struct drm_bridge bridge;
struct drm_bridge *next;
+
+ struct drm_bridge_timings timings;
};
static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
static enum drm_mode_status thc63_mode_valid(struct drm_bridge *bridge,
const struct drm_display_mode *mode)
{
+ struct thc63_dev *thc63 = to_thc63(bridge);
+ unsigned int min_freq;
+ unsigned int max_freq;
+
/*
- * The THC63LVD1024 clock frequency range is 8 to 135 MHz in single-in
- * mode. Note that the limits are different in dual-in, single-out mode,
- * and will need to be adjusted accordingly.
+ * The THC63LVD1024 pixel rate range is 8 to 135 MHz in all modes but
+ * dual-in, single-out where it is 40 to 150 MHz. As dual-in, dual-out
+ * isn't supported by the driver yet, simply derive the limits from the
+ * input mode.
*/
- if (mode->clock < 8000)
+ if (thc63->timings.dual_link) {
+ min_freq = 40000;
+ max_freq = 150000;
+ } else {
+ min_freq = 8000;
+ max_freq = 135000;
+ }
+
+ if (mode->clock < min_freq)
return MODE_CLOCK_LOW;
- if (mode->clock > 135000)
+ if (mode->clock > max_freq)
return MODE_CLOCK_HIGH;
return MODE_OK;
static int thc63_parse_dt(struct thc63_dev *thc63)
{
- struct device_node *thc63_out;
+ struct device_node *endpoint;
struct device_node *remote;
- thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
- THC63_RGB_OUT0, -1);
- if (!thc63_out) {
+ endpoint = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
+ THC63_RGB_OUT0, -1);
+ if (!endpoint) {
dev_err(thc63->dev, "Missing endpoint in port@%u\n",
THC63_RGB_OUT0);
return -ENODEV;
}
- remote = of_graph_get_remote_port_parent(thc63_out);
- of_node_put(thc63_out);
+ remote = of_graph_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
if (!remote) {
dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
THC63_RGB_OUT0);
if (!thc63->next)
return -EPROBE_DEFER;
+ endpoint = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
+ THC63_LVDS_IN1, -1);
+ if (endpoint) {
+ remote = of_graph_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
+
+ if (remote) {
+ if (of_device_is_available(remote))
+ thc63->timings.dual_link = true;
+ of_node_put(remote);
+ }
+ }
+
+ dev_dbg(thc63->dev, "operating in %s-link mode\n",
+ thc63->timings.dual_link ? "dual" : "single");
+
return 0;
}
thc63->bridge.driver_private = thc63;
thc63->bridge.of_node = pdev->dev.of_node;
thc63->bridge.funcs = &thc63_bridge_func;
+ thc63->bridge.timings = &thc63->timings;
drm_bridge_add(&thc63->bridge);