Remove no longer needed samsung thermal properties.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <23>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_mux_addr = <6>;
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
<&cmu_peris CLK_SCLK_TMU0>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
<&cmu_peris CLK_SCLK_TMU0>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
<&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
<&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
<&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos7 TMU sensor configuration
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <9>;
-samsung,tmu_reference_voltage = <17>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <15>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
clocks = <&clock_peris PCLK_TMU>,
<&clock_peris SCLK_TMU>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos7-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};
thermal-zones {