]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
radeonfb: Fix resume from D3Cold on some platforms
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Thu, 5 Feb 2009 01:06:52 +0000 (12:06 +1100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sun, 8 Feb 2009 18:48:57 +0000 (10:48 -0800)
For historical reason, this driver used its own saving/restoring
of the PCI config space, and used the state of it on resume as
an indication as to whether it needed to re-POST the chip or not.

This methods breaks with the later core changes since the core will
have restored things for us.

This patch fixes it by removing that custom code, using standard
core methods to save/restore state, and testing for the need to
re-POST by comparing the content of a few key PLL registers.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/aty/radeon_pm.c
drivers/video/aty/radeonfb.h

index c4ac2a032fcb3b579648627b35eb3d72797bd8c5..ca5f0dc28546ec742f33d77579aa472556aa1375 100644 (file)
@@ -2509,9 +2509,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
 
 static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 {
-       u16 pwr_cmd;
        u32 tmp;
-       int i;
 
        if (!rinfo->pm_reg)
                return;
@@ -2557,32 +2555,14 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
                        }
                }
 
-               for (i = 0; i < 64; ++i)
-                       pci_read_config_dword(rinfo->pdev, i * 4,
-                                             &rinfo->cfg_save[i]);
-
                /* Switch PCI power management to D2. */
                pci_disable_device(rinfo->pdev);
-               for (;;) {
-                       pci_read_config_word(
-                               rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
-                               &pwr_cmd);
-                       if (pwr_cmd & 2)
-                               break;                  
-                       pci_write_config_word(
-                               rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
-                               (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
-                       mdelay(500);
-               }
+               pci_save_state(rinfo->pdev);
+               pci_set_power_state(rinfo->pdev, PCI_D2);
        } else {
                printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
                       pci_name(rinfo->pdev));
 
-               /* Switch back PCI powermanagment to D0 */
-               mdelay(200);
-               pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
-               mdelay(500);
-
                if (rinfo->family <= CHIP_FAMILY_RV250) {
                        /* Reset the SDRAM controller  */
                        radeon_pm_full_reset_sdram(rinfo);
@@ -2598,37 +2578,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
        }
 }
 
-static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo)
-{
-       int i;
-       static u32 radeon_cfg_after_resume[64];
-
-       for (i = 0; i < 64; ++i)
-               pci_read_config_dword(rinfo->pdev, i * 4,
-                                     &radeon_cfg_after_resume[i]);
-
-       if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4]
-           == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4])
-               return 0;       /* assume everything is ok */
-
-       for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) {
-               if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i])
-                       pci_write_config_dword(rinfo->pdev, i * 4,
-                                              rinfo->cfg_save[i]);
-       }
-       pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE,
-                             rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]);
-       pci_write_config_word(rinfo->pdev, PCI_COMMAND,
-                             rinfo->cfg_save[PCI_COMMAND/4]);
-       return 1;
-}
-
-
 int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
         struct fb_info *info = pci_get_drvdata(pdev);
         struct radeonfb_info *rinfo = info->par;
-       int i;
 
        if (mesg.event == pdev->dev.power.power_state.event)
                return 0;
@@ -2674,6 +2627,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
        pmac_suspend_agp_for_card(pdev);
 #endif /* CONFIG_PPC_PMAC */
 
+       /* It's unclear whether or when the generic code will do that, so let's
+        * do it ourselves. We save state before we do any power management
+        */
+       pci_save_state(pdev);
+
        /* If we support wakeup from poweroff, we save all regs we can including cfg
         * space
         */
@@ -2698,9 +2656,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
                        mdelay(20);
                        OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
                }
-               // FIXME: Use PCI layer
-               for (i = 0; i < 64; ++i)
-                       pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
                pci_disable_device(pdev);
        }
        /* If we support D2, we go to it (should be fixed later with a flag forcing
@@ -2717,6 +2672,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
        return 0;
 }
 
+static int radeon_check_power_loss(struct radeonfb_info *rinfo)
+{
+       return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) ||
+              rinfo->save_regs[2] != INPLL(MCLK_CNTL) ||
+              rinfo->save_regs[3] != INPLL(SCLK_CNTL);
+}
+
 int radeonfb_pci_resume(struct pci_dev *pdev)
 {
         struct fb_info *info = pci_get_drvdata(pdev);
@@ -2735,20 +2697,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
        printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
               pci_name(pdev), pdev->dev.power.power_state.event);
 
-
-       if (pci_enable_device(pdev)) {
-               rc = -ENODEV;
-               printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n",
-                      pci_name(pdev));
-               goto bail;
-       }
-       pci_set_master(pdev);
-
+       /* PCI state will have been restored by the core, so
+        * we should be in D0 now with our config space fully
+        * restored
+        */
        if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-               /* Wakeup chip. Check from config space if we were powered off
-                * (todo: additionally, check CLK_PIN_CNTL too)
-                */
-               if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) {
+               /* Wakeup chip */
+               if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) {
                        if (rinfo->reinit_func != NULL)
                                rinfo->reinit_func(rinfo);
                        else {
index 3ea1b00fdd22ae66e882fc764359920ab8a609c5..7351e66c7f54e6d385740838ec4eb6f4c17af613 100644 (file)
@@ -361,8 +361,6 @@ struct radeonfb_info {
 #ifdef CONFIG_FB_RADEON_I2C
        struct radeon_i2c_chan  i2c[4];
 #endif
-
-       u32                     cfg_save[64];
 };