dev);
!xenvif_schedulable(vif))
goto drop;
- /* At best we'll need one slot for the header and one for each
- * frag.
- */
- min_slots_needed = 1 + skb_shinfo(skb)->nr_frags;
-
- /* If the skb is GSO then we'll also need an extra slot for the
- * metadata.
- */
- if (skb_is_gso(skb))
- min_slots_needed++;
+ cb = XENVIF_RX_CB(skb);
+ cb->expires = jiffies + rx_drain_timeout_jiffies;
- /* If the skb can't possibly fit in the remaining slots
- * then turn off the queue to give the ring a chance to
- * drain.
- */
- if (!xenvif_rx_ring_slots_available(queue, min_slots_needed)) {
- queue->rx_stalled.function = xenvif_rx_stalled;
- queue->rx_stalled.data = (unsigned long)queue;
- xenvif_stop_queue(queue);
- mod_timer(&queue->rx_stalled,
- jiffies + rx_drain_timeout_jiffies);
- }
-
- skb_queue_tail(&queue->rx_queue, skb);
+ xenvif_rx_queue_tail(queue, skb);
xenvif_kick_thread(queue);
return NETDEV_TX_OK;
vif->queues = NULL;
vif->num_queues = 0;
+ spin_lock_init(&vif->lock);
+
dev->netdev_ops = &xenvif_netdev_ops;
dev->hw_features = NETIF_F_SG |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
init_timer(&queue->credit_timeout);
queue->credit_window_start = get_jiffies_64();
+ queue->rx_queue_max = XENVIF_RX_QUEUE_BYTES;
+
skb_queue_head_init(&queue->rx_queue);
skb_queue_head_init(&queue->tx_queue);
queue->grant_tx_handle[i] = NETBACK_INVALID_HANDLE;
}
- init_timer(&queue->rx_stalled);
-
return 0;
}
dev_set_mtu(vif->dev, ETH_DATA_LEN);
netdev_update_features(vif->dev);
set_bit(VIF_STATUS_CONNECTED, &vif->status);
- netif_carrier_on(vif->dev);
if (netif_running(vif->dev))
xenvif_up(vif);
rtnl_unlock();
disable_irq(queue->rx_irq);
}
+ queue->stalled = true;
+
task = kthread_create(xenvif_kthread_guest_rx,
(void *)queue, "%s-guest-rx", queue->name);
if (IS_ERR(task)) {
netif_napi_del(&queue->napi);
if (queue->task) {
- del_timer_sync(&queue->rx_stalled);
kthread_stop(queue->task);
queue->task = NULL;
}
bool separate_tx_rx_irq = 1;
module_param(separate_tx_rx_irq, bool, 0644);
-/* When guest ring is filled up, qdisc queues the packets for us, but we have
- * to timeout them, otherwise other guests' packets can get stuck there
+/* The time that packets can stay on the guest Rx internal queue
+ * before they are dropped.
*/
unsigned int rx_drain_timeout_msecs = 10000;
module_param(rx_drain_timeout_msecs, uint, 0444);
unsigned int rx_drain_timeout_jiffies;
+/* The length of time before the frontend is considered unresponsive
+ * because it isn't providing Rx slots.
+ */
+static unsigned int rx_stall_timeout_msecs = 60000;
+module_param(rx_stall_timeout_msecs, uint, 0444);
+static unsigned int rx_stall_timeout_jiffies;
+
unsigned int xenvif_max_queues;
module_param_named(max_queues, xenvif_max_queues, uint, 0644);
MODULE_PARM_DESC(max_queues,
s8 st);
static inline int tx_work_todo(struct xenvif_queue *queue);
-static inline int rx_work_todo(struct xenvif_queue *queue);
static struct xen_netif_rx_response *make_rx_response(struct xenvif_queue *queue,
u16 id,
return false;
}
+void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&queue->rx_queue.lock, flags);
+
+ __skb_queue_tail(&queue->rx_queue, skb);
+
+ queue->rx_queue_len += skb->len;
+ if (queue->rx_queue_len > queue->rx_queue_max)
+ netif_tx_stop_queue(netdev_get_tx_queue(queue->vif->dev, queue->id));
+
+ spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
+}
+
+static struct sk_buff *xenvif_rx_dequeue(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+
+ spin_lock_irq(&queue->rx_queue.lock);
+
+ skb = __skb_dequeue(&queue->rx_queue);
+ if (skb)
+ queue->rx_queue_len -= skb->len;
+
+ spin_unlock_irq(&queue->rx_queue.lock);
+
+ return skb;
+}
+
+static void xenvif_rx_queue_maybe_wake(struct xenvif_queue *queue)
+{
+ spin_lock_irq(&queue->rx_queue.lock);
+
+ if (queue->rx_queue_len < queue->rx_queue_max)
+ netif_tx_wake_queue(netdev_get_tx_queue(queue->vif->dev, queue->id));
+
+ spin_unlock_irq(&queue->rx_queue.lock);
+}
+
+
+static void xenvif_rx_queue_purge(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+ while ((skb = xenvif_rx_dequeue(queue)) != NULL)
+ kfree_skb(skb);
+}
+
+static void xenvif_rx_queue_drop_expired(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+
+ for(;;) {
+ skb = skb_peek(&queue->rx_queue);
+ if (!skb)
+ break;
+ if (time_before(jiffies, XENVIF_RX_CB(skb)->expires))
+ break;
+ xenvif_rx_dequeue(queue);
+ kfree_skb(skb);
+ }
+}
+
/*
* Returns true if we should start a new receive buffer instead of
* adding 'size' bytes to a buffer which currently contains 'offset'
return meta;
}
-struct xenvif_rx_cb {
- int meta_slots_used;
- bool full_coalesce;
-};
-
-#define XENVIF_RX_CB(skb) ((struct xenvif_rx_cb *)(skb)->cb)
-
/*
* Set up the grant operations for this fragment. If it's a flipping
* interface, we also set up the unmap request from here.
skb_queue_head_init(&rxq);
- while ((skb = skb_dequeue(&queue->rx_queue)) != NULL) {
+ while (xenvif_rx_ring_slots_available(queue, XEN_NETBK_RX_SLOTS_MAX)
+ && (skb = xenvif_rx_dequeue(queue)) != NULL) {
RING_IDX max_slots_needed;
RING_IDX old_req_cons;
RING_IDX ring_slots_used;
int i;
+ queue->last_rx_time = jiffies;
+
/* We need a cheap worse case estimate for the number of
* slots we'll use.
*/
skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6))
max_slots_needed++;
- /* If the skb may not fit then bail out now */
- if (!xenvif_rx_ring_slots_available(queue, max_slots_needed)) {
- skb_queue_head(&queue->rx_queue, skb);
- need_to_notify = true;
- queue->rx_last_skb_slots = max_slots_needed;
- break;
- } else
- queue->rx_last_skb_slots = 0;
-
old_req_cons = queue->rx.req_cons;
XENVIF_RX_CB(skb)->meta_slots_used = xenvif_gop_skb(skb, &npo, queue);
ring_slots_used = queue->rx.req_cons - old_req_cons;
}
}
-static inline int rx_work_todo(struct xenvif_queue *queue)
-{
- return (!skb_queue_empty(&queue->rx_queue) &&
- xenvif_rx_ring_slots_available(queue, queue->rx_last_skb_slots));
-}
-
static inline int tx_work_todo(struct xenvif_queue *queue)
{
if (likely(RING_HAS_UNCONSUMED_REQUESTS(&queue->tx)))
return err;
}
-static void xenvif_start_queue(struct xenvif_queue *queue)
+static void xenvif_queue_carrier_off(struct xenvif_queue *queue)
{
- if (xenvif_schedulable(queue->vif))
- xenvif_wake_queue(queue);
+ struct xenvif *vif = queue->vif;
+
+ queue->stalled = true;
+
+ /* At least one queue has stalled? Disable the carrier. */
+ spin_lock(&vif->lock);
+ if (vif->stalled_queues++ == 0) {
+ netdev_info(vif->dev, "Guest Rx stalled");
+ netif_carrier_off(vif->dev);
+ }
+ spin_unlock(&vif->lock);
}
-/* Only called from the queue's thread, it handles the situation when the guest
- * doesn't post enough requests on the receiving ring.
- * First xenvif_start_xmit disables QDisc and start a timer, and then either the
- * timer fires, or the guest send an interrupt after posting new request. If it
- * is the timer, the carrier is turned off here.
- * */
-static void xenvif_rx_purge_event(struct xenvif_queue *queue)
+static void xenvif_queue_carrier_on(struct xenvif_queue *queue)
{
- /* Either the last unsuccesful skb or at least 1 slot should fit */
- int needed = queue->rx_last_skb_slots ?
- queue->rx_last_skb_slots : 1;
+ struct xenvif *vif = queue->vif;
- /* It is assumed that if the guest post new slots after this, the RX
- * interrupt will set the QUEUE_STATUS_RX_PURGE_EVENT bit and wake up
- * the thread again
- */
- set_bit(QUEUE_STATUS_RX_STALLED, &queue->status);
- if (!xenvif_rx_ring_slots_available(queue, needed)) {
- rtnl_lock();
- if (netif_carrier_ok(queue->vif->dev)) {
- /* Timer fired and there are still no slots. Turn off
- * everything except the interrupts
- */
- netif_carrier_off(queue->vif->dev);
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
- if (net_ratelimit())
- netdev_err(queue->vif->dev, "Carrier off due to lack of guest response on queue %d\n", queue->id);
- } else {
- /* Probably an another queue already turned the carrier
- * off, make sure nothing is stucked in the internal
- * queue of this queue
- */
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
- }
- rtnl_unlock();
- } else if (!netif_carrier_ok(queue->vif->dev)) {
- unsigned int num_queues = queue->vif->num_queues;
- unsigned int i;
- /* The carrier was down, but an interrupt kicked
- * the thread again after new requests were
- * posted
- */
- clear_bit(QUEUE_STATUS_RX_STALLED,
- &queue->status);
- rtnl_lock();
- netif_carrier_on(queue->vif->dev);
- netif_tx_wake_all_queues(queue->vif->dev);
- rtnl_unlock();
+ queue->last_rx_time = jiffies; /* Reset Rx stall detection. */
+ queue->stalled = false;
- for (i = 0; i < num_queues; i++) {
- struct xenvif_queue *temp = &queue->vif->queues[i];
+ /* All queues are ready? Enable the carrier. */
+ spin_lock(&vif->lock);
+ if (--vif->stalled_queues == 0) {
+ netdev_info(vif->dev, "Guest Rx ready");
+ netif_carrier_on(vif->dev);
+ }
+ spin_unlock(&vif->lock);
+}
- xenvif_napi_schedule_or_enable_events(temp);
- }
- if (net_ratelimit())
- netdev_err(queue->vif->dev, "Carrier on again\n");
- } else {
- /* Queuing were stopped, but the guest posted
- * new requests and sent an interrupt
- */
- clear_bit(QUEUE_STATUS_RX_STALLED,
- &queue->status);
- del_timer_sync(&queue->rx_stalled);
- xenvif_start_queue(queue);
+static bool xenvif_rx_queue_stalled(struct xenvif_queue *queue)
+{
+ RING_IDX prod, cons;
+
+ prod = queue->rx.sring->req_prod;
+ cons = queue->rx.req_cons;
+
+ return !queue->stalled
+ && prod - cons < XEN_NETBK_RX_SLOTS_MAX
+ && time_after(jiffies,
+ queue->last_rx_time + rx_stall_timeout_jiffies);
+}
+
+static bool xenvif_rx_queue_ready(struct xenvif_queue *queue)
+{
+ RING_IDX prod, cons;
+
+ prod = queue->rx.sring->req_prod;
+ cons = queue->rx.req_cons;
+
+ return queue->stalled
+ && prod - cons >= XEN_NETBK_RX_SLOTS_MAX;
+}
+
+static bool xenvif_have_rx_work(struct xenvif_queue *queue)
+{
+ return (!skb_queue_empty(&queue->rx_queue)
+ && xenvif_rx_ring_slots_available(queue, XEN_NETBK_RX_SLOTS_MAX))
+ || xenvif_rx_queue_stalled(queue)
+ || xenvif_rx_queue_ready(queue)
+ || kthread_should_stop()
+ || queue->vif->disabled;
+}
+
+static long xenvif_rx_queue_timeout(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+ long timeout;
+
+ skb = skb_peek(&queue->rx_queue);
+ if (!skb)
+ return MAX_SCHEDULE_TIMEOUT;
+
+ timeout = XENVIF_RX_CB(skb)->expires - jiffies;
+ return timeout < 0 ? 0 : timeout;
+}
+
+/* Wait until the guest Rx thread has work.
+ *
+ * The timeout needs to be adjusted based on the current head of the
+ * queue (and not just the head at the beginning). In particular, if
+ * the queue is initially empty an infinite timeout is used and this
+ * needs to be reduced when a skb is queued.
+ *
+ * This cannot be done with wait_event_timeout() because it only
+ * calculates the timeout once.
+ */
+static void xenvif_wait_for_rx_work(struct xenvif_queue *queue)
+{
+ DEFINE_WAIT(wait);
+
+ if (xenvif_have_rx_work(queue))
+ return;
+
+ for (;;) {
+ long ret;
+
+ prepare_to_wait(&queue->wq, &wait, TASK_INTERRUPTIBLE);
+ if (xenvif_have_rx_work(queue))
+ break;
+ ret = schedule_timeout(xenvif_rx_queue_timeout(queue));
+ if (!ret)
+ break;
}
+ finish_wait(&queue->wq, &wait);
}
int xenvif_kthread_guest_rx(void *data)
{
struct xenvif_queue *queue = data;
- struct sk_buff *skb;
+ struct xenvif *vif = queue->vif;
- while (!kthread_should_stop()) {
- wait_event_interruptible(queue->wq,
- rx_work_todo(queue) ||
- queue->vif->disabled ||
- test_bit(QUEUE_STATUS_RX_PURGE_EVENT, &queue->status) ||
- kthread_should_stop());
+ for (;;) {
+ xenvif_wait_for_rx_work(queue);
if (kthread_should_stop())
break;
* context so we defer it here, if this thread is
* associated with queue 0.
*/
- if (unlikely(queue->vif->disabled && queue->id == 0)) {
- xenvif_carrier_off(queue->vif);
- } else if (unlikely(queue->vif->disabled)) {
- /* kthread_stop() would be called upon this thread soon,
- * be a bit proactive
- */
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
- } else if (unlikely(test_and_clear_bit(QUEUE_STATUS_RX_PURGE_EVENT,
- &queue->status))) {
- xenvif_rx_purge_event(queue);
- } else if (!netif_carrier_ok(queue->vif->dev)) {
- /* Another queue stalled and turned the carrier off, so
- * purge the internal queue of queues which were not
- * blocked
- */
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
+ if (unlikely(vif->disabled && queue->id == 0)) {
+ xenvif_carrier_off(vif);
+ xenvif_rx_queue_purge(queue);
+ continue;
}
if (!skb_queue_empty(&queue->rx_queue))
xenvif_rx_action(queue);
+ /* If the guest hasn't provided any Rx slots for a
+ * while it's probably not responsive, drop the
+ * carrier so packets are dropped earlier.
+ */
+ if (xenvif_rx_queue_stalled(queue))
+ xenvif_queue_carrier_off(queue);
+ else if (xenvif_rx_queue_ready(queue))
+ xenvif_queue_carrier_on(queue);
+
+ /* Queued packets may have foreign pages from other
+ * domains. These cannot be queued indefinitely as
+ * this would starve guests of grant refs and transmit
+ * slots.
+ */
+ xenvif_rx_queue_drop_expired(queue);
+
+ xenvif_rx_queue_maybe_wake(queue);
+
cond_resched();
}
/* Bin any remaining skbs */
- while ((skb = skb_dequeue(&queue->rx_queue)) != NULL)
- dev_kfree_skb(skb);
+ xenvif_rx_queue_purge(queue);
return 0;
}
goto failed_init;
rx_drain_timeout_jiffies = msecs_to_jiffies(rx_drain_timeout_msecs);
+ rx_stall_timeout_jiffies = msecs_to_jiffies(rx_stall_timeout_msecs);
#ifdef CONFIG_DEBUG_FS
xen_netback_dbg_root = debugfs_create_dir("xen-netback", NULL);
struct xenvif_queue *queue = m->private;
struct xen_netif_tx_back_ring *tx_ring = &queue->tx;
struct xen_netif_rx_back_ring *rx_ring = &queue->rx;
+ struct netdev_queue *dev_queue;
if (tx_ring->sring) {
struct xen_netif_tx_sring *sring = tx_ring->sring;
queue->credit_timeout.expires,
jiffies);
+ dev_queue = netdev_get_tx_queue(queue->vif->dev, queue->id);
+
+ seq_printf(m, "\nRx internal queue: len %u max %u pkts %u %s\n",
+ queue->rx_queue_len, queue->rx_queue_max,
+ skb_queue_len(&queue->rx_queue),
+ netif_tx_queue_stopped(dev_queue) ? "stopped" : "running");
+
return 0;
}
be->vif->queues = vzalloc(requested_num_queues *
sizeof(struct xenvif_queue));
be->vif->num_queues = requested_num_queues;
+ be->vif->stalled_queues = requested_num_queues;
for (queue_index = 0; queue_index < requested_num_queues; ++queue_index) {
queue = &be->vif->queues[queue_index];
if (!rx_copy)
return -EOPNOTSUPP;
- if (vif->dev->tx_queue_len != 0) {
- if (xenbus_scanf(XBT_NIL, dev->otherend,
- "feature-rx-notify", "%d", &val) < 0)
- val = 0;
- if (val)
- vif->can_queue = 1;
- else
- /* Must be non-zero for pfifo_fast to work. */
- vif->dev->tx_queue_len = 1;
+ if (xenbus_scanf(XBT_NIL, dev->otherend,
+ "feature-rx-notify", "%d", &val) < 0 || val == 0) {
+ xenbus_dev_fatal(dev, -EINVAL, "feature-rx-notify is mandatory");
+ return -EINVAL;
}
if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-sg",
}
EXPORT_SYMBOL_GPL(of_property_read_string);
-/**
- * of_property_read_string_index - Find and read a string from a multiple
- * strings property.
- * @np: device node from which the property value is to be read.
- * @propname: name of the property to be searched.
- * @index: index of the string in the list of strings
- * @out_string: pointer to null terminated return string, modified only if
- * return value is 0.
- *
- * Search for a property in a device tree node and retrieve a null
- * terminated string value (pointer to data, not a copy) in the list of strings
- * contained in that property.
- * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
- * property does not have a value, and -EILSEQ if the string is not
- * null-terminated within the length of the property data.
- *
- * The out_string pointer is modified only if a valid string can be decoded.
- */
-int of_property_read_string_index(struct device_node *np, const char *propname,
- int index, const char **output)
-{
- struct property *prop = of_find_property(np, propname, NULL);
- int i = 0;
- size_t l = 0, total = 0;
- const char *p;
-
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if (strnlen(prop->value, prop->length) >= prop->length)
- return -EILSEQ;
-
- p = prop->value;
-
- for (i = 0; total < prop->length; total += l, p += l) {
- l = strlen(p) + 1;
- if (i++ == index) {
- *output = p;
- return 0;
- }
- }
- return -ENODATA;
-}
-EXPORT_SYMBOL_GPL(of_property_read_string_index);
-
/**
* of_property_match_string() - Find string in a list and return index
* @np: pointer to node containing string list property
end = p + prop->length;
for (i = 0; p < end; i++, p += l) {
- l = strlen(p) + 1;
+ l = strnlen(p, end - p) + 1;
if (p + l > end)
return -EILSEQ;
pr_debug("comparing %s with %s\n", string, p);
EXPORT_SYMBOL_GPL(of_property_match_string);
/**
- * of_property_count_strings - Find and return the number of strings from a
- * multiple strings property.
+ * of_property_read_string_util() - Utility helper for parsing string properties
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
+ * @out_strs: output array of string pointers.
+ * @sz: number of array elements to read.
+ * @skip: Number of strings to skip over at beginning of list.
*
- * Search for a property in a device tree node and retrieve the number of null
- * terminated string contain in it. Returns the number of strings on
- * success, -EINVAL if the property does not exist, -ENODATA if property
- * does not have a value, and -EILSEQ if the string is not null-terminated
- * within the length of the property data.
+ * Don't call this function directly. It is a utility helper for the
+ * of_property_read_string*() family of functions.
*/
-int of_property_count_strings(struct device_node *np, const char *propname)
+int of_property_read_string_helper(struct device_node *np, const char *propname,
+ const char **out_strs, size_t sz, int skip)
{
struct property *prop = of_find_property(np, propname, NULL);
- int i = 0;
- size_t l = 0, total = 0;
- const char *p;
+ int l = 0, i = 0;
+ const char *p, *end;
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
- if (strnlen(prop->value, prop->length) >= prop->length)
- return -EILSEQ;
-
p = prop->value;
+ end = p + prop->length;
- for (i = 0; total < prop->length; total += l, p += l, i++)
- l = strlen(p) + 1;
-
- return i;
+ for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) {
+ l = strnlen(p, end - p) + 1;
+ if (p + l > end)
+ return -EILSEQ;
+ if (out_strs && i >= skip)
+ *out_strs++ = p;
+ }
+ i -= skip;
+ return i <= 0 ? -ENODATA : i;
}
-EXPORT_SYMBOL_GPL(of_property_count_strings);
+EXPORT_SYMBOL_GPL(of_property_read_string_helper);
void of_print_phandle_args(const char *msg, const struct of_phandle_args *args)
{
* This function assign memory region pointed by "memory-region" device tree
* property to the given device.
*/
-void of_reserved_mem_device_init(struct device *dev)
+int of_reserved_mem_device_init(struct device *dev)
{
struct reserved_mem *rmem;
struct device_node *np;
+ int ret;
np = of_parse_phandle(dev->of_node, "memory-region", 0);
if (!np)
- return;
+ return -ENODEV;
rmem = __find_rmem(np);
of_node_put(np);
if (!rmem || !rmem->ops || !rmem->ops->device_init)
- return;
+ return -EINVAL;
+
+ ret = rmem->ops->device_init(rmem, dev);
+ if (ret == 0)
+ dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
- rmem->ops->device_init(rmem, dev);
- dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
+ return ret;
}
/**
selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
}
-static void __init of_selftest_property_match_string(void)
+static void __init of_selftest_property_string(void)
{
+ const char *strings[4];
struct device_node *np;
int rc;
rc = of_property_match_string(np, "phandle-list-names", "third");
selftest(rc == 2, "third expected:0 got:%i\n", rc);
rc = of_property_match_string(np, "phandle-list-names", "fourth");
- selftest(rc == -ENODATA, "unmatched string; rc=%i", rc);
+ selftest(rc == -ENODATA, "unmatched string; rc=%i\n", rc);
rc = of_property_match_string(np, "missing-property", "blah");
- selftest(rc == -EINVAL, "missing property; rc=%i", rc);
+ selftest(rc == -EINVAL, "missing property; rc=%i\n", rc);
rc = of_property_match_string(np, "empty-property", "blah");
- selftest(rc == -ENODATA, "empty property; rc=%i", rc);
+ selftest(rc == -ENODATA, "empty property; rc=%i\n", rc);
rc = of_property_match_string(np, "unterminated-string", "blah");
- selftest(rc == -EILSEQ, "unterminated string; rc=%i", rc);
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+
+ /* of_property_count_strings() tests */
+ rc = of_property_count_strings(np, "string-property");
+ selftest(rc == 1, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "phandle-list-names");
+ selftest(rc == 3, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "unterminated-string");
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "unterminated-string-list");
+ selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc);
+
+ /* of_property_read_string_index() tests */
+ rc = of_property_read_string_index(np, "string-property", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "foobar"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "string-property", 1, strings);
+ selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 1, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "second"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 2, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "third"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "phandle-list-names", 3, strings);
+ selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "unterminated-string", 0, strings);
+ selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "unterminated-string-list", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "unterminated-string-list", 2, strings); /* should fail */
+ selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[1] = NULL;
+
+ /* of_property_read_string_array() tests */
+ rc = of_property_read_string_array(np, "string-property", strings, 4);
+ selftest(rc == 1, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_read_string_array(np, "phandle-list-names", strings, 4);
+ selftest(rc == 3, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_read_string_array(np, "unterminated-string", strings, 4);
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+ /* -- An incorrectly formed string should cause a failure */
+ rc = of_property_read_string_array(np, "unterminated-string-list", strings, 4);
+ selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc);
+ /* -- parsing the correctly formed strings should still work: */
+ strings[2] = NULL;
+ rc = of_property_read_string_array(np, "unterminated-string-list", strings, 2);
+ selftest(rc == 2 && strings[2] == NULL, "of_property_read_string_array() failure; rc=%i\n", rc);
+ strings[1] = NULL;
+ rc = of_property_read_string_array(np, "phandle-list-names", strings, 1);
+ selftest(rc == 1 && strings[1] == NULL, "Overwrote end of string array; rc=%i, str='%s'\n", rc, strings[1]);
}
#define propcmp(p1, p2) (((p1)->length == (p2)->length) && \
of_selftest_find_node_by_name();
of_selftest_dynamic();
of_selftest_parse_phandle_with_args();
- of_selftest_property_match_string();
+ of_selftest_property_string();
of_selftest_property_copy();
of_selftest_changeset();
of_selftest_parse_interrupts();
phandle-list-bad-args = <&provider2 1 0>,
<&provider3 0>;
empty-property;
+ string-property = "foobar";
unterminated-string = [40 41 42 43];
+ unterminated-string-list = "first", "second", [40 41 42 43];
};
};
};
goto err_pcie;
}
- /* allow the clocks to stabilize */
- usleep_range(200, 500);
-
/* power up core phy and enable ref clock */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+ /*
+ * the async reset input need ref clock to sync internally,
+ * when the ref clock comes after reset, internal synced
+ * reset time is too short, cannot meet the requirement.
+ * add one ~10us delay here.
+ */
+ udelay(10);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
+ /* allow the clocks to stabilize */
+ usleep_range(200, 500);
+
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
gpio_set_value(imx6_pcie->reset_gpio, 0);
goto err_out_none;
}
- if (!dev->port->subordinate) {
- /* Can happen if we run out of bus numbers during probe */
- dev_err(&dev->device,
- "Hotplug bridge without secondary bus, ignoring\n");
- goto err_out_none;
- }
-
ctrl = pcie_init(dev);
if (!ctrl) {
dev_err(&dev->device, "Controller initialization failed\n");
}
static DEVICE_ATTR_RO(modalias);
-static ssize_t enabled_store(struct device *dev, struct device_attribute *attr,
+static ssize_t enable_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct pci_dev *pdev = to_pci_dev(dev);
return result < 0 ? result : count;
}
-static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
+static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pci_dev *pdev;
pdev = to_pci_dev(dev);
return sprintf(buf, "%u\n", atomic_read(&pdev->enable_cnt));
}
-static DEVICE_ATTR_RW(enabled);
+static DEVICE_ATTR_RW(enable);
#ifdef CONFIG_NUMA
static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr,
#endif
&dev_attr_dma_mask_bits.attr,
&dev_attr_consistent_dma_mask_bits.attr,
- &dev_attr_enabled.attr,
+ &dev_attr_enable.attr,
&dev_attr_broken_parity_status.attr,
&dev_attr_msi_bus.attr,
#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
otg->phy = &phy->phy;
platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL);
- if (IS_ERR(generic_phy))
+ if (IS_ERR(generic_phy)) {
+ pm_runtime_disable(phy->dev);
return PTR_ERR(generic_phy);
+ }
phy_set_drvdata(generic_phy, phy);
- pm_runtime_enable(phy->dev);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
spin_lock_irqsave(&vg->lock, flags);
value = readl(reg);
+ WARN(value & BYT_DIRECT_IRQ_EN,
+ "Bad pad config for io mode, force direct_irq_en bit clearing");
+
/* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
* are used to indicate high and low level triggering
*/
- value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+ value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG |
+ BYT_TRIG_LVL);
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
"Potential Error: Setting GPIO with direct_irq_en to output");
reg_val = readl(reg) | BYT_DIR_MASK;
- reg_val &= ~BYT_OUTPUT_EN;
+ reg_val &= ~(BYT_OUTPUT_EN | BYT_INPUT_EN);
if (value)
writel(reg_val | BYT_LEVEL, reg);
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"),
},
},
+ {
+ /*
+ * Note no video_set_backlight_video_vendor, we must use the
+ * acer interface, as there is no native backlight interface.
+ */
+ .ident = "Acer KAV80",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"),
+ },
+ },
{}
};
},
.driver_data = &quirk_asus_wapf4,
},
+ {
+ .callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X550VB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X550VB"),
+ },
+ .driver_data = &quirk_asus_wapf4,
+ },
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X55A",
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
},
},
+ {
+ .ident = "Lenovo Yoga 3 Pro 1370",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3 Pro-1370"),
+ },
+ },
{}
};
},
.driver_data = &samsung_broken_acpi_video,
},
+ {
+ .callback = samsung_dmi_matched,
+ .ident = "NC210",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
+ DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
{
.callback = samsung_dmi_matched,
.ident = "730U3E/740U3E",
DMI_MATCH(DMI_PRODUCT_NAME, "Qosmio X75-A"),
},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A50-A"),
+ },
+ },
{}
};
struct max1586_platform_data *pdata)
{
struct max1586_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
struct device_node *np = dev->of_node;
int i, matched;
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct device_node *pmic_np, *regulators_np;
struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
+ struct of_regulator_match rmatch = { };
unsigned int i;
pmic_np = iodev->dev->of_node;
struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max77693_regulator_data *rdata = NULL;
int num_rdata, i;
- struct regulator_config config;
+ struct regulator_config config = { };
num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata);
if (!rdata || num_rdata <= 0) {
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct device_node *pmic_np, *regulators_np;
struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
+ struct of_regulator_match rmatch = { };
unsigned int i;
pmic_np = iodev->dev->of_node;
int matched, i;
struct device_node *np;
struct max8660_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)] = { };
np = of_get_child_by_name(dev->of_node, "regulators");
if (!np) {
search = dev->of_node;
if (!search) {
- dev_err(dev, "Failed to find regulator container node\n");
+ dev_dbg(dev, "Failed to find regulator container node '%s'\n",
+ desc->regulators_node);
return NULL;
}
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
- struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
+ struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { };
struct device_node *reg_np = NULL;
struct regulator_config config = { };
struct s2mpa01_info *s2mpa01;
config RTC_DRV_PM8XXX
tristate "Qualcomm PMIC8XXX RTC"
- depends on MFD_PM8XXX
+ depends on MFD_PM8XXX || MFD_SPMI_PMIC
help
If you say yes here you get support for the
Qualcomm PMIC8XXX RTC.
dev_err(dev, "bq32k: diode and resistor mismatch\n");
return -EINVAL;
}
- reg = 0x25;
+ reg = 0x45;
break;
default:
/* RTC_CTRL register bit fields */
#define PM8xxx_RTC_ENABLE BIT(7)
-#define PM8xxx_RTC_ALARM_ENABLE BIT(1)
#define PM8xxx_RTC_ALARM_CLEAR BIT(0)
#define NUM_8_BIT_RTC_REGS 0x4
+/**
+ * struct pm8xxx_rtc_regs - describe RTC registers per PMIC versions
+ * @ctrl: base address of control register
+ * @write: base address of write register
+ * @read: base address of read register
+ * @alarm_ctrl: base address of alarm control register
+ * @alarm_ctrl2: base address of alarm control2 register
+ * @alarm_rw: base address of alarm read-write register
+ * @alarm_en: alarm enable mask
+ */
+struct pm8xxx_rtc_regs {
+ unsigned int ctrl;
+ unsigned int write;
+ unsigned int read;
+ unsigned int alarm_ctrl;
+ unsigned int alarm_ctrl2;
+ unsigned int alarm_rw;
+ unsigned int alarm_en;
+};
+
/**
* struct pm8xxx_rtc - rtc driver internal structure
* @rtc: rtc device for this driver.
* @regmap: regmap used to access RTC registers
* @allow_set_time: indicates whether writing to the RTC is allowed
* @rtc_alarm_irq: rtc alarm irq number.
- * @rtc_base: address of rtc control register.
- * @rtc_read_base: base address of read registers.
- * @rtc_write_base: base address of write registers.
- * @alarm_rw_base: base address of alarm registers.
* @ctrl_reg: rtc control register.
* @rtc_dev: device structure.
* @ctrl_reg_lock: spinlock protecting access to ctrl_reg.
struct regmap *regmap;
bool allow_set_time;
int rtc_alarm_irq;
- int rtc_base;
- int rtc_read_base;
- int rtc_write_base;
- int alarm_rw_base;
- u8 ctrl_reg;
+ const struct pm8xxx_rtc_regs *regs;
struct device *rtc_dev;
spinlock_t ctrl_reg_lock;
};
{
int rc, i;
unsigned long secs, irq_flags;
- u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0, ctrl_reg;
+ u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0;
+ unsigned int ctrl_reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
if (!rtc_dd->allow_set_time)
return -EACCES;
dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- ctrl_reg = rtc_dd->ctrl_reg;
- if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
+ rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
+
+ if (ctrl_reg & regs->alarm_en) {
alarm_enabled = 1;
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ ctrl_reg &= ~regs->alarm_en;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
- } else {
- spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
}
/* Write 0 to Byte[0] */
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, 0);
+ rc = regmap_write(rtc_dd->regmap, regs->write, 0);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
/* Write Byte[1], Byte[2], Byte[3] */
- rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->rtc_write_base + 1,
+ rc = regmap_bulk_write(rtc_dd->regmap, regs->write + 1,
&value[1], sizeof(value) - 1);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
}
/* Write Byte[0] */
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, value[0]);
+ rc = regmap_write(rtc_dd->regmap, regs->write, value[0]);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
if (alarm_enabled) {
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ ctrl_reg |= regs->alarm_en;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
}
rtc_rw_fail:
- if (alarm_enabled)
- spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
return rc;
}
unsigned long secs;
unsigned int reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
- value, sizeof(value));
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
if (rc) {
dev_err(dev, "RTC read data register failed\n");
return rc;
* Read the LSB again and check if there has been a carry over.
* If there is, redo the read operation.
*/
- rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_read_base, ®);
+ rc = regmap_read(rtc_dd->regmap, regs->read, ®);
if (rc < 0) {
dev_err(dev, "RTC read data register failed\n");
return rc;
}
if (unlikely(reg < value[0])) {
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
value, sizeof(value));
if (rc) {
dev_err(dev, "RTC read data register failed\n");
static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
int rc, i;
- u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
+ u8 value[NUM_8_BIT_RTC_REGS];
+ unsigned int ctrl_reg;
unsigned long secs, irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
rtc_tm_to_time(&alarm->time, &secs);
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
if (rc) {
dev_err(dev, "Write to RTC ALARM register failed\n");
goto rtc_rw_fail;
}
- ctrl_reg = rtc_dd->ctrl_reg;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
if (alarm->enabled)
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg |= regs->alarm_en;
else
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
- dev_err(dev, "Write to RTC control register failed\n");
+ dev_err(dev, "Write to RTC alarm control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
-
dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
alarm->time.tm_hour, alarm->time.tm_min,
alarm->time.tm_sec, alarm->time.tm_mday,
u8 value[NUM_8_BIT_RTC_REGS];
unsigned long secs;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
if (rc) {
dev_err(dev, "RTC alarm time read failed\n");
int rc;
unsigned long irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
- u8 ctrl_reg;
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+ unsigned int ctrl_reg;
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- ctrl_reg = rtc_dd->ctrl_reg;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
if (enable)
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg |= regs->alarm_en;
else
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
-
rtc_rw_fail:
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
return rc;
static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
{
struct pm8xxx_rtc *rtc_dd = dev_id;
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
unsigned int ctrl_reg;
int rc;
unsigned long irq_flags;
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
/* Clear the alarm enable bit */
- ctrl_reg = rtc_dd->ctrl_reg;
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc) {
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ goto rtc_alarm_handled;
+ }
+
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
dev_err(rtc_dd->rtc_dev,
- "Write to RTC control register failed\n");
+ "Write to alarm control register failed\n");
goto rtc_alarm_handled;
}
- rtc_dd->ctrl_reg = ctrl_reg;
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
/* Clear RTC alarm register */
- rc = regmap_read(rtc_dd->regmap,
- rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
- &ctrl_reg);
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl2, &ctrl_reg);
if (rc) {
dev_err(rtc_dd->rtc_dev,
- "RTC Alarm control register read failed\n");
+ "RTC Alarm control2 register read failed\n");
goto rtc_alarm_handled;
}
- ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
- rc = regmap_write(rtc_dd->regmap,
- rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
- ctrl_reg);
+ ctrl_reg |= PM8xxx_RTC_ALARM_CLEAR;
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl2, ctrl_reg);
if (rc)
dev_err(rtc_dd->rtc_dev,
- "Write to RTC Alarm control register failed\n");
+ "Write to RTC Alarm control2 register failed\n");
rtc_alarm_handled:
return IRQ_HANDLED;
}
+static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd)
+{
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+ unsigned int ctrl_reg;
+ int rc;
+
+ /* Check if the RTC is on, else turn it on */
+ rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+ if (rc)
+ return rc;
+
+ if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+ ctrl_reg |= PM8xxx_RTC_ENABLE;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+static const struct pm8xxx_rtc_regs pm8921_regs = {
+ .ctrl = 0x11d,
+ .write = 0x11f,
+ .read = 0x123,
+ .alarm_rw = 0x127,
+ .alarm_ctrl = 0x11d,
+ .alarm_ctrl2 = 0x11e,
+ .alarm_en = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8058_regs = {
+ .ctrl = 0x1e8,
+ .write = 0x1ea,
+ .read = 0x1ee,
+ .alarm_rw = 0x1f2,
+ .alarm_ctrl = 0x1e8,
+ .alarm_ctrl2 = 0x1e9,
+ .alarm_en = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8941_regs = {
+ .ctrl = 0x6046,
+ .write = 0x6040,
+ .read = 0x6048,
+ .alarm_rw = 0x6140,
+ .alarm_ctrl = 0x6146,
+ .alarm_ctrl2 = 0x6148,
+ .alarm_en = BIT(7),
+};
+
/*
* Hardcoded RTC bases until IORESOURCE_REG mapping is figured out
*/
static const struct of_device_id pm8xxx_id_table[] = {
- { .compatible = "qcom,pm8921-rtc", .data = (void *) 0x11D },
- { .compatible = "qcom,pm8058-rtc", .data = (void *) 0x1E8 },
+ { .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+ { .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
+ { .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
{ },
};
MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
static int pm8xxx_rtc_probe(struct platform_device *pdev)
{
int rc;
- unsigned int ctrl_reg;
struct pm8xxx_rtc *rtc_dd;
const struct of_device_id *match;
rtc_dd->allow_set_time = of_property_read_bool(pdev->dev.of_node,
"allow-set-time");
- rtc_dd->rtc_base = (long) match->data;
-
- /* Setup RTC register addresses */
- rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
- rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
- rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
-
+ rtc_dd->regs = match->data;
rtc_dd->rtc_dev = &pdev->dev;
- /* Check if the RTC is on, else turn it on */
- rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_base, &ctrl_reg);
- if (rc) {
- dev_err(&pdev->dev, "RTC control register read failed!\n");
+ rc = pm8xxx_rtc_enable(rtc_dd);
+ if (rc)
return rc;
- }
-
- if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
- ctrl_reg |= PM8xxx_RTC_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
- if (rc) {
- dev_err(&pdev->dev,
- "Write to RTC control register failed\n");
- return rc;
- }
- }
-
- rtc_dd->ctrl_reg = ctrl_reg;
platform_set_drvdata(pdev, rtc_dd);
}
clk_prepare_enable(info->rtc_clk);
- info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
- if (IS_ERR(info->rtc_src_clk)) {
- dev_err(&pdev->dev, "failed to find rtc source clock\n");
- return PTR_ERR(info->rtc_src_clk);
+ if (info->data->needs_src_clk) {
+ info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
+ if (IS_ERR(info->rtc_src_clk)) {
+ dev_err(&pdev->dev,
+ "failed to find rtc source clock\n");
+ return PTR_ERR(info->rtc_src_clk);
+ }
+ clk_prepare_enable(info->rtc_src_clk);
}
- clk_prepare_enable(info->rtc_src_clk);
-
/* check to see if everything is setup correctly */
if (info->data->enable)
struct virtio_ccw_device *vcdev = dev_get_drvdata(&cdev->dev);
int i;
struct virtqueue *vq;
- struct virtio_driver *drv;
if (!vcdev)
return;
* If the source port is outside our allocation range, the caller is
* responsible for keeping track of their port usage.
*/
+
+static struct cxgbi_sock *find_sock_on_port(struct cxgbi_device *cdev,
+ unsigned char port_id)
+{
+ struct cxgbi_ports_map *pmap = &cdev->pmap;
+ unsigned int i;
+ unsigned int used;
+
+ if (!pmap->max_connect || !pmap->used)
+ return NULL;
+
+ spin_lock_bh(&pmap->lock);
+ used = pmap->used;
+ for (i = 0; used && i < pmap->max_connect; i++) {
+ struct cxgbi_sock *csk = pmap->port_csk[i];
+
+ if (csk) {
+ if (csk->port_id == port_id) {
+ spin_unlock_bh(&pmap->lock);
+ return csk;
+ }
+ used--;
+ }
+ }
+ spin_unlock_bh(&pmap->lock);
+
+ return NULL;
+}
+
static int sock_get_port(struct cxgbi_sock *csk)
{
struct cxgbi_device *cdev = csk->cdev;
csk->daddr6.sin6_addr = daddr6->sin6_addr;
csk->daddr6.sin6_port = daddr6->sin6_port;
csk->daddr6.sin6_family = daddr6->sin6_family;
+ csk->saddr6.sin6_family = daddr6->sin6_family;
csk->saddr6.sin6_addr = pref_saddr;
neigh_release(n);
break;
case ISCSI_HOST_PARAM_IPADDRESS:
{
- __be32 addr;
-
- addr = cxgbi_get_iscsi_ipv4(chba);
- len = sprintf(buf, "%pI4", &addr);
+ struct cxgbi_sock *csk = find_sock_on_port(chba->cdev,
+ chba->port_id);
+ if (csk) {
+ len = sprintf(buf, "%pIS",
+ (struct sockaddr *)&csk->saddr);
+ }
log_debug(1 << CXGBI_DBG_ISCSI,
- "hba %s, ipv4 %pI4.\n", chba->ndev->name, &addr);
+ "hba %s, addr %s.\n", chba->ndev->name, buf);
break;
}
default:
chba->ndev->name);
}
-static inline __be32 cxgbi_get_iscsi_ipv4(struct cxgbi_hba *chba)
-{
- return chba->ipv4addr;
-}
-
struct cxgbi_device *cxgbi_device_register(unsigned int, unsigned int);
void cxgbi_device_unregister(struct cxgbi_device *);
void cxgbi_device_unregister_all(unsigned int flag);
blk_mq_start_request(req);
}
+ if (blk_queue_tagged(q))
+ req->cmd_flags |= REQ_QUEUED;
+ else
+ req->cmd_flags &= ~REQ_QUEUED;
+
scsi_init_cmd_errh(cmd);
cmd->scsi_done = scsi_mq_done;
{ .compatible = "arm,realview-pb11mp-soc", },
{ .compatible = "arm,realview-pba8-soc", },
{ .compatible = "arm,realview-pbx-soc", },
+ { }
};
static u32 realview_coreid;
#define SPI_TCR 0x08
-#define SPI_CTAR(x) (0x0c + (x * 4))
+#define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4))
#define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27)
#define SPI_CTAR_CPOL(x) ((x) << 26)
#define SPI_CTAR_CPHA(x) ((x) << 25)
#define SPI_PUSHR 0x34
#define SPI_PUSHR_CONT (1 << 31)
-#define SPI_PUSHR_CTAS(x) (((x) & 0x00000007) << 28)
+#define SPI_PUSHR_CTAS(x) (((x) & 0x00000003) << 28)
#define SPI_PUSHR_EOQ (1 << 27)
#define SPI_PUSHR_CTCNT (1 << 26)
#define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16)
if (status != 0)
return status;
write_SSCR0(0, drv_data->ioaddr);
- clk_disable_unprepare(ssp->clk);
+
+ if (!pm_runtime_suspended(dev))
+ clk_disable_unprepare(ssp->clk);
return 0;
}
pxa2xx_spi_dma_resume(drv_data);
/* Enable the SSP clock */
- clk_prepare_enable(ssp->clk);
+ if (!pm_runtime_suspended(dev))
+ clk_prepare_enable(ssp->clk);
/* Restore LPSS private register bits */
lpss_ssp_setup(drv_data);
struct logger_log *log = file_get_log(iocb->ki_filp);
struct logger_entry header;
struct timespec now;
- size_t len, count;
+ size_t len, count, w_off;
count = min_t(size_t, iocb->ki_nbytes, LOGGER_ENTRY_MAX_PAYLOAD);
memcpy(log->buffer + log->w_off, &header, len);
memcpy(log->buffer, (char *)&header + len, sizeof(header) - len);
- len = min(count, log->size - log->w_off);
+ /* Work with a copy until we are ready to commit the whole entry */
+ w_off = logger_offset(log, log->w_off + sizeof(struct logger_entry));
- if (copy_from_iter(log->buffer + log->w_off, len, from) != len) {
+ len = min(count, log->size - w_off);
+
+ if (copy_from_iter(log->buffer + w_off, len, from) != len) {
/*
- * Note that by not updating w_off, this abandons the
+ * Note that by not updating log->w_off, this abandons the
* portion of the new entry that *was* successfully
* copied, just above. This is intentional to avoid
* message corruption from missing fragments.
return -EFAULT;
}
- log->w_off = logger_offset(log, log->w_off + count);
+ log->w_off = logger_offset(log, w_off + count);
mutex_unlock(&log->mutex);
/* wake up any blocked readers */
config COMEDI_II_PCI20KC
tristate "Intelligent Instruments PCI-20001C carrier support"
+ depends on HAS_IOMEM
---help---
Enable support for Intelligent Instruments PCI-20001C carrier
PCI-20001, PCI-20006 and PCI-20341
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3120/3001 support"
depends on HAS_DMA
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_3120/3001 cards
unsigned int *chanlist;
int ret;
- /* user_chanlist could be NULL for do_cmdtest ioctls */
- if (!user_chanlist)
- return 0;
-
+ cmd->chanlist = NULL;
chanlist = memdup_user(user_chanlist,
cmd->chanlist_len * sizeof(unsigned int));
if (IS_ERR(chanlist))
s = &dev->subdevices[cmd.subdev];
- /* load channel/gain list */
- ret = __comedi_get_user_chanlist(dev, s, user_chanlist, &cmd);
- if (ret)
- return ret;
+ /* user_chanlist can be NULL for COMEDI_CMDTEST ioctl */
+ if (user_chanlist) {
+ /* load channel/gain list */
+ ret = __comedi_get_user_chanlist(dev, s, user_chanlist, &cmd);
+ if (ret)
+ return ret;
+ }
ret = s->do_cmdtest(dev, s, &cmd);
+ kfree(cmd.chanlist); /* free kernel copy of user chanlist */
+
/* restore chanlist pointer before copying back */
cmd.chanlist = (unsigned int __force *)user_chanlist;
*/
-static int do_lock_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_lock_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
int ret = 0;
This function isn't protected by the semaphore, since
we already own the lock.
