}
+int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *new_state)
+{
+ struct vmw_display_unit *du = vmw_crtc_to_du(new_state->crtc);
+ int connector_mask = 1 << drm_connector_index(&du->connector);
+ bool has_primary = new_state->plane_mask &
+ BIT(drm_plane_index(crtc->primary));
+
+ /* We always want to have an active plane with an active CRTC */
+ if (has_primary != new_state->enable)
+ return -EINVAL;
+
+
+ if (new_state->connector_mask != connector_mask &&
+ new_state->connector_mask != 0) {
+ DRM_ERROR("Invalid connectors configuration\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Our virtual device does not have a dot clock, so use the logical
+ * clock value as the dot clock.
+ */
+ if (new_state->mode.crtc_clock == 0)
+ new_state->adjusted_mode.crtc_clock = new_state->mode.clock;
+
+ return 0;
+}
+
+
+void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state)
+{
+}
+
+
+void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state)
+{
+ struct drm_pending_vblank_event *event = crtc->state->event;
+
+ if (event) {
+ crtc->state->event = NULL;
+
+ spin_lock_irq(&crtc->dev->event_lock);
+ if (drm_crtc_vblank_get(crtc) == 0)
+ drm_crtc_arm_vblank_event(crtc, event);
+ else
+ drm_crtc_send_vblank_event(crtc, event);
+ spin_unlock_irq(&crtc->dev->event_lock);
+ }
+
+}
+
+
/**
* vmw_du_crtc_duplicate_state - duplicate crtc state
* @crtc: DRM crtc
* @surf Display surface for STDU
* @dmabuf display dmabuf for SOU
* @content_fb_type Used by STDU.
+ * @dmabuf_size Size of the dmabuf, used by Screen Object Display Unit
* @pinned pin count for STDU display surface
*/
struct vmw_plane_state {
struct vmw_dma_buffer *dmabuf;
int content_fb_type;
+ unsigned long dmabuf_size;
int pinned;
};
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h);
+/* Atomic Helpers */
void vmw_du_plane_reset(struct drm_plane *plane);
struct drm_plane_state *vmw_du_plane_duplicate_state(struct drm_plane *plane);
void vmw_du_plane_destroy_state(struct drm_plane *plane,
struct drm_plane_state *state);
+int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *state);
+void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state);
+void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state);
void vmw_du_crtc_reset(struct drm_crtc *crtc);
struct drm_crtc_state *vmw_du_crtc_duplicate_state(struct drm_crtc *crtc);
void vmw_du_crtc_destroy_state(struct drm_crtc *crtc,
if (vfb != ld->fb) {
if (ld->fb && ld->fb->unpin)
ld->fb->unpin(ld->fb);
+ vmw_svga_enable(vmw_priv);
if (vfb->pin)
vfb->pin(vfb);
ld->fb = vfb;
return 0;
}
+/**
+ * vmw_ldu_crtc_mode_set_nofb - Enable svga
+ *
+ * @crtc: CRTC associated with the new screen
+ *
+ * For LDU, just enable the svga
+ */
+static void vmw_ldu_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+}
+
+/**
+ * vmw_ldu_crtc_helper_prepare - Noop
+ *
+ * @crtc: CRTC associated with the new screen
+ *
+ * Prepares the CRTC for a mode set, but we don't need to do anything here.
+ *
+ */
+static void vmw_ldu_crtc_helper_prepare(struct drm_crtc *crtc)
+{
+}
+
+/**
+ * vmw_ldu_crtc_helper_commit - Noop
+ *
+ * @crtc: CRTC associated with the new screen
+ *
+ * This is called after a mode set has been completed. Here's
+ * usually a good place to call vmw_ldu_add_active/vmw_ldu_del_active
+ * but since for LDU the display plane is closely tied to the
+ * CRTC, it makes more sense to do those at plane update time.
+ */
+static void vmw_ldu_crtc_helper_commit(struct drm_crtc *crtc)
+{
+ struct vmw_private *dev_priv;
+ struct vmw_legacy_display_unit *ldu;
+ struct vmw_framebuffer *vfb;
+ struct drm_framebuffer *fb;
+
+
+ ldu = vmw_crtc_to_ldu(crtc);
+ dev_priv = vmw_priv(crtc->dev);
+ fb = crtc->primary->fb;
+
+ vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
+
+ if (vfb)
+ vmw_ldu_add_active(dev_priv, ldu, vfb);
+ else
+ vmw_ldu_del_active(dev_priv, ldu);
+}
+
+/**
+ * vmw_ldu_crtc_helper_disable - Turns off CRTC
+ *
+ * @crtc: CRTC to be turned off
+ */
+static void vmw_ldu_crtc_helper_disable(struct drm_crtc *crtc)
+{
+}
+
static int vmw_ldu_crtc_set_config(struct drm_mode_set *set)
{
struct vmw_private *dev_priv;
.atomic_destroy_state = vmw_du_plane_destroy_state,
};
+/*
+ * Atomic Helpers
+ */
+static const struct drm_crtc_helper_funcs vmw_ldu_crtc_helper_funcs = {
+ .prepare = vmw_ldu_crtc_helper_prepare,
+ .commit = vmw_ldu_crtc_helper_commit,
+ .disable = vmw_ldu_crtc_helper_disable,
+ .mode_set = drm_helper_crtc_mode_set,
+ .mode_set_nofb = vmw_ldu_crtc_mode_set_nofb,
+ .atomic_check = vmw_du_crtc_atomic_check,
+ .atomic_begin = vmw_du_crtc_atomic_begin,
+ .atomic_flush = vmw_du_crtc_atomic_flush,
+};
+
static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
{
goto err_free_unregister;
}
+ drm_crtc_helper_add(crtc, &vmw_ldu_crtc_helper_funcs);
+
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
return ret;
}
+/**
+ * vmw_sou_crtc_mode_set_nofb - Create new screen
+ *
+ * @crtc: CRTC associated with the new screen
+ *
+ * This function creates/destroys a screen. This function cannot fail, so if
+ * somehow we run into a failure, just do the best we can to get out.
+ */
+static void vmw_sou_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+ struct vmw_private *dev_priv;
+ struct vmw_screen_object_unit *sou;
+ struct vmw_framebuffer *vfb;
+ struct drm_framebuffer *fb;
+ struct drm_plane_state *ps;
+ struct vmw_plane_state *vps;
+ int ret;
+
+
+ sou = vmw_crtc_to_sou(crtc);
+ dev_priv = vmw_priv(crtc->dev);
+ ps = crtc->primary->state;
+ fb = ps->fb;
+ vps = vmw_plane_state_to_vps(ps);
+
+ vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
+
+ if (sou->defined) {
+ ret = vmw_sou_fifo_destroy(dev_priv, sou);
+ if (ret) {
+ DRM_ERROR("Failed to destroy Screen Object\n");
+ return;
+ }
+ }
+
+ if (vfb) {
+ sou->buffer = vps->dmabuf;
+ sou->buffer_size = vps->dmabuf_size;
+
+ ret = vmw_sou_fifo_create(dev_priv, sou, crtc->x, crtc->y,
+ &crtc->mode);
+ if (ret)
+ DRM_ERROR("Failed to define Screen Object %dx%d\n",
+ crtc->x, crtc->y);
+
+ vmw_kms_add_active(dev_priv, &sou->base, vfb);
+ } else {
+ sou->buffer = NULL;
+ sou->buffer_size = 0;
+
+ vmw_kms_del_active(dev_priv, &sou->base);
+ }
+}
+
+/**
+ * vmw_sou_crtc_helper_prepare - Noop
+ *
+ * @crtc: CRTC associated with the new screen
+ *
+ * Prepares the CRTC for a mode set, but we don't need to do anything here.
+ */
+static void vmw_sou_crtc_helper_prepare(struct drm_crtc *crtc)
+{
+}
+
+/**
+ * vmw_sou_crtc_helper_commit - Noop
+ *
+ * @crtc: CRTC associated with the new screen
+ *
+ * This is called after a mode set has been completed.
