source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P) := s5p samsung
+plat-$(CONFIG_PLAT_S5P) := samsung
plat-$(CONFIG_PLAT_SPEAR) := spear
plat-$(CONFIG_PLAT_VERSATILE) := versatile
help
Common setup code for FIMD0.
-config EXYNOS4_DEV_SYSMMU
+config EXYNOS_DEV_SYSMMU
bool
help
- Common setup code for SYSTEM MMU in EXYNOS4
+ Common setup code for SYSTEM MMU in EXYNOS platforms
config EXYNOS4_DEV_DWMCI
bool
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_BACKLIGHT
+ select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
select EXYNOS4_DEV_DMA
- select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
+ select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
+ select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
+ select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
+obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
}
-static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
}
return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
}
+int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable);
+}
+
static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 14),
}, {
- .name = "SYSMMU_MDMA",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1),
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(tv, 2),
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3),
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(rot, 4),
.enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 5),
+ .ctrlbit = (1 << 4),
}, {
- .name = "SYSMMU_FIMC0",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc0, 5),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 7),
}, {
- .name = "SYSMMU_FIMC1",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc1, 6),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 8),
}, {
- .name = "SYSMMU_FIMC2",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc2, 7),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "SYSMMU_FIMC3",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimc3, 8),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 10),
}, {
- .name = "SYSMMU_JPEG",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "SYSMMU_FIMD0",
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimd0, 10),
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_FIMD1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_PCIe",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "SYSMMU_G2D",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "SYSMMU_ROTATOR",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_TV",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_MFC_L",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "SYSMMU_MFC_R",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
}
};
extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
#endif /* __ASM_ARCH_CLOCK_H */
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
#include "common.h"
#include "clock-exynos4.h"
.devname = "exynos4-fb.1",
.enable = exynos4_clk_ip_lcd1_ctrl,
.ctrlbit = (1 << 0),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(2d, 14),
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(fimd1, 11),
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 4),
},
};
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
#include "common.h"
#include "clock-exynos4.h"
};
#endif
+static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
+}
+
+static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
+}
+
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
[1] = &exynos4_clk_mout_mpll.clk,
};
static struct clk init_clocks_off[] = {
- /* nothing here yet */
+ {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(2d, 14),
+ .enable = exynos4_clk_ip_dmc_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = exynos4212_clk_ip_isp0_ctrl,
+ .ctrlbit = (7 << 8),
+ }, {
+ .name = SYSMMU_CLOCK_NAME2,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = exynos4212_clk_ip_isp1_ctrl,
+ .ctrlbit = (1 << 4),
+ }
};
#ifdef CONFIG_PM_SLEEP
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
}
+static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
+}
+
static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
}
+static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable);
+}
+
+static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable);
+}
+
+static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
+}
+
/* Core list of CMU_CPU side */
static struct clksrc_clk exynos5_clk_mout_apll = {
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 14),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
+ .enable = &exynos5_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1),
+ .enable = &exynos5_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(tv, 2),
+ .enable = &exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 9)
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3),
+ .enable = &exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(rot, 4),
+ .enable = &exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 6)
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc0, 5),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc1, 6),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc2, 7),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(gsc3, 8),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = &exynos5_clk_ip_isp0_ctrl,
+ .ctrlbit = (0x3F << 8),
+ }, {
+ .name = SYSMMU_CLOCK_NAME2,
+ .devname = SYSMMU_CLOCK_DEVNAME(isp, 9),
+ .enable = &exynos5_clk_ip_isp1_ctrl,
+ .ctrlbit = (0xF << 4),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(camif0, 12),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(camif1, 13),
+ .enable = &exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = SYSMMU_CLOCK_NAME,
+ .devname = SYSMMU_CLOCK_DEVNAME(2d, 14),
+ .enable = &exynos5_clk_ip_acp_ctrl,
+ .ctrlbit = (1 << 7)
}
};
-/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
+/* linux/arch/arm/mach-exynos/dev-sysmmu.c
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - System MMU support
+ * EXYNOS - System MMU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/export.h>
+
+#include <plat/cpu.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/sysmmu.h>
-#include <plat/s5p-clock.h>
-
-/* These names must be equal to the clock names in mach-exynos4/clock.c */
-const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
- "SYSMMU_MDMA" ,
- "SYSMMU_SSS" ,
- "SYSMMU_FIMC0" ,
- "SYSMMU_FIMC1" ,
- "SYSMMU_FIMC2" ,
- "SYSMMU_FIMC3" ,
- "SYSMMU_JPEG" ,
- "SYSMMU_FIMD0" ,
- "SYSMMU_FIMD1" ,
- "SYSMMU_PCIe" ,
- "SYSMMU_G2D" ,
- "SYSMMU_ROTATOR",
- "SYSMMU_MDMA2" ,
- "SYSMMU_TV" ,
- "SYSMMU_MFC_L" ,
- "SYSMMU_MFC_R" ,
-};
-static struct resource exynos4_sysmmu_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA,
- .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SYSMMU_MDMA0_0,
- .end = IRQ_SYSMMU_MDMA0_0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = EXYNOS4_PA_SYSMMU_SSS,
- .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [3] = {
- .start = IRQ_SYSMMU_SSS_0,
- .end = IRQ_SYSMMU_SSS_0,
- .flags = IORESOURCE_IRQ,
- },
- [4] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC0,
- .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [5] = {
- .start = IRQ_SYSMMU_FIMC0_0,
- .end = IRQ_SYSMMU_FIMC0_0,
- .flags = IORESOURCE_IRQ,
- },
- [6] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC1,
- .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [7] = {
- .start = IRQ_SYSMMU_FIMC1_0,
- .end = IRQ_SYSMMU_FIMC1_0,
- .flags = IORESOURCE_IRQ,
- },
- [8] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC2,
- .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [9] = {
- .start = IRQ_SYSMMU_FIMC2_0,
- .end = IRQ_SYSMMU_FIMC2_0,
- .flags = IORESOURCE_IRQ,
- },
- [10] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC3,
- .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [11] = {
- .start = IRQ_SYSMMU_FIMC3_0,
- .end = IRQ_SYSMMU_FIMC3_0,
- .flags = IORESOURCE_IRQ,
- },
- [12] = {
- .start = EXYNOS4_PA_SYSMMU_JPEG,
- .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [13] = {
- .start = IRQ_SYSMMU_JPEG_0,
- .end = IRQ_SYSMMU_JPEG_0,
- .flags = IORESOURCE_IRQ,
- },
- [14] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD0,
- .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [15] = {
- .start = IRQ_SYSMMU_LCD0_M0_0,
- .end = IRQ_SYSMMU_LCD0_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [16] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD1,
- .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [17] = {
- .start = IRQ_SYSMMU_LCD1_M1_0,
- .end = IRQ_SYSMMU_LCD1_M1_0,
- .flags = IORESOURCE_IRQ,
- },
- [18] = {
- .start = EXYNOS4_PA_SYSMMU_PCIe,
- .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [19] = {
- .start = IRQ_SYSMMU_PCIE_0,
- .end = IRQ_SYSMMU_PCIE_0,
- .flags = IORESOURCE_IRQ,
- },
- [20] = {
- .start = EXYNOS4_PA_SYSMMU_G2D,
- .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [21] = {
- .start = IRQ_SYSMMU_2D_0,
- .end = IRQ_SYSMMU_2D_0,
- .flags = IORESOURCE_IRQ,
- },
- [22] = {
- .start = EXYNOS4_PA_SYSMMU_ROTATOR,
- .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [23] = {
- .start = IRQ_SYSMMU_ROTATOR_0,
- .end = IRQ_SYSMMU_ROTATOR_0,
- .flags = IORESOURCE_IRQ,
- },
- [24] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA2,
- .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [25] = {
- .start = IRQ_SYSMMU_MDMA1_0,
- .end = IRQ_SYSMMU_MDMA1_0,
- .flags = IORESOURCE_IRQ,
- },
- [26] = {
- .start = EXYNOS4_PA_SYSMMU_TV,
- .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [27] = {
- .start = IRQ_SYSMMU_TV_M0_0,
- .end = IRQ_SYSMMU_TV_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [28] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_L,
- .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [29] = {
- .start = IRQ_SYSMMU_MFC_M0_0,
- .end = IRQ_SYSMMU_MFC_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [30] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_R,
- .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [31] = {
- .start = IRQ_SYSMMU_MFC_M1_0,
- .end = IRQ_SYSMMU_MFC_M1_0,
- .flags = IORESOURCE_IRQ,
- },
-};
+static u64 exynos_sysmmu_dma_mask = DMA_BIT_MASK(32);
+
+#define SYSMMU_PLATFORM_DEVICE(ipname, devid) \
+static struct sysmmu_platform_data platdata_##ipname = { \
+ .dbgname = #ipname, \
+}; \
+struct platform_device SYSMMU_PLATDEV(ipname) = \
+{ \
+ .name = SYSMMU_DEVNAME_BASE, \
+ .id = devid, \
+ .dev = { \
+ .dma_mask = &exynos_sysmmu_dma_mask, \
+ .coherent_dma_mask = DMA_BIT_MASK(32), \
+ .platform_data = &platdata_##ipname, \
+ }, \
+}
+
+SYSMMU_PLATFORM_DEVICE(mfc_l, 0);
+SYSMMU_PLATFORM_DEVICE(mfc_r, 1);
+SYSMMU_PLATFORM_DEVICE(tv, 2);
+SYSMMU_PLATFORM_DEVICE(jpeg, 3);
+SYSMMU_PLATFORM_DEVICE(rot, 4);
+SYSMMU_PLATFORM_DEVICE(fimc0, 5); /* fimc* and gsc* exist exclusively */
+SYSMMU_PLATFORM_DEVICE(fimc1, 6);
+SYSMMU_PLATFORM_DEVICE(fimc2, 7);
+SYSMMU_PLATFORM_DEVICE(fimc3, 8);
+SYSMMU_PLATFORM_DEVICE(gsc0, 5);
+SYSMMU_PLATFORM_DEVICE(gsc1, 6);
+SYSMMU_PLATFORM_DEVICE(gsc2, 7);
+SYSMMU_PLATFORM_DEVICE(gsc3, 8);
+SYSMMU_PLATFORM_DEVICE(isp, 9);
+SYSMMU_PLATFORM_DEVICE(fimd0, 10);
+SYSMMU_PLATFORM_DEVICE(fimd1, 11);
+SYSMMU_PLATFORM_DEVICE(camif0, 12);
+SYSMMU_PLATFORM_DEVICE(camif1, 13);
+SYSMMU_PLATFORM_DEVICE(2d, 14);
+
+#define SYSMMU_RESOURCE_NAME(core, ipname) sysmmures_##core##_##ipname
+
+#define SYSMMU_RESOURCE(core, ipname) \
+ static struct resource SYSMMU_RESOURCE_NAME(core, ipname)[] __initdata =
+
+#define DEFINE_SYSMMU_RESOURCE(core, mem, irq) \
+ DEFINE_RES_MEM_NAMED(core##_PA_SYSMMU_##mem, SZ_4K, #mem), \
+ DEFINE_RES_IRQ_NAMED(core##_IRQ_SYSMMU_##irq##_0, #mem)
+
+#define SYSMMU_RESOURCE_DEFINE(core, ipname, mem, irq) \
+ SYSMMU_RESOURCE(core, ipname) { \
+ DEFINE_SYSMMU_RESOURCE(core, mem, irq) \
+ }
-struct platform_device exynos4_device_sysmmu = {
- .name = "s5p-sysmmu",
- .id = 32,
- .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource),
- .resource = exynos4_sysmmu_resource,
+struct sysmmu_resource_map {
+ struct platform_device *pdev;
+ struct resource *res;
+ u32 rnum;
+ struct device *pdd;
+ char *clocknames;
};
-EXPORT_SYMBOL(exynos4_device_sysmmu);
-static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
-{
- sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
- if (IS_ERR(sysmmu_clk[ips]))
- sysmmu_clk[ips] = NULL;
- else
- clk_put(sysmmu_clk[ips]);
+#define SYSMMU_RESOURCE_MAPPING(core, ipname, resname) { \
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME, \
}
-void sysmmu_clk_enable(sysmmu_ips ips)
-{