*/
-static int do_unlock_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_unlock_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
struct comedi_subdevice *s;
nothing
*/
-static int do_cancel_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_cancel_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
struct comedi_subdevice *s;
nothing
*/
-static int do_poll_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_poll_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
struct comedi_subdevice *s;
/* Grab all IRQ sources */
for (i = 0; i < of_cfg->irq_count; i++) {
lradc->irq[i] = platform_get_irq(pdev, i);
- if (lradc->irq[i] < 0)
- return lradc->irq[i];
+ if (lradc->irq[i] < 0) {
+ ret = lradc->irq[i];
+ goto err_clk;
+ }
ret = devm_request_irq(dev, lradc->irq[i],
mxs_lradc_handle_irq, 0,
of_cfg->irq_name[i], iio);
if (ret)
- return ret;
+ goto err_clk;
}
lradc->vref_mv = of_cfg->vref_mv;
&mxs_lradc_trigger_handler,
&mxs_lradc_buffer_ops);
if (ret)
- return ret;
+ goto err_clk;
ret = mxs_lradc_trigger_init(iio);
if (ret)
mxs_lradc_trigger_remove(iio);
err_trig:
iio_triggered_buffer_cleanup(iio);
+err_clk:
+ clk_disable_unprepare(lradc->clk);
return ret;
}
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
.address = AD5933_REG_TEMP_DATA,
+ .scan_index = -1,
.scan_type = {
.sign = 's',
.realbits = 14,
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "real_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "real",
.address = AD5933_REG_REAL_DATA,
.scan_index = 0,
.scan_type = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "imag_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "imag",
.address = AD5933_REG_IMAG_DATA,
.scan_index = 1,
.scan_type = {
indio_dev->name = id->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ad5933_channels;
- indio_dev->num_channels = 1; /* only register temp0_input */
+ indio_dev->num_channels = ARRAY_SIZE(ad5933_channels);
ret = ad5933_register_ring_funcs_and_init(indio_dev);
if (ret)
goto error_disable_reg;
- /* skip temp0_input, register in0_(real|imag)_raw */
- ret = iio_buffer_register(indio_dev, &ad5933_channels[1], 2);
+ ret = iio_buffer_register(indio_dev, ad5933_channels,
+ ARRAY_SIZE(ad5933_channels));
if (ret)
goto error_unreg_ring;
u8 *tx;
u8 *rx;
struct mutex buf_lock;
- const struct iio_chan_spec *ade7758_ring_channels;
struct spi_transfer ring_xfer[4];
struct spi_message ring_msg;
/*
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
.scan_index = 0,
.scan_type = {
.type = IIO_CURRENT,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
.scan_index = 1,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
.scan_index = 2,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
.scan_index = 3,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
.scan_index = 4,
.scan_type = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
.scan_index = 5,
.scan_type = {
.type = IIO_CURRENT,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
.scan_index = 6,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
.scan_index = 7,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
.scan_index = 8,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
.scan_index = 9,
.scan_type = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
.scan_index = 10,
.scan_type = {
.type = IIO_CURRENT,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
.scan_index = 11,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
.scan_index = 12,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
.scan_index = 13,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
.scan_index = 14,
.scan_type = {
goto error_free_rx;
}
st->us = spi;
- st->ade7758_ring_channels = &ade7758_channels[0];
mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &ade7758_info;
indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ade7758_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ade7758_channels);
ret = ade7758_configure_ring(indio_dev);
if (ret)
**/
static int ade7758_ring_preenable(struct iio_dev *indio_dev)
{
- struct ade7758_state *st = iio_priv(indio_dev);
unsigned channel;
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
+ if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
return -EINVAL;
channel = find_first_bit(indio_dev->active_scan_mask,
indio_dev->masklength);
ade7758_write_waveform_type(&indio_dev->dev,
- st->ade7758_ring_channels[channel].address);
+ indio_dev->channels[channel].address);
return 0;
}
};
struct eeprom_priv {
+ u8 mac_addr[6]; /* PermanentAddress */
u8 bautoload_fail_flag;
u8 bloadfile_fail_flag;
u8 bloadmac_fail_flag;
/* u8 bempty; */
/* u8 sys_config; */
- u8 mac_addr[6]; /* PermanentAddress */
/* u8 config0; */
u16 channel_plan;
/* u8 country_string[3]; */
int measure_freq;
int ret;
+ if (!cpufreq_get_current_driver()) {
+ dev_dbg(&pdev->dev, "no cpufreq driver!");
+ return -EPROBE_DEFER;
+ }
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
return ret;
}
+ data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->thermal_clk)) {
+ ret = PTR_ERR(data->thermal_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to get thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
+ /*
+ * Thermal sensor needs clk on to get correct value, normally
+ * we should enable its clk before taking measurement and disable
+ * clk after measurement is done, but if alarm function is enabled,
+ * hardware will auto measure the temperature periodically, so we
+ * need to keep the clk always on for alarm function.
+ */
+ ret = clk_prepare_enable(data->thermal_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
data->tz = thermal_zone_device_register("imx_thermal_zone",
IMX_TRIP_NUM,
BIT(IMX_TRIP_PASSIVE), data,
ret = PTR_ERR(data->tz);
dev_err(&pdev->dev,
"failed to register thermal zone device %d\n", ret);
+ clk_disable_unprepare(data->thermal_clk);
cpufreq_cooling_unregister(data->cdev);
return ret;
}
- data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->thermal_clk)) {
- dev_warn(&pdev->dev, "failed to get thermal clk!\n");
- } else {
- /*
- * Thermal sensor needs clk on to get correct value, normally
- * we should enable its clk before taking measurement and disable
- * clk after measurement is done, but if alarm function is enabled,
- * hardware will auto measure the temperature periodically, so we
- * need to keep the clk always on for alarm function.
- */
- ret = clk_prepare_enable(data->thermal_clk);
- if (ret)
- dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
- }
-
/* Enable measurements at ~ 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
if (ACPI_FAILURE(status))
return -EIO;
- *temp = DECI_KELVIN_TO_MILLI_CELSIUS(hyst, KELVIN_OFFSET);
+ /*
+ * Thermal hysteresis represents a temperature difference.
+ * Kelvin and Celsius have same degree size. So the
+ * conversion here between tenths of degree Kelvin unit
+ * and Milli-Celsius unit is just to multiply 100.
+ */
+ *temp = hyst * 100;
return 0;
}
int (*get_trend)(void *, long *))
{
struct device_node *np, *child, *sensor_np;
+ struct thermal_zone_device *tzd = ERR_PTR(-ENODEV);
np = of_find_node_by_name(NULL, "thermal-zones");
if (!np)
return ERR_PTR(-ENODEV);
- if (!dev || !dev->of_node)
+ if (!dev || !dev->of_node) {
+ of_node_put(np);
return ERR_PTR(-EINVAL);
+ }
- sensor_np = dev->of_node;
+ sensor_np = of_node_get(dev->of_node);
for_each_child_of_node(np, child) {
struct of_phandle_args sensor_specs;
}
if (sensor_specs.np == sensor_np && id == sensor_id) {
- of_node_put(np);
- return thermal_zone_of_add_sensor(child, sensor_np,
- data,
- get_temp,
- get_trend);
+ tzd = thermal_zone_of_add_sensor(child, sensor_np,
+ data,
+ get_temp,
+ get_trend);
+ of_node_put(sensor_specs.np);
+ of_node_put(child);
+ goto exit;
}
+ of_node_put(sensor_specs.np);
}
+exit:
+ of_node_put(sensor_np);
of_node_put(np);
- return ERR_PTR(-ENODEV);
+ return tzd;
}
EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register);
/* Required for cooling map matching */
trip->np = np;
+ of_node_get(np);
return 0;
}
return tz;
free_tbps:
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
free_trips:
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
+ of_node_put(gchild);
free_tz:
kfree(tz);
of_node_put(child);
static inline void of_thermal_free_zone(struct __thermal_zone *tz)
{
+ int i;
+
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
kfree(tz);
}
/* attempting to build remaining zones still */
}
}
+ of_node_put(np);
return 0;
exit_free:
+ of_node_put(child);
+ of_node_put(np);
of_thermal_free_zone(tz);
/* no memory available, so free what we have built */
kfree(zone->ops);
of_thermal_free_zone(zone->devdata);
}
+ of_node_put(np);
}
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
-#define MAX_THRESHOLD_LEVS 5
+#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;
- if (pdata->cal_mode == HW_MODE)
- return temp;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp should range between 25 and 125 */
- if (temp < 25 || temp > 125) {
- temp_code = -EINVAL;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp_code = (temp - pdata->first_point_trim) *
temp_code = temp + pdata->default_temp_offset;
break;
}
-out:
+
return temp_code;
}
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
- if (pdata->cal_mode == HW_MODE)
- return temp_code;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp_code should range between 75 and 175 */
- if (temp_code < 75 || temp_code > 175) {
- temp = -ENODATA;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp = (temp_code - data->temp_error1) *
temp = temp_code - pdata->default_temp_offset;
break;
}
-out:
+
return temp;
}
+static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ const struct exynos_tmu_registers *reg = data->pdata->registers;
+ unsigned int val_irq;
+
+ val_irq = readl(data->base + reg->tmu_intstat);
+ /*
+ * Clear the interrupts. Please note that the documentation for
+ * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+ * states that INTCLEAR register has a different placing of bits
+ * responsible for FALL IRQs than INTSTAT register. Exynos5420
+ * and Exynos5440 documentation is correct (Exynos4210 doesn't
+ * support FALL IRQs at all).
+ */
+ writel(val_irq, data->base + reg->tmu_intclear);
+}
+
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con;
+ unsigned int status, trim_info = 0, con, ctrl;
unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i, trigger_levs = 0;
+ int ret = 0, threshold_code, i;
mutex_lock(&data->lock);
clk_enable(data->clk);
}
}
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
- __raw_writel(1, data->base + reg->triminfo_ctrl);
-
- if (pdata->cal_mode == HW_MODE)
- goto skip_calib_data;
+ if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+ for (i = 0; i < reg->triminfo_ctrl_count; i++) {
+ if (pdata->triminfo_reload[i]) {
+ ctrl = readl(data->base +
+ reg->triminfo_ctrl[i]);
+ ctrl |= pdata->triminfo_reload[i];
+ writel(ctrl, data->base +
+ reg->triminfo_ctrl[i]);
+ }
+ }
+ }
/* Save trimming info in order to perform calibration */
if (data->soc == SOC_ARCH_EXYNOS5440) {
trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
- data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
+ data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
if (!data->temp_error2)
data->temp_error2 =
- (pdata->efuse_value >> reg->triminfo_85_shift) &
+ (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
-skip_calib_data:
- if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
- dev_err(&pdev->dev, "Invalid max trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- for (i = 0; i < pdata->max_trigger_level; i++) {
- if (!pdata->trigger_levels[i])
- continue;
-
- if ((pdata->trigger_type[i] == HW_TRIP) &&
- (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
- dev_err(&pdev->dev, "Invalid hw trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* Count trigger levels except the HW trip*/
- if (!(pdata->trigger_type[i] == HW_TRIP))
- trigger_levs++;
- }
-
rising_threshold = readl(data->base + reg->threshold_th0);
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
writeb(threshold_code,
data->base + reg->threshold_temp);
- for (i = 0; i < trigger_levs; i++)
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++)
writeb(pdata->trigger_levels[i], data->base +
reg->threshold_th0 + i * sizeof(reg->threshold_th0));
- writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
} else {
/* Write temperature code for rising and falling threshold */
- for (i = 0;
- i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
if (pdata->threshold_falling) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i] -
pdata->threshold_falling);
- if (threshold_code > 0)
- falling_threshold |=
- threshold_code << 8 * i;
+ falling_threshold |= threshold_code << 8 * i;
}
}
writel(falling_threshold,
data->base + reg->threshold_th1);
- writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
- (reg->intclr_fall_mask << reg->intclr_fall_shift),
- data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
/* if last threshold limit is also present */
i = pdata->max_trigger_level - 1;
(pdata->trigger_type[i] == HW_TRIP)) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
/* 1-4 level to be assigned in th0 reg */
rising_threshold &= ~(0xff << 8 * i);
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int con, interrupt_en, cal_val;
+ unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
if (pdata->test_mux)
con |= (pdata->test_mux << reg->test_mux_addr_shift);
- if (pdata->reference_voltage) {
- con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
- con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
- }
+ con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+ con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
- if (pdata->gain) {
- con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
- con |= (pdata->gain << reg->buf_slope_sel_shift);
- }
+ con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(reg->therm_trip_mode_mask <<
con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
}
- if (pdata->cal_mode == HW_MODE) {
- con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
- cal_val = 0;
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- cal_val = 3;
- break;
- case TYPE_ONE_POINT_TRIMMING_85:
- cal_val = 2;
- break;
- case TYPE_ONE_POINT_TRIMMING_25:
- cal_val = 1;
- break;
- case TYPE_NONE:
- break;
- default:
- dev_err(&pdev->dev, "Invalid calibration type, using none\n");
- }
- con |= cal_val << reg->calib_mode_shift;
- }
-
if (on) {
- con |= (1 << reg->core_en_shift);
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
- con &= ~(1 << reg->core_en_shift);
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
clk_enable(data->clk);
temp_code = readb(data->base + reg->tmu_cur_temp);
- temp = code_to_temp(data, temp_code);
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ /* temp_code should range between 75 and 175 */
+ if (temp_code < 75 || temp_code > 175) {
+ temp = -ENODATA;
+ goto out;
+ }
+
+ temp = code_to_temp(data, temp_code);
+out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
struct exynos_tmu_data, irq_work);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val_irq, val_type;
+ unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
- val_irq = readl(data->base + reg->tmu_intstat);
- /* clear the interrupts */
- writel(val_irq, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
clk_disable(data->clk);
mutex_unlock(&data->lock);
TYPE_NONE,
};
-enum calibration_mode {
- SW_MODE,
- HW_MODE,
-};
-
enum soc_type {
SOC_ARCH_EXYNOS3250 = 1,
SOC_ARCH_EXYNOS4210,
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
* @triminfo_data: register containing 2 pont trimming data
- * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
- * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
- * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
- reg.
+ * @triminfo_ctrl_count: the number of trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
- * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
- * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
* @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
* @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
- * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
- register.
- * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
- * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl
- register.
- * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl
- register.
- * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in
- tmu_ctrl register.
- * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
- * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp
- register.
* @threshold_temp: register containing the base threshold level.
* @threshold_th0: Register containing first set of rising levels.
- * @threshold_th0_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th0_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th0_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th0_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th1: Register containing second set of rising levels.
- * @threshold_th1_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th1_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th1_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th1_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th2: Register containing third set of rising levels.
- * @threshold_th2_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th3: Register containing fourth set of rising levels.
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
- * @inten_fall1_shift: shift bits of falling 1 interrupt bits.
- * @inten_fall2_shift: shift bits of falling 2 interrupt bits.
- * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
- * @intclr_fall_shift: shift bits for interrupt clear fall 0
- * @intclr_rise_shift: shift bits of all rising interrupt bits.
- * @intclr_rise_mask: mask bits of all rising interrupt bits.
- * @intclr_fall_mask: mask bits of all rising interrupt bits.
* @emul_con: TMU emulation controller register.
* @emul_temp_shift: shift bits of emulation temperature.
* @emul_time_shift: shift bits of emulation time.
- * @emul_time_mask: mask bits of emulation time.
* @tmu_irqstatus: register to find which TMU generated interrupts.
* @tmu_pmin: register to get/set the Pmin value.
*/
struct exynos_tmu_registers {
u32 triminfo_data;
- u32 triminfo_25_shift;
- u32 triminfo_85_shift;
- u32 triminfo_ctrl;
- u32 triminfo_ctrl1;
- u32 triminfo_reload_shift;
+ u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
+ u32 triminfo_ctrl_count;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
- u32 buf_vref_sel_shift;
- u32 buf_vref_sel_mask;
u32 therm_trip_mode_shift;
u32 therm_trip_mode_mask;
u32 therm_trip_en_shift;
- u32 buf_slope_sel_shift;
- u32 buf_slope_sel_mask;
- u32 calib_mode_shift;
- u32 calib_mode_mask;
- u32 therm_trip_tq_en_shift;
- u32 core_en_shift;
u32 tmu_status;
u32 tmu_cur_temp;
- u32 tmu_cur_temp_shift;
u32 threshold_temp;
u32 threshold_th0;
- u32 threshold_th0_l0_shift;
- u32 threshold_th0_l1_shift;
- u32 threshold_th0_l2_shift;
- u32 threshold_th0_l3_shift;
-
u32 threshold_th1;
- u32 threshold_th1_l0_shift;
- u32 threshold_th1_l1_shift;
- u32 threshold_th1_l2_shift;
- u32 threshold_th1_l3_shift;
-
u32 threshold_th2;
- u32 threshold_th2_l0_shift;
-
- u32 threshold_th3;
u32 threshold_th3_l0_shift;
u32 tmu_inten;
u32 inten_rise2_shift;
u32 inten_rise3_shift;
u32 inten_fall0_shift;
- u32 inten_fall1_shift;
- u32 inten_fall2_shift;
- u32 inten_fall3_shift;
u32 tmu_intstat;
u32 tmu_intclear;
- u32 intclr_fall_shift;
- u32 intclr_rise_shift;
- u32 intclr_fall_mask;
- u32 intclr_rise_mask;
u32 emul_con;
u32 emul_temp_shift;
u32 emul_time_shift;
- u32 emul_time_mask;
u32 tmu_irqstatus;
u32 tmu_pmin;
* 1 = enable trigger_level[] interrupt,
* 0 = disable trigger_level[] interrupt
* @max_trigger_level: max trigger level supported by the TMU
+ * @non_hw_trigger_levels: number of defined non-hardware trigger levels
* @gain: gain of amplifier in the positive-TC generator block
- * 0 <= gain <= 15
+ * 0 < gain <= 15
* @reference_voltage: reference voltage of amplifier
* in the positive-TC generator block
- * 0 <= reference_voltage <= 31
+ * 0 < reference_voltage <= 31
* @noise_cancel_mode: noise cancellation mode
* 000, 100, 101, 110 and 111 can be different modes
* @type: determines the type of SOC
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
* @test_mux; information if SoC supports test MUX
+ * @triminfo_reload: reload value to read TRIMINFO register
* @cal_type: calibration type for temperature
- * @cal_mode: calibration mode for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
* applicable to only some of the trigger levels.
enum trigger_type trigger_type[MAX_TRIP_COUNT];
bool trigger_enable[MAX_TRIP_COUNT];
u8 max_trigger_level;
+ u8 non_hw_trigger_levels;
u8 gain;
u8 reference_voltage;
u8 noise_cancel_mode;
u8 second_point_trim;
u8 default_temp_offset;
u8 test_mux;
+ u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
- enum calibration_mode cal_mode;
enum soc_type type;
struct freq_clip_table freq_tab[4];
unsigned int freq_tab_count;
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
.trigger_type[1] = THROTTLE_ACTIVE,
.trigger_type[2] = SW_TRIP,
.max_trigger_level = 4,
+ .non_hw_trigger_levels = 3,
.gain = 15,
.reference_voltage = 7,
.cal_type = TYPE_ONE_POINT_TRIMMING,
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
+ .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 2,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS3250_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
+ .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos3250_tmu_registers, \
- .features = (TMU_SUPPORT_EMULATION | \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
#endif
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
- .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
- .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 1,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK,
.emul_con = EXYNOS5260_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5260_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
#define EXYNOS5260_TMU_DATA \
__EXYNOS5260_TMU_DATA \
.type = SOC_ARCH_EXYNOS5260, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
.tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5420_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
#define EXYNOS5420_TMU_DATA \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5250, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
#define EXYNOS5420_TMU_DATA_SHARED \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \
+ TMU_SUPPORT_ADDRESS_MULTIPLE)
struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
.tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
- .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
- .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.trigger_type[0] = SW_TRIP, \
.trigger_type[4] = HW_TRIP, \
.max_trigger_level = 5, \
+ .non_hw_trigger_levels = 1, \
.gain = 5, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
- .cal_mode = 0, \
.efuse_value = 0x5b2d, \
.min_efuse_value = 16, \
.max_efuse_value = 76, \
#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
#define EXYNOS_TMU_CORE_EN_SHIFT 0
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1 0x10
+
/* Exynos4210 specific registers */
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
-#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
-#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
-#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
-#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
-
-#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
-#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
-#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
-#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
-#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
-#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
-
-/* Exynos5250 and Exynos4412 specific registers */
-#define EXYNOS_TMU_TRIMINFO_CON 0x14
+
+/* Exynos5250, Exynos4412, Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2 0x14
#define EXYNOS_THD_TEMP_RISE 0x50
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
-#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
-#define EXYNOS_TMU_RISE_INT_MASK 0x111
-#define EXYNOS_TMU_RISE_INT_SHIFT 0
-#define EXYNOS_TMU_FALL_INT_MASK 0x111
-#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
-#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
-#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
-#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16
-#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
-#define EXYNOS_TMU_CALIB_MODE_SHIFT 4
-#define EXYNOS_TMU_CALIB_MODE_MASK 0x3
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
-#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
-#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
-#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_MASK 0xffff
#define EXYNOS_MAX_TRIGGER_PER_REG 4
/* Exynos5260 specific */
-#define EXYNOS_TMU_REG_CONTROL1 0x24
#define EXYNOS5260_TMU_REG_INTEN 0xC0
#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
-#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111
-#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16)
-#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111
-#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111
#define EXYNOS5260_EMUL_CON 0x100
/* Exynos4412 specific */
#define EXYNOS5440_TMU_S0_7_TH0 0x110
#define EXYNOS5440_TMU_S0_7_TH1 0x130
#define EXYNOS5440_TMU_S0_7_TH2 0x150
-#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
#define EXYNOS5440_TMU_S0_7_IRQ 0x230
/* exynos5440 common registers */
#define EXYNOS5440_TMU_IRQ_STATUS 0x000
#define EXYNOS5440_TMU_PMIN 0x004
-#define EXYNOS5440_TMU_TEMP 0x008
-#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
-#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
-#define EXYNOS5440_TMU_FALL_INT_MASK 0xf
#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
-#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
-#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
-#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
-#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0
-#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8
-#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16
-#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
thermal_zone_device_update(tz);
- if (!result)
- return tz;
+ return tz;
unregister:
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+ mask |= POLLHUP;
if (input_available_p(tty, 1))
mask |= POLLIN | POLLRDNORM;
+ else if (mask & POLLHUP) {
+ tty_flush_to_ldisc(tty);
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ }
if (tty->packet && tty->link->ctrl_status)
mask |= POLLPRI | POLLIN | POLLRDNORM;
- if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
- mask |= POLLHUP;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
/* Set to highest baudrate supported */
if (baud >= 1152000)
baud = 921600;
- quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud);
+ quot = (port->uartclk / (256 * baud)) + 1;
}
/*
if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
return -EBUSY;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL)
return -ENOMEM;
* The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
* Die! Die! Die!
*/
- if (baud == 38400)
+ if (try == 0 && baud == 38400)
baud = altbaud;
/*
int pty_master, tty_closing, o_tty_closing, do_sleep;
int idx;
char buf[64];
+ long timeout = 0;
+ int once = 1;
if (tty_paranoia_check(tty, inode, __func__))
return 0;
if (!do_sleep)
break;
- printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
- __func__, tty_name(tty, buf));
+ if (once) {
+ once = 0;
+ printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
+ __func__, tty_name(tty, buf));
+ }
tty_unlock_pair(tty, o_tty);
mutex_unlock(&tty_mutex);
- schedule();
+ schedule_timeout_killable(timeout);
+ if (timeout < 120 * HZ)
+ timeout = 2 * timeout + 1;
+ else
+ timeout = MAX_SCHEDULE_TIMEOUT;
}
/*
/* Save original vc_unipagdir_loc in case we allocate a new one */
p = *vc->vc_uni_pagedir_loc;
+
+ if (!p) {
+ err = -EINVAL;
+
+ goto out_unlock;
+ }
if (p->refcount > 1) {
int j, k;
set_inverse_transl(vc, p, i); /* Update inverse translations */
set_inverse_trans_unicode(vc, p);
+out_unlock:
console_unlock();
return err;
}
ci_role_destroy(ci);
ci_hdrc_enter_lpm(ci, true);
usb_phy_shutdown(ci->transceiver);
- kfree(ci->hw_bank.regmap);
return 0;
}
static DEFINE_MUTEX(acm_table_lock);
+static void acm_tty_set_termios(struct tty_struct *tty,
+ struct ktermios *termios_old);
+
/*
* acm_table accessors
*/
/* devices aren't required to support these requests.
* the cdc acm descriptor tells whether they do...
*/
-#define acm_set_control(acm, control) \
- acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0)
+static inline int acm_set_control(struct acm *acm, int control)
+{
+ if (acm->quirks & QUIRK_CONTROL_LINE_STATE)
+ return -EOPNOTSUPP;
+
+ return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+ control, NULL, 0);
+}
+
#define acm_set_line(acm, line) \
acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line))
#define acm_send_break(acm, ms) \
goto error_submit_urb;
}
+ acm_tty_set_termios(tty, NULL);
+
/*
* Unthrottle device in case the TTY was closed while throttled.
*/
/* FIXME: Needs to clear unsupported bits in the termios */
acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
- if (!newline.dwDTERate) {
+ if (C_BAUD(tty) == B0) {
newline.dwDTERate = acm->line.dwDTERate;
newctrl &= ~ACM_CTRL_DTR;
- } else
+ } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
newctrl |= ACM_CTRL_DTR;
+ }
if (newctrl != acm->ctrlout)
acm_set_control(acm, acm->ctrlout = newctrl);
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
init_usb_anchor(&acm->delayed);
+ acm->quirks = quirks;
buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
+ .driver_info = QUIRK_CONTROL_LINE_STATE, },
+ { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
/* Motorola H24 HSPA module: */
unsigned int throttle_req:1; /* throttle requested */
u8 bInterval;
struct usb_anchor delayed; /* writes queued for a device about to be woken */
+ unsigned long quirks;
};
#define CDC_DATA_INTERFACE_TYPE 0x0a
#define NOT_A_MODEM BIT(3)
#define NO_DATA_INTERFACE BIT(4)
#define IGNORE_DEVICE BIT(5)
+#define QUIRK_CONTROL_LINE_STATE BIT(6)
return -EINVAL;
if (dev->speed != USB_SPEED_SUPER)
return -EINVAL;
+ if (dev->state < USB_STATE_CONFIGURED)
+ return -ENODEV;
for (i = 0; i < num_eps; i++) {
/* Streams only apply to bulk endpoints. */
if (retval)
goto fail;
- if (hcd->usb_phy && !hdev->parent)
- usb_phy_notify_connect(hcd->usb_phy, udev->speed);
-
/*
* Some superspeed devices have finished the link training process
* and attached to a superspeed hub port, but the device descriptor
/* Disconnect any existing devices under this port */
if (udev) {
- if (hcd->usb_phy && !hdev->parent &&
- !(portstatus & USB_PORT_STAT_CONNECTION))
+ if (hcd->usb_phy && !hdev->parent)
usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
usb_disconnect(&port_dev->child);
}
port_dev->child = NULL;
spin_unlock_irq(&device_state_lock);
mutex_unlock(&usb_port_peer_mutex);
+ } else {
+ if (hcd->usb_phy && !hdev->parent)
+ usb_phy_notify_connect(hcd->usb_phy,
+ udev->speed);
}
}
{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
+ { USB_DEVICE(0x04f3, 0x009b), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
+ { USB_DEVICE(0x04f3, 0x010c), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
+ { USB_DEVICE(0x04f3, 0x016f), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
unsigned port_suspend_change:1;
unsigned port_over_current_change:1;
unsigned port_l1_change:1;
- unsigned reserved:26;
+ unsigned reserved:25;
} b;
} flags;
u32 usb_status = readl(hsotg->regs + GOTGCTL);
- dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+ dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
readl(hsotg->regs + GNPTXSTS));
hs_ep->fifo_size = val;
break;
}
- if (i == 8)
- return -ENOMEM;
+ if (i == 8) {
+ ret = -ENOMEM;
+ goto error;
+ }
}
/* for non control endpoints, set PID to D0 */
/* enable the endpoint interrupt */
s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+error:
spin_unlock_irqrestore(&hsotg->lock, flags);
return ret;
}
spin_lock_irqsave(&hsotg->lock, flags);
- if (!driver)
- hsotg->driver = NULL;
-
+ hsotg->driver = NULL;
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
spin_unlock_irqrestore(&hsotg->lock, flags);
s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
/* disable power and clock */
+ s3c_hsotg_phy_disable(hsotg);
ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
goto err_ep_mem;
}
- s3c_hsotg_phy_disable(hsotg);
-
ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
if (ret)
goto err_ep_mem;
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
- dwc3_omap_write_irqmisc_set(omap, 0x00);
+ dwc3_omap_disable_irqs(omap);
return 0;
}
static void dwc3_omap_complete(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
- u32 reg;
- reg = (USBOTGSS_IRQMISC_OEVT |
- USBOTGSS_IRQMISC_DRVVBUS_RISE |
- USBOTGSS_IRQMISC_CHRGVBUS_RISE |
- USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
- USBOTGSS_IRQMISC_IDPULLUP_RISE |
- USBOTGSS_IRQMISC_DRVVBUS_FALL |
- USBOTGSS_IRQMISC_CHRGVBUS_FALL |
- USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
- USBOTGSS_IRQMISC_IDPULLUP_FALL);
-
- dwc3_omap_write_irqmisc_set(omap, reg);
+ dwc3_omap_enable_irqs(omap);
}
static int dwc3_omap_suspend(struct device *dev)
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
+#define PCI_DEVICE_ID_INTEL_BSW 0x22B7
struct dwc3_pci {
struct device *dev;
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
{ } /* Terminating Entry */
/* stall is always issued on EP0 */
dep = dwc->eps[0];
- __dwc3_gadget_ep_set_halt(dep, 1);
+ __dwc3_gadget_ep_set_halt(dep, 1, false);
dep->flags = DWC3_EP_ENABLED;
dwc->delayed_status = false;
dwc3_ep0_out_start(dwc);
}
-int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
{
struct dwc3_ep *dep = to_dwc3_ep(ep);
struct dwc3 *dwc = dep->dwc;
return 0;
}
+int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+ struct dwc3_ep *dep = to_dwc3_ep(ep);
+ struct dwc3 *dwc = dep->dwc;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ ret = __dwc3_gadget_ep0_set_halt(ep, value);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return ret;
+}
+
void dwc3_ep0_out_start(struct dwc3 *dwc)
{
int ret;
return -EINVAL;
if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
break;
- ret = __dwc3_gadget_ep_set_halt(dep, set);
+ ret = __dwc3_gadget_ep_set_halt(dep, set, true);
if (ret)
return -EINVAL;
break;
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
- r = next_request(&ep0->request_list);
- ur = &r->request;
-
trb = dwc->ep0_trb;
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
return;
}
+ r = next_request(&ep0->request_list);
+ if (!r)
+ return;
+
+ ur = &r->request;
+
length = trb->size & DWC3_TRB_SIZE_MASK;
if (dwc->ep0_bounced) {
dwc3_ep0_stall_and_restart(dwc);
} else {
- /*
- * handle the case where we have to send a zero packet. This
- * seems to be case when req.length > maxpacket. Could it be?
- */
- if (r)
- dwc3_gadget_giveback(ep0, r, 0);
+ dwc3_gadget_giveback(ep0, r, 0);
+
+ if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
+ ur->length && ur->zero) {
+ int ret;
+
+ dwc->ep0_next_event = DWC3_EP0_COMPLETE;
+
+ ret = dwc3_ep0_start_trans(dwc, epnum,
+ dwc->ctrl_req_addr, 0,
+ DWC3_TRBCTL_CONTROL_DATA);
+ WARN_ON(ret < 0);
+ }
}
}
if (!usb_endpoint_xfer_isoc(desc))
return 0;
- memset(&trb_link, 0, sizeof(trb_link));
-
/* Link TRB for ISOC. The HWO bit is never reset */
trb_st_hw = &dep->trb_pool[0];
trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
+ memset(trb_link, 0, sizeof(*trb_link));
trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
/* make sure HW endpoint isn't stalled */
if (dep->flags & DWC3_EP_STALL)
- __dwc3_gadget_ep_set_halt(dep, 0);
+ __dwc3_gadget_ep_set_halt(dep, 0, false);
reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
reg &= ~DWC3_DALEPENA_EP(dep->number);
return ret;
}
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3 *dwc = dep->dwc;
int ret;
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
+ return -EINVAL;
+ }
+
memset(¶ms, 0x00, sizeof(params));
if (value) {
+ if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
+ (!list_empty(&dep->req_queued) ||
+ !list_empty(&dep->request_list)))) {
+ dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
+ dep->name);
+ return -EAGAIN;
+ }
+
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_SETSTALL, ¶ms);
if (ret)
int ret;
spin_lock_irqsave(&dwc->lock, flags);
-
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
- ret = -EINVAL;
- goto out;
- }
-
- ret = __dwc3_gadget_ep_set_halt(dep, value);
-out:
+ ret = __dwc3_gadget_ep_set_halt(dep, value, false);
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
struct dwc3_ep *dep = to_dwc3_ep(ep);
struct dwc3 *dwc = dep->dwc;
unsigned long flags;
+ int ret;
spin_lock_irqsave(&dwc->lock, flags);
dep->flags |= DWC3_EP_WEDGE;
- spin_unlock_irqrestore(&dwc->lock, flags);
if (dep->number == 0 || dep->number == 1)
- return dwc3_gadget_ep0_set_halt(ep, 1);
+ ret = __dwc3_gadget_ep0_set_halt(ep, 1);
else
- return dwc3_gadget_ep_set_halt(ep, 1);
+ ret = __dwc3_gadget_ep_set_halt(dep, 1, false);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return ret;
}
/* -------------------------------------------------------------------------- */
void dwc3_ep0_interrupt(struct dwc3 *dwc,
const struct dwc3_event_depevt *event);
void dwc3_ep0_out_start(struct dwc3 *dwc);
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
/**
* dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
TP_PROTO(struct usb_ctrlrequest *ctrl),
TP_ARGS(ctrl),
TP_STRUCT__entry(
- __field(struct usb_ctrlrequest *, ctrl)
+ __field(__u8, bRequestType)
+ __field(__u8, bRequest)
+ __field(__le16, wValue)
+ __field(__le16, wIndex)
+ __field(__le16, wLength)
),
TP_fast_assign(
- __entry->ctrl = ctrl;
+ __entry->bRequestType = ctrl->bRequestType;
+ __entry->bRequest = ctrl->bRequest;
+ __entry->wValue = ctrl->wValue;
+ __entry->wIndex = ctrl->wIndex;
+ __entry->wLength = ctrl->wLength;
),
TP_printk("bRequestType %02x bRequest %02x wValue %04x wIndex %04x wLength %d",
- __entry->ctrl->bRequestType, __entry->ctrl->bRequest,
- le16_to_cpu(__entry->ctrl->wValue), le16_to_cpu(__entry->ctrl->wIndex),
- le16_to_cpu(__entry->ctrl->wLength)
+ __entry->bRequestType, __entry->bRequest,
+ le16_to_cpu(__entry->wValue), le16_to_cpu(__entry->wIndex),
+ le16_to_cpu(__entry->wLength)
)
);
TP_PROTO(struct dwc3_request *req),
TP_ARGS(req),
TP_STRUCT__entry(
+ __dynamic_array(char, name, DWC3_MSG_MAX)
__field(struct dwc3_request *, req)
+ __field(unsigned, actual)
+ __field(unsigned, length)
+ __field(int, status)
),
TP_fast_assign(
+ snprintf(__get_str(name), DWC3_MSG_MAX, "%s", req->dep->name);
__entry->req = req;
+ __entry->actual = req->request.actual;
+ __entry->length = req->request.length;
+ __entry->status = req->request.status;
),
TP_printk("%s: req %p length %u/%u ==> %d",
- __entry->req->dep->name, __entry->req,
- __entry->req->request.actual, __entry->req->request.length,
- __entry->req->request.status
+ __get_str(name), __entry->req, __entry->actual, __entry->length,
+ __entry->status
)
);
struct dwc3_gadget_ep_cmd_params *params),
TP_ARGS(dep, cmd, params),
TP_STRUCT__entry(
- __field(struct dwc3_ep *, dep)
+ __dynamic_array(char, name, DWC3_MSG_MAX)
__field(unsigned int, cmd)
__field(struct dwc3_gadget_ep_cmd_params *, params)
),
TP_fast_assign(
- __entry->dep = dep;
+ snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
__entry->cmd = cmd;
__entry->params = params;
),
TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x\n",
- __entry->dep->name, dwc3_gadget_ep_cmd_string(__entry->cmd),
+ __get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd),
__entry->cmd, __entry->params->param0,
__entry->params->param1, __entry->params->param2
)
TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
TP_ARGS(dep, trb),
TP_STRUCT__entry(
- __field(struct dwc3_ep *, dep)
+ __dynamic_array(char, name, DWC3_MSG_MAX)
__field(struct dwc3_trb *, trb)
+ __field(u32, bpl)
+ __field(u32, bph)
+ __field(u32, size)
+ __field(u32, ctrl)
),
TP_fast_assign(
- __entry->dep = dep;
+ snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
__entry->trb = trb;
+ __entry->bpl = trb->bpl;
+ __entry->bph = trb->bph;
+ __entry->size = trb->size;
+ __entry->ctrl = trb->ctrl;
),
TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x\n",
- __entry->dep->name, __entry->trb, __entry->trb->bph,
- __entry->trb->bpl, __entry->trb->size, __entry->trb->ctrl
+ __get_str(name), __entry->trb, __entry->bph, __entry->bpl,
+ __entry->size, __entry->ctrl
)
);
usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
- usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+ usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
/*
* The Superspeed USB Capability descriptor shall be implemented by all
dev_vdbg(&cdev->gadget->dev,
"reset acm control interface %d\n", intf);
usb_ep_disable(acm->notify);
- } else {
- dev_vdbg(&cdev->gadget->dev,
- "init acm ctrl interface %d\n", intf);
+ }
+
+ if (!acm->notify->desc)
if (config_ep_by_speed(cdev->gadget, f, acm->notify))
return -EINVAL;
- }
+
usb_ep_enable(acm->notify);
acm->notify->driver_data = acm;
return 0;
fail:
- usb_free_all_descriptors(f);
if (eem->port.out_ep)
eem->port.out_ep->driver_data = NULL;
if (eem->port.in_ep)
if (io_data->read && ret > 0) {
int i;
size_t pos = 0;
+
+ /*
+ * Since req->length may be bigger than io_data->len (after
+ * being rounded up to maxpacketsize), we may end up with more
+ * data then user space has space for.
+ */
+ ret = min_t(int, ret, io_data->len);
+
use_mm(io_data->mm);
for (i = 0; i < io_data->nr_segs; i++) {
+ size_t len = min_t(size_t, ret - pos,
+ io_data->iovec[i].iov_len);
+ if (!len)
+ break;
if (unlikely(copy_to_user(io_data->iovec[i].iov_base,
- &io_data->buf[pos],
- io_data->iovec[i].iov_len))) {
+ &io_data->buf[pos], len))) {
ret = -EFAULT;
break;
}
- pos += io_data->iovec[i].iov_len;
+ pos += len;
}
unuse_mm(io_data->mm);
}
struct ffs_epfile *epfile = file->private_data;
struct ffs_ep *ep;
char *data = NULL;
- ssize_t ret, data_len;
+ ssize_t ret, data_len = -EINVAL;
int halt;
/* Are we still active? */
/* Fire the request */
struct usb_request *req;
+ /*
+ * Sanity Check: even though data_len can't be used
+ * uninitialized at the time I write this comment, some
+ * compilers complain about this situation.
+ * In order to keep the code clean from warnings, data_len is
+ * being initialized to -EINVAL during its declaration, which
+ * means we can't rely on compiler anymore to warn no future
+ * changes won't result in data_len being used uninitialized.
+ * For such reason, we're adding this redundant sanity check
+ * here.
+ */
+ if (unlikely(data_len == -EINVAL)) {
+ WARN(1, "%s: data_len == -EINVAL\n", __func__);
+ ret = -EINVAL;
+ goto error_lock;
+ }
+
if (io_data->aio) {
req = usb_ep_alloc_request(ep->ep, GFP_KERNEL);
if (unlikely(!req))
goto error_lock;
req->buf = data;
- req->length = io_data->len;
+ req->length = data_len;
io_data->buf = data;
io_data->ep = ep->ep;
req = ep->req;
req->buf = data;
- req->length = io_data->len;
+ req->length = data_len;
req->context = &done;
req->complete = ffs_epfile_io_complete;
func->conf = c;
func->gadget = c->cdev->gadget;
- ffs_data_get(func->ffs);
-
/*
* in drivers/usb/gadget/configfs.c:configfs_composite_bind()
* configurations are bound in sequence with list_for_each_entry,
dev = MKDEV(major, hidg->minor);
status = cdev_add(&hidg->cdev, dev, 1);
if (status)
- goto fail;
+ goto fail_free_descs;
device_create(hidg_class, NULL, dev, NULL, "%s%d", "hidg", hidg->minor);
return 0;
+fail_free_descs:
+ usb_free_all_descriptors(f);
fail:
ERROR(f->config->cdev, "hidg_bind FAILED\n");
if (hidg->req != NULL) {
usb_ep_free_request(hidg->in_ep, hidg->req);
}
- usb_free_all_descriptors(f);
return status;
}
case 0: /* normal completion? */
if (ep == loop->out_ep) {
- /* loop this OUT packet back IN to the host */
req->zero = (req->actual < req->length);
req->length = req->actual;
- status = usb_ep_queue(loop->in_ep, req, GFP_ATOMIC);
- if (status == 0)
- return;
-
- /* "should never get here" */
- ERROR(cdev, "can't loop %s to %s: %d\n",
- ep->name, loop->in_ep->name,
- status);
}
/* queue the buffer for some later OUT packet */
req->length = buflen;
- status = usb_ep_queue(loop->out_ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status == 0)
return;
return alloc_ep_req(ep, len, buflen);
}
-static int
-enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+static int enable_endpoint(struct usb_composite_dev *cdev, struct f_loopback *loop,
+ struct usb_ep *ep)
{
- int result = 0;
- struct usb_ep *ep;
struct usb_request *req;
unsigned i;
+ int result;
- /* one endpoint writes data back IN to the host */
- ep = loop->in_ep;
+ /*
+ * one endpoint writes data back IN to the host while another endpoint
+ * just reads OUT packets
+ */
result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
if (result)
- return result;
+ goto fail0;
result = usb_ep_enable(ep);
if (result < 0)
- return result;
- ep->driver_data = loop;
-
- /* one endpoint just reads OUT packets */
- ep = loop->out_ep;
- result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
- if (result)
goto fail0;
-
- result = usb_ep_enable(ep);
- if (result < 0) {
-fail0:
- ep = loop->in_ep;
- usb_ep_disable(ep);
- ep->driver_data = NULL;
- return result;
- }
ep->driver_data = loop;
- /* allocate a bunch of read buffers and queue them all at once.
+ /*
+ * allocate a bunch of read buffers and queue them all at once.
* we buffer at most 'qlen' transfers; fewer if any need more
* than 'buflen' bytes each.
