--- /dev/null
+/*
+ * This file contains the 64-bit "server" PowerPC variant
+ * of the low level exception handling including exception
+ * vectors, exception return, part of the slb and stab
+ * handling and other fixed offset specific things.
+ *
+ * This file is meant to be #included from head_64.S due to
+ * position dependant assembly.
+ *
+ * Most of this originates from head_64.S and thus has the same
+ * copyright history.
+ *
+ */
+
+/*
+ * We layout physical memory as follows:
+ * 0x0000 - 0x00ff : Secondary processor spin code
+ * 0x0100 - 0x2fff : pSeries Interrupt prologs
+ * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x7000 - 0x7fff : FWNMI data area
+ * 0x8000 - : Early init and support code
+ */
+
+
+/*
+ * SPRG Usage
+ *
+ * Register Definition
+ *
+ * SPRG0 reserved for hypervisor
+ * SPRG1 temp - used to save gpr
+ * SPRG2 temp - used to save gpr
+ * SPRG3 virt addr of paca
+ */
+
+/*
+ * This is the start of the interrupt handlers for pSeries
+ * This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
+ */
+ . = 0x100
+ .globl __start_interrupts
+__start_interrupts:
+
+ STD_EXCEPTION_PSERIES(0x100, system_reset)
+
+ . = 0x200
+_machine_check_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+ . = 0x300
+ .globl data_access_pSeries
+data_access_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13
+BEGIN_FTR_SECTION
+ mtspr SPRN_SPRG2,r12
+ mfspr r13,SPRN_DAR
+ mfspr r12,SPRN_DSISR
+ srdi r13,r13,60
+ rlwimi r13,r12,16,0x20
+ mfcr r12
+ cmpwi r13,0x2c
+ beq do_stab_bolted_pSeries
+ mtcrf 0x80,r12
+ mfspr r12,SPRN_SPRG2
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+
+ . = 0x380
+ .globl data_access_slb_pSeries
+data_access_slb_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13
+ mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_DAR
+ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ mfcr r9
+#ifdef __DISABLED__
+ /* Keep that around for when we re-implement dynamic VSIDs */
+ cmpdi r3,0
+ bge slb_miss_user_pseries
+#endif /* __DISABLED__ */
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ /*
+ * We can't just use a direct branch to .slb_miss_realmode
+ * because the distance from here to there depends on where
+ * the kernel ends up being put.
+ */
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ STD_EXCEPTION_PSERIES(0x400, instruction_access)
+
+ . = 0x480
+ .globl instruction_access_slb_pSeries
+instruction_access_slb_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13
+ mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
+ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ mfcr r9
+#ifdef __DISABLED__
+ /* Keep that around for when we re-implement dynamic VSIDs */
+ cmpdi r3,0
+ bge slb_miss_user_pseries
+#endif /* __DISABLED__ */
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
+ STD_EXCEPTION_PSERIES(0x600, alignment)
+ STD_EXCEPTION_PSERIES(0x700, program_check)
+ STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
+ MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
+ STD_EXCEPTION_PSERIES(0xa00, trap_0a)
+ STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+
+ . = 0xc00
+ .globl system_call_pSeries
+system_call_pSeries:
+ HMT_MEDIUM
+BEGIN_FTR_SECTION
+ cmpdi r0,0x1ebe
+ beq- 1f
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
+ mr r9,r13
+ mfspr r13,SPRN_SPRG3
+ mfspr r11,SPRN_SRR0
+ ld r12,PACAKBASE(r13)
+ ld r10,PACAKMSR(r13)
+ LOAD_HANDLER(r12, system_call_entry)
+ mtspr SPRN_SRR0,r12
+ mfspr r12,SPRN_SRR1
+ mtspr SPRN_SRR1,r10
+ rfid
+ b . /* prevent speculative execution */
+
+/* Fast LE/BE switch system call */
+1: mfspr r12,SPRN_SRR1
+ xori r12,r12,MSR_LE
+ mtspr SPRN_SRR1,r12
+ rfid /* return to userspace */
+ b .
+
+ STD_EXCEPTION_PSERIES(0xd00, single_step)
+ STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+
+ /* We need to deal with the Altivec unavailable exception
+ * here which is at 0xf20, thus in the middle of the
+ * prolog code of the PerformanceMonitor one. A little
+ * trickery is thus necessary
+ */
+ . = 0xf00
+ b performance_monitor_pSeries
+
+ . = 0xf20
+ b altivec_unavailable_pSeries
+
+ . = 0xf40
+ b vsx_unavailable_pSeries
+
+#ifdef CONFIG_CBE_RAS
+ HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+ STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+#ifdef CONFIG_CBE_RAS
+ HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+#endif /* CONFIG_CBE_RAS */
+ STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+ HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+ . = 0x3000
+
+/*** pSeries interrupt support ***/
+
+ /* moved from 0xf00 */
+ STD_EXCEPTION_PSERIES(., performance_monitor)
+ STD_EXCEPTION_PSERIES(., altivec_unavailable)
+ STD_EXCEPTION_PSERIES(., vsx_unavailable)
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt:
+ stb r10,PACAHARDIRQEN(r13)
+ mtcrf 0x80,r9
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ mfspr r10,SPRN_SRR1
+ rldicl r10,r10,48,1 /* clear MSR_EE */
+ rotldi r10,r10,16
+ mtspr SPRN_SRR1,r10
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ mfspr r13,SPRN_SPRG1
+ rfid
+ b .
+
+ .align 7
+do_stab_bolted_pSeries:
+ mtcrf 0x80,r12
+ mfspr r12,SPRN_SPRG2
+ EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Vectors for the FWNMI option. Share common code.
