if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
- || MACH_MP1000
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
source "drivers/ide/Kconfig"
endif
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/
-libs-y += arch/arm/lib/
+libs-y := arch/arm/lib/ $(libs-y)
# Default target when executing plain make
ifeq ($(CONFIG_XIP_KERNEL),y)
defined(CONFIG_ARCH_IXP4XX) || \
defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP) || \
- defined(CONFIG_MACH_MP1000)
+ defined(CONFIG_ARCH_OMAP)
.macro loadsp, rb
addruart \rb
.endm
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
# CONFIG_XIP_KERNEL is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Fri Sep 16 15:48:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_MACH_MP1000=y
-CONFIG_MP1000_90MHZ=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=m
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_EDB7312=m
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_MP1000=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_IDE_ARM=y
-CONFIG_BLK_DEV_IDE_MP1000=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_CS89x0=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CLPS711X=y
-CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_WAITQ=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_CLPS711X_UART2 is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Sep 29 14:50:10 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_REALVIEW=y
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# RealView platform type
+#
+CONFIG_MACH_REALVIEW_EB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+# CONFIG_CPU_V6 is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_GIC=y
+CONFIG_ICST307=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ARM_INTEGRATOR=y
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_ARMAACI is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
#include <linux/config.h>
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
+#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
.macro bitop, instr
mov r2, #1
and r3, r0, #7 @ Get bit offset
stmfd sp!, {r2, r4 - r7, lr}
cmp r2, #4
blt .c2u_not_enough
- PLD( pld [r1, #0] )
- PLD( pld [r0, #0] )
ands ip, r0, #3
bne .c2u_dest_not_aligned
.c2u_dest_aligned:
sub r2, r2, ip
subs ip, ip, #32
blt .c2u_0rem8lp
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
- PLD( subs ip, ip, #64 )
- PLD( blt .c2u_0cpynopld )
- PLD( pld [r1, #60] )
- PLD( pld [r0, #60] )
-
-.c2u_0cpy8lp:
- PLD( pld [r1, #92] )
- PLD( pld [r0, #92] )
-.c2u_0cpynopld: ldmia r1!, {r3 - r6}
+
+.c2u_0cpy8lp: ldmia r1!, {r3 - r6}
stmia r0!, {r3 - r6} @ Shouldnt fault
ldmia r1!, {r3 - r6}
subs ip, ip, #32
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_0cpy8lp
- PLD( cmn ip, #64 )
- PLD( bge .c2u_0cpynopld )
- PLD( add ip, ip, #64 )
.c2u_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6}
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_1rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .c2u_1cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-
-.c2u_1cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.c2u_1cpynopld: mov r3, r7, pull #8
+
+.c2u_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #24
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_1cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .c2u_1cpynopld )
- PLD( add ip, ip, #32 )
.c2u_1rem8lp: tst ip, #8
movne r3, r7, pull #8
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_2rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .c2u_2cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-
-.c2u_2cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.c2u_2cpynopld: mov r3, r7, pull #16
+
+.c2u_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_2cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .c2u_2cpynopld )
- PLD( add ip, ip, #32 )
.c2u_2rem8lp: tst ip, #8
movne r3, r7, pull #16
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_3rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .c2u_3cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-
-.c2u_3cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.c2u_3cpynopld: mov r3, r7, pull #24