- if (sysmmu_clk[ips])
- clk_enable(sysmmu_clk[ips]);
+#define SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata) { \
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \
+}
+
+#ifdef CONFIG_EXYNOS_DEV_PD
+#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) { \
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME, \
+ .pdd = &exynos##core##_device_pd[pd].dev, \
+}
+
+#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) {\
+ .pdev = &SYSMMU_PLATDEV(ipname), \
+ .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \
+ .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+ .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \
+ .pdd = &exynos##core##_device_pd[pd].dev, \
}
+#else
+#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) \
+ SYSMMU_RESOURCE_MAPPING(core, ipname, resname)
+#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) \
+ SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata)
+
+#endif /* CONFIG_EXYNOS_DEV_PD */
+
+#ifdef CONFIG_ARCH_EXYNOS4
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc0, FIMC0, FIMC0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc1, FIMC1, FIMC1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc2, FIMC2, FIMC2);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc3, FIMC3, FIMC3);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, jpeg, JPEG, JPEG);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d, G2D, 2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, tv, TV, TV_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d_acp, 2D_ACP, 2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, rot, ROTATOR, ROTATOR);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd0, FIMD0, LCD0_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd1, FIMD1, LCD1_M1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite0, FIMC_LITE0, FIMC_LITE0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite1, FIMC_LITE1, FIMC_LITE1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_r, MFC_R, MFC_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_l, MFC_L, MFC_M1);
+SYSMMU_RESOURCE(EXYNOS4, isp) {
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_ISP, FIMC_ISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_DRC, FIMC_DRC),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_FD, FIMC_FD),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS4, ISPCPU, FIMC_CX),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc0, fimc0, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc1, fimc1, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc2, fimc2, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimc3, fimc3, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, tv, tv, PD_TV),
+ SYSMMU_RESOURCE_MAPPING_PD(4, mfc_r, mfc_r, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_PD(4, mfc_l, mfc_l, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_PD(4, rot, rot, PD_LCD0),
+ SYSMMU_RESOURCE_MAPPING_PD(4, jpeg, jpeg, PD_CAM),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimd0, fimd0, PD_LCD0),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4210[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING_PD(4, 2d, 2d, PD_LCD0),
+ SYSMMU_RESOURCE_MAPPING_PD(4, fimd1, fimd1, PD_LCD1),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4212[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING(4, 2d, 2d_acp),
+ SYSMMU_RESOURCE_MAPPING_PD(4, camif0, flite0, PD_ISP),
+ SYSMMU_RESOURCE_MAPPING_PD(4, camif1, flite1, PD_ISP),
+ SYSMMU_RESOURCE_MAPPING_PD(4, isp, isp, PD_ISP),
+};
+#endif /* CONFIG_ARCH_EXYNOS4 */
-void sysmmu_clk_disable(sysmmu_ips ips)
+#ifdef CONFIG_ARCH_EXYNOS5
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, jpeg, JPEG, JPEG);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, fimd1, FIMD1, FIMD1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, 2d, 2D, 2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, rot, ROTATOR, ROTATOR);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, tv, TV, TV);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite0, LITE0, LITE0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite1, LITE1, LITE1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc0, GSC0, GSC0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc1, GSC1, GSC1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc2, GSC2, GSC2);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc3, GSC3, GSC3);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_r, MFC_R, MFC_R);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_l, MFC_L, MFC_L);
+SYSMMU_RESOURCE(EXYNOS5, isp) {
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISP, ISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, DRC, DRC),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, FD, FD),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISPCPU, MCUISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERC, SCALERCISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERP, SCALERPISP),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, ODC, ODC),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS0, DIS0),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS1, DIS1),
+ DEFINE_SYSMMU_RESOURCE(EXYNOS5, 3DNR, 3DNR),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap5[] __initdata = {
+ SYSMMU_RESOURCE_MAPPING(5, jpeg, jpeg),
+ SYSMMU_RESOURCE_MAPPING(5, fimd1, fimd1),
+ SYSMMU_RESOURCE_MAPPING(5, 2d, 2d),
+ SYSMMU_RESOURCE_MAPPING(5, rot, rot),
+ SYSMMU_RESOURCE_MAPPING_PD(5, tv, tv, PD_DISP1),
+ SYSMMU_RESOURCE_MAPPING_PD(5, camif0, flite0, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, camif1, flite1, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc0, gsc0, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc1, gsc1, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc2, gsc2, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, gsc3, gsc3, PD_GSCL),
+ SYSMMU_RESOURCE_MAPPING_PD(5, mfc_r, mfc_r, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_PD(5, mfc_l, mfc_l, PD_MFC),
+ SYSMMU_RESOURCE_MAPPING_MCPD(5, isp, isp, PD_ISP, mc_platdata),
+};
+#endif /* CONFIG_ARCH_EXYNOS5 */
+
+static int __init init_sysmmu_platform_device(void)
{
- if (sysmmu_clk[ips])
- clk_disable(sysmmu_clk[ips]);
+ int i, j;
+ struct sysmmu_resource_map *resmap[2] = {NULL, NULL};
+ int nmap[2] = {0, 0};
+
+#ifdef CONFIG_ARCH_EXYNOS5
+ if (soc_is_exynos5250()) {
+ resmap[0] = sysmmu_resmap5;
+ nmap[0] = ARRAY_SIZE(sysmmu_resmap5);
+ nmap[1] = 0;
+ }
+#endif
+
+#ifdef CONFIG_ARCH_EXYNOS4
+ if (resmap[0] == NULL) {
+ resmap[0] = sysmmu_resmap4;
+ nmap[0] = ARRAY_SIZE(sysmmu_resmap4);
+ }
+
+ if (soc_is_exynos4210()) {
+ resmap[1] = sysmmu_resmap4210;
+ nmap[1] = ARRAY_SIZE(sysmmu_resmap4210);
+ }
+
+ if (soc_is_exynos4412() || soc_is_exynos4212()) {
+ resmap[1] = sysmmu_resmap4212;
+ nmap[1] = ARRAY_SIZE(sysmmu_resmap4212);
+ }
+#endif
+
+ for (j = 0; j < 2; j++) {
+ for (i = 0; i < nmap[j]; i++) {
+ struct sysmmu_resource_map *map;
+ struct sysmmu_platform_data *platdata;
+
+ map = &resmap[j][i];
+
+ map->pdev->dev.parent = map->pdd;
+
+ platdata = map->pdev->dev.platform_data;
+ platdata->clockname = map->clocknames;
+
+ if (platform_device_add_resources(map->pdev, map->res,
+ map->rnum)) {
+ pr_err("%s: Failed to add device resources for "
+ "%s.%d\n", __func__,
+ map->pdev->name, map->pdev->id);
+ continue;
+ }
+
+ if (platform_device_register(map->pdev)) {
+ pr_err("%s: Failed to register %s.%d\n",
+ __func__, map->pdev->name,
+ map->pdev->id);
+ }
+ }
+ }
+
+ return 0;
}
+arch_initcall(init_sysmmu_platform_device);
#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE0_0 COMBINER_IRQ(16, 0)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE1_0 COMBINER_IRQ(16, 1)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_ISP_0 COMBINER_IRQ(16, 2)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_DRC_0 COMBINER_IRQ(16, 3)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_FD_0 COMBINER_IRQ(16, 4)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_CX_0 COMBINER_IRQ(16, 5)
+
#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
#define IRQ_PMU EXYNOS4_IRQ_PMU
-#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0
-#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0
-#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0
-#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0
-#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0
-#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0
-#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0
-#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0
-
-#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0
-#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0
-#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0
-#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0
-#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0
-#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0
-#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0
-#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0
-
#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM
#define EXYNOS5_PA_PDMA1 0x121B0000
#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
+#define EXYNOS4_PA_SYSMMU_2D_ACP 0x10A40000
#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000
#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000
#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000
#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000
#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000
#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000
+#define EXYNOS4_PA_SYSMMU_FIMC_ISP 0x12260000
+#define EXYNOS4_PA_SYSMMU_FIMC_DRC 0x12270000
+#define EXYNOS4_PA_SYSMMU_FIMC_FD 0x122A0000
+#define EXYNOS4_PA_SYSMMU_ISPCPU 0x122B0000
+#define EXYNOS4_PA_SYSMMU_FIMC_LITE0 0x123B0000
+#define EXYNOS4_PA_SYSMMU_FIMC_LITE1 0x123C0000
#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000
#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000
#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000
#define EXYNOS4_PA_SYSMMU_TV 0x12E20000
#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
+
+#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000
+#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000
+#define EXYNOS5_PA_SYSMMU_2D 0x10A60000
+#define EXYNOS5_PA_SYSMMU_MFC_L 0x11200000
+#define EXYNOS5_PA_SYSMMU_MFC_R 0x11210000
+#define EXYNOS5_PA_SYSMMU_ROTATOR 0x11D40000
+#define EXYNOS5_PA_SYSMMU_MDMA2 0x11D50000
+#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000
+#define EXYNOS5_PA_SYSMMU_IOP 0x12360000
+#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000
+#define EXYNOS5_PA_SYSMMU_GPS 0x12630000
+#define EXYNOS5_PA_SYSMMU_ISP 0x13260000
+#define EXYNOS5_PA_SYSMMU_DRC 0x12370000
+#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000
+#define EXYNOS5_PA_SYSMMU_SCALERP 0x13290000
+#define EXYNOS5_PA_SYSMMU_FD 0x132A0000
+#define EXYNOS5_PA_SYSMMU_ISPCPU 0x132B0000
+#define EXYNOS5_PA_SYSMMU_ODC 0x132C0000
+#define EXYNOS5_PA_SYSMMU_DIS0 0x132D0000
+#define EXYNOS5_PA_SYSMMU_DIS1 0x132E0000
+#define EXYNOS5_PA_SYSMMU_3DNR 0x132F0000
+#define EXYNOS5_PA_SYSMMU_LITE0 0x13C40000
+#define EXYNOS5_PA_SYSMMU_LITE1 0x13C50000
+#define EXYNOS5_PA_SYSMMU_GSC0 0x13E80000
+#define EXYNOS5_PA_SYSMMU_GSC1 0x13E90000
+#define EXYNOS5_PA_SYSMMU_GSC2 0x13EA0000
+#define EXYNOS5_PA_SYSMMU_GSC3 0x13EB0000
+#define EXYNOS5_PA_SYSMMU_FIMD1 0x14640000
+#define EXYNOS5_PA_SYSMMU_TV 0x14650000
+
#define EXYNOS4_PA_SPI0 0x13920000
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
#define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800)
#define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900)
+#define EXYNOS4_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x18800)
+#define EXYNOS4_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x18804)
+
#define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */
#define EXYNOS4_APLLCON0_ENABLE_SHIFT (31)
#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
+#define EXYNOS5_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x0C800)
+#define EXYNOS5_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x0C804)
#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928)
#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C)
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - System MMU register
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SYSMMU_H
-#define __ASM_ARCH_REGS_SYSMMU_H __FILE__
-
-#define S5P_MMU_CTRL 0x000
-#define S5P_MMU_CFG 0x004
-#define S5P_MMU_STATUS 0x008
-#define S5P_MMU_FLUSH 0x00C
-#define S5P_PT_BASE_ADDR 0x014
-#define S5P_INT_STATUS 0x018
-#define S5P_INT_CLEAR 0x01C
-#define S5P_PAGE_FAULT_ADDR 0x024
-#define S5P_AW_FAULT_ADDR 0x028
-#define S5P_AR_FAULT_ADDR 0x02C
-#define S5P_DEFAULT_SLAVE_ADDR 0x030
-
-#endif /* __ASM_ARCH_REGS_SYSMMU_H */
-/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Samsung sysmmu driver for EXYNOS4
+ * EXYNOS - System MMU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_ARCH_SYSMMU_H
-#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
-
-enum exynos4_sysmmu_ips {
- SYSMMU_MDMA,
- SYSMMU_SSS,
- SYSMMU_FIMC0,
- SYSMMU_FIMC1,
- SYSMMU_FIMC2,
- SYSMMU_FIMC3,
- SYSMMU_JPEG,
- SYSMMU_FIMD0,
- SYSMMU_FIMD1,
- SYSMMU_PCIe,
- SYSMMU_G2D,
- SYSMMU_ROTATOR,
- SYSMMU_MDMA2,
- SYSMMU_TV,
- SYSMMU_MFC_L,
- SYSMMU_MFC_R,
- EXYNOS4_SYSMMU_TOTAL_IPNUM,
+ */
+
+#ifndef _ARM_MACH_EXYNOS_SYSMMU_H_
+#define _ARM_MACH_EXYNOS_SYSMMU_H_
+
+struct sysmmu_platform_data {
+ char *dbgname;
+ /* comma(,) separated list of clock names for clock gating */
+ char *clockname;
};
-#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM
+#define SYSMMU_DEVNAME_BASE "exynos-sysmmu"
+
+#define SYSMMU_CLOCK_NAME "sysmmu"
+#define SYSMMU_CLOCK_NAME2 "sysmmu_mc"
+
+#ifdef CONFIG_EXYNOS_DEV_SYSMMU
+#include <linux/device.h>
+struct platform_device;
+
+#define SYSMMU_PLATDEV(ipname) exynos_device_sysmmu_##ipname
+
+extern struct platform_device SYSMMU_PLATDEV(mfc_l);
+extern struct platform_device SYSMMU_PLATDEV(mfc_r);
+extern struct platform_device SYSMMU_PLATDEV(tv);
+extern struct platform_device SYSMMU_PLATDEV(jpeg);
+extern struct platform_device SYSMMU_PLATDEV(rot);
+extern struct platform_device SYSMMU_PLATDEV(fimc0);
+extern struct platform_device SYSMMU_PLATDEV(fimc1);
+extern struct platform_device SYSMMU_PLATDEV(fimc2);
+extern struct platform_device SYSMMU_PLATDEV(fimc3);
+extern struct platform_device SYSMMU_PLATDEV(gsc0);
+extern struct platform_device SYSMMU_PLATDEV(gsc1);
+extern struct platform_device SYSMMU_PLATDEV(gsc2);
+extern struct platform_device SYSMMU_PLATDEV(gsc3);
+extern struct platform_device SYSMMU_PLATDEV(isp);
+extern struct platform_device SYSMMU_PLATDEV(fimd0);
+extern struct platform_device SYSMMU_PLATDEV(fimd1);
+extern struct platform_device SYSMMU_PLATDEV(camif0);
+extern struct platform_device SYSMMU_PLATDEV(camif1);
+extern struct platform_device SYSMMU_PLATDEV(2d);
-extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
+#ifdef CONFIG_IOMMU_API
+static inline void platform_set_sysmmu(
+ struct device *sysmmu, struct device *dev)
+{
+ dev->archdata.iommu = sysmmu;
+}
+#endif
-typedef enum exynos4_sysmmu_ips sysmmu_ips;
+#else /* !CONFIG_EXYNOS_DEV_SYSMMU */
+#define platform_set_sysmmu(dev, sysmmu) do { } while (0)
+#endif
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
-void sysmmu_clk_enable(sysmmu_ips ips);
-void sysmmu_clk_disable(sysmmu_ips ips);
+#define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id)
-#endif /* __ASM_ARM_ARCH_SYSMMU_H */
+#endif /* _ARM_MACH_EXYNOS_SYSMMU_H_ */
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
- &exynos4_device_sysmmu,
&samsung_asoc_dma,
&armlex4210_smsc911x,
&exynos4_device_ahci,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_spdif,
- &exynos4_device_sysmmu,
&samsung_asoc_dma,
&samsung_asoc_idma,
&s5p_device_fimd0,
+++ /dev/null
-# arch/arm/plat-s5p/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-config PLAT_S5P
- bool
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
- default y
- select ARM_VIC if !ARCH_EXYNOS
- select ARM_GIC if ARCH_EXYNOS
- select GIC_NON_BANKED if ARCH_EXYNOS4
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select S3C_GPIO_TRACK
- select S5P_GPIO_DRVSTR
- select SAMSUNG_GPIOLIB_4BIT
- select PLAT_SAMSUNG
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_VIC_TIMER
- help
- Base platform code for Samsung's S5P series SoC.
-
-config S5P_EXT_INT
- bool
- help
- Use the external interrupts (other than GPIO interrupts.)
- Note: Do not choose this for S5P6440 and S5P6450.
-
-config S5P_GPIO_INT
- bool
- help
- Common code for the GPIO interrupts (other than external interrupts.)
-
-config S5P_HRT
- bool
- select SAMSUNG_DEV_PWM
- help
- Use the High Resolution timer support
-
-config S5P_DEV_UART
- def_bool y
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
-
-config S5P_PM
- bool
- help
- Common code for power management support on S5P and newer SoCs
- Note: Do not select this for S5P6440 and S5P6450.
-
-comment "System MMU"
-
-config S5P_SYSTEM_MMU
- bool "S5P SYSTEM MMU"
- depends on ARCH_EXYNOS4
- help
- Say Y here if you want to enable System MMU
-
-config S5P_SLEEP
- bool
- help
- Internal config node to apply common S5P sleep management code.
- Can be selected by S5P and newer SoCs with similar sleep procedure.
-
-config S5P_DEV_FIMC0
- bool
- help
- Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
- bool
- help
- Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
- bool
- help
- Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
- bool
- help
- Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_JPEG
- bool
- help
- Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_G2D
- bool
- help
- Compile in platform device definitions for G2D device
-
-config S5P_DEV_FIMD0
- bool
- help
- Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_I2C_HDMIPHY
- bool
- help
- Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_MFC
- bool
- help
- Compile in platform device definitions for MFC
-
-config S5P_DEV_ONENAND
- bool
- help
- Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_CSIS0
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
- bool
- help
- Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_TV
- bool
- help
- Compile in platform device definition for TV interface
-
-config S5P_DEV_USB_EHCI
- bool
- help
- Compile in platform device definition for USB EHCI
-
-config S5P_SETUP_MIPIPHY
- bool
- help
- Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
+++ /dev/null
-# arch/arm/plat-s5p/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += clock.o
-obj-y += irq.o
-obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
-obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
-obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o
-obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o
-obj-$(CONFIG_S5P_SLEEP) += sleep.o
-obj-$(CONFIG_S5P_HRT) += s5p-time.o
-
-# devices
-
-obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
-obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
+++ /dev/null
-/* linux/arch/arm/plat-s5p/clock.c
- *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <asm/div64.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p-clock.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * clk_ext_xtal_mux.
-*/
-struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
- .id = -1,
-};
-
-struct clk clk_xusbxti = {
- .name = "xusbxti",
- .id = -1,
-};
-
-struct clk s5p_clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-/* 48MHz USB Phy clock output */
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
-};
-
-/* APLL clock output
- * No need .ctrlbit, this is always on
-*/
-struct clk clk_fout_apll = {
- .name = "fout_apll",
- .id = -1,
-};
-
-/* BPLL clock output */
-
-struct clk clk_fout_bpll = {
- .name = "fout_bpll",
- .id = -1,
-};
-
-/* CPLL clock output */
-
-struct clk clk_fout_cpll = {
- .name = "fout_cpll",
- .id = -1,
-};
-
-/* MPLL clock output
- * No need .ctrlbit, this is always on
-*/
-struct clk clk_fout_mpll = {
- .name = "fout_mpll",
- .id = -1,
-};
-
-/* EPLL clock output */
-struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
- .ctrlbit = (1 << 31),
-};
-
-/* DPLL clock output */
-struct clk clk_fout_dpll = {
- .name = "fout_dpll",
- .id = -1,
- .ctrlbit = (1 << 31),
-};
-
-/* VPLL clock output */
-struct clk clk_fout_vpll = {
- .name = "fout_vpll",
- .id = -1,
- .ctrlbit = (1 << 31),
-};
-
-/* Possible clock sources for APLL Mux */
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-/* Possible clock sources for BPLL Mux */
-static struct clk *clk_src_bpll_list[] = {
- [0] = &clk_fin_bpll,
- [1] = &clk_fout_bpll,
-};
-
-struct clksrc_sources clk_src_bpll = {
- .sources = clk_src_bpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_bpll_list),
-};
-
-/* Possible clock sources for CPLL Mux */
-static struct clk *clk_src_cpll_list[] = {
- [0] = &clk_fin_cpll,
- [1] = &clk_fout_cpll,
-};
-
-struct clksrc_sources clk_src_cpll = {
- .sources = clk_src_cpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_cpll_list),
-};
-
-/* Possible clock sources for MPLL Mux */
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-/* Possible clock sources for EPLL Mux */
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-/* Possible clock sources for DPLL Mux */
-static struct clk *clk_src_dpll_list[] = {
- [0] = &clk_fin_dpll,
- [1] = &clk_fout_dpll,
-};
-
-struct clksrc_sources clk_src_dpll = {
- .sources = clk_src_dpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_dpll_list),
-};
-
-struct clk clk_vpll = {
- .name = "vpll",
- .id = -1,
-};
-
-int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
- con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
- __raw_writel(con, reg);
- return 0;
-}
-
-int s5p_epll_enable(struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
- if (enable)
- __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
- else
- __raw_writel(epll_con, S5P_EPLL_CON);
-
- return 0;
-}
-
-unsigned long s5p_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-int s5p_spdif_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *pclk;
- int ret;
-
- pclk = clk_get_parent(clk);
- if (IS_ERR(pclk))
- return -EINVAL;
-
- ret = pclk->ops->set_rate(pclk, rate);
- clk_put(pclk);
-
- return ret;
-}
-
-unsigned long s5p_spdif_get_rate(struct clk *clk)
-{
- struct clk *pclk;
- int rate;
-
- pclk = clk_get_parent(clk);
- if (IS_ERR(pclk))
- return -EINVAL;
-
- rate = pclk->ops->get_rate(pclk);
- clk_put(pclk);
-
- return rate;
-}
-
-struct clk_ops s5p_sclk_spdif_ops = {
- .set_rate = s5p_spdif_set_rate,
- .get_rate = s5p_spdif_get_rate,
-};
-
-static struct clk *s5p_clks[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_48m,
- &s5p_clk_27m,
- &clk_fout_apll,
- &clk_fout_mpll,
- &clk_fout_epll,
- &clk_fout_dpll,
- &clk_fout_vpll,
- &clk_vpll,
- &clk_xusbxti,
-};
-
-void __init s5p_register_clocks(unsigned long xtal_freq)
-{
- int ret;
-
- clk_ext_xtal_mux.rate = xtal_freq;
-
- ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
- if (ret > 0)
- printk(KERN_ERR "Failed to register s5p clocks\n");
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-mfc.c
- *
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-#include <plat/mfc.h>
-
-struct s5p_mfc_reserved_mem {
- phys_addr_t base;
- unsigned long size;
- struct device *dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize)
-{
- int i;
-
- s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
- s5p_mfc_mem[0].base = rbase;
- s5p_mfc_mem[0].size = rsize;
-
- s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
- s5p_mfc_mem[1].base = lbase;
- s5p_mfc_mem[1].size = lsize;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (memblock_remove(area->base, area->size)) {
- printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- area->base = 0;
- }
- }
-}
-
-static int __init s5p_mfc_memory_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (!area->base)
- continue;
-
- if (dma_declare_coherent_memory(area->dev, area->base,
- area->base, area->size,
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
- printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- }
- return 0;
-}
-device_initcall(s5p_mfc_memory_init);
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-uart.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Base S5P UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
- /* Serial port registrations */
-
-static struct resource s5p_uart0_resource[] = {
- [0] = {
- .start = S5P_PA_UART0,
- .end = S5P_PA_UART0 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART0,
- .end = IRQ_UART0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart1_resource[] = {
- [0] = {
- .start = S5P_PA_UART1,
- .end = S5P_PA_UART1 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART1,
- .end = IRQ_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart2_resource[] = {
- [0] = {
- .start = S5P_PA_UART2,
- .end = S5P_PA_UART2 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART2,
