return 0;
}
-u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset)
-{
- u32 result = 0;
-
- #define TEST_BIT(name) test_bit(ETHTOOL_LINK_MODE_ ## name ## _BIT, \
- linkset)
-
- if (TEST_BIT(10baseT_Half))
- result |= (1 << MC_CMD_PHY_CAP_10HDX_LBN);
- if (TEST_BIT(10baseT_Full))
- result |= (1 << MC_CMD_PHY_CAP_10FDX_LBN);
- if (TEST_BIT(100baseT_Half))
- result |= (1 << MC_CMD_PHY_CAP_100HDX_LBN);
- if (TEST_BIT(100baseT_Full))
- result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
- if (TEST_BIT(1000baseT_Half))
- result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
- if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full))
- result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
- if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full))
- result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
- if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full))
- result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN);
- if (TEST_BIT(100000baseCR4_Full))
- result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN);
- if (TEST_BIT(25000baseCR_Full))
- result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN);
- if (TEST_BIT(50000baseCR2_Full))
- result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);
- if (TEST_BIT(Pause))
- result |= (1 << MC_CMD_PHY_CAP_PAUSE_LBN);
- if (TEST_BIT(Asym_Pause))
- result |= (1 << MC_CMD_PHY_CAP_ASYM_LBN);
- if (TEST_BIT(Autoneg))
- result |= (1 << MC_CMD_PHY_CAP_AN_LBN);
-
- #undef TEST_BIT
-
- return result;
-}
-
-u32 efx_get_mcdi_phy_flags(struct efx_nic *efx)
-{
- struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
- enum efx_phy_mode mode, supported;
- u32 flags;
-
- /* TODO: Advertise the capabilities supported by this PHY */
- supported = 0;
- if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_TXDIS_LBN))
- supported |= PHY_MODE_TX_DISABLED;
- if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_LOWPOWER_LBN))
- supported |= PHY_MODE_LOW_POWER;
- if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_POWEROFF_LBN))
- supported |= PHY_MODE_OFF;
-
- mode = efx->phy_mode & supported;
-
- flags = 0;
- if (mode & PHY_MODE_TX_DISABLED)
- flags |= (1 << MC_CMD_SET_LINK_IN_TXDIS_LBN);
- if (mode & PHY_MODE_LOW_POWER)
- flags |= (1 << MC_CMD_SET_LINK_IN_LOWPOWER_LBN);
- if (mode & PHY_MODE_OFF)
- flags |= (1 << MC_CMD_SET_LINK_IN_POWEROFF_LBN);
-
- return flags;
-}
-
-u8 mcdi_to_ethtool_media(u32 media)
-{
- switch (media) {
- case MC_CMD_MEDIA_XAUI:
- case MC_CMD_MEDIA_CX4:
- case MC_CMD_MEDIA_KX4:
- return PORT_OTHER;
-
- case MC_CMD_MEDIA_XFP:
- case MC_CMD_MEDIA_SFP_PLUS:
- case MC_CMD_MEDIA_QSFP_PLUS:
- return PORT_FIBRE;
-
- case MC_CMD_MEDIA_BASE_T:
- return PORT_TP;
-
- default:
- return PORT_OTHER;
- }
-}
-
-/* The semantics of the ethtool FEC mode bitmask are not well defined,
- * particularly the meaning of combinations of bits. Which means we get to
- * define our own semantics, as follows:
- * OFF overrides any other bits, and means "disable all FEC" (with the
- * exception of 25G KR4/CR4, where it is not possible to reject it if AN
- * partner requests it).
- * AUTO on its own means use cable requirements and link partner autoneg with
- * fw-default preferences for the cable type.
- * AUTO and either RS or BASER means use the specified FEC type if cable and
- * link partner support it, otherwise autoneg/fw-default.
- * RS or BASER alone means use the specified FEC type if cable and link partner
- * support it and either requests it, otherwise no FEC.
- * Both RS and BASER (whether AUTO or not) means use FEC if cable and link
- * partner support it, preferring RS to BASER.
