Currently, on x86-64, perf uses LFENCE and MFENCE (rmb() and mb(),
respectively) when processing events from the perf ring buffer which
is unnecessarily expensive as we can do more lightweight in particular
given this is critical fast-path in perf.
According to Peter rmb()/mb() were added back then via
a94d342b9cb0
("tools/perf: Add required memory barriers") at a time where kernel
still supported chips that needed it, but nowadays support for these
has been ditched completely, therefore we can fix them up as well.
While for x86-64, replacing rmb() and mb() with smp_*() variants would
result in just a compiler barrier for the former and LOCK + ADD for
the latter (__sync_synchronize() uses slower MFENCE by the way), Peter
suggested we can use smp_{load_acquire,store_release}() instead for
architectures where its implementation doesn't resolve in slower smp_mb().
Thus, e.g. in x86-64 we would be able to avoid CPU barrier entirely due
to TSO. For architectures where the latter needs to use smp_mb() e.g.
on arm, we stick to cheaper smp_rmb() variant for fetching the head.
This work adds helpers ring_buffer_read_head() and ring_buffer_write_tail()
for tools infrastructure that either switches to smp_load_acquire() for
architectures where it is cheaper or uses READ_ONCE() + smp_rmb() barrier
for those where it's not in order to fetch the data_head from the perf
control page, and it uses smp_store_release() to write the data_tail.
Latter is smp_mb() + WRITE_ONCE() combination or a cheaper variant if
architecture allows for it. Those that rely on smp_rmb() and smp_mb() can
further improve performance in a follow up step by implementing the two
under tools/arch/*/include/asm/barrier.h such that they don't have to
fallback to rmb() and mb() in tools/include/asm/barrier.h.
Switch perf to use ring_buffer_read_head() and ring_buffer_write_tail()
so it can make use of the optimizations. Later, we convert libbpf as
well to use the same helpers.
Side note [0]: the topic has been raised of whether one could simply use
the C11 gcc builtins [1] for the smp_load_acquire() and smp_store_release()
instead:
__atomic_load_n(ptr, __ATOMIC_ACQUIRE);
__atomic_store_n(ptr, val, __ATOMIC_RELEASE);
Kernel and (presumably) tooling shipped along with the kernel has a
minimum requirement of being able to build with gcc-4.6 and the latter
does not have C11 builtins. While generally the C11 memory models don't
align with the kernel's, the C11 load-acquire and store-release alone
/could/ suffice, however. Issue is that this is implementation dependent
on how the load-acquire and store-release is done by the compiler and
the mapping of supported compilers must align to be compatible with the
kernel's implementation, and thus needs to be verified/tracked on a
case by case basis whether they match (unless an architecture uses them
also from kernel side). The implementations for smp_load_acquire() and
smp_store_release() in this patch have been adapted from the kernel side
ones to have a concrete and compatible mapping in place.
