]> git.proxmox.com Git - mirror_ubuntu-disco-kernel.git/commitdiff
brcmfmac: setup SDIO reset behavior
authorPiotr Haber <phaber@broadcom.com>
Thu, 11 Apr 2013 11:28:52 +0000 (13:28 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 12 Apr 2013 18:27:55 +0000 (14:27 -0400)
Set device in a manner that SDIO I/O card reset
will lead to WLAN backplane and PMU state reset.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
include/linux/bcma/bcma_driver_chipcommon.h

index d24eb66d324d13b1fb59bf9aa4bbbd236ab97083..c06bb083c45983c455cc50abab5d6d4606bd2a04 100644 (file)
@@ -3635,7 +3635,6 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
        int err = 0;
        int reg_addr;
        u32 reg_val;
-       u8 idx;
 
        bus->alp_only = true;
 
@@ -3686,12 +3685,37 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
                goto fail;
        }
 
-       /* Set core control so an SDIO reset does a backplane reset */
-       idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
-       reg_addr = bus->ci->c_inf[idx].base +
-                  offsetof(struct sdpcmd_regs, corecontrol);
-       reg_val = brcmf_sdio_regrl(bus->sdiodev, reg_addr, NULL);
-       brcmf_sdio_regwl(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN, NULL);
+       /* Set card control so an SDIO card reset does a WLAN backplane reset */
+       reg_val = brcmf_sdio_regrb(bus->sdiodev,
+                                  SDIO_CCCR_BRCM_CARDCTRL, &err);
+       if (err)
+               goto fail;
+
+       reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
+
+       brcmf_sdio_regwb(bus->sdiodev,
+                        SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+       if (err)
+               goto fail;
+
+       /* set PMUControl so a backplane reset does PMU state reload */
+       reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base,
+                              pmucontrol);
+       reg_val = brcmf_sdio_regrl(bus->sdiodev,
+                                  reg_addr,
+                                  &err);
+       if (err)
+               goto fail;
+
+       reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
+
+       brcmf_sdio_regwl(bus->sdiodev,
+                        reg_addr,
+                        reg_val,
+                        &err);
+       if (err)
+               goto fail;
+
 
        sdio_release_host(bus->sdiodev->func[1]);
 
index b9b397b59965091846d123878beee218ea20b010..28ed3cc9f35ad6e65827219fc17682f2115b70c9 100644 (file)
@@ -52,6 +52,8 @@
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT   0x02
 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT       0x04
 #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC       0x08
+#define SDIO_CCCR_BRCM_CARDCTRL                0xf1
+#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET      0x02
 #define SDIO_CCCR_BRCM_SEPINT                  0xf2
 
 #define  SDIO_SEPINT_MASK              0x01
index 453fcc914683a396a825d6ef7a3b636da0547392..b8b09eac60a403b678bfa2965862de2703cdd5c9 100644 (file)
 #define BCMA_CC_PMU_CTL                        0x0600 /* PMU control */
 #define  BCMA_CC_PMU_CTL_ILP_DIV       0xFFFF0000 /* ILP div mask */
 #define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
+#define  BCMA_CC_PMU_CTL_RES           0x00006000 /* reset control mask */
+#define  BCMA_CC_PMU_CTL_RES_SHIFT     13
+#define  BCMA_CC_PMU_CTL_RES_RELOAD    0x2     /* reload POR values */
 #define  BCMA_CC_PMU_CTL_PLL_UPD       0x00000400
 #define  BCMA_CC_PMU_CTL_NOILPONW      0x00000200 /* No ILP on wait */
 #define  BCMA_CC_PMU_CTL_HTREQEN       0x00000100 /* HT req enable */