serial: update LSR on enabling/disabling FIFOs

When the transmit FIFO is emptied or enabled, the transmitter
hold register is empty.  When it is disabled, it is also emptied and
in addition the previous contents of the transmitter hold register
are discarded.  In either case, the THRE bit in LSR must be set and
THRI raised.

When the receive FIFO is emptied or enabled, the data ready and break
bits must be cleared in LSR.  Likewise when the receive FIFO is disabled.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

diff --git a/hw/char/serial.c b/hw/char/serial.c
index 9adb12667dce1e500cef529710232cc49e0c498c..76054a542a01c6fbaf210726fda457532a7cf408 100644 (file)
--- a/hw/char/serial.c
+++ b/hw/char/serial.c
@@ -377,12 +377,15 @@ static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val,
         /* FIFO clear */
 
         if (val & UART_FCR_RFR) {
+            s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
             timer_del(s->fifo_timeout_timer);
             s->timeout_ipending = 0;
             fifo8_reset(&s->recv_fifo);
         }
 
         if (val & UART_FCR_XFR) {
+            s->lsr |= UART_LSR_THRE;
+            s->thr_ipending = 1;
             fifo8_reset(&s->xmit_fifo);
         }