+ */
+ .globl system_reset_fwnmi
+ .align 7
+system_reset_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+
+ .globl machine_check_fwnmi
+ .align 7
+machine_check_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef __DISABLED__
+/*
+ * This is used for when the SLB miss handler has to go virtual,
+ * which doesn't happen for now anymore but will once we re-implement
+ * dynamic VSIDs for shared page tables
+ */
+slb_miss_user_pseries:
+ std r10,PACA_EXGEN+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfspr r10,SPRG1
+ ld r11,PACA_EXSLB+EX_R9(r13)
+ ld r12,PACA_EXSLB+EX_R3(r13)
+ std r10,PACA_EXGEN+EX_R13(r13)
+ std r11,PACA_EXGEN+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R3(r13)
+ clrrdi r12,r13,32
+ mfmsr r10
+ mfspr r11,SRR0 /* save SRR0 */
+ ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
+ ori r10,r10,MSR_IR|MSR_DR|MSR_RI
+ mtspr SRR0,r12
+ mfspr r12,SRR1 /* and SRR1 */
+ mtspr SRR1,r10
+ rfid
+ b . /* prevent spec. execution */
+#endif /* __DISABLED__ */
+
+ .align 7
+ .globl __end_interrupts
+__end_interrupts:
+
+/*
+ * Code from here down to __end_handlers is invoked from the
+ * exception prologs above. Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an addi instruction, these handlers must be in
+ * the first 32k of the kernel image.
+ */
+
+/*** Common interrupt handlers ***/
+
+ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+
+ /*
+ * Machine check is different because we use a different
+ * save area: PACA_EXMC instead of PACA_EXGEN.
+ */
+ .align 7
+ .globl machine_check_common
+machine_check_common:
+ EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+ FINISH_NAP
+ DISABLE_INTS
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .machine_check_exception
+ b .ret_from_except
+
+ STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
+ STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
+ STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+ STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
+ STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
+#ifdef CONFIG_ALTIVEC
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+#else
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+#endif
+#ifdef CONFIG_CBE_RAS
+ STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
+ STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
+ STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+#endif /* CONFIG_CBE_RAS */
+
+ .align 7
+system_call_entry:
+ b system_call_common
+
+/*
+ * Here we have detected that the kernel stack pointer is bad.
+ * R9 contains the saved CR, r13 points to the paca,
+ * r10 contains the (bad) kernel stack pointer,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * We switch to using an emergency stack, save the registers there,
+ * and call kernel_bad_stack(), which panics.
+ */
+bad_stack:
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,64+INT_FRAME_SIZE
+ std r9,_CCR(r1)
+ std r10,GPR1(r1)
+ std r11,_NIP(r1)
+ std r12,_MSR(r1)
+ mfspr r11,SPRN_DAR
+ mfspr r12,SPRN_DSISR
+ std r11,_DAR(r1)
+ std r12,_DSISR(r1)
+ mflr r10
+ mfctr r11
+ mfxer r12
+ std r10,_LINK(r1)
+ std r11,_CTR(r1)
+ std r12,_XER(r1)
+ SAVE_GPR(0,r1)
+ SAVE_GPR(2,r1)
+ SAVE_4GPRS(3,r1)
+ SAVE_2GPRS(7,r1)
+ SAVE_10GPRS(12,r1)
+ SAVE_10GPRS(22,r1)
+ lhz r12,PACA_TRAP_SAVE(r13)
+ std r12,_TRAP(r1)
+ addi r11,r1,INT_FRAME_SIZE
+ std r11,0(r1)
+ li r12,0
+ std r12,0(r11)
+ ld r2,PACATOC(r13)
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .kernel_bad_stack
+ b 1b
+
+/*
+ * Here r13 points to the paca, r9 contains the saved CR,
+ * SRR0 and SRR1 are saved in r11 and r12,
+ * r9 - r13 are saved in paca->exgen.
+ */
+ .align 7
+ .globl data_access_common
+data_access_common:
+ mfspr r10,SPRN_DAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,SPRN_DSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
+ ld r3,PACA_EXGEN+EX_DAR(r13)
+ lwz r4,PACA_EXGEN+EX_DSISR(r13)
+ li r5,0x300
+ b .do_hash_page /* Try to handle as hpte fault */
+
+ .align 7
+ .globl instruction_access_common
+instruction_access_common:
+ EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
+ ld r3,_NIP(r1)
+ andis. r4,r12,0x5820
+ li r5,0x400
+ b .do_hash_page /* Try to handle as hpte fault */
+
+/*
+ * Here is the common SLB miss user that is used when going to virtual
+ * mode for SLB misses, that is currently not used
+ */
+#ifdef __DISABLED__
+ .align 7
+ .globl slb_miss_user_common
+slb_miss_user_common:
+ mflr r10
+ std r3,PACA_EXGEN+EX_DAR(r13)
+ stw r9,PACA_EXGEN+EX_CCR(r13)
+ std r10,PACA_EXGEN+EX_LR(r13)
+ std r11,PACA_EXGEN+EX_SRR0(r13)
+ bl .slb_allocate_user
+
+ ld r10,PACA_EXGEN+EX_LR(r13)
+ ld r3,PACA_EXGEN+EX_R3(r13)
+ lwz r9,PACA_EXGEN+EX_CCR(r13)
+ ld r11,PACA_EXGEN+EX_SRR0(r13)
+ mtlr r10
+ beq- slb_miss_fault
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- unrecov_user_slb
+ mfmsr r10
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+.machine pop
+
+ clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
+ mtmsrd r10,1
+
+ mtspr SRR0,r11
+ mtspr SRR1,r12
+
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ rfid
+ b .
