Say Y here to compile support for HCI BCSP protocol.
-config BT_HCIUART_BCSP_TXCRC
- bool "Transmit CRC with every BCSP packet"
- depends on BT_HCIUART_BCSP
- help
- If you say Y here, a 16-bit CRC checksum will be transmitted along with
- every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip.
- This increases reliability, but slightly reduces efficiency.
-
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
* $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $
*/
-#define VERSION "0.2"
+#define VERSION "0.3"
#include <linux/config.h>
#include <linux/module.h>
#define BT_DBG( A... )
#endif
+static int txcrc = 1;
static int hciextn = 1;
/* ---- BCSP CRC calculation ---- */
{
struct sk_buff *nskb;
u8 hdr[4], chan;
- int rel, i;
-
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
u16 BCSP_CRC_INIT(bcsp_txmsg_crc);
-#endif
+ int rel, i;
switch (pkt_type) {
case HCI_ACLDATA_PKT:
BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq);
bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07;
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- hdr[0] |= 0x40;
-#endif
+
+ if (bcsp->use_crc)
+ hdr[0] |= 0x40;
hdr[1] = ((len << 4) & 0xff) | chan;
hdr[2] = len >> 4;
/* Put BCSP header */
for (i = 0; i < 4; i++) {
bcsp_slip_one_byte(nskb, hdr[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
}
/* Put payload */
for (i = 0; i < len; i++) {
bcsp_slip_one_byte(nskb, data[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
/* Put CRC */
- bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
- bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
- bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
-#endif
+ if (bcsp->use_crc) {
+ bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
+ bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
+ bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
+ }
bcsp_slip_msgdelim(nskb);
return nskb;
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+ if (txcrc)
+ bcsp->use_crc = 1;
+
return 0;
}
return hci_uart_unregister_proto(&bcsp);
}
+module_param(txcrc, bool, 0644);
+MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet");
+
module_param(hciextn, bool, 0644);
MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets");