#define NAND_BBT_LASTBLOCK 0x00000010
/* The bbt is at the given page, else we must scan for the bbt */
#define NAND_BBT_ABSPAGE 0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH 0x00000040
/* bbt is stored per chip on multichip devices */
#define NAND_BBT_PERCHIP 0x00000080
/* bbt has a version counter at offset veroffs */
Required properties:
- compatible : "atmel,at91rm9200-nand".
- reg : should specify localbus address and size used for the chip,
- and if availlable the ECC.
+ and hardware ECC controller if available.
+ If the hardware ECC is PMECC, it should contain address and size for
+ PMECC, PMECC Error Location controller and ROM which has lookup tables.
- atmel,nand-addr-offset : offset for the address latch.
- atmel,nand-cmd-offset : offset for the command latch.
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
"soft_bch".
+- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware.
+ Only supported by at91sam9x5 or later sam9 product.
+- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
+ Controller. Supported values are: 2, 4, 8, 12, 24.
+- atmel,pmecc-sector-size : sector size for ECC computation. Supported values
+ are: 512, 1024.
+- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
+ for different sector size. First one is for sector size 512, the next is for
+ sector size 1024.
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
...
};
};
+
+/* for PMECC supported chips */
+nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = < 0x40000000 0x10000000 /* bus addr & size */
+ 0xffffe000 0x00000600 /* PMECC addr & size */
+ 0xffffe600 0x00000200 /* PMECC ERRLOC addr & size */
+ 0x00100000 0x00100000 /* ROM addr & size */
+ >;
+ atmel,nand-addr-offset = <21>; /* ale */
+ atmel,nand-cmd-offset = <22>; /* cle */
+ nand-on-flash-bbt;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc; /* enable PMECC */
+ atmel,pmecc-cap = <2>;
+ atmel,pmecc-sector-size = <512>;
+ atmel,pmecc-lookup-table-offset = <0x8000 0x10000>;
+ gpios = <&pioD 5 0 /* rdy */
+ &pioD 4 0 /* nce */
+ 0 /* cd */
+ >;
+ partition@0 {
+ ...
+ };
+};
- interrupt-names : The interrupt names "gpmi-dma", "bch";
- fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+Optional properties:
+ - nand-on-flash-bbt: boolean to enable on flash bbt option if not
+ present false
+
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
--- /dev/null
+NXP LPC32xx SoC NAND MLC controller
+
+Required properties:
+- compatible: "nxp,lpc3220-mlc"
+- reg: Address and size of the controller
+- interrupts: The NAND interrupt specification
+- gpios: GPIO specification for NAND write protect
+
+The following required properties are very controller specific. See the LPC32xx
+User Manual 7.5.14 MLC NAND Timing Register (the values here are specified in
+Hz, to make them independent of actual clock speed and to provide for good
+accuracy:)
+- nxp,tcea_delay: TCEA_DELAY
+- nxp,busy_delay: BUSY_DELAY
+- nxp,nand_ta: NAND_TA
+- nxp,rd_high: RD_HIGH
+- nxp,rd_low: RD_LOW
+- nxp,wr_high: WR_HIGH
+- nxp,wr_low: WR_LOW
+
+Optional subnodes:
+- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+
+ mlc: flash@200A8000 {
+ compatible = "nxp,lpc3220-mlc";
+ reg = <0x200A8000 0x11000>;
+ interrupts = <11 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nxp,tcea-delay = <333333333>;
+ nxp,busy-delay = <10000000>;
+ nxp,nand-ta = <18181818>;
+ nxp,rd-high = <31250000>;
+ nxp,rd-low = <45454545>;
+ nxp,wr-high = <40000000>;
+ nxp,wr-low = <83333333>;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ mtd0@00000000 {
+ label = "boot";
+ reg = <0x00000000 0x00064000>;
+ read-only;
+ };
+
+ ...
+
+ };
--- /dev/null
+NXP LPC32xx SoC NAND SLC controller
+
+Required properties:
+- compatible: "nxp,lpc3220-slc"
+- reg: Address and size of the controller
+- nand-on-flash-bbt: Use bad block table on flash
+- gpios: GPIO specification for NAND write protect
+
+The following required properties are very controller specific. See the LPC32xx
+User Manual:
+- nxp,wdr-clks: Delay before Ready signal is tested on write (W_RDY)
+- nxp,rdr-clks: Delay before Ready signal is tested on read (R_RDY)
+(The following values are specified in Hz, to make them independent of actual
+clock speed:)
+- nxp,wwidth: Write pulse width (W_WIDTH)
+- nxp,whold: Write hold time (W_HOLD)
+- nxp,wsetup: Write setup time (W_SETUP)
+- nxp,rwidth: Read pulse width (R_WIDTH)
+- nxp,rhold: Read hold time (R_HOLD)
+- nxp,rsetup: Read setup time (R_SETUP)
+
+Optional subnodes:
+- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+
+ slc: flash@20020000 {
+ compatible = "nxp,lpc3220-slc";
+ reg = <0x20020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <40000000>;
+ nxp,whold = <100000000>;
+ nxp,wsetup = <100000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <40000000>;
+ nxp,rhold = <66666666>;
+ nxp,rsetup = <100000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ mtd0@00000000 {
+ label = "phy3250-boot";
+ reg = <0x00000000 0x00064000>;
+ read-only;
+ };
+
+ ...
+
+ };
status = "disabled";
};
+ nand@83fdb000 {
+ compatible = "fsl,imx51-nand";
+ reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
ssi3: ssi@83fe8000 {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
status = "disabled";
};
+ nand@63fdb000 {
+ compatible = "fsl,imx53-nand";
+ reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
ssi3: ssi@63fe8000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi");
+ clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand");
/* set the usboh3 parent to pll2_sw */
clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+ clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand");
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[esdhc_a_podf], 200000000);
/* AXI has to come first, that's how the mxc_nand driver expect it */
struct resource res[] = {
{
- .start = data->axibase,
- .end = data->axibase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->axibase,
+ .end = data->axibase + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device("mxc_nand", data->id,
- res + !data->axibase,
- ARRAY_SIZE(res) - !data->axibase,
+ res, ARRAY_SIZE(res) - !data->axibase,
pdata, sizeof(*pdata));
}
prompt "Flash cmd/query data swapping"
depends on MTD_CFI_ADV_OPTIONS
default MTD_CFI_NOSWAP
-
-config MTD_CFI_NOSWAP
- bool "NO"
---help---
This option defines the way in which the CPU attempts to arrange
data bits when writing the 'magic' commands to the chips. Saying
Specific arrangements are possible with the BIG_ENDIAN_BYTE and
LITTLE_ENDIAN_BYTE, if the bytes are reversed.
- If you have a LART, on which the data (and address) lines were
- connected in a fashion which ensured that the nets were as short
- as possible, resulting in a bit-shuffling which seems utterly
- random to the untrained eye, you need the LART_ENDIAN_BYTE option.
-
- Yes, there really exists something sicker than PDP-endian :)
+config MTD_CFI_NOSWAP
+ bool "NO"
config MTD_CFI_BE_BYTE_SWAP
bool "BIG_ENDIAN_BYTE"
}
}
+static int is_m29ew(struct cfi_private *cfi)
+{
+ if (cfi->mfr == CFI_MFR_INTEL &&
+ ((cfi->device_type == CFI_DEVICETYPE_X8 && (cfi->id & 0xff) == 0x7e) ||
+ (cfi->device_type == CFI_DEVICETYPE_X16 && cfi->id == 0x227e)))
+ return 1;
+ return 0;
+}
+
+/*
+ * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 20:
+ * Some revisions of the M29EW suffer from erase suspend hang ups. In
+ * particular, it can occur when the sequence
+ * Erase Confirm -> Suspend -> Program -> Resume
+ * causes a lockup due to internal timing issues. The consequence is that the
+ * erase cannot be resumed without inserting a dummy command after programming
+ * and prior to resuming. [...] The work-around is to issue a dummy write cycle
+ * that writes an F0 command code before the RESUME command.
+ */
+static void cfi_fixup_m29ew_erase_suspend(struct map_info *map,
+ unsigned long adr)
+{
+ struct cfi_private *cfi = map->fldrv_priv;
+ /* before resume, insert a dummy 0xF0 cycle for Micron M29EW devices */
+ if (is_m29ew(cfi))
+ map_write(map, CMD(0xF0), adr);
+}
+
+/*
+ * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 22:
+ *
+ * Some revisions of the M29EW (for example, A1 and A2 step revisions)
+ * are affected by a problem that could cause a hang up when an ERASE SUSPEND
+ * command is issued after an ERASE RESUME operation without waiting for a
+ * minimum delay. The result is that once the ERASE seems to be completed
+ * (no bits are toggling), the contents of the Flash memory block on which
+ * the erase was ongoing could be inconsistent with the expected values
+ * (typically, the array value is stuck to the 0xC0, 0xC4, 0x80, or 0x84
+ * values), causing a consequent failure of the ERASE operation.
+ * The occurrence of this issue could be high, especially when file system
+ * operations on the Flash are intensive. As a result, it is recommended
+ * that a patch be applied. Intensive file system operations can cause many
+ * calls to the garbage routine to free Flash space (also by erasing physical
+ * Flash blocks) and as a result, many consecutive SUSPEND and RESUME
+ * commands can occur. The problem disappears when a delay is inserted after
+ * the RESUME command by using the udelay() function available in Linux.
+ * The DELAY value must be tuned based on the customer's platform.
+ * The maximum value that fixes the problem in all cases is 500us.
+ * But, in our experience, a delay of 30 µs to 50 µs is sufficient
+ * in most cases.
+ * We have chosen 500µs because this latency is acceptable.
+ */
+static void cfi_fixup_m29ew_delay_after_resume(struct cfi_private *cfi)
+{
+ /*
+ * Resolving the Delay After Resume Issue see Micron TN-13-07
+ * Worst case delay must be 500µs but 30-50µs should be ok as well
+ */
+ if (is_m29ew(cfi))
+ cfi_udelay(500);
+}
+
struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
{
struct cfi_private *cfi = map->fldrv_priv;
switch(chip->oldstate) {
case FL_ERASING:
+ cfi_fixup_m29ew_erase_suspend(map,
+ chip->in_progress_block_addr);
map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr);
+ cfi_fixup_m29ew_delay_after_resume(cfi);
chip->oldstate = FL_READY;
chip->state = FL_ERASING;
break;
/* Disallow XIP again */
local_irq_disable();
+ /* Correct Erase Suspend Hangups for M29EW */
+ cfi_fixup_m29ew_erase_suspend(map, adr);
/* Resume the write or erase operation */
map_write(map, cfi->sector_erase_cmd, adr);
chip->state = oldstate;
doesn't support the JEDEC ID instruction.
config M25PXX_USE_FAST_READ
- bool "Use FAST_READ OPCode allowing SPI CLK <= 50MHz"
+ bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz"
depends on MTD_M25P80
default y
help
{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
{ "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
+ { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
+
/* EON -- en25xxx */
{ "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
{ "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
{ "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
{ "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
{ "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
/* Macronix */
{ "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
{ "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
{ "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
{ "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
{ "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
{ "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
{ "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
{ "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
+ { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) },
{ "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
{ "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
{ "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
#include <linux/module.h>
#include <linux/param.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/spear_smi.h>
/* copy dev->status (lower 16 bits) in order to release lock */
if (ret > 0)
ret = dev->status & 0xffff;
- else
- ret = -EIO;
+ else if (ret == 0)
+ ret = -ETIMEDOUT;
/* restore the ctrl regs state */
writel(ctrlreg1, dev->io_base + SMI_CR1);
finish = jiffies + timeout;
do {
status = spear_smi_read_sr(dev, bank);
- if (status < 0)
- continue; /* try till timeout */
- else if (!(status & SR_WIP))
+ if (status < 0) {
+ if (status == -ETIMEDOUT)
+ continue; /* try till finish */
+ return status;
+ } else if (!(status & SR_WIP)) {
return 0;
+ }
cond_resched();
} while (!time_after_eq(jiffies, finish));
dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n");
- return status;
+ return -EBUSY;
}
/**
val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8);
mutex_lock(&dev->lock);
+ /* clear all interrupt conditions */
+ writel(0, dev->io_base + SMI_SR);
+
writel(val, dev->io_base + SMI_CR1);
mutex_unlock(&dev->lock);
}
writel(ctrlreg1, dev->io_base + SMI_CR1);
writel(0, dev->io_base + SMI_CR2);
- if (ret <= 0) {
+ if (ret == 0) {
ret = -EIO;
dev_err(&dev->pdev->dev,
"smi controller failed on write enable\n");
- } else {
+ } else if (ret > 0) {
/* check whether write mode status is set for required bank */
if (dev->status & (1 << (bank + WM_SHIFT)))
ret = 0;
ret = wait_event_interruptible_timeout(dev->cmd_complete,
dev->status & TFF, SMI_CMD_TIMEOUT);
- if (ret <= 0) {
+ if (ret == 0) {
ret = -EIO;
dev_err(&dev->pdev->dev, "sector erase failed\n");
- } else
+ } else if (ret > 0)
ret = 0; /* success */
/* restore ctrl regs */
return 0;
}
-int spear_smi_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM
+static int spear_smi_suspend(struct device *dev)
{
- struct spear_smi *dev = platform_get_drvdata(pdev);
+ struct spear_smi *sdev = dev_get_drvdata(dev);
- if (dev && dev->clk)
- clk_disable_unprepare(dev->clk);
+ if (sdev && sdev->clk)
+ clk_disable_unprepare(sdev->clk);
return 0;
}
-int spear_smi_resume(struct platform_device *pdev)
+static int spear_smi_resume(struct device *dev)
{
- struct spear_smi *dev = platform_get_drvdata(pdev);
+ struct spear_smi *sdev = dev_get_drvdata(dev);
int ret = -EPERM;
- if (dev && dev->clk)
- ret = clk_prepare_enable(dev->clk);
+ if (sdev && sdev->clk)
+ ret = clk_prepare_enable(sdev->clk);
if (!ret)
- spear_smi_hw_init(dev);
+ spear_smi_hw_init(sdev);
return ret;
}
+static SIMPLE_DEV_PM_OPS(spear_smi_pm_ops, spear_smi_suspend, spear_smi_resume);
+#endif
+
#ifdef CONFIG_OF
static const struct of_device_id spear_smi_id_table[] = {
{ .compatible = "st,spear600-smi" },
.bus = &platform_bus_type,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(spear_smi_id_table),
+#ifdef CONFIG_PM
+ .pm = &spear_smi_pm_ops,
+#endif
},
.probe = spear_smi_probe,
.remove = __devexit_p(spear_smi_remove),
- .suspend = spear_smi_suspend,
- .resume = spear_smi_resume,
};
static int spear_smi_init(void)
help
Map driver to support image based filesystems for uClinux.
-config MTD_WRSBC8260
- tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
- depends on (SBC82xx || SBC8560)
- select MTD_MAP_BANK_WIDTH_4
- select MTD_MAP_BANK_WIDTH_1
- select MTD_CFI_I1
- select MTD_CFI_I4
- help
- Map driver for WindRiver PowerQUICC II MPC82xx board. Drives
- all three flash regions on CS0, CS1 and CS6 if they are configured
- correctly by the boot loader.
-
config MTD_DMV182
tristate "Map driver for Dy-4 SVME/DMV-182 board."
depends on DMV182
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
-obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
obj-$(CONFIG_MTD_DMV182) += dmv182.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
+++ /dev/null
-/*
- * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
- *
- * Copyright (C) 2004 Red Hat, Inc.
- *
- * Author: David Woodhouse <dwmw2@infradead.org>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/immap_cpm2.h>
-
-static struct mtd_info *sbcmtd[3];
-
-struct map_info sbc82xx_flash_map[3] = {
- {.name = "Boot flash"},
- {.name = "Alternate boot flash"},
- {.name = "User flash"}
-};
-
-static struct mtd_partition smallflash_parts[] = {
- {
- .name = "space",
- .size = 0x100000,
- .offset = 0,
- }, {
- .name = "bootloader",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct mtd_partition bigflash_parts[] = {
- {
- .name = "bootloader",
- .size = 0x00100000,
- .offset = 0,
- }, {
- .name = "file system",
- .size = 0x01f00000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "boot config",
- .size = 0x00100000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "space",
- .size = 0x01f00000,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static const char *part_probes[] __initconst = {"cmdlinepart", "RedBoot", NULL};
-
-#define init_sbc82xx_one_flash(map, br, or) \
-do { \
- (map).phys = (br & 1) ? (br & 0xffff8000) : 0; \
- (map).size = (br & 1) ? (~(or & 0xffff8000) + 1) : 0; \
- switch (br & 0x00001800) { \
- case 0x00000000: \
- case 0x00000800: (map).bankwidth = 1; break; \
- case 0x00001000: (map).bankwidth = 2; break; \
- case 0x00001800: (map).bankwidth = 4; break; \
- } \
-} while (0);
-
-static int __init init_sbc82xx_flash(void)
-{
- volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
- int bigflash;
- int i;
-
-#ifdef CONFIG_SBC8560
- mc = ioremap(0xff700000 + 0x5000, sizeof(memctl_cpm2_t));
-#else
- mc = &cpm2_immr->im_memctl;
-#endif
-
- bigflash = 1;
- if ((mc->memc_br0 & 0x00001800) == 0x00001800)
- bigflash = 0;
-
- init_sbc82xx_one_flash(sbc82xx_flash_map[0], mc->memc_br0, mc->memc_or0);
- init_sbc82xx_one_flash(sbc82xx_flash_map[1], mc->memc_br6, mc->memc_or6);
- init_sbc82xx_one_flash(sbc82xx_flash_map[2], mc->memc_br1, mc->memc_or1);
-
-#ifdef CONFIG_SBC8560
- iounmap((void *) mc);
-#endif
-
- for (i=0; i<3; i++) {
- int8_t flashcs[3] = { 0, 6, 1 };
- int nr_parts;
- struct mtd_partition *defparts;
-
- printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
- sbc82xx_flash_map[i].name,
- (sbc82xx_flash_map[i].size >> 20),
- flashcs[i]);
- if (!sbc82xx_flash_map[i].phys) {
- /* We know it can't be at zero. */
- printk("): disabled by bootloader.\n");
- continue;
- }
- printk(" at %08lx)\n", sbc82xx_flash_map[i].phys);
-
- sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys,
- sbc82xx_flash_map[i].size);
-
- if (!sbc82xx_flash_map[i].virt) {
- printk("Failed to ioremap\n");
- continue;
- }
-
- simple_map_init(&sbc82xx_flash_map[i]);
-
- sbcmtd[i] = do_map_probe("cfi_probe", &sbc82xx_flash_map[i]);
-
- if (!sbcmtd[i])
- continue;
-
- sbcmtd[i]->owner = THIS_MODULE;
-
- /* No partitioning detected. Use default */
- if (i == 2) {
- defparts = NULL;
- nr_parts = 0;
- } else if (i == bigflash) {
- defparts = bigflash_parts;
- nr_parts = ARRAY_SIZE(bigflash_parts);
- } else {
- defparts = smallflash_parts;
- nr_parts = ARRAY_SIZE(smallflash_parts);
- }
-
- mtd_device_parse_register(sbcmtd[i], part_probes, NULL,
- defparts, nr_parts);
- }
- return 0;
-}
-
-static void __exit cleanup_sbc82xx_flash(void)
-{
- int i;
-
- for (i=0; i<3; i++) {
- if (!sbcmtd[i])
- continue;
-
- mtd_device_unregister(sbcmtd[i]);
-
- map_destroy(sbcmtd[i]);
-
- iounmap((void *)sbc82xx_flash_map[i].virt);
- sbc82xx_flash_map[i].virt = 0;
- }
-}
-
-module_init(init_sbc82xx_flash);
-module_exit(cleanup_sbc82xx_flash);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("Flash map driver for WindRiver PowerQUICC II");
}
EXPORT_SYMBOL_GPL(mtd_panic_write);
+int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
+{
+ ops->retlen = ops->oobretlen = 0;
+ if (!mtd->_read_oob)
+ return -EOPNOTSUPP;
+ return mtd->_read_oob(mtd, from, ops);
+}
+EXPORT_SYMBOL_GPL(mtd_read_oob);
+
/*
* Method to access the protection register area, present in some flash
* devices. The user data is one time programmable but the factory data is read
cxt->nextpage = 0;
}
- while (1) {
- ret = mtd_block_isbad(mtd, cxt->nextpage * record_size);
- if (!ret)
- break;
- if (ret < 0) {
- printk(KERN_ERR "mtdoops: block_isbad failed, aborting\n");
- return;
- }
+ while ((ret = mtd_block_isbad(mtd, cxt->nextpage * record_size)) > 0) {
badblock:
printk(KERN_WARNING "mtdoops: bad block at %08lx\n",
cxt->nextpage * record_size);
}
}
+ if (ret < 0) {
+ printk(KERN_ERR "mtdoops: mtd_block_isbad failed, aborting\n");
+ return;
+ }
+
for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
ret = mtdoops_erase_block(cxt, cxt->nextpage * record_size);
help
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 and AVR32 processors.