+
+slb_miss_fault:
+ EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
+ ld r4,PACA_EXGEN+EX_DAR(r13)
+ li r5,0
+ std r4,_DAR(r1)
+ std r5,_DSISR(r1)
+ b handle_page_fault
+
+unrecov_user_slb:
+ EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+#endif /* __DISABLED__ */
+
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ ld r11,PACALPPACAPTR(r13)
+ ld r11,LPPACASRR0(r11) /* get SRR0 value */
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- 2f
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ mtspr SPRN_SRR0,r11
+ mtspr SPRN_SRR1,r12
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+2:
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ b unrecov_slb
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+ mfspr r11,SPRN_SRR0
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+ .align 7
+ .globl hardware_interrupt_common
+ .globl hardware_interrupt_entry
+hardware_interrupt_common:
+ EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+ FINISH_NAP
+hardware_interrupt_entry:
+ DISABLE_INTS
+BEGIN_FTR_SECTION
+ bl .ppc64_runlatch_on
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_IRQ
+ b .ret_from_except_lite
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
+ .align 7
+ .globl alignment_common
+alignment_common:
+ mfspr r10,SPRN_DAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,SPRN_DSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
+ ld r3,PACA_EXGEN+EX_DAR(r13)
+ lwz r4,PACA_EXGEN+EX_DSISR(r13)
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .alignment_exception
+ b .ret_from_except
+
+ .align 7
+ .globl program_check_common
+program_check_common:
+ EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .program_check_exception
+ b .ret_from_except
+
+ .align 7
+ .globl fp_unavailable_common
+fp_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
+ bne 1f /* if from user, just load it up */
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .kernel_fp_unavailable_exception
+ BUG_OPCODE
+1: bl .load_up_fpu
+ b fast_exception_return
+
+ .align 7
+ .globl altivec_unavailable_common
+altivec_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+ beq 1f
+ bl .load_up_altivec
+ b fast_exception_return
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .altivec_unavailable_exception
+ b .ret_from_except
+
+ .align 7
+ .globl vsx_unavailable_common
+vsx_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ bne .load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .vsx_unavailable_exception
+ b .ret_from_except
+
+ .align 7
+ .globl __end_handlers
+__end_handlers:
+
+/*
+ * Return from an exception with minimal checks.
+ * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
+ * If interrupts have been enabled, or anything has been
+ * done that might have changed the scheduling status of
+ * any task or sent any task a signal, you should use
+ * ret_from_except or ret_from_except_lite instead of this.
+ */
+fast_exc_return_irq: /* restores irq state too */
+ ld r3,SOFTE(r1)
+ TRACE_AND_RESTORE_IRQ(r3);
+ ld r12,_MSR(r1)
+ rldicl r4,r12,49,63 /* get MSR_EE to LSB */
+ stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
+ b 1f
+
+ .globl fast_exception_return
+fast_exception_return:
+ ld r12,_MSR(r1)
+1: ld r11,_NIP(r1)
+ andi. r3,r12,MSR_RI /* check if RI is set */
+ beq- unrecov_fer
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ andi. r3,r12,MSR_PR
+ beq 2f
+ ACCOUNT_CPU_USER_EXIT(r3, r4)
+2:
+#endif
+
+ ld r3,_CCR(r1)
+ ld r4,_LINK(r1)
+ ld r5,_CTR(r1)
+ ld r6,_XER(r1)
+ mtcr r3
+ mtlr r4
+ mtctr r5
+ mtxer r6
+ REST_GPR(0, r1)
+ REST_8GPRS(2, r1)
+
+ mfmsr r10
+ rldicl r10,r10,48,1 /* clear EE */
+ rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
+ mtmsrd r10,1
+
+ mtspr SPRN_SRR1,r12
+ mtspr SPRN_SRR0,r11
+ REST_4GPRS(10, r1)
+ ld r1,GPR1(r1)
+ rfid
+ b . /* prevent speculative execution */
+
+unrecov_fer:
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+
+/*
+ * Hash table stuff
+ */
+ .align 7
+_STATIC(do_hash_page)
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+
+ andis. r0,r4,0xa450 /* weird error? */
+ bne- handle_page_fault /* if not, try to insert a HPTE */
+BEGIN_FTR_SECTION
+ andis. r0,r4,0x0020 /* Is it a segment table fault? */
+ bne- do_ste_alloc /* If so handle it */
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+
+ /*
+ * On iSeries, we soft-disable interrupts here, then
+ * hard-enable interrupts so that the hash_page code can spin on
+ * the hash_table_lock without problems on a shared processor.
+ */
+ DISABLE_INTS
+
+ /*
+ * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
+ * and will clobber volatile registers when irq tracing is enabled
+ * so we need to reload them. It may be possible to be smarter here
+ * and move the irq tracing elsewhere but let's keep it simple for
+ * now
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ ld r3,_DAR(r1)
+ ld r4,_DSISR(r1)
+ ld r5,_TRAP(r1)
+ ld r12,_MSR(r1)
+ clrrdi r5,r5,4
+#endif /* CONFIG_TRACE_IRQFLAGS */
+ /*
+ * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
+ * accessing a userspace segment (even from the kernel). We assume
+ * kernel addresses always have the high bit set.
+ */
+ rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
+ rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
+ orc r0,r12,r0 /* MSR_PR | ~high_bit */
+ rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
+ ori r4,r4,1 /* add _PAGE_PRESENT */
+ rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
+
+ /*
+ * r3 contains the faulting address
+ * r4 contains the required access permissions
+ * r5 contains the trap number
+ *
+ * at return r3 = 0 for success
+ */
+ bl .hash_page /* build HPTE if possible */
+ cmpdi r3,0 /* see if hash_page succeeded */
+
+BEGIN_FW_FTR_SECTION
+ /*
+ * If we had interrupts soft-enabled at the point where the
+ * DSI/ISI occurred, and an interrupt came in during hash_page,
+ * handle it now.
+ * We jump to ret_from_except_lite rather than fast_exception_return
+ * because ret_from_except_lite will check for and handle pending
+ * interrupts if necessary.
+ */
+ beq 13f
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+
+BEGIN_FW_FTR_SECTION
+ /*
+ * Here we have interrupts hard-disabled, so it is sufficient
+ * to restore paca->{soft,hard}_enable and get out.
