int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
{
struct b53_device *dev = ds->priv;
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = ds->ports[port].cpu_dp->index;
u16 pvlan, reg;
unsigned int i;
{
struct b53_device *dev = ds->priv;
struct b53_vlan *vl = &dev->vlans[0];
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = ds->ports[port].cpu_dp->index;
unsigned int i;
u16 pvlan, reg, pvid;
static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = ds->dst->cpu_dp->netdev;
+ struct net_device *p = ds->ports[port].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_wolinfo pwol;
static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = ds->dst->cpu_dp->netdev;
+ struct net_device *p = ds->ports[port].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = ds->ports[port].cpu_dp->index;
struct ethtool_wolinfo pwol;
p->ethtool_ops->get_wol(p, &pwol);
struct device_node *dn;
struct mt7530_dummy_poll p;
- /* The parent node of cpu_dp->netdev which holds the common system
+ /* The parent node of master netdev which holds the common system
* controller also is the container for two GMACs nodes representing
* as two netdev instances.
*/
- dn = ds->dst->cpu_dp->netdev->dev.of_node->parent;
+ dn = ds->ports[MT7530_CPU_PORT].netdev->dev.of_node->parent;
priv->ethernet = syscon_node_to_regmap(dn);
if (IS_ERR(priv->ethernet))
return PTR_ERR(priv->ethernet);
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
(dsa_is_cpu_port(ds, p) ?
ds->enabled_port_mask :
- BIT(ds->dst->cpu_dp->index)));
+ BIT(ds->ports[p].cpu_dp->index)));
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
pr_warn("regmap initialization failed");
/* Initialize CPU port pad mode (xMII type, delays...) */
- phy_mode = of_get_phy_mode(ds->dst->cpu_dp->dn);
+ phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
if (phy_mode < 0) {
pr_err("Can't find phy-mode for master device\n");
return phy_mode;