+
+.c2u_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #8
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_3cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .c2u_3cpynopld )
- PLD( add ip, ip, #32 )
.c2u_3rem8lp: tst ip, #8
movne r3, r7, pull #24
stmfd sp!, {r0, r2, r4 - r7, lr}
cmp r2, #4
blt .cfu_not_enough
- PLD( pld [r1, #0] )
- PLD( pld [r0, #0] )
ands ip, r0, #3
bne .cfu_dest_not_aligned
.cfu_dest_aligned:
sub r2, r2, ip
subs ip, ip, #32
blt .cfu_0rem8lp
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
- PLD( subs ip, ip, #64 )
- PLD( blt .cfu_0cpynopld )
- PLD( pld [r1, #60] )
- PLD( pld [r0, #60] )
-
-.cfu_0cpy8lp:
- PLD( pld [r1, #92] )
- PLD( pld [r0, #92] )
-.cfu_0cpynopld: ldmia r1!, {r3 - r6} @ Shouldnt fault
+
+.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
stmia r0!, {r3 - r6}
ldmia r1!, {r3 - r6} @ Shouldnt fault
subs ip, ip, #32
stmia r0!, {r3 - r6}
bpl .cfu_0cpy8lp
- PLD( cmn ip, #64 )
- PLD( bge .cfu_0cpynopld )
- PLD( add ip, ip, #64 )
.cfu_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6} @ Shouldnt fault
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_1rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .cfu_1cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-
-.cfu_1cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.cfu_1cpynopld: mov r3, r7, pull #8
+
+.cfu_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #24
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bpl .cfu_1cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .cfu_1cpynopld )
- PLD( add ip, ip, #32 )
.cfu_1rem8lp: tst ip, #8
movne r3, r7, pull #8
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_2rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .cfu_2cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-
-.cfu_2cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.cfu_2cpynopld: mov r3, r7, pull #16
+
+.cfu_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bpl .cfu_2cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .cfu_2cpynopld )
- PLD( add ip, ip, #32 )
.cfu_2rem8lp: tst ip, #8
movne r3, r7, pull #16
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_3rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .cfu_3cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-
-.cfu_3cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.cfu_3cpynopld: mov r3, r7, pull #24
+
+.cfu_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7} @ Shouldnt fault
orr r3, r3, r4, push #8
mov r4, r4, pull #24
stmia r0!, {r3 - r6}
subs ip, ip, #16
bpl .cfu_3cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .cfu_3cpynopld )
- PLD( add ip, ip, #32 )
.cfu_3rem8lp: tst ip, #8
movne r3, r7, pull #24
You almost surely want to say N here.
-config MACH_MP1000
- bool "MACH_MP1000"
- help
- Say Y if you intend to run the kernel on the Comdial MP1000 platform.
-
-config MP1000_90MHZ
- bool "MP1000_90MHZ"
- depends on MACH_MP1000
- help
- Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
-
endmenu
endif
obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
-obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
obj-$(CONFIG_LEDS) += $(leds-y)
.virtual = EP7211_VIRT_EXTKBD,
.pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
.length = SZ_1M,
- .type - MT_DEVICE
+ .type = MT_DEVICE,
}, { /* and CS8900A Ethernet chip */
.virtual = EP7211_VIRT_CS8900A,
.pfn = __phys_to_pfn(EP7211_PHYS_CS8900A),
.length = SZ_1M,
- .type = MT_DEVICE
+ .type = MT_DEVICE,
}, { /* flash banks */
.virtual = EP7211_VIRT_FLASH1,
.pfn = __phys_to_pfn(EP7211_PHYS_FLASH1),
.length = SZ_8M,
- .type = MT_DEVICE
+ .type = MT_DEVICE,
}, {
.virtual = EP7211_VIRT_FLASH2,
.pfn = __phys_to_pfn(EP7211_PHYS_FLASH2),
.length = SZ_8M,
- .type = MT_DEVICE
+ .type = MT_DEVICE,
}
};
+++ /dev/null
-/*
- * linux/arch/arm/mach-mp1000/mp1000.c
- *
- * Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/arch/mp1000-seprom.h>
-
-#include "common.h"
-
-extern void mp1000_map_io(void);
-
-static void __init mp1000_init(void)
-{
- seprom_init();
-}
-
-MACHINE_START(MP1000, "Comdial MP1000")
- /* Maintainer: Jon Ringle */
- .phys_ram = 0xc0000000,
- .phys_io = 0x80000000,
- .io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
- .boot_params = 0xc0015100,
- .map_io = mp1000_map_io,
- .init_irq = clps711x_init_irq,
- .init_machine = mp1000_init,
- .timer = &clps711x_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-mp1000/mm.c
- *
- * Extra MM routines for the MP1000
- *
- * Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-extern void clps711x_map_io(void);
-
-static struct map_desc mp1000_io_desc[] __initdata = {
- { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE },
- { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE },
- { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE },
- { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE },
- { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE },
- { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE }
-};
-
-void __init mp1000_map_io(void)
-{
- clps711x_map_io();
- iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
-}
+++ /dev/null
-/*`
- * mp1000-seprom.c
- *
- * This file contains the Serial EEPROM code for the MP1000 board
- *
- * Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/arch/mp1000-seprom.h>
-
-/* If SepromInit() can initialize and checksum the seprom successfully, */
-/* then it will point seprom_data_ptr at the shadow copy. */
-
-static eeprom_struct seprom_data; /* shadow copy of seprom content */
-
-eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */
-
-/*
- * Port D Bit 5 is Chip Select for EEPROM
- * Port E Bit 0 is Input, Data out from EEPROM
- * Port E Bit 1 is Output, Data in to EEPROM
- * Port E Bit 2 is Output, CLK to EEPROM
- */
-
-static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
-static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
-
-#define NO_OF_SHORTS 64 // Device is 64 x 16 bits
-#define ENABLE_RW 0
-#define DISABLE_RW 1
-
-static inline void toggle_seprom_clock(void)
-{
- *port_e_ptr |= HwPortESepromCLK;
- *port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void select_eeprom(void)
-{
- *port_d_ptr |= HwPortDEECS;
- *port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void deselect_eeprom(void)
-{
- *port_d_ptr &= ~(HwPortDEECS);
- *port_e_ptr &= ~(HwPortESepromDIn);
-}
-
-/*
- * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
- * and returns 0 if seprom is not initialized or
- * has a checksum error.
- */
-
-eeprom_struct* get_seprom_ptr(void)
-{
- return seprom_data_ptr;
-}
-
-unsigned char* get_eeprom_mac_address(void)
-{
- return seprom_data_ptr->variant.eprom_struct.mac_Address;
-}
-
-/*
- * ReadSProm, Physically reads data from the Serial PROM
- */
-static void read_sprom(short address, int length, eeprom_struct *buffer)
-{
- short data = COMMAND_READ | (address & 0x3F);
- short bit;
- int i;
-
- select_eeprom();
-
- // Clock in 9 bits of the command
- for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
- if (data & bit)
- *port_e_ptr |= HwPortESepromDIn;
- else
- *port_e_ptr &= ~(HwPortESepromDIn);
-
- toggle_seprom_clock();
- }
-
- //
- // Now read one or more shorts of data from the Seprom
- //
- while (length-- > 0) {
- data = 0;
-
- // Read 16 bits at a time
- for (i = 0; i < 16; i++) {
- data <<= 1;
- toggle_seprom_clock();
- data |= *port_e_ptr & HwPortESepromDOut;
-
- }
-
- buffer->variant.eprom_short_data[address++] = data;
- }
-
- deselect_eeprom();
-
- return;
-}
-
-
-
-/*
- * ReadSerialPROM
- *
- * Input: Pointer to array of 64 x 16 Bits
- *
- * Output: if no problem reading data is filled in
- */
-static void read_serial_prom(eeprom_struct *data)
-{
- read_sprom(0, 64, data);
-}
-
-
-//
-// Compute Serial EEPROM checksum
-//
-// Input: Pointer to struct with Eprom data
-//
-// Output: The computed Eprom checksum
-//
-static short compute_seprom_checksum(eeprom_struct *data)
-{
- short checksum = 0;
- int i;
-
- for (i = 0; i < 126; i++) {
- checksum += (short)data->variant.eprom_byte_data[i];
- }
-
- return((short)(0x5555 - (checksum & 0xFFFF)));
-}
-
-//
-// Make sure the data port bits for the SEPROM are correctly initialised
-//
-
-void __init seprom_init(void)
-{
- short checksum;
-
- // Init Port D
- *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
- *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
-
- // Init Port E
- *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
- *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
-
- //
- // Make sure that EEPROM struct size never exceeds 128 bytes
- //
- if (sizeof(eeprom_struct) > 128) {
- panic("Serial PROM struct size > 128, aborting read\n");
- }
-
- read_serial_prom(&seprom_data);
-
- checksum = compute_seprom_checksum(&seprom_data);
-
- if (checksum != seprom_data.variant.eprom_short_data[63]) {
- panic("Serial EEPROM checksum failed\n");
- }
-
- seprom_data_ptr = &seprom_data;
-}
-
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
}
+/*
+ * Error interrupts. These are used extensively by the microengine drivers
+ */
+static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ int i;
+ unsigned long status = *IXP2000_IRQ_ERR_STATUS;
+
+ for(i = 31; i >= 0; i--) {
+ if(status & (1 << i)) {
+ desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
+ desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs);
+ }
+ }
+}
+
+static void ixp2000_err_irq_mask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
+ (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static void ixp2000_err_irq_unmask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
+ (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static struct irqchip ixp2000_err_irq_chip = {
+ .ack = ixp2000_err_irq_mask,
+ .mask = ixp2000_err_irq_mask,
+ .unmask = ixp2000_err_irq_unmask
+};
+
static struct irqchip ixp2000_pci_irq_chip = {
.ack = ixp2000_pci_irq_mask,
.mask = ixp2000_pci_irq_mask,
} else set_irq_flags(irq, 0);
}
+ for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
+ if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
+ IXP2000_VALID_ERR_IRQ_MASK) {
+ set_irq_chip(irq, &ixp2000_err_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ else
+ set_irq_flags(irq, 0);
+ }
+ set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
+
/*
* GPIO IRQs are invalid until someone sets the interrupt mode
* by calling set_irq_type().
static struct map_desc enp2611_io_desc[] __initdata = {
{
.virtual = ENP2611_CALEB_VIRT_BASE,
- .physical = ENP2611_CALEB_PHYS_BASE,
+ .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
.length = ENP2611_CALEB_SIZE,
- .type = MT_IXP2000_DEVICE
+ .type = MT_IXP2000_DEVICE,
}, {
.virtual = ENP2611_PM3386_0_VIRT_BASE,
- .physical = ENP2611_PM3386_0_PHYS_BASE,
+ .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
.length = ENP2611_PM3386_0_SIZE,
- .type = MT_IXP2000_DEVICE
+ .type = MT_IXP2000_DEVICE,
}, {
.virtual = ENP2611_PM3386_1_VIRT_BASE,
- .physical = ENP2611_PM3386_1_PHYS_BASE,
+ .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
.length = ENP2611_PM3386_1_SIZE,
- .type = MT_IXP2000_DEVICE
+ .type = MT_IXP2000_DEVICE,
}
};
#include <linux/major.h>
#include <linux/fb.h>
#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
#include <asm/hardware/sa1111.h>
.resource = smc91x_resources,
};
+static struct resource flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x04000000,
+ .end = 0x04000000 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition lubbock_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00100000,
+ .offset = 0x00040000,
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00140000
+ }
+};
+
+static struct flash_platform_data lubbock_flash_data[2] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = lubbock_partitions,
+ .nr_parts = ARRAY_SIZE(lubbock_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device lubbock_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lubbock_flash_data[0],
+ },
+ .resource = &flash_resources[0],
+ .num_resources = 1,
+ },
+ {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &lubbock_flash_data[1],
+ },
+ .resource = &flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
&lub_audio_device,
&smc91x_device,
+ &lubbock_flash_device[0],
+ &lubbock_flash_device[1],
};
static struct pxafb_mach_info sharp_lm8v31 __initdata = {