+ */
+ beq fast_exc_return_irq /* Return from exception on success */
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+
+ /* For a hash failure, we don't bother re-enabling interrupts */
+ ble- 12f
+
+ /*
+ * hash_page couldn't handle it, set soft interrupt enable back
+ * to what it was before the trap. Note that .raw_local_irq_restore
+ * handles any interrupts pending at this point.
+ */
+ ld r3,SOFTE(r1)
+ TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
+ bl .raw_local_irq_restore
+ b 11f
+
+/* Here we have a page fault that hash_page can't handle. */
+handle_page_fault:
+ ENABLE_INTS
+11: ld r4,_DAR(r1)
+ ld r5,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_page_fault
+ cmpdi r3,0
+ beq+ 13f
+ bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ lwz r4,_DAR(r1)
+ bl .bad_page_fault
+ b .ret_from_except
+
+13: b .ret_from_except_lite
+
+/* We have a page fault that hash_page could handle but HV refused
+ * the PTE insertion
+ */
+12: bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r4,_DAR(r1)
+ bl .low_hash_fault
+ b .ret_from_except
+
+ /* here we have a segment miss */
+do_ste_alloc:
+ bl .ste_allocate /* try to insert stab entry */
+ cmpdi r3,0
+ bne- handle_page_fault
+ b fast_exception_return
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * r9 - r13 are saved in paca->exslb.
+ * We assume we aren't going to take any exceptions during this procedure.
+ * We assume (DAR >> 60) == 0xc.
+ */
+ .align 7
+_GLOBAL(do_stab_bolted)
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+
+ /* Hash to the primary group */
+ ld r10,PACASTABVIRT(r13)
+ mfspr r11,SPRN_DAR
+ srdi r11,r11,28
+ rldimi r10,r11,7,52 /* r10 = first ste of the group */
+
+ /* Calculate VSID */
+ /* This is a kernel address, so protovsid = ESID */
+ ASM_VSID_SCRAMBLE(r11, r9, 256M)
+ rldic r9,r11,12,16 /* r9 = vsid << 12 */
+
+ /* Search the primary group for a free entry */
+1: ld r11,0(r10) /* Test valid bit of the current ste */
+ andi. r11,r11,0x80
+ beq 2f
+ addi r10,r10,16
+ andi. r11,r10,0x70
+ bne 1b
+
+ /* Stick for only searching the primary group for now. */
+ /* At least for now, we use a very simple random castout scheme */
+ /* Use the TB as a random number ; OR in 1 to avoid entry 0 */
+ mftb r11
+ rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
+ ori r11,r11,0x10
+
+ /* r10 currently points to an ste one past the group of interest */
+ /* make it point to the randomly selected entry */
+ subi r10,r10,128
+ or r10,r10,r11 /* r10 is the entry to invalidate */
+
+ isync /* mark the entry invalid */
+ ld r11,0(r10)
+ rldicl r11,r11,56,1 /* clear the valid bit */
+ rotldi r11,r11,8
+ std r11,0(r10)
+ sync
+
+ clrrdi r11,r11,28 /* Get the esid part of the ste */
+ slbie r11
+
+2: std r9,8(r10) /* Store the vsid part of the ste */
+ eieio
+
+ mfspr r11,SPRN_DAR /* Get the new esid */
+ clrrdi r11,r11,28 /* Permits a full 32b of ESID */
+ ori r11,r11,0x90 /* Turn on valid and kp */
+ std r11,0(r10) /* Put new entry back into the stab */
+
+ sync
+
+ /* All done -- return from exception. */
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+ ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
+
+ andi. r10,r12,MSR_RI
+ beq- unrecov_slb
+
+ mtcrf 0x80,r9 /* restore CR */
+
+ mfmsr r10
+ clrrdi r10,r10,2
+ mtmsrd r10,1
+
+ mtspr SPRN_SRR0,r11
+ mtspr SPRN_SRR1,r12
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on). The address is given to the hv
+ * as a page number (see xLparMap below), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+ . = STAB0_OFFSET /* 0x6000 */
+ .globl initial_stab
+initial_stab:
+ .space 4096
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ */
+ .= 0x7000
+ .globl fwnmi_data_area
+fwnmi_data_area:
+#endif /* CONFIG_PPC_PSERIES */
+
+ /* iSeries does not use the FWNMI stuff, so it is safe to put
+ * this here, even if we later allow kernels that will boot on
+ * both pSeries and iSeries */
+#ifdef CONFIG_PPC_ISERIES
+ . = LPARMAP_PHYS
+ .globl xLparMap
+xLparMap:
+ .quad HvEsidsToMap /* xNumberEsids */
+ .quad HvRangesToMap /* xNumberRanges */
+ .quad STAB0_PAGE /* xSegmentTableOffs */
+ .zero 40 /* xRsvd */
+ /* xEsids (HvEsidsToMap entries of 2 quads) */
+ .quad PAGE_OFFSET_ESID /* xKernelEsid */
+ .quad PAGE_OFFSET_VSID /* xKernelVsid */
+ .quad VMALLOC_START_ESID /* xKernelEsid */
+ .quad VMALLOC_START_VSID /* xKernelVsid */
+ /* xRanges (HvRangesToMap entries of 3 quads) */
+ .quad HvPagesToMap /* xPages */
+ .quad 0 /* xOffset */
+ .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */
+
+#endif /* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_PPC_PSERIES
+ . = 0x8000
+#endif /* CONFIG_PPC_PSERIES */
* Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
*
- * This file contains the low-level support and setup for the
- * PowerPC-64 platform, including trap and interrupt dispatch.