-choice
- prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
- depends on MTD_NAND_ATMEL
-config MTD_NAND_ATMEL_ECC_HW
- bool "Hardware ECC"
- depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
+config MTD_NAND_PXA3xx
+ tristate "Support for NAND flash devices on PXA3xx"
+ depends on PXA3xx || ARCH_MMP
help
- Use hardware ECC instead of software ECC when the chip
- supports it.
-
- The hardware ECC controller is capable of single bit error
- correction and 2-bit random detection per page.
-
- NB : hardware and software ECC schemes are incompatible.
- If you switch from one to another, you'll have to erase your
- mtd partition.
-
- If unsure, say Y
+ This enables the driver for the NAND flash device found on
+ PXA3xx processors
-config MTD_NAND_ATMEL_ECC_SOFT
- bool "Software ECC"
+config MTD_NAND_SLC_LPC32XX
+ tristate "NXP LPC32xx SLC Controller"
+ depends on ARCH_LPC32XX
help
- Use software ECC.
+ Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
+ chips) NAND controller. This is the default for the PHYTEC 3250
+ reference board which contains a NAND256R3A2CZA6 chip.
- NB : hardware and software ECC schemes are incompatible.
- If you switch from one to another, you'll have to erase your
- mtd partition.
+ Please check the actual NAND chip connected and its support
+ by the SLC NAND controller.
-config MTD_NAND_ATMEL_ECC_NONE
- bool "No ECC (testing only, DANGEROUS)"
- depends on DEBUG_KERNEL
+config MTD_NAND_MLC_LPC32XX
+ tristate "NXP LPC32xx MLC Controller"
+ depends on ARCH_LPC32XX
help
- No ECC will be used.
- It's not a good idea and it should be reserved for testing
- purpose only.
+ Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND
+ controller. This is the default for the WORK92105 controller
+ board.
- If unsure, say N
-
-endchoice
-
-config MTD_NAND_PXA3xx
- tristate "Support for NAND flash devices on PXA3xx"
- depends on PXA3xx || ARCH_MMP
- help
- This enables the driver for the NAND flash device found on
- PXA3xx processors
+ Please check the actual NAND chip connected and its support
+ by the MLC NAND controller.
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
config MTD_NAND_MXC
tristate "MXC NAND support"
- depends on IMX_HAVE_PLATFORM_MXC_NAND
+ depends on ARCH_MXC
help
This enables the driver for the NAND flash controller on the
MXC processors.
obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_MTD_NAND_FSL_IFC) += fsl_ifc_nand.o
obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
+obj-$(CONFIG_MTD_NAND_SLC_LPC32XX) += lpc32xx_slc.o
+obj-$(CONFIG_MTD_NAND_MLC_LPC32XX) += lpc32xx_mlc.o
obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
/*
- * Copyright (C) 2003 Rick Bronson
+ * Copyright © 2003 Rick Bronson
*
* Derived from drivers/mtd/nand/autcpu12.c
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ * Copyright © 2001 Thomas Gleixner (gleixner@autronix.de)
*
* Derived from drivers/mtd/spia.c
- * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+ * Copyright © 2000 Steven J. Hill (sjhill@cotw.com)
*
*
* Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
- * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright © 2007
*
* Derived from Das U-Boot source code
* (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
- * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ * © Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
*
+ * Add Programmable Multibit ECC support for various AT91 SoC
+ * © Copyright 2012 ATMEL, Hong Xu
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
struct completion comp;
struct dma_chan *dma_chan;
+
+ bool has_pmecc;
+ u8 pmecc_corr_cap;
+ u16 pmecc_sector_size;
+ u32 pmecc_lookup_table_offset;
+
+ int pmecc_bytes_per_sector;
+ int pmecc_sector_number;
+ int pmecc_degree; /* Degree of remainders */
+ int pmecc_cw_len; /* Length of codeword */
+
+ void __iomem *pmerrloc_base;
+ void __iomem *pmecc_rom_base;
+
+ /* lookup table for alpha_to and index_of */
+ void __iomem *pmecc_alpha_to;
+ void __iomem *pmecc_index_of;
+
+ /* data for pmecc computation */
+ int16_t *pmecc_partial_syn;
+ int16_t *pmecc_si;
+ int16_t *pmecc_smu; /* Sigma table */
+ int16_t *pmecc_lmu; /* polynomal order */
+ int *pmecc_mu;
+ int *pmecc_dmu;
+ int *pmecc_delta;
};
+static struct nand_ecclayout atmel_pmecc_oobinfo;
+
static int cpu_has_dma(void)
{
return cpu_is_at91sam9rl() || cpu_is_at91sam9g45();
atmel_write_buf8(mtd, buf, len);
}
+/*
+ * Return number of ecc bytes per sector according to sector size and
+ * correction capability
+ *
+ * Following table shows what at91 PMECC supported:
+ * Correction Capability Sector_512_bytes Sector_1024_bytes
+ * ===================== ================ =================
+ * 2-bits 4-bytes 4-bytes
+ * 4-bits 7-bytes 7-bytes
+ * 8-bits 13-bytes 14-bytes
+ * 12-bits 20-bytes 21-bytes
+ * 24-bits 39-bytes 42-bytes
+ */
+static int __devinit pmecc_get_ecc_bytes(int cap, int sector_size)
+{
+ int m = 12 + sector_size / 512;
+ return (m * cap + 7) / 8;
+}
+
+static void __devinit pmecc_config_ecc_layout(struct nand_ecclayout *layout,
+ int oobsize, int ecc_len)
+{
+ int i;
+
+ layout->eccbytes = ecc_len;
+
+ /* ECC will occupy the last ecc_len bytes continuously */
+ for (i = 0; i < ecc_len; i++)
+ layout->eccpos[i] = oobsize - ecc_len + i;
+
+ layout->oobfree[0].offset = 2;
+ layout->oobfree[0].length =
+ oobsize - ecc_len - layout->oobfree[0].offset;
+}
+
+static void __devinit __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
+{
+ int table_size;
+
+ table_size = host->pmecc_sector_size == 512 ?
+ PMECC_LOOKUP_TABLE_SIZE_512 : PMECC_LOOKUP_TABLE_SIZE_1024;
+
+ return host->pmecc_rom_base + host->pmecc_lookup_table_offset +
+ table_size * sizeof(int16_t);
+}
+
+static void pmecc_data_free(struct atmel_nand_host *host)
+{
+ kfree(host->pmecc_partial_syn);
+ kfree(host->pmecc_si);
+ kfree(host->pmecc_lmu);
+ kfree(host->pmecc_smu);
+ kfree(host->pmecc_mu);
+ kfree(host->pmecc_dmu);
+ kfree(host->pmecc_delta);
+}
+
+static int __devinit pmecc_data_alloc(struct atmel_nand_host *host)
+{
+ const int cap = host->pmecc_corr_cap;
+
+ host->pmecc_partial_syn = kzalloc((2 * cap + 1) * sizeof(int16_t),
+ GFP_KERNEL);
+ host->pmecc_si = kzalloc((2 * cap + 1) * sizeof(int16_t), GFP_KERNEL);
+ host->pmecc_lmu = kzalloc((cap + 1) * sizeof(int16_t), GFP_KERNEL);
+ host->pmecc_smu = kzalloc((cap + 2) * (2 * cap + 1) * sizeof(int16_t),
+ GFP_KERNEL);
+ host->pmecc_mu = kzalloc((cap + 1) * sizeof(int), GFP_KERNEL);
+ host->pmecc_dmu = kzalloc((cap + 1) * sizeof(int), GFP_KERNEL);
+ host->pmecc_delta = kzalloc((cap + 1) * sizeof(int), GFP_KERNEL);
+
+ if (host->pmecc_partial_syn &&
+ host->pmecc_si &&
+ host->pmecc_lmu &&
+ host->pmecc_smu &&
+ host->pmecc_mu &&
+ host->pmecc_dmu &&
+ host->pmecc_delta)
+ return 0;
+
+ /* error happened */
+ pmecc_data_free(host);
+ return -ENOMEM;
+}
+
+static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i;
+ uint32_t value;
+
+ /* Fill odd syndromes */
+ for (i = 0; i < host->pmecc_corr_cap; i++) {
+ value = pmecc_readl_rem_relaxed(host->ecc, sector, i / 2);
+ if (i & 1)
+ value >>= 16;
+ value &= 0xffff;
+ host->pmecc_partial_syn[(2 * i) + 1] = (int16_t)value;
+ }
+}
+
+static void pmecc_substitute(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int16_t __iomem *alpha_to = host->pmecc_alpha_to;
+ int16_t __iomem *index_of = host->pmecc_index_of;
+ int16_t *partial_syn = host->pmecc_partial_syn;
+ const int cap = host->pmecc_corr_cap;
+ int16_t *si;
+ int i, j;
+
+ /* si[] is a table that holds the current syndrome value,
+ * an element of that table belongs to the field
+ */
+ si = host->pmecc_si;
+
+ memset(&si[1], 0, sizeof(int16_t) * (2 * cap - 1));
+
+ /* Computation 2t syndromes based on S(x) */
+ /* Odd syndromes */
+ for (i = 1; i < 2 * cap; i += 2) {
+ for (j = 0; j < host->pmecc_degree; j++) {
+ if (partial_syn[i] & ((unsigned short)0x1 << j))
+ si[i] = readw_relaxed(alpha_to + i * j) ^ si[i];
+ }
+ }
+ /* Even syndrome = (Odd syndrome) ** 2 */
+ for (i = 2, j = 1; j <= cap; i = ++j << 1) {
+ if (si[j] == 0) {
+ si[i] = 0;
+ } else {
+ int16_t tmp;
+
+ tmp = readw_relaxed(index_of + si[j]);
+ tmp = (tmp * 2) % host->pmecc_cw_len;
+ si[i] = readw_relaxed(alpha_to + tmp);
+ }
+ }
+
+ return;
+}
+
+static void pmecc_get_sigma(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ int16_t *lmu = host->pmecc_lmu;
+ int16_t *si = host->pmecc_si;
+ int *mu = host->pmecc_mu;
+ int *dmu = host->pmecc_dmu; /* Discrepancy */
+ int *delta = host->pmecc_delta; /* Delta order */
+ int cw_len = host->pmecc_cw_len;
+ const int16_t cap = host->pmecc_corr_cap;
+ const int num = 2 * cap + 1;
+ int16_t __iomem *index_of = host->pmecc_index_of;
+ int16_t __iomem *alpha_to = host->pmecc_alpha_to;
+ int i, j, k;
+ uint32_t dmu_0_count, tmp;
+ int16_t *smu = host->pmecc_smu;
+
+ /* index of largest delta */
+ int ro;
+ int largest;
+ int diff;
+
+ dmu_0_count = 0;
+
+ /* First Row */
+
+ /* Mu */
+ mu[0] = -1;
+
+ memset(smu, 0, sizeof(int16_t) * num);
+ smu[0] = 1;
+
+ /* discrepancy set to 1 */
+ dmu[0] = 1;
+ /* polynom order set to 0 */
+ lmu[0] = 0;
+ delta[0] = (mu[0] * 2 - lmu[0]) >> 1;
+
+ /* Second Row */
+
+ /* Mu */
+ mu[1] = 0;
+ /* Sigma(x) set to 1 */
+ memset(&smu[num], 0, sizeof(int16_t) * num);
+ smu[num] = 1;
+
+ /* discrepancy set to S1 */
+ dmu[1] = si[1];
+
+ /* polynom order set to 0 */
+ lmu[1] = 0;
+
+ delta[1] = (mu[1] * 2 - lmu[1]) >> 1;
+
+ /* Init the Sigma(x) last row */
+ memset(&smu[(cap + 1) * num], 0, sizeof(int16_t) * num);
+
+ for (i = 1; i <= cap; i++) {
+ mu[i + 1] = i << 1;
+ /* Begin Computing Sigma (Mu+1) and L(mu) */
+ /* check if discrepancy is set to 0 */
+ if (dmu[i] == 0) {
+ dmu_0_count++;
+
+ tmp = ((cap - (lmu[i] >> 1) - 1) / 2);
+ if ((cap - (lmu[i] >> 1) - 1) & 0x1)
+ tmp += 2;
+ else
+ tmp += 1;
+
+ if (dmu_0_count == tmp) {
+ for (j = 0; j <= (lmu[i] >> 1) + 1; j++)
+ smu[(cap + 1) * num + j] =
+ smu[i * num + j];
+
+ lmu[cap + 1] = lmu[i];
+ return;
+ }
+
+ /* copy polynom */
+ for (j = 0; j <= lmu[i] >> 1; j++)
+ smu[(i + 1) * num + j] = smu[i * num + j];
+
+ /* copy previous polynom order to the next */
+ lmu[i + 1] = lmu[i];
+ } else {
+ ro = 0;
+ largest = -1;
+ /* find largest delta with dmu != 0 */
+ for (j = 0; j < i; j++) {
+ if ((dmu[j]) && (delta[j] > largest)) {
+ largest = delta[j];
+ ro = j;
+ }
+ }
+
+ /* compute difference */
+ diff = (mu[i] - mu[ro]);
+
+ /* Compute degree of the new smu polynomial */
+ if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff))
+ lmu[i + 1] = lmu[i];
+ else
+ lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2;
+
+ /* Init smu[i+1] with 0 */
+ for (k = 0; k < num; k++)
+ smu[(i + 1) * num + k] = 0;
+
+ /* Compute smu[i+1] */
+ for (k = 0; k <= lmu[ro] >> 1; k++) {
+ int16_t a, b, c;
+
+ if (!(smu[ro * num + k] && dmu[i]))
+ continue;
+ a = readw_relaxed(index_of + dmu[i]);
+ b = readw_relaxed(index_of + dmu[ro]);
+ c = readw_relaxed(index_of + smu[ro * num + k]);
+ tmp = a + (cw_len - b) + c;
+ a = readw_relaxed(alpha_to + tmp % cw_len);
+ smu[(i + 1) * num + (k + diff)] = a;
+ }
+
+ for (k = 0; k <= lmu[i] >> 1; k++)
+ smu[(i + 1) * num + k] ^= smu[i * num + k];
+ }
+
+ /* End Computing Sigma (Mu+1) and L(mu) */
+ /* In either case compute delta */
+ delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1;
+
+ /* Do not compute discrepancy for the last iteration */
+ if (i >= cap)
+ continue;
+
+ for (k = 0; k <= (lmu[i + 1] >> 1); k++) {
+ tmp = 2 * (i - 1);
+ if (k == 0) {
+ dmu[i + 1] = si[tmp + 3];
+ } else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) {
+ int16_t a, b, c;
+ a = readw_relaxed(index_of +
+ smu[(i + 1) * num + k]);
+ b = si[2 * (i - 1) + 3 - k];
+ c = readw_relaxed(index_of + b);
+ tmp = a + c;
+ tmp %= cw_len;
+ dmu[i + 1] = readw_relaxed(alpha_to + tmp) ^
+ dmu[i + 1];
+ }
+ }
+ }
+
+ return;
+}
+
+static int pmecc_err_location(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ unsigned long end_time;
+ const int cap = host->pmecc_corr_cap;
+ const int num = 2 * cap + 1;
+ int sector_size = host->pmecc_sector_size;
+ int err_nbr = 0; /* number of error */
+ int roots_nbr; /* number of roots */
+ int i;
+ uint32_t val;
+ int16_t *smu = host->pmecc_smu;
+
+ pmerrloc_writel(host->pmerrloc_base, ELDIS, PMERRLOC_DISABLE);
+
+ for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
+ pmerrloc_writel_sigma_relaxed(host->pmerrloc_base, i,
+ smu[(cap + 1) * num + i]);
+ err_nbr++;
+ }
+
+ val = (err_nbr - 1) << 16;
+ if (sector_size == 1024)
+ val |= 1;
+
+ pmerrloc_writel(host->pmerrloc_base, ELCFG, val);
+ pmerrloc_writel(host->pmerrloc_base, ELEN,
+ sector_size * 8 + host->pmecc_degree * cap);
+
+ end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+ while (!(pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR)
+ & PMERRLOC_CALC_DONE)) {
+ if (unlikely(time_after(jiffies, end_time))) {
+ dev_err(host->dev, "PMECC: Timeout to calculate error location.\n");
+ return -1;
+ }
+ cpu_relax();
+ }
+
+ roots_nbr = (pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR)
+ & PMERRLOC_ERR_NUM_MASK) >> 8;
+ /* Number of roots == degree of smu hence <= cap */
+ if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
+ return err_nbr - 1;
+
+ /* Number of roots does not match the degree of smu
+ * unable to correct error */
+ return -1;
+}
+
+static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
+ int sector_num, int extra_bytes, int err_nbr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i = 0;
+ int byte_pos, bit_pos, sector_size, pos;
+ uint32_t tmp;
+ uint8_t err_byte;
+
+ sector_size = host->pmecc_sector_size;
+
+ while (err_nbr) {
+ tmp = pmerrloc_readl_el_relaxed(host->pmerrloc_base, i) - 1;
+ byte_pos = tmp / 8;
+ bit_pos = tmp % 8;
+
+ if (byte_pos >= (sector_size + extra_bytes))
+ BUG(); /* should never happen */
+
+ if (byte_pos < sector_size) {
+ err_byte = *(buf + byte_pos);
+ *(buf + byte_pos) ^= (1 << bit_pos);
+
+ pos = sector_num * host->pmecc_sector_size + byte_pos;
+ dev_info(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ pos, bit_pos, err_byte, *(buf + byte_pos));
+ } else {
+ /* Bit flip in OOB area */
+ tmp = sector_num * host->pmecc_bytes_per_sector
+ + (byte_pos - sector_size);
+ err_byte = ecc[tmp];
+ ecc[tmp] ^= (1 << bit_pos);
+
+ pos = tmp + nand_chip->ecc.layout->eccpos[0];