- .end = IRQ_UART2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5p_uart3_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
- [0] = {
- .start = S5P_PA_UART3,
- .end = S5P_PA_UART3 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART3,
- .end = IRQ_UART3,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct resource s5p_uart4_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
- [0] = {
- .start = S5P_PA_UART4,
- .end = S5P_PA_UART4 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART4,
- .end = IRQ_UART4,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct resource s5p_uart5_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
- [0] = {
- .start = S5P_PA_UART5,
- .end = S5P_PA_UART5 + S5P_SZ_UART - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART5,
- .end = IRQ_UART5,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
- [0] = {
- .resources = s5p_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart0_resource),
- },
- [1] = {
- .resources = s5p_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart1_resource),
- },
- [2] = {
- .resources = s5p_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart2_resource),
- },
- [3] = {
- .resources = s5p_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart3_resource),
- },
- [4] = {
- .resources = s5p_uart4_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart4_resource),
- },
- [5] = {
- .resources = s5p_uart5_resource,
- .nr_resources = ARRAY_SIZE(s5p_uart5_resource),
- },
-};
+++ /dev/null
-/* linux/arch/arm/plat-s5p/irq-eint.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/regs-gpio.h>
-
-static inline void s5p_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static inline void s5p_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_maskack(struct irq_data *data)
-{
- /* compiler should in-line these */
- s5p_irq_eint_mask(data);
- s5p_irq_eint_ack(data);
-}
-
-static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-
- if ((0 <= offs) && (offs < 8))
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-
- else if ((8 <= offs) && (offs < 16))
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-
- else if ((16 <= offs) && (offs < 24))
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-
- else if ((24 <= offs) && (offs < 32))
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-
- else
- printk(KERN_ERR "No such irq number %d", offs);
-
- return 0;
-}
-
-static struct irq_chip s5p_irq_eint = {
- .name = "s5p-eint",
- .irq_mask = s5p_irq_eint_mask,
- .irq_unmask = s5p_irq_eint_unmask,
- .irq_mask_ack = s5p_irq_eint_maskack,
- .irq_ack = s5p_irq_eint_ack,
- .irq_set_type = s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/* s5p_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from EINTs 16 to 31. It is designed to be inlined into the specific
- * handler s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void s5p_irq_demux_eint(unsigned int start)
-{
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
- unsigned int irq;
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- s5p_irq_demux_eint(IRQ_EINT(16));
- s5p_irq_demux_eint(IRQ_EINT(24));
-}
-
-static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
-{
- void __iomem *base = irq_data_get_irq_chip_data(data);
-
- s5p_irq_eint_mask(data);
- writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s5p_irq_vic_eint_unmask(struct irq_data *data)
-{
- void __iomem *base = irq_data_get_irq_chip_data(data);
-
- s5p_irq_eint_unmask(data);
- writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
-}
-
-static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_vic_eint_maskack(struct irq_data *data)
-{
- s5p_irq_vic_eint_mask(data);
- s5p_irq_vic_eint_ack(data);
-}
-
-static struct irq_chip s5p_irq_vic_eint = {
- .name = "s5p_vic_eint",
- .irq_mask = s5p_irq_vic_eint_mask,
- .irq_unmask = s5p_irq_vic_eint_unmask,
- .irq_mask_ack = s5p_irq_vic_eint_maskack,
- .irq_ack = s5p_irq_vic_eint_ack,
- .irq_set_type = s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-static int __init s5p_init_irq_eint(void)
-{
- int irq;
-
- for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
- irq_set_chip(irq, &s5p_irq_vic_eint);
-
- for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
- irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
- return 0;
-}
-
-arch_initcall(s5p_init_irq_eint);
+++ /dev/null
-/* linux/arch/arm/plat-s5p/irq-gpioint.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-
-#include <mach/map.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-
-#include <asm/mach/irq.h>
-
-#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u)
-
-#define CON_OFFSET 0x700
-#define MASK_OFFSET 0x900
-#define PEND_OFFSET 0xA00
-#define REG_OFFSET(x) ((x) << 2)
-
-struct s5p_gpioint_bank {
- struct list_head list;
- int start;
- int nr_groups;
- int irq;
- struct samsung_gpio_chip **chips;
- void (*handler)(unsigned int, struct irq_desc *);
-};
-
-static LIST_HEAD(banks);
-
-static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
-{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- struct irq_chip_type *ct = gc->chip_types;
- unsigned int shift = (d->irq - gc->irq_base) << 2;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- type = S5P_IRQ_TYPE_EDGE_RISING;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- type = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- type = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- type = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- type = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
- case IRQ_TYPE_NONE:
- default:
- printk(KERN_WARNING "No irq type\n");
- return -EINVAL;
- }
-
- gc->type_cache &= ~(0x7 << shift);
- gc->type_cache |= type << shift;
- writel(gc->type_cache, gc->reg_base + ct->regs.type);
- return 0;
-}
-
-static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
- int group, pend_offset, mask_offset;
- unsigned int pend, mask;
-
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
-
- for (group = 0; group < bank->nr_groups; group++) {
- struct samsung_gpio_chip *chip = bank->chips[group];
- if (!chip)
- continue;
-
- pend_offset = REG_OFFSET(group);
- pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
- if (!pend)
- continue;
-
- mask_offset = REG_OFFSET(group);
- mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
- pend &= ~mask;
-
- while (pend) {
- int offset = fls(pend) - 1;
- int real_irq = chip->irq_base + offset;
- generic_handle_irq(real_irq);
- pend &= ~BIT(offset);
- }
- }
- chained_irq_exit(chip, desc);
-}
-
-static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
-{
- static int used_gpioint_groups = 0;
- int group = chip->group;
- struct s5p_gpioint_bank *b, *bank = NULL;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
- return -ENOMEM;
-
- list_for_each_entry(b, &banks, list) {
- if (group >= b->start && group < b->start + b->nr_groups) {
- bank = b;
- break;
- }
- }
- if (!bank)
- return -EINVAL;
-
- if (!bank->handler) {
- bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
- bank->nr_groups, GFP_KERNEL);
- if (!bank->chips)
- return -ENOMEM;
-
- irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
- irq_set_handler_data(bank->irq, bank);
- bank->handler = s5p_gpioint_handler;
- printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
- bank->irq);
- }
-
- /*
- * chained GPIO irq has been successfully registered, allocate new gpio
- * int group and assign irq nubmers
- */
- chip->irq_base = S5P_GPIOINT_BASE +
- used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
- used_gpioint_groups++;
-
- bank->chips[group - bank->start] = chip;
-
- gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
- (void __iomem *)GPIO_BASE(chip),
- handle_level_irq);
- if (!gc)
- return -ENOMEM;
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = s5p_gpioint_set_type,
- ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
- ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
- ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
- irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- return 0;
-}
-
-int __init s5p_register_gpio_interrupt(int pin)
-{
- struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
- int offset, group;
- int ret;
-
- if (!my_chip)
- return -EINVAL;
-
- offset = pin - my_chip->chip.base;
- group = my_chip->group;
-
- /* check if the group has been already registered */
- if (my_chip->irq_base)
- return my_chip->irq_base + offset;
-
- /* register gpio group */
- ret = s5p_gpioint_add(my_chip);
- if (ret == 0) {
- my_chip->chip.to_irq = samsung_gpiolib_to_irq;
- printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
- group);
- return my_chip->irq_base + offset;
- }
- return ret;
-}
-
-int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
-{
- struct s5p_gpioint_bank *bank;
-
- bank = kzalloc(sizeof(*bank), GFP_KERNEL);
- if (!bank)
- return -ENOMEM;
-
- bank->start = start;
- bank->nr_groups = nr_groups;
- bank->irq = chain_irq;
-
- list_add_tail(&bank->list, &banks);
- return 0;
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5p/irq-pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/plat-s3c24xx/irq-pm.c,
- * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <plat/cpu.h>
-#include <plat/irqs.h>
-#include <plat/pm.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
- * as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow = 0x00000006L;
-unsigned long s3c_irqwake_eintallow = 0xffffffffL;
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long irqbit;
- unsigned int irq_rtc_tic, irq_rtc_alarm;
-
-#ifdef CONFIG_ARCH_EXYNOS
- if (soc_is_exynos5250()) {
- irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
- } else {
- irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
- }
-#else
- irq_rtc_tic = IRQ_RTC_TIC;
- irq_rtc_alarm = IRQ_RTC_ALARM;
-#endif
-
- if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
- irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
- } else {
- return -ENOENT;
- }
-
- return 0;
-}
-
-static struct sleep_save eint_save[] = {
- SAVE_ITEM(S5P_EINT_CON(0)),
- SAVE_ITEM(S5P_EINT_CON(1)),
- SAVE_ITEM(S5P_EINT_CON(2)),
- SAVE_ITEM(S5P_EINT_CON(3)),
-
- SAVE_ITEM(S5P_EINT_FLTCON(0)),
- SAVE_ITEM(S5P_EINT_FLTCON(1)),
- SAVE_ITEM(S5P_EINT_FLTCON(2)),
- SAVE_ITEM(S5P_EINT_FLTCON(3)),
- SAVE_ITEM(S5P_EINT_FLTCON(4)),
- SAVE_ITEM(S5P_EINT_FLTCON(5)),
- SAVE_ITEM(S5P_EINT_FLTCON(6)),
- SAVE_ITEM(S5P_EINT_FLTCON(7)),
-
- SAVE_ITEM(S5P_EINT_MASK(0)),
- SAVE_ITEM(S5P_EINT_MASK(1)),
- SAVE_ITEM(S5P_EINT_MASK(2)),
- SAVE_ITEM(S5P_EINT_MASK(3)),
-};
-
-int s3c24xx_irq_suspend(void)
-{
- s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
-
- return 0;
-}
-
-void s3c24xx_irq_resume(void)
-{
- s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-}
-
+++ /dev/null
-/* arch/arm/plat-s5p/irq.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-
-void __init s5p_init_irq(u32 *vic, u32 num_vic)
-{
-#ifdef CONFIG_ARM_VIC
- int irq;
-
- /* initialize the VICs */
- for (irq = 0; irq < num_vic; irq++)
- vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
-#endif
-
- s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5p/pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P Power Manager (Suspend-To-RAM) support
- *
- * Based on arch/arm/plat-s3c24xx/pm.c
- * Copyright (c) 2004,2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <plat/pm.h>
-
-#define PFX "s5p pm: "
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
- /* nothing here yet */
-}
-
-void s3c_pm_restore_core(void)
-{
- /* nothing here yet */
-}
-
-void s3c_pm_save_core(void)
-{
- /* nothing here yet */
-}
-
+++ /dev/null
-/* linux/arch/arm/plat-s5p/s5p-time.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P - Common hr-timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-
-#include <asm/smp_twd.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/sched_clock.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-#include <plat/s5p-time.h>
-
-static struct clk *tin_event;
-static struct clk *tin_source;
-static struct clk *tdiv_event;
-static struct clk *tdiv_source;
-static struct clk *timerclk;
-static struct s5p_timer_source timer_source;
-static unsigned long clock_count_per_tick;
-static void s5p_timer_resume(void);
-
-static void s5p_time_stop(enum s5p_timer_mode mode)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case S5P_PWM0:
- tcon &= ~S3C2410_TCON_T0START;
- break;
-
- case S5P_PWM1:
- tcon &= ~S3C2410_TCON_T1START;
- break;
-
- case S5P_PWM2:
- tcon &= ~S3C2410_TCON_T2START;
- break;
-
- case S5P_PWM3:
- tcon &= ~S3C2410_TCON_T3START;
- break;
-
- case S5P_PWM4:
- tcon &= ~S3C2410_TCON_T4START;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- tcnt--;
-
- switch (mode) {
- case S5P_PWM0:
- tcon &= ~(0x0f << 0);
- tcon |= S3C2410_TCON_T0MANUALUPD;
- break;
-
- case S5P_PWM1:
- tcon &= ~(0x0f << 8);
- tcon |= S3C2410_TCON_T1MANUALUPD;
- break;
-
- case S5P_PWM2:
- tcon &= ~(0x0f << 12);
- tcon |= S3C2410_TCON_T2MANUALUPD;
- break;
-
- case S5P_PWM3:
- tcon &= ~(0x0f << 16);
- tcon |= S3C2410_TCON_T3MANUALUPD;
- break;
-
- case S5P_PWM4:
- tcon &= ~(0x07 << 20);
- tcon |= S3C2410_TCON_T4MANUALUPD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
-
- __raw_writel(tcnt, S3C2410_TCNTB(mode));
- __raw_writel(tcnt, S3C2410_TCMPB(mode));
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (mode) {
- case S5P_PWM0:
- tcon |= S3C2410_TCON_T0START;
- tcon &= ~S3C2410_TCON_T0MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T0RELOAD;
- else
- tcon &= ~S3C2410_TCON_T0RELOAD;
- break;
-
- case S5P_PWM1:
- tcon |= S3C2410_TCON_T1START;
- tcon &= ~S3C2410_TCON_T1MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T1RELOAD;
- else
- tcon &= ~S3C2410_TCON_T1RELOAD;
- break;
-
- case S5P_PWM2:
- tcon |= S3C2410_TCON_T2START;
- tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T2RELOAD;
- else
- tcon &= ~S3C2410_TCON_T2RELOAD;
- break;
-
- case S5P_PWM3:
- tcon |= S3C2410_TCON_T3START;
- tcon &= ~S3C2410_TCON_T3MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T3RELOAD;
- else
- tcon &= ~S3C2410_TCON_T3RELOAD;
- break;
-
- case S5P_PWM4:
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T4RELOAD;
- else
- tcon &= ~S3C2410_TCON_T4RELOAD;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", mode);
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static int s5p_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- s5p_time_setup(timer_source.event_id, cycles);
- s5p_time_start(timer_source.event_id, NON_PERIODIC);
-
- return 0;
-}
-
-static void s5p_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- s5p_time_stop(timer_source.event_id);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- break;
-
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- break;
-
- case CLOCK_EVT_MODE_RESUME:
- s5p_timer_resume();
- break;
- }
-}
-
-static void s5p_timer_resume(void)
-{
- /* event timer restart */
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
-
- /* source timer restart */
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
-}
-
-void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source)
-{
- s3c_device_timer[event].dev.bus = &platform_bus_type;
- s3c_device_timer[source].dev.bus = &platform_bus_type;
-
- timer_source.event_id = event;
- timer_source.source_id = source;
-}
-
-static struct clock_event_device time_event_device = {
- .name = "s5p_event_timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = s5p_set_next_event,
- .set_mode = s5p_set_mode,
-};
-
-static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction s5p_clock_event_irq = {
- .name = "s5p_time_irq",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s5p_clock_event_isr,
- .dev_id = &time_event_device,
-};
-
-static void __init s5p_clockevent_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
- unsigned int irq_number;
- struct clk *tscaler;
-
- pclk = clk_get_rate(timerclk);
-
- tscaler = clk_get_parent(tdiv_event);
-
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv_event, pclk / 2);
- clk_set_parent(tin_event, tdiv_event);
-
- clock_rate = clk_get_rate(tin_event);
- clock_count_per_tick = clock_rate / HZ;
-
- clockevents_calc_mult_shift(&time_event_device,
- clock_rate, S5PTIMER_MIN_RANGE);
- time_event_device.max_delta_ns =
- clockevent_delta2ns(-1, &time_event_device);
- time_event_device.min_delta_ns =
- clockevent_delta2ns(1, &time_event_device);
-
- time_event_device.cpumask = cpumask_of(0);
- clockevents_register_device(&time_event_device);
-
- irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &s5p_clock_event_irq);
-}
-
-static void __iomem *s5p_timer_reg(void)
-{
- unsigned long offset = 0;
-
- switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
- offset = (timer_source.source_id * 0x0c) + 0x14;
- break;
-
- case S5P_PWM4:
- offset = 0x40;
- break;
-
- default:
- printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
- return NULL;
- }
-
- return S3C_TIMERREG(offset);
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by U300 implementation.)
- */
-static u32 notrace s5p_read_sched_clock(void)
-{
- void __iomem *reg = s5p_timer_reg();
-
- if (!reg)
- return 0;
-
- return ~__raw_readl(reg);
-}
-
-static void __init s5p_clocksource_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv_source, pclk / 2);
- clk_set_parent(tin_source, tdiv_source);
-
- clock_rate = clk_get_rate(tin_source);
-
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
-
- setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
-
- if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
- clock_rate, 250, 32, clocksource_mmio_readl_down))
- panic("s5p_clocksource_timer: can't register clocksource\n");
-}
-
-static void __init s5p_timer_resources(void)
-{
-
- unsigned long event_id = timer_source.event_id;
- unsigned long source_id = timer_source.source_id;
- char devname[15];
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get timers clock for timer");
-
- clk_enable(timerclk);
-
- sprintf(devname, "s3c24xx-pwm.%lu", event_id);
- s3c_device_timer[event_id].id = event_id;
- s3c_device_timer[event_id].dev.init_name = devname;
-
- tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
- if (IS_ERR(tin_event))
- panic("failed to get pwm-tin clock for event timer");
-
- tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_event))
- panic("failed to get pwm-tdiv clock for event timer");
-
- clk_enable(tin_event);
-
- sprintf(devname, "s3c24xx-pwm.%lu", source_id);
- s3c_device_timer[source_id].id = source_id;
- s3c_device_timer[source_id].dev.init_name = devname;
-
- tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
- if (IS_ERR(tin_source))
- panic("failed to get pwm-tin clock for source timer");
-
- tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
- if (IS_ERR(tdiv_source))
- panic("failed to get pwm-tdiv clock for source timer");
-
- clk_enable(tin_source);
-}
-
-static void __init s5p_timer_init(void)
-{
- s5p_timer_resources();
- s5p_clockevent_init();
- s5p_clocksource_init();
-}
-
-struct sys_timer s5p_timer = {
- .init = s5p_timer_init,
-};
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(struct platform_device *pdev,
- bool on, u32 reset)
-{
- static DEFINE_SPINLOCK(lock);
- void __iomem *addr;
- unsigned long flags;
- int pid;
- u32 cfg;
-
- if (!pdev)
- return -EINVAL;
-
- pid = (pdev->id == -1) ? 0 : pdev->id;
-
- if (pid != 0 && pid != 1)
- return -EINVAL;
-
- addr = S5P_MIPI_DPHY_CONTROL(pid);
-
- spin_lock_irqsave(&lock, flags);
-
- cfg = __raw_readl(addr);
- cfg = on ? (cfg | reset) : (cfg & ~reset);
- __raw_writel(cfg, addr);
-
- if (on) {
- cfg |= S5P_MIPI_DPHY_ENABLE;
- } else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
- S5P_MIPI_DPHY_MRESETN) & ~reset)) {
- cfg &= ~S5P_MIPI_DPHY_ENABLE;
- }
-
- __raw_writel(cfg, addr);
- spin_unlock_irqrestore(&lock, flags);
-
- return 0;
-}
-
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on)
-{
- return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN);
-}
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
- return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5p/sleep.S
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common S5P Sleep Code
- * Based on S3C64XX sleep code by:
- * Ben Dooks, (c) 2008 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
-/*
- * The following code is located into the .data section. This is to
- * allow l2x0_regs_phys to be accessed with a relative load while we
- * can't rely on any MMU translation. We could have put l2x0_regs_phys
- * in the .text section as well, but some setups might insist on it to
- * be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
- */
- .data
- .align
-
- /*
- * sleep magic, to allow the bootloader to check for an valid
- * image to resume to. Must be the first word before the
- * s3c_cpu_resume entry.
- */
-
- .word 0x2bedf00d
-
- /*
- * s3c_cpu_resume
- *
- * resume code entry for bootloader to call
- */
-
-ENTRY(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
- adr r0, l2x0_regs_phys
- ldr r0, [r0]
- ldr r1, [r0, #L2X0_R_PHY_BASE]
- ldr r2, [r1, #L2X0_CTRL]
- tst r2, #0x1
- bne resume_l2on
- ldr r2, [r0, #L2X0_R_AUX_CTRL]
- str r2, [r1, #L2X0_AUX_CTRL]
- ldr r2, [r0, #L2X0_R_TAG_LATENCY]
- str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
- ldr r2, [r0, #L2X0_R_DATA_LATENCY]
- str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
- ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
- str r2, [r1, #L2X0_PREFETCH_CTRL]
- ldr r2, [r0, #L2X0_R_PWR_CTRL]
- str r2, [r1, #L2X0_POWER_CTRL]
- mov r2, #1
- str r2, [r1, #L2X0_CTRL]
-resume_l2on:
-#endif
- b cpu_resume
-ENDPROC(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
- .globl l2x0_regs_phys
-l2x0_regs_phys:
- .long 0
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-s5p/sysmmu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <asm/pgtable.h>
-
-#include <mach/map.h>
-#include <mach/regs-sysmmu.h>
-#include <plat/sysmmu.h>
-
-#define CTRL_ENABLE 0x5
-#define CTRL_BLOCK 0x7
-#define CTRL_DISABLE 0x0
-
-static struct device *dev;
-
-static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = {
- S5P_PAGE_FAULT_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AW_FAULT_ADDR,
- S5P_DEFAULT_SLAVE_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AW_FAULT_ADDR,
- S5P_AW_FAULT_ADDR
-};
-
-static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
- "PAGE FAULT",
- "AR MULTI-HIT FAULT",
- "AW MULTI-HIT FAULT",
- "BUS ERROR",
- "AR SECURITY PROTECTION FAULT",
- "AR ACCESS PROTECTION FAULT",
- "AW SECURITY PROTECTION FAULT",
- "AW ACCESS PROTECTION FAULT"
-};
-
-static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])(
- enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr);
-
-/*
- * If adjacent 2 bits are true, the system MMU is enabled.
- * The system MMU is disabled, otherwise.
- */
-static unsigned long sysmmu_states;
-
-static inline void set_sysmmu_active(sysmmu_ips ips)
-{
- sysmmu_states |= 3 << (ips * 2);
-}
-
-static inline void set_sysmmu_inactive(sysmmu_ips ips)
-{
- sysmmu_states &= ~(3 << (ips * 2));
-}
-
-static inline int is_sysmmu_active(sysmmu_ips ips)
-{
- return sysmmu_states & (3 << (ips * 2));
-}
-
-static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM];
-
-static inline void sysmmu_block(sysmmu_ips ips)
-{
- __raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL);
- dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void sysmmu_unblock(sysmmu_ips ips)
-{
- __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
- dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
- __raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH);
- dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd)
-{
- if (unlikely(pgd == 0)) {
- pgd = (unsigned long)ZERO_PAGE(0);
- __raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */
- } else {
- __raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */
- }
-
- __raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
-
- dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n",
- sysmmu_ips_name[ips], pgd);
- __sysmmu_tlb_invalidate(ips);
-}
-
-void sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr))
-{
- BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM)));
- fault_handlers[ips] = handler;
-}
-
-static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id)
-{
- /* SYSMMU is in blocked when interrupt occurred. */
- unsigned long base = 0;
- sysmmu_ips ips = (sysmmu_ips)dev_id;
- enum S5P_SYSMMU_INTERRUPT_TYPE itype;
-
- itype = (enum S5P_SYSMMU_INTERRUPT_TYPE)
- __ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS));
-
- BUG_ON(!((itype >= 0) && (itype < 8)));
-
- dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype],
- sysmmu_ips_name[ips]);
-
- if (fault_handlers[ips]) {
- unsigned long addr;
-
- base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
- addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]);
-
- if (fault_handlers[ips](itype, base, addr)) {
- __raw_writel(1 << itype,
- sysmmusfrs[ips] + S5P_INT_CLEAR);
- dev_notice(dev, "%s from %s is resolved."
- " Retrying translation.\n",
- sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
- } else {
- base = 0;
- }
- }
-
- sysmmu_unblock(ips);
-
- if (!base)
- dev_notice(dev, "%s from %s is not handled.\n",
- sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
-
- return IRQ_HANDLED;
-}
-
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd)
-{
- if (is_sysmmu_active(ips)) {
- sysmmu_block(ips);
- __sysmmu_set_ptbase(ips, pgd);
- sysmmu_unblock(ips);
- } else {
- dev_dbg(dev, "%s is disabled. "
- "Skipping initializing page table base.\n",
- sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd)
-{
- if (!is_sysmmu_active(ips)) {
- sysmmu_clk_enable(ips);
-
- __sysmmu_set_ptbase(ips, pgd);
-
- __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-
- set_sysmmu_active(ips);
- dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]);
- } else {
- dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_disable(sysmmu_ips ips)
-{
- if (is_sysmmu_active(ips)) {
- __raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
- set_sysmmu_inactive(ips);
- sysmmu_clk_disable(ips);
- dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]);
- } else {
- dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
- if (is_sysmmu_active(ips)) {
- sysmmu_block(ips);
- __sysmmu_tlb_invalidate(ips);
- sysmmu_unblock(ips);
- } else {
- dev_dbg(dev, "%s is disabled. "
- "Skipping invalidating TLB.\n", sysmmu_ips_name[ips]);
- }
-}
-
-static int s5p_sysmmu_probe(struct platform_device *pdev)
-{
- int i, ret;
- struct resource *res, *mem;
-
- dev = &pdev->dev;
-
- for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) {
- int irq;
-
- sysmmu_clk_init(dev, i);
- sysmmu_clk_disable(i);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- if (!res) {
- dev_err(dev, "Failed to get the resource of %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENODEV;
- goto err_res;
- }
-
- mem = request_mem_region(res->start, resource_size(res),
- pdev->name);
- if (!mem) {
- dev_err(dev, "Failed to request the memory region of %s.\n",
- sysmmu_ips_name[i]);
- ret = -EBUSY;
- goto err_res;
- }
-
- sysmmusfrs[i] = ioremap(res->start, resource_size(res));
- if (!sysmmusfrs[i]) {
- dev_err(dev, "Failed to ioremap() for %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENXIO;
- goto err_reg;
- }
-
- irq = platform_get_irq(pdev, i);
- if (irq <= 0) {
- dev_err(dev, "Failed to get the IRQ resource of %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENOENT;
- goto err_map;
- }
-
- if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED,
- pdev->name, (void *)i)) {
- dev_err(dev, "Failed to request IRQ for %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENOENT;
- goto err_map;
- }
- }
-
- return 0;
-
-err_map:
- iounmap(sysmmusfrs[i]);
-err_reg:
- release_mem_region(mem->start, resource_size(mem));
-err_res:
- return ret;
-}
-
-static int s5p_sysmmu_remove(struct platform_device *pdev)
-{
- return 0;
-}
-int s5p_sysmmu_runtime_suspend(struct device *dev)
-{
- return 0;
-}
-
-int s5p_sysmmu_runtime_resume(struct device *dev)
-{
- return 0;
-}
-
-const struct dev_pm_ops s5p_sysmmu_pm_ops = {
- .runtime_suspend = s5p_sysmmu_runtime_suspend,
- .runtime_resume = s5p_sysmmu_runtime_resume,
-};
-
-static struct platform_driver s5p_sysmmu_driver = {
- .probe = s5p_sysmmu_probe,
- .remove = s5p_sysmmu_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = "s5p-sysmmu",
- .pm = &s5p_sysmmu_pm_ops,
- }
-};
-
-static int __init s5p_sysmmu_init(void)
-{
- return platform_driver_register(&s5p_sysmmu_driver);
-}
-arch_initcall(s5p_sysmmu_init);
help
Base platform code for all Samsung SoC based systems
+config PLAT_S5P
+ bool
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ default y
+ select ARM_VIC if !ARCH_EXYNOS
+ select ARM_GIC if ARCH_EXYNOS
+ select GIC_NON_BANKED if ARCH_EXYNOS4
+ select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
+ select S3C_GPIO_TRACK
+ select S5P_GPIO_DRVSTR
+ select SAMSUNG_GPIOLIB_4BIT
+ select PLAT_SAMSUNG
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_IRQ_VIC_TIMER
+ help
+ Base platform code for Samsung's S5P series SoC.
+
if PLAT_SAMSUNG
# boot configurations
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
+# timer options
+
+config S5P_HRT
+ bool
+ select SAMSUNG_DEV_PWM
+ help
+ Use the High Resolution timer support
+
# clock options
config SAMSUNG_CLKSRC
Select the clock code for the clksrc implementation
used by newer systems such as the S3C64XX.
+config S5P_CLOCK
+ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ help
+ Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
+
# options for IRQ support
config SAMSUNG_IRQ_VIC_TIMER
help
Internal configuration to build the VIC timer interrupt code.
+config S5P_IRQ
+ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ help
+ Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs
+
+config S5P_EXT_INT
+ bool
+ help
+ Use the external interrupts (other than GPIO interrupts.)
+ Note: Do not choose this for S5P6440 and S5P6450.
+
+config S5P_GPIO_INT
+ bool
+ help
+ Common code for the GPIO interrupts (other than external interrupts.)
+
# options for gpio configuration support
config SAMSUNG_GPIOLIB_4BIT
Internal configuration option to enable the s3c specific gpio
chip tracking if the platform requires it.
+# uart options
+
+config S5P_DEV_UART
+ def_bool y
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
# ADC driver
config S3C_ADC
help
Compile in platform device definition LCD backlight with PWM Timer
+config S5P_DEV_CSIS0
+ bool
+ help
+ Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+ bool
+ help
+ Compile in platform device definitions for MIPI-CSIS channel 1
+
+config S5P_DEV_FIMC0
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_FIMC3
+ bool
+ help
+ Compile in platform device definitions for FIMC controller 3
+
+config S5P_DEV_FIMD0
+ bool
+ help
+ Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_G2D
+ bool
+ help
+ Compile in platform device definitions for G2D device
+
+config S5P_DEV_I2C_HDMIPHY
+ bool
+ help
+ Compile in platform device definitions for I2C HDMIPHY controller
+
+config S5P_DEV_JPEG
+ bool
+ help
+ Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_MFC
+ bool
+ help
+ Compile in setup memory (init) code for MFC
+
+config S5P_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_TV
+ bool
+ help
+ Compile in platform device definition for TV interface
+
+config S5P_DEV_USB_EHCI
+ bool
+ help
+ Compile in platform device definition for USB EHCI
+
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
Support for exporting the PWM timer blocks via the pwm device
system
+config S5P_SETUP_MIPIPHY
+ bool
+ help
+ Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
+
# DMA
config S3C_DMA
and above. This code allows a set of interrupt to wakeup-mask
mappings. See <plat/wakeup-mask.h>
+config S5P_PM
+ bool
+ help
+ Common code for power management support on S5P and newer SoCs
+ Note: Do not select this for S5P6440 and S5P6450.
+
+config S5P_SLEEP
+ bool
+ help
+ Internal config node to apply common S5P sleep management code.
+ Can be selected by S5P and newer SoCs with similar sleep procedure.
+
comment "Power Domain"
config SAMSUNG_PD
obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
+obj-$(CONFIG_S5P_HRT) += s5p-time.o
+
obj-y += clock.o
obj-y += pwm-clock.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
+obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+obj-$(CONFIG_S5P_IRQ) += s5p-irq.o
+obj-$(CONFIG_S5P_EXT_INT) += s5p-irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT) += s5p-irq-gpioint.o
# ADC
obj-y += devs.o
obj-y += dev-uart.o
+obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
+obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o
obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
+obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
+
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
+obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o
+obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
+
# PD support
obj-$(CONFIG_SAMSUNG_PD) += pd.o
extern struct platform_device exynos4_device_pcm2;
extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_sysmmu;
extern struct platform_device samsung_asoc_dma;
extern struct platform_device samsung_asoc_idma;
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_SYSMMU_H
-#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
- SYSMMU_PAGEFAULT,
- SYSMMU_AR_MULTIHIT,
- SYSMMU_AW_MULTIHIT,
- SYSMMU_BUSERROR,
- SYSMMU_AR_SECURITY,
- SYSMMU_AR_ACCESS,
- SYSMMU_AW_SECURITY,
- SYSMMU_AW_PROTECTION, /* 7 */
- SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- * SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- * translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- * zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
--- /dev/null
+/*
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+ .name = "ext_xtal",
+ .id = -1,
+};
+
+struct clk clk_xusbxti = {
+ .name = "xusbxti",
+ .id = -1,
+};
+
+struct clk s5p_clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+ .name = "fout_apll",
+ .id = -1,
+};
+
+/* BPLL clock output */
+
+struct clk clk_fout_bpll = {
+ .name = "fout_bpll",
+ .id = -1,
+};
+
+/* CPLL clock output */
+
+struct clk clk_fout_cpll = {
+ .name = "fout_cpll",
+ .id = -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+ .name = "fout_mpll",
+ .id = -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+ .name = "fout_epll",
+ .id = -1,
+ .ctrlbit = (1 << 31),
+};
+
+/* DPLL clock output */
+struct clk clk_fout_dpll = {
+ .name = "fout_dpll",
+ .id = -1,
+ .ctrlbit = (1 << 31),
+};
+
+/* VPLL clock output */
+struct clk clk_fout_vpll = {
+ .name = "fout_vpll",
+ .id = -1,
+ .ctrlbit = (1 << 31),
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for BPLL Mux */
+static struct clk *clk_src_bpll_list[] = {
+ [0] = &clk_fin_bpll,
+ [1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll = {
+ .sources = clk_src_bpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_bpll_list),
+};
+
+/* Possible clock sources for CPLL Mux */
+static struct clk *clk_src_cpll_list[] = {
+ [0] = &clk_fin_cpll,
+ [1] = &clk_fout_cpll,
+};
+
+struct clksrc_sources clk_src_cpll = {
+ .sources = clk_src_cpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_cpll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+ .sources = clk_src_epll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_epll_list),
+};
+
+/* Possible clock sources for DPLL Mux */
+static struct clk *clk_src_dpll_list[] = {
+ [0] = &clk_fin_dpll,
+ [1] = &clk_fout_dpll,
+};
+
+struct clksrc_sources clk_src_dpll = {
+ .sources = clk_src_dpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_dpll_list),
+};
+
+struct clk clk_vpll = {
+ .name = "vpll",
+ .id = -1,
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+ con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+ __raw_writel(con, reg);
+ return 0;
+}
+
+int s5p_epll_enable(struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+ if (enable)
+ __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+ else
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ return 0;
+}
+
+unsigned long s5p_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+int s5p_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *pclk;
+ int ret;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ ret = pclk->ops->set_rate(pclk, rate);
+ clk_put(pclk);
+
+ return ret;
+}
+
+unsigned long s5p_spdif_get_rate(struct clk *clk)
+{
+ struct clk *pclk;
+ int rate;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ rate = pclk->ops->get_rate(pclk);
+ clk_put(pclk);
+
+ return rate;
+}
+
+struct clk_ops s5p_sclk_spdif_ops = {
+ .set_rate = s5p_spdif_set_rate,
+ .get_rate = s5p_spdif_get_rate,
+};
+
+static struct clk *s5p_clks[] __initdata = {
+ &clk_ext_xtal_mux,
+ &clk_48m,
+ &s5p_clk_27m,
+ &clk_fout_apll,
+ &clk_fout_mpll,
+ &clk_fout_epll,
+ &clk_fout_dpll,
+ &clk_fout_vpll,
+ &clk_vpll,
+ &clk_xusbxti,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+ int ret;
+
+ clk_ext_xtal_mux.rate = xtal_freq;
+
+ ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register s5p clocks\n");
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ *
+ * Base S5P MFC resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+#include <plat/mfc.h>
+
+struct s5p_mfc_reserved_mem {
+ phys_addr_t base;
+ unsigned long size;
+ struct device *dev;
+};
+
+static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
+
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+ phys_addr_t lbase, unsigned int lsize)
+{
+ int i;
+
+ s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
+ s5p_mfc_mem[0].base = rbase;
+ s5p_mfc_mem[0].size = rsize;
+
+ s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
+ s5p_mfc_mem[1].base = lbase;
+ s5p_mfc_mem[1].size = lsize;
+