+ * This file contains the entry point for the 64-bit kernel along
+ * with some early initialization code common to all 64-bit powerpc
+ * variants.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#include <asm/exception.h>
#include <asm/irqflags.h>
-/*
- * We layout physical memory as follows:
- * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
- * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - : Early init and support code
- */
-
-/*
- * SPRG Usage
- *
- * Register Definition
- *
- * SPRG0 reserved for hypervisor
- * SPRG1 temp - used to save gpr
- * SPRG2 temp - used to save gpr
- * SPRG3 virt addr of paca
+/* The physical memory is layed out such that the secondary processor
+ * spin code sits at 0x0000...0x00ff. On server, the vectors follow
+ * using the layout described in exceptions-64s.S
*/
/*
* Entering into this code we make the following assumptions:
- * For pSeries:
+ *
+ * For pSeries or server processors:
* 1. The MMU is off & open firmware is running in real mode.
* 2. The kernel is entered at __start
*
* For iSeries:
* 1. The MMU is on (as it always is for iSeries)
* 2. The kernel is entered at system_reset_iSeries
+ *
+ * For Book3E processors:
+ * 1. The MMU is on running in AS0 in a state defined in ePAPR
+ * 2. The kernel is entered at __start
*/
.text
.text
/*
- * This is the start of the interrupt handlers for pSeries
- * This code runs with relocation off.
- * Code from here to __end_interrupts gets copied down to real
- * address 0x100 when we are running a relocatable kernel.
- * Therefore any relative branches in this section must only
- * branch to labels in this section.
- */
- . = 0x100
- .globl __start_interrupts
-__start_interrupts:
-
- STD_EXCEPTION_PSERIES(0x100, system_reset)
-
- . = 0x200
-_machine_check_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
- . = 0x300
- .globl data_access_pSeries
-data_access_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
-BEGIN_FTR_SECTION
- mtspr SPRN_SPRG2,r12
- mfspr r13,SPRN_DAR
- mfspr r12,SPRN_DSISR
- srdi r13,r13,60
- rlwimi r13,r12,16,0x20
- mfcr r12
- cmpwi r13,0x2c
- beq do_stab_bolted_pSeries
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-
- . = 0x380
- .globl data_access_slb_pSeries
-data_access_slb_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r3,SPRN_DAR
- std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
- mfcr r9
-#ifdef __DISABLED__
- /* Keep that around for when we re-implement dynamic VSIDs */
- cmpdi r3,0
- bge slb_miss_user_pseries
-#endif /* __DISABLED__ */
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- mfspr r12,SPRN_SRR1 /* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
-#else
- /*
- * We can't just use a direct branch to .slb_miss_realmode
- * because the distance from here to there depends on where
- * the kernel ends up being put.
- */
- mfctr r11
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
- mtctr r10
- bctr
-#endif
-
- STD_EXCEPTION_PSERIES(0x400, instruction_access)
-
- . = 0x480
- .globl instruction_access_slb_pSeries
-instruction_access_slb_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
- std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
- mfcr r9
-#ifdef __DISABLED__
- /* Keep that around for when we re-implement dynamic VSIDs */
- cmpdi r3,0
- bge slb_miss_user_pseries
-#endif /* __DISABLED__ */
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- mfspr r12,SPRN_SRR1 /* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
-#else
- mfctr r11
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
- mtctr r10
- bctr
-#endif
-
- MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
- STD_EXCEPTION_PSERIES(0x600, alignment)
- STD_EXCEPTION_PSERIES(0x700, program_check)
- STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
- MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
- STD_EXCEPTION_PSERIES(0xa00, trap_0a)
- STD_EXCEPTION_PSERIES(0xb00, trap_0b)
-
- . = 0xc00
- .globl system_call_pSeries
-system_call_pSeries:
- HMT_MEDIUM
-BEGIN_FTR_SECTION
- cmpdi r0,0x1ebe
- beq- 1f
-END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
- mr r9,r13
- mfspr r13,SPRN_SPRG3
- mfspr r11,SPRN_SRR0
- ld r12,PACAKBASE(r13)
- ld r10,PACAKMSR(r13)
- LOAD_HANDLER(r12, system_call_entry)
- mtspr SPRN_SRR0,r12
- mfspr r12,SPRN_SRR1
- mtspr SPRN_SRR1,r10
- rfid
- b . /* prevent speculative execution */
-
-/* Fast LE/BE switch system call */
-1: mfspr r12,SPRN_SRR1
- xori r12,r12,MSR_LE
- mtspr SPRN_SRR1,r12
- rfid /* return to userspace */
- b .
-
- STD_EXCEPTION_PSERIES(0xd00, single_step)
- STD_EXCEPTION_PSERIES(0xe00, trap_0e)
-
- /* We need to deal with the Altivec unavailable exception
- * here which is at 0xf20, thus in the middle of the
- * prolog code of the PerformanceMonitor one. A little
- * trickery is thus necessary
- */
- . = 0xf00
- b performance_monitor_pSeries
-
- . = 0xf20
- b altivec_unavailable_pSeries
-
- . = 0xf40
- b vsx_unavailable_pSeries
-
-#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
-#endif /* CONFIG_CBE_RAS */
- STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
-#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
-#endif /* CONFIG_CBE_RAS */
- STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
-#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
-#endif /* CONFIG_CBE_RAS */
-
- . = 0x3000
-
-/*** pSeries interrupt support ***/
-
- /* moved from 0xf00 */
- STD_EXCEPTION_PSERIES(., performance_monitor)
- STD_EXCEPTION_PSERIES(., altivec_unavailable)
- STD_EXCEPTION_PSERIES(., vsx_unavailable)
-
-/*
- * An interrupt came in while soft-disabled; clear EE in SRR1,
- * clear paca->hard_enabled and return.
- */
-masked_interrupt:
- stb r10,PACAHARDIRQEN(r13)
- mtcrf 0x80,r9
- ld r9,PACA_EXGEN+EX_R9(r13)
- mfspr r10,SPRN_SRR1
- rldicl r10,r10,48,1 /* clear MSR_EE */
- rotldi r10,r10,16
- mtspr SPRN_SRR1,r10
- ld r10,PACA_EXGEN+EX_R10(r13)
- mfspr r13,SPRN_SPRG1
- rfid
- b .