+ dev_info(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ pos, bit_pos, err_byte, ecc[tmp]);
+ }
+
+ i++;
+ err_nbr--;
+ }
+
+ return;
+}
+
+static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
+ u8 *ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i, err_nbr, eccbytes;
+ uint8_t *buf_pos;
+
+ eccbytes = nand_chip->ecc.bytes;
+ for (i = 0; i < eccbytes; i++)
+ if (ecc[i] != 0xff)
+ goto normal_check;
+ /* Erased page, return OK */
+ return 0;
+
+normal_check:
+ for (i = 0; i < host->pmecc_sector_number; i++) {
+ err_nbr = 0;
+ if (pmecc_stat & 0x1) {
+ buf_pos = buf + i * host->pmecc_sector_size;
+
+ pmecc_gen_syndrome(mtd, i);
+ pmecc_substitute(mtd);
+ pmecc_get_sigma(mtd);
+
+ err_nbr = pmecc_err_location(mtd);
+ if (err_nbr == -1) {
+ dev_err(host->dev, "PMECC: Too many errors\n");
+ mtd->ecc_stats.failed++;
+ return -EIO;
+ } else {
+ pmecc_correct_data(mtd, buf_pos, ecc, i,
+ host->pmecc_bytes_per_sector, err_nbr);
+ mtd->ecc_stats.corrected += err_nbr;
+ }
+ }
+ pmecc_stat >>= 1;
+ }
+
+ return 0;
+}
+
+static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
+{
+ struct atmel_nand_host *host = chip->priv;
+ int eccsize = chip->ecc.size;
+ uint8_t *oob = chip->oob_poi;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint32_t stat;
+ unsigned long end_time;
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+ pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG)
+ & ~PMECC_CFG_WRITE_OP) | PMECC_CFG_AUTO_ENABLE);
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+
+ chip->read_buf(mtd, buf, eccsize);
+ chip->read_buf(mtd, oob, mtd->oobsize);
+
+ end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+ while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) {
+ if (unlikely(time_after(jiffies, end_time))) {
+ dev_err(host->dev, "PMECC: Timeout to get error status.\n");
+ return -EIO;
+ }
+ cpu_relax();
+ }
+
+ stat = pmecc_readl_relaxed(host->ecc, ISR);
+ if (stat != 0)
+ if (pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]) != 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
+{
+ struct atmel_nand_host *host = chip->priv;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ int i, j;
+ unsigned long end_time;
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+
+ pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG) |
+ PMECC_CFG_WRITE_OP) & ~PMECC_CFG_AUTO_ENABLE);
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+
+ chip->write_buf(mtd, (u8 *)buf, mtd->writesize);
+
+ end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+ while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) {
+ if (unlikely(time_after(jiffies, end_time))) {
+ dev_err(host->dev, "PMECC: Timeout to get ECC value.\n");
+ return -EIO;
+ }
+ cpu_relax();
+ }
+
+ for (i = 0; i < host->pmecc_sector_number; i++) {
+ for (j = 0; j < host->pmecc_bytes_per_sector; j++) {
+ int pos;
+
+ pos = i * host->pmecc_bytes_per_sector + j;
+ chip->oob_poi[eccpos[pos]] =
+ pmecc_readb_ecc_relaxed(host->ecc, i, j);
+ }
+ }
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static void atmel_pmecc_core_init(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ uint32_t val = 0;
+ struct nand_ecclayout *ecc_layout;
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+
+ switch (host->pmecc_corr_cap) {
+ case 2:
+ val = PMECC_CFG_BCH_ERR2;
+ break;
+ case 4:
+ val = PMECC_CFG_BCH_ERR4;
+ break;
+ case 8:
+ val = PMECC_CFG_BCH_ERR8;
+ break;
+ case 12:
+ val = PMECC_CFG_BCH_ERR12;
+ break;
+ case 24:
+ val = PMECC_CFG_BCH_ERR24;
+ break;
+ }
+
+ if (host->pmecc_sector_size == 512)
+ val |= PMECC_CFG_SECTOR512;
+ else if (host->pmecc_sector_size == 1024)
+ val |= PMECC_CFG_SECTOR1024;
+
+ switch (host->pmecc_sector_number) {
+ case 1:
+ val |= PMECC_CFG_PAGE_1SECTOR;
+ break;
+ case 2:
+ val |= PMECC_CFG_PAGE_2SECTORS;
+ break;
+ case 4:
+ val |= PMECC_CFG_PAGE_4SECTORS;
+ break;
+ case 8:
+ val |= PMECC_CFG_PAGE_8SECTORS;
+ break;
+ }
+
+ val |= (PMECC_CFG_READ_OP | PMECC_CFG_SPARE_DISABLE
+ | PMECC_CFG_AUTO_DISABLE);
+ pmecc_writel(host->ecc, CFG, val);
+
+ ecc_layout = nand_chip->ecc.layout;
+ pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
+ pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+ pmecc_writel(host->ecc, EADDR,
+ ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+ /* See datasheet about PMECC Clock Control Register */
+ pmecc_writel(host->ecc, CLK, 2);
+ pmecc_writel(host->ecc, IDR, 0xff);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+}
+
+static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev,
+ struct atmel_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *nand_chip = &host->nand_chip;
+ struct resource *regs, *regs_pmerr, *regs_rom;
+ int cap, sector_size, err_no;
+
+ cap = host->pmecc_corr_cap;
+ sector_size = host->pmecc_sector_size;
+ dev_info(host->dev, "Initialize PMECC params, cap: %d, sector: %d\n",
+ cap, sector_size);
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!regs) {
+ dev_warn(host->dev,
+ "Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n");
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ host->ecc = ioremap(regs->start, resource_size(regs));
+ if (host->ecc == NULL) {
+ dev_err(host->dev, "ioremap failed\n");
+ err_no = -EIO;
+ goto err_pmecc_ioremap;
+ }
+
+ regs_pmerr = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ regs_rom = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+ if (regs_pmerr && regs_rom) {
+ host->pmerrloc_base = ioremap(regs_pmerr->start,
+ resource_size(regs_pmerr));
+ host->pmecc_rom_base = ioremap(regs_rom->start,
+ resource_size(regs_rom));
+ }
+
+ if (!host->pmerrloc_base || !host->pmecc_rom_base) {
+ dev_err(host->dev,
+ "Can not get I/O resource for PMECC ERRLOC controller or ROM!\n");
+ err_no = -EIO;
+ goto err_pmloc_ioremap;
+ }
+
+ /* ECC is calculated for the whole page (1 step) */
+ nand_chip->ecc.size = mtd->writesize;
+
+ /* set ECC page size and oob layout */
+ switch (mtd->writesize) {
+ case 2048:
+ host->pmecc_degree = PMECC_GF_DIMENSION_13;
+ host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
+ host->pmecc_sector_number = mtd->writesize / sector_size;
+ host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes(
+ cap, sector_size);
+ host->pmecc_alpha_to = pmecc_get_alpha_to(host);
+ host->pmecc_index_of = host->pmecc_rom_base +
+ host->pmecc_lookup_table_offset;
+
+ nand_chip->ecc.steps = 1;
+ nand_chip->ecc.strength = cap;
+ nand_chip->ecc.bytes = host->pmecc_bytes_per_sector *
+ host->pmecc_sector_number;
+ if (nand_chip->ecc.bytes > mtd->oobsize - 2) {
+ dev_err(host->dev, "No room for ECC bytes\n");
+ err_no = -EINVAL;
+ goto err_no_ecc_room;
+ }
+ pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
+ mtd->oobsize,
+ nand_chip->ecc.bytes);
+ nand_chip->ecc.layout = &atmel_pmecc_oobinfo;
+ break;
+ case 512:
+ case 1024:
+ case 4096:
+ /* TODO */
+ dev_warn(host->dev,
+ "Unsupported page size for PMECC, use Software ECC\n");
+ default:
+ /* page size not handled by HW ECC */
+ /* switching back to soft ECC */
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ /* Allocate data for PMECC computation */
+ err_no = pmecc_data_alloc(host);
+ if (err_no) {
+ dev_err(host->dev,
+ "Cannot allocate memory for PMECC computation!\n");
+ goto err_pmecc_data_alloc;
+ }
+
+ nand_chip->ecc.read_page = atmel_nand_pmecc_read_page;
+ nand_chip->ecc.write_page = atmel_nand_pmecc_write_page;
+
+ atmel_pmecc_core_init(mtd);
+
+ return 0;
+
+err_pmecc_data_alloc:
+err_no_ecc_room:
+err_pmloc_ioremap:
+ iounmap(host->ecc);
+ if (host->pmerrloc_base)
+ iounmap(host->pmerrloc_base);
+ if (host->pmecc_rom_base)
+ iounmap(host->pmecc_rom_base);
+err_pmecc_ioremap:
+ return err_no;
+}
+
/*
* Calculate HW ECC
*
static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
- u32 val;
+ u32 val, table_offset;
+ u32 offset[2];
int ecc_mode;
struct atmel_nand_data *board = &host->board;
enum of_gpio_flags flags;
board->enable_pin = of_get_gpio(np, 1);
board->det_pin = of_get_gpio(np, 2);
+ host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc");
+
+ if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc)
+ return 0; /* Not using PMECC */
+
+ /* use PMECC, get correction capability, sector size and lookup
+ * table offset.
+ */
+ if (of_property_read_u32(np, "atmel,pmecc-cap", &val) != 0) {
+ dev_err(host->dev, "Cannot decide PMECC Capability\n");
+ return -EINVAL;
+ } else if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
+ (val != 24)) {
+ dev_err(host->dev,
+ "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n",
+ val);
+ return -EINVAL;
+ }
+ host->pmecc_corr_cap = (u8)val;
+
+ if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) != 0) {
+ dev_err(host->dev, "Cannot decide PMECC Sector Size\n");
+ return -EINVAL;
+ } else if ((val != 512) && (val != 1024)) {
+ dev_err(host->dev,
+ "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n",
+ val);
+ return -EINVAL;
+ }
+ host->pmecc_sector_size = (u16)val;
+
+ if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset",
+ offset, 2) != 0) {
+ dev_err(host->dev, "Cannot get PMECC lookup table offset\n");
+ return -EINVAL;
+ }
+ table_offset = host->pmecc_sector_size == 512 ? offset[0] : offset[1];
+
+ if (!table_offset) {
+ dev_err(host->dev, "Invalid PMECC lookup table offset\n");
+ return -EINVAL;
+ }
+ host->pmecc_lookup_table_offset = table_offset;
+
return 0;
}
#else
}
#endif
+static int __init atmel_hw_nand_init_params(struct platform_device *pdev,
+ struct atmel_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *nand_chip = &host->nand_chip;
+ struct resource *regs;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!regs) {
+ dev_err(host->dev,
+ "Can't get I/O resource regs, use software ECC\n");
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ host->ecc = ioremap(regs->start, resource_size(regs));
+ if (host->ecc == NULL) {
+ dev_err(host->dev, "ioremap failed\n");
+ return -EIO;
+ }
+
+ /* ECC is calculated for the whole page (1 step) */
+ nand_chip->ecc.size = mtd->writesize;
+
+ /* set ECC page size and oob layout */
+ switch (mtd->writesize) {
+ case 512:
+ nand_chip->ecc.layout = &atmel_oobinfo_small;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
+ break;
+ case 1024:
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
+ break;
+ case 2048:
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
+ break;
+ case 4096:
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
+ break;
+ default:
+ /* page size not handled by HW ECC */
+ /* switching back to soft ECC */
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ /* set up for HW ECC */
+ nand_chip->ecc.calculate = atmel_nand_calculate;
+ nand_chip->ecc.correct = atmel_nand_correct;
+ nand_chip->ecc.hwctl = atmel_nand_hwctl;
+ nand_chip->ecc.read_page = atmel_nand_read_page;
+ nand_chip->ecc.bytes = 4;
+ nand_chip->ecc.strength = 1;
+
+ return 0;
+}
+
/*
* Probe for the NAND device.
*/
struct atmel_nand_host *host;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
- struct resource *regs;
struct resource *mem;
struct mtd_part_parser_data ppdata = {};
int res;
nand_chip->dev_ready = atmel_nand_device_ready;
nand_chip->ecc.mode = host->board.ecc_mode;
-
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) {
- printk(KERN_ERR "atmel_nand: can't get I/O resource "
- "regs\nFalling back on software ECC\n");
- nand_chip->ecc.mode = NAND_ECC_SOFT;
- }
-
- if (nand_chip->ecc.mode == NAND_ECC_HW) {
- host->ecc = ioremap(regs->start, resource_size(regs));
- if (host->ecc == NULL) {
- printk(KERN_ERR "atmel_nand: ioremap failed\n");
- res = -EIO;
- goto err_ecc_ioremap;
- }
- nand_chip->ecc.calculate = atmel_nand_calculate;
- nand_chip->ecc.correct = atmel_nand_correct;
- nand_chip->ecc.hwctl = atmel_nand_hwctl;
- nand_chip->ecc.read_page = atmel_nand_read_page;
- nand_chip->ecc.bytes = 4;
- nand_chip->ecc.strength = 1;
- }
-
nand_chip->chip_delay = 20; /* 20us command delay time */
if (host->board.bus_width_16) /* 16-bit bus width */
}
if (nand_chip->ecc.mode == NAND_ECC_HW) {
- /* ECC is calculated for the whole page (1 step) */
- nand_chip->ecc.size = mtd->writesize;
-
- /* set ECC page size and oob layout */
- switch (mtd->writesize) {
- case 512:
- nand_chip->ecc.layout = &atmel_oobinfo_small;
- ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
- break;
- case 1024:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
- ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
- break;
- case 2048:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
- ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
- break;
- case 4096:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
- ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
- break;
- default:
- /* page size not handled by HW ECC */
- /* switching back to soft ECC */
- nand_chip->ecc.mode = NAND_ECC_SOFT;
- nand_chip->ecc.calculate = NULL;
- nand_chip->ecc.correct = NULL;
- nand_chip->ecc.hwctl = NULL;
- nand_chip->ecc.read_page = NULL;
- nand_chip->ecc.postpad = 0;
- nand_chip->ecc.prepad = 0;
- nand_chip->ecc.bytes = 0;
- break;
- }
+ if (host->has_pmecc)
+ res = atmel_pmecc_nand_init_params(pdev, host);
+ else
+ res = atmel_hw_nand_init_params(pdev, host);
+
+ if (res != 0)
+ goto err_hw_ecc;
}
/* second phase scan */
return res;
err_scan_tail:
+ if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW) {
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+ pmecc_data_free(host);
+ }
+ if (host->ecc)
+ iounmap(host->ecc);
+ if (host->pmerrloc_base)
+ iounmap(host->pmerrloc_base);
+ if (host->pmecc_rom_base)
+ iounmap(host->pmecc_rom_base);
+err_hw_ecc:
err_scan_ident:
err_no_card:
atmel_nand_disable(host);
platform_set_drvdata(pdev, NULL);
if (host->dma_chan)
dma_release_channel(host->dma_chan);
- if (host->ecc)
- iounmap(host->ecc);
-err_ecc_ioremap:
iounmap(host->io_base);
err_nand_ioremap:
kfree(host);
atmel_nand_disable(host);
+ if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW) {
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+ pmerrloc_writel(host->pmerrloc_base, ELDIS,
+ PMERRLOC_DISABLE);
+ pmecc_data_free(host);
+ }
+
if (host->ecc)
iounmap(host->ecc);
+ if (host->pmecc_rom_base)
+ iounmap(host->pmecc_rom_base);
+ if (host->pmerrloc_base)
+ iounmap(host->pmerrloc_base);
if (host->dma_chan)
dma_release_channel(host->dma_chan);
* Based on AT91SAM9260 datasheet revision B.
