[ARM] mm: enable sparsemem on clps7500 and RiscPC

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4eb816c4df7dc1581e04c94c6e40a42ca21d5a8b..83106c98755c87b8a84307bc93c4215a158370fe 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -250,6 +250,7 @@ config ARCH_CLPS7500
        select TIMER_ACORN
        select ISA
        select NO_IOPORT
+       select ARCH_SPARSEMEM_ENABLE
        help
          Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -470,6 +471,7 @@ config ARCH_RPC
        select HAVE_PATA_PLATFORM
        select ISA_DMA_API
        select NO_IOPORT
+       select ARCH_SPARSEMEM_ENABLE
        help
          On the Acorn Risc-PC, Linux can support the internal IDE disk and
          CD-ROM interface, serial and parallel port, and the floppy drive.

diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index 277158191a0d2c0a5a0fc3858d6ba54a7d8539c5..00098615c6f0c35506f9628bb08dc81c39dca7a7 100644 (file)
--- a/arch/arm/include/asm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
@@ -3,8 +3,22 @@
 
 #include <asm/memory.h>
 
-#define MAX_PHYSADDR_BITS      32
-#define MAX_PHYSMEM_BITS       32
-#define SECTION_SIZE_BITS      NODE_MEM_SIZE_BITS
+/*
+ * Two definitions are required for sparsemem:
+ *
+ * MAX_PHYSMEM_BITS: The number of physical address bits required
+ *   to address the last byte of memory.
+ *
+ * SECTION_SIZE_BITS: The number of physical address bits to cover
+ *   the maximum amount of memory in a section.
+ *
+ * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
+ * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
+ *
+ * Define these in your mach/memory.h.
+ */
+#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
+#error Sparsemem is not supported on this platform
+#endif
 
 #endif

diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
index 3326aa99d3eceda08e3ca78288e11ca110da6e82..87b32db470c812a10bd48563bb3c2cd71263cfa0 100644 (file)
--- a/arch/arm/mach-clps7500/include/mach/memory.h
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -32,4 +32,12 @@
 #define FLUSH_BASE_PHYS                0x00000000
 #define FLUSH_BASE             0xdf000000
 
+/*
+ * Sparsemem support.  Each section is a maximum of 64MB.  The sections
+ * are offset by 128MB and can cover 128MB, so that gives us a maximum
+ * of 29 physmem bits.
+ */
+#define MAX_PHYSMEM_BITS       29
+#define SECTION_SIZE_BITS      26
+
 #endif

diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
index 05425d558ee794518be2bc4508fd48fd20c59d84..9bf7e43e286337f8847a59c79c96303a022d9f45 100644 (file)
--- a/arch/arm/mach-rpc/include/mach/memory.h
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -36,4 +36,12 @@
 #define FLUSH_BASE_PHYS                0x00000000
 #define FLUSH_BASE             0xdf000000
 
+/*
+ * Sparsemem support.  Each section is a maximum of 64MB.  The sections
+ * are offset by 128MB and can cover 128MB, so that gives us a maximum
+ * of 29 physmem bits.
+ */
+#define MAX_PHYSMEM_BITS       29
+#define SECTION_SIZE_BITS      26
+
 #endif