-
- .align 7
-do_stab_bolted_pSeries:
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
- EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Vectors for the FWNMI option. Share common code.
- */
- .globl system_reset_fwnmi
- .align 7
-system_reset_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
-
- .globl machine_check_fwnmi
- .align 7
-machine_check_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
-#endif /* CONFIG_PPC_PSERIES */
-
-#ifdef __DISABLED__
-/*
- * This is used for when the SLB miss handler has to go virtual,
- * which doesn't happen for now anymore but will once we re-implement
- * dynamic VSIDs for shared page tables
- */
-slb_miss_user_pseries:
- std r10,PACA_EXGEN+EX_R10(r13)
- std r11,PACA_EXGEN+EX_R11(r13)
- std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG1
- ld r11,PACA_EXSLB+EX_R9(r13)
- ld r12,PACA_EXSLB+EX_R3(r13)
- std r10,PACA_EXGEN+EX_R13(r13)
- std r11,PACA_EXGEN+EX_R9(r13)
- std r12,PACA_EXGEN+EX_R3(r13)
- clrrdi r12,r13,32
- mfmsr r10
- mfspr r11,SRR0 /* save SRR0 */
- ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI
- mtspr SRR0,r12
- mfspr r12,SRR1 /* and SRR1 */
- mtspr SRR1,r10
- rfid
- b . /* prevent spec. execution */
-#endif /* __DISABLED__ */
-
- .align 7
- .globl __end_interrupts
-__end_interrupts:
-
-/*
- * Code from here down to __end_handlers is invoked from the
- * exception prologs above. Because the prologs assemble the
- * addresses of these handlers using the LOAD_HANDLER macro,
- * which uses an addi instruction, these handlers must be in
- * the first 32k of the kernel image.
- */
-
-/*** Common interrupt handlers ***/
-
- STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
-
- /*
- * Machine check is different because we use a different
- * save area: PACA_EXMC instead of PACA_EXGEN.
- */
- .align 7
- .globl machine_check_common
-machine_check_common:
- EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
- FINISH_NAP
- DISABLE_INTS
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_exception
- b .ret_from_except
-
- STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
- STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
- STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
- STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
- STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
- STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
-#ifdef CONFIG_ALTIVEC
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
-#else
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
-#endif
-#ifdef CONFIG_CBE_RAS
- STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
- STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
- STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
-#endif /* CONFIG_CBE_RAS */
-
- .align 7
-system_call_entry:
- b system_call_common
-
-/*
- * Here we have detected that the kernel stack pointer is bad.
- * R9 contains the saved CR, r13 points to the paca,
- * r10 contains the (bad) kernel stack pointer,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * We switch to using an emergency stack, save the registers there,
- * and call kernel_bad_stack(), which panics.
- */
-bad_stack:
- ld r1,PACAEMERGSP(r13)
- subi r1,r1,64+INT_FRAME_SIZE
- std r9,_CCR(r1)
- std r10,GPR1(r1)
- std r11,_NIP(r1)
- std r12,_MSR(r1)
- mfspr r11,SPRN_DAR
- mfspr r12,SPRN_DSISR
- std r11,_DAR(r1)
- std r12,_DSISR(r1)
- mflr r10
- mfctr r11
- mfxer r12
- std r10,_LINK(r1)
- std r11,_CTR(r1)
- std r12,_XER(r1)
- SAVE_GPR(0,r1)
- SAVE_GPR(2,r1)
- SAVE_4GPRS(3,r1)
- SAVE_2GPRS(7,r1)
- SAVE_10GPRS(12,r1)
- SAVE_10GPRS(22,r1)
- lhz r12,PACA_TRAP_SAVE(r13)
- std r12,_TRAP(r1)
- addi r11,r1,INT_FRAME_SIZE
- std r11,0(r1)
- li r12,0
- std r12,0(r11)
- ld r2,PACATOC(r13)
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
- b 1b
-
-/*
- * Here r13 points to the paca, r9 contains the saved CR,
- * SRR0 and SRR1 are saved in r11 and r12,
- * r9 - r13 are saved in paca->exgen.
- */
- .align 7
- .globl data_access_common
-data_access_common:
- mfspr r10,SPRN_DAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_DSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
- ld r3,PACA_EXGEN+EX_DAR(r13)
- lwz r4,PACA_EXGEN+EX_DSISR(r13)
- li r5,0x300
- b .do_hash_page /* Try to handle as hpte fault */
-
- .align 7
- .globl instruction_access_common
-instruction_access_common:
- EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
- ld r3,_NIP(r1)
- andis. r4,r12,0x5820
- li r5,0x400
- b .do_hash_page /* Try to handle as hpte fault */
-
-/*
- * Here is the common SLB miss user that is used when going to virtual
- * mode for SLB misses, that is currently not used
- */
-#ifdef __DISABLED__
- .align 7
- .globl slb_miss_user_common
-slb_miss_user_common:
- mflr r10
- std r3,PACA_EXGEN+EX_DAR(r13)
- stw r9,PACA_EXGEN+EX_CCR(r13)
- std r10,PACA_EXGEN+EX_LR(r13)
- std r11,PACA_EXGEN+EX_SRR0(r13)
- bl .slb_allocate_user
-
- ld r10,PACA_EXGEN+EX_LR(r13)
- ld r3,PACA_EXGEN+EX_R3(r13)
- lwz r9,PACA_EXGEN+EX_CCR(r13)
- ld r11,PACA_EXGEN+EX_SRR0(r13)
- mtlr r10
- beq- slb_miss_fault
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_user_slb
- mfmsr r10
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
-.machine pop
-
- clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
- mtmsrd r10,1
-
- mtspr SRR0,r11
- mtspr SRR1,r12
-
- ld r9,PACA_EXGEN+EX_R9(r13)
- ld r10,PACA_EXGEN+EX_R10(r13)
- ld r11,PACA_EXGEN+EX_R11(r13)
- ld r12,PACA_EXGEN+EX_R12(r13)
- ld r13,PACA_EXGEN+EX_R13(r13)
- rfid
- b .