- */
-u32 ethtool_fec_caps_to_mcdi(u32 ethtool_cap)
-{
- u32 ret = 0;
-
- if (ethtool_cap & ETHTOOL_FEC_OFF)
- return 0;
-
- if (ethtool_cap & ETHTOOL_FEC_AUTO)
- ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) |
- (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) |
- (1 << MC_CMD_PHY_CAP_RS_FEC_LBN);
- if (ethtool_cap & ETHTOOL_FEC_RS)
- ret |= (1 << MC_CMD_PHY_CAP_RS_FEC_LBN) |
- (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN);
- if (ethtool_cap & ETHTOOL_FEC_BASER)
- ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) |
- (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) |
- (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN) |
- (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN);
- return ret;
-}
-
-/* Invert ethtool_fec_caps_to_mcdi. There are two combinations that function
- * can never produce, (baser xor rs) and neither req; the implementation below
- * maps both of those to AUTO. This should never matter, and it's not clear
- * what a better mapping would be anyway.
- */
-u32 mcdi_fec_caps_to_ethtool(u32 caps, bool is_25g)
-{
- bool rs = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_LBN),
- rs_req = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN),
- baser = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN)
- : caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN),
- baser_req = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN)
- : caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN);
-
- if (!baser && !rs)
- return ETHTOOL_FEC_OFF;
- return (rs_req ? ETHTOOL_FEC_RS : 0) |
- (baser_req ? ETHTOOL_FEC_BASER : 0) |
- (baser == baser_req && rs == rs_req ? 0 : ETHTOOL_FEC_AUTO);
-}
-
static int efx_mcdi_phy_probe(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data;
#undef SET_BIT
}
+u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset)
+{
+ u32 result = 0;
+
+ #define TEST_BIT(name) test_bit(ETHTOOL_LINK_MODE_ ## name ## _BIT, \
+ linkset)
+
+ if (TEST_BIT(10baseT_Half))
+ result |= (1 << MC_CMD_PHY_CAP_10HDX_LBN);
+ if (TEST_BIT(10baseT_Full))
+ result |= (1 << MC_CMD_PHY_CAP_10FDX_LBN);
+ if (TEST_BIT(100baseT_Half))
+ result |= (1 << MC_CMD_PHY_CAP_100HDX_LBN);
+ if (TEST_BIT(100baseT_Full))
+ result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
+ if (TEST_BIT(1000baseT_Half))
+ result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
+ if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full))
+ result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
+ if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full))
+ result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
+ if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full))
+ result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN);
+ if (TEST_BIT(100000baseCR4_Full))
+ result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN);
+ if (TEST_BIT(25000baseCR_Full))
+ result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN);
+ if (TEST_BIT(50000baseCR2_Full))
+ result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);
+ if (TEST_BIT(Pause))
+ result |= (1 << MC_CMD_PHY_CAP_PAUSE_LBN);
+ if (TEST_BIT(Asym_Pause))
+ result |= (1 << MC_CMD_PHY_CAP_ASYM_LBN);
+ if (TEST_BIT(Autoneg))
+ result |= (1 << MC_CMD_PHY_CAP_AN_LBN);
+
+ #undef TEST_BIT
+
+ return result;
+}
+
+u32 efx_get_mcdi_phy_flags(struct efx_nic *efx)
+{
+ struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
+ enum efx_phy_mode mode, supported;
+ u32 flags;
+
+ /* TODO: Advertise the capabilities supported by this PHY */
+ supported = 0;
+ if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_TXDIS_LBN))
+ supported |= PHY_MODE_TX_DISABLED;
+ if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_LOWPOWER_LBN))