*
* Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2007 - 2012 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#define ATMEL_ECC_NPR 0x10 /* NParity register */
#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
+/* PMECC Register Definitions */
+#define ATMEL_PMECC_CFG 0x000 /* Configuration Register */
+#define PMECC_CFG_BCH_ERR2 (0 << 0)
+#define PMECC_CFG_BCH_ERR4 (1 << 0)
+#define PMECC_CFG_BCH_ERR8 (2 << 0)
+#define PMECC_CFG_BCH_ERR12 (3 << 0)
+#define PMECC_CFG_BCH_ERR24 (4 << 0)
+
+#define PMECC_CFG_SECTOR512 (0 << 4)
+#define PMECC_CFG_SECTOR1024 (1 << 4)
+
+#define PMECC_CFG_PAGE_1SECTOR (0 << 8)
+#define PMECC_CFG_PAGE_2SECTORS (1 << 8)
+#define PMECC_CFG_PAGE_4SECTORS (2 << 8)
+#define PMECC_CFG_PAGE_8SECTORS (3 << 8)
+
+#define PMECC_CFG_READ_OP (0 << 12)
+#define PMECC_CFG_WRITE_OP (1 << 12)
+
+#define PMECC_CFG_SPARE_ENABLE (1 << 16)
+#define PMECC_CFG_SPARE_DISABLE (0 << 16)
+
+#define PMECC_CFG_AUTO_ENABLE (1 << 20)
+#define PMECC_CFG_AUTO_DISABLE (0 << 20)
+
+#define ATMEL_PMECC_SAREA 0x004 /* Spare area size */
+#define ATMEL_PMECC_SADDR 0x008 /* PMECC starting address */
+#define ATMEL_PMECC_EADDR 0x00c /* PMECC ending address */
+#define ATMEL_PMECC_CLK 0x010 /* PMECC clock control */
+#define PMECC_CLK_133MHZ (2 << 0)
+
+#define ATMEL_PMECC_CTRL 0x014 /* PMECC control register */
+#define PMECC_CTRL_RST (1 << 0)
+#define PMECC_CTRL_DATA (1 << 1)
+#define PMECC_CTRL_USER (1 << 2)
+#define PMECC_CTRL_ENABLE (1 << 4)
+#define PMECC_CTRL_DISABLE (1 << 5)
+
+#define ATMEL_PMECC_SR 0x018 /* PMECC status register */
+#define PMECC_SR_BUSY (1 << 0)
+#define PMECC_SR_ENABLE (1 << 4)
+
+#define ATMEL_PMECC_IER 0x01c /* PMECC interrupt enable */
+#define PMECC_IER_ENABLE (1 << 0)
+#define ATMEL_PMECC_IDR 0x020 /* PMECC interrupt disable */
+#define PMECC_IER_DISABLE (1 << 0)
+#define ATMEL_PMECC_IMR 0x024 /* PMECC interrupt mask */
+#define PMECC_IER_MASK (1 << 0)
+#define ATMEL_PMECC_ISR 0x028 /* PMECC interrupt status */
+#define ATMEL_PMECC_ECCx 0x040 /* PMECC ECC x */
+#define ATMEL_PMECC_REMx 0x240 /* PMECC REM x */
+
+/* PMERRLOC Register Definitions */
+#define ATMEL_PMERRLOC_ELCFG 0x000 /* Error location config */
+#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0)
+#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0)
+#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16)
+
+#define ATMEL_PMERRLOC_ELPRIM 0x004 /* Error location primitive */
+#define ATMEL_PMERRLOC_ELEN 0x008 /* Error location enable */
+#define ATMEL_PMERRLOC_ELDIS 0x00c /* Error location disable */
+#define PMERRLOC_DISABLE (1 << 0)
+
+#define ATMEL_PMERRLOC_ELSR 0x010 /* Error location status */
+#define PMERRLOC_ELSR_BUSY (1 << 0)
+#define ATMEL_PMERRLOC_ELIER 0x014 /* Error location int enable */
+#define ATMEL_PMERRLOC_ELIDR 0x018 /* Error location int disable */
+#define ATMEL_PMERRLOC_ELIMR 0x01c /* Error location int mask */
+#define ATMEL_PMERRLOC_ELISR 0x020 /* Error location int status */
+#define PMERRLOC_ERR_NUM_MASK (0x1f << 8)
+#define PMERRLOC_CALC_DONE (1 << 0)
+#define ATMEL_PMERRLOC_SIGMAx 0x028 /* Error location SIGMA x */
+#define ATMEL_PMERRLOC_ELx 0x08c /* Error location x */
+
+/* Register access macros for PMECC */
+#define pmecc_readl_relaxed(addr, reg) \
+ readl_relaxed((addr) + ATMEL_PMECC_##reg)
+
+#define pmecc_writel(addr, reg, value) \
+ writel((value), (addr) + ATMEL_PMECC_##reg)
+
+#define pmecc_readb_ecc_relaxed(addr, sector, n) \
+ readb_relaxed((addr) + ATMEL_PMECC_ECCx + ((sector) * 0x40) + (n))
+
+#define pmecc_readl_rem_relaxed(addr, sector, n) \
+ readl_relaxed((addr) + ATMEL_PMECC_REMx + ((sector) * 0x40) + ((n) * 4))
+
+#define pmerrloc_readl_relaxed(addr, reg) \
+ readl_relaxed((addr) + ATMEL_PMERRLOC_##reg)
+
+#define pmerrloc_writel(addr, reg, value) \
+ writel((value), (addr) + ATMEL_PMERRLOC_##reg)
+
+#define pmerrloc_writel_sigma_relaxed(addr, n, value) \
+ writel_relaxed((value), (addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
+
+#define pmerrloc_readl_sigma_relaxed(addr, n) \
+ readl_relaxed((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
+
+#define pmerrloc_readl_el_relaxed(addr, n) \
+ readl_relaxed((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4))
+
+/* Galois field dimension */
+#define PMECC_GF_DIMENSION_13 13
+#define PMECC_GF_DIMENSION_14 14
+
+#define PMECC_LOOKUP_TABLE_SIZE_512 0x2000
+#define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000
+
+/* Time out value for reading PMECC status register */
+#define PMECC_MAX_TIMEOUT_MS 100
+
#endif
/* ---- Private Function Prototypes -------------------------------------- */
static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int oob_required, int page);
-static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
+static int bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf, int oob_required);
/* ---- Private Variables ------------------------------------------------ */
* @oob_required: must write chip->oob_poi to OOB
*
***************************************************************************/
-static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
+static int bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
int sectorIdx = 0;
}
bcm_umi_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
return 0;
}
-static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+static int bf5xx_nand_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
/*
* @buf: buffer to store read data
* @oob_required: caller expects OOB data read to chip->oob_poi
*
- * The hw generator calculates the error syndrome automatically. Therefor
+ * The hw generator calculates the error syndrome automatically. Therefore
* we need a special oob layout and handling.
*/
static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
};
-static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
+static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
/* Set up ECC autogeneration */
cafe->ctl2 |= (1<<30);
+
+ return 0;
}
static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
if (unlikely(raw))
- chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
+ status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
else
- chip->ecc.write_page(mtd, chip, buf, oob_required);
+ status = chip->ecc.write_page(mtd, chip, buf, oob_required);
+
+ if (status < 0)
+ return status;
/*
* Cached progamming disabled for now, Not sure if its worth the
/* writes a page. user specifies type, and this function handles the
* configuration details. */
-static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
+static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, bool raw_xfer)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
denali_enable_dma(denali, false);
dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
+
+ return 0;
}
/* NAND core entry points */
* writing a page with ECC or without is similar, all the work is done
* by write_page above.
* */
-static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
/* for regular page writes, we let HW handle all the ECC
* data written to the device. */
- write_page(mtd, chip, buf, false);
+ return write_page(mtd, chip, buf, false);
}
/* This is the callback that the NAND core calls to write a page without ECC.
* raw access is similar to ECC page writes, so all the work is done in the
* write_page() function above.
*/
-static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
/* for raw page writes, we want to disable ECC and simply write
whatever data is in the buffer. */
- write_page(mtd, chip, buf, true);
+ return write_page(mtd, chip, buf, true);
}
static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
write_nop(docptr);
}
-static void write_page(struct mtd_info *mtd, struct nand_chip *nand,
+static int write_page(struct mtd_info *mtd, struct nand_chip *nand,
const uint8_t *buf, bool use_ecc)
{
struct docg4_priv *doc = nand->priv;
write_nop(docptr);
writew(0, docptr + DOC_DATAEND);
write_nop(docptr);
+
+ return 0;
}
-static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+static int docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
const uint8_t *buf, int oob_required)
{
return write_page(mtd, nand, buf, false);
}
-static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
+static int docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
const uint8_t *buf, int oob_required)
{
return write_page(mtd, nand, buf, true);
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
-static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- chip->options = NAND_NO_READRDY;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->controller = &elbc_fcm_ctrl->controller;
elbc_fcm_ctrl->chips[bank] = priv;
priv->bank = bank;
priv->ctrl = fsl_lbc_ctrl_dev;
- priv->dev = dev;
+ priv->dev = &pdev->dev;
+ dev_set_drvdata(priv->dev, priv);
priv->vbase = ioremap(res.start, resource_size(&res));
if (!priv->vbase) {
static int fsl_elbc_nand_remove(struct platform_device *pdev)
{
- int i;
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
- for (i = 0; i < MAX_BANKS; i++)
- if (elbc_fcm_ctrl->chips[i])
- fsl_elbc_chip_remove(elbc_fcm_ctrl->chips[i]);
+ struct fsl_elbc_mtd *priv = dev_get_drvdata(&pdev->dev);
+
+ fsl_elbc_chip_remove(priv);
mutex_lock(&fsl_elbc_nand_mutex);
elbc_fcm_ctrl->counter--;
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
-static void fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+static int fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
fsl_ifc_write_buf(mtd, buf, mtd->writesize);
fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
out_be32(&ifc->ifc_nand.ncfgr, 0x0);
/* set up nand options */
- chip->options = NAND_NO_READRDY;
chip->bbt_options = NAND_BBT_USE_FLASH;
#include <linux/pinctrl/consumer.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_mtd.h>
#include "gpmi-nand.h"
/* add our owner bbt descriptor */
return ret;
}
-static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
struct gpmi_nand_data *this = chip->priv;
&payload_virt, &payload_phys);
if (ret) {
pr_err("Inadequate payload DMA buffer\n");
- return;
+ return 0;
}
ret = send_page_prepare(this,
nfc_geo->payload_size,
payload_virt, payload_phys);
}
+
+ return 0;
}
/*
* ECC-based or raw view of the page is implicit in which function it calls
* (there is a similar pair of ECC-based/raw functions for writing).
*
+ * FIXME: The following paragraph is incorrect, now that there exist
+ * ecc.read_oob_raw and ecc.write_oob_raw functions.
+ *
* Since MTD assumes the OOB is not covered by ECC, there is no pair of
* ECC-based/raw functions for reading or or writing the OOB. The fact that the
* caller wants an ECC-based or raw view of the page is not propagated down to
/* Adjust the ECC strength according to the chip. */
this->nand.ecc.strength = this->bch_geometry.ecc_strength;
this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
+ this->mtd.bitflip_threshold = this->bch_geometry.ecc_strength;
/* NAND boot init, depends on the gpmi_set_geometry(). */
return nand_boot_init(this);
chip->ecc.size = 1;
chip->ecc.strength = 8;
chip->ecc.layout = &gpmi_hw_ecclayout;
+ if (of_get_nand_on_flash_bbt(this->dev->of_node))
+ chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
this->bch_geometry.payload_size = 1024;
--- /dev/null
+/*
+ * Driver for NAND MLC Controller in LPC32xx
+ *
+ * Author: Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright © 2011 WORK Microwave GmbH
+ * Copyright © 2011, 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * NAND Flash Controller Operation:
+ * - Read: Auto Decode
+ * - Write: Auto Encode
+ * - Tested Page Sizes: 2048, 4096
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_gpio.h>
+#include <linux/amba/pl08x.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mtd/nand_ecc.h>
+
+#define DRV_NAME "lpc32xx_mlc"
+
+/**********************************************************************
+* MLC NAND controller register offsets
+**********************************************************************/
+
+#define MLC_BUFF(x) (x + 0x00000)
+#define MLC_DATA(x) (x + 0x08000)
+#define MLC_CMD(x) (x + 0x10000)
+#define MLC_ADDR(x) (x + 0x10004)
+#define MLC_ECC_ENC_REG(x) (x + 0x10008)
+#define MLC_ECC_DEC_REG(x) (x + 0x1000C)
+#define MLC_ECC_AUTO_ENC_REG(x) (x + 0x10010)
+#define MLC_ECC_AUTO_DEC_REG(x) (x + 0x10014)
+#define MLC_RPR(x) (x + 0x10018)
+#define MLC_WPR(x) (x + 0x1001C)
+#define MLC_RUBP(x) (x + 0x10020)
+#define MLC_ROBP(x) (x + 0x10024)
+#define MLC_SW_WP_ADD_LOW(x) (x + 0x10028)
+#define MLC_SW_WP_ADD_HIG(x) (x + 0x1002C)
+#define MLC_ICR(x) (x + 0x10030)
+#define MLC_TIME_REG(x) (x + 0x10034)
+#define MLC_IRQ_MR(x) (x + 0x10038)
+#define MLC_IRQ_SR(x) (x + 0x1003C)
+#define MLC_LOCK_PR(x) (x + 0x10044)
+#define MLC_ISR(x) (x + 0x10048)
+#define MLC_CEH(x) (x + 0x1004C)
+
+/**********************************************************************
+* MLC_CMD bit definitions
+**********************************************************************/
+#define MLCCMD_RESET 0xFF
+
+/**********************************************************************
+* MLC_ICR bit definitions
+**********************************************************************/
+#define MLCICR_WPROT (1 << 3)
+#define MLCICR_LARGEBLOCK (1 << 2)
+#define MLCICR_LONGADDR (1 << 1)
+#define MLCICR_16BIT (1 << 0) /* unsupported by LPC32x0! */
+
+/**********************************************************************
+* MLC_TIME_REG bit definitions
+**********************************************************************/
+#define MLCTIMEREG_TCEA_DELAY(n) (((n) & 0x03) << 24)
+#define MLCTIMEREG_BUSY_DELAY(n) (((n) & 0x1F) << 19)
+#define MLCTIMEREG_NAND_TA(n) (((n) & 0x07) << 16)
+#define MLCTIMEREG_RD_HIGH(n) (((n) & 0x0F) << 12)
+#define MLCTIMEREG_RD_LOW(n) (((n) & 0x0F) << 8)
+#define MLCTIMEREG_WR_HIGH(n) (((n) & 0x0F) << 4)
+#define MLCTIMEREG_WR_LOW(n) (((n) & 0x0F) << 0)
+
+/**********************************************************************
+* MLC_IRQ_MR and MLC_IRQ_SR bit definitions
+**********************************************************************/
+#define MLCIRQ_NAND_READY (1 << 5)
+#define MLCIRQ_CONTROLLER_READY (1 << 4)
+#define MLCIRQ_DECODE_FAILURE (1 << 3)
+#define MLCIRQ_DECODE_ERROR (1 << 2)
+#define MLCIRQ_ECC_READY (1 << 1)
+#define MLCIRQ_WRPROT_FAULT (1 << 0)
+
+/**********************************************************************
+* MLC_LOCK_PR bit definitions
+**********************************************************************/
+#define MLCLOCKPR_MAGIC 0xA25E
+
+/**********************************************************************
+* MLC_ISR bit definitions
+**********************************************************************/
+#define MLCISR_DECODER_FAILURE (1 << 6)
+#define MLCISR_ERRORS ((1 << 4) | (1 << 5))
+#define MLCISR_ERRORS_DETECTED (1 << 3)
+#define MLCISR_ECC_READY (1 << 2)
+#define MLCISR_CONTROLLER_READY (1 << 1)
+#define MLCISR_NAND_READY (1 << 0)
+
+/**********************************************************************
+* MLC_CEH bit definitions
+**********************************************************************/
+#define MLCCEH_NORMAL (1 << 0)
+
+struct lpc32xx_nand_cfg_mlc {
+ uint32_t tcea_delay;
+ uint32_t busy_delay;
+ uint32_t nand_ta;
+ uint32_t rd_high;
+ uint32_t rd_low;
+ uint32_t wr_high;
+ uint32_t wr_low;
+ int wp_gpio;
+ struct mtd_partition *parts;
+ unsigned num_parts;
+};
+
+static struct nand_ecclayout lpc32xx_nand_oob = {
+ .eccbytes = 40,
+ .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
+ .oobfree = {
+ { .offset = 0,
+ .length = 6, },
+ { .offset = 16,
+ .length = 6, },
+ { .offset = 32,
+ .length = 6, },
+ { .offset = 48,
+ .length = 6, },
+ },
+};
+
+static struct nand_bbt_descr lpc32xx_nand_bbt = {
+ .options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB |
+ NAND_BBT_WRITE,
+ .pages = { 524224, 0, 0, 0, 0, 0, 0, 0 },
+};
+
+static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = {
+ .options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB |
+ NAND_BBT_WRITE,
+ .pages = { 524160, 0, 0, 0, 0, 0, 0, 0 },
+};
+
+struct lpc32xx_nand_host {
+ struct nand_chip nand_chip;
+ struct clk *clk;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ int irq;
+ struct lpc32xx_nand_cfg_mlc *ncfg;
+ struct completion comp_nand;
+ struct completion comp_controller;
+ uint32_t llptr;
+ /*
+ * Physical addresses of ECC buffer, DMA data buffers, OOB data buffer
+ */
+ dma_addr_t oob_buf_phy;
+ /*
+ * Virtual addresses of ECC buffer, DMA data buffers, OOB data buffer
+ */
+ uint8_t *oob_buf;
+ /* Physical address of DMA base address */
+ dma_addr_t io_base_phy;
+
+ struct completion comp_dma;
+ struct dma_chan *dma_chan;
+ struct dma_slave_config dma_slave_config;
+ struct scatterlist sgl;
+ uint8_t *dma_buf;
+ uint8_t *dummy_buf;
+ int mlcsubpages; /* number of 512bytes-subpages */
+};
+
+/*
+ * Activate/Deactivate DMA Operation:
+ *
+ * Using the PL080 DMA Controller for transferring the 512 byte subpages
+ * instead of doing readl() / writel() in a loop slows it down significantly.
+ * Measurements via getnstimeofday() upon 512 byte subpage reads reveal:
+ *
+ * - readl() of 128 x 32 bits in a loop: ~20us
+ * - DMA read of 512 bytes (32 bit, 4...128 words bursts): ~60us
+ * - DMA read of 512 bytes (32 bit, no bursts): ~100us
+ *
+ * This applies to the transfer itself. In the DMA case: only the
+ * wait_for_completion() (DMA setup _not_ included).
+ *
+ * Note that the 512 bytes subpage transfer is done directly from/to a
+ * FIFO/buffer inside the NAND controller. Most of the time (~400-800us for a
+ * 2048 bytes page) is spent waiting for the NAND IRQ, anyway. (The NAND
+ * controller transferring data between its internal buffer to/from the NAND
+ * chip.)
+ *
+ * Therefore, using the PL080 DMA is disabled by default, for now.