-
-slb_miss_fault:
- EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
- ld r4,PACA_EXGEN+EX_DAR(r13)
- li r5,0
- std r4,_DAR(r1)
- std r5,_DSISR(r1)
- b handle_page_fault
-
-unrecov_user_slb:
- EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-#endif /* __DISABLED__ */
-
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-#ifdef CONFIG_RELOCATABLE
- mtctr r11
-#endif
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- ld r11,PACALPPACAPTR(r13)
- ld r11,LPPACASRR0(r11) /* get SRR0 value */
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- 2f
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-2:
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- b unrecov_slb
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
- mfspr r11,SPRN_SRR0
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10,unrecov_slb)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b .
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
- .align 7
- .globl hardware_interrupt_common
- .globl hardware_interrupt_entry
-hardware_interrupt_common:
- EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
- FINISH_NAP
-hardware_interrupt_entry:
- DISABLE_INTS
-BEGIN_FTR_SECTION
- bl .ppc64_runlatch_on
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_IRQ
- b .ret_from_except_lite
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
- andc r9,r9,r10
- std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
- blr
-#endif
-
- .align 7
- .globl alignment_common
-alignment_common:
- mfspr r10,SPRN_DAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_DSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
- ld r3,PACA_EXGEN+EX_DAR(r13)
- lwz r4,PACA_EXGEN+EX_DSISR(r13)
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .alignment_exception
- b .ret_from_except
-
- .align 7
- .globl program_check_common
-program_check_common:
- EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .program_check_exception
- b .ret_from_except
-
- .align 7
- .globl fp_unavailable_common
-fp_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
- bne 1f /* if from user, just load it up */
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .kernel_fp_unavailable_exception
- BUG_OPCODE
-1: bl .load_up_fpu
- b fast_exception_return
-
- .align 7
- .globl altivec_unavailable_common
-altivec_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
- beq 1f
- bl .load_up_altivec
- b fast_exception_return
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .altivec_unavailable_exception
- b .ret_from_except
-
- .align 7
- .globl vsx_unavailable_common
-vsx_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
- bne .load_up_vsx
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .vsx_unavailable_exception
- b .ret_from_except
-
- .align 7
- .globl __end_handlers
-__end_handlers:
-
-/*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
+ * On server, we include the exception vectors code here as it
+ * relies on absolute addressing which is only possible within
+ * this compilation unit
*/
-fast_exc_return_irq: /* restores irq state too */
- ld r3,SOFTE(r1)
- TRACE_AND_RESTORE_IRQ(r3);
- ld r12,_MSR(r1)
- rldicl r4,r12,49,63 /* get MSR_EE to LSB */
- stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
- b 1f
-
- .globl fast_exception_return
-fast_exception_return:
- ld r12,_MSR(r1)
-1: ld r11,_NIP(r1)
- andi. r3,r12,MSR_RI /* check if RI is set */
- beq- unrecov_fer
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- andi. r3,r12,MSR_PR
- beq 2f
- ACCOUNT_CPU_USER_EXIT(r3, r4)
-2:
+#ifdef CONFIG_PPC_BOOK3S
+#include "exceptions-64s.S"
#endif
- ld r3,_CCR(r1)
- ld r4,_LINK(r1)
- ld r5,_CTR(r1)
- ld r6,_XER(r1)
- mtcr r3
- mtlr r4
- mtctr r5
- mtxer r6
- REST_GPR(0, r1)
- REST_8GPRS(2, r1)
-
- mfmsr r10
- rldicl r10,r10,48,1 /* clear EE */
- rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
- mtmsrd r10,1
-
- mtspr SPRN_SRR1,r12
- mtspr SPRN_SRR0,r11
- REST_4GPRS(10, r1)
- ld r1,GPR1(r1)
- rfid
- b . /* prevent speculative execution */
-
-unrecov_fer:
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-
-/*
- * Hash table stuff
- */
- .align 7
-_STATIC(do_hash_page)
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
-
- andis. r0,r4,0xa450 /* weird error? */
- bne- handle_page_fault /* if not, try to insert a HPTE */
-BEGIN_FTR_SECTION
- andis. r0,r4,0x0020 /* Is it a segment table fault? */
- bne- do_ste_alloc /* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-
- /*
- * On iSeries, we soft-disable interrupts here, then
- * hard-enable interrupts so that the hash_page code can spin on
- * the hash_table_lock without problems on a shared processor.
- */
- DISABLE_INTS
-
- /*
- * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
- * and will clobber volatile registers when irq tracing is enabled
- * so we need to reload them. It may be possible to be smarter here
- * and move the irq tracing elsewhere but let's keep it simple for
- * now
- */
-#ifdef CONFIG_TRACE_IRQFLAGS
- ld r3,_DAR(r1)
- ld r4,_DSISR(r1)
- ld r5,_TRAP(r1)
- ld r12,_MSR(r1)
- clrrdi r5,r5,4
-#endif /* CONFIG_TRACE_IRQFLAGS */
- /*
- * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
- * accessing a userspace segment (even from the kernel). We assume
- * kernel addresses always have the high bit set.
- */
- rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
- rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
- orc r0,r12,r0 /* MSR_PR | ~high_bit */
- rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
- ori r4,r4,1 /* add _PAGE_PRESENT */
- rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
-
- /*
- * r3 contains the faulting address
- * r4 contains the required access permissions
- * r5 contains the trap number
- *
- * at return r3 = 0 for success
- */
- bl .hash_page /* build HPTE if possible */
- cmpdi r3,0 /* see if hash_page succeeded */
-
-BEGIN_FW_FTR_SECTION
- /*
- * If we had interrupts soft-enabled at the point where the
- * DSI/ISI occurred, and an interrupt came in during hash_page,
- * handle it now.
