ARM: dts: Configure interconnect target module for dra7 tpcc

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Let's also correct the custom node name to use generic node name dma.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9f8758052053f8458a4d42b0b7256799801d7b33..9b664b735c68762cedb044c2875675bc88d1379f 100644 (file)
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -331,27 +331,38 @@
                        #pinctrl-cells = <2>;
                };
 
-               edma: edma@43300000 {
-                       compatible = "ti,edma3-tpcc";
+               target-module@43300000 {
+                       compatible = "ti,sysc-omap4", "ti,sysc";
                        ti,hwmods = "tpcc";
-                       reg = <0x43300000 0x100000>;
-                       reg-names = "edma3_cc";
-                       interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-                       interrupt-names = "edma3_ccint", "edma3_mperr",
-                                         "edma3_ccerrint";
-                       dma-requests = <64>;
-                       #dma-cells = <2>;
-
-                       ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
-
-                       /*
-                        * memcpy is disabled, can be enabled with:
-                        * ti,edma-memcpy-channels = <20 21>;
-                        * for example. Note that these channels need to be
-                        * masked in the xbar as well.
-                        */
+                       reg = <0x43300000 0x4>;
+                       reg-names = "rev";
+                       clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+                       clock-names = "fck";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0x0 0x43300000 0x100000>;
+
+                       edma: dma@0 {
+                               compatible = "ti,edma3-tpcc";
+                               reg = <0 0x100000>;
+                               reg-names = "edma3_cc";
+                               interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "edma3_ccint", "edma3_mperr",
+                                                 "edma3_ccerrint";
+                               dma-requests = <64>;
+                               #dma-cells = <2>;
+
+                               ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+                               /*
+                               * memcpy is disabled, can be enabled with:
+                               * ti,edma-memcpy-channels = <20 21>;
+                               * for example. Note that these channels need to be
+                               * masked in the xbar as well.
+                               */
+                       };
                };
 
                edma_tptc0: tptc@43400000 {