]> git.proxmox.com Git - mirror_ubuntu-disco-kernel.git/commitdiff
x86: Clean up late e820 resource allocation
authorLinus Torvalds <torvalds@linux-foundation.org>
Sat, 1 Nov 2008 17:17:22 +0000 (10:17 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sat, 1 Nov 2008 17:17:22 +0000 (10:17 -0700)
This makes the late e820 resources use 'insert_resource_expand_to_fit()'
instead of doing a 'reserve_region_with_split()', and also avoids
marking them as IORESOURCE_BUSY.

This results in us being perfectly happy to use pre-existing PCI
resources even if they were marked as being in a reserved region, while
still avoiding any _new_ allocations in the reserved regions.  It also
makes for a simpler and more accurate resource tree.

Example resource allocation from Jonathan Corbet, who has firmware that
has an e820 reserved entry that covered a big range (e0000000-fed003ff),
and that had various PCI resources in it set up by firmware.

With old kernels, the reserved range would force us to re-allocate all
pre-existing PCI resources, and his reserved range would end up looking
like this:

e0000000-fed003ff : reserved
  fec00000-fec00fff : IOAPIC 0
  fed00000-fed003ff : HPET 0

where only the pre-allocated special regions (IOAPIC and HPET) were kept
around.

With 2.6.28-rc2, which uses 'reserve_region_with_split()', Jonathan's
resource tree looked like this:

e0000000-fe7fffff : reserved
fe800000-fe8fffff : PCI Bus 0000:01
 fe800000-fe8fffff : reserved
fe900000-fe9d9aff : reserved
fe9d9b00-fe9d9bff : 0000:00:1f.3
 fe9d9b00-fe9d9bff : reserved
fe9d9c00-fe9d9fff : 0000:00:1a.7
 fe9d9c00-fe9d9fff : reserved
fe9da000-fe9dafff : 0000:00:03.3
 fe9da000-fe9dafff : reserved
fe9db000-fe9dbfff : 0000:00:19.0
 fe9db000-fe9dbfff : reserved
fe9dc000-fe9dffff : 0000:00:1b.0
 fe9dc000-fe9dffff : reserved
fe9e0000-fe9fffff : 0000:00:19.0
 fe9e0000-fe9fffff : reserved
fea00000-fea7ffff : 0000:00:02.0
 fea00000-fea7ffff : reserved
fea80000-feafffff : 0000:00:02.1
 fea80000-feafffff : reserved
feb00000-febfffff : 0000:00:02.0
 feb00000-febfffff : reserved
fec00000-fed003ff : reserved
 fec00000-fec00fff : IOAPIC 0
 fed00000-fed003ff : HPET 0

and because the reserved entry had been split and moved into the
individual resources, and because it used the IORESOURCE_BUSY flag, the
drivers that actually wanted to _use_ those resources couldn't actually
attach to them:

e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff]
HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff]

with this patch, the resource tree instead becomes

e0000000-fed003ff : reserved
  fe800000-fe8fffff : PCI Bus 0000:01
  fe9d9b00-fe9d9bff : 0000:00:1f.3
  fe9d9c00-fe9d9fff : 0000:00:1a.7
    fe9d9c00-fe9d9fff : ehci_hcd
  fe9da000-fe9dafff : 0000:00:03.3
  fe9db000-fe9dbfff : 0000:00:19.0
    fe9db000-fe9dbfff : e1000e
  fe9dc000-fe9dffff : 0000:00:1b.0
    fe9dc000-fe9dffff : ICH HD audio
  fe9e0000-fe9fffff : 0000:00:19.0
    fe9e0000-fe9fffff : e1000e
  fea00000-fea7ffff : 0000:00:02.0
  fea80000-feafffff : 0000:00:02.1
  feb00000-febfffff : 0000:00:02.0
  fec00000-fec00fff : IOAPIC 0
  fed00000-fed003ff : HPET 0

ie the one reserved region now ends up surrounding all the PCI resources
that were allocated inside of it by firmware, and because it is not
marked BUSY, drivers have no problem attaching to the pre-allocated
resources.

Reported-and-tested-by: Jonathan Corbet <corbet@lwn.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/x86/kernel/e820.c

index ce97bf3bed12d71ee6d1fce3ca5bb67b4ac53156..7aafeb5263efbbb8de9e7aad35680d2d882a0882 100644 (file)
@@ -1290,15 +1290,17 @@ void __init e820_reserve_resources(void)
                res->start = e820.map[i].addr;
                res->end = end;
 
-               res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+               res->flags = IORESOURCE_MEM;
 
                /*
                 * don't register the region that could be conflicted with
                 * pci device BAR resource and insert them later in
                 * pcibios_resource_survey()
                 */
-               if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20))
+               if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) {
+                       res->flags |= IORESOURCE_BUSY;
                        insert_resource(&iomem_resource, res);
+               }
                res++;
        }
 
@@ -1318,7 +1320,7 @@ void __init e820_reserve_resources_late(void)
        res = e820_res;
        for (i = 0; i < e820.nr_map; i++) {
                if (!res->parent && res->end)
-                       reserve_region_with_split(&iomem_resource, res->start, res->end, res->name);
+                       insert_resource_expand_to_fit(&iomem_resource, res);
                res++;
        }
 }