- * We jump to ret_from_except_lite rather than fast_exception_return
- * because ret_from_except_lite will check for and handle pending
- * interrupts if necessary.
- */
- beq 13f
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
-BEGIN_FW_FTR_SECTION
- /*
- * Here we have interrupts hard-disabled, so it is sufficient
- * to restore paca->{soft,hard}_enable and get out.
- */
- beq fast_exc_return_irq /* Return from exception on success */
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-
- /* For a hash failure, we don't bother re-enabling interrupts */
- ble- 12f
-
- /*
- * hash_page couldn't handle it, set soft interrupt enable back
- * to what it was before the trap. Note that .raw_local_irq_restore
- * handles any interrupts pending at this point.
- */
- ld r3,SOFTE(r1)
- TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
- bl .raw_local_irq_restore
- b 11f
-
-/* Here we have a page fault that hash_page can't handle. */
-handle_page_fault:
- ENABLE_INTS
-11: ld r4,_DAR(r1)
- ld r5,_DSISR(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_page_fault
- cmpdi r3,0
- beq+ 13f
- bl .save_nvgprs
- mr r5,r3
- addi r3,r1,STACK_FRAME_OVERHEAD
- lwz r4,_DAR(r1)
- bl .bad_page_fault
- b .ret_from_except
-
-13: b .ret_from_except_lite
-
-/* We have a page fault that hash_page could handle but HV refused
- * the PTE insertion
- */
-12: bl .save_nvgprs
- mr r5,r3
- addi r3,r1,STACK_FRAME_OVERHEAD
- ld r4,_DAR(r1)
- bl .low_hash_fault
- b .ret_from_except
-
- /* here we have a segment miss */
-do_ste_alloc:
- bl .ste_allocate /* try to insert stab entry */
- cmpdi r3,0
- bne- handle_page_fault
- b fast_exception_return
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * r9 - r13 are saved in paca->exslb.
- * We assume we aren't going to take any exceptions during this procedure.
- * We assume (DAR >> 60) == 0xc.
- */
- .align 7
-_GLOBAL(do_stab_bolted)
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
-
- /* Hash to the primary group */
- ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
- rldimi r10,r11,7,52 /* r10 = first ste of the group */
-
- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID */
- ASM_VSID_SCRAMBLE(r11, r9, 256M)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
- /* Search the primary group for a free entry */
-1: ld r11,0(r10) /* Test valid bit of the current ste */
- andi. r11,r11,0x80
- beq 2f
- addi r10,r10,16
- andi. r11,r10,0x70
- bne 1b
-
- /* Stick for only searching the primary group for now. */
- /* At least for now, we use a very simple random castout scheme */
- /* Use the TB as a random number ; OR in 1 to avoid entry 0 */
- mftb r11
- rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
- ori r11,r11,0x10
-
- /* r10 currently points to an ste one past the group of interest */
- /* make it point to the randomly selected entry */
- subi r10,r10,128
- or r10,r10,r11 /* r10 is the entry to invalidate */
-
- isync /* mark the entry invalid */
- ld r11,0(r10)
- rldicl r11,r11,56,1 /* clear the valid bit */
- rotldi r11,r11,8
- std r11,0(r10)
- sync
-
- clrrdi r11,r11,28 /* Get the esid part of the ste */
- slbie r11
-
-2: std r9,8(r10) /* Store the vsid part of the ste */
- eieio
-
- mfspr r11,SPRN_DAR /* Get the new esid */
- clrrdi r11,r11,28 /* Permits a full 32b of ESID */
- ori r11,r11,0x90 /* Turn on valid and kp */
- std r11,0(r10) /* Put new entry back into the stab */
-
- sync
-
- /* All done -- return from exception. */
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
- ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
-
- andi. r10,r12,MSR_RI
- beq- unrecov_slb
-
- mtcrf 0x80,r9 /* restore CR */
-
- mfmsr r10
- clrrdi r10,r10,2
- mtmsrd r10,1
-
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on). The address is given to the hv
- * as a page number (see xLparMap below), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
- . = STAB0_OFFSET /* 0x6000 */
- .globl initial_stab
-initial_stab:
- .space 4096
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
- .= 0x7000
- .globl fwnmi_data_area
-fwnmi_data_area:
-#endif /* CONFIG_PPC_PSERIES */
-
- /* iSeries does not use the FWNMI stuff, so it is safe to put
- * this here, even if we later allow kernels that will boot on
- * both pSeries and iSeries */
-#ifdef CONFIG_PPC_ISERIES
- . = LPARMAP_PHYS
- .globl xLparMap
-xLparMap:
- .quad HvEsidsToMap /* xNumberEsids */
- .quad HvRangesToMap /* xNumberRanges */
- .quad STAB0_PAGE /* xSegmentTableOffs */
- .zero 40 /* xRsvd */
- /* xEsids (HvEsidsToMap entries of 2 quads) */
- .quad PAGE_OFFSET_ESID /* xKernelEsid */
- .quad PAGE_OFFSET_VSID /* xKernelVsid */
- .quad VMALLOC_START_ESID /* xKernelEsid */
- .quad VMALLOC_START_VSID /* xKernelVsid */
- /* xRanges (HvRangesToMap entries of 3 quads) */
- .quad HvPagesToMap /* xPages */
- .quad 0 /* xOffset */
- .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */
-
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_PSERIES
- . = 0x8000
-#endif /* CONFIG_PPC_PSERIES */
/*
* On pSeries and most other platforms, secondary processors spin
projects / mirror_ubuntu-zesty-kernel.git / commitdiff