device_remove_file(&efx->pci_dev->dev, &dev_attr_mcdi_logging);
}
#endif
- enum pci_channel_state state)
+
+/* A PCI error affecting this device was detected.
+ * At this point MMIO and DMA may be disabled.
+ * Stop the software path and request a slot reset.
+ */
+static pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev,
++ pci_channel_state_t state)
+{
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ rtnl_lock();
+
+ if (efx->state != STATE_DISABLED) {
+ efx->state = STATE_RECOVERY;
+ efx->reset_pending = 0;
+
+ efx_device_detach_sync(efx);
+
+ efx_stop_all(efx);
+ efx_disable_interrupts(efx);
+
+ status = PCI_ERS_RESULT_NEED_RESET;
+ } else {
+ /* If the interface is disabled we don't want to do anything
+ * with it.
+ */
+ status = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ rtnl_unlock();
+
+ pci_disable_device(pdev);
+
+ return status;
+}
+
+/* Fake a successful reset, which will be performed later in efx_io_resume. */
+static pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev)
+{
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+
+ if (pci_enable_device(pdev)) {
+ netif_err(efx, hw, efx->net_dev,
+ "Cannot re-enable PCI device after reset.\n");
+ status = PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return status;
+}
+
+/* Perform the actual reset and resume I/O operations. */
+static void efx_io_resume(struct pci_dev *pdev)
+{
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+ int rc;
+
+ rtnl_lock();
+
+ if (efx->state == STATE_DISABLED)
+ goto out;
+
+ rc = efx_reset(efx, RESET_TYPE_ALL);
+ if (rc) {
+ netif_err(efx, hw, efx->net_dev,
+ "efx_reset failed after PCI error (%d)\n", rc);
+ } else {
+ efx->state = STATE_READY;
+ netif_dbg(efx, hw, efx->net_dev,
+ "Done resetting and resuming IO after PCI error.\n");
+ }
+
+out:
+ rtnl_unlock();
+}
+
+/* For simplicity and reliability, we always require a slot reset and try to
+ * reset the hardware when a pci error affecting the device is detected.
+ * We leave both the link_reset and mmio_enabled callback unimplemented:
+ * with our request for slot reset the mmio_enabled callback will never be
+ * called, and the link_reset callback is not used by AER or EEH mechanisms.
+ */
+const struct pci_error_handlers efx_err_handlers = {
+ .error_detected = efx_io_error_detected,
+ .slot_reset = efx_io_slot_reset,
+ .resume = efx_io_resume,
+};
+
+int efx_get_phys_port_id(struct net_device *net_dev,
+ struct netdev_phys_item_id *ppid)
+{
+ struct efx_nic *efx = netdev_priv(net_dev);
+
+ if (efx->type->get_phys_port_id)
+ return efx->type->get_phys_port_id(efx, ppid);
+ else
+ return -EOPNOTSUPP;
+}
+
+int efx_get_phys_port_name(struct net_device *net_dev, char *name, size_t len)
+{
+ struct efx_nic *efx = netdev_priv(net_dev);
+
+ if (snprintf(name, len, "p%u", efx->port_num) >= len)
+ return -EINVAL;
+ return 0;
+}