[0] http://patchwork.ozlabs.org/patch/985422/
[1] https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
#define wmb() asm volatile("dmb ishst" ::: "memory")
#define rmb() asm volatile("dmb ishld" ::: "memory")
+#define smp_store_release(p, v) \
+do { \
+ union { typeof(*p) __val; char __c[1]; } __u = \
+ { .__val = (__force typeof(*p)) (v) }; \
+ \
+ switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("stlrb %w1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u8 *)__u.__c) \
+ : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("stlrh %w1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u16 *)__u.__c) \
+ : "memory"); \
+ break; \
+ case 4: \
+ asm volatile ("stlr %w1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u32 *)__u.__c) \
+ : "memory"); \
+ break; \
+ case 8: \
+ asm volatile ("stlr %1, %0" \
+ : "=Q" (*p) \
+ : "r" (*(__u64 *)__u.__c) \
+ : "memory"); \
+ break; \
+ default: \
+ /* Only to shut up gcc ... */ \
+ mb(); \
+ break; \
+ } \
+} while (0)
+
+#define smp_load_acquire(p) \
+({ \
+ union { typeof(*p) __val; char __c[1]; } __u; \
+ \
+ switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("ldarb %w0, %1" \
+ : "=r" (*(__u8 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("ldarh %w0, %1" \
+ : "=r" (*(__u16 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ case 4: \
+ asm volatile ("ldar %w0, %1" \
+ : "=r" (*(__u32 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ case 8: \
+ asm volatile ("ldar %0, %1" \
+ : "=r" (*(__u64 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
+ break; \
+ default: \
+ /* Only to shut up gcc ... */ \
+ mb(); \
+ break; \
+ } \
+ __u.__val; \
+})
+
#endif /* _TOOLS_LINUX_ASM_AARCH64_BARRIER_H */
#define rmb() mb()
#define wmb() mb()
+#define smp_store_release(p, v) \
+do { \
+ barrier(); \
+ WRITE_ONCE(*p, v); \
+} while (0)
+
+#define smp_load_acquire(p) \
+({ \
+ typeof(*p) ___p1 = READ_ONCE(*p); \
+ barrier(); \
+ ___p1; \
+})
+
#endif /* _TOOLS_LINUX_ASM_IA64_BARRIER_H */
#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
#define wmb() __asm__ __volatile__ ("sync" : : : "memory")
+#if defined(__powerpc64__)
+#define smp_lwsync() __asm__ __volatile__ ("lwsync" : : : "memory")
+
+#define smp_store_release(p, v) \
+do { \
+ smp_lwsync(); \
+ WRITE_ONCE(*p, v); \
+} while (0)
+
+#define smp_load_acquire(p) \
+({ \
+ typeof(*p) ___p1 = READ_ONCE(*p); \
+ smp_lwsync(); \
+ ___p1; \
+})
+#endif /* defined(__powerpc64__) */
#endif /* _TOOLS_LINUX_ASM_POWERPC_BARRIER_H */
#define rmb() mb()
#define wmb() mb()
+#define smp_store_release(p, v) \
+do { \
+ barrier(); \
+ WRITE_ONCE(*p, v); \
+} while (0)
+
+#define smp_load_acquire(p) \
+({ \
+ typeof(*p) ___p1 = READ_ONCE(*p); \
+ barrier(); \
+ ___p1; \
+})
+
#endif /* __TOOLS_LIB_ASM_BARRIER_H */
#define rmb() __asm__ __volatile__("":::"memory")
#define wmb() __asm__ __volatile__("":::"memory")
+#define smp_store_release(p, v) \
+do { \
+ barrier(); \
+ WRITE_ONCE(*p, v); \
+} while (0)
+
+#define smp_load_acquire(p) \
+({ \
+ typeof(*p) ___p1 = READ_ONCE(*p); \
+ barrier(); \
+ ___p1; \
+})
+
#endif /* !(__TOOLS_LINUX_SPARC64_BARRIER_H) */
#define wmb() asm volatile("sfence" ::: "memory")
#endif
+#if defined(__x86_64__)
+#define smp_store_release(p, v) \
+do { \
+ barrier(); \
+ WRITE_ONCE(*p, v); \
+} while (0)
+
+#define smp_load_acquire(p) \
+({ \
+ typeof(*p) ___p1 = READ_ONCE(*p); \
+ barrier(); \
+ ___p1; \
+})
+#endif /* defined(__x86_64__) */
#endif /* _TOOLS_LINUX_ASM_X86_BARRIER_H */
/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/compiler.h>
#if defined(__i386__) || defined(__x86_64__)
#include "../../arch/x86/include/asm/barrier.h"
#elif defined(__arm__)
#else
#include <asm-generic/barrier.h>
#endif
+
+/*
+ * Generic fallback smp_*() definitions for archs that haven't
+ * been updated yet.
