hw/riscv: sifive_u: Support different boot source per MSEL pin state

SiFive FU540 SoC supports booting from several sources, which are
controlled using the Mode Select (MSEL[3:0]) pins on the chip.
Typically, the boot process runs through several stages before it
begins execution of user-provided programs.

The SoC supports booting from memory-mapped QSPI flash, which is
how start_in_flash property is used for at present. This matches
MSEL = 1 configuration (QSPI0).

Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL).
It's not necessary for QEMU to implement the full ZSBL ROM codes,
because we know ZSBL downloads the next stage program into the L2
LIM at address 0x8000000 and executes from there. We can bypass
the whole ZSBL execution and use "-bios" to load the next stage
program directly if MSEL indicates a ZSBL booting flow.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com
Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index ed13bc043c3bc85c23d6218d8258ba817b1286c8..eb767aa8639ca5f1d78d779ddba20db999ba79f2 100644 (file)
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -405,8 +405,34 @@ static void sifive_u_machine_init(MachineState *machine)
     /* create device tree */
     create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
 
-    riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                 memmap[SIFIVE_U_DRAM].base, NULL);
+    if (s->start_in_flash) {
+        /*
+         * If start_in_flash property is given, assign s->msel to a value
+         * that representing booting from QSPI0 memory-mapped flash.
+         *
+         * This also means that when both start_in_flash and msel properties
+         * are given, start_in_flash takes the precedence over msel.
+         *
+         * Note this is to keep backward compatibility not to break existing
+         * users that use start_in_flash property.
+         */
+        s->msel = MSEL_MEMMAP_QSPI0_FLASH;
+    }
+
+    switch (s->msel) {
+    case MSEL_MEMMAP_QSPI0_FLASH:
+        start_addr = memmap[SIFIVE_U_FLASH0].base;
+        break;
+    case MSEL_L2LIM_QSPI0_FLASH:
+    case MSEL_L2LIM_QSPI2_SD:
+        start_addr = memmap[SIFIVE_U_L2LIM].base;
+        break;
+    default:
+        start_addr = memmap[SIFIVE_U_DRAM].base;
+        break;
+    }
+
+    riscv_find_and_load_firmware(machine, BIOS_FILENAME, start_addr, NULL);
 
     if (machine->kernel_filename) {
         uint64_t kernel_entry = riscv_load_kernel(machine->kernel_filename,
@@ -424,13 +450,9 @@ static void sifive_u_machine_init(MachineState *machine)
         }
     }
 
-    if (s->start_in_flash) {
-        start_addr = memmap[SIFIVE_U_FLASH0].base;
-    }
-
     /* reset vector */
     uint32_t reset_vec[8] = {
-        0x00000000,
+        s->msel,                       /* MSEL pin state */
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(dtb) */
         0x01c28593,                    /*     addi   a1, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
@@ -502,7 +524,8 @@ static void sifive_u_machine_instance_init(Object *obj)
                              sifive_u_machine_set_start_in_flash);
     object_property_set_description(obj, "start-in-flash",
                                     "Set on to tell QEMU's ROM to jump to "
-                                    "flash. Otherwise QEMU will jump to DRAM");
+                                    "flash. Otherwise QEMU will jump to DRAM "
+                                    "or L2LIM depending on the msel value");
 
     s->msel = 0;
     object_property_add(obj, "msel", "uint32",

diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index f6d10ebfb6b7c2feb781be4d95881139ac868ed1..27dc35e0a30aaa5168f8f470c6ca066671678e3a 100644 (file)
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -111,6 +111,12 @@ enum {
     SIFIVE_U_RTCCLK_FREQ = 1000000
 };
 
+enum {
+    MSEL_MEMMAP_QSPI0_FLASH = 1,
+    MSEL_L2LIM_QSPI0_FLASH = 6,
+    MSEL_L2LIM_QSPI2_SD = 11
+};
+
 #define SIFIVE_U_MANAGEMENT_CPU_COUNT   1
 #define SIFIVE_U_COMPUTE_CPU_COUNT      4