#include <linux/ipmi_smi.h>
#include <asm/io.h>
#include "ipmi_si_sm.h"
+#include "ipmi_dmi.h"
#include <linux/dmi.h>
#include <linux/string.h>
#include <linux/ctype.h>
}
#endif
-#ifdef CONFIG_DMI
-struct dmi_ipmi_data {
- u8 type;
- u8 addr_space;
- unsigned long base_addr;
- u8 irq;
- u8 offset;
- u8 slave_addr;
-};
-
-static int decode_dmi(const struct dmi_header *dm,
- struct dmi_ipmi_data *dmi)
+#if defined(CONFIG_DMI) || defined(CONFIG_ACPI)
+struct resource *ipmi_get_info_from_resources(struct platform_device *pdev,
+ struct smi_info *info)
{
- const u8 *data = (const u8 *)dm;
- unsigned long base_addr;
- u8 reg_spacing;
- u8 len = dm->length;
-
- dmi->type = data[4];
+ struct resource *res, *res_second;
- memcpy(&base_addr, data+8, sizeof(unsigned long));
- if (len >= 0x11) {
- if (base_addr & 1) {
- /* I/O */
- base_addr &= 0xFFFE;
- dmi->addr_space = IPMI_IO_ADDR_SPACE;
- } else
- /* Memory */
- dmi->addr_space = IPMI_MEM_ADDR_SPACE;
-
- /* If bit 4 of byte 0x10 is set, then the lsb for the address
- is odd. */
- dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
-
- dmi->irq = data[0x11];
-
- /* The top two bits of byte 0x10 hold the register spacing. */
- reg_spacing = (data[0x10] & 0xC0) >> 6;
- switch (reg_spacing) {
- case 0x00: /* Byte boundaries */
- dmi->offset = 1;
- break;
- case 0x01: /* 32-bit boundaries */
- dmi->offset = 4;
- break;
- case 0x02: /* 16-byte boundaries */
- dmi->offset = 16;
- break;
- default:
- /* Some other interface, just ignore it. */
- return -EIO;
- }
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
- /* Old DMI spec. */
- /*
- * Note that technically, the lower bit of the base
- * address should be 1 if the address is I/O and 0 if
- * the address is in memory. So many systems get that
- * wrong (and all that I have seen are I/O) so we just
- * ignore that bit and assume I/O. Systems that use
- * memory should use the newer spec, anyway.
- */
- dmi->base_addr = base_addr & 0xfffe;
- dmi->addr_space = IPMI_IO_ADDR_SPACE;
- dmi->offset = 1;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res) {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ }
}
+ if (!res) {
+ dev_err(&pdev->dev, "no I/O or memory address\n");
+ return NULL;
+ }
+ info->io.addr_data = res->start;
- dmi->slave_addr = data[6];
+ info->io.regspacing = DEFAULT_REGSPACING;
+ res_second = platform_get_resource(pdev,
+ (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
+ IORESOURCE_IO : IORESOURCE_MEM,
+ 1);
+ if (res_second) {
+ if (res_second->start > info->io.addr_data)
+ info->io.regspacing =
+ res_second->start - info->io.addr_data;
+ }
+ info->io.regsize = DEFAULT_REGSIZE;
+ info->io.regshift = 0;
- return 0;
+ return res;
}
-static void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
+#endif
+
+#ifdef CONFIG_DMI
+static int dmi_ipmi_probe(struct platform_device *pdev)
{
struct smi_info *info;
+ u8 type, slave_addr;
+ int rv;
+
+ if (!si_trydmi)
+ return -ENODEV;
+
+ rv = device_property_read_u8(&pdev->dev, "ipmi-type", &type);
+ if (rv)
+ return -ENODEV;
info = smi_info_alloc();
if (!info) {
pr_err(PFX "Could not allocate SI data\n");
- return;
+ return -ENOMEM;
}
info->addr_source = SI_SMBIOS;
pr_info(PFX "probing via SMBIOS\n");
- switch (ipmi_data->type) {
- case 0x01: /* KCS */
+ switch (type) {
+ case IPMI_DMI_TYPE_KCS:
info->si_type = SI_KCS;
break;
- case 0x02: /* SMIC */
+ case IPMI_DMI_TYPE_SMIC:
info->si_type = SI_SMIC;
break;
- case 0x03: /* BT */
+ case IPMI_DMI_TYPE_BT:
info->si_type = SI_BT;
break;
default:
kfree(info);
- return;
+ return -EINVAL;
}
- switch (ipmi_data->addr_space) {
- case IPMI_MEM_ADDR_SPACE:
- info->io_setup = mem_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
- break;
-
- case IPMI_IO_ADDR_SPACE:
- info->io_setup = port_setup;
- info->io.addr_type = IPMI_IO_ADDR_SPACE;
- break;
-
- default:
- kfree(info);
- pr_warn(PFX "Unknown SMBIOS I/O Address type: %d\n",
- ipmi_data->addr_space);
- return;
+ if (!ipmi_get_info_from_resources(pdev, info)) {
+ rv = -EINVAL;
+ goto err_free;
}
- info->io.addr_data = ipmi_data->base_addr;
- info->io.regspacing = ipmi_data->offset;
- if (!info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
- info->io.regsize = DEFAULT_REGSIZE;
- info->io.regshift = 0;
-
- info->slave_addr = ipmi_data->slave_addr;
+ rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr);
+ if (rv) {
+ dev_warn(&pdev->dev, "device has no slave-addr property");
+ info->slave_addr = 0x20;
+ } else {
+ info->slave_addr = slave_addr;
+ }
- info->irq = ipmi_data->irq;
- if (info->irq)
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq > 0)
info->irq_setup = std_irq_setup;
+ else
+ info->irq = 0;
+
+ info->dev = &pdev->dev;
pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
(info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
if (add_smi(info))
kfree(info);
-}
-static void dmi_find_bmc(void)
-{
- const struct dmi_device *dev = NULL;
- struct dmi_ipmi_data data;
- int rv;
+ return 0;
- while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
- memset(&data, 0, sizeof(data));
- rv = decode_dmi((const struct dmi_header *) dev->device_data,
- &data);
- if (!rv)
- try_init_dmi(&data);
- }
+err_free:
+ kfree(info);
+ return rv;
+}
+#else
+static int dmi_ipmi_probe(struct platform_device *pdev)
+{
+ return -ENODEV;
}
#endif /* CONFIG_DMI */
#endif
#ifdef CONFIG_ACPI
+static int find_slave_address(struct smi_info *info, int slave_addr)
+{
+#ifdef CONFIG_IPMI_DMI_DECODE
+ if (!slave_addr) {
+ int type = -1;
+ u32 flags = IORESOURCE_IO;
+
+ switch (info->si_type) {
+ case SI_KCS:
+ type = IPMI_DMI_TYPE_KCS;
+ break;
+ case SI_BT:
+ type = IPMI_DMI_TYPE_BT;
+ break;
+ case SI_SMIC:
+ type = IPMI_DMI_TYPE_SMIC;
+ break;
+ }
+
+ if (info->io.addr_type == IPMI_MEM_ADDR_SPACE)
+ flags = IORESOURCE_MEM;
+
+ slave_addr = ipmi_dmi_get_slave_addr(type, flags,
+ info->io.addr_data);
+ }
+#endif
+
+ return slave_addr;
+}
+
static int acpi_ipmi_probe(struct platform_device *dev)
{
struct smi_info *info;
- struct resource *res, *res_second;
acpi_handle handle;
acpi_status status;
unsigned long long tmp;
+ struct resource *res;
int rv = -EINVAL;
if (!si_tryacpi)
- return 0;
+ return -ENODEV;
handle = ACPI_HANDLE(&dev->dev);
if (!handle)
goto err_free;
}
- res = platform_get_resource(dev, IORESOURCE_IO, 0);
- if (res) {
- info->io_setup = port_setup;
- info->io.addr_type = IPMI_IO_ADDR_SPACE;
- } else {
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (res) {
- info->io_setup = mem_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
- }
- }
+ res = ipmi_get_info_from_resources(dev, info);
if (!res) {
- dev_err(&dev->dev, "no I/O or memory address\n");
+ rv = -EINVAL;
goto err_free;
}
- info->io.addr_data = res->start;
-
- info->io.regspacing = DEFAULT_REGSPACING;
- res_second = platform_get_resource(dev,
- (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
- IORESOURCE_IO : IORESOURCE_MEM,
- 1);
- if (res_second) {
- if (res_second->start > info->io.addr_data)
- info->io.regspacing =
- res_second->start - info->io.addr_data;
- }
- info->io.regsize = DEFAULT_REGSIZE;
- info->io.regshift = 0;
/* If _GPE exists, use it; otherwise use standard interrupts */
status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
}
}
+ info->slave_addr = find_slave_address(info, info->slave_addr);
+
info->dev = &dev->dev;
platform_set_drvdata(dev, info);
if (of_ipmi_probe(dev) == 0)
return 0;
- return acpi_ipmi_probe(dev);
+ if (acpi_ipmi_probe(dev) == 0)
+ return 0;
+
+ return dmi_ipmi_probe(dev);
}
static int ipmi_remove(struct platform_device *dev)
}
#endif
-#ifdef CONFIG_DMI
- if (si_trydmi)
- dmi_find_bmc();
-#endif
-
#ifdef CONFIG_ACPI
if (si_tryacpi)
spmi_find_bmc();
}
module_exit(cleanup_ipmi_si);