+ for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+ struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+ if (memblock_remove(area->base, area->size)) {
+ printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
+ area->size, (unsigned long) area->base);
+ area->base = 0;
+ }
+ }
+}
+
+static int __init s5p_mfc_memory_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+ struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+ if (!area->base)
+ continue;
+
+ if (dma_declare_coherent_memory(area->dev, area->base,
+ area->base, area->size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
+ printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
+ area->size, (unsigned long) area->base);
+ }
+ return 0;
+}
+device_initcall(s5p_mfc_memory_init);
--- /dev/null
+/*
+ * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART0),
+};
+
+static struct resource s5p_uart1_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART1),
+};
+
+static struct resource s5p_uart2_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART2),
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+ [0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART3),
+#endif
+};
+
+static struct resource s5p_uart4_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+ [0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART4),
+#endif
+};
+
+static struct resource s5p_uart5_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+ [0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
+ [1] = DEFINE_RES_IRQ(IRQ_UART5),
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s5p_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart0_resource),
+ },
+ [1] = {
+ .resources = s5p_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart1_resource),
+ },
+ [2] = {
+ .resources = s5p_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart2_resource),
+ },
+ [3] = {
+ .resources = s5p_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart3_resource),
+ },
+ [4] = {
+ .resources = s5p_uart4_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart4_resource),
+ },
+ [5] = {
+ .resources = s5p_uart5_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart5_resource),
+ },
+};
--- /dev/null
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(struct irq_data *data)
+{
+ u32 mask;
+
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask |= eint_irq_to_bit(data->irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_eint_unmask(struct irq_data *data)
+{
+ u32 mask;
+
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask &= ~(eint_irq_to_bit(data->irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+}
+
+static inline void s5p_irq_eint_ack(struct irq_data *data)
+{
+ __raw_writel(eint_irq_to_bit(data->irq),
+ S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_eint_maskack(struct irq_data *data)
+{
+ /* compiler should in-line these */
+ s5p_irq_eint_mask(data);
+ s5p_irq_eint_ack(data);
+}
+
+static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = EINT_OFFSET(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+
+ if ((0 <= offs) && (offs < 8))
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+ else if ((8 <= offs) && (offs < 16))
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+ else if ((16 <= offs) && (offs < 24))
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+ else if ((24 <= offs) && (offs < 32))
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+ else
+ printk(KERN_ERR "No such irq number %d", offs);
+
+ return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+ .name = "s5p-eint",
+ .irq_mask = s5p_irq_eint_mask,
+ .irq_unmask = s5p_irq_eint_unmask,
+ .irq_mask_ack = s5p_irq_eint_maskack,
+ .irq_ack = s5p_irq_eint_ack,
+ .irq_set_type = s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .irq_set_wake = s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+ unsigned int irq;
+
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ s5p_irq_demux_eint(IRQ_EINT(16));
+ s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
+{
+ void __iomem *base = irq_data_get_irq_chip_data(data);
+
+ s5p_irq_eint_mask(data);
+ writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s5p_irq_vic_eint_unmask(struct irq_data *data)
+{
+ void __iomem *base = irq_data_get_irq_chip_data(data);
+
+ s5p_irq_eint_unmask(data);
+ writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
+}
+
+static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
+{
+ __raw_writel(eint_irq_to_bit(data->irq),
+ S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(struct irq_data *data)
+{
+ s5p_irq_vic_eint_mask(data);
+ s5p_irq_vic_eint_ack(data);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+ .name = "s5p_vic_eint",
+ .irq_mask = s5p_irq_vic_eint_mask,
+ .irq_unmask = s5p_irq_vic_eint_unmask,
+ .irq_mask_ack = s5p_irq_vic_eint_maskack,
+ .irq_ack = s5p_irq_vic_eint_ack,
+ .irq_set_type = s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .irq_set_wake = s3c_irqext_wake,
+#endif
+};
+
+static int __init s5p_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+ irq_set_chip(irq, &s5p_irq_vic_eint);
+
+ for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+ irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+ return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);
--- /dev/null
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <mach/map.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+
+#include <asm/mach/irq.h>
+
+#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u)
+
+#define CON_OFFSET 0x700
+#define MASK_OFFSET 0x900
+#define PEND_OFFSET 0xA00
+#define REG_OFFSET(x) ((x) << 2)
+
+struct s5p_gpioint_bank {
+ struct list_head list;
+ int start;
+ int nr_groups;
+ int irq;
+ struct samsung_gpio_chip **chips;
+ void (*handler)(unsigned int, struct irq_desc *);
+};
+
+static LIST_HEAD(banks);
+
+static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ unsigned int shift = (d->irq - gc->irq_base) << 2;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ type = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ type = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ type = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ type = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+ case IRQ_TYPE_NONE:
+ default:
+ printk(KERN_WARNING "No irq type\n");
+ return -EINVAL;
+ }
+
+ gc->type_cache &= ~(0x7 << shift);
+ gc->type_cache |= type << shift;
+ writel(gc->type_cache, gc->reg_base + ct->regs.type);
+ return 0;
+}
+
+static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
+ int group, pend_offset, mask_offset;
+ unsigned int pend, mask;
+
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
+
+ for (group = 0; group < bank->nr_groups; group++) {
+ struct samsung_gpio_chip *chip = bank->chips[group];
+ if (!chip)
+ continue;
+
+ pend_offset = REG_OFFSET(group);
+ pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
+ if (!pend)
+ continue;
+
+ mask_offset = REG_OFFSET(group);
+ mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
+ pend &= ~mask;
+
+ while (pend) {
+ int offset = fls(pend) - 1;
+ int real_irq = chip->irq_base + offset;
+ generic_handle_irq(real_irq);
+ pend &= ~BIT(offset);
+ }
+ }
+ chained_irq_exit(chip, desc);
+}
+
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
+{
+ static int used_gpioint_groups = 0;
+ int group = chip->group;
+ struct s5p_gpioint_bank *b, *bank = NULL;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
+ return -ENOMEM;
+
+ list_for_each_entry(b, &banks, list) {
+ if (group >= b->start && group < b->start + b->nr_groups) {
+ bank = b;
+ break;
+ }
+ }
+ if (!bank)
+ return -EINVAL;
+
+ if (!bank->handler) {
+ bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
+ bank->nr_groups, GFP_KERNEL);
+ if (!bank->chips)
+ return -ENOMEM;
+
+ irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
+ irq_set_handler_data(bank->irq, bank);
+ bank->handler = s5p_gpioint_handler;
+ printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
+ bank->irq);
+ }
+
+ /*
+ * chained GPIO irq has been successfully registered, allocate new gpio
+ * int group and assign irq nubmers
+ */
+ chip->irq_base = S5P_GPIOINT_BASE +
+ used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
+ used_gpioint_groups++;
+
+ bank->chips[group - bank->start] = chip;
+
+ gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
+ (void __iomem *)GPIO_BASE(chip),
+ handle_level_irq);
+ if (!gc)
+ return -ENOMEM;
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_type = s5p_gpioint_set_type,
+ ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
+ ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
+ ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
+ irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
+ IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+ return 0;
+}
+
+int __init s5p_register_gpio_interrupt(int pin)
+{
+ struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
+ int offset, group;
+ int ret;
+
+ if (!my_chip)
+ return -EINVAL;
+
+ offset = pin - my_chip->chip.base;
+ group = my_chip->group;
+
+ /* check if the group has been already registered */
+ if (my_chip->irq_base)
+ return my_chip->irq_base + offset;
+
+ /* register gpio group */
+ ret = s5p_gpioint_add(my_chip);
+ if (ret == 0) {
+ my_chip->chip.to_irq = samsung_gpiolib_to_irq;
+ printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
+ group);
+ return my_chip->irq_base + offset;
+ }
+ return ret;
+}
+
+int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
+{
+ struct s5p_gpioint_bank *bank;
+
+ bank = kzalloc(sizeof(*bank), GFP_KERNEL);
+ if (!bank)
+ return -ENOMEM;
+
+ bank->start = start;
+ bank->nr_groups = nr_groups;
+ bank->irq = chain_irq;
+
+ list_add_tail(&bank->list, &banks);
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/plat-s3c24xx/irq-pm.c,
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <plat/cpu.h>
+#include <plat/irqs.h>
+#include <plat/pm.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
+ * as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow = 0x00000006L;
+unsigned long s3c_irqwake_eintallow = 0xffffffffL;
+
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
+{
+ unsigned long irqbit;
+ unsigned int irq_rtc_tic, irq_rtc_alarm;
+
+#ifdef CONFIG_ARCH_EXYNOS
+ if (soc_is_exynos5250()) {
+ irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
+ } else {
+ irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
+ }
+#else
+ irq_rtc_tic = IRQ_RTC_TIC;
+ irq_rtc_alarm = IRQ_RTC_ALARM;
+#endif
+
+ if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
+ irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
+
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+ } else {
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static struct sleep_save eint_save[] = {
+ SAVE_ITEM(S5P_EINT_CON(0)),
+ SAVE_ITEM(S5P_EINT_CON(1)),
+ SAVE_ITEM(S5P_EINT_CON(2)),
+ SAVE_ITEM(S5P_EINT_CON(3)),
+
+ SAVE_ITEM(S5P_EINT_FLTCON(0)),
+ SAVE_ITEM(S5P_EINT_FLTCON(1)),
+ SAVE_ITEM(S5P_EINT_FLTCON(2)),
+ SAVE_ITEM(S5P_EINT_FLTCON(3)),
+ SAVE_ITEM(S5P_EINT_FLTCON(4)),
+ SAVE_ITEM(S5P_EINT_FLTCON(5)),
+ SAVE_ITEM(S5P_EINT_FLTCON(6)),
+ SAVE_ITEM(S5P_EINT_FLTCON(7)),
+
+ SAVE_ITEM(S5P_EINT_MASK(0)),
+ SAVE_ITEM(S5P_EINT_MASK(1)),
+ SAVE_ITEM(S5P_EINT_MASK(2)),
+ SAVE_ITEM(S5P_EINT_MASK(3)),
+};
+
+int s3c24xx_irq_suspend(void)
+{
+ s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
+
+ return 0;
+}
+
+void s3c24xx_irq_resume(void)
+{
+ s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
+}
+
--- /dev/null
+/*
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+#ifdef CONFIG_ARM_VIC
+ int irq;
+
+ /* initialize the VICs */
+ for (irq = 0; irq < num_vic; irq++)
+ vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+#endif
+
+ s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
--- /dev/null
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P Power Manager (Suspend-To-RAM) support
+ *
+ * Based on arch/arm/plat-s3c24xx/pm.c
+ * Copyright (c) 2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <plat/pm.h>
+
+#define PFX "s5p pm: "
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+ /* nothing here yet */
+}
+
+void s3c_pm_restore_core(void)
+{
+ /* nothing here yet */
+}
+
+void s3c_pm_save_core(void)
+{
+ /* nothing here yet */
+}
+
--- /dev/null
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common S5P Sleep Code
+ * Based on S3C64XX sleep code by:
+ * Ben Dooks, (c) 2008 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/*
+ * The following code is located into the .data section. This is to
+ * allow l2x0_regs_phys to be accessed with a relative load while we
+ * can't rely on any MMU translation. We could have put l2x0_regs_phys
+ * in the .text section as well, but some setups might insist on it to
+ * be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+ .data
+ .align
+
+ /*
+ * sleep magic, to allow the bootloader to check for an valid
+ * image to resume to. Must be the first word before the
+ * s3c_cpu_resume entry.