*/
for (i = 0; i < qlen && result == 0; i++) {
req = lb_alloc_ep_req(ep, 0);
- if (req) {
- req->complete = loopback_complete;
- result = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (result)
- ERROR(cdev, "%s queue req --> %d\n",
- ep->name, result);
- } else {
- usb_ep_disable(ep);
- ep->driver_data = NULL;
- result = -ENOMEM;
- goto fail0;
+ if (!req)
+ goto fail1;
+
+ req->complete = loopback_complete;
+ result = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (result) {
+ ERROR(cdev, "%s queue req --> %d\n",
+ ep->name, result);
+ goto fail1;
}
}
+ return 0;
+
+fail1:
+ usb_ep_disable(ep);
+
+fail0:
+ return result;
+}
+
+static int
+enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+{
+ int result = 0;
+
+ result = enable_endpoint(cdev, loop, loop->in_ep);
+ if (result)
+ return result;
+
+ result = enable_endpoint(cdev, loop, loop->out_ep);
+ if (result)
+ return result;
+
DBG(cdev, "%s enabled\n", loop->function.name);
return result;
}
return 0;
fail:
- usb_free_all_descriptors(f);
if (ncm->notify_req) {
kfree(ncm->notify_req->buf);
usb_ep_free_request(ncm->notify, ncm->notify_req);
struct gserial port;
u8 ctrl_id;
u8 data_id;
+ u8 cur_alt;
u8 port_num;
u8 can_activate;
};
} else
goto fail;
+ obex->cur_alt = alt;
+
return 0;
fail:
{
struct f_obex *obex = func_to_obex(f);
- if (intf == obex->ctrl_id)
- return 0;
-
- return obex->port.in->driver_data ? 1 : 0;
+ return obex->cur_alt;
}
static void obex_disable(struct usb_function *f)
return 0;
fail:
- usb_free_all_descriptors(f);
/* we might as well release our claims on endpoints */
if (obex->port.out)
obex->port.out->driver_data = NULL;
err_req:
for (i = 0; i < phonet_rxq_size && fp->out_reqv[i]; i++)
usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
-err:
usb_free_all_descriptors(f);
+err:
if (fp->out_ep)
fp->out_ep->driver_data = NULL;
if (fp->in_ep)
if (rndis->manufacturer && rndis->vendorID &&
rndis_set_param_vendor(rndis->config, rndis->vendorID,
- rndis->manufacturer))
- goto fail;
+ rndis->manufacturer)) {
+ status = -EINVAL;
+ goto fail_free_descs;
+ }
/* NOTE: all that is done without knowing or caring about
* the network link ... which is unavailable to this code
rndis->notify->name);
return 0;
+fail_free_descs:
+ usb_free_all_descriptors(f);
fail:
kfree(f->os_desc_table);
f->os_desc_n = 0;
- usb_free_all_descriptors(f);
if (rndis->notify_req) {
kfree(rndis->notify_req->buf);
return 0;
fail:
- usb_free_all_descriptors(f);
/* we might as well release our claims on endpoints */
if (geth->port.out_ep)
geth->port.out_ep->driver_data = NULL;
return 0;
}
+static void snd_uac2_release(struct device *dev)
+{
+ dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
+}
+
static int alsa_uac2_init(struct audio_dev *agdev)
{
struct snd_uac2_chip *uac2 = &agdev->uac2;
uac2->pdev.id = 0;
uac2->pdev.name = uac2_name;
+ uac2->pdev.dev.release = snd_uac2_release;
/* Register snd_uac2 driver */
err = platform_driver_register(&uac2->pdrv);
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1023),
.bInterval = 1,
};
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1023),
.bInterval = 1,
};
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
struct snd_uac2_chip *uac2 = prm->uac2;
int i;
+ if (!prm->ep_enabled)
+ return;
+
prm->ep_enabled = false;
for (i = 0; i < USB_XFERS; i++) {
prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
if (!prm->rbuf) {
prm->max_psize = 0;
- goto err;
+ goto err_free_descs;
}
prm = &agdev->uac2.p_prm;
prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
if (!prm->rbuf) {
prm->max_psize = 0;
- goto err;
+ goto err_free_descs;
}
ret = alsa_uac2_init(agdev);
if (ret)
- goto err;
+ goto err_free_descs;
return 0;
+
+err_free_descs:
+ usb_free_all_descriptors(fn);
err:
kfree(agdev->uac2.p_prm.rbuf);
kfree(agdev->uac2.c_prm.rbuf);
- usb_free_all_descriptors(fn);
if (agdev->in_ep)
agdev->in_ep->driver_data = NULL;
if (agdev->out_ep)
else if (interface != uvc->streaming_intf)
return -EINVAL;
else
- return uvc->state == UVC_STATE_STREAMING ? 1 : 0;
+ return uvc->video.ep->driver_data ? 1 : 0;
}
static int
uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
{
struct uvc_device *uvc = to_uvc(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
struct v4l2_event v4l2_event;
struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
int ret;
- INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
+ INFO(cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
if (interface == uvc->control_intf) {
if (alt)
return -EINVAL;
+ if (uvc->control_ep->driver_data) {
+ INFO(cdev, "reset UVC Control\n");
+ usb_ep_disable(uvc->control_ep);
+ uvc->control_ep->driver_data = NULL;
+ }
+
+ if (!uvc->control_ep->desc)
+ if (config_ep_by_speed(cdev->gadget, f, uvc->control_ep))
+ return -EINVAL;
+
+ usb_ep_enable(uvc->control_ep);
+ uvc->control_ep->driver_data = uvc;
+
if (uvc->state == UVC_STATE_DISCONNECTED) {
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_CONNECT;
- uvc_event->speed = f->config->cdev->gadget->speed;
+ uvc_event->speed = cdev->gadget->speed;
v4l2_event_queue(uvc->vdev, &v4l2_event);
uvc->state = UVC_STATE_CONNECTED;
if (uvc->state != UVC_STATE_STREAMING)
return 0;
- if (uvc->video.ep)
+ if (uvc->video.ep) {
usb_ep_disable(uvc->video.ep);
+ uvc->video.ep->driver_data = NULL;
+ }
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_STREAMOFF;
if (uvc->state != UVC_STATE_CONNECTED)
return 0;
- if (uvc->video.ep) {
- ret = config_ep_by_speed(f->config->cdev->gadget,
- &(uvc->func), uvc->video.ep);
- if (ret)
- return ret;
- usb_ep_enable(uvc->video.ep);
+ if (!uvc->video.ep)
+ return -EINVAL;
+
+ if (uvc->video.ep->driver_data) {
+ INFO(cdev, "reset UVC\n");
+ usb_ep_disable(uvc->video.ep);
+ uvc->video.ep->driver_data = NULL;
}
+ ret = config_ep_by_speed(f->config->cdev->gadget,
+ &(uvc->func), uvc->video.ep);
+ if (ret)
+ return ret;
+ usb_ep_enable(uvc->video.ep);
+ uvc->video.ep->driver_data = uvc;
+
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_STREAMON;
v4l2_event_queue(uvc->vdev, &v4l2_event);
v4l2_event_queue(uvc->vdev, &v4l2_event);
uvc->state = UVC_STATE_DISCONNECTED;
+
+ if (uvc->video.ep->driver_data) {
+ usb_ep_disable(uvc->video.ep);
+ uvc->video.ep->driver_data = NULL;
+ }
+
+ if (uvc->control_ep->driver_data) {
+ usb_ep_disable(uvc->control_ep);
+ uvc->control_ep->driver_data = NULL;
+ }
}
/* --------------------------------------------------------------------------
if (!enable) {
for (i = 0; i < UVC_NUM_REQUESTS; ++i)
- usb_ep_dequeue(video->ep, video->req[i]);
+ if (video->req[i])
+ usb_ep_dequeue(video->ep, video->req[i]);
uvc_video_free_requests(video);
uvcg_queue_enable(&video->queue, 0);
config USB_GADGET_XILINX
tristate "Xilinx USB Driver"
+ depends on HAS_DMA
depends on OF || COMPILE_TEST
help
USB peripheral controller driver for Xilinx USB2 device.
{
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
+ if (!udc->driver) {
+ dev_err(dev, "soft-connect without a gadget driver\n");
+ return -EOPNOTSUPP;
+ }
+
if (sysfs_streq(buf, "connect")) {
usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100)
dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
- le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8,
+ (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8,
le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff);
result = 0;
error:
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
xhci->quirks |= XHCI_AVOID_BEI;
}
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) {
- /* Workaround for occasional spurious wakeups from S5 (or
- * any other sleep) on Haswell machines with LPT and LPT-LP
- * with the new Intel BIOS
- */
- /* Limit the quirk to only known vendors, as this triggers
- * yet another BIOS bug on some other machines
- * https://bugzilla.kernel.org/show_bug.cgi?id=66171
- */
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
- xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
- }
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+ pdev->device == 0x1042)
+ xhci->quirks |= XHCI_BROKEN_STREAMS;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
}
}
- if (!list_empty(&controller->early_tx_list)) {
+ if (!list_empty(&controller->early_tx_list) &&
+ !hrtimer_is_queued(&controller->early_tx)) {
ret = HRTIMER_RESTART;
hrtimer_forward_now(&controller->early_tx,
ktime_set(0, 20 * NSEC_PER_USEC));
struct dsps_glue *glue = dev_get_drvdata(dev);
const struct dsps_musb_wrapper *wrp = glue->wrp;
struct musb *musb = platform_get_drvdata(glue->musb);
- void __iomem *mbase = musb->ctrl_base;
+ void __iomem *mbase;
del_timer_sync(&glue->timer);
+
+ if (!musb)
+ /* This can happen if the musb device is in -EPROBE_DEFER */
+ return 0;
+
+ mbase = musb->ctrl_base;
glue->context.control = dsps_readl(mbase, wrp->control);
glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
struct dsps_glue *glue = dev_get_drvdata(dev);
const struct dsps_musb_wrapper *wrp = glue->wrp;
struct musb *musb = platform_get_drvdata(glue->musb);
- void __iomem *mbase = musb->ctrl_base;
+ void __iomem *mbase;
+
+ if (!musb)
+ return 0;
+ mbase = musb->ctrl_base;
dsps_writel(mbase, wrp->control, glue->context.control);
dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
dsps_writel(mbase, wrp->mode, glue->context.mode);
dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
- setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
+ if (musb->xceiv->state == OTG_STATE_B_IDLE &&
+ musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+ mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
return 0;
}
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
* /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
*/
static const struct usb_device_id id_table_combined[] = {
+ { USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
/*** third-party PIDs (using FTDI_VID) ***/
+/*
+ * Certain versions of the official Windows FTDI driver reprogrammed
+ * counterfeit FTDI devices to PID 0. Support these devices anyway.
+ */
+#define FTDI_BRICK_PID 0x0000
+
#define FTDI_LUMEL_PD12_PID 0x6002
/*
* Xsens Technologies BV products (http://www.xsens.com).
*/
#define XSENS_VID 0x2639
-#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
+#define XSENS_AWINDA_STATION_PID 0x0101
+#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
+#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
+
+/* Xsens devices using FTDI VID */
#define XSENS_CONVERTER_0_PID 0xD388 /* Xsens USB converter */
#define XSENS_CONVERTER_1_PID 0xD389 /* Xsens Wireless Receiver */
#define XSENS_CONVERTER_2_PID 0xD38A
port->interrupt_out_urb->transfer_buffer_length = length;
priv->cur_pos = priv->cur_pos + length;
- result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
+ result = usb_submit_urb(port->interrupt_out_urb,
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
todo = priv->filled - priv->cur_pos;
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
result = usb_submit_urb(port->interrupt_in_urb,
- GFP_NOIO);
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
}
}
int result;
int dtr = 0;
int rts = 0;
- unsigned char *transfer_buffer;
- int transfer_buffer_length = 8;
/* FIXME: locking ? */
priv = usb_get_serial_port_data(port);
return -EINVAL;
}
- /* allocate memory for transfer buffer */
- transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
- if (!transfer_buffer)
- return -ENOMEM;
-
if (set & TIOCM_RTS)
rts = 1;
if (set & TIOCM_DTR)
KOBIL_TIMEOUT);
}
dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result);
- kfree(transfer_buffer);
return (result < 0) ? result : 0;
}
{
struct usb_serial_port *port = tty->driver_data;
struct kobil_private *priv = usb_get_serial_port_data(port);
- unsigned char *transfer_buffer;
- int transfer_buffer_length = 8;
int result;
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
switch (cmd) {
case TCFLSH:
- transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
- if (!transfer_buffer)
- return -ENOBUFS;
-
result = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
SUSBCRequest_Misc,
dev_dbg(&port->dev,
"%s - Send reset_all_queues (FLUSH) URB returns: %i\n",
__func__, result);
- kfree(transfer_buffer);
return (result < 0) ? -EIO: 0;
default:
return -ENOIOCTLCMD;
/* The connected devices do not have a bulk write endpoint,
* to transmit data to de barcode device the control endpoint is used */
- dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
if (!dr) {
count = -ENOMEM;
goto error_no_dr;
#define TELIT_PRODUCT_DE910_DUAL 0x1010
#define TELIT_PRODUCT_UE910_V2 0x1012
#define TELIT_PRODUCT_LE920 0x1200
+#define TELIT_PRODUCT_LE910 0x1201
/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
/* Haier products */
#define HAIER_VENDOR_ID 0x201e
+#define HAIER_PRODUCT_CE81B 0x10f8
#define HAIER_PRODUCT_CE100 0x2009
/* Cinterion (formerly Siemens) products */
.reserved = BIT(3) | BIT(4),
};
+static const struct option_blacklist_info telit_le910_blacklist = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(1) | BIT(2),
+};
+
static const struct option_blacklist_info telit_le920_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(5),
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
+ .driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) },
/* Pirelli */
{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
- 0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT);
+ 0x01, 0x0, us->iobuf, 0x1, 5 * HZ);
usb_stor_dbg(us, "-- result is %d\n", result);
return 0;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 0x01, 0x0, NULL, 0x0, 1000);
+ 0x01, 0x0, NULL, 0x0, 1 * HZ);
usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
return 0;
}
return 0;
}
+#ifdef CONFIG_PM
static int config_autodelink_before_power_down(struct us_data *us)
{
struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
}
}
}
+#endif
#ifdef CONFIG_REALTEK_AUTOPM
static void fw5895_set_mmc_wp(struct us_data *us)
*/
if (result == USB_STOR_XFER_LONG)
fake_sense = 1;
+
+ /*
+ * Sometimes a device will mistakenly skip the data phase
+ * and go directly to the status phase without sending a
+ * zero-length packet. If we get a 13-byte response here,
+ * check whether it really is a CSW.
+ */
+ if (result == USB_STOR_XFER_SHORT &&
+ srb->sc_data_direction == DMA_FROM_DEVICE &&
+ transfer_length - scsi_get_resid(srb) ==
+ US_BULK_CS_WRAP_LEN) {
+ struct scatterlist *sg = NULL;
+ unsigned int offset = 0;
+
+ if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+ US_BULK_CS_WRAP_LEN, srb, &sg,
+ &offset, FROM_XFER_BUF) ==
+ US_BULK_CS_WRAP_LEN &&
+ bcs->Signature ==
+ cpu_to_le32(US_BULK_CS_SIGN)) {
+ usb_stor_dbg(us, "Device skipped data phase\n");
+ scsi_set_resid(srb, transfer_length);
+ goto skipped_data_phase;
+ }
+ }
}
/* See flow chart on pg 15 of the Bulk Only Transport spec for
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
+ skipped_data_phase:
/* check bulk status */
residue = le32_to_cpu(bcs->Residue);
usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */
+UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999,
+ "Seagate",
+ "Backup Plus",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
"Seagate",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
+ "Seagate",
+ "Backup+ BK",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
"JMicron",
"ASM1051",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
+ "VIA",
+ "VL711",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
return 1;
while ((options = strsep(&this_opt, ",")) != NULL) {
- if (!strncmp(options, "font:", 5))
+ if (!strncmp(options, "font:", 5)) {
strlcpy(fontname, options + 5, sizeof(fontname));
+ continue;
+ }
if (!strncmp(options, "scrollback:", 11)) {
options += 11;
fbcon_softback_size = simple_strtoul(options, &options, 0);
if (*options == 'k' || *options == 'K') {
fbcon_softback_size *= 1024;
- options++;
}
- if (*options != ',')
- return 1;
- options++;
- } else
- return 1;
+ }
+ continue;
}
if (!strncmp(options, "map:", 4)) {
fbcon_map_override();
}
-
- return 1;
+ continue;
}
if (!strncmp(options, "vc:", 3)) {
if (*options++ == '-')
last_fb_vc = simple_strtoul(options, &options, 10) - 1;
fbcon_is_default = 0;
- }
+ continue;
+ }
if (!strncmp(options, "rotate:", 7)) {
options += 7;
initial_rotation = simple_strtoul(options, &options, 0);
if (initial_rotation > 3)
initial_rotation = 0;
+ continue;
}
}
return 1;
static int cursor_size_lastto;
static u32 vgacon_xres;
static u32 vgacon_yres;
-static struct vgastate state;
+static struct vgastate vgastate;
#define BLANK 0x0020
vga_video_num_lines = screen_info.orig_video_lines;
vga_video_num_columns = screen_info.orig_video_cols;
- state.vgabase = NULL;
+ vgastate.vgabase = NULL;
if (screen_info.orig_video_mode == 7) {
/* Monochrome display */
{
int i, j;
- vga_w(state.vgabase, VGA_PEL_MSK, 0xff);
+ vga_w(vgastate.vgabase, VGA_PEL_MSK, 0xff);
for (i = j = 0; i < 16; i++) {
- vga_w(state.vgabase, VGA_PEL_IW, table[i]);
- vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
- vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
- vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
+ vga_w(vgastate.vgabase, VGA_PEL_IW, table[i]);
+ vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
+ vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
+ vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
}
}
switch (blank) {
case 0: /* Unblank */
if (vga_vesa_blanked) {
- vga_vesa_unblank(&state);
+ vga_vesa_unblank(&vgastate);
vga_vesa_blanked = 0;
}
if (vga_palette_blanked) {
case 1: /* Normal blanking */
case -1: /* Obsolete */
if (!mode_switch && vga_video_type == VIDEO_TYPE_VGAC) {
- vga_pal_blank(&state);
+ vga_pal_blank(&vgastate);
vga_palette_blanked = 1;
return 0;
}
return 1;
default: /* VESA blanking */
if (vga_video_type == VIDEO_TYPE_VGAC) {
- vga_vesa_blank(&state, blank - 1);
+ vga_vesa_blank(&vgastate, blank - 1);
vga_vesa_blanked = blank;
}
return 0;
(charcount != 256 && charcount != 512))
return -EINVAL;
- rc = vgacon_do_font_op(&state, font->data, 1, charcount == 512);
+ rc = vgacon_do_font_op(&vgastate, font->data, 1, charcount == 512);
if (rc)
return rc;
font->charcount = vga_512_chars ? 512 : 256;
if (!font->data)
return 0;
- return vgacon_do_font_op(&state, font->data, 0, vga_512_chars);
+ return vgacon_do_font_op(&vgastate, font->data, 0, vga_512_chars);
}
#else
#include <linux/regulator/consumer.h>
#include <video/videomode.h>
-#include <mach/cpu.h>
#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
{},
};
+MODULE_DEVICE_TABLE(of, tvc_of_match);
+
static struct platform_driver tvc_connector_driver = {
.probe = tvc_probe,
.remove = __exit_p(tvc_remove),
.name = "connector-analog-tv",
.owner = THIS_MODULE,
.of_match_table = tvc_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "connector-dvi",
.owner = THIS_MODULE,
.of_match_table = dvic_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "connector-hdmi",
.owner = THIS_MODULE,
.of_match_table = hdmic_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "tfp410",
.owner = THIS_MODULE,
.of_match_table = tfp410_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "tpd12s015",
.owner = THIS_MODULE,
.of_match_table = tpd_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "panel-dpi",
.owner = THIS_MODULE,
.of_match_table = panel_dpi_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "panel-dsi-cm",
.owner = THIS_MODULE,
.of_match_table = dsicm_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "panel_lgphilips_lb035q02",
.owner = THIS_MODULE,
.of_match_table = lb035q02_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = NEC_8048_PM_OPS,
.of_match_table = nec_8048_of_match,
+ .suppress_bind_attrs = true,
},
.probe = nec_8048_probe,
.remove = nec_8048_remove,
.name = "panel-sharp-ls037v7dw01",
.owner = THIS_MODULE,
.of_match_table = sharp_ls_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "acx565akm",
.owner = THIS_MODULE,
.of_match_table = acx565akm_of_match,
+ .suppress_bind_attrs = true,
},
.probe = acx565akm_probe,
.remove = acx565akm_remove,
.name = "panel-tpo-td028ttec1",
.owner = THIS_MODULE,
.of_match_table = td028ttec1_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &tpo_td043_spi_pm,
.of_match_table = tpo_td043_of_match,
+ .suppress_bind_attrs = true,
},
.probe = tpo_td043_probe,
.remove = tpo_td043_remove,
if (!mp->enabled)
goto out;
+ wait_pending_extra_info_updates();
+
if (!mgr_manual_update(mgr))
dispc_mgr_disable_sync(mgr->id);
DUMPREG(i, DISPC_OVL_FIFO_SIZE_STATUS);
DUMPREG(i, DISPC_OVL_ROW_INC);
DUMPREG(i, DISPC_OVL_PIXEL_INC);
+
if (dss_has_feature(FEAT_PRELOAD))
DUMPREG(i, DISPC_OVL_PRELOAD);
+ if (dss_has_feature(FEAT_MFLAG))
+ DUMPREG(i, DISPC_OVL_MFLAG_THRESHOLD);
if (i == OMAP_DSS_GFX) {
DUMPREG(i, DISPC_OVL_WINDOW_SKIP);
}
if (dss_has_feature(FEAT_ATTR2))
DUMPREG(i, DISPC_OVL_ATTRIBUTES2);
- if (dss_has_feature(FEAT_PRELOAD))
- DUMPREG(i, DISPC_OVL_PRELOAD);
- if (dss_has_feature(FEAT_MFLAG))
- DUMPREG(i, DISPC_OVL_MFLAG_THRESHOLD);
}
#undef DISPC_REG
.owner = THIS_MODULE,
.pm = &dispc_pm_ops,
.of_match_table = dispc_of_match,
+ .suppress_bind_attrs = true,
},
};
DISPC_FIR_COEF_V2_OFFSET(n, i))
#define DISPC_OVL_PRELOAD(n) (DISPC_OVL_BASE(n) + \
DISPC_PRELOAD_OFFSET(n))
-#define DISPC_OVL_MFLAG_THRESHOLD(n) (DISPC_OVL_BASE(n) + \
- DISPC_MFLAG_THRESHOLD_OFFSET(n))
+#define DISPC_OVL_MFLAG_THRESHOLD(n) DISPC_MFLAG_THRESHOLD_OFFSET(n)
/* DISPC up/downsampling FIR filter coefficient structure */
struct dispc_coef {
.driver = {
.name = "omapdss_dpi",
.owner = THIS_MODULE,
+ .suppress_bind_attrs = true,
},
};
} else if (dss_has_feature(FEAT_DSI_PLL_SELFREQDCO)) {
f = cinfo->clkin4ddr < 1000000000 ? 0x2 : 0x4;
- l = FLD_MOD(l, f, 4, 1); /* PLL_SELFREQDCO */
+ l = FLD_MOD(l, f, 3, 1); /* PLL_SELFREQDCO */
}
l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */
.owner = THIS_MODULE,
.pm = &dsi_pm_ops,
.of_match_table = dsi_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &dss_pm_ops,
.of_match_table = dss_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &hdmi_pm_ops,
.of_match_table = hdmi_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &hdmi_pm_ops,
.of_match_table = hdmi_of_match,
+ .suppress_bind_attrs = true,
},
};
r = FLD_MOD(r, 0x0, 14, 14); /* PHY_CLKINEN de-assert during locking */
r = FLD_MOD(r, fmt->refsel, 22, 21); /* REFSEL */
- if (fmt->dcofreq) {
- /* divider programming for frequency beyond 1000Mhz */
- REG_FLD_MOD(pll->base, PLLCTRL_CFG3, fmt->regsd, 17, 10);
+ if (fmt->dcofreq)
r = FLD_MOD(r, 0x4, 3, 1); /* 1000MHz and 2000MHz */
- } else {
+ else
r = FLD_MOD(r, 0x2, 3, 1); /* 500MHz and 1000MHz */
- }
hdmi_write_reg(pll->base, PLLCTRL_CFG2, r);
+ REG_FLD_MOD(pll->base, PLLCTRL_CFG3, fmt->regsd, 17, 10);
+
r = hdmi_read_reg(pll->base, PLLCTRL_CFG4);
r = FLD_MOD(r, fmt->regm2, 24, 18);
r = FLD_MOD(r, fmt->regmf, 17, 0);
/* wait for bit change */
if (hdmi_wait_for_bit_change(pll->base, PLLCTRL_PLL_GO,
- 0, 0, 1) != 1) {
- DSSERR("PLL GO bit not set\n");
+ 0, 0, 0) != 0) {
+ DSSERR("PLL GO bit not clearing\n");
return -ETIMEDOUT;
}
.name = "omapdss_rfbi",
.owner = THIS_MODULE,
.pm = &rfbi_pm_ops,
+ .suppress_bind_attrs = true,
},
};
.driver = {
.name = "omapdss_sdi",
.owner = THIS_MODULE,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &venc_pm_ops,
.of_match_table = venc_of_match,
+ .suppress_bind_attrs = true,
},
};
if (fbdev == NULL)
return;
- for (i = 0; i < fbdev->num_fbs; i++) {
- struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
- int j;
+ for (i = 0; i < fbdev->num_overlays; i++) {
+ struct omap_overlay *ovl = fbdev->overlays[i];
- for (j = 0; j < ofbi->num_overlays; j++) {
- struct omap_overlay *ovl = ofbi->overlays[j];
- ovl->disable(ovl);
- }
+ ovl->disable(ovl);
+
+ if (ovl->manager)
+ ovl->unset_manager(ovl);
}
for (i = 0; i < fbdev->num_fbs; i++)
return r;
}
-static int __exit omapfb_remove(struct platform_device *pdev)
+static int omapfb_remove(struct platform_device *pdev)
{
struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
static struct platform_driver omapfb_driver = {
.probe = omapfb_probe,
- .remove = __exit_p(omapfb_remove),
+ .remove = omapfb_remove,
.driver = {
.name = "omapfb",
.owner = THIS_MODULE,
module_platform_driver(omapfb_driver);
+MODULE_ALIAS("platform:omapfb");
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
MODULE_DESCRIPTION("OMAP2/3 Framebuffer");
MODULE_LICENSE("GPL v2");
}
EXPORT_SYMBOL_GPL(blkdev_write_iter);
-static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
+ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct file *file = iocb->ki_filp;
struct inode *bd_inode = file->f_mapping->host;
iov_iter_truncate(to, size);
return generic_file_read_iter(iocb, to);
}
+EXPORT_SYMBOL_GPL(blkdev_read_iter);
/*
* Try to release a page associated with block device when the system
struct btrfs_root *root, unsigned long count);
int btrfs_async_run_delayed_refs(struct btrfs_root *root,
unsigned long count, int wait);
-int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len);
+int btrfs_lookup_data_extent(struct btrfs_root *root, u64 start, u64 len);
int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 bytenr,
u64 offset, int metadata, u64 *refs, u64 *flags);
struct btrfs_super_block *sb = fs_info->super_copy;
int ret = 0;
- if (sb->root_level > BTRFS_MAX_LEVEL) {
- printk(KERN_ERR "BTRFS: tree_root level too big: %d > %d\n",
- sb->root_level, BTRFS_MAX_LEVEL);
+ if (btrfs_super_root_level(sb) >= BTRFS_MAX_LEVEL) {
+ printk(KERN_ERR "BTRFS: tree_root level too big: %d >= %d\n",
+ btrfs_super_root_level(sb), BTRFS_MAX_LEVEL);
ret = -EINVAL;
}
- if (sb->chunk_root_level > BTRFS_MAX_LEVEL) {
- printk(KERN_ERR "BTRFS: chunk_root level too big: %d > %d\n",
- sb->chunk_root_level, BTRFS_MAX_LEVEL);
+ if (btrfs_super_chunk_root_level(sb) >= BTRFS_MAX_LEVEL) {
+ printk(KERN_ERR "BTRFS: chunk_root level too big: %d >= %d\n",
+ btrfs_super_chunk_root_level(sb), BTRFS_MAX_LEVEL);
ret = -EINVAL;
}
- if (sb->log_root_level > BTRFS_MAX_LEVEL) {
- printk(KERN_ERR "BTRFS: log_root level too big: %d > %d\n",
- sb->log_root_level, BTRFS_MAX_LEVEL);
+ if (btrfs_super_log_root_level(sb) >= BTRFS_MAX_LEVEL) {
+ printk(KERN_ERR "BTRFS: log_root level too big: %d >= %d\n",
+ btrfs_super_log_root_level(sb), BTRFS_MAX_LEVEL);
ret = -EINVAL;
}
* The common minimum, we don't know if we can trust the nodesize/sectorsize
* items yet, they'll be verified later. Issue just a warning.
*/
- if (!IS_ALIGNED(sb->root, 4096))
+ if (!IS_ALIGNED(btrfs_super_root(sb), 4096))
printk(KERN_WARNING "BTRFS: tree_root block unaligned: %llu\n",
sb->root);
- if (!IS_ALIGNED(sb->chunk_root, 4096))
+ if (!IS_ALIGNED(btrfs_super_chunk_root(sb), 4096))
printk(KERN_WARNING "BTRFS: tree_root block unaligned: %llu\n",
sb->chunk_root);
- if (!IS_ALIGNED(sb->log_root, 4096))
+ if (!IS_ALIGNED(btrfs_super_log_root(sb), 4096))
printk(KERN_WARNING "BTRFS: tree_root block unaligned: %llu\n",
- sb->log_root);
+ btrfs_super_log_root(sb));
if (memcmp(fs_info->fsid, sb->dev_item.fsid, BTRFS_UUID_SIZE) != 0) {
printk(KERN_ERR "BTRFS: dev_item UUID does not match fsid: %pU != %pU\n",
* Hint to catch really bogus numbers, bitflips or so, more exact checks are
* done later
*/
- if (sb->num_devices > (1UL << 31))
+ if (btrfs_super_num_devices(sb) > (1UL << 31))
printk(KERN_WARNING "BTRFS: suspicious number of devices: %llu\n",
- sb->num_devices);
+ btrfs_super_num_devices(sb));
- if (sb->bytenr != BTRFS_SUPER_INFO_OFFSET) {
+ if (btrfs_super_bytenr(sb) != BTRFS_SUPER_INFO_OFFSET) {
printk(KERN_ERR "BTRFS: super offset mismatch %llu != %u\n",
- sb->bytenr, BTRFS_SUPER_INFO_OFFSET);
+ btrfs_super_bytenr(sb), BTRFS_SUPER_INFO_OFFSET);
ret = -EINVAL;
}
* The generation is a global counter, we'll trust it more than the others
* but it's still possible that it's the one that's wrong.
*/
- if (sb->generation < sb->chunk_root_generation)
+ if (btrfs_super_generation(sb) < btrfs_super_chunk_root_generation(sb))
printk(KERN_WARNING
"BTRFS: suspicious: generation < chunk_root_generation: %llu < %llu\n",
- sb->generation, sb->chunk_root_generation);
- if (sb->generation < sb->cache_generation && sb->cache_generation != (u64)-1)
+ btrfs_super_generation(sb), btrfs_super_chunk_root_generation(sb));
+ if (btrfs_super_generation(sb) < btrfs_super_cache_generation(sb)
+ && btrfs_super_cache_generation(sb) != (u64)-1)
printk(KERN_WARNING
"BTRFS: suspicious: generation < cache_generation: %llu < %llu\n",
- sb->generation, sb->cache_generation);
+ btrfs_super_generation(sb), btrfs_super_cache_generation(sb));
return ret;
}
rcu_read_unlock();
}
-/* simple helper to search for an existing extent at a given offset */
-int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len)
+/* simple helper to search for an existing data extent at a given offset */
+int btrfs_lookup_data_extent(struct btrfs_root *root, u64 start, u64 len)
{
int ret;
struct btrfs_key key;
key.type = BTRFS_EXTENT_ITEM_KEY;
ret = btrfs_search_slot(NULL, root->fs_info->extent_root, &key, path,
0, 0);
- if (ret > 0) {
- btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
- if (key.objectid == start &&
- key.type == BTRFS_METADATA_ITEM_KEY)
- ret = 0;
- }
btrfs_free_path(path);
return ret;
}
else
key.type = BTRFS_EXTENT_ITEM_KEY;
-again:
ret = btrfs_search_slot(trans, root->fs_info->extent_root,
&key, path, 0, 0);
if (ret < 0)
key.offset == root->nodesize)
ret = 0;
}
- if (ret) {
- key.objectid = bytenr;
- key.type = BTRFS_EXTENT_ITEM_KEY;
- key.offset = root->nodesize;
- btrfs_release_path(path);
- goto again;
- }
}
if (ret == 0) {
ret = 0;
fail:
while (ret < 0 && !list_empty(&tmplist)) {
- sums = list_entry(&tmplist, struct btrfs_ordered_sum, list);
+ sums = list_entry(tmplist.next, struct btrfs_ordered_sum, list);
list_del(&sums->list);
kfree(sums);
}
extent_map_exit();
extent_io_exit();
btrfs_interface_exit();
+ btrfs_end_io_wq_exit();
unregister_filesystem(&btrfs_fs_type);
btrfs_exit_sysfs();
btrfs_cleanup_fs_uuids();
* is this extent already allocated in the extent
* allocation tree? If so, just add a reference
*/
- ret = btrfs_lookup_extent(root, ins.objectid,
+ ret = btrfs_lookup_data_extent(root, ins.objectid,
ins.offset);
if (ret == 0) {
ret = btrfs_inc_extent_ref(trans, root,
page_cache_release(page);
}
-
-static int quiet_error(struct buffer_head *bh)
-{
- if (!test_bit(BH_Quiet, &bh->b_state) && printk_ratelimit())
- return 0;
- return 1;
-}
-
-
-static void buffer_io_error(struct buffer_head *bh)
+static void buffer_io_error(struct buffer_head *bh, char *msg)
{
char b[BDEVNAME_SIZE];
- printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n",
+
+ if (!test_bit(BH_Quiet, &bh->b_state))
+ printk_ratelimited(KERN_ERR
+ "Buffer I/O error on dev %s, logical block %llu%s\n",
bdevname(bh->b_bdev, b),
- (unsigned long long)bh->b_blocknr);
+ (unsigned long long)bh->b_blocknr, msg);
}
/*
void end_buffer_write_sync(struct buffer_head *bh, int uptodate)
{
- char b[BDEVNAME_SIZE];
-
if (uptodate) {
set_buffer_uptodate(bh);
} else {
- if (!quiet_error(bh)) {
- buffer_io_error(bh);
- printk(KERN_WARNING "lost page write due to "
- "I/O error on %s\n",
- bdevname(bh->b_bdev, b));
- }
+ buffer_io_error(bh, ", lost sync page write");
set_buffer_write_io_error(bh);
clear_buffer_uptodate(bh);
}
set_buffer_uptodate(bh);
} else {
clear_buffer_uptodate(bh);
- if (!quiet_error(bh))
- buffer_io_error(bh);
+ buffer_io_error(bh, ", async page read");
SetPageError(page);
}
*/
void end_buffer_async_write(struct buffer_head *bh, int uptodate)
{
- char b[BDEVNAME_SIZE];
unsigned long flags;
struct buffer_head *first;
struct buffer_head *tmp;
if (uptodate) {
set_buffer_uptodate(bh);
} else {
- if (!quiet_error(bh)) {
- buffer_io_error(bh);
- printk(KERN_WARNING "lost page write due to "
- "I/O error on %s\n",
- bdevname(bh->b_bdev, b));
- }
+ buffer_io_error(bh, ", lost async page write");
set_bit(AS_EIO, &page->mapping->flags);
set_buffer_write_io_error(bh);
clear_buffer_uptodate(bh);
"not specified.");
return 0;
}
- } else {
- if (sbi->s_jquota_fmt) {
- ext3_msg(sb, KERN_ERR, "error: journaled quota format "
- "specified with no journaling "
- "enabled.");
- return 0;
- }
}
#endif
return 1;
}
}
- allocated = ext4_split_extent(handle, inode, ppath,
- &split_map, split_flag, flags);
- if (allocated < 0)
- err = allocated;
-
+ err = ext4_split_extent(handle, inode, ppath, &split_map, split_flag,
+ flags);
+ if (err > 0)
+ err = 0;
out:
/* If we have gotten a failure, don't zero out status tree */
if (!err)
iov_iter_truncate(from, sbi->s_bitmap_maxbytes - pos);
}
+ iocb->private = &overwrite;
if (o_direct) {
blk_start_plug(&plug);
- iocb->private = &overwrite;
/* check whether we do a DIO overwrite or not */
if (ext4_should_dioread_nolock(inode) && !aio_mutex &&
struct buffer_head *block_bitmap_bh;
block_bitmap_bh = ext4_read_block_bitmap(sb, group);
+ if (!block_bitmap_bh) {
+ err = -EIO;
+ goto out;
+ }
BUFFER_TRACE(block_bitmap_bh, "get block bitmap access");
err = ext4_journal_get_write_access(handle, block_bitmap_bh);
if (err) {
if (val)
ext4_set_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
else {
- jbd2_journal_flush(journal);
+ err = jbd2_journal_flush(journal);
+ if (err < 0) {
+ jbd2_journal_unlock_updates(journal);
+ ext4_inode_resume_unlocked_dio(inode);
+ return err;
+ }
ext4_clear_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
}
ext4_set_aops(inode);
hinfo.hash_version += EXT4_SB(dir->i_sb)->s_hash_unsigned;
hinfo.seed = EXT4_SB(dir->i_sb)->s_hash_seed;
ext4fs_dirhash(name, namelen, &hinfo);
+ memset(frames, 0, sizeof(frames));
frame = frames;
frame->entries = entries;
frame->at = entries;
frame->bh = bh;
bh = bh2;
- ext4_handle_dirty_dx_node(handle, dir, frame->bh);
- ext4_handle_dirty_dirent_node(handle, dir, bh);
+ retval = ext4_handle_dirty_dx_node(handle, dir, frame->bh);
+ if (retval)
+ goto out_frames;
+ retval = ext4_handle_dirty_dirent_node(handle, dir, bh);
+ if (retval)
+ goto out_frames;
de = do_split(handle,dir, &bh, frame, &hinfo);
if (IS_ERR(de)) {
- /*
- * Even if the block split failed, we have to properly write
- * out all the changes we did so far. Otherwise we can end up
- * with corrupted filesystem.
- */
- ext4_mark_inode_dirty(handle, dir);
- dx_release(frames);
- return PTR_ERR(de);
+ retval = PTR_ERR(de);
+ goto out_frames;
}
dx_release(frames);
retval = add_dirent_to_buf(handle, dentry, inode, de, bh);
brelse(bh);
return retval;
+out_frames:
+ /*
+ * Even if the block split failed, we have to properly write
+ * out all the changes we did so far. Otherwise we can end up
+ * with corrupted filesystem.
+ */
+ ext4_mark_inode_dirty(handle, dir);
+ dx_release(frames);
+ return retval;
}
/*
break;
if (meta_bg == 0)
- backup_block = group * bpg + blk_off;
+ backup_block = ((ext4_fsblk_t)group) * bpg + blk_off;
else
backup_block = (ext4_group_first_block_no(sb, group) +
ext4_bg_has_super(sb, group));
#ifdef CONFIG_EXT4_FS_POSIX_ACL
set_opt(sb, POSIX_ACL);
#endif
+ /* don't forget to enable journal_csum when metadata_csum is enabled. */
+ if (ext4_has_metadata_csum(sb))
+ set_opt(sb, JOURNAL_CHECKSUM);
+
if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_DATA)
set_opt(sb, JOURNAL_DATA);
else if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_ORDERED)
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_MMP) &&
!(sb->s_flags & MS_RDONLY))
if (ext4_multi_mount_protect(sb, le64_to_cpu(es->s_mmp_block)))
- goto failed_mount3;
+ goto failed_mount3a;
/*
* The first inode we look at is the journal inode. Don't try
if (!test_opt(sb, NOLOAD) &&
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
- goto failed_mount3;
+ goto failed_mount3a;
} else if (test_opt(sb, NOLOAD) && !(sb->s_flags & MS_RDONLY) &&
EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
ext4_msg(sb, KERN_ERR, "required journal recovery "
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
}
+failed_mount3a:
ext4_es_unregister_shrinker(sbi);
failed_mount3:
del_timer_sync(&sbi->s_err_report);
goto restore_opts;
}
+ if ((old_opts.s_mount_opt & EXT4_MOUNT_JOURNAL_CHECKSUM) ^
+ test_opt(sb, JOURNAL_CHECKSUM)) {
+ ext4_msg(sb, KERN_ERR, "changing journal_checksum "
+ "during remount not supported");
+ err = -EINVAL;
+ goto restore_opts;
+ }
+
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
if (test_opt2(sb, EXPLICIT_DELALLOC)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
#define BEQUIET
static int isofs_hashi(const struct dentry *parent, struct qstr *qstr);
-static int isofs_hash(const struct dentry *parent, struct qstr *qstr);
static int isofs_dentry_cmpi(const struct dentry *parent,
const struct dentry *dentry,
unsigned int len, const char *str, const struct qstr *name);
-static int isofs_dentry_cmp(const struct dentry *parent,
- const struct dentry *dentry,
- unsigned int len, const char *str, const struct qstr *name);
#ifdef CONFIG_JOLIET
static int isofs_hashi_ms(const struct dentry *parent, struct qstr *qstr);
static const struct dentry_operations isofs_dentry_ops[] = {
- {
- .d_hash = isofs_hash,
- .d_compare = isofs_dentry_cmp,
- },
{
.d_hash = isofs_hashi,
.d_compare = isofs_dentry_cmpi,
return 1;
}
-static int
-isofs_hash(const struct dentry *dentry, struct qstr *qstr)
-{
- return isofs_hash_common(qstr, 0);
-}
-
static int
isofs_hashi(const struct dentry *dentry, struct qstr *qstr)
{
return isofs_hashi_common(qstr, 0);
}
-static int
-isofs_dentry_cmp(const struct dentry *parent, const struct dentry *dentry,
- unsigned int len, const char *str, const struct qstr *name)
-{
- return isofs_dentry_cmp_common(len, str, name, 0, 0);
-}
-
static int
isofs_dentry_cmpi(const struct dentry *parent, const struct dentry *dentry,
unsigned int len, const char *str, const struct qstr *name)
if (opt.check == 'r')
table++;
- s->s_d_op = &isofs_dentry_ops[table];
+ if (table)
+ s->s_d_op = &isofs_dentry_ops[table - 1];
/* get the root dentry */
s->s_root = d_make_root(inode);
isofs_cmp(struct dentry *dentry, const char *compare, int dlen)
{
struct qstr qstr;
-
- if (!compare)
- return 1;
-
- /* check special "." and ".." files */
- if (dlen == 1) {
- /* "." */
- if (compare[0] == 0) {
- if (!dentry->d_name.len)
- return 0;
- compare = ".";
- } else if (compare[0] == 1) {
- compare = "..";
- dlen = 2;
- }
- }
-
qstr.name = compare;
qstr.len = dlen;
+ if (likely(!dentry->d_op))
+ return dentry->d_name.len != dlen || memcmp(dentry->d_name.name, compare, dlen);
return dentry->d_op->d_compare(NULL, NULL, dentry->d_name.len, dentry->d_name.name, &qstr);
}
(!(de->flags[-sbi->s_high_sierra] & 1))) &&
(sbi->s_showassoc ||
(!(de->flags[-sbi->s_high_sierra] & 4)))) {
- match = (isofs_cmp(dentry, dpnt, dlen) == 0);
+ if (dpnt && (dlen > 1 || dpnt[0] > 1))
+ match = (isofs_cmp(dentry, dpnt, dlen) == 0);
}
if (match) {
isofs_normalize_block_and_offset(de,
#include <linux/bio.h>
#endif
#include <linux/log2.h>
+#include <linux/hash.h>
static struct kmem_cache *revoke_record_cache;
static struct kmem_cache *revoke_table_cache;
/* Utility functions to maintain the revoke table */
-/* Borrowed from buffer.c: this is a tried and tested block hash function */
static inline int hash(journal_t *journal, unsigned int block)
{
struct jbd_revoke_table_s *table = journal->j_revoke;
- int hash_shift = table->hash_shift;
- return ((block << (hash_shift - 6)) ^
- (block >> 13) ^
- (block << (hash_shift - 12))) & (table->hash_size - 1);
+ return hash_32(block, table->hash_shift);
}
static int insert_revoke_hash(journal_t *journal, unsigned int blocknr,
#include <linux/init.h>
#include <linux/bio.h>
#include <linux/log2.h>
+#include <linux/hash.h>
#endif
static struct kmem_cache *jbd2_revoke_record_cache;
/* Utility functions to maintain the revoke table */
-/* Borrowed from buffer.c: this is a tried and tested block hash function */
static inline int hash(journal_t *journal, unsigned long long block)
{
- struct jbd2_revoke_table_s *table = journal->j_revoke;
- int hash_shift = table->hash_shift;
- int hash = (int)block ^ (int)((block >> 31) >> 1);
-
- return ((hash << (hash_shift - 6)) ^
- (hash >> 13) ^
- (hash << (hash_shift - 12))) & (table->hash_size - 1);
+ return hash_64(block, journal->j_revoke->hash_shift);
}
static int insert_revoke_hash(journal_t *journal, unsigned long long blocknr,
}
mutex_lock_nested(&p1->d_inode->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_CHILD);
+ mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_PARENT2);
return NULL;
}
EXPORT_SYMBOL(lock_rename);
if (error)
goto out2;
audit_inode(pathname, nd->path.dentry, 0);
- error = may_open(&nd->path, op->acc_mode, op->open_flag);
+ /* Don't check for other permissions, the inode was just created */
+ error = may_open(&nd->path, MAY_OPEN, op->open_flag);
if (error)
goto out2;
file->f_path.mnt = nd->path.mnt;
spin_unlock(&inode->i_lock);
/* In case the dropping of a reference would nuke next_i. */
- if ((&next_i->i_sb_list != list) &&
- atomic_read(&next_i->i_count)) {
+ while (&next_i->i_sb_list != list) {
spin_lock(&next_i->i_lock);
- if (!(next_i->i_state & (I_FREEING | I_WILL_FREE))) {
+ if (!(next_i->i_state & (I_FREEING | I_WILL_FREE)) &&
+ atomic_read(&next_i->i_count)) {
__iget(next_i);
need_iput = next_i;
+ spin_unlock(&next_i->i_lock);
+ break;
}
spin_unlock(&next_i->i_lock);
+ next_i = list_entry(next_i->i_sb_list.next,
+ struct inode, i_sb_list);
}
/*
- * We can safely drop inode_sb_list_lock here because we hold
- * references on both inode and next_i. Also no new inodes
- * will be added since the umount has begun.
+ * We can safely drop inode_sb_list_lock here because either
+ * we actually hold references on both inode and next_i or
+ * end of list. Also no new inodes will be added since the
+ * umount has begun.
*/
spin_unlock(&inode_sb_list_lock);
size_t veclen, size_t total)
{
int ret;
- struct msghdr msg;
+ struct msghdr msg = {.msg_flags = 0,};
if (sock == NULL) {
ret = -EINVAL;
* NOTE: This dentry already has ->d_op set from
* ocfs2_get_parent() and ocfs2_get_dentry()
*/
- if (ret)
+ if (!IS_ERR_OR_NULL(ret))
dentry = ret;
status = ocfs2_dentry_attach_lock(dentry, inode,
unsigned int len;
unsigned int type;
u64 ino;
- bool is_whiteout;
struct list_head l_node;
struct rb_node node;
+ bool is_whiteout;
+ bool is_cursor;
char name[];
};
p->type = d_type;
p->ino = ino;
p->is_whiteout = false;
+ p->is_cursor = false;
}
return p;
{
struct ovl_dir_cache *cache = od->cache;
- list_del(&od->cursor.l_node);
+ list_del_init(&od->cursor.l_node);
WARN_ON(cache->refcount <= 0);
cache->refcount--;
if (!cache->refcount) {
mutex_lock(&dir->d_inode->i_mutex);
list_for_each_entry(p, rdd->list, l_node) {
- if (!p->name)
+ if (p->is_cursor)
continue;
if (p->type != DT_CHR)
}
out:
return err;
-
}
static void ovl_seek_cursor(struct ovl_dir_file *od, loff_t pos)
loff_t off = 0;
list_for_each_entry(p, &od->cache->entries, l_node) {
- if (!p->name)
+ if (p->is_cursor)
continue;
if (off >= pos)
break;
p = list_entry(od->cursor.l_node.next, struct ovl_cache_entry, l_node);
/* Skip cursors */
- if (p->name) {
+ if (!p->is_cursor) {
if (!p->is_whiteout) {
if (!dir_emit(ctx, p->name, p->len, p->ino, p->type))
break;
if (!od->is_upper && ovl_path_type(dentry) == OVL_PATH_MERGE) {
struct inode *inode = file_inode(file);
- realfile = od->upperfile;
+ realfile =lockless_dereference(od->upperfile);
if (!realfile) {
struct path upperpath;
ovl_path_upper(dentry, &upperpath);
realfile = ovl_path_open(&upperpath, O_RDONLY);
+ smp_mb__before_spinlock();
mutex_lock(&inode->i_mutex);
if (!od->upperfile) {
if (IS_ERR(realfile)) {
od->realfile = realfile;
od->is_real = (type != OVL_PATH_MERGE);
od->is_upper = (type != OVL_PATH_LOWER);
+ od->cursor.is_cursor = true;
file->private_data = od;
return 0;
{
struct ovl_cache_entry *p;
- mutex_lock_nested(&upper->d_inode->i_mutex, I_MUTEX_PARENT);
+ mutex_lock_nested(&upper->d_inode->i_mutex, I_MUTEX_CHILD);
list_for_each_entry(p, list, l_node) {
struct dentry *dentry;
dqstats_inc(DQST_LOOKUPS);
err = sb->dq_op->write_dquot(dquot);
if (!ret && err)
- err = ret;
+ ret = err;
dqput(dquot);
spin_lock(&dq_list_lock);
}
goto out;
}
-
+/*
+ * Preallocate and zero a range of a file. This mechanism has the allocation
+ * semantics of fallocate and in addition converts data in the range to zeroes.
