]> git.proxmox.com Git - mirror_ubuntu-disco-kernel.git/commitdiff
bnx2x: Fix recovery flow cleanup during probe
authorYuval Mintz <yuvalmin@broadcom.com>
Thu, 9 Aug 2012 04:37:26 +0000 (04:37 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 9 Aug 2012 23:19:34 +0000 (16:19 -0700)
During probe, every function probed clears the recovery registers from
all functions on its path - thus signaling that given a future recovery
event, there will be no need to wait for those functions.

This is a flawed behaviour - each function should only be responsible
for its own bit.

Since this registers are handled during the load/unload routines,
this cleanup is removed altogether.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

index 5384a6dd155fddeb7b1791ea2b1c26d33f606ca1..02b5a343b19506a2edc60be5dd6b41d781aadb85 100644 (file)
@@ -4041,20 +4041,6 @@ static bool bnx2x_get_load_status(struct bnx2x *bp, int engine)
        return val != 0;
 }
 
-/*
- * Reset the load status for the current engine.
- */
-static void bnx2x_clear_load_status(struct bnx2x *bp)
-{
-       u32 val;
-       u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK :
-                   BNX2X_PATH0_LOAD_CNT_MASK);
-       bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
-       val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG);
-       REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask));
-       bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG);
-}
-
 static void _print_next_block(int idx, const char *blk)
 {
        pr_cont("%s%s", idx ? ", " : "", blk);
@@ -11428,9 +11414,6 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
        if (!chip_is_e1x)
                REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
 
-       /* Reset the load counter */
-       bnx2x_clear_load_status(bp);
-
        dev->watchdog_timeo = TX_TIMEOUT;
 
        dev->netdev_ops = &bnx2x_netdev_ops;