]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
Input: elantech - fix crc_enabled for Fujitsu H730
authorUlrik De Bie <ulrik.debie-os@e2big.org>
Sat, 8 Nov 2014 07:57:34 +0000 (23:57 -0800)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Sat, 8 Nov 2014 08:26:45 +0000 (00:26 -0800)
The Fujitsu H730 does not work with crc_enabled = 0, even though the
crc_enabled bit in the firmware version indicated it would. When switching
this value to crc_enabled to 1, the touchpad works. This patch uses DMI to
detect H730.

Reported-by: Stefan Valouch <stefan@valouch.com>
Tested-by: Stefan Valouch <stefan@valouch.com>
Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
drivers/input/mouse/elantech.c

index 53ddff91ab2e3c461c0e35e8668fb94603e12627..ce699eba9adc096842d11e34ff4c1a56c661ec98 100644 (file)
@@ -1450,6 +1450,22 @@ static int elantech_reconnect(struct psmouse *psmouse)
        return 0;
 }
 
+/*
+ * Some hw_version 4 models do not work with crc_disabled
+ */
+static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+       {
+               /* Fujitsu H730 does not work with crc_enabled == 0 */
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
+               },
+       },
+#endif
+       { }
+};
+
 /*
  * Some hw_version 3 models go into error state when we try to set
  * bit 3 and/or bit 1 of r10.
@@ -1525,7 +1541,8 @@ static int elantech_set_properties(struct elantech_data *etd)
         * The signatures of v3 and v4 packets change depending on the
         * value of this hardware flag.
         */
-       etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000);
+       etd->crc_enabled = (etd->fw_version & 0x4000) == 0x4000 ||
+                          dmi_check_system(elantech_dmi_force_crc_enabled);
 
        /* Enable real hardware resolution on hw_version 3 ? */
        etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);