+MODULE_ALIAS("platform:dmi-ipmi-si");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
#include <linux/acpi.h>
#include <linux/ctype.h>
#include <linux/time64.h>
+#include "ipmi_dmi.h"
#define PFX "ipmi_ssif: "
#define DEVICE_NAME "ipmi_ssif"
int slave_addr;
enum ipmi_addr_src addr_src;
union ipmi_smi_info_union addr_info;
+ struct device *dev;
+ struct i2c_client *client;
struct mutex clients_mutex;
struct list_head clients;
static int ssif_remove(struct i2c_client *client)
{
struct ssif_info *ssif_info = i2c_get_clientdata(client);
+ struct ssif_addr_info *addr_info;
int rv;
if (!ssif_info)
kthread_stop(ssif_info->thread);
}
+ list_for_each_entry(addr_info, &ssif_infos, link) {
+ if (addr_info->client == client) {
+ addr_info->client = NULL;
+ break;
+ }
+ }
+
/*
* No message can be outstanding now, we have removed the
* upper layer and it permitted us to do so.
static int find_slave_address(struct i2c_client *client, int slave_addr)
{
- struct ssif_addr_info *info;
-
- if (slave_addr)
- return slave_addr;
-
- /*
- * Came in without a slave address, search around to see if
- * the other sources have a slave address. This lets us pick
- * up an SMBIOS slave address when using ACPI.
- */
- list_for_each_entry(info, &ssif_infos, link) {
- if (info->binfo.addr != client->addr)
- continue;
- if (info->adapter_name && strcmp_nospace(info->adapter_name,
- client->adapter->name))
- continue;
- if (info->slave_addr) {
- slave_addr = info->slave_addr;
- break;
- }
- }
+#ifdef CONFIG_IPMI_DMI_DECODE
+ if (!slave_addr)
+ slave_addr = ipmi_dmi_get_slave_addr(
+ IPMI_DMI_TYPE_SSIF,
+ i2c_adapter_id(client->adapter),
+ client->addr);
+#endif
return slave_addr;
}
u8 slave_addr = 0;
struct ssif_addr_info *addr_info = NULL;
-
resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
if (!resp)
return -ENOMEM;
ssif_info->addr_source = addr_info->addr_src;
ssif_info->ssif_debug = addr_info->debug;
ssif_info->addr_info = addr_info->addr_info;
+ addr_info->client = client;
slave_addr = addr_info->slave_addr;
}
}
}
out:
- if (rv)
+ if (rv) {
+ /*
+ * Note that if addr_info->client is assigned, we
+ * leave it. The i2c client hangs around even if we
+ * return a failure here, and the failure here is not
+ * propagated back to the i2c code. This seems to be
+ * design intent, strange as it may be. But if we
+ * don't leave it, ssif_platform_remove will not remove
+ * the client like it should.
+ */
+ dev_err(&client->dev, "Unable to start IPMI SSIF: %d\n", rv);
kfree(ssif_info);
+ }
kfree(resp);
return rv;
static int new_ssif_client(int addr, char *adapter_name,
int debug, int slave_addr,
- enum ipmi_addr_src addr_src)
+ enum ipmi_addr_src addr_src,
+ struct device *dev)
{
struct ssif_addr_info *addr_info;
int rv = 0;
addr_info->debug = debug;
addr_info->slave_addr = slave_addr;
addr_info->addr_src = addr_src;
+ addr_info->dev = dev;
+
+ dev_set_drvdata(dev, addr_info);
list_add_tail(&addr_info->link, &ssif_infos);
myaddr = spmi->addr.address & 0x7f;
- return new_ssif_client(myaddr, NULL, 0, 0, SI_SPMI);
+ return new_ssif_client(myaddr, NULL, 0, 0, SI_SPMI, NULL);
}
static void spmi_find_bmc(void)
#endif
#ifdef CONFIG_DMI
-static int decode_dmi(const struct dmi_device *dmi_dev)
+static int dmi_ipmi_probe(struct platform_device *pdev)
{
- struct dmi_header *dm = dmi_dev->device_data;
- u8 *data = (u8 *) dm;
- u8 len = dm->length;
- unsigned short myaddr;
- int slave_addr;
+ u8 type, slave_addr = 0;
+ u16 i2c_addr;
+ int rv;
- if (num_addrs >= MAX_SSIF_BMCS)
- return -1;
+ if (!ssif_trydmi)
+ return -ENODEV;
- if (len < 9)
- return -1;
+ rv = device_property_read_u8(&pdev->dev, "ipmi-type", &type);
+ if (rv)
+ return -ENODEV;
- if (data[0x04] != 4) /* Not SSIF */
- return -1;
+ if (type != IPMI_DMI_TYPE_SSIF)
+ return -ENODEV;
- if ((data[8] >> 1) == 0) {
- /*
- * Some broken systems put the I2C address in
- * the slave address field. We try to
- * accommodate them here.
