ath11k: register HE mesh capabilities

The capabilities for the HE mesh are generated from the capabilities
reported by the fw. But the firmware only reports the overall capabilities
and not the one which are specific for mesh. Some of them (TWT, MU UL/DL,
TB PPDU, ...) require an infrastructure setup with a main STA (AP)
controlling the operations. This is not the case for mesh and thus these
capabilities are removed from the list of capabilities.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 978d8768d68a285b7ffc596de74003346ccd549f..65f6a25855772684bf9ff45e220620ae0f5e0bc3 100644 (file)
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3346,6 +3346,77 @@ static void ath11k_gen_ppe_thresh(struct ath11k_ppe_threshold *fw_ppet,
        }
 }
 
+static void
+ath11k_mac_filter_he_cap_mesh(struct ieee80211_he_cap_elem *he_cap_elem)
+{
+       u8 m;
+
+       m = IEEE80211_HE_MAC_CAP0_TWT_RES |
+           IEEE80211_HE_MAC_CAP0_TWT_REQ;
+       he_cap_elem->mac_cap_info[0] &= ~m;
+
+       m = IEEE80211_HE_MAC_CAP2_TRS |
+           IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+           IEEE80211_HE_MAC_CAP2_MU_CASCADING;
+       he_cap_elem->mac_cap_info[2] &= ~m;
+
+       m = IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED |
+           IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+           IEEE80211_HE_MAC_CAP2_MU_CASCADING;
+       he_cap_elem->mac_cap_info[3] &= ~m;
+
+       m = IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG |
+           IEEE80211_HE_MAC_CAP4_BQR;
+       he_cap_elem->mac_cap_info[4] &= ~m;
+
+       m = IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECVITE_TRANSMISSION |
+           IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU |
+           IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING |
+           IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX;
+       he_cap_elem->mac_cap_info[5] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+           IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO;
+       he_cap_elem->phy_cap_info[2] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA |
+           IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK |
+           IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK;
+       he_cap_elem->phy_cap_info[3] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
+       he_cap_elem->phy_cap_info[4] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK;
+       he_cap_elem->phy_cap_info[5] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU |
+           IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB |
+           IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB |
+           IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO;
+       he_cap_elem->phy_cap_info[6] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP7_SRP_BASED_SR |
+           IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR |
+           IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ |
+           IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ;
+       he_cap_elem->phy_cap_info[7] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI |
+           IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G |
+           IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
+           IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU;
+       he_cap_elem->phy_cap_info[8] &= ~m;
+
+       m = IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM |
+           IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK |
+           IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU |
+           IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU |
+           IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB |
+           IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB;
+       he_cap_elem->phy_cap_info[9] &= ~m;
+}
+
 static int ath11k_mac_copy_he_cap(struct ath11k *ar,
                                  struct ath11k_pdev_cap *cap,
                                  struct ieee80211_sband_iftype_data *data,
@@ -3362,6 +3433,7 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
                switch (i) {
                case NL80211_IFTYPE_STATION:
                case NL80211_IFTYPE_AP:
+               case NL80211_IFTYPE_MESH_POINT:
                        break;
 
                default:
@@ -3402,6 +3474,9 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
                        he_cap_elem->phy_cap_info[9] |=
                                IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU;
                        break;
+               case NL80211_IFTYPE_MESH_POINT:
+                       ath11k_mac_filter_he_cap_mesh(he_cap_elem);
+                       break;
                }
 
                he_cap->he_mcs_nss_supp.rx_mcs_80 =