+ */
int
xfs_zero_file_space(
struct xfs_inode *ip,
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
- uint granularity;
- xfs_off_t start_boundary;
- xfs_off_t end_boundary;
+ uint blksize;
int error;
trace_xfs_zero_file_space(ip);
- granularity = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
+ blksize = 1 << mp->m_sb.sb_blocklog;
/*
- * Round the range of extents we are going to convert inwards. If the
- * offset is aligned, then it doesn't get changed so we zero from the
- * start of the block offset points to.
+ * Punch a hole and prealloc the range. We use hole punch rather than
+ * unwritten extent conversion for two reasons:
+ *
+ * 1.) Hole punch handles partial block zeroing for us.
+ *
+ * 2.) If prealloc returns ENOSPC, the file range is still zero-valued
+ * by virtue of the hole punch.
*/
- start_boundary = round_up(offset, granularity);
- end_boundary = round_down(offset + len, granularity);
-
- ASSERT(start_boundary >= offset);
- ASSERT(end_boundary <= offset + len);
-
- if (start_boundary < end_boundary - 1) {
- /*
- * Writeback the range to ensure any inode size updates due to
- * appending writes make it to disk (otherwise we could just
- * punch out the delalloc blocks).
- */
- error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
- start_boundary, end_boundary - 1);
- if (error)
- goto out;
- truncate_pagecache_range(VFS_I(ip), start_boundary,
- end_boundary - 1);
-
- /* convert the blocks */
- error = xfs_alloc_file_space(ip, start_boundary,
- end_boundary - start_boundary - 1,
- XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT);
- if (error)
- goto out;
-
- /* We've handled the interior of the range, now for the edges */
- if (start_boundary != offset) {
- error = xfs_iozero(ip, offset, start_boundary - offset);
- if (error)
- goto out;
- }
-
- if (end_boundary != offset + len)
- error = xfs_iozero(ip, end_boundary,
- offset + len - end_boundary);
-
- } else {
- /*
- * It's either a sub-granularity range or the range spanned lies
- * partially across two adjacent blocks.
- */
- error = xfs_iozero(ip, offset, len);
- }
+ error = xfs_free_file_space(ip, offset, len);
+ if (error)
+ goto out;
+ error = xfs_alloc_file_space(ip, round_down(offset, blksize),
+ round_up(offset + len, blksize) -
+ round_down(offset, blksize),
+ XFS_BMAPI_PREALLOC);
out:
return error;
XFS_WANT_CORRUPTED_RETURN(stat == 1);
/* Check if the record contains the inode in request */
- if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino)
- return -EINVAL;
+ if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino) {
+ *icount = 0;
+ return 0;
+ }
idx = agino - irec->ir_startino + 1;
if (idx < XFS_INODES_PER_CHUNK &&
#define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size)
+struct xfs_bulkstat_agichunk {
+ char __user **ac_ubuffer;/* pointer into user's buffer */
+ int ac_ubleft; /* bytes left in user's buffer */
+ int ac_ubelem; /* spaces used in user's buffer */
+};
+
/*
* Process inodes in chunk with a pointer to a formatter function
* that will iget the inode and fill in the appropriate structure.
*/
-int
+static int
xfs_bulkstat_ag_ichunk(
struct xfs_mount *mp,
xfs_agnumber_t agno,
struct xfs_inobt_rec_incore *irbp,
bulkstat_one_pf formatter,
size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp)
+ struct xfs_bulkstat_agichunk *acp,
+ xfs_agino_t *last_agino)
{
- xfs_ino_t lastino = acp->ac_lastino;
char __user **ubufp = acp->ac_ubuffer;
- int ubleft = acp->ac_ubleft;
- int ubelem = acp->ac_ubelem;
- int chunkidx, clustidx;
+ int chunkidx;
int error = 0;
- xfs_agino_t agino;
+ xfs_agino_t agino = irbp->ir_startino;
- for (agino = irbp->ir_startino, chunkidx = clustidx = 0;
- XFS_BULKSTAT_UBLEFT(ubleft) &&
- irbp->ir_freecount < XFS_INODES_PER_CHUNK;
- chunkidx++, clustidx++, agino++) {
- int fmterror; /* bulkstat formatter result */
+ for (chunkidx = 0; chunkidx < XFS_INODES_PER_CHUNK;
+ chunkidx++, agino++) {
+ int fmterror;
int ubused;
- xfs_ino_t ino = XFS_AGINO_TO_INO(mp, agno, agino);
- ASSERT(chunkidx < XFS_INODES_PER_CHUNK);
+ /* inode won't fit in buffer, we are done */
+ if (acp->ac_ubleft < statstruct_size)
+ break;
/* Skip if this inode is free */
- if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free) {
- lastino = ino;
+ if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free)
continue;
- }
-
- /*
- * Count used inodes as free so we can tell when the
- * chunk is used up.
- */
- irbp->ir_freecount++;
/* Get the inode and fill in a single buffer */
ubused = statstruct_size;
- error = formatter(mp, ino, *ubufp, ubleft, &ubused, &fmterror);
- if (fmterror == BULKSTAT_RV_NOTHING) {
- if (error && error != -ENOENT && error != -EINVAL) {
- ubleft = 0;
- break;
- }
- lastino = ino;
- continue;
- }
- if (fmterror == BULKSTAT_RV_GIVEUP) {
- ubleft = 0;
+ error = formatter(mp, XFS_AGINO_TO_INO(mp, agno, agino),
+ *ubufp, acp->ac_ubleft, &ubused, &fmterror);
+
+ if (fmterror == BULKSTAT_RV_GIVEUP ||
+ (error && error != -ENOENT && error != -EINVAL)) {
+ acp->ac_ubleft = 0;
ASSERT(error);
break;
}
- if (*ubufp)
- *ubufp += ubused;
- ubleft -= ubused;
- ubelem++;
- lastino = ino;
+
+ /* be careful not to leak error if at end of chunk */
+ if (fmterror == BULKSTAT_RV_NOTHING || error) {
+ error = 0;
+ continue;
+ }
+
+ *ubufp += ubused;
+ acp->ac_ubleft -= ubused;
+ acp->ac_ubelem++;
}
- acp->ac_lastino = lastino;
- acp->ac_ubleft = ubleft;
- acp->ac_ubelem = ubelem;
+ /*
+ * Post-update *last_agino. At this point, agino will always point one
+ * inode past the last inode we processed successfully. Hence we
+ * substract that inode when setting the *last_agino cursor so that we
+ * return the correct cookie to userspace. On the next bulkstat call,
+ * the inode under the lastino cookie will be skipped as we have already
+ * processed it here.
+ */
+ *last_agino = agino - 1;
return error;
}
xfs_agino_t agino; /* inode # in allocation group */
xfs_agnumber_t agno; /* allocation group number */
xfs_btree_cur_t *cur; /* btree cursor for ialloc btree */
- int end_of_ag; /* set if we've seen the ag end */
- int error; /* error code */
- int fmterror;/* bulkstat formatter result */
- int i; /* loop index */
- int icount; /* count of inodes good in irbuf */
size_t irbsize; /* size of irec buffer in bytes */
- xfs_ino_t ino; /* inode number (filesystem) */
- xfs_inobt_rec_incore_t *irbp; /* current irec buffer pointer */
xfs_inobt_rec_incore_t *irbuf; /* start of irec buffer */
- xfs_inobt_rec_incore_t *irbufend; /* end of good irec buffer entries */
- xfs_ino_t lastino; /* last inode number returned */
int nirbuf; /* size of irbuf */
- int rval; /* return value error code */
- int tmp; /* result value from btree calls */
int ubcount; /* size of user's buffer */
- int ubleft; /* bytes left in user's buffer */
- char __user *ubufp; /* pointer into user's buffer */
- int ubelem; /* spaces used in user's buffer */
+ struct xfs_bulkstat_agichunk ac;
+ int error = 0;
/*
* Get the last inode value, see if there's nothing to do.
*/
- ino = (xfs_ino_t)*lastinop;
- lastino = ino;
- agno = XFS_INO_TO_AGNO(mp, ino);
- agino = XFS_INO_TO_AGINO(mp, ino);
+ agno = XFS_INO_TO_AGNO(mp, *lastinop);
+ agino = XFS_INO_TO_AGINO(mp, *lastinop);
if (agno >= mp->m_sb.sb_agcount ||
- ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
+ *lastinop != XFS_AGINO_TO_INO(mp, agno, agino)) {
*done = 1;
*ubcountp = 0;
return 0;
}
ubcount = *ubcountp; /* statstruct's */
- ubleft = ubcount * statstruct_size; /* bytes */
- *ubcountp = ubelem = 0;
+ ac.ac_ubuffer = &ubuffer;
+ ac.ac_ubleft = ubcount * statstruct_size; /* bytes */;
+ ac.ac_ubelem = 0;
+
+ *ubcountp = 0;
*done = 0;
- fmterror = 0;
- ubufp = ubuffer;
+
irbuf = kmem_zalloc_greedy(&irbsize, PAGE_SIZE, PAGE_SIZE * 4);
if (!irbuf)
return -ENOMEM;
* Loop over the allocation groups, starting from the last
* inode returned; 0 means start of the allocation group.
*/
- rval = 0;
- while (XFS_BULKSTAT_UBLEFT(ubleft) && agno < mp->m_sb.sb_agcount) {
- cond_resched();
+ while (agno < mp->m_sb.sb_agcount) {
+ struct xfs_inobt_rec_incore *irbp = irbuf;
+ struct xfs_inobt_rec_incore *irbufend = irbuf + nirbuf;
+ bool end_of_ag = false;
+ int icount = 0;
+ int stat;
+
error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp);
if (error)
break;
*/
cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno,
XFS_BTNUM_INO);
- irbp = irbuf;
- irbufend = irbuf + nirbuf;
- end_of_ag = 0;
- icount = 0;
if (agino > 0) {
/*
* In the middle of an allocation group, we need to get
error = xfs_bulkstat_grab_ichunk(cur, agino, &icount, &r);
if (error)
- break;
+ goto del_cursor;
if (icount) {
irbp->ir_startino = r.ir_startino;
irbp->ir_freecount = r.ir_freecount;
irbp->ir_free = r.ir_free;
irbp++;
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
}
/* Increment to the next record */
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
} else {
/* Start of ag. Lookup the first inode chunk */
- error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &tmp);
+ error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &stat);
+ }
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
}
- if (error)
- break;
/*
* Loop through inode btree records in this ag,
while (irbp < irbufend && icount < ubcount) {
struct xfs_inobt_rec_incore r;
- error = xfs_inobt_get_rec(cur, &r, &i);
- if (error || i == 0) {
- end_of_ag = 1;
- break;
+ error = xfs_inobt_get_rec(cur, &r, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
}
/*
irbp++;
icount += XFS_INODES_PER_CHUNK - r.ir_freecount;
}
- /*
- * Set agino to after this chunk and bump the cursor.
- */
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
+ }
cond_resched();
}
+
/*
- * Drop the btree buffers and the agi buffer.
- * We can't hold any of the locks these represent
- * when calling iget.
+ * Drop the btree buffers and the agi buffer as we can't hold any
+ * of the locks these represent when calling iget. If there is a
+ * pending error, then we are done.
*/
+del_cursor:
xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
xfs_buf_relse(agbp);
+ if (error)
+ break;
/*
- * Now format all the good inodes into the user's buffer.
+ * Now format all the good inodes into the user's buffer. The
+ * call to xfs_bulkstat_ag_ichunk() sets up the agino pointer
+ * for the next loop iteration.
*/
irbufend = irbp;
for (irbp = irbuf;
- irbp < irbufend && XFS_BULKSTAT_UBLEFT(ubleft); irbp++) {
- struct xfs_bulkstat_agichunk ac;
-
- ac.ac_lastino = lastino;
- ac.ac_ubuffer = &ubuffer;
- ac.ac_ubleft = ubleft;
- ac.ac_ubelem = ubelem;
+ irbp < irbufend && ac.ac_ubleft >= statstruct_size;
+ irbp++) {
error = xfs_bulkstat_ag_ichunk(mp, agno, irbp,
- formatter, statstruct_size, &ac);
+ formatter, statstruct_size, &ac,
+ &agino);
if (error)
- rval = error;
-
- lastino = ac.ac_lastino;
- ubleft = ac.ac_ubleft;
- ubelem = ac.ac_ubelem;
+ break;
cond_resched();
}
+
/*
- * Set up for the next loop iteration.
+ * If we've run out of space or had a formatting error, we
+ * are now done
*/
- if (XFS_BULKSTAT_UBLEFT(ubleft)) {
- if (end_of_ag) {
- agno++;
- agino = 0;
- } else
- agino = XFS_INO_TO_AGINO(mp, lastino);
- } else
+ if (ac.ac_ubleft < statstruct_size || error)
break;
+
+ if (end_of_ag) {
+ agno++;
+ agino = 0;
+ }
}
/*
* Done, we're either out of filesystem or space to put the data.
*/
kmem_free(irbuf);
- *ubcountp = ubelem;
+ *ubcountp = ac.ac_ubelem;
+
/*
- * Found some inodes, return them now and return the error next time.
+ * We found some inodes, so clear the error status and return them.
+ * The lastino pointer will point directly at the inode that triggered
+ * any error that occurred, so on the next call the error will be
+ * triggered again and propagated to userspace as there will be no
+ * formatted inodes in the buffer.
*/
- if (ubelem)
- rval = 0;
- if (agno >= mp->m_sb.sb_agcount) {
- /*
- * If we ran out of filesystem, mark lastino as off
- * the end of the filesystem, so the next call
- * will return immediately.
- */
- *lastinop = (xfs_ino_t)XFS_AGINO_TO_INO(mp, agno, 0);
+ if (ac.ac_ubelem)
+ error = 0;
+
+ /*
+ * If we ran out of filesystem, lastino will point off the end of
+ * the filesystem so the next call will return immediately.
+ */
+ *lastinop = XFS_AGINO_TO_INO(mp, agno, agino);
+ if (agno >= mp->m_sb.sb_agcount)
*done = 1;
- } else
- *lastinop = (xfs_ino_t)lastino;
- return rval;
+ return error;
}
int
int *ubused,
int *stat);
-struct xfs_bulkstat_agichunk {
- xfs_ino_t ac_lastino; /* last inode returned */
- char __user **ac_ubuffer;/* pointer into user's buffer */
- int ac_ubleft; /* bytes left in user's buffer */
- int ac_ubelem; /* spaces used in user's buffer */
-};
-
-int
-xfs_bulkstat_ag_ichunk(
- struct xfs_mount *mp,
- xfs_agnumber_t agno,
- struct xfs_inobt_rec_incore *irbp,
- bulkstat_one_pf formatter,
- size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp);
-
/*
* Values for stat return value.
*/
{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
- {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
#define VF610_CLK_FASK_CLK_SEL 8
#define VF610_CLK_AUDIO_EXT 9
#define VF610_CLK_ENET_EXT 10
-#define VF610_CLK_PLL1_MAIN 11
+#define VF610_CLK_PLL1_SYS 11
#define VF610_CLK_PLL1_PFD1 12
#define VF610_CLK_PLL1_PFD2 13
#define VF610_CLK_PLL1_PFD3 14
#define VF610_CLK_PLL1_PFD4 15
-#define VF610_CLK_PLL2_MAIN 16
+#define VF610_CLK_PLL2_BUS 16
#define VF610_CLK_PLL2_PFD1 17
#define VF610_CLK_PLL2_PFD2 18
#define VF610_CLK_PLL2_PFD3 19
#define VF610_CLK_PLL2_PFD4 20
-#define VF610_CLK_PLL3_MAIN 21
+#define VF610_CLK_PLL3_USB_OTG 21
#define VF610_CLK_PLL3_PFD1 22
#define VF610_CLK_PLL3_PFD2 23
#define VF610_CLK_PLL3_PFD3 24
#define VF610_CLK_PLL3_PFD4 25
-#define VF610_CLK_PLL4_MAIN 26
-#define VF610_CLK_PLL5_MAIN 27
-#define VF610_CLK_PLL6_MAIN 28
+#define VF610_CLK_PLL4_AUDIO 26
+#define VF610_CLK_PLL5_ENET 27
+#define VF610_CLK_PLL6_VIDEO 28
#define VF610_CLK_PLL3_MAIN_DIV 29
#define VF610_CLK_PLL4_MAIN_DIV 30
#define VF610_CLK_PLL6_MAIN_DIV 31
#define VF610_CLK_DMAMUX3 153
#define VF610_CLK_FLEXCAN0_EN 154
#define VF610_CLK_FLEXCAN1_EN 155
-#define VF610_CLK_PLL7_MAIN 156
+#define VF610_CLK_PLL7_USB_HOST 156
#define VF610_CLK_USBPHY0 157
#define VF610_CLK_USBPHY1 158
-#define VF610_CLK_END 159
+#define VF610_CLK_LVDS1_IN 159
+#define VF610_CLK_ANACLK1 160
+#define VF610_CLK_PLL1_BYPASS_SRC 161
+#define VF610_CLK_PLL2_BYPASS_SRC 162
+#define VF610_CLK_PLL3_BYPASS_SRC 163
+#define VF610_CLK_PLL4_BYPASS_SRC 164
+#define VF610_CLK_PLL5_BYPASS_SRC 165
+#define VF610_CLK_PLL6_BYPASS_SRC 166
+#define VF610_CLK_PLL7_BYPASS_SRC 167
+#define VF610_CLK_PLL1 168
+#define VF610_CLK_PLL2 169
+#define VF610_CLK_PLL3 170
+#define VF610_CLK_PLL4 171
+#define VF610_CLK_PLL5 172
+#define VF610_CLK_PLL6 173
+#define VF610_CLK_PLL7 174
+#define VF610_PLL1_BYPASS 175
+#define VF610_PLL2_BYPASS 176
+#define VF610_PLL3_BYPASS 177
+#define VF610_PLL4_BYPASS 178
+#define VF610_PLL5_BYPASS 179
+#define VF610_PLL6_BYPASS 180
+#define VF610_PLL7_BYPASS 181
+#define VF610_CLK_END 182
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
/*
* tag stuff
*/
-#define blk_rq_tagged(rq) \
- ((rq)->mq_ctx || ((rq)->cmd_flags & REQ_QUEUED))
+#define blk_rq_tagged(rq) ((rq)->cmd_flags & REQ_QUEUED)
extern int blk_queue_start_tag(struct request_queue *, struct request *);
extern struct request *blk_queue_find_tag(struct request_queue *, int);
extern void blk_queue_end_tag(struct request_queue *, struct request *);
struct request *r1,
struct request *r2)
{
- return 0;
+ return true;
}
static inline bool blk_integrity_merge_bio(struct request_queue *rq,
struct request *r,
struct bio *b)
{
- return 0;
+ return true;
}
static inline bool blk_integrity_is_initialized(struct gendisk *g)
{
extern phys_addr_t cma_get_base(struct cma *cma);
extern unsigned long cma_get_size(struct cma *cma);
-extern int __init cma_declare_contiguous(phys_addr_t size,
- phys_addr_t base, phys_addr_t limit,
+extern int __init cma_declare_contiguous(phys_addr_t base,
+ phys_addr_t size, phys_addr_t limit,
phys_addr_t alignment, unsigned int order_per_bit,
bool fixed, struct cma **res_cma);
-extern int cma_init_reserved_mem(phys_addr_t size,
- phys_addr_t base, int order_per_bit,
+extern int cma_init_reserved_mem(phys_addr_t base,
+ phys_addr_t size, int order_per_bit,
struct cma **res_cma);
extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align);
extern bool cma_release(struct cma *cma, struct page *pages, int count);
* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
*
* Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
- * Fixed in GCC 4.8.2 and later versions.
*
* (asm goto is automatically volatile - the naming reflects this.)
*/
* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
*
* Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
- * Fixed in GCC 4.8.2 and later versions.
*
* (asm goto is automatically volatile - the naming reflects this.)
*/
* 2: child/target
* 3: xattr
* 4: second non-directory
- * The last is for certain operations (such as rename) which lock two
+ * 5: second parent (when locking independent directories in rename)
+ *
+ * I_MUTEX_NONDIR2 is for certain operations (such as rename) which lock two
* non-directories at once.
*
* The locking order between these classes is
- * parent -> child -> normal -> xattr -> second non-directory
+ * parent[2] -> child -> grandchild -> normal -> xattr -> second non-directory
*/
enum inode_i_mutex_lock_class
{
I_MUTEX_PARENT,
I_MUTEX_CHILD,
I_MUTEX_XATTR,
- I_MUTEX_NONDIR2
+ I_MUTEX_NONDIR2,
+ I_MUTEX_PARENT2,
};
void lock_two_nondirectories(struct inode *, struct inode*);
extern ssize_t new_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos);
/* fs/block_dev.c */
+extern ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to);
extern ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from);
extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
int datasync);
* Vendor specific HID device groups
*/
#define HID_GROUP_RMI 0x0100
-
-/*
- * Vendor specific HID device groups
- */
#define HID_GROUP_WACOM 0x0101
+#define HID_GROUP_LOGITECH_DJ_DEVICE 0x0102
/*
* This is the global environment of the parser. This information is
hdev->ll_driver->wait(hdev);
}
+/**
+ * hid_report_len - calculate the report length
+ *
+ * @report: the report we want to know the length
+ */
+static inline int hid_report_len(struct hid_report *report)
+{
+ /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */
+ return ((report->size - 1) >> 3) + 1 + (report->id > 0);
+}
+
int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt);
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern int __khugepaged_enter(struct mm_struct *mm);
extern void __khugepaged_exit(struct mm_struct *mm);
-extern int khugepaged_enter_vma_merge(struct vm_area_struct *vma);
+extern int khugepaged_enter_vma_merge(struct vm_area_struct *vma,
+ unsigned long vm_flags);
#define khugepaged_enabled() \
(transparent_hugepage_flags & \
__khugepaged_exit(mm);
}
-static inline int khugepaged_enter(struct vm_area_struct *vma)
+static inline int khugepaged_enter(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
if (!test_bit(MMF_VM_HUGEPAGE, &vma->vm_mm->flags))
if ((khugepaged_always() ||
- (khugepaged_req_madv() &&
- vma->vm_flags & VM_HUGEPAGE)) &&
- !(vma->vm_flags & VM_NOHUGEPAGE))
+ (khugepaged_req_madv() && (vm_flags & VM_HUGEPAGE))) &&
+ !(vm_flags & VM_NOHUGEPAGE))
if (__khugepaged_enter(vma->vm_mm))
return -ENOMEM;
return 0;
static inline void khugepaged_exit(struct mm_struct *mm)
{
}
-static inline int khugepaged_enter(struct vm_area_struct *vma)
+static inline int khugepaged_enter(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
return 0;
}
-static inline int khugepaged_enter_vma_merge(struct vm_area_struct *vma)
+static inline int khugepaged_enter_vma_merge(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
return 0;
}
return false;
}
-void __mem_cgroup_begin_update_page_stat(struct page *page, bool *locked,
- unsigned long *flags);
-
-extern atomic_t memcg_moving;
-
-static inline void mem_cgroup_begin_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
-{
- if (mem_cgroup_disabled())
- return;
- rcu_read_lock();
- *locked = false;
- if (atomic_read(&memcg_moving))
- __mem_cgroup_begin_update_page_stat(page, locked, flags);
-}
-
-void __mem_cgroup_end_update_page_stat(struct page *page,
- unsigned long *flags);
-static inline void mem_cgroup_end_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
-{
- if (mem_cgroup_disabled())
- return;
- if (*locked)
- __mem_cgroup_end_update_page_stat(page, flags);
- rcu_read_unlock();
-}
-
-void mem_cgroup_update_page_stat(struct page *page,
- enum mem_cgroup_stat_index idx,
- int val);
-
-static inline void mem_cgroup_inc_page_stat(struct page *page,
+struct mem_cgroup *mem_cgroup_begin_page_stat(struct page *page, bool *locked,
+ unsigned long *flags);
+void mem_cgroup_end_page_stat(struct mem_cgroup *memcg, bool locked,
+ unsigned long flags);
+void mem_cgroup_update_page_stat(struct mem_cgroup *memcg,
+ enum mem_cgroup_stat_index idx, int val);
+
+static inline void mem_cgroup_inc_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
- mem_cgroup_update_page_stat(page, idx, 1);
+ mem_cgroup_update_page_stat(memcg, idx, 1);
}
-static inline void mem_cgroup_dec_page_stat(struct page *page,
+static inline void mem_cgroup_dec_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
- mem_cgroup_update_page_stat(page, idx, -1);
+ mem_cgroup_update_page_stat(memcg, idx, -1);
}
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
{
}
-static inline void mem_cgroup_begin_update_page_stat(struct page *page,
+static inline struct mem_cgroup *mem_cgroup_begin_page_stat(struct page *page,
bool *locked, unsigned long *flags)
{
+ return NULL;
}
-static inline void mem_cgroup_end_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
+static inline void mem_cgroup_end_page_stat(struct mem_cgroup *memcg,
+ bool locked, unsigned long flags)
{
}
return false;
}
-static inline void mem_cgroup_inc_page_stat(struct page *page,
+static inline void mem_cgroup_inc_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
}
-static inline void mem_cgroup_dec_page_stat(struct page *page,
+static inline void mem_cgroup_dec_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
}
MAX77693_IRQ_GROUP_NR,
};
+#define SRC_IRQ_CHARGER BIT(0)
+#define SRC_IRQ_TOP BIT(1)
+#define SRC_IRQ_FLASH BIT(2)
+#define SRC_IRQ_MUIC BIT(3)
+#define SRC_IRQ_ALL (SRC_IRQ_CHARGER | SRC_IRQ_TOP \
+ | SRC_IRQ_FLASH | SRC_IRQ_MUIC)
+
#define LED_IRQ_FLED2_OPEN BIT(0)
#define LED_IRQ_FLED2_SHORT BIT(1)
#define LED_IRQ_FLED1_OPEN BIT(2)
int redirty_page_for_writepage(struct writeback_control *wbc,
struct page *page);
void account_page_dirtied(struct page *page, struct address_space *mapping);
-void account_page_writeback(struct page *page);
int set_page_dirty(struct page *page);
int set_page_dirty_lock(struct page *page);
int clear_page_dirty_for_io(struct page *page);
/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
- * @id: the spi_device_id provided by the driver
+ * @name: the chip type name
* @mode: the read mode supported by the driver
*
* The drivers can use this fuction to scan the SPI NOR.
* In the scanning, it will try to get all the necessary information to
* fill the mtd_info{} and the spi_nor{}.
*
- * The board may assigns a spi_device_id with @id which be used to compared with
- * the spi_device_id detected by the scanning.
+ * The chip type name can be provided through the @name parameter.
*
* Return: 0 for success, others for failure.
*/
-int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
- enum read_mode mode);
-extern const struct spi_device_id spi_nor_ids[];
-
-/**
- * spi_nor_match_id() - find the spi_device_id by the name
- * @name: the name of the spi_device_id
- *
- * The drivers use this function to find the spi_device_id
- * specified by the @name.
- *
- * Return: returns the right spi_device_id pointer on success,
- * and returns NULL on failure.
- */
-const struct spi_device_id *spi_nor_match_id(char *name);
+int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
#endif
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
-extern int of_property_read_string_index(struct device_node *np,
- const char *propname,
- int index, const char **output);
extern int of_property_match_string(struct device_node *np,
const char *propname,
const char *string);
-extern int of_property_count_strings(struct device_node *np,
- const char *propname);
+extern int of_property_read_string_helper(struct device_node *np,
+ const char *propname,
+ const char **out_strs, size_t sz, int index);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
return -ENOSYS;
}
-static inline int of_property_read_string_index(struct device_node *np,
- const char *propname, int index,
- const char **out_string)
-{
- return -ENOSYS;
-}
-
-static inline int of_property_count_strings(struct device_node *np,
- const char *propname)
+static inline int of_property_read_string_helper(struct device_node *np,
+ const char *propname,
+ const char **out_strs, size_t sz, int index)
{
return -ENOSYS;
}
return of_property_count_elems_of_size(np, propname, sizeof(u64));
}
+/**
+ * of_property_read_string_array() - Read an array of strings from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_strs: output array of string pointers.
+ * @sz: number of array elements to read.
+ *
+ * Search for a property in a device tree node and retrieve a list of
+ * terminated string values (pointer to data, not a copy) in that property.
+ *
+ * If @out_strs is NULL, the number of strings in the property is returned.
+ */
+static inline int of_property_read_string_array(struct device_node *np,
+ const char *propname, const char **out_strs,
+ size_t sz)
+{
+ return of_property_read_string_helper(np, propname, out_strs, sz, 0);
+}
+
+/**
+ * of_property_count_strings() - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return of_property_read_string_helper(np, propname, NULL, 0, 0);
+}
+
+/**
+ * of_property_read_string_index() - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output)
+{
+ int rc = of_property_read_string_helper(np, propname, output, 1, index);
+ return rc < 0 ? rc : 0;
+}
+
/**
* of_property_read_bool - Findfrom a property
* @np: device node from which the property value is to be read.
};
struct reserved_mem_ops {
- void (*device_init)(struct reserved_mem *rmem,
+ int (*device_init)(struct reserved_mem *rmem,
struct device *dev);
void (*device_release)(struct reserved_mem *rmem,
struct device *dev);
_OF_DECLARE(reservedmem, name, compat, init, reservedmem_of_init_fn)
#ifdef CONFIG_OF_RESERVED_MEM
-void of_reserved_mem_device_init(struct device *dev);
+int of_reserved_mem_device_init(struct device *dev);
void of_reserved_mem_device_release(struct device *dev);
void fdt_init_reserved_mem(void);
void fdt_reserved_mem_save_node(unsigned long node, const char *uname,
phys_addr_t base, phys_addr_t size);
#else
-static inline void of_reserved_mem_device_init(struct device *dev) { }
+static inline int of_reserved_mem_device_init(struct device *dev)
+{
+ return -ENOSYS;
+}
static inline void of_reserved_mem_device_release(struct device *pdev) { }
static inline void fdt_init_reserved_mem(void) { }
if (pci_is_root_bus(pbus))
dev = pbus->bridge;
- else
+ else {
+ /* If pbus is a virtual bus, there is no bridge to it */
+ if (!pbus->self)
+ return NULL;
+
dev = &pbus->self->dev;
+ }
return ACPI_HANDLE(dev);
}
*/
#define RCU_INITIALIZER(v) (typeof(*(v)) __force __rcu *)(v)
+/**
+ * lockless_dereference() - safely load a pointer for later dereference
+ * @p: The pointer to load
+ *
+ * Similar to rcu_dereference(), but for situations where the pointed-to
+ * object's lifetime is managed by something other than RCU. That
+ * "something other" might be reference counting or simple immortality.
+ */
+#define lockless_dereference(p) \
+({ \
+ typeof(p) _________p1 = ACCESS_ONCE(p); \
+ smp_read_barrier_depends(); /* Dependency order vs. p above. */ \
+ (_________p1); \
+})
+
/**
* rcu_assign_pointer() - assign to RCU-protected pointer
* @p: pointer to assign to
__ring_buffer_alloc((size), (flags), &__key); \
})
-int ring_buffer_wait(struct ring_buffer *buffer, int cpu);
+int ring_buffer_wait(struct ring_buffer *buffer, int cpu, bool full);
int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu,
struct file *filp, poll_table *poll_table);
/* fields enclosed in headers_start/headers_end are copied
* using a single memcpy() in __copy_skb_header()
*/
+ /* private: */
__u32 headers_start[0];
+ /* public: */
/* if you move pkt_type around you also must adapt those constants */
#ifdef __BIG_ENDIAN_BITFIELD
__u16 network_header;
__u16 mac_header;
+ /* private: */
__u32 headers_end[0];
+ /* public: */
/* These elements must be at the end, see alloc_skb() for details. */
sk_buff_data_t tail;
* @skb: buffer
*
* Returns true is skb is a fast clone, and its clone is not freed.
+ * Some drivers call skb_orphan() in their ndo_start_xmit(),
+ * so we also check that this didnt happen.
*/
-static inline bool skb_fclone_busy(const struct sk_buff *skb)
+static inline bool skb_fclone_busy(const struct sock *sk,
+ const struct sk_buff *skb)
{
const struct sk_buff_fclones *fclones;
fclones = container_of(skb, struct sk_buff_fclones, skb1);
return skb->fclone == SKB_FCLONE_ORIG &&
- fclones->skb2.fclone == SKB_FCLONE_CLONE;
+ fclones->skb2.fclone == SKB_FCLONE_CLONE &&
+ fclones->skb2.sk == sk;
}
static inline struct sk_buff *alloc_skb_fclone(unsigned int size,
# define EVENT_NO_RUNTIME_PM 9
# define EVENT_RX_KILL 10
# define EVENT_LINK_CHANGE 11
+# define EVENT_SET_RX_MODE 12
};
static inline struct usb_driver *driver_of(struct usb_interface *intf)
/* called by minidriver when receiving indication */
void (*indication)(struct usbnet *dev, void *ind, int indlen);
+ /* rx mode change (device changes address list filtering) */
+ void (*set_rx_mode)(struct usbnet *dev);
+
/* for new devices, use the descriptor-reading code instead */
int in; /* rx endpoint */
int out; /* tx endpoint */
return __ipv6_addr_diff(a1, a2, sizeof(struct in6_addr));
}
+void ipv6_proxy_select_ident(struct sk_buff *skb);
+
int ip6_dst_hoplimit(struct dst_entry *dst);
static inline int ip6_sk_dst_hoplimit(struct ipv6_pinfo *np, struct flowi6 *fl6,
#ifndef _IPV4_NF_REJECT_H
#define _IPV4_NF_REJECT_H
+#include <linux/skbuff.h>
+#include <net/ip.h>
#include <net/icmp.h>
static inline void nf_send_unreach(struct sk_buff *skb_in, int code)
void nf_send_reset(struct sk_buff *oldskb, int hook);
+const struct tcphdr *nf_reject_ip_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *_oth, int hook);
+struct iphdr *nf_reject_iphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int ttl);
+void nf_reject_ip_tcphdr_put(struct sk_buff *nskb, const struct sk_buff *oldskb,
+ const struct tcphdr *oth);
+
#endif /* _IPV4_NF_REJECT_H */
void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook);
+const struct tcphdr *nf_reject_ip6_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *otcph,
+ unsigned int *otcplen, int hook);
+struct ipv6hdr *nf_reject_ip6hdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int hoplimit);
+void nf_reject_ip6_tcphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ const struct tcphdr *oth, unsigned int otcplen);
+
#endif /* _IPV6_NF_REJECT_H */
NFT_CHAIN_T_MAX
};
+int nft_chain_validate_dependency(const struct nft_chain *chain,
+ enum nft_chain_type type);
+
struct nft_stats {
u64 bytes;
u64 pkts;
int nft_masq_dump(struct sk_buff *skb, const struct nft_expr *expr);
+int nft_masq_validate(const struct nft_ctx *ctx, const struct nft_expr *expr,
+ const struct nft_data **data);
+
#endif /* _NFT_MASQ_H_ */
if (!sdev->tagged_supported)
return;
- if (!shost_use_blk_mq(sdev->host) &&
- !blk_queue_tagged(sdev->request_queue))
+ if (shost_use_blk_mq(sdev->host))
+ queue_flag_set_unlocked(QUEUE_FLAG_QUEUED, sdev->request_queue);
+ else if (!blk_queue_tagged(sdev->request_queue))
blk_queue_init_tags(sdev->request_queue, depth,
sdev->host->bqt);
**/
static inline void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
{
- if (!shost_use_blk_mq(sdev->host) &&
- blk_queue_tagged(sdev->request_queue))
+ if (blk_queue_tagged(sdev->request_queue))
blk_queue_free_tags(sdev->request_queue);
scsi_adjust_queue_depth(sdev, 0, depth);
}
/*
* Tracepoint for _rcu_barrier() execution. The string "s" describes
* the _rcu_barrier phase:
- * "Begin": rcu_barrier_callback() started.
- * "Check": rcu_barrier_callback() checking for piggybacking.
- * "EarlyExit": rcu_barrier_callback() piggybacked, thus early exit.
- * "Inc1": rcu_barrier_callback() piggyback check counter incremented.
- * "Offline": rcu_barrier_callback() found offline CPU
- * "OnlineNoCB": rcu_barrier_callback() found online no-CBs CPU.
- * "OnlineQ": rcu_barrier_callback() found online CPU with callbacks.
- * "OnlineNQ": rcu_barrier_callback() found online CPU, no callbacks.
+ * "Begin": _rcu_barrier() started.
+ * "Check": _rcu_barrier() checking for piggybacking.
+ * "EarlyExit": _rcu_barrier() piggybacked, thus early exit.
+ * "Inc1": _rcu_barrier() piggyback check counter incremented.
+ * "OfflineNoCB": _rcu_barrier() found callback on never-online CPU
+ * "OnlineNoCB": _rcu_barrier() found online no-CBs CPU.
+ * "OnlineQ": _rcu_barrier() found online CPU with callbacks.
+ * "OnlineNQ": _rcu_barrier() found online CPU, no callbacks.
* "IRQ": An rcu_barrier_callback() callback posted on remote CPU.
* "CB": An rcu_barrier_callback() invoked a callback, not the last.
* "LastCB": An rcu_barrier_callback() invoked the last callback.
- * "Inc2": rcu_barrier_callback() piggyback check counter incremented.
+ * "Inc2": _rcu_barrier() piggyback check counter incremented.
* The "cpu" argument is the CPU or -1 if meaningless, the "cnt" argument
* is the count of remaining callbacks, and "done" is the piggybacking count.
*/
/*
* Bits needed to read the hw events in user-space.
*
- * u32 seq, time_mult, time_shift, idx, width;
+ * u32 seq, time_mult, time_shift, index, width;
* u64 count, enabled, running;
* u64 cyc, time_offset;
* s64 pmc = 0;
* time_shift = pc->time_shift;
* }
*
- * idx = pc->index;
+ * index = pc->index;
* count = pc->offset;
- * if (pc->cap_usr_rdpmc && idx) {
+ * if (pc->cap_user_rdpmc && index) {
* width = pc->pmc_width;
- * pmc = rdpmc(idx - 1);
+ * pmc = rdpmc(index - 1);
* }
*
* barrier();
};
/*
- * If cap_usr_rdpmc this field provides the bit-width of the value
+ * If cap_user_rdpmc this field provides the bit-width of the value
* read using the rdpmc() or equivalent instruction. This can be used
* to sign extend the result like:
*
*
* Where time_offset,time_mult,time_shift and cyc are read in the
* seqcount loop described above. This delta can then be added to
- * enabled and possible running (if idx), improving the scaling:
+ * enabled and possible running (if index), improving the scaling:
*
* enabled += delta;
- * if (idx)
+ * if (index)
* running += delta;
*
* quot = count / running;
#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */
#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */
#define CLONE_THREAD 0x00010000 /* Same thread group? */
-#define CLONE_NEWNS 0x00020000 /* New namespace group? */
+#define CLONE_NEWNS 0x00020000 /* New mount namespace group */
#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */
#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */
#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */
config HAVE_PCSPKR_PLATFORM
bool
+# interpreter that classic socket filters depend on
+config BPF
+ bool
+
menuconfig EXPERT
bool "Configure standard kernel features (expert users)"
# Unhide debug options, to make the on-by-default options visible
If unsure, say Y.
+# syscall, maps, verifier
+config BPF_SYSCALL
+ bool "Enable bpf() system call" if EXPERT
+ select ANON_INODES
+ select BPF
+ default n
+ help
+ Enable the bpf() system call that allows to manipulate eBPF
+ programs and maps via file descriptors.
+
config SHMEM
bool "Use full shmem filesystem" if EXPERT
default y
static_command_line, __start___param,
__stop___param - __start___param,
-1, -1, &unknown_bootoption);
- if (after_dashes)
+ if (!IS_ERR_OR_NULL(after_dashes))
parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
set_init_arg);
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_IRQ_WORK) += irq_work.o
obj-$(CONFIG_CPU_PM) += cpu_pm.o
-obj-$(CONFIG_NET) += bpf/
+obj-$(CONFIG_BPF) += bpf/
obj-$(CONFIG_PERF_EVENTS) += events/
ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_FEATURE_CHANGE);
audit_log_task_info(ab, current);
- audit_log_format(ab, "feature=%s old=%u new=%u old_lock=%u new_lock=%u res=%d",
+ audit_log_format(ab, " feature=%s old=%u new=%u old_lock=%u new_lock=%u res=%d",
audit_feature_names[which], !!old_feature, !!new_feature,
!!old_lock, !!new_lock, res);
audit_log_end(ab);
chunk->owners[i].index = i;
}
fsnotify_init_mark(&chunk->mark, audit_tree_destroy_watch);
+ chunk->mark.mask = FS_IN_IGNORED;
return chunk;
}
-obj-y := core.o syscall.o verifier.o
-
+obj-y := core.o
+obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o
ifdef CONFIG_TEST_BPF
-obj-y += test_stub.o
+obj-$(CONFIG_BPF_SYSCALL) += test_stub.o
endif
schedule_work(&aux->work);
}
EXPORT_SYMBOL_GPL(bpf_prog_free);
+
+/* To execute LD_ABS/LD_IND instructions __bpf_prog_run() may call
+ * skb_copy_bits(), so provide a weak definition of it for NET-less config.
+ */
+int __weak skb_copy_bits(const struct sk_buff *skb, int offset, void *to,
+ int len)
+{
+ return -EFAULT;
+}
if (memcmp(&old->regs[i], &cur->regs[i],
sizeof(old->regs[0])) != 0) {
if (old->regs[i].type == NOT_INIT ||
- old->regs[i].type == UNKNOWN_VALUE)
+ (old->regs[i].type == UNKNOWN_VALUE &&
+ cur->regs[i].type != NOT_INIT))
continue;
return false;
}
}
NOKPROBE_SYMBOL(context_tracking_user_enter);
-#ifdef CONFIG_PREEMPT
-/**
- * preempt_schedule_context - preempt_schedule called by tracing
- *
- * The tracing infrastructure uses preempt_enable_notrace to prevent
- * recursion and tracing preempt enabling caused by the tracing
- * infrastructure itself. But as tracing can happen in areas coming
- * from userspace or just about to enter userspace, a preempt enable
- * can occur before user_exit() is called. This will cause the scheduler
- * to be called when the system is still in usermode.
- *
- * To prevent this, the preempt_enable_notrace will use this function
- * instead of preempt_schedule() to exit user context if needed before
- * calling the scheduler.
- */
-asmlinkage __visible void __sched notrace preempt_schedule_context(void)
-{
- enum ctx_state prev_ctx;
-
- if (likely(!preemptible()))
- return;
-
- /*
- * Need to disable preemption in case user_exit() is traced
- * and the tracer calls preempt_enable_notrace() causing
- * an infinite recursion.
- */
- preempt_disable_notrace();
- prev_ctx = exception_enter();
- preempt_enable_no_resched_notrace();
-
- preempt_schedule();
-
- preempt_disable_notrace();
- exception_exit(prev_ctx);
- preempt_enable_notrace();
-}
-EXPORT_SYMBOL_GPL(preempt_schedule_context);
-#endif /* CONFIG_PREEMPT */
-
/**
* context_tracking_user_exit - Inform the context tracking that the CPU is
* exiting userspace mode and entering the kernel.
* an ongoing cpu hotplug operation.
*/
int refcount;
+ /* And allows lockless put_online_cpus(). */
+ atomic_t puts_pending;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
{
if (cpu_hotplug.active_writer == current)
return;
- mutex_lock(&cpu_hotplug.lock);
+ if (!mutex_trylock(&cpu_hotplug.lock)) {
+ atomic_inc(&cpu_hotplug.puts_pending);
+ cpuhp_lock_release();
+ return;
+ }
if (WARN_ON(!cpu_hotplug.refcount))
cpu_hotplug.refcount++; /* try to fix things up */
cpuhp_lock_acquire();
for (;;) {
mutex_lock(&cpu_hotplug.lock);
+ if (atomic_read(&cpu_hotplug.puts_pending)) {
+ int delta;
+
+ delta = atomic_xchg(&cpu_hotplug.puts_pending, 0);
+ cpu_hotplug.refcount -= delta;
+ }
if (likely(!cpu_hotplug.refcount))
break;
__set_current_state(TASK_UNINTERRUPTIBLE);
return 0;
}
-static int perf_swevent_event_idx(struct perf_event *event)
-{
- return 0;
-}
-
static struct pmu perf_swevent = {
.task_ctx_nr = perf_sw_context,
.start = perf_swevent_start,
.stop = perf_swevent_stop,
.read = perf_swevent_read,
-
- .event_idx = perf_swevent_event_idx,
};
#ifdef CONFIG_EVENT_TRACING
.start = perf_swevent_start,
.stop = perf_swevent_stop,
.read = perf_swevent_read,
-
- .event_idx = perf_swevent_event_idx,
};
static inline void perf_tp_register(void)
.start = cpu_clock_event_start,
.stop = cpu_clock_event_stop,
.read = cpu_clock_event_read,
-
- .event_idx = perf_swevent_event_idx,
};
/*
.start = task_clock_event_start,
.stop = task_clock_event_stop,
.read = task_clock_event_read,
-
- .event_idx = perf_swevent_event_idx,
};
static void perf_pmu_nop_void(struct pmu *pmu)
static int perf_event_idx_default(struct perf_event *event)
{
- return event->hw.idx + 1;
+ return 0;
}
/*
bp->hw.state = PERF_HES_STOPPED;
}
-static int hw_breakpoint_event_idx(struct perf_event *bp)
-{
- return 0;
-}
-
static struct pmu perf_breakpoint = {
.task_ctx_nr = perf_sw_context, /* could eventually get its own */
.start = hw_breakpoint_start,
.stop = hw_breakpoint_stop,
.read = hw_breakpoint_pmu_read,
-
- .event_idx = hw_breakpoint_event_idx,
};
int __init init_hw_breakpoint(void)
*
* Where (A) orders the waiters increment and the futex value read through
* atomic operations (see hb_waiters_inc) and where (B) orders the write
- * to futex and the waiters read -- this is done by the barriers in
- * get_futex_key_refs(), through either ihold or atomic_inc, depending on the
- * futex type.
+ * to futex and the waiters read -- this is done by the barriers for both
+ * shared and private futexes in get_futex_key_refs().
*
* This yields the following case (where X:=waiters, Y:=futex):
*
futex_get_mm(key); /* implies MB (B) */
break;
default:
+ /*
+ * Private futexes do not hold reference on an inode or
+ * mm, therefore the only purpose of calling get_futex_key_refs
+ * is because we need the barrier for the lockless waiter check.
+ */
smp_mb(); /* explicit MB (B) */
}
}
/*
* Drop a reference to the resource addressed by a key.
- * The hash bucket spinlock must not be held.
+ * The hash bucket spinlock must not be held. This is
+ * a no-op for private futexes, see comment in the get
+ * counterpart.