+ */
+
+ .word 0x2bedf00d
+
+ /*
+ * s3c_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ */
+
+ENTRY(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+ adr r0, l2x0_regs_phys
+ ldr r0, [r0]
+ ldr r1, [r0, #L2X0_R_PHY_BASE]
+ ldr r2, [r1, #L2X0_CTRL]
+ tst r2, #0x1
+ bne resume_l2on
+ ldr r2, [r0, #L2X0_R_AUX_CTRL]
+ str r2, [r1, #L2X0_AUX_CTRL]
+ ldr r2, [r0, #L2X0_R_TAG_LATENCY]
+ str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+ ldr r2, [r0, #L2X0_R_DATA_LATENCY]
+ str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+ ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
+ str r2, [r1, #L2X0_PREFETCH_CTRL]
+ ldr r2, [r0, #L2X0_R_PWR_CTRL]
+ str r2, [r1, #L2X0_POWER_CTRL]
+ mov r2, #1
+ str r2, [r1, #L2X0_CTRL]
+resume_l2on:
+#endif
+ b cpu_resume
+ENDPROC(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+ .globl l2x0_regs_phys
+l2x0_regs_phys:
+ .long 0
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Common hr-timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+
+#include <asm/smp_twd.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/sched_clock.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+#include <plat/s5p-time.h>
+
+static struct clk *tin_event;
+static struct clk *tin_source;
+static struct clk *tdiv_event;
+static struct clk *tdiv_source;
+static struct clk *timerclk;
+static struct s5p_timer_source timer_source;
+static unsigned long clock_count_per_tick;
+static void s5p_timer_resume(void);
+
+static void s5p_time_stop(enum s5p_timer_mode mode)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (mode) {
+ case S5P_PWM0:
+ tcon &= ~S3C2410_TCON_T0START;
+ break;
+
+ case S5P_PWM1:
+ tcon &= ~S3C2410_TCON_T1START;
+ break;
+
+ case S5P_PWM2:
+ tcon &= ~S3C2410_TCON_T2START;
+ break;
+
+ case S5P_PWM3:
+ tcon &= ~S3C2410_TCON_T3START;
+ break;
+
+ case S5P_PWM4:
+ tcon &= ~S3C2410_TCON_T4START;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", mode);
+ break;
+ }
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ tcnt--;
+
+ switch (mode) {
+ case S5P_PWM0:
+ tcon &= ~(0x0f << 0);
+ tcon |= S3C2410_TCON_T0MANUALUPD;
+ break;
+
+ case S5P_PWM1:
+ tcon &= ~(0x0f << 8);
+ tcon |= S3C2410_TCON_T1MANUALUPD;
+ break;
+
+ case S5P_PWM2:
+ tcon &= ~(0x0f << 12);
+ tcon |= S3C2410_TCON_T2MANUALUPD;
+ break;
+
+ case S5P_PWM3:
+ tcon &= ~(0x0f << 16);
+ tcon |= S3C2410_TCON_T3MANUALUPD;
+ break;
+
+ case S5P_PWM4:
+ tcon &= ~(0x07 << 20);
+ tcon |= S3C2410_TCON_T4MANUALUPD;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", mode);
+ break;
+ }
+
+ __raw_writel(tcnt, S3C2410_TCNTB(mode));
+ __raw_writel(tcnt, S3C2410_TCMPB(mode));
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (mode) {
+ case S5P_PWM0:
+ tcon |= S3C2410_TCON_T0START;
+ tcon &= ~S3C2410_TCON_T0MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T0RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T0RELOAD;
+ break;
+
+ case S5P_PWM1:
+ tcon |= S3C2410_TCON_T1START;
+ tcon &= ~S3C2410_TCON_T1MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T1RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T1RELOAD;
+ break;
+
+ case S5P_PWM2:
+ tcon |= S3C2410_TCON_T2START;
+ tcon &= ~S3C2410_TCON_T2MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T2RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T2RELOAD;
+ break;
+
+ case S5P_PWM3:
+ tcon |= S3C2410_TCON_T3START;
+ tcon &= ~S3C2410_TCON_T3MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T3RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T3RELOAD;
+ break;
+
+ case S5P_PWM4:
+ tcon |= S3C2410_TCON_T4START;
+ tcon &= ~S3C2410_TCON_T4MANUALUPD;
+
+ if (periodic)
+ tcon |= S3C2410_TCON_T4RELOAD;
+ else
+ tcon &= ~S3C2410_TCON_T4RELOAD;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", mode);
+ break;
+ }
+ __raw_writel(tcon, S3C2410_TCON);
+}
+
+static int s5p_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ s5p_time_setup(timer_source.event_id, cycles);
+ s5p_time_start(timer_source.event_id, NON_PERIODIC);
+
+ return 0;
+}
+
+static void s5p_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ s5p_time_stop(timer_source.event_id);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ s5p_time_setup(timer_source.event_id, clock_count_per_tick);
+ s5p_time_start(timer_source.event_id, PERIODIC);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ s5p_timer_resume();
+ break;
+ }
+}
+
+static void s5p_timer_resume(void)
+{
+ /* event timer restart */
+ s5p_time_setup(timer_source.event_id, clock_count_per_tick);
+ s5p_time_start(timer_source.event_id, PERIODIC);
+
+ /* source timer restart */
+ s5p_time_setup(timer_source.source_id, TCNT_MAX);
+ s5p_time_start(timer_source.source_id, PERIODIC);
+}
+
+void __init s5p_set_timer_source(enum s5p_timer_mode event,
+ enum s5p_timer_mode source)
+{
+ s3c_device_timer[event].dev.bus = &platform_bus_type;
+ s3c_device_timer[source].dev.bus = &platform_bus_type;
+
+ timer_source.event_id = event;
+ timer_source.source_id = source;
+}
+
+static struct clock_event_device time_event_device = {
+ .name = "s5p_event_timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = s5p_set_next_event,
+ .set_mode = s5p_set_mode,
+};
+
+static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction s5p_clock_event_irq = {
+ .name = "s5p_time_irq",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = s5p_clock_event_isr,
+ .dev_id = &time_event_device,
+};
+
+static void __init s5p_clockevent_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+ unsigned int irq_number;
+ struct clk *tscaler;
+
+ pclk = clk_get_rate(timerclk);
+
+ tscaler = clk_get_parent(tdiv_event);
+
+ clk_set_rate(tscaler, pclk / 2);
+ clk_set_rate(tdiv_event, pclk / 2);
+ clk_set_parent(tin_event, tdiv_event);
+
+ clock_rate = clk_get_rate(tin_event);
+ clock_count_per_tick = clock_rate / HZ;
+
+ clockevents_calc_mult_shift(&time_event_device,
+ clock_rate, S5PTIMER_MIN_RANGE);
+ time_event_device.max_delta_ns =
+ clockevent_delta2ns(-1, &time_event_device);
+ time_event_device.min_delta_ns =
+ clockevent_delta2ns(1, &time_event_device);
+
+ time_event_device.cpumask = cpumask_of(0);
+ clockevents_register_device(&time_event_device);
+
+ irq_number = timer_source.event_id + IRQ_TIMER0;
+ setup_irq(irq_number, &s5p_clock_event_irq);
+}
+
+static void __iomem *s5p_timer_reg(void)
+{
+ unsigned long offset = 0;
+
+ switch (timer_source.source_id) {
+ case S5P_PWM0:
+ case S5P_PWM1:
+ case S5P_PWM2:
+ case S5P_PWM3:
+ offset = (timer_source.source_id * 0x0c) + 0x14;
+ break;
+
+ case S5P_PWM4:
+ offset = 0x40;
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
+ return NULL;
+ }
+
+ return S3C_TIMERREG(offset);
+}
+
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by U300 implementation.)
+ */
+static u32 notrace s5p_read_sched_clock(void)
+{
+ void __iomem *reg = s5p_timer_reg();
+
+ if (!reg)
+ return 0;
+
+ return ~__raw_readl(reg);
+}
+
+static void __init s5p_clocksource_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+
+ pclk = clk_get_rate(timerclk);
+
+ clk_set_rate(tdiv_source, pclk / 2);
+ clk_set_parent(tin_source, tdiv_source);
+
+ clock_rate = clk_get_rate(tin_source);
+
+ s5p_time_setup(timer_source.source_id, TCNT_MAX);
+ s5p_time_start(timer_source.source_id, PERIODIC);
+
+ setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
+
+ if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
+ clock_rate, 250, 32, clocksource_mmio_readl_down))
+ panic("s5p_clocksource_timer: can't register clocksource\n");
+}
+
+static void __init s5p_timer_resources(void)
+{
+
+ unsigned long event_id = timer_source.event_id;
+ unsigned long source_id = timer_source.source_id;
+ char devname[15];
+
+ timerclk = clk_get(NULL, "timers");
+ if (IS_ERR(timerclk))
+ panic("failed to get timers clock for timer");
+
+ clk_enable(timerclk);
+
+ sprintf(devname, "s3c24xx-pwm.%lu", event_id);
+ s3c_device_timer[event_id].id = event_id;
+ s3c_device_timer[event_id].dev.init_name = devname;
+
+ tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
+ if (IS_ERR(tin_event))
+ panic("failed to get pwm-tin clock for event timer");
+
+ tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
+ if (IS_ERR(tdiv_event))
+ panic("failed to get pwm-tdiv clock for event timer");
+
+ clk_enable(tin_event);
+
+ sprintf(devname, "s3c24xx-pwm.%lu", source_id);
+ s3c_device_timer[source_id].id = source_id;
+ s3c_device_timer[source_id].dev.init_name = devname;
+
+ tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
+ if (IS_ERR(tin_source))
+ panic("failed to get pwm-tin clock for source timer");
+
+ tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
+ if (IS_ERR(tdiv_source))
+ panic("failed to get pwm-tdiv clock for source timer");
+
+ clk_enable(tin_source);
+}
+
+static void __init s5p_timer_init(void)
+{
+ s5p_timer_resources();
+ s5p_clockevent_init();
+ s5p_clocksource_init();
+}
+
+struct sys_timer s5p_timer = {
+ .init = s5p_timer_init,
+};
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <mach/regs-clock.h>
+
+static int __s5p_mipi_phy_control(struct platform_device *pdev,
+ bool on, u32 reset)
+{
+ static DEFINE_SPINLOCK(lock);
+ void __iomem *addr;
+ unsigned long flags;
+ int pid;
+ u32 cfg;
+
+ if (!pdev)
+ return -EINVAL;
+
+ pid = (pdev->id == -1) ? 0 : pdev->id;
+
+ if (pid != 0 && pid != 1)
+ return -EINVAL;
+
+ addr = S5P_MIPI_DPHY_CONTROL(pid);
+
+ spin_lock_irqsave(&lock, flags);
+
+ cfg = __raw_readl(addr);
+ cfg = on ? (cfg | reset) : (cfg & ~reset);
+ __raw_writel(cfg, addr);
+
+ if (on) {
+ cfg |= S5P_MIPI_DPHY_ENABLE;
+ } else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
+ S5P_MIPI_DPHY_MRESETN) & ~reset)) {
+ cfg &= ~S5P_MIPI_DPHY_ENABLE;
+ }
+
+ __raw_writel(cfg, addr);
+ spin_unlock_irqrestore(&lock, flags);
+
+ return 0;
+}
+
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on)
+{
+ return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN);
+}
+
+int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
+{
+ return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN);
+}
projects / mirror_ubuntu-zesty-kernel.git / commitdiff