+ */
+static void vmw_sou_crtc_helper_commit(struct drm_crtc *crtc)
+{
+}
+
+/**
+ * vmw_sou_crtc_helper_disable - Turns off CRTC
+ *
+ * @crtc: CRTC to be turned off
+ */
+static void vmw_sou_crtc_helper_disable(struct drm_crtc *crtc)
+{
+ struct vmw_private *dev_priv;
+ struct vmw_screen_object_unit *sou;
+ int ret;
+
+
+ if (!crtc) {
+ DRM_ERROR("CRTC is NULL\n");
+ return;
+ }
+
+ sou = vmw_crtc_to_sou(crtc);
+ dev_priv = vmw_priv(crtc->dev);
+
+ if (sou->defined) {
+ ret = vmw_sou_fifo_destroy(dev_priv, sou);
+ if (ret)
+ DRM_ERROR("Failed to destroy Screen Object\n");
+ }
+}
+
static int vmw_sou_crtc_set_config(struct drm_mode_set *set)
{
struct vmw_private *dev_priv;
.atomic_destroy_state = vmw_du_plane_destroy_state,
};
+/*
+ * Atomic Helpers
+ */
+static const struct drm_crtc_helper_funcs vmw_sou_crtc_helper_funcs = {
+ .prepare = vmw_sou_crtc_helper_prepare,
+ .commit = vmw_sou_crtc_helper_commit,
+ .disable = vmw_sou_crtc_helper_disable,
+ .mode_set = drm_helper_crtc_mode_set,
+ .mode_set_nofb = vmw_sou_crtc_mode_set_nofb,
+ .atomic_check = vmw_du_crtc_atomic_check,
+ .atomic_begin = vmw_du_crtc_atomic_begin,
+ .atomic_flush = vmw_du_crtc_atomic_flush,
+};
+
static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
{
goto err_free_unregister;
}
+ drm_crtc_helper_add(crtc, &vmw_sou_crtc_helper_funcs);
+
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
return ret;
}
+
+/**
+ * vmw_stdu_crtc_mode_set_nofb - Updates screen target size
+ *
+ * @crtc: CRTC associated with the screen target
+ *
+ * This function defines/destroys a screen target
+ *
+ */
+static void vmw_stdu_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+ struct vmw_private *dev_priv;
+ struct vmw_screen_target_display_unit *stdu;
+ int ret;
+
+
+ stdu = vmw_crtc_to_stdu(crtc);
+ dev_priv = vmw_priv(crtc->dev);
+
+ if (stdu->defined) {
+ ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
+ if (ret)
+ DRM_ERROR("Failed to blank CRTC\n");
+
+ (void) vmw_stdu_update_st(dev_priv, stdu);
+
+ ret = vmw_stdu_destroy_st(dev_priv, stdu);
+ if (ret)
+ DRM_ERROR("Failed to destroy Screen Target\n");
+
+ stdu->content_fb_type = SAME_AS_DISPLAY;
+ }
+
+ if (!crtc->state->enable)
+ return;
+
+ vmw_svga_enable(dev_priv);
+ ret = vmw_stdu_define_st(dev_priv, stdu, &crtc->mode, crtc->x, crtc->y);
+
+ if (ret)
+ DRM_ERROR("Failed to define Screen Target of size %dx%d\n",
+ crtc->x, crtc->y);
+}
+
+
+static void vmw_stdu_crtc_helper_prepare(struct drm_crtc *crtc)
+{
+}
+
+
+static void vmw_stdu_crtc_helper_commit(struct drm_crtc *crtc)
+{
+ struct vmw_private *dev_priv;
+ struct vmw_screen_target_display_unit *stdu;
+ struct vmw_framebuffer *vfb;
+ struct drm_framebuffer *fb;
+
+
+ stdu = vmw_crtc_to_stdu(crtc);
+ dev_priv = vmw_priv(crtc->dev);
+ fb = crtc->primary->fb;
+
+ vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
+
+ if (vfb)
+ vmw_kms_add_active(dev_priv, &stdu->base, vfb);
+ else
+ vmw_kms_del_active(dev_priv, &stdu->base);
+}
+
+static void vmw_stdu_crtc_helper_disable(struct drm_crtc *crtc)
+{
+ struct vmw_private *dev_priv;
+ struct vmw_screen_target_display_unit *stdu;
+ int ret;
+
+
+ if (!crtc) {
+ DRM_ERROR("CRTC is NULL\n");
+ return;
+ }
+
+ stdu = vmw_crtc_to_stdu(crtc);
+ dev_priv = vmw_priv(crtc->dev);
+
+ if (stdu->defined) {
+ ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
+ if (ret)
+ DRM_ERROR("Failed to blank CRTC\n");
+
+ (void) vmw_stdu_update_st(dev_priv, stdu);
+
+ ret = vmw_stdu_destroy_st(dev_priv, stdu);
+ if (ret)
+ DRM_ERROR("Failed to destroy Screen Target\n");
+
+ stdu->content_fb_type = SAME_AS_DISPLAY;
+ }
+}
+
/**
* vmw_stdu_crtc_set_config - Sets a mode
*
};
+/*
+ * Atomic Helpers
+ */
+static const struct drm_crtc_helper_funcs vmw_stdu_crtc_helper_funcs = {
+ .prepare = vmw_stdu_crtc_helper_prepare,
+ .commit = vmw_stdu_crtc_helper_commit,
+ .disable = vmw_stdu_crtc_helper_disable,
+ .mode_set = drm_helper_crtc_mode_set,
+ .mode_set_nofb = vmw_stdu_crtc_mode_set_nofb,
+ .atomic_check = vmw_du_crtc_atomic_check,
+ .atomic_begin = vmw_du_crtc_atomic_begin,
+ .atomic_flush = vmw_du_crtc_atomic_flush,
+};
+
+
/**
* vmw_stdu_init - Sets up a Screen Target Display Unit
*
goto err_free_unregister;
}
+ drm_crtc_helper_add(crtc, &vmw_stdu_crtc_helper_funcs);
+
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
projects / mirror_ubuntu-focal-kernel.git / commitdiff