static void __init lubbock_init(void)
{
+ int flashboot = (LUB_CONF_SWITCHES & 1);
+
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
pxa_set_ficp_info(&lubbock_ficp_platform_data);
+
+ lubbock_flash_data[0].width = lubbock_flash_data[1].width =
+ (BOOT_DEF & 1) ? 2 : 4;
+ /* Compensate for the nROMBT switch which swaps the flash banks */
+ printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+ flashboot?"Flash":"ROM", flashboot);
+
+ lubbock_flash_data[flashboot^1].name = "application-flash";
+ lubbock_flash_data[flashboot].name = "boot-rom";
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/mainstone.h>
.dev = { .platform_data = &mst_audio_ops },
};
+static struct resource flash_resources[] = {
+ [0] = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition mainstoneflash0_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000,
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ }
+};
+
+static struct flash_platform_data mst_flash_data[2] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = mainstoneflash0_partitions,
+ .nr_parts = ARRAY_SIZE(mainstoneflash0_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device mst_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mst_flash_data[0],
+ },
+ .resource = &flash_resources[0],
+ .num_resources = 1,
+ },
+ {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &mst_flash_data[1],
+ },
+ .resource = &flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
static void mainstone_backlight_power(int on)
{
if (on) {
.transceiver_mode = mainstone_irda_transceiver_mode,
};
+static struct platform_device *platform_devices[] __initdata = {
+ &smc91x_device,
+ &mst_audio_device,
+ &mst_flash_device[0],
+ &mst_flash_device[1],
+};
+
static void __init mainstone_init(void)
{
+ int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+
+ mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ mst_flash_data[1].width = 4;
+
+ /* Compensate for SW7 which swaps the flash banks */
+ mst_flash_data[SW7].name = "processor-flash";
+ mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
+
+ printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+ mst_flash_data[0].name);
+
/*
* On Mainstone, we route AC97_SYSCLK via GPIO45 to
* the audio daughter card
*/
pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
- platform_device_register(&smc91x_device);
- platform_device_register(&mst_audio_device);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
/* reading Mainstone's "Virtual Configuration Register"
might be handy to select LCD type here */
select CPU_COPY_V6
select CPU_TLB_V6
+# ARMv6k
+config CPU_32v6K
+ bool "Support ARM V6K processor extensions" if !SMP
+ depends on CPU_V6
+ default y if SMP
+ help
+ Say Y here if your ARMv6 processor supports the 'K' extension.
+ This enables the kernel to use some instructions not present
+ on previous processors, and as such a kernel build with this
+ enabled will not boot on processors with do not support these
+ instructions.
+
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
printk(KERN_WARNING "BUG: not creating mapping for "
- "0x%016llx at 0x%08lx in user region\n",
+ "0x%08llx at 0x%08lx in user region\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
- printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx "
+ printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
"overlaps vmalloc space\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
}
if(md->pfn >= 0x100000) {
if(domain) {
printk(KERN_ERR "MM: invalid domain in supersection "
- "mapping for 0x%016llx at 0x%08lx\n",
+ "mapping for 0x%08llx at 0x%08lx\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if((md->virtual | md->length | __pfn_to_phys(md->pfn))
& ~SUPERSECTION_MASK) {
printk(KERN_ERR "MM: cannot create mapping for "
- "0x%016llx at 0x%08lx invalid alignment\n",
+ "0x%08llx at 0x%08lx invalid alignment\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
* added changelog
* 1.2 Erik Gilling: Cobalt Networks support
* Tim Hockin: general cleanup, Cobalt support
- * 1.3 Jon Ringle: Comdial MP1000 support
- *
*/
