net: dsa: bcm_sf2: Add support for BCM7278 integrated switch

Add support for the integrated switch found on BCM7278:

- core_reg_align is set to 1, to force a translation into the target
  address space which is 8 bytes aligned
- an alternate SWITCH_REG layout is provided since registers are largely
  bit/masks compatible but have different offsets
- conditional for all CORE_STS_OVERRIDE_{IMP,GMII_P} since those got
  moved way out of the traditional register space

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
index fb40891ee606ca5330d3c07844ff1fb07101efba..e1b2c3e32859b298807157fa0fe42b7734901019 100644 (file)
--- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 
-- compatible: should be "brcm,bcm7445-switch-v4.0"
+- compatible: should be "brcm,bcm7445-switch-v4.0" or "brcm,bcm7278-switch-v4.0"
 - reg: addresses and length of the register sets for the device, must be 6
   pairs of register addresses and lengths
 - interrupts: interrupts for the devices, must be two interrupts

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 5102a3701a1a790c49d3d3841d1abcf4d3865c1d..5cbb14f6a03b4fa4711fff455ba01f9079e4ea5e 100644 (file)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1685,6 +1685,18 @@ static const struct b53_chip_data b53_switch_chips[] = {
                .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
                .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
        },
+       {
+               .chip_id = BCM7278_DEVICE_ID,
+               .dev_name = "BCM7278",
+               .vlans = 4096,
+               .enabled_ports = 0x1ff,
+               .arl_entries= 4,
+               .cpu_port = B53_CPU_PORT,
+               .vta_regs = B53_VTA_REGS,
+               .duplex_reg = B53_DUPLEX_STAT_GE,
+               .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+               .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+       },
 };
 
 static int b53_switch_init(struct b53_device *dev)

diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 86f125d55aaf2b346dfa9182f924e1d8849e6ae5..a8031b382c5534a45ffb3489a531b8112b01f07c 100644 (file)
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -62,6 +62,7 @@ enum {
        BCM53019_DEVICE_ID = 0x53019,
        BCM58XX_DEVICE_ID = 0x5800,
        BCM7445_DEVICE_ID = 0x7445,
+       BCM7278_DEVICE_ID = 0x7278,
 };
 
 #define B53_N_PORTS    9
@@ -179,7 +180,8 @@ static inline int is5301x(struct b53_device *dev)
 static inline int is58xx(struct b53_device *dev)
 {
        return dev->chip_id == BCM58XX_DEVICE_ID ||
-               dev->chip_id == BCM7445_DEVICE_ID;
+               dev->chip_id == BCM7445_DEVICE_ID ||
+               dev->chip_id == BCM7278_DEVICE_ID;
 }
 
 #define B53_CPU_PORT_25        5

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index d952099afc60d500a12426c12ebebd4c0ed6e755..02afa0598b245f55701025a3cb800841cdc07d34 100644 (file)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -64,7 +64,12 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
        struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-       u32 reg, val;
+       u32 reg, val, offset;
+
+       if (priv->type == BCM7445_DEVICE_ID)
+               offset = CORE_STS_OVERRIDE_IMP;
+       else
+               offset = CORE_STS_OVERRIDE_IMP2;
 
        /* Enable the port memories */
        reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
@@ -121,9 +126,9 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
        core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
 
        /* Force link status for IMP port */
-       reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
+       reg = core_readl(priv, offset);
        reg |= (MII_SW_OR | LINK_STS);
-       core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
+       core_writel(priv, reg, offset);
 }
 
 static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
@@ -591,7 +596,12 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
        struct ethtool_eee *p = &priv->port_sts[port].eee;
        u32 id_mode_dis = 0, port_mode;
        const char *str = NULL;
-       u32 reg;
+       u32 reg, offset;
+
+       if (priv->type == BCM7445_DEVICE_ID)
+               offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+       else
+               offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
 
        switch (phydev->interface) {
        case PHY_INTERFACE_MODE_RGMII:
@@ -662,7 +672,7 @@ force_link:
        if (phydev->duplex == DUPLEX_FULL)
                reg |= DUPLX_MODE;
 
