Run specified binary instead of /init from the ramdisk,
used for early userspace startup. See initrd.
- reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
- Format: <reboot_mode>[,<reboot_mode2>[,...]]
- See arch/*/kernel/reboot.c or arch/*/kernel/process.c
+ reboot= [KNL]
+ Format (x86 or x86_64):
+ [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \
+ [[,]s[mp]#### \
+ [[,]b[ios] | a[cpi] | k[bd] | t[riple] | e[fi] | p[ci]] \
+ [[,]f[orce]
+ Where reboot_mode is one of warm (soft) or cold (hard) or gpio,
+ reboot_type is one of bios, acpi, kbd, triple, efi, or pci,
+ reboot_force is either force or not specified,
+ reboot_cpu is s[mp]#### with #### being the processor
+ to be used for rebooting.
relax_domain_level=
[KNL, SMP] Set scheduler's default relax_domain_level.
default_idle();
}
-enum reboot_mode reboot_mode = REBOOT_HARD;
-
-static int __init reboot_setup(char *str)
-{
- if ('s' == str[0])
- reboot_mode = REBOOT_SOFT;
- return 1;
-}
-__setup("reboot=", reboot_setup);
-
/*
* Called by kexec, immediately prior to machine_kexec().
*
local_irq_enable();
}
-static enum reboot_mode reboot_mode = REBOOT_HARD;
-
-int __init reboot_setup(char *str)
-{
- if ('s' == str[0])
- reboot_mode = REBOOT_SOFT;
- return 1;
-}
-__setup("reboot=", reboot_setup);
-
void machine_halt(void)
{
gpio_set_value(GPO_SOFT_OFF, 0);
#ifndef _ASM_X86_EMERGENCY_RESTART_H
#define _ASM_X86_EMERGENCY_RESTART_H
-enum reboot_type {
- BOOT_TRIPLE = 't',
- BOOT_KBD = 'k',
- BOOT_BIOS = 'b',
- BOOT_ACPI = 'a',
- BOOT_EFI = 'e',
- BOOT_CF9 = 'p',
- BOOT_CF9_COND = 'q',
-};
-
-extern enum reboot_type reboot_type;
-
extern void machine_emergency_restart(void);
#endif /* _ASM_X86_EMERGENCY_RESTART_H */
#include <linux/kdebug.h>
#include <linux/delay.h>
#include <linux/crash_dump.h>
+#include <linux/reboot.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
#include <asm/ipi.h>
#include <asm/smp.h>
#include <asm/x86_init.h>
-#include <asm/emergency-restart.h>
#include <asm/nmi.h>
/* BMC sets a bit this MMR non-zero before sending an NMI */
EXPORT_SYMBOL(pm_power_off);
static const struct desc_ptr no_idt = {};
-static enum reboot_mode reboot_mode;
-enum reboot_type reboot_type = BOOT_ACPI;
-int reboot_force;
-
-/*
- * This variable is used privately to keep track of whether or not
- * reboot_type is still set to its default value (i.e., reboot= hasn't
- * been set on the command line). This is needed so that we can
- * suppress DMI scanning for reboot quirks. Without it, it's
- * impossible to override a faulty reboot quirk without recompiling.
- */
-static int reboot_default = 1;
-
-#ifdef CONFIG_SMP
-static int reboot_cpu = -1;
-#endif
/*
* This is set if we need to go through the 'emergency' path.
/* This is set by the PCI code if either type 1 or type 2 PCI is detected */
bool port_cf9_safe = false;
-/*
- * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
- * warm Don't set the cold reboot flag
- * cold Set the cold reboot flag
- * bios Reboot by jumping through the BIOS
- * smp Reboot by executing reset on BSP or other CPU
- * triple Force a triple fault (init)
- * kbd Use the keyboard controller. cold reset (default)
- * acpi Use the RESET_REG in the FADT
- * efi Use efi reset_system runtime service
- * pci Use the so-called "PCI reset register", CF9
- * force Avoid anything that could hang.
- */
-static int __init reboot_setup(char *str)
-{
- for (;;) {
- /*
- * Having anything passed on the command line via
- * reboot= will cause us to disable DMI checking
- * below.
