docs: lcd-panel-cgram.txt: convert docs to ReST and rename to *.rst

This small text file describes the usage of parallel port LCD
displays from userspace PoV. So, a good candidate for the
admin guide.

While this is not part of the admin-guide book, mark it as
:orphan:, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

diff --git a/Documentation/auxdisplay/lcd-panel-cgram.rst b/Documentation/auxdisplay/lcd-panel-cgram.rst
new file mode 100644 (file)
index 0000000..dfef502
--- /dev/null
+++ b/Documentation/auxdisplay/lcd-panel-cgram.rst
@@ -0,0 +1,29 @@
+:orphan:
+
+======================================
+Parallel port LCD/Keypad Panel support
+======================================
+
+Some LCDs allow you to define up to 8 characters, mapped to ASCII
+characters 0 to 7. The escape code to define a new character is
+'\e[LG' followed by one digit from 0 to 7, representing the character
+number, and up to 8 couples of hex digits terminated by a semi-colon
+(';'). Each couple of digits represents a line, with 1-bits for each
+illuminated pixel with LSB on the right. Lines are numbered from the
+top of the character to the bottom. On a 5x7 matrix, only the 5 lower
+bits of the 7 first bytes are used for each character. If the string
+is incomplete, only complete lines will be redefined. Here are some
+examples::
+
+  printf "\e[LG0010101050D1F0C04;"  => 0 = [enter]
+  printf "\e[LG1040E1F0000000000;"  => 1 = [up]
+  printf "\e[LG2000000001F0E0400;"  => 2 = [down]
+  printf "\e[LG3040E1F001F0E0400;"  => 3 = [up-down]
+  printf "\e[LG40002060E1E0E0602;"  => 4 = [left]
+  printf "\e[LG500080C0E0F0E0C08;"  => 5 = [right]
+  printf "\e[LG60016051516141400;"  => 6 = "IP"
+
+  printf "\e[LG00103071F1F070301;"  => big speaker
+  printf "\e[LG00002061E1E060200;"  => small speaker
+
+Willy

diff --git a/Documentation/auxdisplay/lcd-panel-cgram.txt b/Documentation/auxdisplay/lcd-panel-cgram.txt
deleted file mode 100644 (file)
index 7f82c90..0000000
--- a/Documentation/auxdisplay/lcd-panel-cgram.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Some LCDs allow you to define up to 8 characters, mapped to ASCII
-characters 0 to 7. The escape code to define a new character is
-'\e[LG' followed by one digit from 0 to 7, representing the character
-number, and up to 8 couples of hex digits terminated by a semi-colon
-(';'). Each couple of digits represents a line, with 1-bits for each
-illuminated pixel with LSB on the right. Lines are numbered from the
-top of the character to the bottom. On a 5x7 matrix, only the 5 lower
-bits of the 7 first bytes are used for each character. If the string
-is incomplete, only complete lines will be redefined. Here are some
-examples :
-
-  printf "\e[LG0010101050D1F0C04;"  => 0 = [enter]
-  printf "\e[LG1040E1F0000000000;"  => 1 = [up]
-  printf "\e[LG2000000001F0E0400;"  => 2 = [down]
-  printf "\e[LG3040E1F001F0E0400;"  => 3 = [up-down]
-  printf "\e[LG40002060E1E0E0602;"  => 4 = [left]
-  printf "\e[LG500080C0E0F0E0C08;"  => 5 = [right]
-  printf "\e[LG60016051516141400;"  => 6 = "IP"
-
-  printf "\e[LG00103071F1F070301;"  => big speaker
-  printf "\e[LG00002061E1E060200;"  => small speaker
-
-Willy
-

diff --git a/MAINTAINERS b/MAINTAINERS
index f5533d1bda2e6813b925e28cc28db79639bb9342..01c83e294f5fc06caed496074dfcdac9f109ab16 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12058,7 +12058,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
 M:     Willy Tarreau <willy@haproxy.com>
 M:     Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
 S:     Odd Fixes
-F:     Documentation/auxdisplay/lcd-panel-cgram.txt
+F:     Documentation/auxdisplay/lcd-panel-cgram.rst
 F:     drivers/auxdisplay/panel.c
 
 PARALLEL PORT SUBSYSTEM