+ *
+ */
+static int use_dma;
+
+static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
+{
+ uint32_t clkrate, tmp;
+
+ /* Reset MLC controller */
+ writel(MLCCMD_RESET, MLC_CMD(host->io_base));
+ udelay(1000);
+
+ /* Get base clock for MLC block */
+ clkrate = clk_get_rate(host->clk);
+ if (clkrate == 0)
+ clkrate = 104000000;
+
+ /* Unlock MLC_ICR
+ * (among others, will be locked again automatically) */
+ writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base));
+
+ /* Configure MLC Controller: Large Block, 5 Byte Address */
+ tmp = MLCICR_LARGEBLOCK | MLCICR_LONGADDR;
+ writel(tmp, MLC_ICR(host->io_base));
+
+ /* Unlock MLC_TIME_REG
+ * (among others, will be locked again automatically) */
+ writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base));
+
+ /* Compute clock setup values, see LPC and NAND manual */
+ tmp = 0;
+ tmp |= MLCTIMEREG_TCEA_DELAY(clkrate / host->ncfg->tcea_delay + 1);
+ tmp |= MLCTIMEREG_BUSY_DELAY(clkrate / host->ncfg->busy_delay + 1);
+ tmp |= MLCTIMEREG_NAND_TA(clkrate / host->ncfg->nand_ta + 1);
+ tmp |= MLCTIMEREG_RD_HIGH(clkrate / host->ncfg->rd_high + 1);
+ tmp |= MLCTIMEREG_RD_LOW(clkrate / host->ncfg->rd_low);
+ tmp |= MLCTIMEREG_WR_HIGH(clkrate / host->ncfg->wr_high + 1);
+ tmp |= MLCTIMEREG_WR_LOW(clkrate / host->ncfg->wr_low);
+ writel(tmp, MLC_TIME_REG(host->io_base));
+
+ /* Enable IRQ for CONTROLLER_READY and NAND_READY */
+ writeb(MLCIRQ_CONTROLLER_READY | MLCIRQ_NAND_READY,
+ MLC_IRQ_MR(host->io_base));
+
+ /* Normal nCE operation: nCE controlled by controller */
+ writel(MLCCEH_NORMAL, MLC_CEH(host->io_base));
+}
+
+/*
+ * Hardware specific access to control lines
+ */
+static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct lpc32xx_nand_host *host = nand_chip->priv;
+
+ if (cmd != NAND_CMD_NONE) {
+ if (ctrl & NAND_CLE)
+ writel(cmd, MLC_CMD(host->io_base));
+ else
+ writel(cmd, MLC_ADDR(host->io_base));
+ }
+}
+
+/*
+ * Read Device Ready (NAND device _and_ controller ready)
+ */
+static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct lpc32xx_nand_host *host = nand_chip->priv;
+
+ if ((readb(MLC_ISR(host->io_base)) &
+ (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY)) ==
+ (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY))
+ return 1;
+
+ return 0;
+}
+
+static irqreturn_t lpc3xxx_nand_irq(int irq, struct lpc32xx_nand_host *host)
+{
+ uint8_t sr;
+
+ /* Clear interrupt flag by reading status */
+ sr = readb(MLC_IRQ_SR(host->io_base));
+ if (sr & MLCIRQ_NAND_READY)
+ complete(&host->comp_nand);
+ if (sr & MLCIRQ_CONTROLLER_READY)
+ complete(&host->comp_controller);
+
+ return IRQ_HANDLED;
+}
+
+static int lpc32xx_waitfunc_nand(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ if (readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY)
+ goto exit;
+
+ wait_for_completion(&host->comp_nand);
+
+ while (!(readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY)) {
+ /* Seems to be delayed sometimes by controller */
+ dev_dbg(&mtd->dev, "Warning: NAND not ready.\n");
+ cpu_relax();
+ }
+
+exit:
+ return NAND_STATUS_READY;
+}
+
+static int lpc32xx_waitfunc_controller(struct mtd_info *mtd,
+ struct nand_chip *chip)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ if (readb(MLC_ISR(host->io_base)) & MLCISR_CONTROLLER_READY)
+ goto exit;
+
+ wait_for_completion(&host->comp_controller);
+
+ while (!(readb(MLC_ISR(host->io_base)) &
+ MLCISR_CONTROLLER_READY)) {
+ dev_dbg(&mtd->dev, "Warning: Controller not ready.\n");
+ cpu_relax();
+ }
+
+exit:
+ return NAND_STATUS_READY;
+}
+
+static int lpc32xx_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ lpc32xx_waitfunc_nand(mtd, chip);
+ lpc32xx_waitfunc_controller(mtd, chip);
+
+ return NAND_STATUS_READY;
+}
+
+/*
+ * Enable NAND write protect
+ */
+static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 0);
+}
+
+/*
+ * Disable NAND write protect
+ */
+static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 1);
+}
+
+static void lpc32xx_dma_complete_func(void *completion)
+{
+ complete(completion);
+}
+
+static int lpc32xx_xmit_dma(struct mtd_info *mtd, void *mem, int len,
+ enum dma_transfer_direction dir)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ struct dma_async_tx_descriptor *desc;
+ int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ int res;
+
+ sg_init_one(&host->sgl, mem, len);
+
+ res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ if (res != 1) {
+ dev_err(mtd->dev.parent, "Failed to map sg list\n");
+ return -ENXIO;
+ }
+ desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
+ flags);
+ if (!desc) {
+ dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
+ goto out1;
+ }
+
+ init_completion(&host->comp_dma);
+ desc->callback = lpc32xx_dma_complete_func;
+ desc->callback_param = &host->comp_dma;
+
+ dmaengine_submit(desc);
+ dma_async_issue_pending(host->dma_chan);
+
+ wait_for_completion_timeout(&host->comp_dma, msecs_to_jiffies(1000));
+
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ return 0;
+out1:
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ return -ENXIO;
+}
+
+static int lpc32xx_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ int i, j;
+ uint8_t *oobbuf = chip->oob_poi;
+ uint32_t mlc_isr;
+ int res;
+ uint8_t *dma_buf;
+ bool dma_mapped;
+
+ if ((void *)buf <= high_memory) {
+ dma_buf = buf;
+ dma_mapped = true;
+ } else {
+ dma_buf = host->dma_buf;
+ dma_mapped = false;
+ }
+
+ /* Writing Command and Address */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ /* For all sub-pages */
+ for (i = 0; i < host->mlcsubpages; i++) {
+ /* Start Auto Decode Command */
+ writeb(0x00, MLC_ECC_AUTO_DEC_REG(host->io_base));
+
+ /* Wait for Controller Ready */
+ lpc32xx_waitfunc_controller(mtd, chip);
+
+ /* Check ECC Error status */
+ mlc_isr = readl(MLC_ISR(host->io_base));
+ if (mlc_isr & MLCISR_DECODER_FAILURE) {
+ mtd->ecc_stats.failed++;
+ dev_warn(&mtd->dev, "%s: DECODER_FAILURE\n", __func__);
+ } else if (mlc_isr & MLCISR_ERRORS_DETECTED) {
+ mtd->ecc_stats.corrected += ((mlc_isr >> 4) & 0x3) + 1;
+ }
+
+ /* Read 512 + 16 Bytes */
+ if (use_dma) {
+ res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512,
+ DMA_DEV_TO_MEM);
+ if (res)
+ return res;
+ } else {
+ for (j = 0; j < (512 >> 2); j++) {
+ *((uint32_t *)(buf)) =
+ readl(MLC_BUFF(host->io_base));
+ buf += 4;
+ }
+ }
+ for (j = 0; j < (16 >> 2); j++) {
+ *((uint32_t *)(oobbuf)) =
+ readl(MLC_BUFF(host->io_base));
+ oobbuf += 4;
+ }
+ }
+
+ if (use_dma && !dma_mapped)
+ memcpy(buf, dma_buf, mtd->writesize);
+
+ return 0;
+}
+
+static int lpc32xx_write_page_lowlevel(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ const uint8_t *oobbuf = chip->oob_poi;
+ uint8_t *dma_buf = (uint8_t *)buf;
+ int res;
+ int i, j;
+
+ if (use_dma && (void *)buf >= high_memory) {
+ dma_buf = host->dma_buf;
+ memcpy(dma_buf, buf, mtd->writesize);
+ }
+
+ for (i = 0; i < host->mlcsubpages; i++) {
+ /* Start Encode */
+ writeb(0x00, MLC_ECC_ENC_REG(host->io_base));
+
+ /* Write 512 + 6 Bytes to Buffer */
+ if (use_dma) {
+ res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512,
+ DMA_MEM_TO_DEV);
+ if (res)
+ return res;
+ } else {
+ for (j = 0; j < (512 >> 2); j++) {
+ writel(*((uint32_t *)(buf)),
+ MLC_BUFF(host->io_base));
+ buf += 4;
+ }
+ }
+ writel(*((uint32_t *)(oobbuf)), MLC_BUFF(host->io_base));
+ oobbuf += 4;
+ writew(*((uint16_t *)(oobbuf)), MLC_BUFF(host->io_base));
+ oobbuf += 12;
+
+ /* Auto Encode w/ Bit 8 = 0 (see LPC MLC Controller manual) */
+ writeb(0x00, MLC_ECC_AUTO_ENC_REG(host->io_base));
+
+ /* Wait for Controller Ready */
+ lpc32xx_waitfunc_controller(mtd, chip);
+ }
+ return 0;
+}
+
+static int lpc32xx_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page,
+ int cached, int raw)
+{
+ int res;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ res = lpc32xx_write_page_lowlevel(mtd, chip, buf, oob_required);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ lpc32xx_waitfunc(mtd, chip);
+
+ return res;
+}
+
+static int lpc32xx_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Read whole page - necessary with MLC controller! */
+ lpc32xx_read_page(mtd, chip, host->dummy_buf, 1, page);
+
+ return 0;
+}
+
+static int lpc32xx_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ /* None, write_oob conflicts with the automatic LPC MLC ECC decoder! */
+ return 0;
+}
+
+/* Prepares MLC for transfers with H/W ECC enabled: always enabled anyway */
+static void lpc32xx_ecc_enable(struct mtd_info *mtd, int mode)
+{
+ /* Always enabled! */
+}
+
+static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ host->dma_chan = dma_request_channel(mask, pl08x_filter_id, "nand-mlc");
+ if (!host->dma_chan) {
+ dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
+ return -EBUSY;
+ }
+
+ /*
+ * Set direction to a sensible value even if the dmaengine driver
+ * should ignore it. With the default (DMA_MEM_TO_MEM), the amba-pl08x
+ * driver criticizes it as "alien transfer direction".
+ */
+ host->dma_slave_config.direction = DMA_DEV_TO_MEM;
+ host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.src_maxburst = 128;
+ host->dma_slave_config.dst_maxburst = 128;
+ /* DMA controller does flow control: */
+ host->dma_slave_config.device_fc = false;
+ host->dma_slave_config.src_addr = MLC_BUFF(host->io_base_phy);
+ host->dma_slave_config.dst_addr = MLC_BUFF(host->io_base_phy);
+ if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
+ dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
+ goto out1;
+ }
+
+ return 0;
+out1:
+ dma_release_channel(host->dma_chan);
+ return -ENXIO;
+}
+
+#ifdef CONFIG_OF
+static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
+{
+ struct lpc32xx_nand_cfg_mlc *pdata;
+ struct device_node *np = dev->of_node;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for platform data\n");
+ return NULL;
+ }
+
+ of_property_read_u32(np, "nxp,tcea-delay", &pdata->tcea_delay);
+ of_property_read_u32(np, "nxp,busy-delay", &pdata->busy_delay);
+ of_property_read_u32(np, "nxp,nand-ta", &pdata->nand_ta);
+ of_property_read_u32(np, "nxp,rd-high", &pdata->rd_high);
+ of_property_read_u32(np, "nxp,rd-low", &pdata->rd_low);
+ of_property_read_u32(np, "nxp,wr-high", &pdata->wr_high);
+ of_property_read_u32(np, "nxp,wr-low", &pdata->wr_low);
+
+ if (!pdata->tcea_delay || !pdata->busy_delay || !pdata->nand_ta ||
+ !pdata->rd_high || !pdata->rd_low || !pdata->wr_high ||
+ !pdata->wr_low) {
+ dev_err(dev, "chip parameters not specified correctly\n");
+ return NULL;
+ }
+
+ pdata->wp_gpio = of_get_named_gpio(np, "gpios", 0);
+
+ return pdata;
+}
+#else
+static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
+/*
+ * Probe for NAND controller
+ */
+static int __devinit lpc32xx_nand_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ struct resource *rc;
+ int res;
+ struct mtd_part_parser_data ppdata = {};
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ dev_err(&pdev->dev, "failed to allocate device structure.\n");
+ return -ENOMEM;
+ }
+
+ rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (rc == NULL) {
+ dev_err(&pdev->dev, "No memory resource found for device!\r\n");
+ return -ENXIO;
+ }
+
+ host->io_base = devm_request_and_ioremap(&pdev->dev, rc);
+ if (host->io_base == NULL) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ return -EIO;
+ }
+ host->io_base_phy = rc->start;
+
+ mtd = &host->mtd;
+ nand_chip = &host->nand_chip;
+ if (pdev->dev.of_node)
+ host->ncfg = lpc32xx_parse_dt(&pdev->dev);
+ else
+ host->ncfg = pdev->dev.platform_data;
+ if (!host->ncfg) {
+ dev_err(&pdev->dev, "Missing platform data\n");
+ return -ENOENT;
+ }
+ if (host->ncfg->wp_gpio == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (gpio_is_valid(host->ncfg->wp_gpio) &&
+ gpio_request(host->ncfg->wp_gpio, "NAND WP")) {
+ dev_err(&pdev->dev, "GPIO not available\n");
+ return -EBUSY;
+ }
+ lpc32xx_wp_disable(host);
+
+ nand_chip->priv = host; /* link the private data structures */
+ mtd->priv = nand_chip;
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = &pdev->dev;
+
+ /* Get NAND clock */
+ host->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "Clock initialization failure\n");
+ res = -ENOENT;
+ goto err_exit1;
+ }
+ clk_enable(host->clk);
+
+ nand_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
+ nand_chip->dev_ready = lpc32xx_nand_device_ready;
+ nand_chip->chip_delay = 25; /* us */
+ nand_chip->IO_ADDR_R = MLC_DATA(host->io_base);
+ nand_chip->IO_ADDR_W = MLC_DATA(host->io_base);
+
+ /* Init NAND controller */
+ lpc32xx_nand_setup(host);
+
+ platform_set_drvdata(pdev, host);
+
+ /* Initialize function pointers */
+ nand_chip->ecc.hwctl = lpc32xx_ecc_enable;
+ nand_chip->ecc.read_page_raw = lpc32xx_read_page;
+ nand_chip->ecc.read_page = lpc32xx_read_page;
+ nand_chip->ecc.write_page_raw = lpc32xx_write_page_lowlevel;
+ nand_chip->ecc.write_page = lpc32xx_write_page_lowlevel;
+ nand_chip->ecc.write_oob = lpc32xx_write_oob;
+ nand_chip->ecc.read_oob = lpc32xx_read_oob;
+ nand_chip->ecc.strength = 4;
+ nand_chip->write_page = lpc32xx_write_page;
+ nand_chip->waitfunc = lpc32xx_waitfunc;
+
+ nand_chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+ nand_chip->bbt_td = &lpc32xx_nand_bbt;
+ nand_chip->bbt_md = &lpc32xx_nand_bbt_mirror;
+
+ /* bitflip_threshold's default is defined as ecc_strength anyway.
+ * Unfortunately, it is set only later at add_mtd_device(). Meanwhile
+ * being 0, it causes bad block table scanning errors in
+ * nand_scan_tail(), so preparing it here. */
+ mtd->bitflip_threshold = nand_chip->ecc.strength;
+
+ if (use_dma) {
+ res = lpc32xx_dma_setup(host);
+ if (res) {
+ res = -EIO;
+ goto err_exit2;
+ }
+ }
+
+ /*
+ * Scan to find existance of the device and
+ * Get the type of NAND device SMALL block or LARGE block
+ */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
+ if (!host->dma_buf) {
+ dev_err(&pdev->dev, "Error allocating dma_buf memory\n");
+ res = -ENOMEM;
+ goto err_exit3;
+ }
+
+ host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
+ if (!host->dummy_buf) {
+ dev_err(&pdev->dev, "Error allocating dummy_buf memory\n");
+ res = -ENOMEM;
+ goto err_exit3;
+ }
+
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = mtd->writesize;
+ nand_chip->ecc.layout = &lpc32xx_nand_oob;
+ host->mlcsubpages = mtd->writesize / 512;
+
+ /* initially clear interrupt status */
+ readb(MLC_IRQ_SR(host->io_base));
+
+ init_completion(&host->comp_nand);
+ init_completion(&host->comp_controller);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if ((host->irq < 0) || (host->irq >= NR_IRQS)) {
+ dev_err(&pdev->dev, "failed to get platform irq\n");
+ res = -EINVAL;
+ goto err_exit3;
+ }
+
+ if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
+ IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
+ dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ /*
+ * Fills out all the uninitialized function pointers with the defaults
+ * And scans for a bad block table if appropriate.
+ */
+ if (nand_scan_tail(mtd)) {
+ res = -ENXIO;
+ goto err_exit4;
+ }
+
+ mtd->name = DRV_NAME;
+
+ ppdata.of_node = pdev->dev.of_node;
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
+ host->ncfg->num_parts);
+ if (!res)
+ return res;
+
+ nand_release(mtd);
+
+err_exit4:
+ free_irq(host->irq, host);
+err_exit3:
+ if (use_dma)
+ dma_release_channel(host->dma_chan);
+err_exit2:
+ clk_disable(host->clk);
+ clk_put(host->clk);
+ platform_set_drvdata(pdev, NULL);
+err_exit1:
+ lpc32xx_wp_enable(host);
+ gpio_free(host->ncfg->wp_gpio);
+
+ return res;
+}
+
+/*
+ * Remove NAND device
+ */
+static int __devexit lpc32xx_nand_remove(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+ free_irq(host->irq, host);
+ if (use_dma)
+ dma_release_channel(host->dma_chan);
+
+ clk_disable(host->clk);
+ clk_put(host->clk);
+ platform_set_drvdata(pdev, NULL);
+
+ lpc32xx_wp_enable(host);
+ gpio_free(host->ncfg->wp_gpio);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_nand_resume(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Re-enable NAND clock */
+ clk_enable(host->clk);
+
+ /* Fresh init of NAND controller */
+ lpc32xx_nand_setup(host);
+
+ /* Disable write protect */
+ lpc32xx_wp_disable(host);
+
+ return 0;
+}
+
+static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Enable write protect for safety */
+ lpc32xx_wp_enable(host);
+
+ /* Disable clock */
+ clk_disable(host->clk);
+ return 0;
+}
+
+#else
+#define lpc32xx_nand_resume NULL
+#define lpc32xx_nand_suspend NULL
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id lpc32xx_nand_match[] = {
+ { .compatible = "nxp,lpc3220-mlc" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
+#endif
+
+static struct platform_driver lpc32xx_nand_driver = {
+ .probe = lpc32xx_nand_probe,
+ .remove = __devexit_p(lpc32xx_nand_remove),
+ .resume = lpc32xx_nand_resume,
+ .suspend = lpc32xx_nand_suspend,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lpc32xx_nand_match),
+ },
+};
+
+module_platform_driver(lpc32xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX MLC controller");
--- /dev/null
+/*
+ * NXP LPC32XX NAND SLC driver
+ *
+ * Authors:
+ * Kevin Wells <kevin.wells@nxp.com>
+ * Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright © 2011 NXP Semiconductors
+ * Copyright © 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_gpio.h>
+#include <linux/amba/pl08x.h>
+
+#define LPC32XX_MODNAME "lpc32xx-nand"
+
+/**********************************************************************
+* SLC NAND controller register offsets
+**********************************************************************/
+
+#define SLC_DATA(x) (x + 0x000)
+#define SLC_ADDR(x) (x + 0x004)
+#define SLC_CMD(x) (x + 0x008)
+#define SLC_STOP(x) (x + 0x00C)
+#define SLC_CTRL(x) (x + 0x010)
+#define SLC_CFG(x) (x + 0x014)
+#define SLC_STAT(x) (x + 0x018)
+#define SLC_INT_STAT(x) (x + 0x01C)
+#define SLC_IEN(x) (x + 0x020)
+#define SLC_ISR(x) (x + 0x024)
+#define SLC_ICR(x) (x + 0x028)
+#define SLC_TAC(x) (x + 0x02C)
+#define SLC_TC(x) (x + 0x030)
+#define SLC_ECC(x) (x + 0x034)
+#define SLC_DMA_DATA(x) (x + 0x038)
+
+/**********************************************************************
+* slc_ctrl register definitions
+**********************************************************************/
+#define SLCCTRL_SW_RESET (1 << 2) /* Reset the NAND controller bit */
+#define SLCCTRL_ECC_CLEAR (1 << 1) /* Reset ECC bit */
+#define SLCCTRL_DMA_START (1 << 0) /* Start DMA channel bit */
+
+/**********************************************************************
+* slc_cfg register definitions
+**********************************************************************/
+#define SLCCFG_CE_LOW (1 << 5) /* Force CE low bit */
+#define SLCCFG_DMA_ECC (1 << 4) /* Enable DMA ECC bit */
+#define SLCCFG_ECC_EN (1 << 3) /* ECC enable bit */
+#define SLCCFG_DMA_BURST (1 << 2) /* DMA burst bit */
+#define SLCCFG_DMA_DIR (1 << 1) /* DMA write(0)/read(1) bit */
+#define SLCCFG_WIDTH (1 << 0) /* External device width, 0=8bit */
+
+/**********************************************************************
+* slc_stat register definitions
+**********************************************************************/
+#define SLCSTAT_DMA_FIFO (1 << 2) /* DMA FIFO has data bit */
+#define SLCSTAT_SLC_FIFO (1 << 1) /* SLC FIFO has data bit */
+#define SLCSTAT_NAND_READY (1 << 0) /* NAND device is ready bit */
+
+/**********************************************************************
+* slc_int_stat, slc_ien, slc_isr, and slc_icr register definitions
+**********************************************************************/
+#define SLCSTAT_INT_TC (1 << 1) /* Transfer count bit */
+#define SLCSTAT_INT_RDY_EN (1 << 0) /* Ready interrupt bit */
+
+/**********************************************************************
+* slc_tac register definitions
+**********************************************************************/
+/* Clock setting for RDY write sample wait time in 2*n clocks */
+#define SLCTAC_WDR(n) (((n) & 0xF) << 28)
+/* Write pulse width in clock cycles, 1 to 16 clocks */
+#define SLCTAC_WWIDTH(n) (((n) & 0xF) << 24)
+/* Write hold time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_WHOLD(n) (((n) & 0xF) << 20)
+/* Write setup time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_WSETUP(n) (((n) & 0xF) << 16)
+/* Clock setting for RDY read sample wait time in 2*n clocks */
+#define SLCTAC_RDR(n) (((n) & 0xF) << 12)
+/* Read pulse width in clock cycles, 1 to 16 clocks */
+#define SLCTAC_RWIDTH(n) (((n) & 0xF) << 8)
+/* Read hold time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_RHOLD(n) (((n) & 0xF) << 4)
+/* Read setup time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_RSETUP(n) (((n) & 0xF) << 0)
+
+/**********************************************************************
+* slc_ecc register definitions
+**********************************************************************/
+/* ECC line party fetch macro */
+#define SLCECC_TO_LINEPAR(n) (((n) >> 6) & 0x7FFF)
+#define SLCECC_TO_COLPAR(n) ((n) & 0x3F)
+
+/*
+ * DMA requires storage space for the DMA local buffer and the hardware ECC
+ * storage area. The DMA local buffer is only used if DMA mapping fails
+ * during runtime.
