ath9k: Program correct initvals for FCC

* CUS217 specific initvals have to be programmed.
* iniAdditional is not used for AR9462/AR9565, remove it.
* Handle channel 2484 for regulatory compliance.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 57e345a27914acbd9f9ed87952b0e0b581e970ab..2db4ddf74bc2c9106d1b6997a34b6c7ce4c77ff8 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1517,6 +1517,18 @@ static int ar9003_hw_fast_chan_change(struct ath_hw *ah,
 
        REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
 
+       if (AR_SREV_9462_20_OR_LATER(ah)) {
+               /*
+                * CUS217 mix LNA mode.
+                */
+               if (ar9003_hw_get_rx_gain_idx(ah) == 2) {
+                       REG_WRITE_ARRAY(&ah->ini_modes_rxgain_bb_core,
+                                       1, regWrites);
+                       REG_WRITE_ARRAY(&ah->ini_modes_rxgain_bb_postamble,
+                                       modesIndex, regWrites);
+               }
+       }
+
        /*
         * For 5GHz channels requiring Fast Clock, apply
         * different modal values.
@@ -1527,7 +1539,11 @@ static int ar9003_hw_fast_chan_change(struct ath_hw *ah,
        if (AR_SREV_9565(ah))
                REG_WRITE_ARRAY(&ah->iniModesFastClock, 1, regWrites);
 
-       REG_WRITE_ARRAY(&ah->iniAdditional, 1, regWrites);
+       /*
+        * JAPAN regulatory.
+        */
+       if (chan->channel == 2484)
+               ar9003_hw_prog_ini(ah, &ah->iniCckfirJapan2484, 1);
 
        ah->modes_index = modesIndex;
        *ini_reloaded = true;