-#define NVRAM_VERSION "1.3"
+#define NVRAM_VERSION "1.2"
#include <linux/module.h>
#include <linux/config.h>
#define PC 1
#define ATARI 2
#define COBALT 3
-#define MP1000 4
/* select machine configuration */
#if defined(CONFIG_ATARI)
# if defined(CONFIG_COBALT)
# include <linux/cobalt-nvram.h>
# define MACH COBALT
-# elif defined(CONFIG_MACH_MP1000)
-# undef MACH
-# define MACH MP1000
# else
# define MACH PC
# endif
#endif
-#if MACH == MP1000
-
-/* RTC in a MP1000 */
-#define CHECK_DRIVER_INIT() 1
-
-#define MP1000_CKS_RANGE_START 0
-#define MP1000_CKS_RANGE_END 111
-#define MP1000_CKS_LOC 112
-
-#define NVRAM_BYTES (128-NVRAM_FIRST_BYTE)
-
-#define mach_check_checksum mp1000_check_checksum
-#define mach_set_checksum mp1000_set_checksum
-#define mach_proc_infos mp1000_proc_infos
-
-#endif
-
/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
* rtc_lock held. Due to the index-port/data-port design of the RTC, we
* don't want two different things trying to get to it at once. (e.g. the
#endif /* MACH == ATARI */
-#if MACH == MP1000
-
-static int
-mp1000_check_checksum(void)
-{
- int i;
- unsigned short sum = 0;
- unsigned short expect;
-
- for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
- sum += __nvram_read_byte(i);
-
- expect = __nvram_read_byte(MP1000_CKS_LOC+1)<<8 |
- __nvram_read_byte(MP1000_CKS_LOC);
- return ((sum & 0xffff) == expect);
-}
-
-static void
-mp1000_set_checksum(void)
-{
- int i;
- unsigned short sum = 0;
-
- for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
- sum += __nvram_read_byte(i);
- __nvram_write_byte(sum >> 8, MP1000_CKS_LOC + 1);
- __nvram_write_byte(sum & 0xff, MP1000_CKS_LOC);
-}
-
-#ifdef CONFIG_PROC_FS
-
-#define SERVER_N_LEN 32
-#define PATH_N_LEN 32
-#define FILE_N_LEN 32
-#define NVRAM_MAGIC_SIG 0xdead
-
-typedef struct NvRamImage
-{
- unsigned short int magic;
- unsigned short int mode;
- char fname[FILE_N_LEN];
- char path[PATH_N_LEN];
- char server[SERVER_N_LEN];
- char pad[12];
-} NvRam;
-
-static int
-mp1000_proc_infos(unsigned char *nvram, char *buffer, int *len,
- off_t *begin, off_t offset, int size)
-{
- int checksum;
- NvRam* nv = (NvRam*)nvram;
-
- spin_lock_irq(&rtc_lock);
- checksum = __nvram_check_checksum();
- spin_unlock_irq(&rtc_lock);
-
- PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not ");
-
- switch( nv->mode )
- {
- case 0 :
- PRINT_PROC( "\tMode 0, tftp prompt\n" );
- break;
- case 1 :
- PRINT_PROC( "\tMode 1, booting from disk\n" );
- break;
- case 2 :
- PRINT_PROC( "\tMode 2, Alternate boot from disk /boot/%s\n", nv->fname );
- break;
- case 3 :
- PRINT_PROC( "\tMode 3, Booting from net:\n" );
- PRINT_PROC( "\t\t%s:%s%s\n",nv->server, nv->path, nv->fname );
- break;
- default:
- PRINT_PROC( "\tInconsistant nvram?\n" );
- break;
- }
-
- return 1;
-}
-#endif
-
-#endif /* MACH == MP1000 */
-
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(__nvram_read_byte);
config CS89x0
tristate "CS89x0 support"
- depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000
+ depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
-#elif defined(CONFIG_MACH_MP1000)
-#include <asm/arch/mp1000-seprom.h>
-static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0};
-static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0};
#else
static unsigned int netcard_portlist[] __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
cnt -= j;
}
} else
-#elif defined(CONFIG_MACH_MP1000)
- if (1) {
- memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN);
- } else
#endif
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
if (1) {
printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
} else
-#elif defined(CONFIG_MACH_MP1000)
- if (1) {
- lp->force |= FORCE_RJ45;
- } else
#endif
if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
else
#endif
{
-#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000)
+#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
#include <linux/config.h>
-#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000)
+#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
/* IXDP2401/IXDP2801 uses dword-aligned register addressing */