- */
- reboot_default = 0;
-
- switch (*str) {
- case 'w':
- reboot_mode = REBOOT_WARM;
- break;
-
- case 'c':
- reboot_mode = REBOOT_COLD;
- break;
-
-#ifdef CONFIG_SMP
- case 's':
- if (isdigit(*(str+1))) {
- reboot_cpu = (int) (*(str+1) - '0');
- if (isdigit(*(str+2)))
- reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0');
- }
- /*
- * We will leave sorting out the final value
- * when we are ready to reboot, since we might not
- * have detected BSP APIC ID or smp_num_cpu
- */
- break;
-#endif /* CONFIG_SMP */
-
- case 'b':
- case 'a':
- case 'k':
- case 't':
- case 'e':
- case 'p':
- reboot_type = *str;
- break;
-
- case 'f':
- reboot_force = 1;
- break;
- }
-
- str = strchr(str, ',');
- if (str)
- str++;
- else
- break;
- }
- return 1;
-}
-
-__setup("reboot=", reboot_setup);
-
-
/*
* Reboot options and system auto-detection code provided by
* Dell Inc. so their systems "just work". :-)
{
/* Stop the cpus and apics */
#ifdef CONFIG_SMP
-
- /* The boot cpu is always logical cpu 0 */
- int reboot_cpu_id = 0;
-
- /* See if there has been given a command line override */
- if ((reboot_cpu != -1) && (reboot_cpu < nr_cpu_ids) &&
- cpu_online(reboot_cpu))
- reboot_cpu_id = reboot_cpu;
-
- /* Make certain the cpu I'm about to reboot on is online */
- if (!cpu_online(reboot_cpu_id))
- reboot_cpu_id = smp_processor_id();
-
- /* Make certain I only run on the appropriate processor */
- set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
-
/*
- * O.K Now that I'm on the appropriate processor, stop all of the
- * others. Also disable the local irq to not receive the per-cpu
- * timer interrupt which may trigger scheduler's load balance.
+ * Stop all of the others. Also disable the local irq to
+ * not receive the per-cpu timer interrupt which may trigger
+ * scheduler's load balance.
*/
local_irq_disable();
stop_other_cpus();
REBOOT_SOFT,
REBOOT_GPIO,
};
+extern enum reboot_mode reboot_mode;
+
+enum reboot_type {
+ BOOT_TRIPLE = 't',
+ BOOT_KBD = 'k',
+ BOOT_BIOS = 'b',
+ BOOT_ACPI = 'a',
+ BOOT_EFI = 'e',
+ BOOT_CF9 = 'p',
+ BOOT_CF9_COND = 'q',
+};
+extern enum reboot_type reboot_type;
+
+extern int reboot_default;
+extern int reboot_cpu;
+extern int reboot_force;
+
extern int register_reboot_notifier(struct notifier_block *);
extern int unregister_reboot_notifier(struct notifier_block *);
#define pr_fmt(fmt) "reboot: " fmt
+#include <linux/ctype.h>
#include <linux/export.h>
#include <linux/kexec.h>
#include <linux/kmod.h>
struct pid *cad_pid;
EXPORT_SYMBOL(cad_pid);
+#if defined(CONFIG_ARM) || defined(CONFIG_UNICORE32)
+#define DEFAULT_REBOOT_MODE = REBOOT_HARD
+#else
+#define DEFAULT_REBOOT_MODE
+#endif
+enum reboot_mode reboot_mode DEFAULT_REBOOT_MODE;
+
+int reboot_default;
+int reboot_cpu;
+enum reboot_type reboot_type = BOOT_ACPI;
+int reboot_force;
+
/*
* If set, this is used for preparing the system to power off.
*/
static void migrate_to_reboot_cpu(void)
{
/* The boot cpu is always logical cpu 0 */
- int cpu = 0;
+ int cpu = reboot_cpu;
cpu_hotplug_disable();
return 0;
}
EXPORT_SYMBOL_GPL(orderly_poweroff);
+
+static int __init reboot_setup(char *str)
+{
+ for (;;) {
+ /*
+ * Having anything passed on the command line via
+ * reboot= will cause us to disable DMI checking
+ * below.
+ */
+ reboot_default = 0;
+
+ switch (*str) {
+ case 'w':
+ reboot_mode = REBOOT_WARM;
+ break;
+
+ case 'c':
+ reboot_mode = REBOOT_COLD;
+ break;
+
+ case 'h':
+ reboot_mode = REBOOT_HARD;
+ break;
+
+ case 's':
+ if (isdigit(*(str+1)))
+ reboot_cpu = simple_strtoul(str+1, NULL, 0);
+ else if (str[1] == 'm' && str[2] == 'p' &&
+ isdigit(*(str+3)))
+ reboot_cpu = simple_strtoul(str+3, NULL, 0);
+ else
+ reboot_mode = REBOOT_SOFT;
+ break;
+
+ case 'g':
+ reboot_mode = REBOOT_GPIO;
+ break;
+
+ case 'b':
+ case 'a':
+ case 'k':
+ case 't':
+ case 'e':
+ case 'p':
+ reboot_type = *str;
+ break;
+
+ case 'f':
+ reboot_force = 1;
+ break;
+ }
+
+ str = strchr(str, ',');
+ if (str)
+ str++;
+ else
+ break;
+ }
+ return 1;
+}
+__setup("reboot=", reboot_setup);
projects / mirror_ubuntu-kernels.git / commitdiff