]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/commitdiff
ARM: ux500: switch MSP to using pinctrl for pins
authorLinus Walleij <linus.walleij@linaro.org>
Mon, 7 May 2012 08:34:16 +0000 (10:34 +0200)
committerLinus Walleij <linus.walleij@linaro.org>
Fri, 11 May 2012 09:14:19 +0000 (11:14 +0200)
The MSP platform data callbacks use the old custom callbacks to
set the state of the pins, switch over to using pinctrl.

Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
arch/arm/mach-ux500/board-mop500-msp.c
arch/arm/mach-ux500/board-mop500-pins.c

index aacaf80c66a1d18c9f8e8c8664aee273a45cd33c..996048038743f777e114ff6a48bc2bb682271a46 100644 (file)
@@ -7,17 +7,18 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <plat/gpio-nomadik.h>
+#include <linux/pinctrl/consumer.h>
 
+#include <plat/gpio-nomadik.h>
 #include <plat/pincfg.h>
 #include <plat/ste_dma40.h>
 
 #include <mach/devices.h>
-#include <ste-dma40-db8500.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/msp.h>
 
+#include "ste-dma40-db8500.h"
 #include "board-mop500.h"
 #include "devices-db8500.h"
 #include "pins-db8500.h"
@@ -28,19 +29,10 @@ static DEFINE_SPINLOCK(msp_rxtx_lock);
 /* Reference Count */
 static int msp_rxtx_ref;
 
-static pin_cfg_t mop500_msp1_pins_init[] = {
-               GPIO33_MSP1_TXD | PIN_OUTPUT_LOW   | PIN_SLPM_WAKEUP_DISABLE,
-               GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
-               GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
-               GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
-};
-
-static pin_cfg_t mop500_msp1_pins_exit[] = {
-               GPIO33_MSP1_TXD | PIN_OUTPUT_LOW   | PIN_SLPM_WAKEUP_ENABLE,
-               GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
-               GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
-               GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
-};
+/* Pin modes */
+struct pinctrl *msp1_p;
+struct pinctrl_state *msp1_def;
+struct pinctrl_state *msp1_sleep;
 
 int msp13_i2s_init(void)
 {
@@ -48,9 +40,11 @@ int msp13_i2s_init(void)
        unsigned long flags;
 
        spin_lock_irqsave(&msp_rxtx_lock, flags);
-       if (msp_rxtx_ref == 0)
-               retval = nmk_config_pins(
-                               ARRAY_AND_SIZE(mop500_msp1_pins_init));
+       if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
+               retval = pinctrl_select_state(msp1_p, msp1_def);
+               if (retval)
+                       pr_err("could not set MSP1 defstate\n");
+       }
        if (!retval)
                msp_rxtx_ref++;
        spin_unlock_irqrestore(&msp_rxtx_lock, flags);
@@ -66,9 +60,11 @@ int msp13_i2s_exit(void)
        spin_lock_irqsave(&msp_rxtx_lock, flags);
        WARN_ON(!msp_rxtx_ref);
        msp_rxtx_ref--;
-       if (msp_rxtx_ref == 0)
-               retval = nmk_config_pins_sleep(
-                               ARRAY_AND_SIZE(mop500_msp1_pins_exit));
+       if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
+               retval = pinctrl_select_state(msp1_p, msp1_sleep);
+               if (retval)
+                       pr_err("could not set MSP1 sleepstate\n");
+       }
        spin_unlock_irqrestore(&msp_rxtx_lock, flags);
 
        return retval;
@@ -229,19 +225,41 @@ static struct msp_i2s_platform_data msp3_platform_data = {
 
 int mop500_msp_init(struct device *parent)
 {
+       struct platform_device *msp1;
+
        pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
        platform_device_register(&snd_soc_u8500);
 
        pr_info("Initialize MSP I2S-devices.\n");
        db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
                           &msp0_platform_data);
-       db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+       msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
                           &msp1_platform_data);
        db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
                           &msp2_platform_data);
        db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
                           &msp3_platform_data);
 
+       /* Get the pinctrl handle for MSP1 */
+       if (msp1) {
+               msp1_p = pinctrl_get(&msp1->dev);
+               if (IS_ERR(msp1_p))
+                       dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
+               else {
+                       msp1_def = pinctrl_lookup_state(msp1_p,
+                                                       PINCTRL_STATE_DEFAULT);
+                       if (IS_ERR(msp1_def)) {
+                               dev_err(&msp1->dev,
+                                       "could not get MSP1 defstate\n");
+                       }
+                       msp1_sleep = pinctrl_lookup_state(msp1_p,
+                                                         PINCTRL_STATE_SLEEP);
+                       if (IS_ERR(msp1_sleep))
+                               dev_err(&msp1->dev,
+                                       "could not get MSP1 idlestate\n");
+               }
+       }
+
        pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
        platform_device_register(&ux500_pcm);
 
index dccd29d6fff6e482651a2b7b6eb3fbd57aba7c2e..32fd99204464a25da4dba6012b575ea844521aaf 100644 (file)
@@ -32,12 +32,14 @@ static enum custom_pin_cfg_t pinsfor;
 BIAS(pd, PIN_PULL_DOWN);
 BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
 BIAS(in_nopull, PIN_INPUT_NOPULL);
+BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
 BIAS(in_pu, PIN_INPUT_PULLUP);
 BIAS(in_pd, PIN_INPUT_PULLDOWN);
 BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP);
 BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW);
 BIAS(out_hi, PIN_OUTPUT_HIGH);
 BIAS(out_lo, PIN_OUTPUT_LOW);
+BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
 /* These also force them into GPIO mode */
 BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
 BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
@@ -47,7 +49,9 @@ BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
 BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
 /* Sleep modes */
 BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE);
 BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
 BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
 
 /* We use these to define hog settings that are always done on boot */
@@ -129,11 +133,23 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
        DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
        DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
        DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
-       /* Sleep state for UART0 */
+       /* UART0 sleep state */
        DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"),
        DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"),
        DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"),
        DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"),
+       /* MSP1 for ALSA codec */
+       DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
+       DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
+       DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"),
+       DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+       DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+       DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+       /* MSP1 sleep state */
+       DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"),
+       DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
+       DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
+       DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
        /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
        DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
        DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),