- */
- myaddr = data[6] >> 1;
- slave_addr = 0;
- } else {
- myaddr = data[8] >> 1;
- slave_addr = data[6];
+ rv = device_property_read_u16(&pdev->dev, "i2c-addr", &i2c_addr);
+ if (rv) {
+ dev_warn(&pdev->dev, PFX "No i2c-addr property\n");
+ return -ENODEV;
}
- return new_ssif_client(myaddr, NULL, 0, slave_addr, SI_SMBIOS);
-}
-
-static void dmi_iterator(void)
-{
- const struct dmi_device *dev = NULL;
+ rv = device_property_read_u8(&pdev->dev, "slave-addr", &slave_addr);
+ if (rv)
+ dev_warn(&pdev->dev, "device has no slave-addr property");
- while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev)))
- decode_dmi(dev);
+ return new_ssif_client(i2c_addr, NULL, 0,
+ slave_addr, SI_SMBIOS, &pdev->dev);
}
#else
-static void dmi_iterator(void) { }
+static int dmi_ipmi_probe(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
#endif
static const struct i2c_device_id ssif_id[] = {
.detect = ssif_detect
};
+static int ssif_platform_probe(struct platform_device *dev)
+{
+ return dmi_ipmi_probe(dev);
+}
+
+static int ssif_platform_remove(struct platform_device *dev)
+{
+ struct ssif_addr_info *addr_info = dev_get_drvdata(&dev->dev);
+
+ if (!addr_info)
+ return 0;
+
+ mutex_lock(&ssif_infos_mutex);
+ if (addr_info->client)
+ i2c_unregister_device(addr_info->client);
+
+ list_del(&addr_info->link);
+ kfree(addr_info);
+ mutex_unlock(&ssif_infos_mutex);
+ return 0;
+}
+
+static struct platform_driver ipmi_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ },
+ .probe = ssif_platform_probe,
+ .remove = ssif_platform_remove,
+};
+
static int init_ipmi_ssif(void)
{
int i;
for (i = 0; i < num_addrs; i++) {
rv = new_ssif_client(addr[i], adapter_name[i],
dbg[i], slave_addrs[i],
- SI_HARDCODED);
+ SI_HARDCODED, NULL);
if (rv)
pr_err(PFX
"Couldn't add hardcoded device at addr 0x%x\n",
if (ssif_tryacpi)
ssif_i2c_driver.driver.acpi_match_table =
ACPI_PTR(ssif_acpi_match);
- if (ssif_trydmi)
- dmi_iterator();
+
if (ssif_tryacpi)
spmi_find_bmc();
+ if (ssif_trydmi) {
+ rv = platform_driver_register(&ipmi_driver);
+ if (rv)
+ pr_err(PFX "Unable to register driver: %d\n", rv);
+ }
+
ssif_i2c_driver.address_list = ssif_address_list();
rv = i2c_add_driver(&ssif_i2c_driver);
i2c_del_driver(&ssif_i2c_driver);
+ platform_driver_unregister(&ipmi_driver);
+
free_ssif_clients();
}
module_exit(cleanup_ipmi_ssif);
+MODULE_ALIAS("platform:dmi-ipmi-ssif");
MODULE_AUTHOR("Todd C Davis <todd.c.davis@intel.com>, Corey Minyard <minyard@acm.org>");
MODULE_DESCRIPTION("IPMI driver for management controllers on a SMBus");
MODULE_LICENSE("GPL");
projects / mirror_ubuntu-artful-kernel.git / commitdiff