+ */
+
+#ifndef smp_rmb
+# define smp_rmb() rmb()
+#endif
+
+#ifndef smp_wmb
+# define smp_wmb() wmb()
+#endif
+
+#ifndef smp_mb
+# define smp_mb() mb()
+#endif
+
+#ifndef smp_store_release
+# define smp_store_release(p, v) \
+do { \
+ smp_mb(); \
+ WRITE_ONCE(*p, v); \
+} while (0)
+#endif
+
+#ifndef smp_load_acquire
+# define smp_load_acquire(p) \
+({ \
+ typeof(*p) ___p1 = READ_ONCE(*p); \
+ smp_mb(); \
+ ___p1; \
+})
+#endif
--- /dev/null
+#ifndef _TOOLS_LINUX_RING_BUFFER_H_
+#define _TOOLS_LINUX_RING_BUFFER_H_
+
+#include <asm/barrier.h>
+
+/*
+ * Contract with kernel for walking the perf ring buffer from
+ * user space requires the following barrier pairing (quote
+ * from kernel/events/ring_buffer.c):
+ *
+ * Since the mmap() consumer (userspace) can run on a
+ * different CPU:
+ *
+ * kernel user
+ *
+ * if (LOAD ->data_tail) { LOAD ->data_head
+ * (A) smp_rmb() (C)
+ * STORE $data LOAD $data
+ * smp_wmb() (B) smp_mb() (D)
+ * STORE ->data_head STORE ->data_tail
+ * }
+ *
+ * Where A pairs with D, and B pairs with C.
+ *
+ * In our case A is a control dependency that separates the
+ * load of the ->data_tail and the stores of $data. In case
+ * ->data_tail indicates there is no room in the buffer to
+ * store $data we do not.
+ *
+ * D needs to be a full barrier since it separates the data
+ * READ from the tail WRITE.
+ *
+ * For B a WMB is sufficient since it separates two WRITEs,
+ * and for C an RMB is sufficient since it separates two READs.
+ *
+ * Note, instead of B, C, D we could also use smp_store_release()
+ * in B and D as well as smp_load_acquire() in C.
+ *
+ * However, this optimization does not make sense for all kernel
+ * supported architectures since for a fair number it would
+ * resolve into READ_ONCE() + smp_mb() pair for smp_load_acquire(),
+ * and smp_mb() + WRITE_ONCE() pair for smp_store_release().
+ *
+ * Thus for those smp_wmb() in B and smp_rmb() in C would still
+ * be less expensive. For the case of D this has either the same
+ * cost or is less expensive, for example, due to TSO x86 can
+ * avoid the CPU barrier entirely.
+ */
+
+static inline u64 ring_buffer_read_head(struct perf_event_mmap_page *base)
+{
+/*
+ * Architectures where smp_load_acquire() does not fallback to
+ * READ_ONCE() + smp_mb() pair.
+ */
+#if defined(__x86_64__) || defined(__aarch64__) || defined(__powerpc64__) || \
+ defined(__ia64__) || defined(__sparc__) && defined(__arch64__)
+ return smp_load_acquire(&base->data_head);
+#else
+ u64 head = READ_ONCE(base->data_head);
+
+ smp_rmb();
+ return head;
+#endif
+}
+
+static inline void ring_buffer_write_tail(struct perf_event_mmap_page *base,
+ u64 tail)
+{
+ smp_store_release(&base->data_tail, tail);
+}
+
+#endif /* _TOOLS_LINUX_RING_BUFFER_H_ */
#include <linux/compiler.h>
#include <linux/refcount.h>
#include <linux/types.h>
-#include <asm/barrier.h>
+#include <linux/ring_buffer.h>
#include <stdbool.h>
#include "auxtrace.h"
#include "event.h"
static inline u64 perf_mmap__read_head(struct perf_mmap *mm)
{
- struct perf_event_mmap_page *pc = mm->base;
- u64 head = READ_ONCE(pc->data_head);
- rmb();
- return head;
+ return ring_buffer_read_head(mm->base);
}
static inline void perf_mmap__write_tail(struct perf_mmap *md, u64 tail)
{
- struct perf_event_mmap_page *pc = md->base;
-
- /*
- * ensure all reads are done before we write the tail out.
- */
- mb();
- pc->data_tail = tail;
+ ring_buffer_write_tail(md->base, tail);
}
union perf_event *perf_mmap__read_forward(struct perf_mmap *map);
projects / mirror_ubuntu-eoan-kernel.git / commitdiff