]> git.proxmox.com Git - mirror_ubuntu-focal-kernel.git/commitdiff
mmc: add BCM2835 driver
authorStephen Warren <swarren@wwwdotorg.org>
Thu, 3 Jan 2013 05:34:49 +0000 (22:34 -0700)
committerChris Ball <cjb@laptop.org>
Mon, 11 Feb 2013 18:28:49 +0000 (13:28 -0500)
Add a very simple driver for the BCM2835 SoC, which is used in the
Raspberry Pi board.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt [new file with mode: 0644]
drivers/mmc/host/Kconfig
drivers/mmc/host/Makefile
drivers/mmc/host/sdhci-bcm2835.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt
new file mode 100644 (file)
index 0000000..59476fb
--- /dev/null
@@ -0,0 +1,18 @@
+Broadcom BCM2835 SDHCI controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the BCM2835 controller.
+
+Required properties:
+- compatible : Should be "brcm,bcm2835-sdhci".
+- clocks : The clock feeding the SDHCI controller.
+
+Example:
+
+sdhci: sdhci {
+       compatible = "brcm,bcm2835-sdhci";
+       reg = <0x7e300000 0x100>;
+       interrupts = <2 30>;
+       clocks = <&clk_mmc>;
+       bus-width = <4>;
+};
index 8d13c6594520094c82f054628b1086bfe5cc7bec..66a54aa68e25c2834cd1d59f156ed75b8bd2bed3 100644 (file)
@@ -241,6 +241,17 @@ config MMC_SDHCI_S3C_DMA
 
          YMMV.
 
+config MMC_SDHCI_BCM2835
+       tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
+       depends on ARCH_BCM2835
+       depends on MMC_SDHCI_PLTFM
+       select MMC_SDHCI_IO_ACCESSORS
+       help
+         This selects the BCM2835 SD/MMC controller. If you have a BCM2835
+         platform with SD or MMC devices, say Y or M here.
+
+         If unsure, say N.
+
 config MMC_OMAP
        tristate "TI OMAP Multimedia Card Interface support"
        depends on ARCH_OMAP
index e4e218c930bda626b6d9b62a30bcb5792817c458..d5ea072207ec6eb823a34b88bafce1174a6edb59 100644 (file)
@@ -58,6 +58,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE)          += sdhci-dove.o
 obj-$(CONFIG_MMC_SDHCI_TEGRA)          += sdhci-tegra.o
 obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)       += sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)                += sdhci-of-hlwd.o
+obj-$(CONFIG_MMC_SDHCI_BCM2835)                += sdhci-bcm2835.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
        CFLAGS-cb710-mmc        += -DDEBUG
diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
new file mode 100644 (file)
index 0000000..453825f
--- /dev/null
@@ -0,0 +1,227 @@
+/*
+ * BCM2835 SDHCI
+ * Copyright (C) 2012 Stephen Warren
+ * Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me
+ * Portions of the code there were obviously based on the Linux kernel at:
+ * git://github.com/raspberrypi/linux.git rpi-3.6.y
+ * commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+
+/*
+ * 400KHz is max freq for card ID etc. Use that as min card clock. We need to
+ * know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY.
+ */
+#define MIN_FREQ 400000
+
+/*
+ * The Arasan has a bugette whereby it may lose the content of successive
+ * writes to registers that are within two SD-card clock cycles of each other
+ * (a clock domain crossing problem). It seems, however, that the data
+ * register does not have this problem, which is just as well - otherwise we'd
+ * have to nobble the DMA engine too.
+ *
+ * This should probably be dynamically calculated based on the actual card
+ * frequency. However, this is the longest we'll have to wait, and doesn't
+ * seem to slow access down too much, so the added complexity doesn't seem
+ * worth it for now.
+ *
+ * 1/MIN_FREQ is (max) time per tick of eMMC clock.
+ * 2/MIN_FREQ is time for two ticks.
+ * Multiply by 1000000 to get uS per two ticks.
+ * *1000000 for uSecs.
+ * +1 for hack rounding.
