include/video/cyblafb.h: remove it, it's unused

commit ddb53d48da5b0e691f35e703ac29118747f86c99 ("fbdev: remove cyblafb
driver") removed drivers/video/cyblafb.c, but not its .h file

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/include/video/cyblafb.h b/include/video/cyblafb.h
deleted file mode 100644 (file)
index d3c1d4e..0000000
--- a/include/video/cyblafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-
-#ifndef CYBLAFB_DEBUG
-#define CYBLAFB_DEBUG 0
-#endif
-
-#if CYBLAFB_DEBUG
-#define debug(f,a...)  printk("%s:" f,  __func__ , ## a);
-#else
-#define debug(f,a...)
-#endif
-
-#define output(f, a...) printk("cyblafb: " f, ## a)
-
-#define Kb     (1024)
-#define Mb     (Kb*Kb)
-
-/* PCI IDS of supported cards temporarily here */
-
-#define CYBERBLADEi1   0x8500
-
-/* these defines are for 'lcd' variable */
-#define LCD_STRETCH    0
-#define LCD_CENTER     1
-#define LCD_BIOS       2
-
-/* display types */
-#define DISPLAY_CRT    0
-#define DISPLAY_FP     1
-
-#define ROP_S  0xCC
-
-#define point(x,y) ((y)<<16|(x))
-
-//
-// Attribute Regs, ARxx, 3c0/3c1
-//
-#define AR00   0x00
-#define AR01   0x01
-#define AR02   0x02
-#define AR03   0x03
-#define AR04   0x04
-#define AR05   0x05
-#define AR06   0x06
-#define AR07   0x07
-#define AR08   0x08
-#define AR09   0x09
-#define AR0A   0x0A
-#define AR0B   0x0B
-#define AR0C   0x0C
-#define AR0D   0x0D
-#define AR0E   0x0E
-#define AR0F   0x0F
-#define AR10   0x10
-#define AR12   0x12
-#define AR13   0x13
-
-//
-// Sequencer Regs, SRxx, 3c4/3c5
-//
-#define SR00   0x00
-#define SR01   0x01
-#define SR02   0x02
-#define SR03   0x03
-#define SR04   0x04
-#define SR0D   0x0D
-#define SR0E   0x0E
-#define SR11   0x11
-#define SR18   0x18
-#define SR19   0x19
-
-//
-//
-//
-#define CR00   0x00
-#define CR01   0x01
-#define CR02   0x02
-#define CR03   0x03
-#define CR04   0x04
-#define CR05   0x05
-#define CR06   0x06
-#define CR07   0x07
-#define CR08   0x08
-#define CR09   0x09
-#define CR0A   0x0A
-#define CR0B   0x0B
-#define CR0C   0x0C
-#define CR0D   0x0D
-#define CR0E   0x0E
-#define CR0F   0x0F
-#define CR10   0x10
-#define CR11   0x11
-#define CR12   0x12
-#define CR13   0x13
-#define CR14   0x14
-#define CR15   0x15
-#define CR16   0x16
-#define CR17   0x17
-#define CR18   0x18
-#define CR19   0x19
-#define CR1A   0x1A
-#define CR1B   0x1B
-#define CR1C   0x1C
-#define CR1D   0x1D
-#define CR1E   0x1E
-#define CR1F   0x1F
-#define CR20   0x20
-#define CR21   0x21
-#define CR27   0x27
-#define CR29   0x29
-#define CR2A   0x2A
-#define CR2B   0x2B
-#define CR2D   0x2D
-#define CR2F   0x2F
-#define CR36   0x36
-#define CR38   0x38
-#define CR39   0x39
-#define CR3A   0x3A
-#define CR55   0x55
-#define CR56   0x56
-#define CR57   0x57
-#define CR58   0x58
-
-//
-//
-//
-
-#define GR00   0x01
-#define GR01   0x01
-#define GR02   0x02
-#define GR03   0x03
-#define GR04   0x04
-#define GR05   0x05
-#define GR06   0x06
-#define GR07   0x07
-#define GR08   0x08
-#define GR0F   0x0F
-#define GR20   0x20
-#define GR23   0x23
-#define GR2F   0x2F
-#define GR30   0x30
-#define GR31   0x31
-#define GR33   0x33
-#define GR52   0x52
-#define GR53   0x53
-#define GR5D   0x5d
-
-
-//
-// Graphics Engine
-//
-#define GEBase 0x2100          // could be mapped elsewhere if we like it
-#define GE00   (GEBase+0x00)   // source 1, p 111
-#define GE04   (GEBase+0x04)   // source 2, p 111
-#define GE08   (GEBase+0x08)   // destination 1, p 111
-#define GE0C   (GEBase+0x0C)   // destination 2, p 112
-#define GE10   (GEBase+0x10)   // right view base & enable, p 112
-#define GE13   (GEBase+0x13)   // left view base & enable, p 112
-#define GE18   (GEBase+0x18)   // block write start address, p 112
-#define GE1C   (GEBase+0x1C)   // block write end address, p 112
-#define GE20   (GEBase+0x20)   // engine status, p 113
-#define GE24   (GEBase+0x24)   // reset all GE pointers
-#define GE44   (GEBase+0x44)   // command register, p 126
-#define GE48   (GEBase+0x48)   // raster operation, p 127
-#define GE60   (GEBase+0x60)   // foreground color, p 128
-#define GE64   (GEBase+0x64)   // background color, p 128
-#define GE6C   (GEBase+0x6C)   // Pattern and Style, p 129, ok
-#define GE9C   (GEBase+0x9C)   // pixel engine data port, p 125
-#define GEB8   (GEBase+0xB8)   // Destination Stride / Buffer Base 0, p 133
-#define GEBC   (GEBase+0xBC)   // Destination Stride / Buffer Base 1, p 133
-#define GEC0   (GEBase+0xC0)   // Destination Stride / Buffer Base 2, p 133
-#define GEC4   (GEBase+0xC4)   // Destination Stride / Buffer Base 3, p 133
-#define GEC8   (GEBase+0xC8)   // Source Stride / Buffer Base 0, p 133
-#define GECC   (GEBase+0xCC)   // Source Stride / Buffer Base 1, p 133
-#define GED0   (GEBase+0xD0)   // Source Stride / Buffer Base 2, p 133
-#define GED4   (GEBase+0xD4)   // Source Stride / Buffer Base 3, p 133