-       core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+       core_writel(priv, reg, offset);
 
        if (!phydev->is_pseudo_fixed_link)
                p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
@@ -672,9 +682,14 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
                                         struct fixed_phy_status *status)
 {
        struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-       u32 duplex, pause;
+       u32 duplex, pause, offset;
        u32 reg;
 
+       if (priv->type == BCM7445_DEVICE_ID)
+               offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+       else
+               offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+
        duplex = core_readl(priv, CORE_DUPSTS);
        pause = core_readl(priv, CORE_PAUSESTS);
 
@@ -703,13 +718,13 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
                status->duplex = !!(duplex & (1 << port));
        }
 
-       reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+       reg = core_readl(priv, offset);
        reg |= SW_OVERRIDE;
        if (status->link)
                reg |= LINK_STS;
        else
                reg &= ~LINK_STS;
-       core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+       core_writel(priv, reg, offset);
 
        if ((pause & (1 << port)) &&
            (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
@@ -1038,10 +1053,35 @@ static const struct bcm_sf2_of_data bcm_sf2_7445_data = {
        .reg_offsets    = bcm_sf2_7445_reg_offsets,
 };
 
+static const u16 bcm_sf2_7278_reg_offsets[] = {
+       [REG_SWITCH_CNTRL]      = 0x00,
+       [REG_SWITCH_STATUS]     = 0x04,
+       [REG_DIR_DATA_WRITE]    = 0x08,
+       [REG_DIR_DATA_READ]     = 0x0c,
+       [REG_SWITCH_REVISION]   = 0x10,
+       [REG_PHY_REVISION]      = 0x14,
+       [REG_SPHY_CNTRL]        = 0x24,
+       [REG_RGMII_0_CNTRL]     = 0xe0,
+       [REG_RGMII_1_CNTRL]     = 0xec,
+       [REG_RGMII_2_CNTRL]     = 0xf8,
+       [REG_LED_0_CNTRL]       = 0x40,
+       [REG_LED_1_CNTRL]       = 0x4c,
+       [REG_LED_2_CNTRL]       = 0x58,
+};
+
+static const struct bcm_sf2_of_data bcm_sf2_7278_data = {
+       .type           = BCM7278_DEVICE_ID,
+       .core_reg_align = 1,
+       .reg_offsets    = bcm_sf2_7278_reg_offsets,
+};
+
 static const struct of_device_id bcm_sf2_of_match[] = {
        { .compatible = "brcm,bcm7445-switch-v4.0",
          .data = &bcm_sf2_7445_data
        },
+       { .compatible = "brcm,bcm7278-switch-v4.0",
+         .data = &bcm_sf2_7278_data
+       },
        { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, bcm_sf2_of_match);

diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index f5e566304f0cf56cc2ac291954941a71903b58ea..3b33b8010cc8f92eefdc3cbeb10c603947b9c457 100644 (file)
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -134,6 +134,9 @@ enum bcm_sf2_reg_offs {
 #define  GMII_SPEED_UP_2G              (1 << 6)
 #define  MII_SW_OR                     (1 << 7)
 
+/* Alternate layout for e.g: 7278 */
+#define CORE_STS_OVERRIDE_IMP2         0x39040
+
 #define CORE_NEW_CTRL                  0x00084
 #define  IP_MC                         (1 << 0)
 #define  OUTRANGEERR_DISCARD           (1 << 1)
@@ -151,6 +154,7 @@ enum bcm_sf2_reg_offs {
 #define  SW_LEARN_CNTL(x)              (1 << (x))
 
 #define CORE_STS_OVERRIDE_GMIIP_PORT(x)        (0x160 + (x) * 4)
+#define CORE_STS_OVERRIDE_GMIIP2_PORT(x) (0x39000 + (x) * 8)
 #define  LINK_STS                      (1 << 0)
 #define  DUPLX_MODE                    (1 << 1)
 #define  SPEED_SHIFT                   2