*/
static void drop_futex_key_refs(union futex_key *key)
{
return pi_state;
}
+/*
+ * Must be called with the hb lock held.
+ */
static void free_pi_state(struct futex_pi_state *pi_state)
{
+ if (!pi_state)
+ return;
+
if (!atomic_dec_and_test(&pi_state->refcount))
return;
}
retry:
- if (pi_state != NULL) {
- /*
- * We will have to lookup the pi_state again, so free this one
- * to keep the accounting correct.
- */
- free_pi_state(pi_state);
- pi_state = NULL;
- }
-
ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
case 0:
break;
case -EFAULT:
+ free_pi_state(pi_state);
+ pi_state = NULL;
double_unlock_hb(hb1, hb2);
hb_waiters_dec(hb2);
put_futex_key(&key2);
* exit to complete.
* - The user space value changed.
*/
+ free_pi_state(pi_state);
+ pi_state = NULL;
double_unlock_hb(hb1, hb2);
hb_waiters_dec(hb2);
put_futex_key(&key2);
}
out_unlock:
+ free_pi_state(pi_state);
double_unlock_hb(hb1, hb2);
hb_waiters_dec(hb2);
out_put_key1:
put_futex_key(&key1);
out:
- if (pi_state != NULL)
- free_pi_state(pi_state);
return ret ? ret : task_count;
}
config GCOV_PROFILE_ALL
bool "Profile entire Kernel"
depends on GCOV_KERNEL
- depends on SUPERH || S390 || X86 || PPC || MICROBLAZE || ARM
+ depends on SUPERH || S390 || X86 || PPC || MICROBLAZE || ARM || ARM64
default n
---help---
This options activates profiling for the entire kernel.
EXPORT_SYMBOL(__request_module);
#endif /* CONFIG_MODULES */
+static void call_usermodehelper_freeinfo(struct subprocess_info *info)
+{
+ if (info->cleanup)
+ (*info->cleanup)(info);
+ kfree(info);
+}
+
+static void umh_complete(struct subprocess_info *sub_info)
+{
+ struct completion *comp = xchg(&sub_info->complete, NULL);
+ /*
+ * See call_usermodehelper_exec(). If xchg() returns NULL
+ * we own sub_info, the UMH_KILLABLE caller has gone away
+ * or the caller used UMH_NO_WAIT.
+ */
+ if (comp)
+ complete(comp);
+ else
+ call_usermodehelper_freeinfo(sub_info);
+}
+
/*
* This is the task which runs the usermode application
*/
static int ____call_usermodehelper(void *data)
{
struct subprocess_info *sub_info = data;
+ int wait = sub_info->wait & ~UMH_KILLABLE;
struct cred *new;
int retval;
retval = -ENOMEM;
new = prepare_kernel_cred(current);
if (!new)
- goto fail;
+ goto out;
spin_lock(&umh_sysctl_lock);
new->cap_bset = cap_intersect(usermodehelper_bset, new->cap_bset);
retval = sub_info->init(sub_info, new);
if (retval) {
abort_creds(new);
- goto fail;
+ goto out;
}
}
retval = do_execve(getname_kernel(sub_info->path),
(const char __user *const __user *)sub_info->argv,
(const char __user *const __user *)sub_info->envp);
+out:
+ sub_info->retval = retval;
+ /* wait_for_helper() will call umh_complete if UHM_WAIT_PROC. */
+ if (wait != UMH_WAIT_PROC)
+ umh_complete(sub_info);
if (!retval)
return 0;
-
- /* Exec failed? */
-fail:
- sub_info->retval = retval;
do_exit(0);
}
return ____call_usermodehelper(data);
}
-static void call_usermodehelper_freeinfo(struct subprocess_info *info)
-{
- if (info->cleanup)
- (*info->cleanup)(info);
- kfree(info);
-}
-
-static void umh_complete(struct subprocess_info *sub_info)
-{
- struct completion *comp = xchg(&sub_info->complete, NULL);
- /*
- * See call_usermodehelper_exec(). If xchg() returns NULL
- * we own sub_info, the UMH_KILLABLE caller has gone away.
- */
- if (comp)
- complete(comp);
- else
- call_usermodehelper_freeinfo(sub_info);
-}
-
/* Keventd can't block, but this (a child) can. */
static int wait_for_helper(void *data)
{
kmod_thread_locker = NULL;
}
- switch (wait) {
- case UMH_NO_WAIT:
- call_usermodehelper_freeinfo(sub_info);
- break;
-
- case UMH_WAIT_PROC:
- if (pid > 0)
- break;
- /* FALLTHROUGH */
- case UMH_WAIT_EXEC:
- if (pid < 0)
- sub_info->retval = pid;
+ if (pid < 0) {
+ sub_info->retval = pid;
umh_complete(sub_info);
}
}
goto out;
}
- sub_info->complete = &done;
+ /*
+ * Set the completion pointer only if there is a waiter.
+ * This makes it possible to use umh_complete to free
+ * the data structure in case of UMH_NO_WAIT.
+ */
+ sub_info->complete = (wait == UMH_NO_WAIT) ? NULL : &done;
sub_info->wait = wait;
queue_work(khelper_wq, &sub_info->work);
error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
error = resume_target_kernel(platform_mode);
- dpm_resume_end(PMSG_RECOVER);
+ /*
+ * The above should either succeed and jump to the new kernel,
+ * or return with an error. Otherwise things are just
+ * undefined, so let's be paranoid.
+ */
+ BUG_ON(!error);
}
+ dpm_resume_end(PMSG_RECOVER);
pm_restore_gfp_mask();
resume_console();
pm_restore_console();
continue;
rdp = per_cpu_ptr(rsp->rda, cpu);
if (rcu_is_nocb_cpu(cpu)) {
- _rcu_barrier_trace(rsp, "OnlineNoCB", cpu,
- rsp->n_barrier_done);
- atomic_inc(&rsp->barrier_cpu_count);
- __call_rcu(&rdp->barrier_head, rcu_barrier_callback,
- rsp, cpu, 0);
+ if (!rcu_nocb_cpu_needs_barrier(rsp, cpu)) {
+ _rcu_barrier_trace(rsp, "OfflineNoCB", cpu,
+ rsp->n_barrier_done);
+ } else {
+ _rcu_barrier_trace(rsp, "OnlineNoCB", cpu,
+ rsp->n_barrier_done);
+ atomic_inc(&rsp->barrier_cpu_count);
+ __call_rcu(&rdp->barrier_head,
+ rcu_barrier_callback, rsp, cpu, 0);
+ }
} else if (ACCESS_ONCE(rdp->qlen)) {
_rcu_barrier_trace(rsp, "OnlineQ", cpu,
rsp->n_barrier_done);
static void print_cpu_stall_info_end(void);
static void zero_cpu_stall_ticks(struct rcu_data *rdp);
static void increment_cpu_stall_ticks(void);
+static bool rcu_nocb_cpu_needs_barrier(struct rcu_state *rsp, int cpu);
static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq);
static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp);
static void rcu_init_one_nocb(struct rcu_node *rnp);
}
}
+/*
+ * Does the specified CPU need an RCU callback for the specified flavor
+ * of rcu_barrier()?
+ */
+static bool rcu_nocb_cpu_needs_barrier(struct rcu_state *rsp, int cpu)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
+ struct rcu_head *rhp;
+
+ /* No-CBs CPUs might have callbacks on any of three lists. */
+ rhp = ACCESS_ONCE(rdp->nocb_head);
+ if (!rhp)
+ rhp = ACCESS_ONCE(rdp->nocb_gp_head);
+ if (!rhp)
+ rhp = ACCESS_ONCE(rdp->nocb_follower_head);
+
+ /* Having no rcuo kthread but CBs after scheduler starts is bad! */
+ if (!ACCESS_ONCE(rdp->nocb_kthread) && rhp) {
+ /* RCU callback enqueued before CPU first came online??? */
+ pr_err("RCU: Never-onlined no-CBs CPU %d has CB %p\n",
+ cpu, rhp->func);
+ WARN_ON_ONCE(1);
+ }
+
+ return !!rhp;
+}
+
/*
* Enqueue the specified string of rcu_head structures onto the specified
* CPU's no-CBs lists. The CPU is specified by rdp, the head of the
#else /* #ifdef CONFIG_RCU_NOCB_CPU */
+static bool rcu_nocb_cpu_needs_barrier(struct rcu_state *rsp, int cpu)
+{
+ WARN_ON_ONCE(1); /* Should be dead code. */
+ return false;
+}
+
static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp)
{
}
}
NOKPROBE_SYMBOL(preempt_schedule);
EXPORT_SYMBOL(preempt_schedule);
+
+#ifdef CONFIG_CONTEXT_TRACKING
+/**
+ * preempt_schedule_context - preempt_schedule called by tracing
+ *
+ * The tracing infrastructure uses preempt_enable_notrace to prevent
+ * recursion and tracing preempt enabling caused by the tracing
+ * infrastructure itself. But as tracing can happen in areas coming
+ * from userspace or just about to enter userspace, a preempt enable
+ * can occur before user_exit() is called. This will cause the scheduler
+ * to be called when the system is still in usermode.
+ *
+ * To prevent this, the preempt_enable_notrace will use this function
+ * instead of preempt_schedule() to exit user context if needed before
+ * calling the scheduler.
+ */
+asmlinkage __visible void __sched notrace preempt_schedule_context(void)
+{
+ enum ctx_state prev_ctx;
+
+ if (likely(!preemptible()))
+ return;
+
+ do {
+ __preempt_count_add(PREEMPT_ACTIVE);
+ /*
+ * Needs preempt disabled in case user_exit() is traced
+ * and the tracer calls preempt_enable_notrace() causing
+ * an infinite recursion.
+ */
+ prev_ctx = exception_enter();
+ __schedule();
+ exception_exit(prev_ctx);
+
+ __preempt_count_sub(PREEMPT_ACTIVE);
+ barrier();
+ } while (need_resched());
+}
+EXPORT_SYMBOL_GPL(preempt_schedule_context);
+#endif /* CONFIG_CONTEXT_TRACKING */
+
#endif /* CONFIG_PREEMPT */
/*
sched_offline_group(tg);
}
+static void cpu_cgroup_fork(struct task_struct *task)
+{
+ sched_move_task(task);
+}
+
static int cpu_cgroup_can_attach(struct cgroup_subsys_state *css,
struct cgroup_taskset *tset)
{
.css_free = cpu_cgroup_css_free,
.css_online = cpu_cgroup_css_online,
.css_offline = cpu_cgroup_css_offline,
+ .fork = cpu_cgroup_fork,
.can_attach = cpu_cgroup_can_attach,
.attach = cpu_cgroup_attach,
.exit = cpu_cgroup_exit,
}
/*
- * We need to take care of a possible races here. In fact, the
- * task might have changed its scheduling policy to something
- * different from SCHED_DEADLINE or changed its reservation
- * parameters (through sched_setattr()).
+ * We need to take care of several possible races here:
+ *
+ * - the task might have changed its scheduling policy
+ * to something different than SCHED_DEADLINE
+ * - the task might have changed its reservation parameters
+ * (through sched_setattr())
+ * - the task might have been boosted by someone else and
+ * might be in the boosting/deboosting path
+ *
+ * In all this cases we bail out, as the task is already
+ * in the runqueue or is going to be enqueued back anyway.
*/
- if (!dl_task(p) || dl_se->dl_new)
+ if (!dl_task(p) || dl_se->dl_new ||
+ dl_se->dl_boosted || !dl_se->dl_throttled)
goto unlock;
sched_clock_tick();
dl_se->dl_yielded = 0;
if (task_on_rq_queued(p)) {
enqueue_task_dl(rq, p, ENQUEUE_REPLENISH);
- if (task_has_dl_policy(rq->curr))
+ if (dl_task(rq->curr))
check_preempt_curr_dl(rq, p, 0);
else
resched_curr(rq);
* smaller than our one... OTW we keep our runtime and
* deadline.
*/
- if (pi_task && p->dl.dl_boosted && dl_prio(pi_task->normal_prio))
+ if (pi_task && p->dl.dl_boosted && dl_prio(pi_task->normal_prio)) {
pi_se = &pi_task->dl;
+ } else if (!dl_prio(p->normal_prio)) {
+ /*
+ * Special case in which we have a !SCHED_DEADLINE task
+ * that is going to be deboosted, but exceedes its
+ * runtime while doing so. No point in replenishing
+ * it, as it's going to return back to its original
+ * scheduling class after this.
+ */
+ BUG_ON(!p->dl.dl_boosted || flags != ENQUEUE_REPLENISH);
+ return;
+ }
/*
* If p is throttled, we do nothing. In fact, if it exhausted
/* Only reschedule if pushing failed */
check_resched = 0;
#endif /* CONFIG_SMP */
- if (check_resched && task_has_dl_policy(rq->curr))
- check_preempt_curr_dl(rq, p, 0);
+ if (check_resched) {
+ if (dl_task(rq->curr))
+ check_preempt_curr_dl(rq, p, 0);
+ else
+ resched_curr(rq);
+ }
}
}
static unsigned int task_scan_min(struct task_struct *p)
{
+ unsigned int scan_size = ACCESS_ONCE(sysctl_numa_balancing_scan_size);
unsigned int scan, floor;
unsigned int windows = 1;
- if (sysctl_numa_balancing_scan_size < MAX_SCAN_WINDOW)
- windows = MAX_SCAN_WINDOW / sysctl_numa_balancing_scan_size;
+ if (scan_size < MAX_SCAN_WINDOW)
+ windows = MAX_SCAN_WINDOW / scan_size;
floor = 1000 / windows;
scan = sysctl_numa_balancing_scan_period_min / task_nr_scan_windows(p);
long moveimp = imp;
rcu_read_lock();
- cur = ACCESS_ONCE(dst_rq->curr);
- if (cur->pid == 0) /* idle */
+
+ raw_spin_lock_irq(&dst_rq->lock);
+ cur = dst_rq->curr;
+ /*
+ * No need to move the exiting task, and this ensures that ->curr
+ * wasn't reaped and thus get_task_struct() in task_numa_assign()
+ * is safe under RCU read lock.
+ * Note that rcu_read_lock() itself can't protect from the final
+ * put_task_struct() after the last schedule().
+ */
+ if ((cur->flags & PF_EXITING) || is_idle_task(cur))
cur = NULL;
+ raw_spin_unlock_irq(&dst_rq->lock);
/*
* "imp" is the fault differential for the source task between the
* scanning faster if shared accesses dominate as it may
* simply bounce migrations uselessly
*/
- ratio = DIV_ROUND_UP(private * NUMA_PERIOD_SLOTS, (private + shared));
+ ratio = DIV_ROUND_UP(private * NUMA_PERIOD_SLOTS, (private + shared + 1));
diff = (diff * ratio) / NUMA_PERIOD_SLOTS;
}
.data = &sysctl_numa_balancing_scan_size,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &one,
},
{
.procname = "numa_balancing",
* Also omit the add if it would overflow the u64 boundary.
*/
if ((~0ULL - clc > rnd) &&
- (!ismax || evt->mult <= (1U << evt->shift)))
+ (!ismax || evt->mult <= (1ULL << evt->shift)))
clc += rnd;
do_div(clc, evt->mult);
goto out;
}
} else {
+ memset(&event.sigev_value, 0, sizeof(event.sigev_value));
event.sigev_notify = SIGEV_SIGNAL;
event.sigev_signo = SIGALRM;
event.sigev_value.sival_int = new_timer->it_id;
* ring_buffer_wait - wait for input to the ring buffer
* @buffer: buffer to wait on
* @cpu: the cpu buffer to wait on
+ * @full: wait until a full page is available, if @cpu != RING_BUFFER_ALL_CPUS
*
* If @cpu == RING_BUFFER_ALL_CPUS then the task will wake up as soon
* as data is added to any of the @buffer's cpu buffers. Otherwise
* it will wait for data to be added to a specific cpu buffer.
*/
-int ring_buffer_wait(struct ring_buffer *buffer, int cpu)
+int ring_buffer_wait(struct ring_buffer *buffer, int cpu, bool full)
{
- struct ring_buffer_per_cpu *cpu_buffer;
+ struct ring_buffer_per_cpu *uninitialized_var(cpu_buffer);
DEFINE_WAIT(wait);
struct rb_irq_work *work;
+ int ret = 0;
/*
* Depending on what the caller is waiting for, either any
}
- prepare_to_wait(&work->waiters, &wait, TASK_INTERRUPTIBLE);
+ while (true) {
+ prepare_to_wait(&work->waiters, &wait, TASK_INTERRUPTIBLE);
- /*
- * The events can happen in critical sections where
- * checking a work queue can cause deadlocks.
- * After adding a task to the queue, this flag is set
- * only to notify events to try to wake up the queue
- * using irq_work.
- *
- * We don't clear it even if the buffer is no longer
- * empty. The flag only causes the next event to run
- * irq_work to do the work queue wake up. The worse
- * that can happen if we race with !trace_empty() is that
- * an event will cause an irq_work to try to wake up
- * an empty queue.
- *
- * There's no reason to protect this flag either, as
- * the work queue and irq_work logic will do the necessary
- * synchronization for the wake ups. The only thing
- * that is necessary is that the wake up happens after
- * a task has been queued. It's OK for spurious wake ups.
- */
- work->waiters_pending = true;
+ /*
+ * The events can happen in critical sections where
+ * checking a work queue can cause deadlocks.
+ * After adding a task to the queue, this flag is set
+ * only to notify events to try to wake up the queue
+ * using irq_work.
+ *
+ * We don't clear it even if the buffer is no longer
+ * empty. The flag only causes the next event to run
+ * irq_work to do the work queue wake up. The worse
+ * that can happen if we race with !trace_empty() is that
+ * an event will cause an irq_work to try to wake up
+ * an empty queue.
+ *
+ * There's no reason to protect this flag either, as
+ * the work queue and irq_work logic will do the necessary
+ * synchronization for the wake ups. The only thing
+ * that is necessary is that the wake up happens after
+ * a task has been queued. It's OK for spurious wake ups.
+ */
+ work->waiters_pending = true;
+
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ break;
+ }
+
+ if (cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer))
+ break;
+
+ if (cpu != RING_BUFFER_ALL_CPUS &&
+ !ring_buffer_empty_cpu(buffer, cpu)) {
+ unsigned long flags;
+ bool pagebusy;
+
+ if (!full)
+ break;
+
+ raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
+ pagebusy = cpu_buffer->reader_page == cpu_buffer->commit_page;
+ raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+
+ if (!pagebusy)
+ break;
+ }
- if ((cpu == RING_BUFFER_ALL_CPUS && ring_buffer_empty(buffer)) ||
- (cpu != RING_BUFFER_ALL_CPUS && ring_buffer_empty_cpu(buffer, cpu)))
schedule();
+ }
finish_wait(&work->waiters, &wait);
- return 0;
+
+ return ret;
}
/**
}
#endif /* CONFIG_TRACER_MAX_TRACE */
-static int wait_on_pipe(struct trace_iterator *iter)
+static int wait_on_pipe(struct trace_iterator *iter, bool full)
{
/* Iterators are static, they should be filled or empty */
if (trace_buffer_iter(iter, iter->cpu_file))
return 0;
- return ring_buffer_wait(iter->trace_buffer->buffer, iter->cpu_file);
+ return ring_buffer_wait(iter->trace_buffer->buffer, iter->cpu_file,
+ full);
}
#ifdef CONFIG_FTRACE_STARTUP_TEST
mutex_unlock(&iter->mutex);
- ret = wait_on_pipe(iter);
+ ret = wait_on_pipe(iter, false);
mutex_lock(&iter->mutex);
if (ret)
return ret;
-
- if (signal_pending(current))
- return -EINTR;
}
return 1;
goto out_unlock;
}
mutex_unlock(&trace_types_lock);
- ret = wait_on_pipe(iter);
+ ret = wait_on_pipe(iter, false);
mutex_lock(&trace_types_lock);
if (ret) {
size = ret;
goto out_unlock;
}
- if (signal_pending(current)) {
- size = -EINTR;
- goto out_unlock;
- }
goto again;
}
size = 0;
};
struct buffer_ref *ref;
int entries, size, i;
- ssize_t ret;
+ ssize_t ret = 0;
mutex_lock(&trace_types_lock);
int r;
ref = kzalloc(sizeof(*ref), GFP_KERNEL);
- if (!ref)
+ if (!ref) {
+ ret = -ENOMEM;
break;
+ }
ref->ref = 1;
ref->buffer = iter->trace_buffer->buffer;
ref->page = ring_buffer_alloc_read_page(ref->buffer, iter->cpu_file);
if (!ref->page) {
+ ret = -ENOMEM;
kfree(ref);
break;
}
/* did we read anything? */
if (!spd.nr_pages) {
+ if (ret)
+ goto out;
+
if ((file->f_flags & O_NONBLOCK) || (flags & SPLICE_F_NONBLOCK)) {
ret = -EAGAIN;
goto out;
}
mutex_unlock(&trace_types_lock);
- ret = wait_on_pipe(iter);
+ ret = wait_on_pipe(iter, true);
mutex_lock(&trace_types_lock);
if (ret)
goto out;
- if (signal_pending(current)) {
- ret = -EINTR;
- goto out;
- }
+
goto again;
}
int size;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
/* Here we're inside tp handler's rcu_read_lock_sched (__DO_TRACE) */
int syscall_nr;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
/* Here we're inside tp handler's rcu_read_lock_sched (__DO_TRACE()) */
int size;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
if (!test_bit(syscall_nr, enabled_perf_enter_syscalls))
return;
int size;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
if (!test_bit(syscall_nr, enabled_perf_exit_syscalls))
return;
lower = src[off + k];
if (left && off + k == lim - 1)
lower &= mask;
- dst[k] = upper << (BITS_PER_LONG - rem) | lower >> rem;
+ dst[k] = lower >> rem;
+ if (rem)
+ dst[k] |= upper << (BITS_PER_LONG - rem);
if (left && k == lim - 1)
dst[k] &= mask;
}
upper = src[k];
if (left && k == lim - 1)
upper &= (1UL << left) - 1;
- dst[k + off] = lower >> (BITS_PER_LONG - rem) | upper << rem;
+ dst[k + off] = upper << rem;
+ if (rem)
+ dst[k + off] |= lower >> (BITS_PER_LONG - rem);
if (left && k + off == lim - 1)
dst[k + off] &= (1UL << left) - 1;
}
}
table->orig_nents -= sg_size;
- if (!skip_first_chunk) {
- free_fn(sgl, alloc_size);
+ if (skip_first_chunk)
skip_first_chunk = false;
- }
+ else
+ free_fn(sgl, alloc_size);
sgl = next;
}
* to be released by the balloon driver.
*/
if (trylock_page(page)) {
+#ifdef CONFIG_BALLOON_COMPACTION
if (!PagePrivate(page)) {
/* raced with isolation */
unlock_page(page);
continue;
}
+#endif
spin_lock_irqsave(&b_dev_info->pages_lock, flags);
balloon_page_delete(page);
__count_vm_event(BALLOON_DEFLATE);
err:
kfree(cma->bitmap);
+ cma->count = 0;
return -EINVAL;
}
phys_addr_t highmem_start = __pa(high_memory);
int ret = 0;
- pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n",
- __func__, (unsigned long)size, (unsigned long)base,
- (unsigned long)limit, (unsigned long)alignment);
+ pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n",
+ __func__, &size, &base, &limit, &alignment);
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
size = ALIGN(size, alignment);
limit &= ~(alignment - 1);
+ if (!base)
+ fixed = false;
+
/* size should be aligned with order_per_bit */
if (!IS_ALIGNED(size >> PAGE_SHIFT, 1 << order_per_bit))
return -EINVAL;
/*
- * adjust limit to avoid crossing low/high memory boundary for
- * automatically allocated regions
+ * If allocating at a fixed base the request region must not cross the
+ * low/high memory boundary.
*/
- if (((limit == 0 || limit > memblock_end) &&
- (memblock_end - size < highmem_start &&
- memblock_end > highmem_start)) ||
- (!fixed && limit > highmem_start && limit - size < highmem_start)) {
- limit = highmem_start;
- }
-
- if (fixed && base < highmem_start && base+size > highmem_start) {
+ if (fixed && base < highmem_start && base + size > highmem_start) {
ret = -EINVAL;
- pr_err("Region at %08lx defined on low/high memory boundary (%08lx)\n",
- (unsigned long)base, (unsigned long)highmem_start);
+ pr_err("Region at %pa defined on low/high memory boundary (%pa)\n",
+ &base, &highmem_start);
goto err;
}
+ /*
+ * If the limit is unspecified or above the memblock end, its effective
+ * value will be the memblock end. Set it explicitly to simplify further
+ * checks.
+ */
+ if (limit == 0 || limit > memblock_end)
+ limit = memblock_end;
+
/* Reserve memory */
- if (base && fixed) {
+ if (fixed) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
ret = -EBUSY;
goto err;
}
} else {
- phys_addr_t addr = memblock_alloc_range(size, alignment, base,
- limit);
+ phys_addr_t addr = 0;
+
+ /*
+ * All pages in the reserved area must come from the same zone.
+ * If the requested region crosses the low/high memory boundary,
+ * try allocating from high memory first and fall back to low
+ * memory in case of failure.
+ */
+ if (base < highmem_start && limit > highmem_start) {
+ addr = memblock_alloc_range(size, alignment,
+ highmem_start, limit);
+ limit = highmem_start;
+ }
+
if (!addr) {
- ret = -ENOMEM;
- goto err;
- } else {
- base = addr;
+ addr = memblock_alloc_range(size, alignment, base,
+ limit);
+ if (!addr) {
+ ret = -ENOMEM;
+ goto err;
+ }
}
+
+ base = addr;
}
ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
if (ret)
goto err;
- pr_info("Reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
- (unsigned long)base);
+ pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
+ &base);
return 0;
err:
cc->nr_migratepages = 0;
break;
}
+
+ if (cc->nr_migratepages == COMPACT_CLUSTER_MAX)
+ break;
}
acct_isolated(cc->zone, cc);
preempt_disable();
if (cmpxchg(&huge_zero_page, NULL, zero_page)) {
preempt_enable();
- __free_page(zero_page);
+ __free_pages(zero_page, compound_order(zero_page));
goto retry;
}
if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) == 1) {
struct page *zero_page = xchg(&huge_zero_page, NULL);
BUG_ON(zero_page == NULL);
- __free_page(zero_page);
+ __free_pages(zero_page, compound_order(zero_page));
return HPAGE_PMD_NR;
}
return VM_FAULT_FALLBACK;
if (unlikely(anon_vma_prepare(vma)))
return VM_FAULT_OOM;
- if (unlikely(khugepaged_enter(vma)))
+ if (unlikely(khugepaged_enter(vma, vma->vm_flags)))
return VM_FAULT_OOM;
if (!(flags & FAULT_FLAG_WRITE) &&
transparent_hugepage_use_zero_page()) {
* register it here without waiting a page fault that
* may not happen any time soon.
*/
- if (unlikely(khugepaged_enter_vma_merge(vma)))
+ if (unlikely(khugepaged_enter_vma_merge(vma, *vm_flags)))
return -ENOMEM;
break;
case MADV_NOHUGEPAGE:
return 0;
}
-int khugepaged_enter_vma_merge(struct vm_area_struct *vma)
+int khugepaged_enter_vma_merge(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
unsigned long hstart, hend;
if (!vma->anon_vma)
if (vma->vm_ops)
/* khugepaged not yet working on file or special mappings */
return 0;
- VM_BUG_ON_VMA(vma->vm_flags & VM_NO_THP, vma);
+ VM_BUG_ON_VMA(vm_flags & VM_NO_THP, vma);
hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK;
hend = vma->vm_end & HPAGE_PMD_MASK;
if (hstart < hend)
- return khugepaged_enter(vma);
+ return khugepaged_enter(vma, vm_flags);
return 0;
}
* start move here.
*/
-/* for quick checking without looking up memcg */
-atomic_t memcg_moving __read_mostly;
-
static void mem_cgroup_start_move(struct mem_cgroup *memcg)
{
- atomic_inc(&memcg_moving);
atomic_inc(&memcg->moving_account);
synchronize_rcu();
}
* Now, mem_cgroup_clear_mc() may call this function with NULL.
* We check NULL in callee rather than caller.
*/
- if (memcg) {
- atomic_dec(&memcg_moving);
+ if (memcg)
atomic_dec(&memcg->moving_account);
- }
}
/*
return true;
}
-/*
- * Used to update mapped file or writeback or other statistics.
+/**
+ * mem_cgroup_begin_page_stat - begin a page state statistics transaction
+ * @page: page that is going to change accounted state
+ * @locked: &memcg->move_lock slowpath was taken
+ * @flags: IRQ-state flags for &memcg->move_lock
*
- * Notes: Race condition
+ * This function must mark the beginning of an accounted page state
+ * change to prevent double accounting when the page is concurrently
+ * being moved to another memcg:
*
- * Charging occurs during page instantiation, while the page is
- * unmapped and locked in page migration, or while the page table is
- * locked in THP migration. No race is possible.
+ * memcg = mem_cgroup_begin_page_stat(page, &locked, &flags);
+ * if (TestClearPageState(page))
+ * mem_cgroup_update_page_stat(memcg, state, -1);
+ * mem_cgroup_end_page_stat(memcg, locked, flags);
*
- * Uncharge happens to pages with zero references, no race possible.
+ * The RCU lock is held throughout the transaction. The fast path can
+ * get away without acquiring the memcg->move_lock (@locked is false)
+ * because page moving starts with an RCU grace period.
*
- * Charge moving between groups is protected by checking mm->moving
- * account and taking the move_lock in the slowpath.
+ * The RCU lock also protects the memcg from being freed when the page
+ * state that is going to change is the only thing preventing the page
+ * from being uncharged. E.g. end-writeback clearing PageWriteback(),
+ * which allows migration to go ahead and uncharge the page before the
+ * account transaction might be complete.
*/
-
-void __mem_cgroup_begin_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
+struct mem_cgroup *mem_cgroup_begin_page_stat(struct page *page,
+ bool *locked,
+ unsigned long *flags)
{
struct mem_cgroup *memcg;
struct page_cgroup *pc;
+ rcu_read_lock();
+
+ if (mem_cgroup_disabled())
+ return NULL;
+
pc = lookup_page_cgroup(page);
again:
memcg = pc->mem_cgroup;
if (unlikely(!memcg || !PageCgroupUsed(pc)))
- return;
- /*
- * If this memory cgroup is not under account moving, we don't
- * need to take move_lock_mem_cgroup(). Because we already hold
- * rcu_read_lock(), any calls to move_account will be delayed until
- * rcu_read_unlock().
- */
- VM_BUG_ON(!rcu_read_lock_held());
+ return NULL;
+
+ *locked = false;
if (atomic_read(&memcg->moving_account) <= 0)
- return;
+ return memcg;
move_lock_mem_cgroup(memcg, flags);
if (memcg != pc->mem_cgroup || !PageCgroupUsed(pc)) {
goto again;
}
*locked = true;
+
+ return memcg;
}
-void __mem_cgroup_end_update_page_stat(struct page *page, unsigned long *flags)
+/**
+ * mem_cgroup_end_page_stat - finish a page state statistics transaction
+ * @memcg: the memcg that was accounted against
+ * @locked: value received from mem_cgroup_begin_page_stat()
+ * @flags: value received from mem_cgroup_begin_page_stat()
+ */
+void mem_cgroup_end_page_stat(struct mem_cgroup *memcg, bool locked,
+ unsigned long flags)
{
- struct page_cgroup *pc = lookup_page_cgroup(page);
+ if (memcg && locked)
+ move_unlock_mem_cgroup(memcg, &flags);
- /*
- * It's guaranteed that pc->mem_cgroup never changes while
- * lock is held because a routine modifies pc->mem_cgroup
- * should take move_lock_mem_cgroup().
- */
- move_unlock_mem_cgroup(pc->mem_cgroup, flags);
+ rcu_read_unlock();
}
-void mem_cgroup_update_page_stat(struct page *page,
+/**
+ * mem_cgroup_update_page_stat - update page state statistics
+ * @memcg: memcg to account against
+ * @idx: page state item to account
+ * @val: number of pages (positive or negative)
+ *
+ * See mem_cgroup_begin_page_stat() for locking requirements.
+ */
+void mem_cgroup_update_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx, int val)
{
- struct mem_cgroup *memcg;
- struct page_cgroup *pc = lookup_page_cgroup(page);
- unsigned long uninitialized_var(flags);
-
- if (mem_cgroup_disabled())
- return;
-
VM_BUG_ON(!rcu_read_lock_held());
- memcg = pc->mem_cgroup;
- if (unlikely(!memcg || !PageCgroupUsed(pc)))
- return;
- this_cpu_add(memcg->stat->count[idx], val);
+ if (memcg)
+ this_cpu_add(memcg->stat->count[idx], val);
}
/*
unsigned long start_pfn = pgdat->node_start_pfn;
unsigned long end_pfn = start_pfn + pgdat->node_spanned_pages;
unsigned long pfn;
- struct page *pgdat_page = virt_to_page(pgdat);
int i;
for (pfn = start_pfn; pfn < end_pfn; pfn += PAGES_PER_SECTION) {
node_set_offline(nid);
unregister_one_node(nid);
- if (!PageSlab(pgdat_page) && !PageCompound(pgdat_page))
- /* node data is allocated from boot memory */
- return;
-
/* free waittable in each zone */
for (i = 0; i < MAX_NR_ZONES; i++) {
struct zone *zone = pgdat->node_zones + i;
end, prev->vm_pgoff, NULL);
if (err)
return NULL;
- khugepaged_enter_vma_merge(prev);
+ khugepaged_enter_vma_merge(prev, vm_flags);
return prev;
}
next->vm_pgoff - pglen, NULL);
if (err)
return NULL;
- khugepaged_enter_vma_merge(area);
+ khugepaged_enter_vma_merge(area, vm_flags);
return area;
}
}
}
vma_unlock_anon_vma(vma);
- khugepaged_enter_vma_merge(vma);
+ khugepaged_enter_vma_merge(vma, vma->vm_flags);
validate_mm(vma->vm_mm);
return error;
}
}
}
vma_unlock_anon_vma(vma);
- khugepaged_enter_vma_merge(vma);
+ khugepaged_enter_vma_merge(vma, vma->vm_flags);
validate_mm(vma->vm_mm);
return error;
}
}
EXPORT_SYMBOL(account_page_dirtied);
-/*
- * Helper function for set_page_writeback family.
- *
- * The caller must hold mem_cgroup_begin/end_update_page_stat() lock
- * while calling this function.
- * See test_set_page_writeback for example.
- *
- * NOTE: Unlike account_page_dirtied this does not rely on being atomic
- * wrt interrupts.
- */
-void account_page_writeback(struct page *page)
-{
- mem_cgroup_inc_page_stat(page, MEM_CGROUP_STAT_WRITEBACK);
- inc_zone_page_state(page, NR_WRITEBACK);
-}
-EXPORT_SYMBOL(account_page_writeback);
-
/*
* For address_spaces which do not use buffers. Just tag the page as dirty in
* its radix tree.
int test_clear_page_writeback(struct page *page)
{
struct address_space *mapping = page_mapping(page);
- int ret;
- bool locked;
unsigned long memcg_flags;
+ struct mem_cgroup *memcg;
+ bool locked;
+ int ret;
- mem_cgroup_begin_update_page_stat(page, &locked, &memcg_flags);
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &memcg_flags);
if (mapping) {
struct backing_dev_info *bdi = mapping->backing_dev_info;
unsigned long flags;
ret = TestClearPageWriteback(page);
}
if (ret) {
- mem_cgroup_dec_page_stat(page, MEM_CGROUP_STAT_WRITEBACK);
+ mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_WRITEBACK);
dec_zone_page_state(page, NR_WRITEBACK);
inc_zone_page_state(page, NR_WRITTEN);
}
- mem_cgroup_end_update_page_stat(page, &locked, &memcg_flags);
+ mem_cgroup_end_page_stat(memcg, locked, memcg_flags);
return ret;
}
int __test_set_page_writeback(struct page *page, bool keep_write)
{
struct address_space *mapping = page_mapping(page);
- int ret;
- bool locked;
unsigned long memcg_flags;
+ struct mem_cgroup *memcg;
+ bool locked;
+ int ret;
- mem_cgroup_begin_update_page_stat(page, &locked, &memcg_flags);
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &memcg_flags);
if (mapping) {
struct backing_dev_info *bdi = mapping->backing_dev_info;
unsigned long flags;
} else {
ret = TestSetPageWriteback(page);
}
- if (!ret)
- account_page_writeback(page);
- mem_cgroup_end_update_page_stat(page, &locked, &memcg_flags);
+ if (!ret) {
+ mem_cgroup_inc_page_stat(memcg, MEM_CGROUP_STAT_WRITEBACK);
+ inc_zone_page_state(page, NR_WRITEBACK);
+ }
+ mem_cgroup_end_page_stat(memcg, locked, memcg_flags);
return ret;
}
sizeof(struct page_cgroup) * PAGES_PER_SECTION;
BUG_ON(PageReserved(page));
+ kmemleak_free(addr);
free_pages_exact(addr, table_size);
}
}
*/
void page_add_file_rmap(struct page *page)
{
- bool locked;
+ struct mem_cgroup *memcg;
unsigned long flags;
+ bool locked;
- mem_cgroup_begin_update_page_stat(page, &locked, &flags);
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &flags);
if (atomic_inc_and_test(&page->_mapcount)) {
__inc_zone_page_state(page, NR_FILE_MAPPED);
- mem_cgroup_inc_page_stat(page, MEM_CGROUP_STAT_FILE_MAPPED);
+ mem_cgroup_inc_page_stat(memcg, MEM_CGROUP_STAT_FILE_MAPPED);
}
- mem_cgroup_end_update_page_stat(page, &locked, &flags);
+ mem_cgroup_end_page_stat(memcg, locked, flags);
+}
+
+static void page_remove_file_rmap(struct page *page)
+{
+ struct mem_cgroup *memcg;
+ unsigned long flags;
+ bool locked;
+
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &flags);
+
+ /* page still mapped by someone else? */
+ if (!atomic_add_negative(-1, &page->_mapcount))
+ goto out;
+
+ /* Hugepages are not counted in NR_FILE_MAPPED for now. */
+ if (unlikely(PageHuge(page)))
+ goto out;
+
+ /*
+ * We use the irq-unsafe __{inc|mod}_zone_page_stat because
+ * these counters are not modified in interrupt context, and
+ * pte lock(a spinlock) is held, which implies preemption disabled.
+ */
+ __dec_zone_page_state(page, NR_FILE_MAPPED);
+ mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_FILE_MAPPED);
+
+ if (unlikely(PageMlocked(page)))
+ clear_page_mlock(page);
+out:
+ mem_cgroup_end_page_stat(memcg, locked, flags);
}
/**
*/
void page_remove_rmap(struct page *page)
{
- bool anon = PageAnon(page);
- bool locked;
- unsigned long flags;
-
- /*
- * The anon case has no mem_cgroup page_stat to update; but may
- * uncharge_page() below, where the lock ordering can deadlock if
- * we hold the lock against page_stat move: so avoid it on anon.
- */
- if (!anon)
- mem_cgroup_begin_update_page_stat(page, &locked, &flags);
+ if (!PageAnon(page)) {
+ page_remove_file_rmap(page);
+ return;
+ }
/* page still mapped by someone else? */
if (!atomic_add_negative(-1, &page->_mapcount))
- goto out;
+ return;
+
+ /* Hugepages are not counted in NR_ANON_PAGES for now. */
+ if (unlikely(PageHuge(page)))
+ return;
/*
- * Hugepages are not counted in NR_ANON_PAGES nor NR_FILE_MAPPED
- * and not charged by memcg for now.
- *
* We use the irq-unsafe __{inc|mod}_zone_page_stat because
* these counters are not modified in interrupt context, and
- * these counters are not modified in interrupt context, and
* pte lock(a spinlock) is held, which implies preemption disabled.
*/
- if (unlikely(PageHuge(page)))
- goto out;
- if (anon) {
- if (PageTransHuge(page))
- __dec_zone_page_state(page,
- NR_ANON_TRANSPARENT_HUGEPAGES);
- __mod_zone_page_state(page_zone(page), NR_ANON_PAGES,
- -hpage_nr_pages(page));
- } else {
- __dec_zone_page_state(page, NR_FILE_MAPPED);
- mem_cgroup_dec_page_stat(page, MEM_CGROUP_STAT_FILE_MAPPED);
- mem_cgroup_end_update_page_stat(page, &locked, &flags);
- }
+ if (PageTransHuge(page))
+ __dec_zone_page_state(page, NR_ANON_TRANSPARENT_HUGEPAGES);
+
+ __mod_zone_page_state(page_zone(page), NR_ANON_PAGES,
+ -hpage_nr_pages(page));
+
if (unlikely(PageMlocked(page)))
clear_page_mlock(page);
+
/*
* It would be tidy to reset the PageAnon mapping here,
* but that might overwrite a racing page_add_anon_rmap
* Leaving it set also helps swapoff to reinstate ptes
* faster for those pages still in swapcache.
*/
- return;
-out:
- if (!anon)
- mem_cgroup_end_update_page_stat(page, &locked, &flags);
}
/*
s->object_size);
continue;
}
-
-#if !defined(CONFIG_SLUB)
- if (!strcmp(s->name, name)) {
- pr_err("%s (%s): Cache name already exists.\n",
- __func__, name);
- dump_stack();
- s = NULL;
- return -EINVAL;
- }
-#endif
}
WARN_ON(strchr(name, ' ')); /* It confuses parsers */
* necessary) to @newsize. It will be typically be called from the filesystem's
* setattr function when ATTR_SIZE is passed in.
*
- * Must be called with inode_mutex held and before all filesystem specific
- * block truncation has been performed.
+ * Must be called with a lock serializing truncates and writes (generally
+ * i_mutex but e.g. xfs uses a different lock) and before all filesystem
+ * specific block truncation has been performed.
*/
void truncate_setsize(struct inode *inode, loff_t newsize)
{
struct page *page;
pgoff_t index;
- WARN_ON(!mutex_is_locked(&inode->i_mutex));
WARN_ON(to > inode->i_size);
if (from >= to || bsize == PAGE_CACHE_SIZE)
bool "Networking support"
select NLATTR
select GENERIC_NET_UTILS
- select ANON_INODES
+ select BPF
---help---
Unless you really know what you are doing, you should say Y here.
The reason is that some programs need kernel networking support even
kfree_skb(skb);
}
+EXPORT_SYMBOL_GPL(br_deliver);
/* called with rcu_read_lock */
void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0)
static int br_parse_ip_options(struct sk_buff *skb)
{
- struct ip_options *opt;
const struct iphdr *iph;
struct net_device *dev = skb->dev;
u32 len;
goto inhdr_error;
iph = ip_hdr(skb);
- opt = &(IPCB(skb)->opt);
/* Basic sanity checks */
if (iph->ihl < 5 || iph->version != 4)
}
memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
- if (iph->ihl == 5)
- return 0;
-
- opt->optlen = iph->ihl*4 - sizeof(struct iphdr);
- if (ip_options_compile(dev_net(dev), opt, skb))
- goto inhdr_error;
-
- /* Check correct handling of SRR option */
- if (unlikely(opt->srr)) {
- struct in_device *in_dev = __in_dev_get_rcu(dev);
- if (in_dev && !IN_DEV_SOURCE_ROUTE(in_dev))
- goto drop;
-
- if (ip_options_rcv_srr(skb))
- goto drop;
- }
-
+ /* We should really parse IP options here but until
+ * somebody who actually uses IP options complains to
+ * us we'll just silently ignore the options because
+ * we're lazy!
+ */
return 0;
inhdr_error:
.type = NFT_CHAIN_T_DEFAULT,
.family = NFPROTO_BRIDGE,
.owner = THIS_MODULE,
- .hook_mask = (1 << NF_BR_LOCAL_IN) |
+ .hook_mask = (1 << NF_BR_PRE_ROUTING) |
+ (1 << NF_BR_LOCAL_IN) |
(1 << NF_BR_FORWARD) |
- (1 << NF_BR_LOCAL_OUT),
+ (1 << NF_BR_LOCAL_OUT) |
+ (1 << NF_BR_POST_ROUTING),
};
static int __init nf_tables_bridge_init(void)
#include <net/netfilter/nft_reject.h>
#include <net/netfilter/ipv4/nf_reject.h>
#include <net/netfilter/ipv6/nf_reject.h>
+#include <linux/ip.h>
+#include <net/ip.h>
+#include <linux/netfilter_bridge.h>
+#include "../br_private.h"
+
+static void nft_reject_br_push_etherhdr(struct sk_buff *oldskb,
+ struct sk_buff *nskb)
+{
+ struct ethhdr *eth;
+
+ eth = (struct ethhdr *)skb_push(nskb, ETH_HLEN);
+ skb_reset_mac_header(nskb);
+ ether_addr_copy(eth->h_source, eth_hdr(oldskb)->h_dest);
+ ether_addr_copy(eth->h_dest, eth_hdr(oldskb)->h_source);
+ eth->h_proto = eth_hdr(oldskb)->h_proto;
+ skb_pull(nskb, ETH_HLEN);
+}
+
+static int nft_reject_iphdr_validate(struct sk_buff *oldskb)
+{
+ struct iphdr *iph;
+ u32 len;
+
+ if (!pskb_may_pull(oldskb, sizeof(struct iphdr)))
+ return 0;
+
+ iph = ip_hdr(oldskb);
+ if (iph->ihl < 5 || iph->version != 4)
+ return 0;
+
+ len = ntohs(iph->tot_len);
+ if (oldskb->len < len)
+ return 0;
+ else if (len < (iph->ihl*4))
+ return 0;
+
+ if (!pskb_may_pull(oldskb, iph->ihl*4))
+ return 0;
+
+ return 1;
+}
+
+static void nft_reject_br_send_v4_tcp_reset(struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ struct iphdr *niph;
+ const struct tcphdr *oth;
+ struct tcphdr _oth;
+
+ if (!nft_reject_iphdr_validate(oldskb))
+ return;
+
+ oth = nf_reject_ip_tcphdr_get(oldskb, &_oth, hook);
+ if (!oth)
+ return;
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct tcphdr) +
+ LL_MAX_HEADER, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ niph = nf_reject_iphdr_put(nskb, oldskb, IPPROTO_TCP,
+ sysctl_ip_default_ttl);
+ nf_reject_ip_tcphdr_put(nskb, oldskb, oth);
+ niph->ttl = sysctl_ip_default_ttl;
+ niph->tot_len = htons(nskb->len);
+ ip_send_check(niph);
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
+
+static void nft_reject_br_send_v4_unreach(struct sk_buff *oldskb, int hook,
+ u8 code)
+{
+ struct sk_buff *nskb;
+ struct iphdr *niph;
+ struct icmphdr *icmph;
+ unsigned int len;
+ void *payload;
+ __wsum csum;
+
+ if (!nft_reject_iphdr_validate(oldskb))
+ return;
+
+ /* IP header checks: fragment. */
+ if (ip_hdr(oldskb)->frag_off & htons(IP_OFFSET))
+ return;
+
+ /* RFC says return as much as we can without exceeding 576 bytes. */
+ len = min_t(unsigned int, 536, oldskb->len);
+
+ if (!pskb_may_pull(oldskb, len))
+ return;
+
+ if (nf_ip_checksum(oldskb, hook, ip_hdrlen(oldskb), 0))
+ return;
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct icmphdr) +
+ LL_MAX_HEADER + len, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ niph = nf_reject_iphdr_put(nskb, oldskb, IPPROTO_ICMP,
+ sysctl_ip_default_ttl);
+
+ skb_reset_transport_header(nskb);
+ icmph = (struct icmphdr *)skb_put(nskb, sizeof(struct icmphdr));
+ memset(icmph, 0, sizeof(*icmph));
+ icmph->type = ICMP_DEST_UNREACH;
+ icmph->code = code;
+
+ payload = skb_put(nskb, len);
+ memcpy(payload, skb_network_header(oldskb), len);
+
+ csum = csum_partial((void *)icmph, len + sizeof(struct icmphdr), 0);
+ icmph->checksum = csum_fold(csum);
+
+ niph->tot_len = htons(nskb->len);
+ ip_send_check(niph);
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
+
+static int nft_reject_ip6hdr_validate(struct sk_buff *oldskb)
+{
+ struct ipv6hdr *hdr;
+ u32 pkt_len;
+
+ if (!pskb_may_pull(oldskb, sizeof(struct ipv6hdr)))
+ return 0;
+
+ hdr = ipv6_hdr(oldskb);
+ if (hdr->version != 6)
+ return 0;
+
+ pkt_len = ntohs(hdr->payload_len);
+ if (pkt_len + sizeof(struct ipv6hdr) > oldskb->len)
+ return 0;
+
+ return 1;
+}
+
+static void nft_reject_br_send_v6_tcp_reset(struct net *net,
+ struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ const struct tcphdr *oth;
+ struct tcphdr _oth;
+ unsigned int otcplen;
+ struct ipv6hdr *nip6h;
+
+ if (!nft_reject_ip6hdr_validate(oldskb))
+ return;
+
+ oth = nf_reject_ip6_tcphdr_get(oldskb, &_oth, &otcplen, hook);
+ if (!oth)
+ return;
+
+ nskb = alloc_skb(sizeof(struct ipv6hdr) + sizeof(struct tcphdr) +
+ LL_MAX_HEADER, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ nip6h = nf_reject_ip6hdr_put(nskb, oldskb, IPPROTO_TCP,
+ net->ipv6.devconf_all->hop_limit);
+ nf_reject_ip6_tcphdr_put(nskb, oldskb, oth, otcplen);
+ nip6h->payload_len = htons(nskb->len - sizeof(struct ipv6hdr));
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
+
+static void nft_reject_br_send_v6_unreach(struct net *net,
+ struct sk_buff *oldskb, int hook,
+ u8 code)
+{
+ struct sk_buff *nskb;
+ struct ipv6hdr *nip6h;
+ struct icmp6hdr *icmp6h;
+ unsigned int len;
+ void *payload;
+
+ if (!nft_reject_ip6hdr_validate(oldskb))
+ return;
+
+ /* Include "As much of invoking packet as possible without the ICMPv6
+ * packet exceeding the minimum IPv6 MTU" in the ICMP payload.