+ */
+#define LPC32XX_DMA_DATA_SIZE 4096
+#define LPC32XX_ECC_SAVE_SIZE ((4096 / 256) * 4)
+
+/* Number of bytes used for ECC stored in NAND per 256 bytes */
+#define LPC32XX_SLC_DEV_ECC_BYTES 3
+
+/*
+ * If the NAND base clock frequency can't be fetched, this frequency will be
+ * used instead as the base. This rate is used to setup the timing registers
+ * used for NAND accesses.
+ */
+#define LPC32XX_DEF_BUS_RATE 133250000
+
+/* Milliseconds for DMA FIFO timeout (unlikely anyway) */
+#define LPC32XX_DMA_TIMEOUT 100
+
+/*
+ * NAND ECC Layout for small page NAND devices
+ * Note: For large and huge page devices, the default layouts are used
+ */
+static struct nand_ecclayout lpc32xx_nand_oob_16 = {
+ .eccbytes = 6,
+ .eccpos = {10, 11, 12, 13, 14, 15},
+ .oobfree = {
+ { .offset = 0, .length = 4 },
+ { .offset = 6, .length = 4 },
+ },
+};
+
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+/*
+ * Small page FLASH BBT descriptors, marker at offset 0, version at offset 6
+ * Note: Large page devices used the default layout
+ */
+static struct nand_bbt_descr bbt_smallpage_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_smallpage_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = mirror_pattern
+};
+
+/*
+ * NAND platform configuration structure
+ */
+struct lpc32xx_nand_cfg_slc {
+ uint32_t wdr_clks;
+ uint32_t wwidth;
+ uint32_t whold;
+ uint32_t wsetup;
+ uint32_t rdr_clks;
+ uint32_t rwidth;
+ uint32_t rhold;
+ uint32_t rsetup;
+ bool use_bbt;
+ int wp_gpio;
+ struct mtd_partition *parts;
+ unsigned num_parts;
+};
+
+struct lpc32xx_nand_host {
+ struct nand_chip nand_chip;
+ struct clk *clk;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ struct lpc32xx_nand_cfg_slc *ncfg;
+
+ struct completion comp;
+ struct dma_chan *dma_chan;
+ uint32_t dma_buf_len;
+ struct dma_slave_config dma_slave_config;
+ struct scatterlist sgl;
+
+ /*
+ * DMA and CPU addresses of ECC work area and data buffer
+ */
+ uint32_t *ecc_buf;
+ uint8_t *data_buf;
+ dma_addr_t io_base_dma;
+};
+
+static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
+{
+ uint32_t clkrate, tmp;
+
+ /* Reset SLC controller */
+ writel(SLCCTRL_SW_RESET, SLC_CTRL(host->io_base));
+ udelay(1000);
+
+ /* Basic setup */
+ writel(0, SLC_CFG(host->io_base));
+ writel(0, SLC_IEN(host->io_base));
+ writel((SLCSTAT_INT_TC | SLCSTAT_INT_RDY_EN),
+ SLC_ICR(host->io_base));
+
+ /* Get base clock for SLC block */
+ clkrate = clk_get_rate(host->clk);
+ if (clkrate == 0)
+ clkrate = LPC32XX_DEF_BUS_RATE;
+
+ /* Compute clock setup values */
+ tmp = SLCTAC_WDR(host->ncfg->wdr_clks) |
+ SLCTAC_WWIDTH(1 + (clkrate / host->ncfg->wwidth)) |
+ SLCTAC_WHOLD(1 + (clkrate / host->ncfg->whold)) |
+ SLCTAC_WSETUP(1 + (clkrate / host->ncfg->wsetup)) |
+ SLCTAC_RDR(host->ncfg->rdr_clks) |
+ SLCTAC_RWIDTH(1 + (clkrate / host->ncfg->rwidth)) |
+ SLCTAC_RHOLD(1 + (clkrate / host->ncfg->rhold)) |
+ SLCTAC_RSETUP(1 + (clkrate / host->ncfg->rsetup));
+ writel(tmp, SLC_TAC(host->io_base));
+}
+
+/*
+ * Hardware specific access to control lines
+ */
+static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ uint32_t tmp;
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Does CE state need to be changed? */
+ tmp = readl(SLC_CFG(host->io_base));
+ if (ctrl & NAND_NCE)
+ tmp |= SLCCFG_CE_LOW;
+ else
+ tmp &= ~SLCCFG_CE_LOW;
+ writel(tmp, SLC_CFG(host->io_base));
+
+ if (cmd != NAND_CMD_NONE) {
+ if (ctrl & NAND_CLE)
+ writel(cmd, SLC_CMD(host->io_base));
+ else
+ writel(cmd, SLC_ADDR(host->io_base));
+ }
+}
+
+/*
+ * Read the Device Ready pin
+ */
+static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ int rdy = 0;
+
+ if ((readl(SLC_STAT(host->io_base)) & SLCSTAT_NAND_READY) != 0)
+ rdy = 1;
+
+ return rdy;
+}
+
+/*
+ * Enable NAND write protect
+ */
+static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 0);
+}
+
+/*
+ * Disable NAND write protect
+ */
+static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 1);
+}
+
+/*
+ * Prepares SLC for transfers with H/W ECC enabled
+ */
+static void lpc32xx_nand_ecc_enable(struct mtd_info *mtd, int mode)
+{
+ /* Hardware ECC is enabled automatically in hardware as needed */
+}
+
+/*
+ * Calculates the ECC for the data
+ */
+static int lpc32xx_nand_ecc_calculate(struct mtd_info *mtd,
+ const unsigned char *buf,
+ unsigned char *code)
+{
+ /*
+ * ECC is calculated automatically in hardware during syndrome read
+ * and write operations, so it doesn't need to be calculated here.
+ */
+ return 0;
+}
+
+/*
+ * Read a single byte from NAND device
+ */
+static uint8_t lpc32xx_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ return (uint8_t)readl(SLC_DATA(host->io_base));
+}
+
+/*
+ * Simple device read without ECC
+ */
+static void lpc32xx_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Direct device read with no ECC */
+ while (len-- > 0)
+ *buf++ = (uint8_t)readl(SLC_DATA(host->io_base));
+}
+
+/*
+ * Simple device write without ECC
+ */
+static void lpc32xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Direct device write with no ECC */
+ while (len-- > 0)
+ writel((uint32_t)*buf++, SLC_DATA(host->io_base));
+}
+
+/*
+ * Verify data in buffer to data on device
+ */
+static int lpc32xx_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ int i;
+
+ /* DATA register must be read as 32 bits or it will fail */
+ for (i = 0; i < len; i++) {
+ if (buf[i] != (uint8_t)readl(SLC_DATA(host->io_base)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/*
+ * Read the OOB data from the device without ECC using FIFO method
+ */
+static int lpc32xx_nand_read_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/*
+ * Write the OOB data to the device without ECC using FIFO method
+ */
+static int lpc32xx_nand_write_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Send command to program the OOB data */
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/*
+ * Fills in the ECC fields in the OOB buffer with the hardware generated ECC
+ */
+static void lpc32xx_slc_ecc_copy(uint8_t *spare, const uint32_t *ecc, int count)
+{
+ int i;
+
+ for (i = 0; i < (count * 3); i += 3) {
+ uint32_t ce = ecc[i / 3];
+ ce = ~(ce << 2) & 0xFFFFFF;
+ spare[i + 2] = (uint8_t)(ce & 0xFF);
+ ce >>= 8;
+ spare[i + 1] = (uint8_t)(ce & 0xFF);
+ ce >>= 8;
+ spare[i] = (uint8_t)(ce & 0xFF);
+ }
+}
+
+static void lpc32xx_dma_complete_func(void *completion)
+{
+ complete(completion);
+}
+
+static int lpc32xx_xmit_dma(struct mtd_info *mtd, dma_addr_t dma,
+ void *mem, int len, enum dma_transfer_direction dir)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ struct dma_async_tx_descriptor *desc;
+ int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ int res;
+
+ host->dma_slave_config.direction = dir;
+ host->dma_slave_config.src_addr = dma;
+ host->dma_slave_config.dst_addr = dma;
+ host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.src_maxburst = 4;
+ host->dma_slave_config.dst_maxburst = 4;
+ /* DMA controller does flow control: */
+ host->dma_slave_config.device_fc = false;
+ if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
+ dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
+ return -ENXIO;
+ }
+
+ sg_init_one(&host->sgl, mem, len);
+
+ res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ if (res != 1) {
+ dev_err(mtd->dev.parent, "Failed to map sg list\n");
+ return -ENXIO;
+ }
+ desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
+ flags);
+ if (!desc) {
+ dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
+ goto out1;
+ }
+
+ init_completion(&host->comp);
+ desc->callback = lpc32xx_dma_complete_func;
+ desc->callback_param = &host->comp;
+
+ dmaengine_submit(desc);
+ dma_async_issue_pending(host->dma_chan);
+
+ wait_for_completion_timeout(&host->comp, msecs_to_jiffies(1000));
+
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+
+ return 0;
+out1:
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ return -ENXIO;
+}
+
+/*
+ * DMA read/write transfers with ECC support
+ */
+static int lpc32xx_xfer(struct mtd_info *mtd, uint8_t *buf, int eccsubpages,
+ int read)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ int i, status = 0;
+ unsigned long timeout;
+ int res;
+ enum dma_transfer_direction dir =
+ read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+ uint8_t *dma_buf;
+ bool dma_mapped;
+
+ if ((void *)buf <= high_memory) {
+ dma_buf = buf;
+ dma_mapped = true;
+ } else {
+ dma_buf = host->data_buf;
+ dma_mapped = false;
+ if (!read)
+ memcpy(host->data_buf, buf, mtd->writesize);
+ }
+
+ if (read) {
+ writel(readl(SLC_CFG(host->io_base)) |
+ SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
+ SLCCFG_DMA_BURST, SLC_CFG(host->io_base));
+ } else {
+ writel((readl(SLC_CFG(host->io_base)) |
+ SLCCFG_ECC_EN | SLCCFG_DMA_ECC | SLCCFG_DMA_BURST) &
+ ~SLCCFG_DMA_DIR,
+ SLC_CFG(host->io_base));
+ }
+
+ /* Clear initial ECC */
+ writel(SLCCTRL_ECC_CLEAR, SLC_CTRL(host->io_base));
+
+ /* Transfer size is data area only */
+ writel(mtd->writesize, SLC_TC(host->io_base));
+
+ /* Start transfer in the NAND controller */
+ writel(readl(SLC_CTRL(host->io_base)) | SLCCTRL_DMA_START,
+ SLC_CTRL(host->io_base));
+
+ for (i = 0; i < chip->ecc.steps; i++) {
+ /* Data */
+ res = lpc32xx_xmit_dma(mtd, SLC_DMA_DATA(host->io_base_dma),
+ dma_buf + i * chip->ecc.size,
+ mtd->writesize / chip->ecc.steps, dir);
+ if (res)
+ return res;
+
+ /* Always _read_ ECC */
+ if (i == chip->ecc.steps - 1)
+ break;
+ if (!read) /* ECC availability delayed on write */
+ udelay(10);
+ res = lpc32xx_xmit_dma(mtd, SLC_ECC(host->io_base_dma),
+ &host->ecc_buf[i], 4, DMA_DEV_TO_MEM);
+ if (res)
+ return res;
+ }
+
+ /*
+ * According to NXP, the DMA can be finished here, but the NAND
+ * controller may still have buffered data. After porting to using the
+ * dmaengine DMA driver (amba-pl080), the condition (DMA_FIFO empty)
+ * appears to be always true, according to tests. Keeping the check for
+ * safety reasons for now.
+ */
+ if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) {
+ dev_warn(mtd->dev.parent, "FIFO not empty!\n");
+ timeout = jiffies + msecs_to_jiffies(LPC32XX_DMA_TIMEOUT);
+ while ((readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) &&
+ time_before(jiffies, timeout))
+ cpu_relax();
+ if (!time_before(jiffies, timeout)) {
+ dev_err(mtd->dev.parent, "FIFO held data too long\n");
+ status = -EIO;
+ }
+ }
+
+ /* Read last calculated ECC value */
+ if (!read)
+ udelay(10);
+ host->ecc_buf[chip->ecc.steps - 1] =
+ readl(SLC_ECC(host->io_base));
+
+ /* Flush DMA */
+ dmaengine_terminate_all(host->dma_chan);
+
+ if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO ||
+ readl(SLC_TC(host->io_base))) {
+ /* Something is left in the FIFO, something is wrong */
+ dev_err(mtd->dev.parent, "DMA FIFO failure\n");
+ status = -EIO;
+ }
+
+ /* Stop DMA & HW ECC */
+ writel(readl(SLC_CTRL(host->io_base)) & ~SLCCTRL_DMA_START,
+ SLC_CTRL(host->io_base));
+ writel(readl(SLC_CFG(host->io_base)) &
+ ~(SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
+ SLCCFG_DMA_BURST), SLC_CFG(host->io_base));
+
+ if (!dma_mapped && read)
+ memcpy(buf, host->data_buf, mtd->writesize);
+
+ return status;
+}
+
+/*
+ * Read the data and OOB data from the device, use ECC correction with the
+ * data, disable ECC for the OOB data
+ */
+static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ int stat, i, status;
+ uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE];
+
+ /* Issue read command */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ /* Read data and oob, calculate ECC */
+ status = lpc32xx_xfer(mtd, buf, chip->ecc.steps, 1);
+
+ /* Get OOB data */
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Convert to stored ECC format */
+ lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps);
+
+ /* Pointer to ECC data retrieved from NAND spare area */
+ oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0];
+
+ for (i = 0; i < chip->ecc.steps; i++) {
+ stat = chip->ecc.correct(mtd, buf, oobecc,
+ &tmpecc[i * chip->ecc.bytes]);
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+
+ buf += chip->ecc.size;
+ oobecc += chip->ecc.bytes;
+ }
+
+ return status;
+}
+
+/*
+ * Read the data and OOB data from the device, no ECC correction with the
+ * data or OOB data
+ */
+static int lpc32xx_nand_read_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ /* Issue read command */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ /* Raw reads can just use the FIFO interface */
+ chip->read_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/*
+ * Write the data and OOB data to the device, use ECC with the data,
+ * disable ECC for the OOB data
+ */
+static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
+ int error;
+
+ /* Write data, calculate ECC on outbound data */
+ error = lpc32xx_xfer(mtd, (uint8_t *)buf, chip->ecc.steps, 0);
+ if (error)
+ return error;
+
+ /*
+ * The calculated ECC needs some manual work done to it before
+ * committing it to NAND. Process the calculated ECC and place
+ * the resultant values directly into the OOB buffer. */
+ lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps);
+
+ /* Write ECC data to device */
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+/*
+ * Write the data and OOB data to the device, no ECC correction with the
+ * data or OOB data
+ */
+static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required)
+{
+ /* Raw writes can just use the FIFO interface */
+ chip->write_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ host->dma_chan = dma_request_channel(mask, pl08x_filter_id, "nand-slc");
+ if (!host->dma_chan) {
+ dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
+{
+ struct lpc32xx_nand_cfg_slc *pdata;
+ struct device_node *np = dev->of_node;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for platform data\n");
+ return NULL;
+ }
+
+ of_property_read_u32(np, "nxp,wdr-clks", &pdata->wdr_clks);
+ of_property_read_u32(np, "nxp,wwidth", &pdata->wwidth);
+ of_property_read_u32(np, "nxp,whold", &pdata->whold);
+ of_property_read_u32(np, "nxp,wsetup", &pdata->wsetup);
+ of_property_read_u32(np, "nxp,rdr-clks", &pdata->rdr_clks);
+ of_property_read_u32(np, "nxp,rwidth", &pdata->rwidth);
+ of_property_read_u32(np, "nxp,rhold", &pdata->rhold);
+ of_property_read_u32(np, "nxp,rsetup", &pdata->rsetup);
+
+ if (!pdata->wdr_clks || !pdata->wwidth || !pdata->whold ||
+ !pdata->wsetup || !pdata->rdr_clks || !pdata->rwidth ||
+ !pdata->rhold || !pdata->rsetup) {
+ dev_err(dev, "chip parameters not specified correctly\n");
+ return NULL;
+ }
+
+ pdata->use_bbt = of_get_nand_on_flash_bbt(np);
+ pdata->wp_gpio = of_get_named_gpio(np, "gpios", 0);
+
+ return pdata;
+}
+#else
+static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
+/*
+ * Probe for NAND controller
+ */
+static int __devinit lpc32xx_nand_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *chip;
+ struct resource *rc;
+ struct mtd_part_parser_data ppdata = {};
+ int res;
+
+ rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (rc == NULL) {
+ dev_err(&pdev->dev, "No memory resource found for device\n");
+ return -EBUSY;
+ }
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ dev_err(&pdev->dev, "failed to allocate device structure\n");
+ return -ENOMEM;
+ }
+ host->io_base_dma = rc->start;
+
+ host->io_base = devm_request_and_ioremap(&pdev->dev, rc);
+ if (host->io_base == NULL) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ return -ENOMEM;
+ }
+
+ if (pdev->dev.of_node)
+ host->ncfg = lpc32xx_parse_dt(&pdev->dev);
+ else
+ host->ncfg = pdev->dev.platform_data;
+ if (!host->ncfg) {
+ dev_err(&pdev->dev, "Missing platform data\n");
+ return -ENOENT;
+ }
+ if (host->ncfg->wp_gpio == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (gpio_is_valid(host->ncfg->wp_gpio) &&
+ gpio_request(host->ncfg->wp_gpio, "NAND WP")) {
+ dev_err(&pdev->dev, "GPIO not available\n");
+ return -EBUSY;
+ }
+ lpc32xx_wp_disable(host);
+
+ mtd = &host->mtd;
+ chip = &host->nand_chip;
+ chip->priv = host;
+ mtd->priv = chip;
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = &pdev->dev;
+
+ /* Get NAND clock */
+ host->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "Clock failure\n");
+ res = -ENOENT;
+ goto err_exit1;
+ }
+ clk_enable(host->clk);
+
+ /* Set NAND IO addresses and command/ready functions */
+ chip->IO_ADDR_R = SLC_DATA(host->io_base);
+ chip->IO_ADDR_W = SLC_DATA(host->io_base);
+ chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
+ chip->dev_ready = lpc32xx_nand_device_ready;
+ chip->chip_delay = 20; /* 20us command delay time */
+
+ /* Init NAND controller */
+ lpc32xx_nand_setup(host);
+
+ platform_set_drvdata(pdev, host);
+
+ /* NAND callbacks for LPC32xx SLC hardware */
+ chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->read_byte = lpc32xx_nand_read_byte;
+ chip->read_buf = lpc32xx_nand_read_buf;
+ chip->write_buf = lpc32xx_nand_write_buf;
+ chip->ecc.read_page_raw = lpc32xx_nand_read_page_raw_syndrome;
+ chip->ecc.read_page = lpc32xx_nand_read_page_syndrome;
+ chip->ecc.write_page_raw = lpc32xx_nand_write_page_raw_syndrome;
+ chip->ecc.write_page = lpc32xx_nand_write_page_syndrome;
+ chip->ecc.write_oob = lpc32xx_nand_write_oob_syndrome;
+ chip->ecc.read_oob = lpc32xx_nand_read_oob_syndrome;
+ chip->ecc.calculate = lpc32xx_nand_ecc_calculate;
+ chip->ecc.correct = nand_correct_data;
+ chip->ecc.strength = 1;
+ chip->ecc.hwctl = lpc32xx_nand_ecc_enable;
+ chip->verify_buf = lpc32xx_verify_buf;
+
+ /* bitflip_threshold's default is defined as ecc_strength anyway.
+ * Unfortunately, it is set only later at add_mtd_device(). Meanwhile
+ * being 0, it causes bad block table scanning errors in
+ * nand_scan_tail(), so preparing it here already. */
+ mtd->bitflip_threshold = chip->ecc.strength;
+
+ /*
+ * Allocate a large enough buffer for a single huge page plus
+ * extra space for the spare area and ECC storage area
+ */
+ host->dma_buf_len = LPC32XX_DMA_DATA_SIZE + LPC32XX_ECC_SAVE_SIZE;
+ host->data_buf = devm_kzalloc(&pdev->dev, host->dma_buf_len,
+ GFP_KERNEL);
+ if (host->data_buf == NULL) {
+ dev_err(&pdev->dev, "Error allocating memory\n");
+ res = -ENOMEM;
+ goto err_exit2;
+ }
+
+ res = lpc32xx_nand_dma_setup(host);
+ if (res) {
+ res = -EIO;
+ goto err_exit2;
+ }
+
+ /* Find NAND device */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ /* OOB and ECC CPU and DMA work areas */
+ host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
+
+ /*
+ * Small page FLASH has a unique OOB layout, but large and huge
+ * page FLASH use the standard layout. Small page FLASH uses a
+ * custom BBT marker layout.
+ */
+ if (mtd->writesize <= 512)
+ chip->ecc.layout = &lpc32xx_nand_oob_16;
+
+ /* These sizes remain the same regardless of page size */
+ chip->ecc.size = 256;
+ chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
+ chip->ecc.prepad = chip->ecc.postpad = 0;
+
+ /* Avoid extra scan if using BBT, setup BBT support */
+ if (host->ncfg->use_bbt) {
+ chip->options |= NAND_SKIP_BBTSCAN;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+ /*
+ * Use a custom BBT marker setup for small page FLASH that
+ * won't interfere with the ECC layout. Large and huge page
+ * FLASH use the standard layout.
+ */
+ if (mtd->writesize <= 512) {
+ chip->bbt_td = &bbt_smallpage_main_descr;
+ chip->bbt_md = &bbt_smallpage_mirror_descr;
+ }
+ }
+
+ /*
+ * Fills out all the uninitialized function pointers with the defaults
+ */
+ if (nand_scan_tail(mtd)) {
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ /* Standard layout in FLASH for bad block tables */
+ if (host->ncfg->use_bbt) {
+ if (nand_default_bbt(mtd) < 0)
+ dev_err(&pdev->dev,
+ "Error initializing default bad block tables\n");
+ }
+
+ mtd->name = "nxp_lpc3220_slc";
+ ppdata.of_node = pdev->dev.of_node;
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
+ host->ncfg->num_parts);
+ if (!res)
+ return res;
+
+ nand_release(mtd);
+
+err_exit3:
+ dma_release_channel(host->dma_chan);
+err_exit2:
+ clk_disable(host->clk);
+ clk_put(host->clk);
+ platform_set_drvdata(pdev, NULL);
+err_exit1:
+ lpc32xx_wp_enable(host);
+ gpio_free(host->ncfg->wp_gpio);
+
+ return res;
+}
+
+/*
+ * Remove NAND device.
+ */
+static int __devexit lpc32xx_nand_remove(struct platform_device *pdev)
+{
+ uint32_t tmp;
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+ dma_release_channel(host->dma_chan);
+
+ /* Force CE high */
+ tmp = readl(SLC_CTRL(host->io_base));
+ tmp &= ~SLCCFG_CE_LOW;
+ writel(tmp, SLC_CTRL(host->io_base));
+
+ clk_disable(host->clk);
+ clk_put(host->clk);
+ platform_set_drvdata(pdev, NULL);
+ lpc32xx_wp_enable(host);
+ gpio_free(host->ncfg->wp_gpio);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_nand_resume(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Re-enable NAND clock */
+ clk_enable(host->clk);
+
+ /* Fresh init of NAND controller */
+ lpc32xx_nand_setup(host);
+
+ /* Disable write protect */
+ lpc32xx_wp_disable(host);
+
+ return 0;
+}
+
+static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
+{
+ uint32_t tmp;
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Force CE high */
+ tmp = readl(SLC_CTRL(host->io_base));
+ tmp &= ~SLCCFG_CE_LOW;
+ writel(tmp, SLC_CTRL(host->io_base));
+
+ /* Enable write protect for safety */
+ lpc32xx_wp_enable(host);
+
+ /* Disable clock */
+ clk_disable(host->clk);
+
+ return 0;
+}
+
+#else
+#define lpc32xx_nand_resume NULL
+#define lpc32xx_nand_suspend NULL
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id lpc32xx_nand_match[] = {
+ { .compatible = "nxp,lpc3220-slc" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
+#endif
+
+static struct platform_driver lpc32xx_nand_driver = {
+ .probe = lpc32xx_nand_probe,
+ .remove = __devexit_p(lpc32xx_nand_remove),
+ .resume = lpc32xx_nand_resume,
+ .suspend = lpc32xx_nand_suspend,
+ .driver = {
+ .name = LPC32XX_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lpc32xx_nand_match),
+ },
+};
+
+module_platform_driver(lpc32xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX SLC controller");
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2() (cpu_is_mx51() || cpu_is_mx53())
-#define nfc_is_v3() nfc_is_v3_2()
+#define nfc_is_v3_2a() cpu_is_mx51()
+#define nfc_is_v3_2b() cpu_is_mx53()
/* Addresses for NFC registers */
#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5)
#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
-#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_PPB(x, shift) (((x) & 0x3) << shift)
#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12)
#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
int spare_len;
int eccbytes;
int eccsize;
+ int ppb_shift;
};
struct mxc_nand_host {
if (chip == -1) {
/* Disable the NFC clock */
if (host->clk_act) {
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
host->clk_act = 0;
}
return;
if (!host->clk_act) {
/* Enable the NFC clock */
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
host->clk_act = 1;
}
}
if (mtd->writesize) {
- config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6);
+ config2 |= NFC_V3_CONFIG2_PPB(
+ ffs(mtd->erasesize / mtd->writesize) - 6,
+ host->devtype_data->ppb_shift);
host->eccsize = get_eccsize(mtd);
if (host->eccsize == 8)
config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
.eccsize = 0,
};
-/* v3: i.MX51, i.MX53 */
+/* v3.2a: i.MX51 */
static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
.preset = preset_v3,
.send_cmd = send_cmd_v3,
.spare_len = 64,
.eccbytes = 0,
.eccsize = 0,
+ .ppb_shift = 7,
+};
+
+/* v3.2b: i.MX53 */
+static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
+ .preset = preset_v3,
+ .send_cmd = send_cmd_v3,
+ .send_addr = send_addr_v3,
+ .send_page = send_page_v3,
+ .send_read_id = send_read_id_v3,
+ .get_dev_status = get_dev_status_v3,
+ .check_int = check_int_v3,
+ .irq_control = irq_control_v3,
+ .get_ecc_status = get_ecc_status_v3,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 1,
+ .regs_offset = 0,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0x1e00,
+ .spare_len = 64,
+ .eccbytes = 0,
+ .eccsize = 0,
+ .ppb_shift = 8,
};
#ifdef CONFIG_OF_MTD
}, {
.compatible = "fsl,imx51-nand",
.data = &imx51_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx53-nand",
+ .data = &imx53_nand_devtype_data,
},
{ /* sentinel */ }
};
host->devtype_data = &imx27_nand_devtype_data;
} else if (nfc_is_v21()) {
host->devtype_data = &imx25_nand_devtype_data;
- } else if (nfc_is_v3_2()) {
+ } else if (nfc_is_v3_2a()) {
host->devtype_data = &imx51_nand_devtype_data;
+ } else if (nfc_is_v3_2b()) {
+ host->devtype_data = &imx53_nand_devtype_data;
} else
BUG();
int err = 0;
/* Allocate memory for MTD device structure and private data */
- host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
- NAND_MAX_OOBSIZE, GFP_KERNEL);
+ host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host) +
+ NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL);
if (!host)
return -ENOMEM;
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->clk = clk_get(&pdev->dev, "nfc");
- if (IS_ERR(host->clk)) {
- err = PTR_ERR(host->clk);
- goto eclk;
- }
+ host->clk = devm_clk_get(&pdev->dev, "nfc");
+ if (IS_ERR(host->clk))
+ return PTR_ERR(host->clk);
- clk_prepare_enable(host->clk);
- host->clk_act = 1;
+ err = mxcnd_probe_dt(host);
+ if (err > 0)
+ err = mxcnd_probe_pdata(host);
+ if (err < 0)
+ return err;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- err = -ENODEV;
- goto eres;
- }
+ if (host->devtype_data->needs_ip) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+ host->regs_ip = devm_request_and_ioremap(&pdev->dev, res);
+ if (!host->regs_ip)
+ return -ENOMEM;
- host->base = ioremap(res->start, resource_size(res));
- if (!host->base) {
- err = -ENOMEM;
- goto eres;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ } else {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
}
- host->main_area0 = host->base;
+ if (!res)
+ return -ENODEV;
- err = mxcnd_probe_dt(host);
- if (err > 0)
- err = mxcnd_probe_pdata(host);
- if (err < 0)
- goto eirq;
+ host->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!host->base)
+ return -ENOMEM;
+
+ host->main_area0 = host->base;
if (host->devtype_data->regs_offset)
host->regs = host->base + host->devtype_data->regs_offset;
this->ecc.size = 512;
this->ecc.layout = host->devtype_data->ecclayout_512;
- if (host->devtype_data->needs_ip) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res) {
- err = -ENODEV;
- goto eirq;
- }
- host->regs_ip = ioremap(res->start, resource_size(res));
- if (!host->regs_ip) {
- err = -ENOMEM;
- goto eirq;
- }
- }
-
if (host->pdata.hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
*/
host->devtype_data->irq_control(host, 0);
- err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
+ err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
+ IRQF_DISABLED, DRIVER_NAME, host);
if (err)
- goto eirq;
+ return err;
+
+ clk_prepare_enable(host->clk);
+ host->clk_act = 1;
/*
* Now that we "own" the interrupt make sure the interrupt mask bit is
return 0;
escan:
- free_irq(host->irq, host);
-eirq:
- if (host->regs_ip)
- iounmap(host->regs_ip);
- iounmap(host->base);
-eres:
- clk_put(host->clk);
-eclk:
- kfree(host);
+ clk_disable_unprepare(host->clk);
return err;
}
{
struct mxc_nand_host *host = platform_get_drvdata(pdev);
- clk_put(host->clk);
-
platform_set_drvdata(pdev, NULL);
nand_release(&host->mtd);
- free_irq(host->irq, host);
- if (host->regs_ip)
- iounmap(host->regs_ip);
- iounmap(host->base);
- kfree(host);
return 0;
}
oobreadlen -= toread;
}
}
-
- if (!(chip->options & NAND_NO_READRDY)) {
- /* Apply delay or wait for ready/busy pin */
- if (!chip->dev_ready)
- udelay(chip->chip_delay);
- else
- nand_wait_ready(mtd);
- }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
ops.len = len;
ops.datbuf = buf;
ops.oobbuf = NULL;
- ops.mode = 0;
+ ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_read_ops(mtd, from, &ops);
*retlen = ops.retlen;
nand_release_device(mtd);
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
- if (!(chip->options & NAND_NO_READRDY)) {
- /* Apply delay or wait for ready/busy pin */
- if (!chip->dev_ready)
- udelay(chip->chip_delay);
- else
- nand_wait_ready(mtd);
- }
-
readlen -= len;
if (!readlen)
break;
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
-static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
if (oob_required)
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
/**
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
-static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
+static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
size = mtd->oobsize - (oob - chip->oob_poi);
if (size)
chip->write_buf(mtd, oob, size);
+
+ return 0;
}
/**
* nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
*/
-static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
for (i = 0; i < chip->ecc.total; i++)
chip->oob_poi[eccpos[i]] = ecc_calc[i];
- chip->ecc.write_page_raw(mtd, chip, buf, 1);
+ return chip->ecc.write_page_raw(mtd, chip, buf, 1);
}
/**
* @buf: data buffer
* @oob_required: must write chip->oob_poi to OOB
*/
-static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
int i, eccsize = chip->ecc.size;
chip->oob_poi[eccpos[i]] = ecc_calc[i];
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
/**
* The hw generator calculates the error syndrome automatically. Therefore we
* need a special oob layout and handling.
*/
-static void nand_write_page_syndrome(struct mtd_info *mtd,
+static int nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
i = mtd->oobsize - (oob - chip->oob_poi);
if (i)
chip->write_buf(mtd, oob, i);
+
+ return 0;
}
/**
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
if (unlikely(raw))
- chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
+ status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
else
- chip->ecc.write_page(mtd, chip, buf, oob_required);
+ status = chip->ecc.write_page(mtd, chip, buf, oob_required);
+
+ if (status < 0)
+ return status;
/*
* Cached progamming disabled for now. Not sure if it's worth the
ops.len = len;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
- ops.mode = 0;
+ ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
ops.len = len;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
- ops.mode = 0;
+ ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
*retlen = ops.retlen;
nand_release_device(mtd);
*busw = NAND_BUSWIDTH_16;
chip->options &= ~NAND_CHIPOPTIONS_MSK;
- chip->options |= NAND_NO_READRDY & NAND_CHIPOPTIONS_MSK;
pr_info("ONFI flash detected\n");
return 1;
* BBT on flash. If a BBT is found then the contents are read and the memory
* based BBT is created. If a mirrored BBT is selected then the mirror is
* searched too and the versions are compared. If the mirror has a greater
- * version number than the mirror BBT is used to build the memory based BBT.
+ * version number, then the mirror BBT is used to build the memory based BBT.
* If the tables are not versioned, then we "or" the bad block information.
* If one of the BBTs is out of date or does not exist it is (re)created.