+ */
+#define BCM2835_SDHCI_WRITE_DELAY      (((2 * 1000000) / MIN_FREQ) + 1)
+
+struct bcm2835_sdhci {
+       struct clk *clk;
+       u32 shadow;
+};
+
+static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
+{
+       writel(val, host->ioaddr + reg);
+
+       udelay(BCM2835_SDHCI_WRITE_DELAY);
+}
+
+static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
+{
+       u32 val = readl(host->ioaddr + reg);
+
+       if (reg == SDHCI_CAPABILITIES)
+               val |= SDHCI_CAN_VDD_330;
+
+       return val;
+}
+
+static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+       struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv;
+       u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow :
+               bcm2835_sdhci_readl(host, reg & ~3);
+       u32 word_num = (reg >> 1) & 1;
+       u32 word_shift = word_num * 16;
+       u32 mask = 0xffff << word_shift;
+       u32 newval = (oldval & ~mask) | (val << word_shift);
+
+       if (reg == SDHCI_TRANSFER_MODE)
+               bcm2835_host->shadow = newval;
+       else
+               bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
+{
+       u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+       u32 word_num = (reg >> 1) & 1;
+       u32 word_shift = word_num * 16;
+       u32 word = (val >> word_shift) & 0xffff;
+
+       return word;
+}
+
+static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+       u32 oldval = bcm2835_sdhci_readl(host, reg & ~3);
+       u32 byte_num = reg & 3;
+       u32 byte_shift = byte_num * 8;
+       u32 mask = 0xff << byte_shift;
+       u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+       bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
+{
+       u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+       u32 byte_num = reg & 3;
+       u32 byte_shift = byte_num * 8;
+       u32 byte = (val >> byte_shift) & 0xff;
+
+       return byte;
+}
+
+static unsigned int bcm2835_sdhci_get_max_clock(struct sdhci_host *host)
+{
+       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+       struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv;
+
+       return clk_get_rate(bcm2835_host->clk);
+}
+
+unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host)
+{
+       return MIN_FREQ;
+}
+
+unsigned int bcm2835_sdhci_get_timeout_clock(struct sdhci_host *host)
+{
+       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+       struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv;
+
+       return clk_get_rate(bcm2835_host->clk);
+}
+
+static struct sdhci_ops bcm2835_sdhci_ops = {
+       .write_l = bcm2835_sdhci_writel,
+       .write_w = bcm2835_sdhci_writew,
+       .write_b = bcm2835_sdhci_writeb,
+       .read_l = bcm2835_sdhci_readl,
+       .read_w = bcm2835_sdhci_readw,
+       .read_b = bcm2835_sdhci_readb,
+       .get_max_clock = bcm2835_sdhci_get_max_clock,
+       .get_min_clock = bcm2835_sdhci_get_min_clock,
+       .get_timeout_clock = bcm2835_sdhci_get_timeout_clock,
+};
+
+static struct sdhci_pltfm_data bcm2835_sdhci_pdata = {
+       .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+       .ops = &bcm2835_sdhci_ops,
+};
+
+static int bcm2835_sdhci_probe(struct platform_device *pdev)
+{
+       struct sdhci_host *host;
+       struct bcm2835_sdhci *bcm2835_host;
+       struct sdhci_pltfm_host *pltfm_host;
+       int ret;
+
+       host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata);
+       if (IS_ERR(host))
+               return PTR_ERR(host);
+
+       bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host),
+                                       GFP_KERNEL);
+       if (!bcm2835_host) {
+               dev_err(mmc_dev(host->mmc),
+                       "failed to allocate bcm2835_sdhci\n");
+               return -ENOMEM;
+       }
+
+       pltfm_host = sdhci_priv(host);
+       pltfm_host->priv = bcm2835_host;
+
+       bcm2835_host->clk = devm_clk_get(&pdev->dev, NULL);
+       if (IS_ERR(bcm2835_host->clk)) {
+               ret = PTR_ERR(bcm2835_host->clk);
+               goto err;
+       }
+
+       return sdhci_add_host(host);
+
+err:
+       sdhci_pltfm_free(pdev);
+       return ret;
+}
+
+static int bcm2835_sdhci_remove(struct platform_device *pdev)
+{
+       struct sdhci_host *host = platform_get_drvdata(pdev);
+       int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+       sdhci_remove_host(host, dead);
+       sdhci_pltfm_free(pdev);
+
+       return 0;
+}
+
+static const struct of_device_id bcm2835_sdhci_of_match[] = {
+       { .compatible = "brcm,bcm2835-sdhci" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match);
+
+static struct platform_driver bcm2835_sdhci_driver = {
+       .driver = {
+               .name = "sdhci-bcm2835",
+               .owner = THIS_MODULE,
+               .of_match_table = bcm2835_sdhci_of_match,
+               .pm = SDHCI_PLTFM_PMOPS,
+       },
+       .probe = bcm2835_sdhci_probe,
+       .remove = bcm2835_sdhci_remove,
+};
+module_platform_driver(bcm2835_sdhci_driver);
+
+MODULE_DESCRIPTION("BCM2835 SDHCI driver");
+MODULE_AUTHOR("Stephen Warren");
+MODULE_LICENSE("GPL v2");