+ */
+ len = min_t(unsigned int, 1220, oldskb->len);
+
+ if (!pskb_may_pull(oldskb, len))
+ return;
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct icmp6hdr) +
+ LL_MAX_HEADER + len, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ nip6h = nf_reject_ip6hdr_put(nskb, oldskb, IPPROTO_ICMPV6,
+ net->ipv6.devconf_all->hop_limit);
+
+ skb_reset_transport_header(nskb);
+ icmp6h = (struct icmp6hdr *)skb_put(nskb, sizeof(struct icmp6hdr));
+ memset(icmp6h, 0, sizeof(*icmp6h));
+ icmp6h->icmp6_type = ICMPV6_DEST_UNREACH;
+ icmp6h->icmp6_code = code;
+
+ payload = skb_put(nskb, len);
+ memcpy(payload, skb_network_header(oldskb), len);
+ nip6h->payload_len = htons(nskb->len - sizeof(struct ipv6hdr));
+
+ icmp6h->icmp6_cksum =
+ csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr,
+ nskb->len - sizeof(struct ipv6hdr),
+ IPPROTO_ICMPV6,
+ csum_partial(icmp6h,
+ nskb->len - sizeof(struct ipv6hdr),
+ 0));
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
static void nft_reject_bridge_eval(const struct nft_expr *expr,
struct nft_data data[NFT_REG_MAX + 1],
{
struct nft_reject *priv = nft_expr_priv(expr);
struct net *net = dev_net((pkt->in != NULL) ? pkt->in : pkt->out);
+ const unsigned char *dest = eth_hdr(pkt->skb)->h_dest;
+
+ if (is_broadcast_ether_addr(dest) ||
+ is_multicast_ether_addr(dest))
+ goto out;
switch (eth_hdr(pkt->skb)->h_proto) {
case htons(ETH_P_IP):
switch (priv->type) {
case NFT_REJECT_ICMP_UNREACH:
- nf_send_unreach(pkt->skb, priv->icmp_code);
+ nft_reject_br_send_v4_unreach(pkt->skb,
+ pkt->ops->hooknum,
+ priv->icmp_code);
break;
case NFT_REJECT_TCP_RST:
- nf_send_reset(pkt->skb, pkt->ops->hooknum);
+ nft_reject_br_send_v4_tcp_reset(pkt->skb,
+ pkt->ops->hooknum);
break;
case NFT_REJECT_ICMPX_UNREACH:
- nf_send_unreach(pkt->skb,
- nft_reject_icmp_code(priv->icmp_code));
+ nft_reject_br_send_v4_unreach(pkt->skb,
+ pkt->ops->hooknum,
+ nft_reject_icmp_code(priv->icmp_code));
break;
}
break;
case htons(ETH_P_IPV6):
switch (priv->type) {
case NFT_REJECT_ICMP_UNREACH:
- nf_send_unreach6(net, pkt->skb, priv->icmp_code,
- pkt->ops->hooknum);
+ nft_reject_br_send_v6_unreach(net, pkt->skb,
+ pkt->ops->hooknum,
+ priv->icmp_code);
break;
case NFT_REJECT_TCP_RST:
- nf_send_reset6(net, pkt->skb, pkt->ops->hooknum);
+ nft_reject_br_send_v6_tcp_reset(net, pkt->skb,
+ pkt->ops->hooknum);
break;
case NFT_REJECT_ICMPX_UNREACH:
- nf_send_unreach6(net, pkt->skb,
- nft_reject_icmpv6_code(priv->icmp_code),
- pkt->ops->hooknum);
+ nft_reject_br_send_v6_unreach(net, pkt->skb,
+ pkt->ops->hooknum,
+ nft_reject_icmpv6_code(priv->icmp_code));
break;
}
break;
/* No explicit way to reject this protocol, drop it. */
break;
}
+out:
data[NFT_REG_VERDICT].verdict = NF_DROP;
}
+static int nft_reject_bridge_validate_hooks(const struct nft_chain *chain)
+{
+ struct nft_base_chain *basechain;
+
+ if (chain->flags & NFT_BASE_CHAIN) {
+ basechain = nft_base_chain(chain);
+
+ switch (basechain->ops[0].hooknum) {
+ case NF_BR_PRE_ROUTING:
+ case NF_BR_LOCAL_IN:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ }
+ return 0;
+}
+
static int nft_reject_bridge_init(const struct nft_ctx *ctx,
const struct nft_expr *expr,
const struct nlattr * const tb[])
{
struct nft_reject *priv = nft_expr_priv(expr);
- int icmp_code;
+ int icmp_code, err;
+
+ err = nft_reject_bridge_validate_hooks(ctx->chain);
+ if (err < 0)
+ return err;
if (tb[NFTA_REJECT_TYPE] == NULL)
return -EINVAL;
return -1;
}
+static int nft_reject_bridge_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_reject_bridge_validate_hooks(ctx->chain);
+}
+
static struct nft_expr_type nft_reject_bridge_type;
static const struct nft_expr_ops nft_reject_bridge_ops = {
.type = &nft_reject_bridge_type,
.eval = nft_reject_bridge_eval,
.init = nft_reject_bridge_init,
.dump = nft_reject_bridge_dump,
+ .validate = nft_reject_bridge_validate,
};
static struct nft_expr_type nft_reject_bridge_type __read_mostly = {
struct ceph_crypto_key old_key;
void *ticket_buf = NULL;
void *tp, *tpend;
+ void **ptp;
struct ceph_timespec new_validity;
struct ceph_crypto_key new_session_key;
struct ceph_buffer *new_ticket_blob;
goto out;
}
tp = ticket_buf;
- dlen = ceph_decode_32(&tp);
+ ptp = &tp;
+ tpend = *ptp + dlen;
} else {
/* unencrypted */
- ceph_decode_32_safe(p, end, dlen, bad);
- ticket_buf = kmalloc(dlen, GFP_NOFS);
- if (!ticket_buf) {
- ret = -ENOMEM;
- goto out;
- }
- tp = ticket_buf;
- ceph_decode_need(p, end, dlen, bad);
- ceph_decode_copy(p, ticket_buf, dlen);
+ ptp = p;
+ tpend = end;
}
- tpend = tp + dlen;
+ ceph_decode_32_safe(ptp, tpend, dlen, bad);
dout(" ticket blob is %d bytes\n", dlen);
- ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
- blob_struct_v = ceph_decode_8(&tp);
- new_secret_id = ceph_decode_64(&tp);
- ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
+ ceph_decode_need(ptp, tpend, 1 + sizeof(u64), bad);
+ blob_struct_v = ceph_decode_8(ptp);
+ new_secret_id = ceph_decode_64(ptp);
+ ret = ceph_decode_buffer(&new_ticket_blob, ptp, tpend);
if (ret)
goto out;
IPPROTO_TCP, &sock);
if (ret)
return ret;
- sock->sk->sk_allocation = GFP_NOFS;
+ sock->sk->sk_allocation = GFP_NOFS | __GFP_MEMALLOC;
#ifdef CONFIG_LOCKDEP
lockdep_set_class(&sock->sk->sk_lock, &socket_class);
return ret;
}
+
+ sk_set_memalloc(sock->sk);
+
con->sock = sock;
return 0;
}
{
struct ceph_connection *con = container_of(work, struct ceph_connection,
work.work);
+ unsigned long pflags = current->flags;
bool fault;
+ current->flags |= PF_MEMALLOC;
+
mutex_lock(&con->mutex);
while (true) {
int ret;
con_fault_finish(con);
con->ops->put(con);
+
+ tsk_restore_flags(current, pflags, PF_MEMALLOC);
}
/*
static void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
{
+ if (unlikely(skb->pfmemalloc)) {
+ consume_skb(skb);
+ return;
+ }
__skb_pull(skb, skb_headlen(skb));
/* restore the reserve we had after netdev_alloc_skb_ip_align() */
skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN - skb_headroom(skb));
{
const struct ethtool_ops *ops = dev->ethtool_ops;
- if (!ops->get_eeprom || !ops->get_eeprom_len)
+ if (!ops->get_eeprom || !ops->get_eeprom_len ||
+ !ops->get_eeprom_len(dev))
return -EOPNOTSUPP;
return ethtool_get_any_eeprom(dev, useraddr, ops->get_eeprom,
u8 *data;
int ret = 0;
- if (!ops->set_eeprom || !ops->get_eeprom_len)
+ if (!ops->set_eeprom || !ops->get_eeprom_len ||
+ !ops->get_eeprom_len(dev))
return -EOPNOTSUPP;
if (copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
unsigned int skb_gso_transport_seglen(const struct sk_buff *skb)
{
const struct skb_shared_info *shinfo = skb_shinfo(skb);
+ unsigned int thlen = 0;
- if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))
- return tcp_hdrlen(skb) + shinfo->gso_size;
+ if (skb->encapsulation) {
+ thlen = skb_inner_transport_header(skb) -
+ skb_transport_header(skb);
+ if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))
+ thlen += inner_tcp_hdrlen(skb);
+ } else if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))) {
+ thlen = tcp_hdrlen(skb);
+ }
/* UFO sets gso_size to the size of the fragmentation
* payload, i.e. the size of the L4 (UDP) header is already
* accounted for.
*/
- return shinfo->gso_size;
+ return thlen + shinfo->gso_size;
}
EXPORT_SYMBOL_GPL(skb_gso_transport_seglen);
#include <linux/export.h>
#include <net/ip.h>
#include <net/tso.h>
+#include <asm/unaligned.h>
/* Calculate expected number of TX descriptors */
int tso_count_descs(struct sk_buff *skb)
iph->id = htons(tso->ip_id);
iph->tot_len = htons(size + hdr_len - mac_hdr_len);
tcph = (struct tcphdr *)(hdr + skb_transport_offset(skb));
- tcph->seq = htonl(tso->tcp_seq);
+ put_unaligned_be32(tso->tcp_seq, &tcph->seq);
tso->ip_id++;
if (!is_last) {
dst->rcv = brcm_netdev_ops.rcv;
break;
#endif
- default:
+ case DSA_TAG_PROTO_NONE:
break;
+ default:
+ ret = -ENOPROTOOPT;
+ goto out;
}
dst->tag_protocol = drv->tag_protocol;
encap = SKB_GSO_CB(skb)->encap_level > 0;
if (encap)
- features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ features &= skb->dev->hw_enc_features;
SKB_GSO_CB(skb)->encap_level += ihl;
skb_reset_transport_header(skb);
greh = (struct gre_base_hdr *)skb_transport_header(skb);
- ghl = skb_inner_network_header(skb) - skb_transport_header(skb);
+ ghl = skb_inner_mac_header(skb) - skb_transport_header(skb);
if (unlikely(ghl < sizeof(*greh)))
goto out;
skb->mac_len = skb_inner_network_offset(skb);
/* segment inner packet. */
- enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ enc_features = skb->dev->hw_enc_features & features;
segs = skb_mac_gso_segment(skb, enc_features);
if (IS_ERR_OR_NULL(segs)) {
skb_gso_error_unwind(skb, protocol, ghl, mac_offset, mac_len);
atomic_inc(&fq->refcnt);
spin_unlock(&hb->chain_lock);
del_timer_sync(&fq->timer);
- WARN_ON(atomic_read(&fq->refcnt) != 1);
inet_frag_put(fq, f);
goto evict_again;
}
struct inet_frag_bucket *hb;
hb = get_frag_bucket_locked(fq, f);
- hlist_del(&fq->list);
+ if (!(fq->flags & INET_FRAG_EVICTED))
+ hlist_del(&fq->list);
spin_unlock(&hb->chain_lock);
}
*/
features = netif_skb_features(skb);
segs = skb_gso_segment(skb, features & ~NETIF_F_GSO_MASK);
- if (IS_ERR(segs)) {
+ if (IS_ERR_OR_NULL(segs)) {
kfree_skb(skb);
return -ENOMEM;
}
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <net/ip.h>
#include <net/tcp.h>
#include <net/route.h>
#include <net/dst.h>
#include <linux/netfilter_ipv4.h>
+#include <net/netfilter/ipv4/nf_reject.h>
-/* Send RST reply */
-void nf_send_reset(struct sk_buff *oldskb, int hook)
+const struct tcphdr *nf_reject_ip_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *_oth, int hook)
{
- struct sk_buff *nskb;
- const struct iphdr *oiph;
- struct iphdr *niph;
const struct tcphdr *oth;
- struct tcphdr _otcph, *tcph;
/* IP header checks: fragment. */
if (ip_hdr(oldskb)->frag_off & htons(IP_OFFSET))
- return;
+ return NULL;
oth = skb_header_pointer(oldskb, ip_hdrlen(oldskb),
- sizeof(_otcph), &_otcph);
+ sizeof(struct tcphdr), _oth);
if (oth == NULL)
- return;
+ return NULL;
/* No RST for RST. */
if (oth->rst)
- return;
-
- if (skb_rtable(oldskb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
- return;
+ return NULL;
/* Check checksum */
if (nf_ip_checksum(oldskb, hook, ip_hdrlen(oldskb), IPPROTO_TCP))
- return;
- oiph = ip_hdr(oldskb);
+ return NULL;
- nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct tcphdr) +
- LL_MAX_HEADER, GFP_ATOMIC);
- if (!nskb)
- return;
+ return oth;
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip_tcphdr_get);
- skb_reserve(nskb, LL_MAX_HEADER);
+struct iphdr *nf_reject_iphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int ttl)
+{
+ struct iphdr *niph, *oiph = ip_hdr(oldskb);
skb_reset_network_header(nskb);
niph = (struct iphdr *)skb_put(nskb, sizeof(struct iphdr));
niph->tos = 0;
niph->id = 0;
niph->frag_off = htons(IP_DF);
- niph->protocol = IPPROTO_TCP;
+ niph->protocol = protocol;
niph->check = 0;
niph->saddr = oiph->daddr;
niph->daddr = oiph->saddr;
+ niph->ttl = ttl;
+
+ nskb->protocol = htons(ETH_P_IP);
+
+ return niph;
+}
+EXPORT_SYMBOL_GPL(nf_reject_iphdr_put);
+
+void nf_reject_ip_tcphdr_put(struct sk_buff *nskb, const struct sk_buff *oldskb,
+ const struct tcphdr *oth)
+{
+ struct iphdr *niph = ip_hdr(nskb);
+ struct tcphdr *tcph;
skb_reset_transport_header(nskb);
tcph = (struct tcphdr *)skb_put(nskb, sizeof(struct tcphdr));
tcph->dest = oth->source;
tcph->doff = sizeof(struct tcphdr) / 4;
- if (oth->ack)
+ if (oth->ack) {
tcph->seq = oth->ack_seq;
- else {
+ } else {
tcph->ack_seq = htonl(ntohl(oth->seq) + oth->syn + oth->fin +
oldskb->len - ip_hdrlen(oldskb) -
(oth->doff << 2));
nskb->ip_summed = CHECKSUM_PARTIAL;
nskb->csum_start = (unsigned char *)tcph - nskb->head;
nskb->csum_offset = offsetof(struct tcphdr, check);
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip_tcphdr_put);
+
+/* Send RST reply */
+void nf_send_reset(struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ const struct iphdr *oiph;
+ struct iphdr *niph;
+ const struct tcphdr *oth;
+ struct tcphdr _oth;
+
+ oth = nf_reject_ip_tcphdr_get(oldskb, &_oth, hook);
+ if (!oth)
+ return;
+
+ if (skb_rtable(oldskb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
+ return;
+
+ oiph = ip_hdr(oldskb);
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct tcphdr) +
+ LL_MAX_HEADER, GFP_ATOMIC);
+ if (!nskb)
+ return;
/* ip_route_me_harder expects skb->dst to be set */
skb_dst_set_noref(nskb, skb_dst(oldskb));
- nskb->protocol = htons(ETH_P_IP);
+ skb_reserve(nskb, LL_MAX_HEADER);
+ niph = nf_reject_iphdr_put(nskb, oldskb, IPPROTO_TCP,
+ ip4_dst_hoplimit(skb_dst(nskb)));
+ nf_reject_ip_tcphdr_put(nskb, oldskb, oth);
+
if (ip_route_me_harder(nskb, RTN_UNSPEC))
goto free_nskb;
- niph->ttl = ip4_dst_hoplimit(skb_dst(nskb));
-
/* "Never happens" */
if (nskb->len > dst_mtu(skb_dst(nskb)))
goto free_nskb;
kfree_skb(nskb);
}
EXPORT_SYMBOL_GPL(nf_send_reset);
+
+MODULE_LICENSE("GPL");
.eval = nft_masq_ipv4_eval,
.init = nft_masq_init,
.dump = nft_masq_dump,
+ .validate = nft_masq_validate,
};
static struct nft_expr_type nft_masq_ipv4_type __read_mostly = {
no_route:
RT_CACHE_STAT_INC(in_no_route);
res.type = RTN_UNREACHABLE;
+ res.fi = NULL;
goto local_input;
/*
#endif
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_md5sig_pool __percpu *tcp_md5sig_pool __read_mostly;
+static DEFINE_PER_CPU(struct tcp_md5sig_pool, tcp_md5sig_pool);
static DEFINE_MUTEX(tcp_md5sig_mutex);
-
-static void __tcp_free_md5sig_pool(struct tcp_md5sig_pool __percpu *pool)
-{
- int cpu;
-
- for_each_possible_cpu(cpu) {
- struct tcp_md5sig_pool *p = per_cpu_ptr(pool, cpu);
-
- if (p->md5_desc.tfm)
- crypto_free_hash(p->md5_desc.tfm);
- }
- free_percpu(pool);
-}
+static bool tcp_md5sig_pool_populated = false;
static void __tcp_alloc_md5sig_pool(void)
{
int cpu;
- struct tcp_md5sig_pool __percpu *pool;
-
- pool = alloc_percpu(struct tcp_md5sig_pool);
- if (!pool)
- return;
for_each_possible_cpu(cpu) {
- struct crypto_hash *hash;
-
- hash = crypto_alloc_hash("md5", 0, CRYPTO_ALG_ASYNC);
- if (IS_ERR_OR_NULL(hash))
- goto out_free;
+ if (!per_cpu(tcp_md5sig_pool, cpu).md5_desc.tfm) {
+ struct crypto_hash *hash;
- per_cpu_ptr(pool, cpu)->md5_desc.tfm = hash;
+ hash = crypto_alloc_hash("md5", 0, CRYPTO_ALG_ASYNC);
+ if (IS_ERR_OR_NULL(hash))
+ return;
+ per_cpu(tcp_md5sig_pool, cpu).md5_desc.tfm = hash;
+ }
}
- /* before setting tcp_md5sig_pool, we must commit all writes
- * to memory. See ACCESS_ONCE() in tcp_get_md5sig_pool()
+ /* before setting tcp_md5sig_pool_populated, we must commit all writes
+ * to memory. See smp_rmb() in tcp_get_md5sig_pool()
*/
smp_wmb();
- tcp_md5sig_pool = pool;
- return;
-out_free:
- __tcp_free_md5sig_pool(pool);
+ tcp_md5sig_pool_populated = true;
}
bool tcp_alloc_md5sig_pool(void)
{
- if (unlikely(!tcp_md5sig_pool)) {
+ if (unlikely(!tcp_md5sig_pool_populated)) {
mutex_lock(&tcp_md5sig_mutex);
- if (!tcp_md5sig_pool)
+ if (!tcp_md5sig_pool_populated)
__tcp_alloc_md5sig_pool();
mutex_unlock(&tcp_md5sig_mutex);
}
- return tcp_md5sig_pool != NULL;
+ return tcp_md5sig_pool_populated;
}
EXPORT_SYMBOL(tcp_alloc_md5sig_pool);
*/
struct tcp_md5sig_pool *tcp_get_md5sig_pool(void)
{
- struct tcp_md5sig_pool __percpu *p;
-
local_bh_disable();
- p = ACCESS_ONCE(tcp_md5sig_pool);
- if (p)
- return raw_cpu_ptr(p);
+ if (tcp_md5sig_pool_populated) {
+ /* coupled with smp_wmb() in __tcp_alloc_md5sig_pool() */
+ smp_rmb();
+ return this_cpu_ptr(&tcp_md5sig_pool);
+ }
local_bh_enable();
return NULL;
}
inet->inet_dport = usin->sin_port;
inet->inet_daddr = daddr;
- inet_set_txhash(sk);
-
inet_csk(sk)->icsk_ext_hdr_len = 0;
if (inet_opt)
inet_csk(sk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
if (err)
goto failure;
+ inet_set_txhash(sk);
+
rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
inet->inet_sport, inet->inet_dport, sk);
if (IS_ERR(rt)) {
static bool skb_still_in_host_queue(const struct sock *sk,
const struct sk_buff *skb)
{
- if (unlikely(skb_fclone_busy(skb))) {
+ if (unlikely(skb_fclone_busy(sk, skb))) {
NET_INC_STATS_BH(sock_net(sk),
LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES);
return true;
skb->encap_hdr_csum = 1;
/* segment inner packet. */
- enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ enc_features = skb->dev->hw_enc_features & features;
segs = gso_inner_segment(skb, enc_features);
if (IS_ERR_OR_NULL(segs)) {
skb_gso_error_unwind(skb, protocol, tnl_hlen, mac_offset,
}
write_unlock_bh(&idev->lock);
+ inet6_ifinfo_notify(RTM_NEWLINK, idev);
addrconf_verify_rtnl();
return 0;
}
encap = SKB_GSO_CB(skb)->encap_level > 0;
if (encap)
- features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ features &= skb->dev->hw_enc_features;
SKB_GSO_CB(skb)->encap_level += sizeof(*ipv6h);
ipv6h = ipv6_hdr(skb);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#include <linux/module.h>
#include <net/ipv6.h>
#include <net/ip6_route.h>
#include <net/ip6_fib.h>
#include <net/ip6_checksum.h>
#include <linux/netfilter_ipv6.h>
+#include <net/netfilter/ipv6/nf_reject.h>
-void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook)
+const struct tcphdr *nf_reject_ip6_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *otcph,
+ unsigned int *otcplen, int hook)
{
- struct sk_buff *nskb;
- struct tcphdr otcph, *tcph;
- unsigned int otcplen, hh_len;
- int tcphoff, needs_ack;
const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
- struct ipv6hdr *ip6h;
-#define DEFAULT_TOS_VALUE 0x0U
- const __u8 tclass = DEFAULT_TOS_VALUE;
- struct dst_entry *dst = NULL;
u8 proto;
__be16 frag_off;
- struct flowi6 fl6;
-
- if ((!(ipv6_addr_type(&oip6h->saddr) & IPV6_ADDR_UNICAST)) ||
- (!(ipv6_addr_type(&oip6h->daddr) & IPV6_ADDR_UNICAST))) {
- pr_debug("addr is not unicast.\n");
- return;
- }
+ int tcphoff;
proto = oip6h->nexthdr;
- tcphoff = ipv6_skip_exthdr(oldskb, ((u8*)(oip6h+1) - oldskb->data), &proto, &frag_off);
+ tcphoff = ipv6_skip_exthdr(oldskb, ((u8*)(oip6h+1) - oldskb->data),
+ &proto, &frag_off);
if ((tcphoff < 0) || (tcphoff > oldskb->len)) {
pr_debug("Cannot get TCP header.\n");
- return;
+ return NULL;
}
- otcplen = oldskb->len - tcphoff;
+ *otcplen = oldskb->len - tcphoff;
/* IP header checks: fragment, too short. */
- if (proto != IPPROTO_TCP || otcplen < sizeof(struct tcphdr)) {
- pr_debug("proto(%d) != IPPROTO_TCP, "
- "or too short. otcplen = %d\n",
- proto, otcplen);
- return;
+ if (proto != IPPROTO_TCP || *otcplen < sizeof(struct tcphdr)) {
+ pr_debug("proto(%d) != IPPROTO_TCP or too short (len = %d)\n",
+ proto, *otcplen);
+ return NULL;
}
- if (skb_copy_bits(oldskb, tcphoff, &otcph, sizeof(struct tcphdr)))
- BUG();
+ otcph = skb_header_pointer(oldskb, tcphoff, sizeof(struct tcphdr),
+ otcph);
+ if (otcph == NULL)
+ return NULL;
/* No RST for RST. */
- if (otcph.rst) {
+ if (otcph->rst) {
pr_debug("RST is set\n");
- return;
+ return NULL;
}
/* Check checksum. */
if (nf_ip6_checksum(oldskb, hook, tcphoff, IPPROTO_TCP)) {
pr_debug("TCP checksum is invalid\n");
- return;
+ return NULL;
}
- memset(&fl6, 0, sizeof(fl6));
- fl6.flowi6_proto = IPPROTO_TCP;
- fl6.saddr = oip6h->daddr;
- fl6.daddr = oip6h->saddr;
- fl6.fl6_sport = otcph.dest;
- fl6.fl6_dport = otcph.source;
- security_skb_classify_flow(oldskb, flowi6_to_flowi(&fl6));
- dst = ip6_route_output(net, NULL, &fl6);
- if (dst == NULL || dst->error) {
- dst_release(dst);
- return;
- }
- dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
- if (IS_ERR(dst))
- return;
-
- hh_len = (dst->dev->hard_header_len + 15)&~15;
- nskb = alloc_skb(hh_len + 15 + dst->header_len + sizeof(struct ipv6hdr)
- + sizeof(struct tcphdr) + dst->trailer_len,
- GFP_ATOMIC);
-
- if (!nskb) {
- net_dbg_ratelimited("cannot alloc skb\n");
- dst_release(dst);
- return;
- }
-
- skb_dst_set(nskb, dst);
+ return otcph;
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip6_tcphdr_get);
- skb_reserve(nskb, hh_len + dst->header_len);
+struct ipv6hdr *nf_reject_ip6hdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int hoplimit)
+{
+ struct ipv6hdr *ip6h;
+ const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
+#define DEFAULT_TOS_VALUE 0x0U
+ const __u8 tclass = DEFAULT_TOS_VALUE;
skb_put(nskb, sizeof(struct ipv6hdr));
skb_reset_network_header(nskb);
ip6h = ipv6_hdr(nskb);
ip6_flow_hdr(ip6h, tclass, 0);
- ip6h->hop_limit = ip6_dst_hoplimit(dst);
- ip6h->nexthdr = IPPROTO_TCP;
+ ip6h->hop_limit = hoplimit;
+ ip6h->nexthdr = protocol;
ip6h->saddr = oip6h->daddr;
ip6h->daddr = oip6h->saddr;
+ nskb->protocol = htons(ETH_P_IPV6);
+
+ return ip6h;
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip6hdr_put);
+
+void nf_reject_ip6_tcphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ const struct tcphdr *oth, unsigned int otcplen)
+{
+ struct tcphdr *tcph;
+ int needs_ack;
+
skb_reset_transport_header(nskb);
tcph = (struct tcphdr *)skb_put(nskb, sizeof(struct tcphdr));
/* Truncate to length (no data) */
tcph->doff = sizeof(struct tcphdr)/4;
- tcph->source = otcph.dest;
- tcph->dest = otcph.source;
+ tcph->source = oth->dest;
+ tcph->dest = oth->source;
- if (otcph.ack) {
+ if (oth->ack) {
needs_ack = 0;
- tcph->seq = otcph.ack_seq;
+ tcph->seq = oth->ack_seq;
tcph->ack_seq = 0;
} else {
needs_ack = 1;
- tcph->ack_seq = htonl(ntohl(otcph.seq) + otcph.syn + otcph.fin
- + otcplen - (otcph.doff<<2));
+ tcph->ack_seq = htonl(ntohl(oth->seq) + oth->syn + oth->fin +
+ otcplen - (oth->doff<<2));
tcph->seq = 0;
}
sizeof(struct tcphdr), IPPROTO_TCP,
csum_partial(tcph,
sizeof(struct tcphdr), 0));
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip6_tcphdr_put);
+
+void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ struct tcphdr _otcph;
+ const struct tcphdr *otcph;
+ unsigned int otcplen, hh_len;
+ const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
+ struct ipv6hdr *ip6h;
+ struct dst_entry *dst = NULL;
+ struct flowi6 fl6;
+
+ if ((!(ipv6_addr_type(&oip6h->saddr) & IPV6_ADDR_UNICAST)) ||
+ (!(ipv6_addr_type(&oip6h->daddr) & IPV6_ADDR_UNICAST))) {
+ pr_debug("addr is not unicast.\n");
+ return;
+ }
+
+ otcph = nf_reject_ip6_tcphdr_get(oldskb, &_otcph, &otcplen, hook);
+ if (!otcph)
+ return;
+
+ memset(&fl6, 0, sizeof(fl6));
+ fl6.flowi6_proto = IPPROTO_TCP;
+ fl6.saddr = oip6h->daddr;
+ fl6.daddr = oip6h->saddr;
+ fl6.fl6_sport = otcph->dest;
+ fl6.fl6_dport = otcph->source;
+ security_skb_classify_flow(oldskb, flowi6_to_flowi(&fl6));
+ dst = ip6_route_output(net, NULL, &fl6);
+ if (dst == NULL || dst->error) {
+ dst_release(dst);
+ return;
+ }
+ dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
+ if (IS_ERR(dst))
+ return;
+
+ hh_len = (dst->dev->hard_header_len + 15)&~15;
+ nskb = alloc_skb(hh_len + 15 + dst->header_len + sizeof(struct ipv6hdr)
+ + sizeof(struct tcphdr) + dst->trailer_len,
+ GFP_ATOMIC);
+
+ if (!nskb) {
+ net_dbg_ratelimited("cannot alloc skb\n");
+ dst_release(dst);
+ return;
+ }
+
+ skb_dst_set(nskb, dst);
+
+ skb_reserve(nskb, hh_len + dst->header_len);
+ ip6h = nf_reject_ip6hdr_put(nskb, oldskb, IPPROTO_TCP,
+ ip6_dst_hoplimit(dst));
+ nf_reject_ip6_tcphdr_put(nskb, oldskb, otcph, otcplen);
nf_ct_attach(nskb, oldskb);
ip6_local_out(nskb);
}
EXPORT_SYMBOL_GPL(nf_send_reset6);
+
+MODULE_LICENSE("GPL");
.eval = nft_masq_ipv6_eval,
.init = nft_masq_init,
.dump = nft_masq_dump,
+ .validate = nft_masq_validate,
};
static struct nft_expr_type nft_masq_ipv6_type __read_mostly = {
* not configured or static. These functions are needed by GSO/GRO implementation.
*/
#include <linux/export.h>
+#include <net/ip.h>
#include <net/ipv6.h>
#include <net/ip6_fib.h>
#include <net/addrconf.h>
#include <net/secure_seq.h>
+/* This function exists only for tap drivers that must support broken
+ * clients requesting UFO without specifying an IPv6 fragment ID.
+ *
+ * This is similar to ipv6_select_ident() but we use an independent hash
+ * seed to limit information leakage.
+ *
+ * The network header must be set before calling this.
+ */
+void ipv6_proxy_select_ident(struct sk_buff *skb)
+{
+ static u32 ip6_proxy_idents_hashrnd __read_mostly;
+ struct in6_addr buf[2];
+ struct in6_addr *addrs;
+ u32 hash, id;
+
+ addrs = skb_header_pointer(skb,
+ skb_network_offset(skb) +
+ offsetof(struct ipv6hdr, saddr),
+ sizeof(buf), buf);
+ if (!addrs)
+ return;
+
+ net_get_random_once(&ip6_proxy_idents_hashrnd,
+ sizeof(ip6_proxy_idents_hashrnd));
+
+ hash = __ipv6_addr_jhash(&addrs[1], ip6_proxy_idents_hashrnd);
+ hash = __ipv6_addr_jhash(&addrs[0], hash);
+
+ id = ip_idents_reserve(hash, 1);
+ skb_shinfo(skb)->ip6_frag_id = htonl(id);
+}
+EXPORT_SYMBOL_GPL(ipv6_proxy_select_ident);
+
int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
{
u16 offset = sizeof(struct ipv6hdr);
sk->sk_v6_daddr = usin->sin6_addr;
np->flow_label = fl6.flowlabel;
- ip6_set_txhash(sk);
-
/*
* TCP over IPv4
*/
if (err)
goto late_failure;
+ ip6_set_txhash(sk);
+
if (!tp->write_seq && likely(!tp->repair))
tp->write_seq = secure_tcpv6_sequence_number(np->saddr.s6_addr32,
sk->sk_v6_daddr.s6_addr32,
case IPPROTO_DCCP:
if (!onlyproto && (nh + offset + 4 < skb->data ||
pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
- __be16 *ports = (__be16 *)exthdr;
+ __be16 *ports;
+ nh = skb_network_header(skb);
+ ports = (__be16 *)(nh + offset);
fl6->fl6_sport = ports[!!reverse];
fl6->fl6_dport = ports[!reverse];
}
case IPPROTO_ICMPV6:
if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) {
- u8 *icmp = (u8 *)exthdr;
+ u8 *icmp;
+ nh = skb_network_header(skb);
+ icmp = (u8 *)(nh + offset);
fl6->fl6_icmp_type = icmp[0];
fl6->fl6_icmp_code = icmp[1];
}
case IPPROTO_MH:
if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
struct ip6_mh *mh;
- mh = (struct ip6_mh *)exthdr;
+ nh = skb_network_header(skb);
+ mh = (struct ip6_mh *)(nh + offset);
fl6->fl6_mh_type = mh->ip6mh_type;
}
fl6->flowi6_proto = nexthdr;
if (sk->sk_state != TCP_ESTABLISHED) {
sock->state = SS_UNCONNECTED;
- if (sk->sk_prot->disconnect(sk, flags))
- sock->state = SS_DISCONNECTING;
err = sock_error(sk);
if (!err)
err = -ECONNRESET;
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (chanctx_conf) {
- *chandef = chanctx_conf->def;
+ *chandef = sdata->vif.bss_conf.chandef;
ret = 0;
} else if (local->open_count > 0 &&
local->open_count == local->monitors &&
*/
if (!(rates[0].flags & IEEE80211_TX_RC_MCS)) {
u32 basic_rates = vif->bss_conf.basic_rates;
- s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0;
+ s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0;
rate = &sband->bitrates[rates[0].idx];
unsigned int i, tp, prob, eprob;
char *p;
- ms = kmalloc(sizeof(*ms) + 4096, GFP_KERNEL);
+ ms = kmalloc(2048, GFP_KERNEL);
if (!ms)
return -ENOMEM;
file->private_data = ms;
p = ms->buf;
- p += sprintf(p, "rate throughput ewma prob this prob "
- "this succ/attempt success attempts\n");
+ p += sprintf(p, "rate tpt eprob *prob"
+ " *ok(*cum) ok( cum)\n");
for (i = 0; i < mi->n_rates; i++) {
struct minstrel_rate *mr = &mi->r[i];
struct minstrel_rate_stats *mrs = &mi->r[i].stats;
prob = MINSTREL_TRUNC(mrs->cur_prob * 1000);
eprob = MINSTREL_TRUNC(mrs->probability * 1000);
- p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u "
- " %3u(%3u) %8llu %8llu\n",
+ p += sprintf(p, " %4u.%1u %3u.%1u %3u.%1u"
+ " %4u(%4u) %9llu(%9llu)\n",
tp / 10, tp % 10,
eprob / 10, eprob % 10,
prob / 10, prob % 10,
mi->sample_packets);
ms->len = p - ms->buf;
+ WARN_ON(ms->len + sizeof(*ms) > 2048);
+
return 0;
}
prob = MINSTREL_TRUNC(mr->cur_prob * 1000);
eprob = MINSTREL_TRUNC(mr->probability * 1000);
- p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u "
- "%3u %3u(%3u) %8llu %8llu\n",
+ p += sprintf(p, " %4u.%1u %3u.%1u %3u.%1u "
+ "%3u %4u(%4u) %9llu(%9llu)\n",
tp / 10, tp % 10,
eprob / 10, eprob % 10,
prob / 10, prob % 10,
return ret;
}
- ms = kmalloc(sizeof(*ms) + 8192, GFP_KERNEL);
+ ms = kmalloc(8192, GFP_KERNEL);
if (!ms)
return -ENOMEM;
file->private_data = ms;
p = ms->buf;
- p += sprintf(p, "type rate throughput ewma prob "
- "this prob retry this succ/attempt success attempts\n");
+ p += sprintf(p, "type rate tpt eprob *prob "
+ "ret *ok(*cum) ok( cum)\n");
+
p = minstrel_ht_stats_dump(mi, max_mcs, p);
for (i = 0; i < max_mcs; i++)
MINSTREL_TRUNC(mi->avg_ampdu_len * 10) % 10);
ms->len = p - ms->buf;
+ WARN_ON(ms->len + sizeof(*ms) > 8192);
+
return nonseekable_open(inode, file);
}
* @known_smps_mode: the smps_mode the client thinks we are in. Relevant for
* AP only.
* @cipher_scheme: optional cipher scheme for this station
+ * @last_tdls_pkt_time: holds the time in jiffies of last TDLS pkt ACKed
*/
struct sta_info {
/* General information, mostly static */
#
# Makefile for MPLS.
#
-obj-y += mpls_gso.o
+obj-$(CONFIG_NET_MPLS_GSO) += mpls_gso.o
__skb_push(skb, skb->mac_len);
/* Segment inner packet. */
- mpls_features = skb->dev->mpls_features & netif_skb_features(skb);
+ mpls_features = skb->dev->mpls_features & features;
segs = skb_mac_gso_segment(skb, mpls_features);
* above pulled. It will be re-pushed after returning
* skb_mac_gso_segment(), an indirect caller of this function.
*/
- __skb_push(skb, skb->data - skb_mac_header(skb));
-
+ __skb_pull(skb, skb->data - skb_mac_header(skb));
out:
return segs;
}
struct ip_set *set;
struct ip_set_net *inst = ip_set_pernet(net);
- if (index > inst->ip_set_max)
+ if (index >= inst->ip_set_max)
return IPSET_INVALID_ID;
nfnl_lock(NFNL_SUBSYS_IPSET);
if (unlikely(crosses_local_route_boundary(skb_af, skb, rt_mode,
local))) {
IP_VS_DBG_RL("We are crossing local and non-local addresses"
- " daddr=%pI4\n", &dest->addr.ip);
+ " daddr=%pI4\n", &daddr);
goto err_put;
}
if (unlikely(crosses_local_route_boundary(skb_af, skb, rt_mode,
local))) {
IP_VS_DBG_RL("We are crossing local and non-local addresses"
- " daddr=%pI6\n", &dest->addr.in6);
+ " daddr=%pI6\n", daddr);
goto err_put;
}
{
/* REPLY */
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
-/*syn*/ { sIV, sS2, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sS2 },
+/*syn*/ { sIV, sS2, sIV, sIV, sIV, sIV, sIV, sSS, sIV, sS2 },
/*
* sNO -> sIV Never reached.
* sSS -> sS2 Simultaneous open
* sFW -> sIV
* sCW -> sIV
* sLA -> sIV
- * sTW -> sIV Reopened connection, but server may not do it.
+ * sTW -> sSS Reopened connection, but server may have switched role
* sCL -> sIV
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
basechain->stats = stats;
} else {
stats = netdev_alloc_pcpu_stats(struct nft_stats);
- if (IS_ERR(stats)) {
+ if (stats == NULL) {
module_put(type->owner);
kfree(basechain);
- return PTR_ERR(stats);
+ return -ENOMEM;
}
rcu_assign_pointer(basechain->stats, stats);
}
.abort = nf_tables_abort,
};
+int nft_chain_validate_dependency(const struct nft_chain *chain,
+ enum nft_chain_type type)
+{
+ const struct nft_base_chain *basechain;
+
+ if (chain->flags & NFT_BASE_CHAIN) {
+ basechain = nft_base_chain(chain);
+ if (basechain->type->type != type)
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nft_chain_validate_dependency);
+
/*
* Loop detection - walk through the ruleset beginning at the destination chain
* of a new jump until either the source chain is reached (loop) or all
#define NFULNL_NLBUFSIZ_DEFAULT NLMSG_GOODSIZE
#define NFULNL_TIMEOUT_DEFAULT 100 /* every second */
#define NFULNL_QTHRESH_DEFAULT 100 /* 100 packets */
-#define NFULNL_COPY_RANGE_MAX 0xFFFF /* max packet size is limited by 16-bit struct nfattr nfa_len field */
+/* max packet size is limited by 16-bit struct nfattr nfa_len field */
+#define NFULNL_COPY_RANGE_MAX (0xFFFF - NLA_HDRLEN)
#define PRINTR(x, args...) do { if (net_ratelimit()) \
printk(x, ## args); } while (0);
case NFULNL_COPY_PACKET:
inst->copy_mode = mode;
+ if (range == 0)
+ range = NFULNL_COPY_RANGE_MAX;
inst->copy_range = min_t(unsigned int,
range, NFULNL_COPY_RANGE_MAX);
break;
return skb;
}
-static int
+static void
__nfulnl_send(struct nfulnl_instance *inst)
{
- int status = -1;
-
if (inst->qlen > 1) {
struct nlmsghdr *nlh = nlmsg_put(inst->skb, 0, 0,
NLMSG_DONE,
sizeof(struct nfgenmsg),
0);
- if (!nlh)
+ if (WARN_ONCE(!nlh, "bad nlskb size: %u, tailroom %d\n",
+ inst->skb->len, skb_tailroom(inst->skb))) {
+ kfree_skb(inst->skb);
goto out;
+ }
}
- status = nfnetlink_unicast(inst->skb, inst->net, inst->peer_portid,
- MSG_DONTWAIT);
-
+ nfnetlink_unicast(inst->skb, inst->net, inst->peer_portid,
+ MSG_DONTWAIT);
+out:
inst->qlen = 0;
inst->skb = NULL;
-out:
- return status;
}
static void
+ nla_total_size(sizeof(u_int32_t)) /* gid */
+ nla_total_size(plen) /* prefix */
+ nla_total_size(sizeof(struct nfulnl_msg_packet_hw))
- + nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp));
+ + nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp))
+ + nla_total_size(sizeof(struct nfgenmsg)); /* NLMSG_DONE */
if (in && skb_mac_header_was_set(skb)) {
size += nla_total_size(skb->dev->hard_header_len)
break;
case NFULNL_COPY_PACKET:
- if (inst->copy_range == 0
- || inst->copy_range > skb->len)
+ if (inst->copy_range > skb->len)
data_len = skb->len;
else
data_len = inst->copy_range;
goto unlock_and_release;
}
- if (inst->skb &&
- size > skb_tailroom(inst->skb) - sizeof(struct nfgenmsg)) {
+ if (inst->skb && size > skb_tailroom(inst->skb)) {
/* either the queue len is too high or we don't have
* enough room in the skb left. flush to userspace. */
__nfulnl_flush(inst);
* returned by nf_queue. For instance, callers rely on -ECANCELED to
* mean 'ignore this hook'.