* If no BBT exists at all then the device is scanned for factory marked
static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
{
- int ret;
-
- ret = memcmp(buf, td->pattern, td->len);
- if (!ret)
- return ret;
- return -1;
+ if (memcmp(buf, td->pattern, td->len))
+ return -1;
+ return 0;
}
/**
/* Read the mirror version, if available */
if (md && (md->options & NAND_BBT_VERSION)) {
scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
- mtd->writesize, td);
+ mtd->writesize, md);
md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
pr_info("Bad block table at page %d, version 0x%02X\n",
md->pages[0], md->version[0]);
.pattern = mirror_pattern
};
-static struct nand_bbt_descr bbt_main_no_bbt_descr = {
+static struct nand_bbt_descr bbt_main_no_oob_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
| NAND_BBT_NO_OOB,
.pattern = bbt_pattern
};
-static struct nand_bbt_descr bbt_mirror_no_bbt_descr = {
+static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
| NAND_BBT_NO_OOB,
/* Use the default pattern descriptors */
if (!this->bbt_td) {
if (this->bbt_options & NAND_BBT_NO_OOB) {
- this->bbt_td = &bbt_main_no_bbt_descr;
- this->bbt_md = &bbt_mirror_no_bbt_descr;
+ this->bbt_td = &bbt_main_no_oob_descr;
+ this->bbt_md = &bbt_mirror_no_oob_descr;
} else {
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
* These are the new chips with large page size. The pagesize and the
* erasesize is determined from the extended id bytes
*/
-#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY)
+#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
/* 512 Megabit */
* writes possible, but not implemented now
*/
{"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000,
- NAND_IS_AND | NAND_NO_READRDY | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
+ NAND_IS_AND | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
{NULL,}
};
{NAND_MFR_STMICRO, "ST Micro"},
{NAND_MFR_HYNIX, "Hynix"},
{NAND_MFR_MICRON, "Micron"},
- {NAND_MFR_AMD, "AMD"},
+ {NAND_MFR_AMD, "AMD/Spansion"},
{NAND_MFR_MACRONIX, "Macronix"},
+ {NAND_MFR_EON, "Eon"},
{0x0, "Unknown"}
};
info->state = STATE_IDLE;
}
-static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
+static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
}
static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
chip->ecc.size = host->page_size;
chip->ecc.strength = 1;
- chip->options |= NAND_NO_READRDY;
if (host->reg_ndcr & NDCR_DWIDTH_M)
chip->options |= NAND_BUSWIDTH_16;
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
};
static struct nand_ecclayout flctl_4secc_oob_64 = {
- .eccbytes = 10,
- .eccpos = {48, 49, 50, 51, 52, 53, 54, 55, 56, 57},
+ .eccbytes = 4 * 10,
+ .eccpos = {
+ 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
.oobfree = {
- {.offset = 60,
- . length = 4} },
+ {.offset = 2, .length = 4},
+ {.offset = 16, .length = 6},
+ {.offset = 32, .length = 6},
+ {.offset = 48, .length = 6} },
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr flctl_4secc_largepage = {
.options = NAND_BBT_SCAN2NDPAGE,
- .offs = 58,
+ .offs = 0,
.len = 2,
.pattern = scan_ff_pattern,
};
static void empty_fifo(struct sh_flctl *flctl)
{
- writel(0x000c0000, FLINTDMACR(flctl)); /* FIFO Clear */
- writel(0x00000000, FLINTDMACR(flctl)); /* Clear Error flags */
+ writel(flctl->flintdmacr_base | AC1CLR | AC0CLR, FLINTDMACR(flctl));
+ writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
}
static void start_translation(struct sh_flctl *flctl)
timeout_error(flctl, __func__);
}
-static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number)
+static enum flctl_ecc_res_t wait_recfifo_ready
+ (struct sh_flctl *flctl, int sector_number)
{
uint32_t timeout = LOOP_TIMEOUT_MAX;
- int checked[4];
void __iomem *ecc_reg[4];
int i;
+ int state = FL_SUCCESS;
uint32_t data, size;
- memset(checked, 0, sizeof(checked));
-
+ /*
+ * First this loops checks in FLDTCNTR if we are ready to read out the
+ * oob data. This is the case if either all went fine without errors or
+ * if the bottom part of the loop corrected the errors or marked them as
+ * uncorrectable and the controller is given time to push the data into
+ * the FIFO.
+ */
while (timeout--) {
+ /* check if all is ok and we can read out the OOB */
size = readl(FLDTCNTR(flctl)) >> 24;
- if (size & 0xFF)
- return 0; /* success */
+ if ((size & 0xFF) == 4)
+ return state;
+
+ /* check if a correction code has been calculated */
+ if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) {
+ /*
+ * either we wait for the fifo to be filled or a
+ * correction pattern is being generated
+ */
+ udelay(1);
+ continue;
+ }
+
+ /* check for an uncorrectable error */
+ if (readl(FL4ECCCR(flctl)) & _4ECCFA) {
+ /* check if we face a non-empty page */
+ for (i = 0; i < 512; i++) {
+ if (flctl->done_buff[i] != 0xff) {
+ state = FL_ERROR; /* can't correct */
+ break;
+ }
+ }
- if (readl(FL4ECCCR(flctl)) & _4ECCFA)
- return 1; /* can't correct */
+ if (state == FL_SUCCESS)
+ dev_dbg(&flctl->pdev->dev,
+ "reading empty sector %d, ecc error ignored\n",
+ sector_number);
- udelay(1);
- if (!(readl(FL4ECCCR(flctl)) & _4ECCEND))
+ writel(0, FL4ECCCR(flctl));
continue;
+ }
/* start error correction */
ecc_reg[0] = FL4ECCRESULT0(flctl);
ecc_reg[3] = FL4ECCRESULT3(flctl);
for (i = 0; i < 3; i++) {
+ uint8_t org;
+ int index;
+
data = readl(ecc_reg[i]);
- if (data != INIT_FL4ECCRESULT_VAL && !checked[i]) {
- uint8_t org;
- int index;
-
- if (flctl->page_size)
- index = (512 * sector_number) +
- (data >> 16);
- else
- index = data >> 16;
-
- org = flctl->done_buff[index];
- flctl->done_buff[index] = org ^ (data & 0xFF);
- checked[i] = 1;
- }
- }
+ if (flctl->page_size)
+ index = (512 * sector_number) +
+ (data >> 16);
+ else
+ index = data >> 16;
+
+ org = flctl->done_buff[index];
+ flctl->done_buff[index] = org ^ (data & 0xFF);
+ }
+ state = FL_REPAIRABLE;
writel(0, FL4ECCCR(flctl));
}
timeout_error(flctl, __func__);
- return 1; /* timeout */
+ return FL_TIMEOUT; /* timeout */
}
static void wait_wecfifo_ready(struct sh_flctl *flctl)
{
int i, len_4align;
unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
- void *fifo_addr = (void *)FLDTFIFO(flctl);
len_4align = (rlen + 3) / 4;
for (i = 0; i < len_4align; i++) {
wait_rfifo_ready(flctl);
- buf[i] = readl(fifo_addr);
+ buf[i] = readl(FLDTFIFO(flctl));
buf[i] = be32_to_cpu(buf[i]);
}
}
-static int read_ecfiforeg(struct sh_flctl *flctl, uint8_t *buff, int sector)
+static enum flctl_ecc_res_t read_ecfiforeg
+ (struct sh_flctl *flctl, uint8_t *buff, int sector)
{
int i;
+ enum flctl_ecc_res_t res;
unsigned long *ecc_buf = (unsigned long *)buff;
- void *fifo_addr = (void *)FLECFIFO(flctl);
- for (i = 0; i < 4; i++) {
- if (wait_recfifo_ready(flctl , sector))
- return 1;
- ecc_buf[i] = readl(fifo_addr);
- ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+ res = wait_recfifo_ready(flctl , sector);
+
+ if (res != FL_ERROR) {
+ for (i = 0; i < 4; i++) {
+ ecc_buf[i] = readl(FLECFIFO(flctl));
+ ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+ }
}
- return 0;
+ return res;
}
static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
}
}
+static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+ int i, len_4align;
+ unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
+
+ len_4align = (rlen + 3) / 4;
+ for (i = 0; i < len_4align; i++) {
+ wait_wecfifo_ready(flctl);
+ writel(cpu_to_be32(data[i]), FLECFIFO(flctl));
+ }
+}
+
static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
- int i, eccsize = chip->ecc.size;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- uint8_t *p = buf;
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
-
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
- chip->read_buf(mtd, p, eccsize);
-
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- if (flctl->hwecc_cant_correct[i])
- mtd->ecc_stats.failed++;
- else
- mtd->ecc_stats.corrected += 0; /* FIXME */
- }
-
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
-static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+static int flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
- int i, eccsize = chip->ecc.size;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- const uint8_t *p = buf;
-
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
- chip->write_buf(mtd, p, eccsize);
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
}
static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
int sector, page_sectors;
+ enum flctl_ecc_res_t ecc_result;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
- FLCMNCR(flctl));
+ page_sectors = flctl->page_size ? 4 : 1;
set_cmd_regs(mtd, NAND_CMD_READ0,
(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
- for (sector = 0; sector < page_sectors; sector++) {
- int ret;
+ writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
+ FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
+ empty_fifo(flctl);
+ start_translation(flctl);
- start_translation(flctl);
+ for (sector = 0; sector < page_sectors; sector++) {
read_fiforeg(flctl, 512, 512 * sector);
- ret = read_ecfiforeg(flctl,
+ ecc_result = read_ecfiforeg(flctl,
&flctl->done_buff[mtd->writesize + 16 * sector],
sector);
- if (ret)
- flctl->hwecc_cant_correct[sector] = 1;
-
- writel(0x0, FL4ECCCR(flctl));
- wait_completion(flctl);
+ switch (ecc_result) {
+ case FL_REPAIRABLE:
+ dev_info(&flctl->pdev->dev,
+ "applied ecc on page 0x%x", page_addr);
+ flctl->mtd.ecc_stats.corrected++;
+ break;
+ case FL_ERROR:
+ dev_warn(&flctl->pdev->dev,
+ "page 0x%x contains corrupted data\n",
+ page_addr);
+ flctl->mtd.ecc_stats.failed++;
+ break;
+ default:
+ ;
+ }
}
+
+ wait_completion(flctl);
+
writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
FLCMNCR(flctl));
}
static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int page_sectors = flctl->page_size ? 4 : 1;
+ int i;
set_cmd_regs(mtd, NAND_CMD_READ0,
(NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
empty_fifo(flctl);
- if (flctl->page_size) {
- int i;
- /* In case that the page size is 2k */
- for (i = 0; i < 16 * 3; i++)
- flctl->done_buff[i] = 0xFF;
-
- set_addr(mtd, 3 * 528 + 512, page_addr);
- writel(16, FLDTCNTR(flctl));
- start_translation(flctl);
- read_fiforeg(flctl, 16, 16 * 3);
- wait_completion(flctl);
- } else {
- /* In case that the page size is 512b */
- set_addr(mtd, 512, page_addr);
+ for (i = 0; i < page_sectors; i++) {
+ set_addr(mtd, (512 + 16) * i + 512 , page_addr);
writel(16, FLDTCNTR(flctl));
start_translation(flctl);
- read_fiforeg(flctl, 16, 0);
+ read_fiforeg(flctl, 16, 16 * i);
wait_completion(flctl);
}
}
static void execmd_write_page_sector(struct mtd_info *mtd)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int i, page_addr = flctl->seqin_page_addr;
+ int page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ page_sectors = flctl->page_size ? 4 : 1;
set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
- for (sector = 0; sector < page_sectors; sector++) {
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
+ empty_fifo(flctl);
+ writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
+ start_translation(flctl);
- start_translation(flctl);
+ for (sector = 0; sector < page_sectors; sector++) {
write_fiforeg(flctl, 512, 512 * sector);
-
- for (i = 0; i < 4; i++) {
- wait_wecfifo_ready(flctl); /* wait for write ready */
- writel(0xFFFFFFFF, FLECFIFO(flctl));
- }
- wait_completion(flctl);
+ write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
}
+ wait_completion(flctl);
writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
}
int page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
- if (flctl->page_size) {
- sector = 3;
- page_sectors = 4;
- } else {
- sector = 0;
- page_sectors = 1;
- }
+ page_sectors = flctl->page_size ? 4 : 1;
set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
- for (; sector < page_sectors; sector++) {
+ for (sector = 0; sector < page_sectors; sector++) {
empty_fifo(flctl);
set_addr(mtd, sector * 528 + 512, page_addr);
writel(16, FLDTCNTR(flctl)); /* set read size */
chip->ecc.mode = NAND_ECC_HW;
/* 4 symbols ECC enabled */
- flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02;
+ flctl->flcmncr_base |= _4ECCEN;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
}
return 0;
}
+static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
+{
+ struct sh_flctl *flctl = dev_id;
+
+ dev_err(&flctl->pdev->dev, "flste irq: %x\n", readl(FLINTDMACR(flctl)));
+ writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
+
+ return IRQ_HANDLED;
+}
+
static int __devinit flctl_probe(struct platform_device *pdev)
{
struct resource *res;
struct nand_chip *nand;
struct sh_flctl_platform_data *pdata;
int ret = -ENXIO;
+ int irq;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
goto err_iomap;
}
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get flste irq data\n");
+ goto err_flste;
+ }
+
+ ret = request_irq(irq, flctl_handle_flste, IRQF_SHARED, "flste", flctl);
+ if (ret) {
+ dev_err(&pdev->dev, "request interrupt failed.\n");
+ goto err_flste;
+ }
+
platform_set_drvdata(pdev, flctl);
flctl_mtd = &flctl->mtd;
nand = &flctl->chip;
flctl_mtd->priv = nand;
flctl->pdev = pdev;
- flctl->flcmncr_base = pdata->flcmncr_val;
flctl->hwecc = pdata->has_hwecc;
flctl->holden = pdata->use_holden;
+ flctl->flcmncr_base = pdata->flcmncr_val;
+ flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
/* Set address of hardware control function */
/* 20 us command delay time */
err_chip:
pm_runtime_disable(&pdev->dev);
+ free_irq(irq, flctl);
+err_flste:
+ iounmap(flctl->reg);
err_iomap:
kfree(flctl);
return ret;
nand_release(&flctl->mtd);
pm_runtime_disable(&pdev->dev);
+ free_irq(platform_get_irq(pdev, 0), flctl);
+ iounmap(flctl->reg);
kfree(flctl);
return 0;
#include <linux/mtd/mtd.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/random.h>
#define PRINT_PREF KERN_INFO "mtd_speedtest: "
static int pgcnt;
static int goodebcnt;
static struct timeval start, finish;
-static unsigned long next = 1;
-
-static inline unsigned int simple_rand(void)
-{
- next = next * 1103515245 + 12345;
- return (unsigned int)((next / 65536) % 32768);
-}
-
-static inline void simple_srand(unsigned long seed)
-{
- next = seed;
-}
static void set_random_data(unsigned char *buf, size_t len)
{
size_t i;
for (i = 0; i < len; ++i)
- buf[i] = simple_rand();
+ buf[i] = random32();
}
static int erase_eraseblock(int ebnum)
goto out;
}
- simple_srand(1);
set_random_data(iobuf, mtd->erasesize);
err = scan_for_bad_eraseblocks();
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
+#include <linux/random.h>
#define PRINT_PREF KERN_INFO "mtd_stresstest: "
static int bufsize;
static int ebcnt;
static int pgcnt;
-static unsigned long next = 1;
-
-static inline unsigned int simple_rand(void)
-{
- next = next * 1103515245 + 12345;
- return (unsigned int)((next / 65536) % 32768);
-}
-
-static inline void simple_srand(unsigned long seed)
-{
- next = seed;
-}
static int rand_eb(void)
{
- int eb;
+ unsigned int eb;
again:
- if (ebcnt < 32768)
- eb = simple_rand();
- else
- eb = (simple_rand() << 15) | simple_rand();
+ eb = random32();
/* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */
eb %= (ebcnt - 1);
if (bbt[eb])
static int rand_offs(void)
{
- int offs;
+ unsigned int offs;
- if (bufsize < 32768)
- offs = simple_rand();
- else
- offs = (simple_rand() << 15) | simple_rand();
+ offs = random32();
offs %= bufsize;
return offs;
}
static int rand_len(int offs)
{
- int len;
+ unsigned int len;
- if (bufsize < 32768)
- len = simple_rand();
- else
- len = (simple_rand() << 15) | simple_rand();
+ len = random32();
len %= (bufsize - offs);
return len;
}
static int do_operation(void)
{
- if (simple_rand() & 1)
+ if (random32() & 1)
return do_read();
else
return do_write();
}
for (i = 0; i < ebcnt; i++)
offsets[i] = mtd->erasesize;
- simple_srand(current->pid);
for (i = 0; i < bufsize; i++)
- writebuf[i] = simple_rand();
+ writebuf[i] = random32();
err = scan_for_bad_eraseblocks();
if (err)
#define NAND_BBT_LASTBLOCK 0x00000010
/* The bbt is at the given page, else we must scan for the bbt */
#define NAND_BBT_ABSPAGE 0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH 0x00000040
/* bbt is stored per chip on multichip devices */
#define NAND_BBT_PERCHIP 0x00000080
/* bbt has a version counter at offset veroffs */
* OOB area. This option is passed to the default bad block table function.
*/
#define NAND_BBT_USE_FLASH 0x00020000
-/* Do not store flash based bad block table in OOB area; store it in-band */
+/*
+ * Do not store flash based bad block table marker in the OOB area; store it
+ * in-band.
+ */
#define NAND_BBT_NO_OOB 0x00040000
/*
* Do not write new bad block markers to OOB; useful, e.g., when ECC covers
int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
const u_char *buf);
-static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from,
- struct mtd_oob_ops *ops)
-{
- ops->retlen = ops->oobretlen = 0;
- if (!mtd->_read_oob)
- return -EOPNOTSUPP;
- return mtd->_read_oob(mtd, from, ops);
-}
+int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
-/*
- * Chip does not require ready check on read. True
- * for all large page devices, as they do not support
- * autoincrement.
- */
-#define NAND_NO_READRDY 0x00000100
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
uint8_t *calc_ecc);
int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
- void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required);
int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offs, uint32_t len, uint8_t *buf);
- void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required);
int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
int page);
#define NAND_MFR_MICRON 0x2c
#define NAND_MFR_AMD 0x01
#define NAND_MFR_MACRONIX 0xc2
+#define NAND_MFR_EON 0x92
/**
* struct nand_flash_dev - NAND Flash Device ID Structure
#define FLERRADR(f) (f->reg + 0x98)
/* FLCMNCR control bits */
-#define ECCPOS2 (0x1 << 25)
#define _4ECCCNTEN (0x1 << 24)
#define _4ECCEN (0x1 << 23)
#define _4ECCCORRECT (0x1 << 22)
#define QTSEL_E (0x1 << 17)
#define ENDIAN (0x1 << 16) /* 1 = little endian */
#define FCKSEL_E (0x1 << 15)
-#define ECCPOS_00 (0x00 << 12)
-#define ECCPOS_01 (0x01 << 12)
-#define ECCPOS_02 (0x02 << 12)
#define ACM_SACCES_MODE (0x01 << 10)
#define NANWF_E (0x1 << 9)
#define SE_D (0x1 << 8) /* Spare area disable */
#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */
#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */
+/* FLINTDMACR control bits */
+#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */
+#define AC1CLR (0x1 << 19) /* ECC FIFO clear */
+#define AC0CLR (0x1 << 18) /* Data FIFO clear */
+#define ECERB (0x1 << 9) /* ECC error */
+#define STERB (0x1 << 8) /* Status error */
+#define STERINTE (0x1 << 4) /* Status error enable */
+
/* FLTRCR control bits */
#define TRSTRT (0x1 << 0) /* translation start */
#define TREND (0x1 << 1) /* translation end */
#define _4ECCEND (0x1 << 1) /* 4 symbols end */
#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
-#define INIT_FL4ECCRESULT_VAL 0x03FF03FF
#define LOOP_TIMEOUT_MAX 0x00010000
+enum flctl_ecc_res_t {
+ FL_SUCCESS,
+ FL_REPAIRABLE,
+ FL_ERROR,
+ FL_TIMEOUT
+};
+
struct sh_flctl {
struct mtd_info mtd;
struct nand_chip chip;
uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
uint32_t flcmncr_base; /* base value of FLCMNCR */
-
- int hwecc_cant_correct[4];
+ uint32_t flintdmacr_base; /* irq enable bits */
unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */