.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
-struct map_desc smdk6410_iodesc[] = {};
+static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
#ifdef CONFIG_SMDK6410_SD_CH0
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("WM8580", 0X1b), },
+ { I2C_BOARD_INFO("wm8580", 0x1b), },
};
static struct i2c_board_info i2c_devs1[] __initdata = {
&clk_48m,
};
-void s3c64xx_register_clocks(void)
+void __init s3c64xx_register_clocks(void)
{
struct clk *clkp;
int ret;
return 0;
}
-arch_initcall(s3c64xx_gpiolib_init);
+core_initcall(s3c64xx_gpiolib_init);
#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
-#define IRQ_UHOST S3C64XX_IRQ_VIC1(15)
+#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <plat/regs-irqtype.h>
+#include <plat/regs-gpio.h>
+#include <plat/gpio-cfg.h>
#include <mach/map.h>
#include <plat/cpu.h>
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
int offs = eint_offset(irq);
+ int pin;
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
ctrl |= newvalue << shift;
__raw_writel(ctrl, reg);
+ /* set the GPIO pin appropriately */
+
+ if (offs < 23)
+ pin = S3C64XX_GPN(offs);
+ else
+ pin = S3C64XX_GPM(offs - 23);
+
+ s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+
return 0;
}
s3c_irq_demux_eint(20, 27);
}
-int __init s3c64xx_init_irq_eint(void)
+static int __init s3c64xx_init_irq_eint(void)
{
int irq;
static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
{
- void *reg_base = uirq->regs;
+ void __iomem *reg_base = uirq->regs;
unsigned int irq;
int offs;
* ext_xtal_mux for want of an actual name from the manual.
*/
-struct clk clk_ext_xtal_mux = {
+static struct clk clk_ext_xtal_mux = {
.name = "ext_xtal",
.id = -1,
};
void __iomem *reg_divider;
};
-struct clk clk_fout_apll = {
+static struct clk clk_fout_apll = {
.name = "fout_apll",
.id = -1,
};
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
-struct clksrc_clk clk_mout_apll = {
+static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
.id = -1,
.sources = &clk_src_apll,
};
-struct clk clk_fout_epll = {
+static struct clk clk_fout_epll = {
.name = "fout_epll",
.id = -1,
};
.nr_sources = ARRAY_SIZE(clk_src_epll_list),
};
-struct clksrc_clk clk_mout_epll = {
+static struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
.id = -1,
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
-struct clksrc_clk clk_mout_mpll = {
+static struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
.id = -1,
return rate;
}
-struct clk clk_dout_mpll = {
+static struct clk clk_dout_mpll = {
.name = "dout_mpll",
.id = -1,
.parent = &clk_mout_mpll.clk,
};
static struct clk *clkset_uhost_list[] = {
+ &clk_48m,
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_fin_epll,
- &clk_48m,
};
static struct clk_sources clkset_uhost = {
rate = clk_round_rate(clk, rate);
div = clk_get_rate(clk->parent) / rate;
+ if (div > 16)
+ return -EINVAL;
val = __raw_readl(reg);
- val &= ~sclk->mask;
- val |= (rate - 1) << sclk->shift;
+ val &= ~(0xf << sclk->shift);
+ val |= (div - 1) << sclk->shift;
__raw_writel(val, reg);
return 0;
static struct clksrc_clk clk_usbhost = {
.clk = {
- .name = "usb-host-bus",
+ .name = "usb-bus-host",
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,