*/
- if (IS_ERR(segs))
+ if (IS_ERR_OR_NULL(segs))
goto out_err;
queued = 0;
err = 0;
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter_ipv4/ip_tables.h>
#include <linux/netfilter_ipv6/ip6_tables.h>
-#include <asm/uaccess.h> /* for set_fs */
#include <net/netfilter/nf_tables.h>
+static const struct {
+ const char *name;
+ u8 type;
+} table_to_chaintype[] = {
+ { "filter", NFT_CHAIN_T_DEFAULT },
+ { "raw", NFT_CHAIN_T_DEFAULT },
+ { "security", NFT_CHAIN_T_DEFAULT },
+ { "mangle", NFT_CHAIN_T_ROUTE },
+ { "nat", NFT_CHAIN_T_NAT },
+ { },
+};
+
+static int nft_compat_table_to_chaintype(const char *table)
+{
+ int i;
+
+ for (i = 0; table_to_chaintype[i].name != NULL; i++) {
+ if (strcmp(table_to_chaintype[i].name, table) == 0)
+ return table_to_chaintype[i].type;
+ }
+
+ return -1;
+}
+
+static int nft_compat_chain_validate_dependency(const char *tablename,
+ const struct nft_chain *chain)
+{
+ enum nft_chain_type type;
+ const struct nft_base_chain *basechain;
+
+ if (!tablename || !(chain->flags & NFT_BASE_CHAIN))
+ return 0;
+
+ type = nft_compat_table_to_chaintype(tablename);
+ if (type < 0)
+ return -EINVAL;
+
+ basechain = nft_base_chain(chain);
+ if (basechain->type->type != type)
+ return -EINVAL;
+
+ return 0;
+}
+
union nft_entry {
struct ipt_entry e4;
struct ip6t_entry e6;
const struct nf_hook_ops *ops = &basechain->ops[0];
par->hook_mask = 1 << ops->hooknum;
+ } else {
+ par->hook_mask = 0;
}
par->family = ctx->afi->family;
}
union nft_entry e = {};
int ret;
+ ret = nft_compat_chain_validate_dependency(target->table, ctx->chain);
+ if (ret < 0)
+ goto err;
+
target_compat_from_user(target, nla_data(tb[NFTA_TARGET_INFO]), info);
if (ctx->nla[NFTA_RULE_COMPAT]) {
{
struct xt_target *target = expr->ops->data;
unsigned int hook_mask = 0;
+ int ret;
if (ctx->chain->flags & NFT_BASE_CHAIN) {
const struct nft_base_chain *basechain =
const struct nf_hook_ops *ops = &basechain->ops[0];
hook_mask = 1 << ops->hooknum;
- if (hook_mask & target->hooks)
- return 0;
+ if (!(hook_mask & target->hooks))
+ return -EINVAL;
- /* This target is being called from an invalid chain */
- return -EINVAL;
+ ret = nft_compat_chain_validate_dependency(target->table,
+ ctx->chain);
+ if (ret < 0)
+ return ret;
}
return 0;
}
const struct nf_hook_ops *ops = &basechain->ops[0];
par->hook_mask = 1 << ops->hooknum;
+ } else {
+ par->hook_mask = 0;
}
par->family = ctx->afi->family;
}
union nft_entry e = {};
int ret;
+ ret = nft_compat_chain_validate_dependency(match->name, ctx->chain);
+ if (ret < 0)
+ goto err;
+
match_compat_from_user(match, nla_data(tb[NFTA_MATCH_INFO]), info);
if (ctx->nla[NFTA_RULE_COMPAT]) {
{
struct xt_match *match = expr->ops->data;
unsigned int hook_mask = 0;
+ int ret;
if (ctx->chain->flags & NFT_BASE_CHAIN) {
const struct nft_base_chain *basechain =
const struct nf_hook_ops *ops = &basechain->ops[0];
hook_mask = 1 << ops->hooknum;
- if (hook_mask & match->hooks)
- return 0;
+ if (!(hook_mask & match->hooks))
+ return -EINVAL;
- /* This match is being called from an invalid chain */
- return -EINVAL;
+ ret = nft_compat_chain_validate_dependency(match->name,
+ ctx->chain);
+ if (ret < 0)
+ return ret;
}
return 0;
}
family = ctx->afi->family;
/* Re-use the existing target if it's already loaded. */
- list_for_each_entry(nft_target, &nft_match_list, head) {
+ list_for_each_entry(nft_target, &nft_target_list, head) {
struct xt_target *target = nft_target->ops.data;
if (strcmp(target->name, tg_name) == 0 &&
const struct nlattr * const tb[])
{
struct nft_masq *priv = nft_expr_priv(expr);
+ int err;
+
+ err = nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+ if (err < 0)
+ return err;
if (tb[NFTA_MASQ_FLAGS] == NULL)
return 0;
}
EXPORT_SYMBOL_GPL(nft_masq_dump);
+int nft_masq_validate(const struct nft_ctx *ctx, const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+}
+EXPORT_SYMBOL_GPL(nft_masq_validate);
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>");
u32 family;
int err;
- if (tb[NFTA_NAT_TYPE] == NULL)
+ err = nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+ if (err < 0)
+ return err;
+
+ if (tb[NFTA_NAT_TYPE] == NULL ||
+ (tb[NFTA_NAT_REG_ADDR_MIN] == NULL &&
+ tb[NFTA_NAT_REG_PROTO_MIN] == NULL))
return -EINVAL;
switch (ntohl(nla_get_be32(tb[NFTA_NAT_TYPE]))) {
priv->family = family;
if (tb[NFTA_NAT_REG_ADDR_MIN]) {
- priv->sreg_addr_min = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_ADDR_MIN]));
+ priv->sreg_addr_min =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_ADDR_MIN]));
+
err = nft_validate_input_register(priv->sreg_addr_min);
if (err < 0)
return err;
- }
- if (tb[NFTA_NAT_REG_ADDR_MAX]) {
- priv->sreg_addr_max = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_ADDR_MAX]));
- err = nft_validate_input_register(priv->sreg_addr_max);
- if (err < 0)
- return err;
- } else
- priv->sreg_addr_max = priv->sreg_addr_min;
+ if (tb[NFTA_NAT_REG_ADDR_MAX]) {
+ priv->sreg_addr_max =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_ADDR_MAX]));
+
+ err = nft_validate_input_register(priv->sreg_addr_max);
+ if (err < 0)
+ return err;
+ } else {
+ priv->sreg_addr_max = priv->sreg_addr_min;
+ }
+ }
if (tb[NFTA_NAT_REG_PROTO_MIN]) {
- priv->sreg_proto_min = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_PROTO_MIN]));
+ priv->sreg_proto_min =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_PROTO_MIN]));
+
err = nft_validate_input_register(priv->sreg_proto_min);
if (err < 0)
return err;
- }
- if (tb[NFTA_NAT_REG_PROTO_MAX]) {
- priv->sreg_proto_max = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_PROTO_MAX]));
- err = nft_validate_input_register(priv->sreg_proto_max);
- if (err < 0)
- return err;
- } else
- priv->sreg_proto_max = priv->sreg_proto_min;
+ if (tb[NFTA_NAT_REG_PROTO_MAX]) {
+ priv->sreg_proto_max =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_PROTO_MAX]));
+
+ err = nft_validate_input_register(priv->sreg_proto_max);
+ if (err < 0)
+ return err;
+ } else {
+ priv->sreg_proto_max = priv->sreg_proto_min;
+ }
+ }
if (tb[NFTA_NAT_FLAGS]) {
priv->flags = ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
if (nla_put_be32(skb, NFTA_NAT_FAMILY, htonl(priv->family)))
goto nla_put_failure;
- if (nla_put_be32(skb,
- NFTA_NAT_REG_ADDR_MIN, htonl(priv->sreg_addr_min)))
- goto nla_put_failure;
- if (nla_put_be32(skb,
- NFTA_NAT_REG_ADDR_MAX, htonl(priv->sreg_addr_max)))
- goto nla_put_failure;
+
+ if (priv->sreg_addr_min) {
+ if (nla_put_be32(skb, NFTA_NAT_REG_ADDR_MIN,
+ htonl(priv->sreg_addr_min)) ||
+ nla_put_be32(skb, NFTA_NAT_REG_ADDR_MAX,
+ htonl(priv->sreg_addr_max)))
+ goto nla_put_failure;
+ }
+
if (priv->sreg_proto_min) {
if (nla_put_be32(skb, NFTA_NAT_REG_PROTO_MIN,
- htonl(priv->sreg_proto_min)))
- goto nla_put_failure;
- if (nla_put_be32(skb, NFTA_NAT_REG_PROTO_MAX,
+ htonl(priv->sreg_proto_min)) ||
+ nla_put_be32(skb, NFTA_NAT_REG_PROTO_MAX,
htonl(priv->sreg_proto_max)))
goto nla_put_failure;
}
return -1;
}
+static int nft_nat_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+}
+
static struct nft_expr_type nft_nat_type;
static const struct nft_expr_ops nft_nat_ops = {
.type = &nft_nat_type,
.eval = nft_nat_eval,
.init = nft_nat_init,
.dump = nft_nat_dump,
+ .validate = nft_nat_validate,
};
static struct nft_expr_type nft_nat_type __read_mostly = {
static int netlink_dump(struct sock *sk);
static void netlink_skb_destructor(struct sk_buff *skb);
+/* nl_table locking explained:
+ * Lookup and traversal are protected with nl_sk_hash_lock or nl_table_lock
+ * combined with an RCU read-side lock. Insertion and removal are protected
+ * with nl_sk_hash_lock while using RCU list modification primitives and may
+ * run in parallel to nl_table_lock protected lookups. Destruction of the
+ * Netlink socket may only occur *after* nl_table_lock has been acquired
+ * either during or after the socket has been removed from the list.
+ */
DEFINE_RWLOCK(nl_table_lock);
EXPORT_SYMBOL_GPL(nl_table_lock);
static atomic_t nl_table_users = ATOMIC_INIT(0);
static int lockdep_nl_sk_hash_is_held(void)
{
#ifdef CONFIG_LOCKDEP
- return (debug_locks) ? lockdep_is_held(&nl_sk_hash_lock) : 1;
-#else
- return 1;
+ if (debug_locks)
+ return lockdep_is_held(&nl_sk_hash_lock) || lockdep_is_held(&nl_table_lock);
#endif
+ return 1;
}
static ATOMIC_NOTIFIER_HEAD(netlink_chain);
struct netlink_table *table = &nl_table[protocol];
struct sock *sk;
+ read_lock(&nl_table_lock);
rcu_read_lock();
sk = __netlink_lookup(table, portid, net);
if (sk)
sock_hold(sk);
rcu_read_unlock();
+ read_unlock(&nl_table_lock);
return sk;
}
}
netlink_table_ungrab();
- /* Wait for readers to complete */
- synchronize_net();
-
kfree(nlk->groups);
nlk->groups = NULL;
retry:
cond_resched();
+ netlink_table_grab();
rcu_read_lock();
if (__netlink_lookup(table, portid, net)) {
/* Bind collision, search negative portid values. */
if (rover > -4097)
rover = -4097;
rcu_read_unlock();
+ netlink_table_ungrab();
goto retry;
}
rcu_read_unlock();
+ netlink_table_ungrab();
err = netlink_insert(sk, net, portid);
if (err == -EADDRINUSE)
}
static void *netlink_seq_start(struct seq_file *seq, loff_t *pos)
- __acquires(RCU)
+ __acquires(nl_table_lock) __acquires(RCU)
{
+ read_lock(&nl_table_lock);
rcu_read_lock();
return *pos ? netlink_seq_socket_idx(seq, *pos - 1) : SEQ_START_TOKEN;
}
static void *netlink_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
+ struct rhashtable *ht;
struct netlink_sock *nlk;
struct nl_seq_iter *iter;
struct net *net;
iter = seq->private;
nlk = v;
- rht_for_each_entry_rcu(nlk, nlk->node.next, node)
+ i = iter->link;
+ ht = &nl_table[i].hash;
+ rht_for_each_entry(nlk, nlk->node.next, ht, node)
if (net_eq(sock_net((struct sock *)nlk), net))
return nlk;
- i = iter->link;
j = iter->hash_idx + 1;
do {
- struct rhashtable *ht = &nl_table[i].hash;
const struct bucket_table *tbl = rht_dereference_rcu(ht->tbl, ht);
for (; j < tbl->size; j++) {
- rht_for_each_entry_rcu(nlk, tbl->buckets[j], node) {
+ rht_for_each_entry(nlk, tbl->buckets[j], ht, node) {
if (net_eq(sock_net((struct sock *)nlk), net)) {
iter->link = i;
iter->hash_idx = j;
}
static void netlink_seq_stop(struct seq_file *seq, void *v)
- __releases(RCU)
+ __releases(RCU) __releases(nl_table_lock)
{
rcu_read_unlock();
+ read_unlock(&nl_table_lock);
}
segs = __skb_gso_segment(skb, NETIF_F_SG, false);
if (IS_ERR(segs))
return PTR_ERR(segs);
+ if (segs == NULL)
+ return -EINVAL;
/* Queue all of the segments. */
skb = segs;
if (!ops->init || (err = ops->init(sch, tca[TCA_OPTIONS])) == 0) {
if (qdisc_is_percpu_stats(sch)) {
sch->cpu_bstats =
- alloc_percpu(struct gnet_stats_basic_cpu);
+ netdev_alloc_pcpu_stats(struct gnet_stats_basic_cpu);
if (!sch->cpu_bstats)
goto err_out4;
sch->limit = q->params.limit;
setup_timer(&q->adapt_timer, pie_timer, (unsigned long)sch);
- mod_timer(&q->adapt_timer, jiffies + HZ / 2);
if (opt) {
int err = pie_change(sch, opt);
return err;
}
+ mod_timer(&q->adapt_timer, jiffies + HZ / 2);
return 0;
}
void tipc_node_link_up(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
{
struct tipc_link **active = &n_ptr->active_links[0];
- u32 addr = n_ptr->addr;
n_ptr->working_links++;
- tipc_nametbl_publish(TIPC_LINK_STATE, addr, addr, TIPC_NODE_SCOPE,
- l_ptr->bearer_id, addr);
+ n_ptr->action_flags |= TIPC_NOTIFY_LINK_UP;
+ n_ptr->link_id = l_ptr->peer_bearer_id << 16 | l_ptr->bearer_id;
+
pr_info("Established link <%s> on network plane %c\n",
l_ptr->name, l_ptr->net_plane);
void tipc_node_link_down(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
{
struct tipc_link **active;
- u32 addr = n_ptr->addr;
n_ptr->working_links--;
- tipc_nametbl_withdraw(TIPC_LINK_STATE, addr, l_ptr->bearer_id, addr);
+ n_ptr->action_flags |= TIPC_NOTIFY_LINK_DOWN;
+ n_ptr->link_id = l_ptr->peer_bearer_id << 16 | l_ptr->bearer_id;
if (!tipc_link_is_active(l_ptr)) {
pr_info("Lost standby link <%s> on network plane %c\n",
LIST_HEAD(conn_sks);
struct sk_buff_head waiting_sks;
u32 addr = 0;
- unsigned int flags = node->action_flags;
+ int flags = node->action_flags;
+ u32 link_id = 0;
- if (likely(!node->action_flags)) {
+ if (likely(!flags)) {
spin_unlock_bh(&node->lock);
return;
}
+ addr = node->addr;
+ link_id = node->link_id;
__skb_queue_head_init(&waiting_sks);
- if (node->action_flags & TIPC_WAKEUP_USERS) {
+
+ if (flags & TIPC_WAKEUP_USERS)
skb_queue_splice_init(&node->waiting_sks, &waiting_sks);
- node->action_flags &= ~TIPC_WAKEUP_USERS;
- }
- if (node->action_flags & TIPC_NOTIFY_NODE_DOWN) {
+
+ if (flags & TIPC_NOTIFY_NODE_DOWN) {
list_replace_init(&node->nsub, &nsub_list);
list_replace_init(&node->conn_sks, &conn_sks);
- node->action_flags &= ~TIPC_NOTIFY_NODE_DOWN;
}
- if (node->action_flags & TIPC_NOTIFY_NODE_UP) {
- node->action_flags &= ~TIPC_NOTIFY_NODE_UP;
- addr = node->addr;
- }
- node->action_flags &= ~TIPC_WAKEUP_BCAST_USERS;
+ node->action_flags &= ~(TIPC_WAKEUP_USERS | TIPC_NOTIFY_NODE_DOWN |
+ TIPC_NOTIFY_NODE_UP | TIPC_NOTIFY_LINK_UP |
+ TIPC_NOTIFY_LINK_DOWN |
+ TIPC_WAKEUP_BCAST_USERS);
+
spin_unlock_bh(&node->lock);
while (!skb_queue_empty(&waiting_sks))
if (flags & TIPC_WAKEUP_BCAST_USERS)
tipc_bclink_wakeup_users();
- if (addr)
+ if (flags & TIPC_NOTIFY_NODE_UP)
tipc_named_node_up(addr);
+
+ if (flags & TIPC_NOTIFY_LINK_UP)
+ tipc_nametbl_publish(TIPC_LINK_STATE, addr, addr,
+ TIPC_NODE_SCOPE, link_id, addr);
+
+ if (flags & TIPC_NOTIFY_LINK_DOWN)
+ tipc_nametbl_withdraw(TIPC_LINK_STATE, addr,
+ link_id, addr);
}
* TIPC_WAIT_OWN_LINKS_DOWN: wait until peer node is declared down
* TIPC_NOTIFY_NODE_DOWN: notify node is down
* TIPC_NOTIFY_NODE_UP: notify node is up
+ * TIPC_DISTRIBUTE_NAME: publish or withdraw link state name type
*/
enum {
TIPC_WAIT_PEER_LINKS_DOWN = (1 << 1),
TIPC_NOTIFY_NODE_DOWN = (1 << 3),
TIPC_NOTIFY_NODE_UP = (1 << 4),
TIPC_WAKEUP_USERS = (1 << 5),
- TIPC_WAKEUP_BCAST_USERS = (1 << 6)
+ TIPC_WAKEUP_BCAST_USERS = (1 << 6),
+ TIPC_NOTIFY_LINK_UP = (1 << 7),
+ TIPC_NOTIFY_LINK_DOWN = (1 << 8)
};
/**
* @working_links: number of working links to node (both active and standby)
* @link_cnt: number of links to node
* @signature: node instance identifier
+ * @link_id: local and remote bearer ids of changing link, if any
* @nsub: list of "node down" subscriptions monitoring node
* @rcu: rcu struct for tipc_node
*/
int link_cnt;
int working_links;
u32 signature;
+ u32 link_id;
struct list_head nsub;
struct sk_buff_head waiting_sks;
struct list_head conn_sks;
sk = &tsk->sk;
/* Queue message */
- bh_lock_sock(sk);
+ spin_lock_bh(&sk->sk_lock.slock);
if (!sock_owned_by_user(sk)) {
rc = filter_rcv(sk, buf);
if (sk_add_backlog(sk, buf, limit))
rc = -TIPC_ERR_OVERLOAD;
}
- bh_unlock_sock(sk);
+ spin_unlock_bh(&sk->sk_lock.slock);
tipc_sk_put(tsk);
if (likely(!rc))
return 0;
case SIOCGETLINKNAME:
if (copy_from_user(&lnr, argp, sizeof(lnr)))
return -EFAULT;
- if (!tipc_node_get_linkname(lnr.bearer_id, lnr.peer,
+ if (!tipc_node_get_linkname(lnr.bearer_id & 0xffff, lnr.peer,
lnr.linkname, TIPC_MAX_LINK_NAME)) {
if (copy_to_user(argp, &lnr, sizeof(lnr)))
return -EFAULT;
int err;
bool need_new_beacon = false;
int len, i;
+ u32 cs_count;
if (!rdev->ops->channel_switch ||
!(rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH))
if (need_new_beacon && !info->attrs[NL80211_ATTR_CSA_IES])
return -EINVAL;
- params.count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]);
+ /* Even though the attribute is u32, the specification says
+ * u8, so let's make sure we don't overflow.
+ */
+ cs_count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]);
+ if (cs_count > 255)
+ return -EINVAL;
+
+ params.count = cs_count;
if (!need_new_beacon)
goto skip_beacons;
kfree_skb(skb);
if (IS_ERR(segs))
return PTR_ERR(segs);
+ if (segs == NULL)
+ return -EINVAL;
do {
struct sk_buff *nskb = segs->next;
struct xfrm_policy *pol = xdst->pols[0];
struct xfrm_policy_queue *pq = &pol->polq;
- if (unlikely(skb_fclone_busy(skb))) {
+ if (unlikely(skb_fclone_busy(sk, skb))) {
kfree_skb(skb);
return 0;
}
.errstr = "R0 !read_ok",
.result = REJECT,
},
+ {
+ "program doesn't init R0 before exit in all branches",
+ .insns = {
+ BPF_JMP_IMM(BPF_JGE, BPF_REG_1, 0, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 1),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 2),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R0 !read_ok",
+ .result = REJECT,
+ },
{
"stack out of bounds",
.insns = {
err = selinux_nlmsg_lookup(sksec->sclass, nlh->nlmsg_type, &perm);
if (err) {
if (err == -EINVAL) {
- WARN_ONCE(1, "selinux_nlmsg_perm: unrecognized netlink message:"
- " protocol=%hu nlmsg_type=%hu sclass=%hu\n",
- sk->sk_protocol, nlh->nlmsg_type, sksec->sclass);
+ printk(KERN_WARNING
+ "SELinux: unrecognized netlink message:"
+ " protocol=%hu nlmsg_type=%hu sclass=%hu\n",
+ sk->sk_protocol, nlh->nlmsg_type, sksec->sclass);
if (!selinux_enforcing || security_get_allow_unknown())
err = 0;
}
if (err < 0)
return err;
+ if (clear_user(src, sizeof(*src)))
+ return -EFAULT;
if (put_user(status.state, &src->state) ||
compat_put_timespec(&status.trigger_tstamp, &src->trigger_tstamp) ||
compat_put_timespec(&status.tstamp, &src->tstamp) ||
#define SAFFIRE_CLOCK_SOURCE_INTERNAL 0
#define SAFFIRE_CLOCK_SOURCE_SPDIF 1
-/* '1' is absent, why... */
+/* clock sources as returned from register of Saffire Pro 10 and 26 */
#define SAFFIREPRO_CLOCK_SOURCE_INTERNAL 0
+#define SAFFIREPRO_CLOCK_SOURCE_SKIP 1 /* never used on hardware */
#define SAFFIREPRO_CLOCK_SOURCE_SPDIF 2
-#define SAFFIREPRO_CLOCK_SOURCE_ADAT1 3
-#define SAFFIREPRO_CLOCK_SOURCE_ADAT2 4
+#define SAFFIREPRO_CLOCK_SOURCE_ADAT1 3 /* not used on s.pro. 10 */
+#define SAFFIREPRO_CLOCK_SOURCE_ADAT2 4 /* not used on s.pro. 10 */
#define SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK 5
+#define SAFFIREPRO_CLOCK_SOURCE_COUNT 6
/* S/PDIF, ADAT1, ADAT2 is enabled or not. three quadlets */
#define SAFFIREPRO_ENABLE_DIG_IFACES 0x01a4
&data, sizeof(__be32), 0);
}
+static char *const saffirepro_10_clk_src_labels[] = {
+ SND_BEBOB_CLOCK_INTERNAL, "S/PDIF", "Word Clock"
+};
static char *const saffirepro_26_clk_src_labels[] = {
SND_BEBOB_CLOCK_INTERNAL, "S/PDIF", "ADAT1", "ADAT2", "Word Clock"
};
-
-static char *const saffirepro_10_clk_src_labels[] = {
- SND_BEBOB_CLOCK_INTERNAL, "S/PDIF", "Word Clock"
+/* Value maps between registers and labels for SaffirePro 10/26. */
+static const signed char saffirepro_clk_maps[][SAFFIREPRO_CLOCK_SOURCE_COUNT] = {
+ /* SaffirePro 10 */
+ [0] = {
+ [SAFFIREPRO_CLOCK_SOURCE_INTERNAL] = 0,
+ [SAFFIREPRO_CLOCK_SOURCE_SKIP] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_SPDIF] = 1,
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT1] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT2] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK] = 2,
+ },
+ /* SaffirePro 26 */
+ [1] = {
+ [SAFFIREPRO_CLOCK_SOURCE_INTERNAL] = 0,
+ [SAFFIREPRO_CLOCK_SOURCE_SKIP] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_SPDIF] = 1,
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT1] = 2,
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT2] = 3,
+ [SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK] = 4,
+ }
};
+
static int
saffirepro_both_clk_freq_get(struct snd_bebob *bebob, unsigned int *rate)
{
return saffire_write_quad(bebob, SAFFIREPRO_RATE_NOREBOOT, id);
}
+
+/*
+ * query hardware for current clock source, return our internally
+ * used clock index in *id, depending on hardware.
+ */
static int
saffirepro_both_clk_src_get(struct snd_bebob *bebob, unsigned int *id)
{
int err;
- u32 value;
+ u32 value; /* clock source read from hw register */
+ const signed char *map;
err = saffire_read_quad(bebob, SAFFIREPRO_OFFSET_CLOCK_SOURCE, &value);
if (err < 0)
goto end;
- if (bebob->spec->clock->labels == saffirepro_10_clk_src_labels) {
- if (value == SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK)
- *id = 2;
- else if (value == SAFFIREPRO_CLOCK_SOURCE_SPDIF)
- *id = 1;
- } else if (value > 1) {
- *id = value - 1;
+ /* depending on hardware, use a different mapping */
+ if (bebob->spec->clock->labels == saffirepro_10_clk_src_labels)
+ map = saffirepro_clk_maps[0];
+ else
+ map = saffirepro_clk_maps[1];
+
+ /* In a case that this driver cannot handle the value of register. */
+ if (value >= SAFFIREPRO_CLOCK_SOURCE_COUNT || map[value] < 0) {
+ err = -EIO;
+ goto end;
}
+
+ *id = (unsigned int)map[value];
end:
return err;
}
/* 1.The device has its own operation to switch source of clock */
if (clk_spec) {
err = clk_spec->get(bebob, &id);
- if (err < 0)
+ if (err < 0) {
dev_err(&bebob->unit->device,
"fail to get clock source: %d\n", err);
- else if (strncmp(clk_spec->labels[id], SND_BEBOB_CLOCK_INTERNAL,
- strlen(SND_BEBOB_CLOCK_INTERNAL)) == 0)
+ goto end;
+ }
+
+ if (id >= clk_spec->num) {
+ dev_err(&bebob->unit->device,
+ "clock source %d out of range 0..%d\n",
+ id, clk_spec->num - 1);
+ err = -EIO;
+ goto end;
+ }
+
+ if (strncmp(clk_spec->labels[id], SND_BEBOB_CLOCK_INTERNAL,
+ strlen(SND_BEBOB_CLOCK_INTERNAL)) == 0)
*internal = true;
+
goto end;
}
if (err < 0)
goto end;
- *id = (enable_ext & 0x01) | ((enable_word & 0x01) << 1);
+ if (enable_ext == 0)
+ *id = 0;
+ else if (enable_word == 0)
+ *id = 1;
+ else
+ *id = 2;
end:
return err;
}
/* WARQ is at offset 12 */
tmp = (reg & AD_DS_WSMC_WARQ) ?
- (((reg & AD_DS_WSMC_WARQ >> 12) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_WSMC_WARQ) >> 12) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_WSMC_WAST) ? 2 : 1;
snd_iprintf(buffer, "Wave FIFO: %d %s words\n\n", tmp,
/* SYRQ is at offset 4 */
tmp = (reg & AD_DS_WSMC_SYRQ) ?
- (((reg & AD_DS_WSMC_SYRQ >> 4) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_WSMC_SYRQ) >> 4) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_WSMC_WAST) ? 2 : 1;
snd_iprintf(buffer, "Synthesis FIFO: %d %s words\n\n", tmp,
/* ACRQ is at offset 4 */
tmp = (reg & AD_DS_RAMC_ACRQ) ?
- (((reg & AD_DS_RAMC_ACRQ >> 4) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_RAMC_ACRQ) >> 4) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_RAMC_ADST) ? 2 : 1;
snd_iprintf(buffer, "ADC FIFO: %d %s words\n\n", tmp,
/* RERQ is at offset 12 */
tmp = (reg & AD_DS_RAMC_RERQ) ?
- (((reg & AD_DS_RAMC_RERQ >> 12) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_RAMC_RERQ) >> 12) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_RAMC_ADST) ? 2 : 1;
snd_iprintf(buffer, "Resampler FIFO: %d %s words\n\n", tmp,
"{Intel, LPT_LP},"
"{Intel, WPT_LP},"
"{Intel, SPT},"
+ "{Intel, SPT_LP},"
"{Intel, HPT},"
"{Intel, PBG},"
"{Intel, SCH},"
#ifdef CONFIG_SND_DMA_SGBUF
if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_SG) {
struct snd_sg_buf *sgbuf = dmab->private_data;
+ if (chip->driver_type == AZX_DRIVER_CMEDIA)
+ return; /* deal with only CORB/RIRB buffers */
if (on)
set_pages_array_wc(sgbuf->page_table, sgbuf->pages);
else
#ifdef CONFIG_X86
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
- if (!azx_snoop(chip))
+ if (!azx_snoop(chip) && chip->driver_type != AZX_DRIVER_CMEDIA)
area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
#endif
}
/* Sunrise Point */
{ PCI_DEVICE(0x8086, 0xa170),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ /* Sunrise Point-LP */
+ { PCI_DEVICE(0x8086, 0x9d70),
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0a0c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
unsigned int num_eapds;
hda_nid_t eapds[4];
bool dynamic_eapd;
+ hda_nid_t mute_led_eapd;
unsigned int parse_flags; /* flag for snd_hda_parse_pin_defcfg() */
cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, enabled);
}
+/* turn on/off EAPD according to Master switch (inversely!) for mute LED */
+static void cx_auto_vmaster_hook_mute_led(void *private_data, int enabled)
+{
+ struct hda_codec *codec = private_data;
+ struct conexant_spec *spec = codec->spec;
+
+ snd_hda_codec_write(codec, spec->mute_led_eapd, 0,
+ AC_VERB_SET_EAPD_BTLENABLE,
+ enabled ? 0x00 : 0x02);
+}
+
static int cx_auto_build_controls(struct hda_codec *codec)
{
int err;
CXT_FIXUP_TOSHIBA_P105,
CXT_FIXUP_HP_530,
CXT_FIXUP_CAP_MIX_AMP_5047,
+ CXT_FIXUP_MUTE_LED_EAPD,
};
/* for hda_fixup_thinkpad_acpi() */
}
}
+static void cxt_fixup_mute_led_eapd(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct conexant_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->mute_led_eapd = 0x1b;
+ spec->dynamic_eapd = 1;
+ spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook_mute_led;
+ }
+}
+
/*
* Fix max input level on mixer widget to 0dB
* (originally it has 0x2b steps with 0dB offset 0x14)
.type = HDA_FIXUP_FUNC,
.v.func = cxt_fixup_cap_mix_amp_5047,
},
+ [CXT_FIXUP_MUTE_LED_EAPD] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = cxt_fixup_mute_led_eapd,
+ },
};
static const struct snd_pci_quirk cxt5045_fixups[] = {
SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410),
+ SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
{ .id = CXT_PINCFG_LEMOTE_A1004, .name = "lemote-a1004" },
{ .id = CXT_PINCFG_LEMOTE_A1205, .name = "lemote-a1205" },
{ .id = CXT_FIXUP_OLPC_XO, .name = "olpc-xo" },
+ { .id = CXT_FIXUP_MUTE_LED_EAPD, .name = "mute-led-eapd" },
{}
};
snd_hda_jack_unsol_event(codec, res >> 2);
}
-/* additional initialization for ALC888 variants */
-static void alc888_coef_init(struct hda_codec *codec)
+/* Change EAPD to verb control */
+static void alc_fill_eapd_coef(struct hda_codec *codec)
{
- if (alc_get_coef0(codec) == 0x20)
- /* alc888S-VC */
- alc_write_coef_idx(codec, 7, 0x830);
- else
- /* alc888-VB */
- alc_write_coef_idx(codec, 7, 0x3030);
+ int coef;
+
+ coef = alc_get_coef0(codec);
+
+ switch (codec->vendor_id) {
+ case 0x10ec0262:
+ alc_update_coef_idx(codec, 0x7, 0, 1<<5);
+ break;
+ case 0x10ec0267:
+ case 0x10ec0268:
+ alc_update_coef_idx(codec, 0x7, 0, 1<<13);
+ break;
+ case 0x10ec0269:
+ if ((coef & 0x00f0) == 0x0010)
+ alc_update_coef_idx(codec, 0xd, 0, 1<<14);
+ if ((coef & 0x00f0) == 0x0020)
+ alc_update_coef_idx(codec, 0x4, 1<<15, 0);
+ if ((coef & 0x00f0) == 0x0030)
+ alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+ break;
+ case 0x10ec0280:
+ case 0x10ec0284:
+ case 0x10ec0290:
+ case 0x10ec0292:
+ alc_update_coef_idx(codec, 0x4, 1<<15, 0);
+ break;
+ case 0x10ec0233:
+ case 0x10ec0255:
+ case 0x10ec0282:
+ case 0x10ec0283:
+ case 0x10ec0286:
+ case 0x10ec0288:
+ alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+ break;
+ case 0x10ec0285:
+ case 0x10ec0293:
+ alc_update_coef_idx(codec, 0xa, 1<<13, 0);
+ break;
+ case 0x10ec0662:
+ if ((coef & 0x00f0) == 0x0030)
+ alc_update_coef_idx(codec, 0x4, 1<<10, 0); /* EAPD Ctrl */
+ break;
+ case 0x10ec0272:
+ case 0x10ec0273:
+ case 0x10ec0663:
+ case 0x10ec0665:
+ case 0x10ec0670:
+ case 0x10ec0671:
+ case 0x10ec0672:
+ alc_update_coef_idx(codec, 0xd, 0, 1<<14); /* EAPD Ctrl */
+ break;
+ case 0x10ec0668:
+ alc_update_coef_idx(codec, 0x7, 3<<13, 0);
+ break;
+ case 0x10ec0867:
+ alc_update_coef_idx(codec, 0x4, 1<<10, 0);
+ break;
+ case 0x10ec0888:
+ if ((coef & 0x00f0) == 0x0020 || (coef & 0x00f0) == 0x0030)
+ alc_update_coef_idx(codec, 0x7, 1<<5, 0);
+ break;
+ case 0x10ec0892:
+ alc_update_coef_idx(codec, 0x7, 1<<5, 0);
+ break;
+ case 0x10ec0899:
+ case 0x10ec0900:
+ alc_update_coef_idx(codec, 0x7, 1<<1, 0);
+ break;
+ }
}
-/* additional initialization for ALC889 variants */
-static void alc889_coef_init(struct hda_codec *codec)
+/* additional initialization for ALC888 variants */
+static void alc888_coef_init(struct hda_codec *codec)
{
- alc_update_coef_idx(codec, 7, 0, 0x2010);
+ switch (alc_get_coef0(codec) & 0x00f0) {
+ /* alc888-VA */
+ case 0x00:
+ /* alc888-VB */
+ case 0x10:
+ alc_update_coef_idx(codec, 7, 0, 0x2030); /* Turn EAPD to High */
+ break;
+ }
}
/* turn on/off EAPD control (only if available) */
/* generic EAPD initialization */
static void alc_auto_init_amp(struct hda_codec *codec, int type)
{
+ alc_fill_eapd_coef(codec);
alc_auto_setup_eapd(codec, true);
switch (type) {
case ALC_INIT_GPIO1:
case 0x10ec0260:
alc_update_coefex_idx(codec, 0x1a, 7, 0, 0x2010);
break;
- case 0x10ec0262:
case 0x10ec0880:
case 0x10ec0882:
case 0x10ec0883:
case 0x10ec0885:
- case 0x10ec0887:
- /*case 0x10ec0889:*/ /* this causes an SPDIF problem */
- case 0x10ec0900:
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
break;
case 0x10ec0888:
alc888_coef_init(codec);
break;
-#if 0 /* XXX: This may cause the silent output on speaker on some machines */
- case 0x10ec0267:
- case 0x10ec0268:
- alc_update_coef_idx(codec, 7, 0, 0x3000);
- break;
-#endif /* XXX */
}
break;
}
{
if (action != HDA_FIXUP_ACT_INIT)
return;
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
}
/* toggle speaker-output according to the hp-jack state */
static struct coef_fw alc282_coefs[] = {
WRITE_COEF(0x03, 0x0002), /* Power Down Control */
- WRITE_COEF(0x05, 0x0700), /* FIFO and filter clock */
+ UPDATE_COEF(0x05, 0xff3f, 0x0700), /* FIFO and filter clock */
WRITE_COEF(0x07, 0x0200), /* DMIC control */
UPDATE_COEF(0x06, 0x00f0, 0), /* Analog clock */
UPDATE_COEF(0x08, 0xfffc, 0x0c2c), /* JD */
static struct coef_fw alc283_coefs[] = {
WRITE_COEF(0x03, 0x0002), /* Power Down Control */
- WRITE_COEF(0x05, 0x0700), /* FIFO and filter clock */
+ UPDATE_COEF(0x05, 0xff3f, 0x0700), /* FIFO and filter clock */
WRITE_COEF(0x07, 0x0200), /* DMIC control */
UPDATE_COEF(0x06, 0x00f0, 0), /* Analog clock */
UPDATE_COEF(0x08, 0xfffc, 0x0c2c), /* JD */
UPDATE_COEF(0x40, 0xf800, 0x9800), /* Class D DC enable */
UPDATE_COEF(0x42, 0xf000, 0x2000), /* DC offset */
WRITE_COEF(0x37, 0xfc06), /* Class D amp control */
+ UPDATE_COEF(0x1b, 0x8000, 0), /* HP JD control */
{}
};
}
}
+static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ /* Like hp_gpio_mic1_led, but also needs GPIO4 low to enable headphone amp */
+ struct alc_spec *spec = codec->spec;
+ static const struct hda_verb gpio_init[] = {
+ { 0x01, AC_VERB_SET_GPIO_MASK, 0x18 },
+ { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x18 },
+ {}
+ };
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook;
+ spec->gen.cap_sync_hook = alc269_fixup_hp_cap_mic_mute_hook;
+ spec->gpio_led = 0;
+ spec->cap_mute_led_nid = 0x18;
+ snd_hda_add_verbs(codec, gpio_init);
+ codec->power_filter = led_power_filter;
+ }
+}
+
static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
ALC283_FIXUP_BXBT2807_MIC,
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED,
ALC282_FIXUP_ASPIRE_V5_PINS,
+ ALC280_FIXUP_HP_GPIO4,
};
static const struct hda_fixup alc269_fixups[] = {
{ },
},
},
-
+ [ALC280_FIXUP_HP_GPIO4] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc280_fixup_hp_gpio4,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x8004, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
/* ALC290 */
SND_PCI_QUIRK(0x103c, 0x221b, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2221, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2225, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2246, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2247, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2248, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2249, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2253, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2254, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2255, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2258, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2265, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2277, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2278, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x227f, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2282, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x17aa, 0x220e, "Thinkpad T440p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2210, "Thinkpad T540p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK),
- SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
+ SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP),
SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
{0x17, 0x40000000},
{0x1d, 0x40700001},
{0x21, 0x02211040}),
+ SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4,
+ {0x12, 0x90a60130},
+ {0x13, 0x40000000},
+ {0x14, 0x90170110},
+ {0x15, 0x0421101f},
+ {0x16, 0x411111f0},
+ {0x17, 0x411111f0},
+ {0x18, 0x411111f0},
+ {0x19, 0x411111f0},
+ {0x1a, 0x04a11020},
+ {0x1b, 0x411111f0},
+ {0x1d, 0x40748605},
+ {0x1e, 0x411111f0}),
SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED,
{0x12, 0x90a60140},
{0x13, 0x40000000},
}
}
- /* Class D */
- alc_update_coef_idx(codec, 0xd, 0, 1<<14);
-
/* HP */
alc_update_coef_idx(codec, 0x4, 0, 1<<11);
}
}
}
+static struct coef_fw alc668_coefs[] = {
+ WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0),
+ WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80),
+ WRITE_COEF(0x08, 0x0031), WRITE_COEF(0x0a, 0x0060), WRITE_COEF(0x0b, 0x0),
+ WRITE_COEF(0x0c, 0x7cf7), WRITE_COEF(0x0d, 0x1080), WRITE_COEF(0x0e, 0x7f7f),
+ WRITE_COEF(0x0f, 0xcccc), WRITE_COEF(0x10, 0xddcc), WRITE_COEF(0x11, 0x0001),
+ WRITE_COEF(0x13, 0x0), WRITE_COEF(0x14, 0x2aa0), WRITE_COEF(0x17, 0xa940),
+ WRITE_COEF(0x19, 0x0), WRITE_COEF(0x1a, 0x0), WRITE_COEF(0x1b, 0x0),
+ WRITE_COEF(0x1c, 0x0), WRITE_COEF(0x1d, 0x0), WRITE_COEF(0x1e, 0x7418),
+ WRITE_COEF(0x1f, 0x0804), WRITE_COEF(0x20, 0x4200), WRITE_COEF(0x21, 0x0468),
+ WRITE_COEF(0x22, 0x8ccc), WRITE_COEF(0x23, 0x0250), WRITE_COEF(0x24, 0x7418),
+ WRITE_COEF(0x27, 0x0), WRITE_COEF(0x28, 0x8ccc), WRITE_COEF(0x2a, 0xff00),
+ WRITE_COEF(0x2b, 0x8000), WRITE_COEF(0xa7, 0xff00), WRITE_COEF(0xa8, 0x8000),
+ WRITE_COEF(0xaa, 0x2e17), WRITE_COEF(0xab, 0xa0c0), WRITE_COEF(0xac, 0x0),
+ WRITE_COEF(0xad, 0x0), WRITE_COEF(0xae, 0x2ac6), WRITE_COEF(0xaf, 0xa480),
+ WRITE_COEF(0xb0, 0x0), WRITE_COEF(0xb1, 0x0), WRITE_COEF(0xb2, 0x0),
+ WRITE_COEF(0xb3, 0x0), WRITE_COEF(0xb4, 0x0), WRITE_COEF(0xb5, 0x1040),
+ WRITE_COEF(0xb6, 0xd697), WRITE_COEF(0xb7, 0x902b), WRITE_COEF(0xb8, 0xd697),
+ WRITE_COEF(0xb9, 0x902b), WRITE_COEF(0xba, 0xb8ba), WRITE_COEF(0xbb, 0xaaab),
+ WRITE_COEF(0xbc, 0xaaaf), WRITE_COEF(0xbd, 0x6aaa), WRITE_COEF(0xbe, 0x1c02),
+ WRITE_COEF(0xc0, 0x00ff), WRITE_COEF(0xc1, 0x0fa6),
+ {}
+};
+
+static void alc668_restore_default_value(struct hda_codec *codec)
+{
+ alc_process_coef_fw(codec, alc668_coefs);
+}
+
enum {
ALC662_FIXUP_ASPIRE,
ALC662_FIXUP_LED_GPIO1,
SND_PCI_QUIRK(0x1028, 0x0626, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0696, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_BASS_1A),
SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_MODE4_CHMAP),
{}
};
-static void alc662_fill_coef(struct hda_codec *codec)
-{
- int coef;
-
- coef = alc_get_coef0(codec);
-
- switch (codec->vendor_id) {
- case 0x10ec0662:
- if ((coef & 0x00f0) == 0x0030)
- alc_update_coef_idx(codec, 0x4, 1<<10, 0); /* EAPD Ctrl */
- break;
- case 0x10ec0272:
- case 0x10ec0273:
- case 0x10ec0663:
- case 0x10ec0665:
- case 0x10ec0670:
- case 0x10ec0671:
- case 0x10ec0672:
- alc_update_coef_idx(codec, 0xd, 0, 1<<14); /* EAPD Ctrl */
- break;
- }
-}
-
/*
*/
static int patch_alc662(struct hda_codec *codec)
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- spec->init_hook = alc662_fill_coef;
- alc662_fill_coef(codec);
+ switch (codec->vendor_id) {
+ case 0x10ec0668:
+ spec->init_hook = alc668_restore_default_value;
+ break;
+ }
snd_hda_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
source "sound/soc/pxa/Kconfig"
source "sound/soc/rockchip/Kconfig"
source "sound/soc/samsung/Kconfig"
-source "sound/soc/s6000/Kconfig"
source "sound/soc/sh/Kconfig"
source "sound/soc/sirf/Kconfig"
source "sound/soc/spear/Kconfig"
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += rockchip/
obj-$(CONFIG_SND_SOC) += samsung/
-obj-$(CONFIG_SND_SOC) += s6000/
obj-$(CONFIG_SND_SOC) += sh/
obj-$(CONFIG_SND_SOC) += sirf/
obj-$(CONFIG_SND_SOC) += spear/
2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Slew Clock", ADAU1761_CLK_ENABLE0, 6, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("ALC Clock", ADAU1761_CLK_ENABLE0, 5, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("Digital Clock 0", 1, ADAU1761_CLK_ENABLE1,
0, 0, NULL, 0),
{ "Right Playback Mixer", NULL, "Slew Clock" },
{ "Left Playback Mixer", NULL, "Slew Clock" },
+ { "Left Input Mixer", NULL, "ALC Clock" },
+ { "Right Input Mixer", NULL, "ALC Clock" },
+
{ "Digital Clock 0", NULL, "SYSCLK" },
{ "Digital Clock 1", NULL, "SYSCLK" },
};
return -ENOMEM;
asrc_priv->pdev = pdev;
- strcpy(asrc_priv->name, np->name);
+ strncpy(asrc_priv->name, np->name, sizeof(asrc_priv->name) - 1);
/* Get the addresses and IRQ */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
return -ENOMEM;
esai_priv->pdev = pdev;
- strcpy(esai_priv->name, np->name);
+ strncpy(esai_priv->name, np->name, sizeof(esai_priv->name) - 1);
/* Get the addresses and IRQ */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
}
#define HSW_FORMATS \
- (SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S24_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE |\
- SNDRV_PCM_FMTBIT_S8)
+ (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S16_LE)
static struct snd_soc_dai_driver hsw_dais[] = {
{
+++ /dev/null
-config SND_S6000_SOC
- tristate "SoC Audio for the Stretch s6000 family"
- depends on XTENSA_VARIANT_S6000 || COMPILE_TEST
- depends on HAS_IOMEM
- select SND_S6000_SOC_PCM if XTENSA_VARIANT_S6000
- help
- Say Y or M if you want to add support for codecs attached to
- s6000 family chips. You will also need to select the platform
- to support below.
-
-config SND_S6000_SOC_PCM
- tristate
-
-config SND_S6000_SOC_I2S
- tristate
-
-config SND_S6000_SOC_S6IPCAM
- bool "SoC Audio support for Stretch 6105 IP Camera"
- depends on SND_S6000_SOC=y
- depends on I2C=y
- depends on XTENSA_PLATFORM_S6105 || COMPILE_TEST
- select SND_S6000_SOC_I2S
- select SND_SOC_TLV320AIC3X
- help
- Say Y if you want to add support for SoC audio on the
- Stretch s6105 IP Camera Reference Design.
