]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/commitdiff
tpm: st33zp24: Add support for acpi probing for spi device.
authorChristophe RICARD <christophe.ricard@gmail.com>
Tue, 23 Feb 2016 21:25:49 +0000 (22:25 +0100)
committerJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Sat, 25 Jun 2016 14:21:42 +0000 (17:21 +0300)
Add support for acpi probing. SMO3324 is used for st33zp24.
It has been tested with the following acpi node on Minnowboard:

Device (TPM1)
{
Name (_ADR, Zero)  // _ADR: Address
Name (_HID, "SMO3324")  // _HID: Hardware ID
Name (_CID, "SMO3324")  // _CID: Compatible ID
Name (_DDN, "SMO TPM")  // _DDN: DOS Device Name
Name (_UID, One)  // _UID: Unique ID
Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
      ControllerInitiated, 4000000, ClockPolarityLow,
      ClockPhaseFirst, "\\_SB.SPI1",
      0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
 "\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{       // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{       // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.TPM1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized)  // _STA: Status
{
Return (0x0F)
}
}

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
drivers/char/tpm/st33zp24/spi.c

index eb351ba48689f04f8164820c499671d694f8f2d3..173db725b53539f16e7e6f99eb7bf4890f88428d 100644 (file)
 #include <linux/module.h>
 #include <linux/spi/spi.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of_irq.h>
 #include <linux/of_gpio.h>
+#include <linux/acpi.h>
 #include <linux/tpm.h>
 #include <linux/platform_data/st33zp24.h>
 
@@ -227,6 +229,42 @@ static const struct st33zp24_phy_ops spi_phy_ops = {
        .recv = st33zp24_spi_recv,
 };
 
+static int st33zp24_spi_acpi_request_resources(struct st33zp24_spi_phy *phy)
+{
+       struct spi_device *spi_dev = phy->spi_device;
+       const struct acpi_device_id *id;
+       struct gpio_desc *gpiod_lpcpd;
+       struct device *dev;
+
+       if (!spi_dev)
+               return -EINVAL;
+
+       dev = &spi_dev->dev;
+
+       /* Match the struct device against a given list of ACPI IDs */
+       id = acpi_match_device(dev->driver->acpi_match_table, dev);
+       if (!id)
+               return -ENODEV;
+
+       /* Get LPCPD GPIO from ACPI */
+       gpiod_lpcpd = devm_gpiod_get_index(dev, "TPM IO LPCPD", 1,
+                                          GPIOD_OUT_HIGH);
+       if (IS_ERR(gpiod_lpcpd)) {
+               dev_err(dev, "Failed to retrieve lpcpd-gpios from acpi.\n");
+               phy->io_lpcpd = -1;
+               /*
+                * lpcpd pin is not specified. This is not an issue as
+                * power management can be also managed by TPM specific
+                * commands. So leave with a success status code.
+                */
+               return 0;
+       }
+
+       phy->io_lpcpd = desc_to_gpio(gpiod_lpcpd);
+
+       return 0;
+}
+
 static int st33zp24_spi_of_request_resources(struct st33zp24_spi_phy *phy)
 {
        struct device_node *pp;
@@ -328,6 +366,10 @@ static int st33zp24_spi_probe(struct spi_device *dev)
                ret = st33zp24_spi_request_resources(dev, phy);
                if (ret)
                        return ret;
+       } else if (ACPI_HANDLE(&dev->dev)) {
+               ret = st33zp24_spi_acpi_request_resources(phy);
+               if (ret)
+                       return ret;
        }
 
        phy->latency = st33zp24_spi_evaluate_latency(phy);
@@ -362,6 +404,12 @@ static const struct of_device_id of_st33zp24_spi_match[] = {
 };
 MODULE_DEVICE_TABLE(of, of_st33zp24_spi_match);
 
+static const struct acpi_device_id st33zp24_spi_acpi_match[] = {
+       {"SMO3324"},
+       {}
+};
+MODULE_DEVICE_TABLE(acpi, st33zp24_spi_acpi_match);
+
 static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend,
                         st33zp24_pm_resume);
 
@@ -370,6 +418,7 @@ static struct spi_driver st33zp24_spi_driver = {
                .name = TPM_ST33_SPI,
                .pm = &st33zp24_spi_ops,
                .of_match_table = of_match_ptr(of_st33zp24_spi_match),
+               .acpi_match_table = ACPI_PTR(st33zp24_spi_acpi_match),
        },
        .probe = st33zp24_spi_probe,
        .remove = st33zp24_spi_remove,