#include <net/iw_handler.h>
#include <net/ieee80211.h>
+#include <linux/scatterlist.h>
+#include <linux/crypto.h>
+
#include "hermes_rid.h"
#include "hermes_dld.h"
#include "orinoco.h"
static int __orinoco_program_rids(struct net_device *dev);
static void __orinoco_set_multicast_list(struct net_device *dev);
+/********************************************************************/
+/* Michael MIC crypto setup */
+/********************************************************************/
+#define MICHAEL_MIC_LEN 8
+static int orinoco_mic_init(struct orinoco_private *priv)
+{
+ priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+ if (IS_ERR(priv->tx_tfm_mic)) {
+ printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+ "crypto API michael_mic\n");
+ priv->tx_tfm_mic = NULL;
+ return -ENOMEM;
+ }
+
+ priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0);
+ if (IS_ERR(priv->rx_tfm_mic)) {
+ printk(KERN_DEBUG "orinoco_mic_init: could not allocate "
+ "crypto API michael_mic\n");
+ priv->rx_tfm_mic = NULL;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void orinoco_mic_free(struct orinoco_private *priv)
+{
+ if (priv->tx_tfm_mic)
+ crypto_free_hash(priv->tx_tfm_mic);
+ if (priv->rx_tfm_mic)
+ crypto_free_hash(priv->rx_tfm_mic);
+}
+
+static int michael_mic(struct crypto_hash *tfm_michael, u8 *key,
+ u8 *da, u8 *sa, u8 priority,
+ u8 *data, size_t data_len, u8 *mic)
+{
+ struct hash_desc desc;
+ struct scatterlist sg[2];
+ u8 hdr[ETH_HLEN + 2]; /* size of header + padding */
+
+ if (tfm_michael == NULL) {
+ printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+ return -1;
+ }
+
+ /* Copy header into buffer. We need the padding on the end zeroed */
+ memcpy(&hdr[0], da, ETH_ALEN);
+ memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN);
+ hdr[ETH_ALEN*2] = priority;
+ hdr[ETH_ALEN*2+1] = 0;
+ hdr[ETH_ALEN*2+2] = 0;
+ hdr[ETH_ALEN*2+3] = 0;
+
+ /* Use scatter gather to MIC header and data in one go */
+ sg_init_table(sg, 2);
+ sg_set_buf(&sg[0], hdr, sizeof(hdr));
+ sg_set_buf(&sg[1], data, data_len);
+
+ if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN))
+ return -1;
+
+ desc.tfm = tfm_michael;
+ desc.flags = 0;
+ return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr),
+ mic);
+}
+
/********************************************************************/
/* Internal helper functions */
/********************************************************************/
int err = 0;
u16 txfid = priv->txfid;
struct ethhdr *eh;
- int data_off;
int tx_control;
unsigned long flags;
if (skb->len < ETH_HLEN)
goto drop;
- eh = (struct ethhdr *)skb->data;
-
tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
+ if (priv->encode_alg == IW_ENCODE_ALG_TKIP)
+ tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
+ HERMES_TXCTRL_MIC;
+
if (priv->has_alt_txcntl) {
/* WPA enabled firmwares have tx_cntl at the end of
* the 802.11 header. So write zeroed descriptor and
HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
}
+ eh = (struct ethhdr *)skb->data;
+
/* Encapsulate Ethernet-II frames */
if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
struct header_struct {
/* Strip destination and source from the data */
skb_pull(skb, 2 * ETH_ALEN);
- data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr);
/* And move them to a separate header */
memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
- err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
- txfid, HERMES_802_3_OFFSET);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing packet "
- "header to BAP\n", dev->name, err);
- goto busy;
+ /* Insert the SNAP header */
+ if (skb_headroom(skb) < sizeof(hdr)) {
+ printk(KERN_ERR
+ "%s: Not enough headroom for 802.2 headers %d\n",
+ dev->name, skb_headroom(skb));
+ goto drop;
}
- } else { /* IEEE 802.3 frame */
- data_off = HERMES_802_3_OFFSET;
+ eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
+ memcpy(eh, &hdr, sizeof(hdr));
}
err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
- txfid, data_off);
+ txfid, HERMES_802_3_OFFSET);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
dev->name, err);
goto busy;
}
+ /* Calculate Michael MIC */
+ if (priv->encode_alg == IW_ENCODE_ALG_TKIP) {
+ u8 mic_buf[MICHAEL_MIC_LEN + 1];
+ u8 *mic;
+ size_t offset;
+ size_t len;
+
+ if (skb->len % 2) {
+ /* MIC start is on an odd boundary */
