]> git.proxmox.com Git - mirror_ubuntu-kernels.git/commitdiff
ARM: 6406/1: at91sam9g45: fix i2c bus speed
authorPeter Korsgaard <jacmet@sunsite.dk>
Wed, 22 Sep 2010 20:29:59 +0000 (21:29 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 23 Sep 2010 14:08:48 +0000 (15:08 +0100)
Use a correct udelay value to get bus speed around 100KHz. The udelay
value was most likely copied from the older devices, but the 9g45
is signicantly faster (400MHz, DDR, ..), so a udelay of 2 gives a
bus speed of around 190KHz, which is too fast for some devices.
A udelay value of 5 gives a bus speed of around 90KHz here.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-at91/at91sam9g45_devices.c

index 5e71ccd5e7d381ca211d1f73653351bdca814c6b..1276babf84d540ad253d06eb089f29d57beab1a7 100644 (file)
@@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
        .sda_is_open_drain      = 1,
        .scl_pin                = AT91_PIN_PA21,
        .scl_is_open_drain      = 1,
-       .udelay                 = 2,            /* ~100 kHz */
+       .udelay                 = 5,            /* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
@@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
        .sda_is_open_drain      = 1,
        .scl_pin                = AT91_PIN_PB11,
        .scl_is_open_drain      = 1,
-       .udelay                 = 2,            /* ~100 kHz */
+       .udelay                 = 5,            /* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi1_device = {