#define CS89x0_PORT(reg) ((reg) * 2)
#else
{
.iobase = SYSCON1,
.irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
-#ifdef CONFIG_MP1000_90MHZ
- .uartclk = 4515840,
-#else
.uartclk = 3686400,
-#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 0,
{
.iobase = SYSCON2,
.irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
-#ifdef CONFIG_MP1000_90MHZ
- .uartclk = 4515840,
-#else
.uartclk = 3686400,
-#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 1,
static struct uart_driver clps711x_reg = {
.driver_name = "ttyCL",
.dev_name = "ttyCL",
- .devfs_name = "ttyCL",
.major = SERIAL_CLPS711X_MAJOR,
.minor = SERIAL_CLPS711X_MINOR,
.nr = UART_NR,
#define CEIVA_PB0_BLK_BTN (1<<0)
#endif // #if defined (CONFIG_ARCH_CEIVA)
-#if defined (CONFIG_MACH_MP1000)
-/* NOR FLASH */
-#define MP1000_NIO_BASE 0xf9000000 /* virtual */
-#define MP1000_NIO_START CS0_PHYS_BASE /* physical */
-#define MP1000_NIO_SIZE 0x00400000
-
-/* DSP Interface */
-#define MP1000_DSP_BASE 0xfa000000 /* virtual */
-#define MP1000_DSP_START CS1_PHYS_BASE /* physical */
-#define MP1000_DSP_SIZE 0x00100000
-
-/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
-#define MP1000_LIO_BASE 0xfb000000 /* virtual */
-#define MP1000_LIO_START CS2_PHYS_BASE /* physical */
-#define MP1000_LIO_SIZE 0x00100000
-
-/* NAND FLASH */
-#define MP1000_FIO_BASE 0xfc000000 /* virtual */
-#define MP1000_FIO_START CS3_PHYS_BASE /* physical */
-#define MP1000_FIO_SIZE 0x00800000
-
-/* Ethernet */
-#define MP1000_EIO_BASE 0xfd000000 /* virtual */
-#define MP1000_EIO_START CS4_PHYS_BASE /* physical */
-#define MP1000_EIO_SIZE 0x00100000
-
-#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */
-#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/
-#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */
-#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */
-
-/* IDE */
-#define MP1000_IDE_BASE 0xfe000000 /* virtual */
-#define MP1000_IDE_START CS5_PHYS_BASE /* physical */
-#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */
-
-#define IRQ_HARDDISK IRQ_EINT2
-
-/*
- * IDE registers definition
- */
-
-#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000)
-#define IDE_BASE_OFF (MP1000_IDE_BASE)
-
-#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0)
-#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2)
-#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4)
-#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6)
-#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8)
-#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa)
-#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc)
-#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe)
-#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc)
-
-#define IDE_IRQ IRQ_EINT2
-
-
-#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2))
-#define RTC_ALWAYS_BCD 0
-
-/*
-// Definitions of the bit fields in the HwPortA register for the
-// MP1000 board.
-*/
-#define HwPortAKeyboardRow1 0x00000001
-#define HwPortAKeyboardRow2 0x00000002
-#define HwPortAKeyboardRow3 0x00000004
-#define HwPortAKeyboardRow4 0x00000008
-#define HwPortAKeyboardRow5 0x00000010
-#define HwPortAKeyboardRow6 0x00000020
-#define HwPortALCDEnable 0x00000040
-#define HwPortAOffhook 0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortB register for the
-// MP1000 board.
-*/
-#define HwPortBL3Mode 0x00000001
-#define HwPortBL3Clk 0x00000002
-#define HwPortBSClk 0x00000001
-#define HwPortBSData 0x00000002
-#define HwPortBL3Data 0x00000004
-#define HwPortBMute 0x00000008
-#define HwPortBQD0 0x00000010
-#define HwPortBQD1 0x00000020
-#define HwPortBQD2 0x00000040
-#define HwPortBQD3 0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortD register for the
-// MP1000 board.
-*/
-#define HwPortDLED1 0x00000001
-#define HwPortDLED2 0x00000002
-#define HwPortDLED3 0x00000004
-#define HwPortDLED4 0x00000008
-#define HwPortDLED5 0x00000010
-#define HwPortDEECS 0x00000020
-#define HwPortBRTS 0x00000040
-#define HwPortBRI 0x00000080
-
-
-/*
-// Definitions of the bit fields in the HwPortE register for the
-// MP1000 board.