+ mic_buf[0] = skb->data[skb->len - 1];
+ mic = &mic_buf[1];
+ offset = skb->len - 1;
+ len = MICHAEL_MIC_LEN + 1;
+ } else {
+ mic = &mic_buf[0];
+ offset = skb->len;
+ len = MICHAEL_MIC_LEN;
+ }
+
+ michael_mic(priv->tx_tfm_mic,
+ priv->tkip_key[priv->tx_key].tx_mic,
+ eh->h_dest, eh->h_source, 0 /* priority */,
+ skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
+
+ /* Write the MIC */
+ err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
+ txfid, HERMES_802_3_OFFSET + offset);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
+ dev->name, err);
+ goto busy;
+ }
+ }
+
/* Finally, we actually initiate the send */
netif_stop_queue(dev);
}
dev->trans_start = jiffies;
- stats->tx_bytes += data_off + skb->len;
+ stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
goto ok;
drop:
stats->rx_dropped++;
}
+/* Get tsc from the firmware */
+static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key,
+ u8 *tsc)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
+
+ if ((key < 0) || (key > 4))
+ return -EINVAL;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
+ sizeof(tsc_arr), NULL, &tsc_arr);
+ if (!err)
+ memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
+
+ return err;
+}
+
static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
goto update_stats;
}
+ /* Payload size does not include Michael MIC. Increase payload
+ * size to read it together with the data. */
+ if (status & HERMES_RXSTAT_MIC)
+ length += MICHAEL_MIC_LEN;
+
/* We need space for the packet data itself, plus an ethernet
header, plus 2 bytes so we can align the IP header on a
32bit boundary, plus 1 byte so we can read in odd length
length = le16_to_cpu(desc->data_len);
fc = le16_to_cpu(desc->frame_ctl);
+ /* Calculate and check MIC */
+ if (status & HERMES_RXSTAT_MIC) {
+ int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
+ HERMES_MIC_KEY_ID_SHIFT);
+ u8 mic[MICHAEL_MIC_LEN];
+ u8 *rxmic;
+ u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
+ desc->addr3 : desc->addr2;
+
+ /* Extract Michael MIC from payload */
+ rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
+
+ skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
+ length -= MICHAEL_MIC_LEN;
+
+ michael_mic(priv->rx_tfm_mic,
+ priv->tkip_key[key_id].rx_mic,
+ desc->addr1,
+ src,
+ 0, /* priority or QoS? */
+ skb->data,
+ skb->len,
+ &mic[0]);
+
+ if (memcmp(mic, rxmic,
+ MICHAEL_MIC_LEN)) {
+ union iwreq_data wrqu;
+ struct iw_michaelmicfailure wxmic;
+ DECLARE_MAC_BUF(mac);
+
+ printk(KERN_WARNING "%s: "
+ "Invalid Michael MIC in data frame from %s, "
+ "using key %i\n",
+ dev->name, print_mac(mac, src), key_id);
+
+ /* TODO: update stats */
+
+ /* Notify userspace */
+ memset(&wxmic, 0, sizeof(wxmic));
+ wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
+ wxmic.flags |= (desc->addr1[0] & 1) ?
+ IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
+ wxmic.src_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
+
+ (void) orinoco_hw_get_tkip_iv(priv, key_id,
+ &wxmic.tsc[0]);
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = sizeof(wxmic);
+ wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
+ (char *) &wxmic);
+
+ goto drop;
+ }
+ }
+
/* Handle decapsulation
* In most cases, the firmware tell us about SNAP frames.
* For some reason, the SNAP frames sent by LinkSys APs
stats->rx_bytes += length;
return;
+
+ drop:
+ dev_kfree_skb(skb);
+ stats->rx_errors++;
+ stats->rx_dropped++;
}
static void orinoco_rx_isr_tasklet(unsigned long data)
else
printk("40-bit key\n");
}
- if (priv->has_wpa)
+ if (priv->has_wpa) {
printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name);
+ if (orinoco_mic_init(priv)) {
+ printk(KERN_ERR "%s: Failed to setup MIC crypto "
+ "algorithm. Disabling WPA support\n", dev->name);
+ priv->has_wpa = 0;
+ }
+ }
/* Now we have the firmware capabilities, allocate appropiate
* sized scan buffers */
dev->set_multicast_list = orinoco_set_multicast_list;
/* we use the default eth_mac_addr for setting the MAC addr */
+ /* Reserve space in skb for the SNAP header */
+ dev->hard_header_len += ENCAPS_OVERHEAD;
+
/* Set up default callbacks */
dev->open = orinoco_open;
dev->stop = orinoco_stop;
tasklet_kill(&priv->rx_tasklet);
priv->wpa_ie_len = 0;
kfree(priv->wpa_ie);
+ orinoco_mic_free(priv);
orinoco_bss_data_free(priv);
free_netdev(dev);
}
projects / mirror_ubuntu-eoan-kernel.git / commitdiff