]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
ixgbe: fix regression on some 82598 adapters
authorDon Skidmore <donald.c.skidmore@intel.com>
Thu, 2 Jul 2009 12:50:31 +0000 (12:50 +0000)
committerDavid S. Miller <davem@davemloft.net>
Sat, 4 Jul 2009 02:11:00 +0000 (19:11 -0700)
The change to check the SFP+ module again on open() was
causing the XFP (non-SFP+) adapters to be rejected. We
only want to try and re-identify the SFP+ module if the
original probe found that this device was an SFP+ device.
So for this code path (driver loaded with SFP module, module
inserted, ifconfig up of the device) the type will be
ixgbe_phy_unknown for an unidentified SFP+ module.  So we
only check if that is the case.

This problem also shows up on Copper devices.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ixgbe/ixgbe_main.c

index aaf482c0d520da6ea9b73c4829260b3af136c55a..cf39f5a47037432d3a037d5b37c156f754b7d114 100644 (file)
@@ -2697,19 +2697,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 
        /*
         * For hot-pluggable SFP+ devices, a new SFP+ module may have
-        * arrived before interrupts were enabled.  We need to kick off
-        * the SFP+ module setup first, then try to bring up link.
+        * arrived before interrupts were enabled but after probe.  Such
+        * devices wouldn't have their type identified yet. We need to
+        * kick off the SFP+ module setup first, then try to bring up link.
         * If we're not hot-pluggable SFP+, we just need to configure link
         * and bring it up.
         */
-       err = hw->phy.ops.identify(hw);
-       if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-               dev_err(&adapter->pdev->dev, "failed to initialize because "
-                       "an unsupported SFP+ module type was detected.\n"
-                       "Reload the driver after installing a supported "
-                       "module.\n");
-               ixgbe_down(adapter);
-               return err;
+       if (hw->phy.type == ixgbe_phy_unknown) {
+               err = hw->phy.ops.identify(hw);
+               if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+                       dev_err(&adapter->pdev->dev, "failed to initialize "
+                               "because an unsupported SFP+ module type "
+                               "was detected.\n"
+                               "Reload the driver after installing a "
+                               "supported module.\n");
+                       ixgbe_down(adapter);
+                       return err;
+               }
        }
 
        if (ixgbe_is_sfp(hw)) {