+++ /dev/null
-# s6000 Platform Support
-snd-soc-s6000-objs := s6000-pcm.o
-snd-soc-s6000-i2s-objs := s6000-i2s.o
-
-obj-$(CONFIG_SND_S6000_SOC_PCM) += snd-soc-s6000.o
-obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o
-
-# s6105 Machine Support
-snd-soc-s6ipcam-objs := s6105-ipcam.o
-
-obj-$(CONFIG_SND_S6000_SOC_S6IPCAM) += snd-soc-s6ipcam.o
+++ /dev/null
-/*
- * ALSA SoC I2S Audio Layer for the Stretch S6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include "s6000-i2s.h"
-#include "s6000-pcm.h"
-
-struct s6000_i2s_dev {
- dma_addr_t sifbase;
- u8 __iomem *scbbase;
- unsigned int wide;
- unsigned int channel_in;
- unsigned int channel_out;
- unsigned int lines_in;
- unsigned int lines_out;
- struct s6000_pcm_dma_params dma_params;
-};
-
-#define S6_I2S_INTERRUPT_STATUS 0x00
-#define S6_I2S_INT_OVERRUN 1
-#define S6_I2S_INT_UNDERRUN 2
-#define S6_I2S_INT_ALIGNMENT 4
-#define S6_I2S_INTERRUPT_ENABLE 0x04
-#define S6_I2S_INTERRUPT_RAW 0x08
-#define S6_I2S_INTERRUPT_CLEAR 0x0C
-#define S6_I2S_INTERRUPT_SET 0x10
-#define S6_I2S_MODE 0x20
-#define S6_I2S_DUAL 0
-#define S6_I2S_WIDE 1
-#define S6_I2S_TX_DEFAULT 0x24
-#define S6_I2S_DATA_CFG(c) (0x40 + 0x10 * (c))
-#define S6_I2S_IN 0
-#define S6_I2S_OUT 1
-#define S6_I2S_UNUSED 2
-#define S6_I2S_INTERFACE_CFG(c) (0x44 + 0x10 * (c))
-#define S6_I2S_DIV_MASK 0x001fff
-#define S6_I2S_16BIT 0x000000
-#define S6_I2S_20BIT 0x002000
-#define S6_I2S_24BIT 0x004000
-#define S6_I2S_32BIT 0x006000
-#define S6_I2S_BITS_MASK 0x006000
-#define S6_I2S_MEM_16BIT 0x000000
-#define S6_I2S_MEM_32BIT 0x008000
-#define S6_I2S_MEM_MASK 0x008000
-#define S6_I2S_CHANNELS_SHIFT 16
-#define S6_I2S_CHANNELS_MASK 0x030000
-#define S6_I2S_SCK_IN 0x000000
-#define S6_I2S_SCK_OUT 0x040000
-#define S6_I2S_SCK_DIR 0x040000
-#define S6_I2S_WS_IN 0x000000
-#define S6_I2S_WS_OUT 0x080000
-#define S6_I2S_WS_DIR 0x080000
-#define S6_I2S_LEFT_FIRST 0x000000
-#define S6_I2S_RIGHT_FIRST 0x100000
-#define S6_I2S_FIRST 0x100000
-#define S6_I2S_CUR_SCK 0x200000
-#define S6_I2S_CUR_WS 0x400000
-#define S6_I2S_ENABLE(c) (0x48 + 0x10 * (c))
-#define S6_I2S_DISABLE_IF 0x02
-#define S6_I2S_ENABLE_IF 0x03
-#define S6_I2S_IS_BUSY 0x04
-#define S6_I2S_DMA_ACTIVE 0x08
-#define S6_I2S_IS_ENABLED 0x10
-
-#define S6_I2S_NUM_LINES 4
-
-#define S6_I2S_SIF_PORT0 0x0000000
-#define S6_I2S_SIF_PORT1 0x0000080 /* docs say 0x0000010 */
-
-static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val)
-{
- writel(val, dev->scbbase + reg);
-}
-
-static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg)
-{
- return readl(dev->scbbase + reg);
-}
-
-static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg,
- u32 mask, u32 val)
-{
- val ^= s6_i2s_read_reg(dev, reg) & ~mask;
- s6_i2s_write_reg(dev, reg, val);
-}
-
-static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel)
-{
- int i, j, cur, prev;
-
- /*
- * Wait for WCLK to toggle 5 times before enabling the channel
- * s6000 Family Datasheet 3.6.4:
- * "At least two cycles of WS must occur between commands
- * to disable or enable the interface"
- */
- j = 0;
- prev = ~S6_I2S_CUR_WS;
- for (i = 1000000; --i && j < 6; ) {
- cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel))
- & S6_I2S_CUR_WS;
- if (prev != cur) {
- prev = cur;
- j++;
- }
- }
- if (j < 6)
- printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n");
-
- s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF);
-}
-
-static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel)
-{
- s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF);
-}
-
-static void s6000_i2s_start(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
- int channel;
-
- channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- dev->channel_out : dev->channel_in;
-
- s6000_i2s_start_channel(dev, channel);
-}
-
-static void s6000_i2s_stop(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
- int channel;
-
- channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- dev->channel_out : dev->channel_in;
-
- s6000_i2s_stop_channel(dev, channel);
-}
-
-static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
- int after)
-{
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after)
- s6000_i2s_start(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (!after)
- s6000_i2s_stop(substream);
- }
- return 0;
-}
-
-static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev)
-{
- unsigned int pending;
- pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW);
- pending &= S6_I2S_INT_ALIGNMENT |
- S6_I2S_INT_UNDERRUN |
- S6_I2S_INT_OVERRUN;
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending);
-
- return pending;
-}
-
-static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
- unsigned int errors;
- unsigned int ret;
-
- errors = s6000_i2s_int_sources(dev);
- if (likely(!errors))
- return 0;
-
- ret = 0;
- if (errors & S6_I2S_INT_ALIGNMENT)
- printk(KERN_ERR "s6000-i2s: WCLK misaligned\n");
- if (errors & S6_I2S_INT_UNDERRUN)
- ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK;
- if (errors & S6_I2S_INT_OVERRUN)
- ret |= 1 << SNDRV_PCM_STREAM_CAPTURE;
- return ret;
-}
-
-static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev)
-{
- int channel;
- int n = 50;
- for (channel = 0; channel < 2; channel++) {
- while (--n >= 0) {
- int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel));
- if ((v & S6_I2S_IS_ENABLED)
- || !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY)))
- break;
- udelay(20);
- }
- }
- if (n < 0)
- printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces");
-}
-
-static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
- u32 w;
-
- switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBM_CFM:
- w = S6_I2S_SCK_IN | S6_I2S_WS_IN;
- break;
- case SND_SOC_DAIFMT_CBS_CFM:
- w = S6_I2S_SCK_OUT | S6_I2S_WS_IN;
- break;
- case SND_SOC_DAIFMT_CBM_CFS:
- w = S6_I2S_SCK_IN | S6_I2S_WS_OUT;
- break;
- case SND_SOC_DAIFMT_CBS_CFS:
- w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT;
- break;
- default:
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- w |= S6_I2S_LEFT_FIRST;
- break;
- case SND_SOC_DAIFMT_NB_IF:
- w |= S6_I2S_RIGHT_FIRST;
- break;
- default:
- return -EINVAL;
- }
-
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0),
- S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1),
- S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
-
- return 0;
-}
-
-static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
-
- if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2)
- return -EINVAL;
-
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id),
- S6_I2S_DIV_MASK, div / 2 - 1);
- return 0;
-}
-
-static int s6000_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- int interf;
- u32 w = 0;
-
- if (dev->wide)
- interf = 0;
- else {
- w |= (((params_channels(params) - 2) / 2)
- << S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK;
- interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ? dev->channel_out : dev->channel_in;
- }
-
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT;
- break;
- default:
- printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n",
- params_format(params));
- return -EINVAL;
- }
-
- if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf))
- & S6_I2S_IS_ENABLED) {
- printk(KERN_ERR "s6000-i2s: interface already enabled\n");
- return -EBUSY;
- }
-
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf),
- S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK,
- w);
-
- return 0;
-}
-
-static int s6000_i2s_dai_probe(struct snd_soc_dai *dai)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- struct s6000_snd_platform_data *pdata = dai->dev->platform_data;
-
- if (!pdata)
- return -EINVAL;
-
- dai->capture_dma_data = &dev->dma_params;
- dai->playback_dma_data = &dev->dma_params;
-
- dev->wide = pdata->wide;
- dev->channel_in = pdata->channel_in;
- dev->channel_out = pdata->channel_out;
- dev->lines_in = pdata->lines_in;
- dev->lines_out = pdata->lines_out;
-
- s6_i2s_write_reg(dev, S6_I2S_MODE,
- dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL);
-
- if (dev->wide) {
- int i;
-
- if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES)
- return -EINVAL;
-
- dev->channel_in = 0;
- dev->channel_out = 1;
- dai->driver->capture.channels_min = 2 * dev->lines_in;
- dai->driver->capture.channels_max = dai->driver->capture.channels_min;
- dai->driver->playback.channels_min = 2 * dev->lines_out;
- dai->driver->playback.channels_max = dai->driver->playback.channels_min;
-
- for (i = 0; i < dev->lines_out; i++)
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT);
-
- for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++)
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i),
- S6_I2S_UNUSED);
-
- for (; i < S6_I2S_NUM_LINES; i++)
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN);
- } else {
- unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED};
-
- if (dev->lines_in > 1 || dev->lines_out > 1)
- return -EINVAL;
-
- dai->driver->capture.channels_min = 2 * dev->lines_in;
- dai->driver->capture.channels_max = 8 * dev->lines_in;
- dai->driver->playback.channels_min = 2 * dev->lines_out;
- dai->driver->playback.channels_max = 8 * dev->lines_out;
-
- if (dev->lines_in)
- cfg[dev->channel_in] = S6_I2S_IN;
- if (dev->lines_out)
- cfg[dev->channel_out] = S6_I2S_OUT;
-
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]);
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]);
- }
-
- if (dev->lines_out) {
- if (dev->lines_in) {
- if (!dev->dma_params.dma_out)
- return -ENODEV;
- } else {
- dev->dma_params.dma_out = dev->dma_params.dma_in;
- dev->dma_params.dma_in = 0;
- }
- }
- dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ?
- S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
- dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ?
- S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
- dev->dma_params.same_rate = pdata->same_rate | pdata->wide;
- return 0;
-}
-
-#define S6000_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
-#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
-
-static const struct snd_soc_dai_ops s6000_i2s_dai_ops = {
- .set_fmt = s6000_i2s_set_dai_fmt,
- .set_clkdiv = s6000_i2s_set_clkdiv,
- .hw_params = s6000_i2s_hw_params,
-};
-
-static struct snd_soc_dai_driver s6000_i2s_dai = {
- .probe = s6000_i2s_dai_probe,
- .playback = {
- .channels_min = 2,
- .channels_max = 8,
- .formats = S6000_I2S_FORMATS,
- .rates = S6000_I2S_RATES,
- .rate_min = 0,
- .rate_max = 1562500,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 8,
- .formats = S6000_I2S_FORMATS,
- .rates = S6000_I2S_RATES,
- .rate_min = 0,
- .rate_max = 1562500,
- },
- .ops = &s6000_i2s_dai_ops,
-};
-
-static const struct snd_soc_component_driver s6000_i2s_component = {
- .name = "s6000-i2s",
-};
-
-static int s6000_i2s_probe(struct platform_device *pdev)
-{
- struct s6000_i2s_dev *dev;
- struct resource *scbmem, *sifmem, *region, *dma1, *dma2;
- u8 __iomem *mmio;
- int ret;
-
- scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!scbmem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- ret = -ENODEV;
- goto err_release_none;
- }
-
- region = request_mem_region(scbmem->start, resource_size(scbmem),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "I2S SCB region already claimed\n");
- ret = -EBUSY;
- goto err_release_none;
- }
-
- mmio = ioremap(scbmem->start, resource_size(scbmem));
- if (!mmio) {
- dev_err(&pdev->dev, "can't ioremap SCB region\n");
- ret = -ENOMEM;
- goto err_release_scb;
- }
-
- sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!sifmem) {
- dev_err(&pdev->dev, "no second mem resource?\n");
- ret = -ENODEV;
- goto err_release_map;
- }
-
- region = request_mem_region(sifmem->start, resource_size(sifmem),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "I2S SIF region already claimed\n");
- ret = -EBUSY;
- goto err_release_map;
- }
-
- dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!dma1) {
- dev_err(&pdev->dev, "no dma resource?\n");
- ret = -ENODEV;
- goto err_release_sif;
- }
-
- region = request_mem_region(dma1->start, resource_size(dma1),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "I2S DMA region already claimed\n");
- ret = -EBUSY;
- goto err_release_sif;
- }
-
- dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (dma2) {
- region = request_mem_region(dma2->start, resource_size(dma2),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev,
- "I2S DMA region already claimed\n");
- ret = -EBUSY;
- goto err_release_dma1;
- }
- }
-
- dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL);
- if (!dev) {
- ret = -ENOMEM;
- goto err_release_dma2;
- }
- dev_set_drvdata(&pdev->dev, dev);
-
- dev->sifbase = sifmem->start;
- dev->scbbase = mmio;
-
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR,
- S6_I2S_INT_ALIGNMENT |
- S6_I2S_INT_UNDERRUN |
- S6_I2S_INT_OVERRUN);
-
- s6000_i2s_stop_channel(dev, 0);
- s6000_i2s_stop_channel(dev, 1);
- s6000_i2s_wait_disabled(dev);
-
- dev->dma_params.check_xrun = s6000_i2s_check_xrun;
- dev->dma_params.trigger = s6000_i2s_trigger;
- dev->dma_params.dma_in = dma1->start;
- dev->dma_params.dma_out = dma2 ? dma2->start : 0;
- dev->dma_params.irq = platform_get_irq(pdev, 0);
- if (dev->dma_params.irq < 0) {
- dev_err(&pdev->dev, "no irq resource?\n");
- ret = -ENODEV;
- goto err_release_dev;
- }
-
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE,
- S6_I2S_INT_ALIGNMENT |
- S6_I2S_INT_UNDERRUN |
- S6_I2S_INT_OVERRUN);
-
- ret = snd_soc_register_component(&pdev->dev, &s6000_i2s_component,
- &s6000_i2s_dai, 1);
- if (ret)
- goto err_release_dev;
-
- return 0;
-
-err_release_dev:
- kfree(dev);
-err_release_dma2:
- if (dma2)
- release_mem_region(dma2->start, resource_size(dma2));
-err_release_dma1:
- release_mem_region(dma1->start, resource_size(dma1));
-err_release_sif:
- release_mem_region(sifmem->start, resource_size(sifmem));
-err_release_map:
- iounmap(mmio);
-err_release_scb:
- release_mem_region(scbmem->start, resource_size(scbmem));
-err_release_none:
- return ret;
-}
-
-static int s6000_i2s_remove(struct platform_device *pdev)
-{
- struct s6000_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
- struct resource *region;
- void __iomem *mmio = dev->scbbase;
-
- snd_soc_unregister_component(&pdev->dev);
-
- s6000_i2s_stop_channel(dev, 0);
- s6000_i2s_stop_channel(dev, 1);
-
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
- kfree(dev);
-
- region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- release_mem_region(region->start, resource_size(region));
-
- region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (region)
- release_mem_region(region->start, resource_size(region));
-
- region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(region->start, resource_size(region));
-
- iounmap(mmio);
- region = platform_get_resource(pdev, IORESOURCE_IO, 0);
- release_mem_region(region->start, resource_size(region));
-
- return 0;
-}
-
-static struct platform_driver s6000_i2s_driver = {
- .probe = s6000_i2s_probe,
- .remove = s6000_i2s_remove,
- .driver = {
- .name = "s6000-i2s",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(s6000_i2s_driver);
-
-MODULE_AUTHOR("Daniel Gloeckner");
-MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * ALSA SoC I2S Audio Layer for the Stretch s6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _S6000_I2S_H
-#define _S6000_I2S_H
-
-struct s6000_snd_platform_data {
- int lines_in;
- int lines_out;
- int channel_in;
- int channel_out;
- int wide;
- int same_rate;
-};
-#endif
+++ /dev/null
-/*
- * ALSA PCM interface for the Stetch s6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/dma.h>
-#include <variant/dmac.h>
-
-#include "s6000-pcm.h"
-
-#define S6_PCM_PREALLOCATE_SIZE (96 * 1024)
-#define S6_PCM_PREALLOCATE_MAX (2048 * 1024)
-
-static struct snd_pcm_hardware s6000_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_JOINT_DUPLEX),
- .buffer_bytes_max = 0x7ffffff0,
- .period_bytes_min = 16,
- .period_bytes_max = 0xfffff0,
- .periods_min = 2,
- .periods_max = 1024, /* no limit */
- .fifo_size = 0,
-};
-
-struct s6000_runtime_data {
- spinlock_t lock;
- int period; /* current DMA period */
-};
-
-static void s6000_pcm_enqueue_dma(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd = runtime->private_data;
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- int channel;
- unsigned int period_size;
- unsigned int dma_offset;
- dma_addr_t dma_pos;
- dma_addr_t src, dst;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- period_size = snd_pcm_lib_period_bytes(substream);
- dma_offset = prtd->period * period_size;
- dma_pos = runtime->dma_addr + dma_offset;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- src = dma_pos;
- dst = par->sif_out;
- channel = par->dma_out;
- } else {
- src = par->sif_in;
- dst = dma_pos;
- channel = par->dma_in;
- }
-
- if (!s6dmac_channel_enabled(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel)))
- return;
-
- if (s6dmac_fifo_full(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel))) {
- printk(KERN_ERR "s6000-pcm: fifo full\n");
- return;
- }
-
- if (WARN_ON(period_size & 15))
- return;
- s6dmac_put_fifo(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel),
- src, dst, period_size);
-
- prtd->period++;
- if (unlikely(prtd->period >= runtime->periods))
- prtd->period = 0;
-}
-
-static irqreturn_t s6000_pcm_irq(int irq, void *data)
-{
- struct snd_pcm *pcm = data;
- struct snd_soc_pcm_runtime *runtime = pcm->private_data;
- struct s6000_runtime_data *prtd;
- unsigned int has_xrun;
- int i, ret = IRQ_NONE;
-
- for (i = 0; i < 2; ++i) {
- struct snd_pcm_substream *substream = pcm->streams[i].substream;
- struct s6000_pcm_dma_params *params =
- snd_soc_dai_get_dma_data(runtime->cpu_dai, substream);
- u32 channel;
- unsigned int pending;
-
- if (substream == SNDRV_PCM_STREAM_PLAYBACK)
- channel = params->dma_out;
- else
- channel = params->dma_in;
-
- has_xrun = params->check_xrun(runtime->cpu_dai);
-
- if (!channel)
- continue;
-
- if (unlikely(has_xrun & (1 << i)) &&
- substream->runtime &&
- snd_pcm_running(substream)) {
- dev_dbg(pcm->dev, "xrun\n");
- snd_pcm_stream_lock(substream);
- snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
- snd_pcm_stream_unlock(substream);
- ret = IRQ_HANDLED;
- }
-
- pending = s6dmac_int_sources(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel));
-
- if (pending & 1) {
- ret = IRQ_HANDLED;
- if (likely(substream->runtime &&
- snd_pcm_running(substream))) {
- snd_pcm_period_elapsed(substream);
- dev_dbg(pcm->dev, "period elapsed %x %x\n",
- s6dmac_cur_src(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel)),
- s6dmac_cur_dst(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel)));
- prtd = substream->runtime->private_data;
- spin_lock(&prtd->lock);
- s6000_pcm_enqueue_dma(substream);
- spin_unlock(&prtd->lock);
- }
- }
-
- if (unlikely(pending & ~7)) {
- if (pending & (1 << 3))
- printk(KERN_WARNING
- "s6000-pcm: DMA %x Underflow\n",
- channel);
- if (pending & (1 << 4))
- printk(KERN_WARNING
- "s6000-pcm: DMA %x Overflow\n",
- channel);
- if (pending & 0x1e0)
- printk(KERN_WARNING
- "s6000-pcm: DMA %x Master Error "
- "(mask %x)\n",
- channel, pending >> 5);
-
- }
- }
-
- return ret;
-}
-
-static int s6000_pcm_start(struct snd_pcm_substream *substream)
-{
- struct s6000_runtime_data *prtd = substream->runtime->private_data;
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- unsigned long flags;
- int srcinc;
- u32 dma;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- spin_lock_irqsave(&prtd->lock, flags);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- srcinc = 1;
- dma = par->dma_out;
- } else {
- srcinc = 0;
- dma = par->dma_in;
- }
- s6dmac_enable_chan(DMA_MASK_DMAC(dma), DMA_INDEX_CHNL(dma),
- 1 /* priority 1 (0 is max) */,
- 0 /* peripheral requests w/o xfer length mode */,
- srcinc /* source address increment */,
- srcinc^1 /* destination address increment */,
- 0 /* chunksize 0 (skip impossible on this dma) */,
- 0 /* source skip after chunk (impossible) */,
- 0 /* destination skip after chunk (impossible) */,
- 4 /* 16 byte burst size */,
- -1 /* don't conserve bandwidth */,
- 0 /* low watermark irq descriptor threshold */,
- 0 /* disable hardware timestamps */,
- 1 /* enable channel */);
-
- s6000_pcm_enqueue_dma(substream);
- s6000_pcm_enqueue_dma(substream);
-
- spin_unlock_irqrestore(&prtd->lock, flags);
-
- return 0;
-}
-
-static int s6000_pcm_stop(struct snd_pcm_substream *substream)
-{
- struct s6000_runtime_data *prtd = substream->runtime->private_data;
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- unsigned long flags;
- u32 channel;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- channel = par->dma_out;
- else
- channel = par->dma_in;
-
- s6dmac_set_terminal_count(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel), 0);
-
- spin_lock_irqsave(&prtd->lock, flags);
-
- s6dmac_disable_chan(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel));
-
- spin_unlock_irqrestore(&prtd->lock, flags);
-
- return 0;
-}
-
-static int s6000_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- int ret;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- ret = par->trigger(substream, cmd, 0);
- if (ret < 0)
- return ret;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- ret = s6000_pcm_start(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- ret = s6000_pcm_stop(substream);
- break;
- default:
- ret = -EINVAL;
- }
- if (ret < 0)
- return ret;
-
- return par->trigger(substream, cmd, 1);
-}
-
-static int s6000_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct s6000_runtime_data *prtd = substream->runtime->private_data;
-
- prtd->period = 0;
-
- return 0;
-}
-
-static snd_pcm_uframes_t s6000_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd = runtime->private_data;
- unsigned long flags;
- unsigned int offset;
- dma_addr_t count;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- spin_lock_irqsave(&prtd->lock, flags);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- count = s6dmac_cur_src(DMA_MASK_DMAC(par->dma_out),
- DMA_INDEX_CHNL(par->dma_out));
- else
- count = s6dmac_cur_dst(DMA_MASK_DMAC(par->dma_in),
- DMA_INDEX_CHNL(par->dma_in));
-
- count -= runtime->dma_addr;
-
- spin_unlock_irqrestore(&prtd->lock, flags);
-
- offset = bytes_to_frames(runtime, count);
- if (unlikely(offset >= runtime->buffer_size))
- offset = 0;
-
- return offset;
-}
-
-static int s6000_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd;
- int ret;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
- snd_soc_set_runtime_hwparams(substream, &s6000_pcm_hardware);
-
- ret = snd_pcm_hw_constraint_step(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16);
- if (ret < 0)
- return ret;
- ret = snd_pcm_hw_constraint_step(runtime, 0,
- SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16);
- if (ret < 0)
- return ret;
- ret = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- return ret;
-
- if (par->same_rate) {
- int rate;
- spin_lock(&par->lock); /* needed? */
- rate = par->rate;
- spin_unlock(&par->lock);
- if (rate != -1) {
- ret = snd_pcm_hw_constraint_minmax(runtime,
- SNDRV_PCM_HW_PARAM_RATE,
- rate, rate);
- if (ret < 0)
- return ret;
- }
- }
-
- prtd = kzalloc(sizeof(struct s6000_runtime_data), GFP_KERNEL);
- if (prtd == NULL)
- return -ENOMEM;
-
- spin_lock_init(&prtd->lock);
-
- runtime->private_data = prtd;
-
- return 0;
-}
-
-static int s6000_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd = runtime->private_data;
-
- kfree(prtd);
-
- return 0;
-}
-
-static int s6000_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- int ret;
- ret = snd_pcm_lib_malloc_pages(substream,
- params_buffer_bytes(hw_params));
- if (ret < 0) {
- printk(KERN_WARNING "s6000-pcm: allocation of memory failed\n");
- return ret;
- }
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- if (par->same_rate) {
- spin_lock(&par->lock);
- if (par->rate == -1 ||
- !(par->in_use & ~(1 << substream->stream))) {
- par->rate = params_rate(hw_params);
- par->in_use |= 1 << substream->stream;
- } else if (params_rate(hw_params) != par->rate) {
- snd_pcm_lib_free_pages(substream);
- par->in_use &= ~(1 << substream->stream);
- ret = -EBUSY;
- }
- spin_unlock(&par->lock);
- }
- return ret;
-}
-
-static int s6000_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par =
- snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- spin_lock(&par->lock);
- par->in_use &= ~(1 << substream->stream);
- if (!par->in_use)
- par->rate = -1;
- spin_unlock(&par->lock);
-
- return snd_pcm_lib_free_pages(substream);
-}
-
-static struct snd_pcm_ops s6000_pcm_ops = {
- .open = s6000_pcm_open,
- .close = s6000_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = s6000_pcm_hw_params,
- .hw_free = s6000_pcm_hw_free,
- .trigger = s6000_pcm_trigger,
- .prepare = s6000_pcm_prepare,
- .pointer = s6000_pcm_pointer,
-};
-
-static void s6000_pcm_free(struct snd_pcm *pcm)
-{
- struct snd_soc_pcm_runtime *runtime = pcm->private_data;
- struct s6000_pcm_dma_params *params =
- snd_soc_dai_get_dma_data(runtime->cpu_dai,
- pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream);
-
- free_irq(params->irq, pcm);
- snd_pcm_lib_preallocate_free_for_all(pcm);
-}
-
-static int s6000_pcm_new(struct snd_soc_pcm_runtime *runtime)
-{
- struct snd_card *card = runtime->card->snd_card;
- struct snd_pcm *pcm = runtime->pcm;
- struct s6000_pcm_dma_params *params;
- int res;
-
- params = snd_soc_dai_get_dma_data(runtime->cpu_dai,
- pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream);
-
- res = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
- if (res)
- return res;
-
- if (params->dma_in) {
- s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in),
- DMA_INDEX_CHNL(params->dma_in));
- s6dmac_int_sources(DMA_MASK_DMAC(params->dma_in),
- DMA_INDEX_CHNL(params->dma_in));
- }
-
- if (params->dma_out) {
- s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_out),
- DMA_INDEX_CHNL(params->dma_out));
- s6dmac_int_sources(DMA_MASK_DMAC(params->dma_out),
- DMA_INDEX_CHNL(params->dma_out));
- }
-
- res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
- "s6000-audio", pcm);
- if (res) {
- printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
- return res;
- }
-
- res = snd_pcm_lib_preallocate_pages_for_all(pcm,
- SNDRV_DMA_TYPE_DEV,
- card->dev,
- S6_PCM_PREALLOCATE_SIZE,
- S6_PCM_PREALLOCATE_MAX);
- if (res)
- printk(KERN_WARNING "s6000-pcm: preallocation failed\n");
-
- spin_lock_init(¶ms->lock);
- params->in_use = 0;
- params->rate = -1;
- return 0;
-}
-
-static struct snd_soc_platform_driver s6000_soc_platform = {
- .ops = &s6000_pcm_ops,
- .pcm_new = s6000_pcm_new,
- .pcm_free = s6000_pcm_free,
-};
-
-static int s6000_soc_platform_probe(struct platform_device *pdev)
-{
- return snd_soc_register_platform(&pdev->dev, &s6000_soc_platform);
-}
-
-static int s6000_soc_platform_remove(struct platform_device *pdev)
-{
- snd_soc_unregister_platform(&pdev->dev);
- return 0;
-}
-
-static struct platform_driver s6000_pcm_driver = {
- .driver = {
- .name = "s6000-pcm-audio",
- .owner = THIS_MODULE,
- },
-
- .probe = s6000_soc_platform_probe,
- .remove = s6000_soc_platform_remove,
-};
-
-module_platform_driver(s6000_pcm_driver);
-
-MODULE_AUTHOR("Daniel Gloeckner");
-MODULE_DESCRIPTION("Stretch s6000 family PCM DMA module");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * ALSA PCM interface for the Stretch s6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _S6000_PCM_H
-#define _S6000_PCM_H
-
-struct snd_soc_dai;
-struct snd_pcm_substream;
-
-struct s6000_pcm_dma_params {
- unsigned int (*check_xrun)(struct snd_soc_dai *cpu_dai);
- int (*trigger)(struct snd_pcm_substream *substream, int cmd, int after);
- dma_addr_t sif_in;
- dma_addr_t sif_out;
- u32 dma_in;
- u32 dma_out;
- int irq;
- int same_rate;
-
- spinlock_t lock;
- int in_use;
- int rate;
-};
-
-#endif
+++ /dev/null
-/*
- * ASoC driver for Stretch s6105 IP camera platform
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#include "s6000-pcm.h"
-#include "s6000-i2s.h"
-
-#define S6105_CAM_CODEC_CLOCK 12288000
-
-static int s6105_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- int ret = 0;
-
- /* set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
-
- /* set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM |
- SND_SOC_DAIFMT_NB_NF);
- if (ret < 0)
- return ret;
-
- /* set the codec system clock */
- ret = snd_soc_dai_set_sysclk(codec_dai, 0, S6105_CAM_CODEC_CLOCK,
- SND_SOC_CLOCK_OUT);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static struct snd_soc_ops s6105_ops = {
- .hw_params = s6105_hw_params,
-};
-
-/* s6105 machine dapm widgets */
-static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
- SND_SOC_DAPM_LINE("Audio Out Differential", NULL),
- SND_SOC_DAPM_LINE("Audio Out Stereo", NULL),
- SND_SOC_DAPM_LINE("Audio In", NULL),
-};
-
-/* s6105 machine audio_mapnections to the codec pins */
-static const struct snd_soc_dapm_route audio_map[] = {
- /* Audio Out connected to HPLOUT, HPLCOM, HPROUT */
- {"Audio Out Differential", NULL, "HPLOUT"},
- {"Audio Out Differential", NULL, "HPLCOM"},
- {"Audio Out Stereo", NULL, "HPLOUT"},
- {"Audio Out Stereo", NULL, "HPROUT"},
-
- /* Audio In connected to LINE1L, LINE1R */
- {"LINE1L", NULL, "Audio In"},
- {"LINE1R", NULL, "Audio In"},
-};
-
-static int output_type_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
- uinfo->count = 1;
- uinfo->value.enumerated.items = 2;
- if (uinfo->value.enumerated.item) {
- uinfo->value.enumerated.item = 1;
- strcpy(uinfo->value.enumerated.name, "HPLOUT/HPROUT");
- } else {
- strcpy(uinfo->value.enumerated.name, "HPLOUT/HPLCOM");
- }
- return 0;
-}
-
-static int output_type_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.enumerated.item[0] = kcontrol->private_value;
- return 0;
-}
-
-static int output_type_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_card *card = kcontrol->private_data;
- struct snd_soc_dapm_context *dapm = &card->dapm;
- unsigned int val = (ucontrol->value.enumerated.item[0] != 0);
- char *differential = "Audio Out Differential";
- char *stereo = "Audio Out Stereo";
-
- if (kcontrol->private_value == val)
- return 0;
- kcontrol->private_value = val;
- snd_soc_dapm_disable_pin(dapm, val ? differential : stereo);
- snd_soc_dapm_sync(dapm);
- snd_soc_dapm_enable_pin(dapm, val ? stereo : differential);
- snd_soc_dapm_sync(dapm);
-
- return 1;
-}
-
-static const struct snd_kcontrol_new audio_out_mux = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Output Mux",
- .index = 0,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
- .info = output_type_info,
- .get = output_type_get,
- .put = output_type_put,
- .private_value = 1 /* default to stereo */
-};
-
-/* Logic for a aic3x as connected on the s6105 ip camera ref design */
-static int s6105_aic3x_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_card *card = rtd->card;
-
- /* must correspond to audio_out_mux.private_value initializer */
- snd_soc_dapm_disable_pin(&card->dapm, "Audio Out Differential");
-
- snd_ctl_add(card->snd_card, snd_ctl_new1(&audio_out_mux, card));
-
- return 0;
-}
-
-/* s6105 digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link s6105_dai = {
- .name = "TLV320AIC31",
- .stream_name = "AIC31",
- .cpu_dai_name = "s6000-i2s",
- .codec_dai_name = "tlv320aic3x-hifi",
- .platform_name = "s6000-pcm-audio",
- .codec_name = "tlv320aic3x-codec.0-001a",
- .init = s6105_aic3x_init,
- .ops = &s6105_ops,
-};
-
-/* s6105 audio machine driver */
-static struct snd_soc_card snd_soc_card_s6105 = {
- .name = "Stretch IP Camera",
- .owner = THIS_MODULE,
- .dai_link = &s6105_dai,
- .num_links = 1,
-
- .dapm_widgets = aic3x_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(aic3x_dapm_widgets),
- .dapm_routes = audio_map,
- .num_dapm_routes = ARRAY_SIZE(audio_map),
- .fully_routed = true,
-};
-
-static struct s6000_snd_platform_data s6105_snd_data __initdata = {
- .wide = 0,
- .channel_in = 0,
- .channel_out = 1,
- .lines_in = 1,
- .lines_out = 1,
- .same_rate = 1,
-};
-
-static struct platform_device *s6105_snd_device;
-
-/* temporary i2c device creation until this can be moved into the machine
- * support file.
-*/
-static struct i2c_board_info i2c_device[] = {
- { I2C_BOARD_INFO("tlv320aic33", 0x18), }
-};
-
-static int __init s6105_init(void)
-{
- int ret;
-
- i2c_register_board_info(0, i2c_device, ARRAY_SIZE(i2c_device));
-
- s6105_snd_device = platform_device_alloc("soc-audio", -1);
- if (!s6105_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(s6105_snd_device, &snd_soc_card_s6105);
- platform_device_add_data(s6105_snd_device, &s6105_snd_data,
- sizeof(s6105_snd_data));
-
- ret = platform_device_add(s6105_snd_device);
- if (ret)
- platform_device_put(s6105_snd_device);
-
- return ret;
-}
-
-static void __exit s6105_exit(void)
-{
- platform_device_unregister(s6105_snd_device);
-}
-
-module_init(s6105_init);
-module_exit(s6105_exit);
-
-MODULE_AUTHOR("Daniel Gloeckner");
-MODULE_DESCRIPTION("Stretch s6105 IP camera ASoC driver");
-MODULE_LICENSE("GPL");
{
struct snd_card *card;
struct list_head *p;
+ bool was_shutdown;
if (chip == (void *)-1L)
return;
card = chip->card;
down_write(&chip->shutdown_rwsem);
+ was_shutdown = chip->shutdown;
chip->shutdown = 1;
up_write(&chip->shutdown_rwsem);
mutex_lock(®ister_mutex);
- chip->num_interfaces--;
- if (chip->num_interfaces <= 0) {
+ if (!was_shutdown) {
struct snd_usb_endpoint *ep;
snd_card_disconnect(card);
list_for_each(p, &chip->mixer_list) {
snd_usb_mixer_disconnect(p);
}
+ }
+
+ chip->num_interfaces--;
+ if (chip->num_interfaces <= 0) {
usb_chip[chip->index] = NULL;
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
return changed;
}
+static void kctl_private_value_free(struct snd_kcontrol *kctl)
+{
+ kfree((void *)kctl->private_value);
+}
+
static int snd_ftu_create_effect_switch(struct usb_mixer_interface *mixer,
int validx, int bUnitID)
{
return -ENOMEM;
}
+ kctl->private_free = kctl_private_value_free;
err = snd_ctl_add(mixer->chip->card, kctl);
if (err < 0)
return err;
int cmd_diff(int argc, const char **argv, const char *prefix __maybe_unused)
{
+ int ret = hists__init();
+
+ if (ret < 0)
+ return ret;
+
perf_config(perf_default_config, NULL);
argc = parse_options(argc, argv, options, diff_usage, 0);
OPT_CALLBACK('x', "exec", NULL, "executable|path",
"target executable name or path", opt_set_target),
OPT_BOOLEAN(0, "demangle", &symbol_conf.demangle,
- "Disable symbol demangling"),
+ "Enable symbol demangling"),
OPT_BOOLEAN(0, "demangle-kernel", &symbol_conf.demangle_kernel,
"Enable kernel symbol demangling"),
OPT_END()
#define wmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
#define rmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
#define cpu_relax() asm volatile("rep; nop" ::: "memory");
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#ifndef __NR_perf_event_open
# define __NR_perf_event_open 336
#endif
#define wmb() asm volatile("sfence" ::: "memory")
#define rmb() asm volatile("lfence" ::: "memory")
#define cpu_relax() asm volatile("rep; nop" ::: "memory");
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#ifndef __NR_perf_event_open
# define __NR_perf_event_open 298
#endif
#define mb() asm volatile ("sync" ::: "memory")
#define wmb() asm volatile ("sync" ::: "memory")
#define rmb() asm volatile ("sync" ::: "memory")
-#define CPUINFO_PROC "cpu"
+#define CPUINFO_PROC {"cpu"}
#endif
#ifdef __s390__
#define mb() asm volatile("bcr 15,0" ::: "memory")
#define wmb() asm volatile("bcr 15,0" ::: "memory")
#define rmb() asm volatile("bcr 15,0" ::: "memory")
-#define CPUINFO_PROC "vendor_id"
+#define CPUINFO_PROC {"vendor_id"}
#endif
#ifdef __sh__
# define wmb() asm volatile("" ::: "memory")
# define rmb() asm volatile("" ::: "memory")
#endif
-#define CPUINFO_PROC "cpu type"
+#define CPUINFO_PROC {"cpu type"}
#endif
#ifdef __hppa__
#define mb() asm volatile("" ::: "memory")
#define wmb() asm volatile("" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "cpu"
+#define CPUINFO_PROC {"cpu"}
#endif
#ifdef __sparc__
#endif
#define wmb() asm volatile("":::"memory")
#define rmb() asm volatile("":::"memory")
-#define CPUINFO_PROC "cpu"
+#define CPUINFO_PROC {"cpu"}
#endif
#ifdef __alpha__
#define mb() asm volatile("mb" ::: "memory")
#define wmb() asm volatile("wmb" ::: "memory")
#define rmb() asm volatile("mb" ::: "memory")
-#define CPUINFO_PROC "cpu model"
+#define CPUINFO_PROC {"cpu model"}
#endif
#ifdef __ia64__
#define wmb() asm volatile ("mf" ::: "memory")
#define rmb() asm volatile ("mf" ::: "memory")
#define cpu_relax() asm volatile ("hint @pause" ::: "memory")
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#endif
#ifdef __arm__
#define mb() ((void(*)(void))0xffff0fa0)()
#define wmb() ((void(*)(void))0xffff0fa0)()
#define rmb() ((void(*)(void))0xffff0fa0)()
-#define CPUINFO_PROC "Processor"
+#define CPUINFO_PROC {"model name", "Processor"}
#endif
#ifdef __aarch64__
: "memory")
#define wmb() mb()
#define rmb() mb()
-#define CPUINFO_PROC "cpu model"
+#define CPUINFO_PROC {"cpu model"}
#endif
#ifdef __arc__
#define mb() asm volatile("" ::: "memory")
#define wmb() asm volatile("" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "Processor"
+#define CPUINFO_PROC {"Processor"}
#endif
#ifdef __metag__
#define mb() asm volatile("" ::: "memory")
#define wmb() asm volatile("" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "CPU"
+#define CPUINFO_PROC {"CPU"}
#endif
#ifdef __xtensa__
#define mb() asm volatile("memw" ::: "memory")
#define wmb() asm volatile("memw" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "core ID"
+#define CPUINFO_PROC {"core ID"}
#endif
#ifdef __tile__
#define wmb() asm volatile ("mf" ::: "memory")
#define rmb() asm volatile ("mf" ::: "memory")
#define cpu_relax() asm volatile ("mfspr zero, PASS" ::: "memory")
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#endif
#define barrier() asm volatile ("" ::: "memory")
return do_write_string(fd, perf_version_string);
}
-static int write_cpudesc(int fd, struct perf_header *h __maybe_unused,
- struct perf_evlist *evlist __maybe_unused)
+static int __write_cpudesc(int fd, const char *cpuinfo_proc)
{
-#ifndef CPUINFO_PROC
-#define CPUINFO_PROC NULL
-#endif
FILE *file;
char *buf = NULL;
char *s, *p;
- const char *search = CPUINFO_PROC;
+ const char *search = cpuinfo_proc;
size_t len = 0;
int ret = -1;
return ret;
}
+static int write_cpudesc(int fd, struct perf_header *h __maybe_unused,
+ struct perf_evlist *evlist __maybe_unused)
+{
+#ifndef CPUINFO_PROC
+#define CPUINFO_PROC {"model name", }
+#endif
+ const char *cpuinfo_procs[] = CPUINFO_PROC;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(cpuinfo_procs); i++) {
+ int ret;
+ ret = __write_cpudesc(fd, cpuinfo_procs[i]);
+ if (ret >= 0)
+ return ret;
+ }
+ return -1;
+}
+
+
static int write_nrcpus(int fd, struct perf_header *h __maybe_unused,
struct perf_evlist *evlist __maybe_unused)
{
static int64_t
sort__dso_from_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return _sort__dso_cmp(left->branch_info->from.map,
right->branch_info->from.map);
}
static int hist_entry__dso_from_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- return _hist_entry__dso_snprintf(he->branch_info->from.map,
- bf, size, width);
+ if (he->branch_info)
+ return _hist_entry__dso_snprintf(he->branch_info->from.map,
+ bf, size, width);
+ else
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int64_t
sort__dso_to_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return _sort__dso_cmp(left->branch_info->to.map,
right->branch_info->to.map);
}
static int hist_entry__dso_to_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- return _hist_entry__dso_snprintf(he->branch_info->to.map,
- bf, size, width);
+ if (he->branch_info)
+ return _hist_entry__dso_snprintf(he->branch_info->to.map,
+ bf, size, width);
+ else
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int64_t
struct addr_map_symbol *from_l = &left->branch_info->from;
struct addr_map_symbol *from_r = &right->branch_info->from;
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
+ from_l = &left->branch_info->from;
+ from_r = &right->branch_info->from;
+
if (!from_l->sym && !from_r->sym)
return _sort__addr_cmp(from_l->addr, from_r->addr);
static int64_t
sort__sym_to_cmp(struct hist_entry *left, struct hist_entry *right)
{
- struct addr_map_symbol *to_l = &left->branch_info->to;
- struct addr_map_symbol *to_r = &right->branch_info->to;
+ struct addr_map_symbol *to_l, *to_r;
+
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
+ to_l = &left->branch_info->to;
+ to_r = &right->branch_info->to;
if (!to_l->sym && !to_r->sym)
return _sort__addr_cmp(to_l->addr, to_r->addr);
static int hist_entry__sym_from_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- struct addr_map_symbol *from = &he->branch_info->from;
- return _hist_entry__sym_snprintf(from->map, from->sym, from->addr,
- he->level, bf, size, width);
+ if (he->branch_info) {
+ struct addr_map_symbol *from = &he->branch_info->from;
+ return _hist_entry__sym_snprintf(from->map, from->sym, from->addr,
+ he->level, bf, size, width);
+ }
+
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int hist_entry__sym_to_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- struct addr_map_symbol *to = &he->branch_info->to;
- return _hist_entry__sym_snprintf(to->map, to->sym, to->addr,
- he->level, bf, size, width);
+ if (he->branch_info) {
+ struct addr_map_symbol *to = &he->branch_info->to;
+ return _hist_entry__sym_snprintf(to->map, to->sym, to->addr,
+ he->level, bf, size, width);
+ }
+
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
struct sort_entry sort_dso_from = {
static int64_t
sort__mispredict_cmp(struct hist_entry *left, struct hist_entry *right)
{
- const unsigned char mp = left->branch_info->flags.mispred !=
- right->branch_info->flags.mispred;
- const unsigned char p = left->branch_info->flags.predicted !=
- right->branch_info->flags.predicted;
+ unsigned char mp, p;
+
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+ mp = left->branch_info->flags.mispred != right->branch_info->flags.mispred;
+ p = left->branch_info->flags.predicted != right->branch_info->flags.predicted;
return mp || p;
}
size_t size, unsigned int width){
static const char *out = "N/A";
- if (he->branch_info->flags.predicted)
- out = "N";
- else if (he->branch_info->flags.mispred)
- out = "Y";
+ if (he->branch_info) {
+ if (he->branch_info->flags.predicted)
+ out = "N";
+ else if (he->branch_info->flags.mispred)
+ out = "Y";
+ }
return repsep_snprintf(bf, size, "%-*.*s", width, width, out);
}
static int64_t
sort__abort_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return left->branch_info->flags.abort !=
right->branch_info->flags.abort;
}
static int hist_entry__abort_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- static const char *out = ".";
+ static const char *out = "N/A";
+
+ if (he->branch_info) {
+ if (he->branch_info->flags.abort)
+ out = "A";
+ else
+ out = ".";
+ }
- if (he->branch_info->flags.abort)
- out = "A";
return repsep_snprintf(bf, size, "%-*s", width, out);
}
static int64_t
sort__in_tx_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return left->branch_info->flags.in_tx !=
right->branch_info->flags.in_tx;
}
static int hist_entry__in_tx_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- static const char *out = ".";
+ static const char *out = "N/A";
- if (he->branch_info->flags.in_tx)
- out = "T";
+ if (he->branch_info) {
+ if (he->branch_info->flags.in_tx)
+ out = "T";
+ else
+ out = ".";
+ }
return repsep_snprintf(bf, size, "%-*s", width, out);
}
if (!new)
return -ENOMEM;
list_add(&new->list, &thread->comm_list);
+
+ if (exec)
+ unwind__flush_access(thread);
}
thread->comm_set = true;
return -ENOMEM;
}
+ unw_set_caching_policy(addr_space, UNW_CACHE_GLOBAL);
thread__set_priv(thread, addr_space);
return 0;
}
+void unwind__flush_access(struct thread *thread)
+{
+ unw_addr_space_t addr_space;
+
+ if (callchain_param.record_mode != CALLCHAIN_DWARF)
+ return;
+
+ addr_space = thread__priv(thread);
+ unw_flush_cache(addr_space, 0, 0);
+}
+
void unwind__finish_access(struct thread *thread)
{
unw_addr_space_t addr_space;
#ifdef HAVE_LIBUNWIND_SUPPORT
int libunwind__arch_reg_id(int regnum);
int unwind__prepare_access(struct thread *thread);
+void unwind__flush_access(struct thread *thread);
void unwind__finish_access(struct thread *thread);
#else
static inline int unwind__prepare_access(struct thread *thread __maybe_unused)
return 0;
}
+static inline void unwind__flush_access(struct thread *thread __maybe_unused) {}
static inline void unwind__finish_access(struct thread *thread __maybe_unused) {}
#endif
#else
return 0;
}
+static inline void unwind__flush_access(struct thread *thread __maybe_unused) {}
static inline void unwind__finish_access(struct thread *thread __maybe_unused) {}
#endif /* HAVE_DWARF_UNWIND_SUPPORT */
#endif /* __UNWIND_H */
}
# Parameters
-DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' '`
+DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' ' | head -1`
TRACING_DIR=$DEBUGFS_DIR/tracing
TOP_DIR=`absdir $0`
TEST_DIR=$TOP_DIR/test.d
projects / mirror_ubuntu-artful-kernel.git / commitdiff