+ supported |= PHY_MODE_LOW_POWER;
+ if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_POWEROFF_LBN))
+ supported |= PHY_MODE_OFF;
+
+ mode = efx->phy_mode & supported;
+
+ flags = 0;
+ if (mode & PHY_MODE_TX_DISABLED)
+ flags |= (1 << MC_CMD_SET_LINK_IN_TXDIS_LBN);
+ if (mode & PHY_MODE_LOW_POWER)
+ flags |= (1 << MC_CMD_SET_LINK_IN_LOWPOWER_LBN);
+ if (mode & PHY_MODE_OFF)
+ flags |= (1 << MC_CMD_SET_LINK_IN_POWEROFF_LBN);
+
+ return flags;
+}
+
+u8 mcdi_to_ethtool_media(u32 media)
+{
+ switch (media) {
+ case MC_CMD_MEDIA_XAUI:
+ case MC_CMD_MEDIA_CX4:
+ case MC_CMD_MEDIA_KX4:
+ return PORT_OTHER;
+
+ case MC_CMD_MEDIA_XFP:
+ case MC_CMD_MEDIA_SFP_PLUS:
+ case MC_CMD_MEDIA_QSFP_PLUS:
+ return PORT_FIBRE;
+
+ case MC_CMD_MEDIA_BASE_T:
+ return PORT_TP;
+
+ default:
+ return PORT_OTHER;
+ }
+}
+
void efx_mcdi_phy_decode_link(struct efx_nic *efx,
struct efx_link_state *link_state,
u32 speed, u32 flags, u32 fcntl)
link_state->fd = !!(flags & (1 << MC_CMD_GET_LINK_OUT_FULL_DUPLEX_LBN));
link_state->speed = speed;
}
+
+/* The semantics of the ethtool FEC mode bitmask are not well defined,
+ * particularly the meaning of combinations of bits. Which means we get to
+ * define our own semantics, as follows:
+ * OFF overrides any other bits, and means "disable all FEC" (with the
+ * exception of 25G KR4/CR4, where it is not possible to reject it if AN
+ * partner requests it).
+ * AUTO on its own means use cable requirements and link partner autoneg with
+ * fw-default preferences for the cable type.
+ * AUTO and either RS or BASER means use the specified FEC type if cable and
+ * link partner support it, otherwise autoneg/fw-default.
+ * RS or BASER alone means use the specified FEC type if cable and link partner
+ * support it and either requests it, otherwise no FEC.
+ * Both RS and BASER (whether AUTO or not) means use FEC if cable and link
+ * partner support it, preferring RS to BASER.
+ */
+u32 ethtool_fec_caps_to_mcdi(u32 ethtool_cap)
+{
+ u32 ret = 0;
+
+ if (ethtool_cap & ETHTOOL_FEC_OFF)
+ return 0;
+
+ if (ethtool_cap & ETHTOOL_FEC_AUTO)
+ ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) |
+ (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) |
+ (1 << MC_CMD_PHY_CAP_RS_FEC_LBN);
+ if (ethtool_cap & ETHTOOL_FEC_RS)
+ ret |= (1 << MC_CMD_PHY_CAP_RS_FEC_LBN) |
+ (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN);
+ if (ethtool_cap & ETHTOOL_FEC_BASER)
+ ret |= (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN) |
+ (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN) |
+ (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN) |
+ (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN);
+ return ret;
+}
+
+/* Invert ethtool_fec_caps_to_mcdi. There are two combinations that function
+ * can never produce, (baser xor rs) and neither req; the implementation below
+ * maps both of those to AUTO. This should never matter, and it's not clear
+ * what a better mapping would be anyway.
+ */
+u32 mcdi_fec_caps_to_ethtool(u32 caps, bool is_25g)
+{
+ bool rs = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_LBN),
+ rs_req = caps & (1 << MC_CMD_PHY_CAP_RS_FEC_REQUESTED_LBN),
+ baser = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_LBN)
+ : caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_LBN),
+ baser_req = is_25g ? caps & (1 << MC_CMD_PHY_CAP_25G_BASER_FEC_REQUESTED_LBN)
+ : caps & (1 << MC_CMD_PHY_CAP_BASER_FEC_REQUESTED_LBN);
+
+ if (!baser && !rs)
+ return ETHTOOL_FEC_OFF;
+ return (rs_req ? ETHTOOL_FEC_RS : 0) |
+ (baser_req ? ETHTOOL_FEC_BASER : 0) |
+ (baser == baser_req && rs == rs_req ? 0 : ETHTOOL_FEC_AUTO);
+}
projects / mirror_ubuntu-kernels.git / commitdiff