-*/
-
-#define HwPortECLE 0x00000001
-#define HwPortESepromDOut 0x00000001
-#define HwPortEALE 0x00000002
-#define HwPortESepromDIn 0x00000002
-#define HwPortENANDCS 0x00000004
-#define HwPortESepromCLK 0x00000004
-
-#endif // #if defined (CONFIG_MACH_MP1000)
-
#endif
+++ /dev/null
-#ifndef MP1000_SEPROM_H
-#define MP1000_SEPROM_H
-
-/*
- * mp1000-seprom.h
- *
- *
- * This file contains the Serial EEPROM definitions for the MP1000 board
- *
- * Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#define COMMAND_ERASE (0x1C0)
-#define COMMAND_ERASE_ALL (0x120)
-#define COMMAND_WRITE_DISABLE (0x100)
-#define COMMAND_WRITE_ENABLE (0x130)
-#define COMMAND_READ (0x180)
-#define COMMAND_WRITE (0x140)
-#define COMMAND_WRITE_ALL (0x110)
-
-//
-// Serial EEPROM data format
-//
-
-#define PACKED __attribute__ ((packed))
-
-typedef struct _EEPROM {
- union {
- unsigned char eprom_byte_data[128];
- unsigned short eprom_short_data[64];
- struct {
- unsigned char version PACKED; // EEPROM Version "1" for now
- unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc)
- unsigned char major_hw_version PACKED; // Major Hardware version (Hex)
- unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex)
- unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic)
- unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number
- unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD)
- unsigned char country PACKED; // Country of deployment
- unsigned char mac_Address[6] PACKED; // MAC Address
- unsigned char oem_string[20] PACKED; // OEM ID string
- unsigned short feature_bits1 PACKED; // Feature Bits 1
- unsigned short feature_bits2 PACKED; // Feature Bits 2
- unsigned char filler[75] PACKED; // Unused/Undefined \930\94 initialized
- unsigned short checksum PACKED; // byte accumulated short checksum
- } eprom_struct;
- } variant;
-} eeprom_struct;
-
-/* These settings must be mutually exclusive */
-#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */
-#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */
-#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */
-
-#define FEATURE_BITS1_CPUIS90MEG 0x0010
-
-extern void seprom_init(void);
-extern eeprom_struct* get_seprom_ptr(void);
-extern unsigned char* get_eeprom_mac_address(void);
-
-#endif /* MP1000_SEPROM_H */
-
#define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1)
#define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA)
-//#define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1)
+/* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */
#define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */
#define IOP321_PCI_LOWER_MEM_PA 0x80000000
#define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0)
#define IRQ_IXP2000_PCIA 40
#define IRQ_IXP2000_PCIB 41
-#define NR_IXP2000_IRQS 42
+/* Int sources from IRQ_ERROR_STATUS */
+#define IRQ_IXP2000_DRAM0_MIN_ERR 42
+#define IRQ_IXP2000_DRAM0_MAJ_ERR 43
+#define IRQ_IXP2000_DRAM1_MIN_ERR 44
+#define IRQ_IXP2000_DRAM1_MAJ_ERR 45
+#define IRQ_IXP2000_DRAM2_MIN_ERR 46
+#define IRQ_IXP2000_DRAM2_MAJ_ERR 47
+/* 48-57 reserved */
+#define IRQ_IXP2000_SRAM0_ERR 58
+#define IRQ_IXP2000_SRAM1_ERR 59
+#define IRQ_IXP2000_SRAM2_ERR 60
+#define IRQ_IXP2000_SRAM3_ERR 61
+/* 62-65 reserved */
+#define IRQ_IXP2000_MEDIA_ERR 66
+#define IRQ_IXP2000_PCI_ERR 67
+#define IRQ_IXP2000_SP_INT 68
+
+#define NR_IXP2000_IRQS 69
#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x))
#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS))
+#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
+#define IXP2000_VALID_ERR_IRQ_MASK (\
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
+ IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) )
+
/*
* This allows for all the on-chip sources plus up to 32 CPLD based
* IRQs. Should be more than enough.
cpu_set(cpu, next->cpu_vm_mask);
check_context(next);
cpu_switch_mm(next->pgd, next);
- cpu_clear(cpu, prev->cpu_vm_mask);
+ if (cache_is_vivt())
+ cpu_clear(cpu, prev->cpu_vm_mask);
}
}
projects / mirror_ubuntu-bionic-kernel.git / commitdiff