]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/commitdiff
ARM: OMAP: HWMOD: Unify DSS resets for OMAPs
authorTomi Valkeinen <tomi.valkeinen@ti.com>
Tue, 8 Nov 2011 10:16:13 +0000 (03:16 -0700)
committerPaul Walmsley <paul@pwsan.com>
Tue, 8 Nov 2011 10:16:13 +0000 (03:16 -0700)
This patch adds a custom DSS reset function used on OMAPs from OMAP2
forward.

The function doesn't actually do a reset, it only waits for the reset to
complete. The reason for this is that on OMAP4 there is no possibility
to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets
all the other DSS modules also, thus breaking the HWMOD model where
every DSS module is handled independently.

This fixes the problem with DSS reset on OMAP4, caused by the fact that
because there's no SW reset for dss_core on OMAP4, the HWMOD framework
doesn't try to reset dss_core and thus the DSS clocks were never enabled
at the same time. This causes causes the HWMOD reset to fail for
dss_dispc and dss_rfbi.

The common reset function will also allow us to fix another problem in
the future: before doing a reset we need to disable DSS outputs, which
are in some cases enabled by the bootloader, as otherwise DSS HW seems
to get more or less stuck, requiring a power reset to recover.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o
 unconditionally to avoid an error when !CONFIG_OMAP2_DSS]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
arch/arm/mach-omap2/Makefile
arch/arm/mach-omap2/display.c
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
arch/arm/plat-omap/include/plat/common.h
include/video/omapdss.h

index 69ab1c069134ccee42da01c015aea9d219408f4a..b009f17dee5606de2acbb1b7ba25c8938d0c5adb 100644 (file)
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-        common.o gpio.o dma.o wd_timer.o
+        common.o gpio.o dma.o wd_timer.o display.o
 
 omap-2-3-common                                = irq.o sdrc.o
 hwmod-common                           = omap_hwmod.o \
@@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X)         := gpmc-smsc911x.o
 obj-y                                  += $(smsc911x-m) $(smsc911x-y)
 obj-$(CONFIG_ARCH_OMAP4)               += hwspinlock.o
 
-disp-$(CONFIG_OMAP2_DSS)               := display.o
-obj-y                                  += $(disp-m) $(disp-y)
-
 obj-y                                  += common-board-devices.o twl-common.o
index adb2756e242f104bc8dd35e969ba4957d3407b7a..941b5459707fca6fe25bcd973676a616fb730198 100644 (file)
@@ -27,6 +27,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include <plat/common.h>
 
 #include "control.h"
 
@@ -172,3 +173,37 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 
        return r;
 }
+
+#define MAX_MODULE_SOFTRESET_WAIT      10000
+int omap_dss_reset(struct omap_hwmod *oh)
+{
+       struct omap_hwmod_opt_clk *oc;
+       int c = 0;
+       int i, r;
+
+       if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
+               pr_err("dss_core: hwmod data doesn't contain reset data\n");
+               return -EINVAL;
+       }
+
+       for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+               if (oc->_clk)
+                       clk_enable(oc->_clk);
+
+       omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+                               & SYSS_RESETDONE_MASK),
+                       MAX_MODULE_SOFTRESET_WAIT, c);
+
+       if (c == MAX_MODULE_SOFTRESET_WAIT)
+               pr_warning("dss_core: waiting for reset to finish failed\n");
+       else
+               pr_debug("dss_core: softreset done\n");
+
+       for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+               if (oc->_clk)
+                       clk_disable(oc->_clk);
+
+       r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+       return r;
+}
index d78c1324ae5972091764a6981cf4282d0e954f52..c11273da5dcc33f046e94babfdb6f34c1d6f2778 100644 (file)
@@ -11,6 +11,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 #include <plat/dma.h>
+#include <plat/common.h>
 
 #include <mach/irqs.h>
 
@@ -51,6 +52,7 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
 struct omap_hwmod_class omap2_dss_hwmod_class = {
        .name   = "dss",
        .sysc   = &omap2_dss_sysc,
+       .reset  = omap_dss_reset,
 };
 
 /*
index cadf0bb2d3b72beecdc51586954481e8d6208ba6..3b04d63316f5840ded6c00fd6a4e83b96fb4a896 100644 (file)
@@ -30,6 +30,7 @@
 #include <plat/mmc.h>
 #include <plat/i2c.h>
 #include <plat/dmtimer.h>
+#include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
 static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
        .name   = "dss",
        .sysc   = &omap44xx_dss_sysc,
+       .reset  = omap_dss_reset,
 };
 
 /* dss */
index c50df4814f6f43935c7b021064c610f200ff0dc0..3ff3e36580f267df6890712efef55e8ee22bdbc7 100644 (file)
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 
 #include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
 
 struct sys_timer;
 
@@ -55,6 +56,8 @@ void am35xx_init_early(void);
 void ti816x_init_early(void);
 void omap4430_init_early(void);
 
+extern int omap_dss_reset(struct omap_hwmod *);
+
 void omap_sram_init(void);
 
 /*
index b66ebb2032c6d6b87c928876cab69c235d2425f3..378c7ed6760be0563b501971df2a60e03a672ea7 100644 (file)
@@ -307,15 +307,8 @@ struct omap_dss_board_info {
        void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
 };
 
-#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
 /* Init with the board info */
 extern int omap_display_init(struct omap_dss_board_info *board_data);
-#else
-static inline int omap_display_init(struct omap_dss_board_info *board_data)
-{
-       return 0;
-}
-#endif
 
 struct omap_display_platform_data {
        struct omap_dss_board_info *board_data;