i2c: stu300: make bindings file name match the driver

If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
deleted file mode 100644 (file)
index bd81a48..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-ST Microelectronics DDC I2C
-
-Required properties :
-- compatible : Must be "st,ddci2c"
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-
-Examples :
-

diff --git a/Documentation/devicetree/bindings/i2c/i2c-stu300.txt b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
new file mode 100644 (file)
index 0000000..bd81a48
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
@@ -0,0 +1,15 @@
+ST Microelectronics DDC I2C
+
+Required properties :
+- compatible : Must be "st,ddci2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Examples :
+